Used Spiromatic External Flour Silos for sale (6,452)

Condition: used, mileage: 32,867 km, power: 130 kW (176.75 HP), first registration: 07/2025, fuel type: diesel, color: white, gearing type: mechanical, number of seats: 3, total length: 5,986 mm, total width: 2,040 mm, total height: 2,590 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, * 5-year manufacturer's warranty for Germany from initial registration or up to 150,000 km * Tow hitch included * Approved as a 3.5t vehicle * Electronic Stability Program (ESP) * Towing eye at the front * Disc brakes at the front * Front-wheel drive * Multifunction steering wheel * Partition, with fixed window * Three-point automatic seat belts in the front with electric belt tensioner * High roof in vehicle color * Double bench seat in the driver's cab on the right * Seat in the driver's cab on the left * Enhanced interior noise reduction * Heated front seats, separately adjustable * Windshield, heat-protective glass * Central locking "Keyless-Go" without safe lock * Dashboard with special features * Airbags for driver and front passenger, without knee airbag, with front passenger airbag deactivation * Exhaust concept, WLTP3 N1-III, N2//EU6EA * Rubber floor covering in the driver's cab * Wooden floor in the cargo area * Approved as a truck * Sliding door on the right in the cargo/passenger compartment * Exterior mirror on the right, convex plus wide-angle * Exterior mirror on the left, convex plus wide-angle * Hinges for rear doors with enlarged opening angle * Lashing eyes for securing cargo * Lane keeping assistant * Radiator protection grille * C-rails, side and partition * Interior grab handle (entry at partition) * Exterior mirrors, electrically adjustable, separately heated * Immobilizer, electronic * Entry handles on rear pillar, left + right * FPK medium * Tire pressure monitoring system, frequency 433 MHz High * Start/Stop system with recuperation * Park steering assistant * Optional infotainment (MIB3 MP) version 1 * Halogen twin headlights * Front Assist with warning and braking on vehicles, pedestrians, and cyclists * Windshield wiper intermittent control with light/rain sensor * Key for locking system with remote control * 4 speakers (passive) * Cruise control (GRA), electronic * Daytime running light control with assist lights * LED interior lighting concept in passenger/cargo compartment * Preparation for Smart TCO Crjdpfxez I Hzre Ailoh * Seat belt control, E-contact in seat belt buckle * Wired & Wireless App-Connect * Operating voltage 12 V * Comfort telephony, without external antenna connection * 4-cylinder turbo diesel engine 2.0 L/130 kW (4V) TDI * Online service, with OCU, with head unit coding, without WFS connection * Driver alertness system * With socket at the front * 6-speed manual gearbox * Preparation for alcohol interlock * Preparation for interface for external use, with electrical terminal block * With rear view camera system (version 2) * Air conditioning with electronic control * With side wind assist * With predictive speed limiter (pLIM) * With UNECE CS&SU * Pan-European eCall * Basic assistance package including "Intelligent Speed Assist" and cruise control * Professional assistance package including park steering assistant & parking assistance in the front & rear area including side protection * With multifunction camera * Heat-protective glazing * With traffic sign recognition * Digital radio reception * CW-value cladding * Prepared for VW Connect and VW Connect Plus * 4-cylinder diesel engine 2.0L, aggregate 03N.G * External, USB Type-C data and charging ports with increased charging power * Hill start assistant * Parking brake * Front axle "Standard" * Navigation system Discover Media with 26 cm (10.4") touch color display with 4 speakers Conversion service for panel van commercial vehicles possible: e.g. Retrofitti

Condition: used, Used Bibby approximately 400 litre capacity 316 stainless steel vertical reactor. Unit bolted dished top and welded dished bottom heads. Approximately 750mm diameter x 950mm straight side. Internal rated 3.46 bar/full vacuum design pressure at 100 deg.c. External 316 stainless steel jacket rated 6.6 bar/full vacuum design pressure at 100 deg.c. Unit has top entry stainless steel agitator with Lightnin model LS25V drive. Unit is mounted on side support lugs. Cedoykn Rwjpfx Ailerh Specifications: Capacity: 400 L Type of Stainless: 316 Stainless Steel Internal Pressure: 3.5 bar Internal Temperature: 100°C Jacket Pressure: 6.6 bar Jacket Temperature: 100°C Legs/Lugs/Mounting Ring: Lugs

Condition: used, Used Fabrication Technology approximately 5,957 litre total capacity 316 stainless steel vertical reactor. Unit measures approximately 2,150mm tan to tan x 1,600mm diameter. Unit has welded dished top and bottom heads. Internal rated 3 bar/full vacuum design pressure at 5 to 37 deg.c. External stainless steel limpet coil jacket rated 6 bar/full vacuum design pressure at 5 to 37 deg.c. Unit has top entry stainless steel agitator with Lighnin model LS220 drive. Unit is mounted on side supports. Specifications: Crjdpfx Aijzim A Ioleh Capacity: 5,957 L Type of Stainless: 316 Stainless Steel Internal Pressure: 3 bar Internal Temperature: 37°C Jacket Pressure: 6 bar Jacket Temperature: 37°C Legs/Lugs/Mounting Ring: Lugs Dimensions: 2,150mm tan to tan x 1,600mm diameter

Condition: ready for operation (used), Year of construction: 2013, operating hours: 12,486 h, functionality: fully functional, travel distance X-axis: 3,400 mm, travel distance Y-axis: 2,300 mm, travel distance Z-axis: 1,000 mm, spindle speed (max.): 18,000 rpm, controller model: Siemens 840D sl, TECHNICAL DETAILS Travel range X-axis: 3,400 mm Travel range Y-axis: 2,300 mm Travel range Z-axis: 1,000 mm Crsdpjz Izduofx Aileh Rapid traverse X-axis: 60 m/min Rapid traverse Y-axis: 60 m/min Rapid traverse Z-axis: 40 m/min Design: C3 swivel head Swivel range C-axis: 200° Swivel range A-axis: 120° Spindle motor power: 24 kW Spindle mounting: HSK 63 A Spindle speed: 18,000 rpm Spindle cooling: Water cooling Design: Disc tool changer Tool magazine positions: 20 Pick-up positions: 1 Tool diameter: up to Ø 500 mm Table length: 2,000 mm Table width: 1,500 mm Table thickness: 30 mm Grid spacing: 100 x 100 mm Maximum load capacity: 2,000 kg Repeatability: approx. 0.012 mm MACHINE DETAILS CNC control: Siemens 840D sl Spindle operating time: approx. 12,486 hours Power-on hours: approx. 37,297 hours EQUIPMENT 5-axis package: included Advanced Surface: included TCP: included Control panel size: 15 inches Remote maintenance: prepared Workpiece measuring probe: m&h wireless measuring probe Tool measurement: BLUM laser Minimum quantity lubrication: internal and external lubrication Central lubrication: automatic Spray mist extraction: with electrostatic separation Full protective cabin: included Tool changing chamber: separate Technical documentation Operating manual Omlat spare spindle included

Condition: used, This listing is for the ICN Biomedicals Flow Gelaire BSB Class 2 Safety Cabinet The unit is in full working condition and is ready for immediate use Gelaire Class II Biological Safety Cabinets These are widely used internationally and are known for their high safety, energy efficiency, and ergonomic design. Key features include: Airflow & Protection They employ part-recirculating laminar airflow and separate H14 HEPA systems for both supply and exhaust. The design ensures a consistent air barrier at the front opening and maintains sterile downflow inside, all within a biodynamic sealing system that uses negative pressure around any positive-pressure zones. Eco® Control System A smart microprocessor actively regulates airflow to compensate for filter loading, manage power consumption, and maintain safe operational flow rates. Monitoring & Safety Alarms Cabinets offer real-time display of airflow velocities, internal and external temperatures, operation hours, filter life, and fan power factor. Audible and visual alerts warn of airflow deviations or other malfunctions. Standby power-saving modes and “blackout” reporting (in the event of power failure) are included. Construction & Ergonomics The housing features antimicrobial powder-coat finish, and interior zones are stainless steel (Type 304 for work zones, Type 316 for the tray). Hinged or electric sash options (depending on model) and ISO-aligned ergonomic design, noise under 60 dB(A), and smooth operation are standard. Credpfoxhfpqjx Ailsh Options & Accessories Available extras include gas and vacuum taps, splashproof power outlets, UV germicidal lamps, different exhaust configurations (top, left, right), adjustable stands, carbon exhaust filters, armrests, and fumigation seals.

Condition: good (used), Year of construction: 1995, Max. cutting length 3050 mm Material thickness 37 kg/mm² 12 mm Material thickness 70 kg/mm² 8 mm Cutting angle 1.8 degrees Stroke rate 8 - 13 min. Crsdpfxevkw Dvo Ailjh Number of hold-down clamps 12 Drive power 18.5 kW Dimensions L x W x H 4150 x 1950 x 1950 mm Weight 8000 kg Accessories / Special features: • ELGO Type 71 motorized NC positioning control for the backgauge, length approx. 900 mm • If necessary, the toggle lever system allows the machine to operate with only one cylinder at a reduced cutting capacity of approximately 55% of the nominal capacity. This simultaneously increases the cutting sequence for more efficient work with thin sheet metal. Switching from fast to slow is done using a selector switch on the control panel. • Hydro-mechanical drive via a powerful toggle lever • Easy cutting gap adjustment on both sides • 2 cylinders mounted externally on the machine, easily accessible • Vertical, stable guides • Upper and lower blades each with 4 cutting edges • Hydraulic overload protection • Proportional force of the hold-down clamps • The machine frame is a fully welded construction and is machined in one setup (no screwed parts) • Portable electric foot switch • Blades suitable for black sheet metal and stainless steel • Ball transfer units in the table • 1 angle stop • 1 support arm • CE-compliant Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: used, mileage: 20 km, power: 125 kW (169.95 HP), first registration: 10/2026, fuel type: diesel, overall weight: 3,230 kg, color: white, gearing type: automatic, number of seats: 4, total length: 5,570 mm, total width: 1,995 mm, total height: 1,860 mm, loading space length: 2,030 mm, loading space width: 1,840 mm, loading space height: 350 mm, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, Internal number: 4030.NW26.SK21231 ---- Errors and prior sale excepted! Conversion to 3-way tipper * Subframe and tilting frame made of lightweight steel profiles, completely hot-dip galvanized * Aluminum sideboards, silver anodized * Folding sideboards, secured with long-travel latches * Folding rear sideboard * 4 ball bearing tilting supports with Durenthan shell, 2 galvanized pins * 20 mm thick rubber pads between subframe and tilting frame * Hydraulic cylinder drive via an electro-hydraulic unit, operable from the cab * Multi-stage telescopic cylinder with nitrided pistons * Underbody protection with lighting SPECIAL EQUIPMENT * Trailer coupling - 13-pole - for 3.5 t trailer load - 90° rear tailgate opening angle - height of the ball head approx. 50 cm (center) * Cargo area protection liner "sprayed", 12-volt connection on the platform * Package: Outdoor Package 2 - engine and tank protection, steel - 100% rear differential lock * Package: Winter 1 - leather steering wheel, heated - front seats, heated * Auxiliary heater, programmable, with remote control FURTHER EQUIPMENT * ABS * Tow hook, front * All-wheel drive, selectable four-wheel drive * Trailer coupling preparation kit * Audio system 44: Ford SYNC 4A * Exterior mirrors, electrically adjustable, heated, with indicator * Exterior mirror housing in vehicle color * Battery management system * Headliner made of woven fabric, light * Overhead console, illuminated * Diesel particulate filter with SCR * Tachometer * Third brake light * ESP (Electronic Stability Program) * Electric windows, front * High beam assistant * Ford Easy Fuel * FordPass Connect incl. eCall and WLAN hotspot * Heated windshield * Floor mats: carpet floor mats, front * Transmission: 6-speed automatic * Grille insert on the fender * Glove compartment with lid * Easy Lift tailgate * Tailgate handle, black * Rear window, heated * Interior mirror, automatic anti-glare * Instrument panel, digital 8 * Air conditioning, front * Headrests (2) * Radiator grille * Paint: Solid color paint Crodsymicaopfx Aileh * Load securing with protective frame * Steering wheel: Multifunction steering wheel * Steering wheel: Vinyl steering wheel * Center console, front, integrated armrest * Engine cover * Fog lights * Package: Rear seat 18 * Package: Safety Package 2 * Package: Seat 36 * Package: Technology Package 19 * Upholstery: Fabric * Pre-Collision Assist * Wheel Package 9: LM 7.5J x 17, 255/70 R17 * Wheel arch trim * Tire pressure monitoring system * Windshield wipers with rain sensor * Mud flaps, rear * Side sill protection * Selective drive mode switch * Power steering * Start-Stop system * Socket: 12-volt connection in the rear * Rear bumper, painted in vehicle color * Front bumper, painted in vehicle color * Tachograph, digital - preparation * Daytime running lights * Door handles, painted in vehicle color * Traffic sign recognition system * Tie-down eyes, external * Tie-down eyes, internal * Immobilizer * Central locking with remote control ... and more ---- First owner. German version. Errors and prior sale excepted. 2 years factory warranty from registration (can be extended upon request). We will gladly take your vehicle in trade. Financing/leasing also possible without down payment! Do you have any further questions? We would be happy to advise you! Since a deviation of the vehi

Condition: used, maximum load weight: 6,100 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 04/2025, next inspection (TÜV): 04/2027, loading space volume: 25 m³, total length: 8,820 mm, total width: 2,550 mm, total height: 3,340 mm, Year of construction: 2025, Equipment: ABS, SPECIFIC 3-axle HardoX tipper semi-trailer Halfpipe 25 cbm First registration 04/2025 Mileage only 39,252 km Permissible total weight 39,000 kg Unladen weight 6,100 kg Overall height / loading height only 3,340 mm Volume 25 cbm Fifth wheel height 1,200 to 1,250 mm Tipping cylinder, high-pressure design, 250 bar Trough floor made of HardoX steel HB 500 TuF, 4 mm thick Rear tailgate made of HardoX steel HB 500, 3 mm thick Externally mounted, angled, pivoting rear tailgate, hydraulically operated, controlled via wireless remote control Side walls made of HB450 HardoX steel, 4 mm thick Electric sliding cover CRAMARO with wireless remote control 2x LED reversing lights Credpsz Iu Uaefx Ailoh SAF axles, reinforced "Off-Road" design 1st axle: lift axle WABCO trailer EBS with RSS stability program WABCO Smartboard with axle load display Tires: 6 x 385/65 R 22.5 ALCOA aluminum rims, Dura-Bright, high-gloss finish Retarder (switchable) Automatic tipping and lowering RENTING is the new BUYING; with us, it is also available as a full-service rental.

Condition: used, mileage: 6,050 km, power: 130 kW (176.75 HP), first registration: 09/2022, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: automatic, emission class: euro6, number of seats: 3, total length: 6,204 mm, total width: 2,098 mm, total height: 2,312 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, tail-lift, Internal vehicle number: 3885 ----Why autonext? Over 400 cars and commercial vehicles available immediately. One of the largest vehicle showrooms in the region. Over 1,000 satisfied customers annually - top customer ratings. Attractive financing and trade-in options available. Complete vehicle range available at autonext - Mobility made easy. WhatsApp Chat: ### Offer: Financing from 4.99 % ### ----Top condition! 1st owner, German vehicle, non-smoker vehicle Complete service history, exclusively maintained at Mercedes-Benz New brakes front and rear Automatic transmission Number of seats: 3 Hydraulic loading platform "Palfinger" (750 kg) Climatic air conditioning system Heated seats ErgoComfort suspension seat Suspension: Reinforced damping and stabilizers, front and rear Acoustic reversing warning (external warning signal) Upon request, we can offer an optional reversing camera retrofit. ---- Special features: * Storage package 2 * Storage compartments: 2 DIN compartment in the front under the headliner * Interior lighting in the driver's cab: Reading light in the front * Audio system Composition Colour (radio / SD card interface / USB) * Multimedia interface 2 x USB (Type C) in the front * Mobile phone interface Bluetooth * Mobile online services App-Connect * Lockable glove compartment * 2nd battery with battery monitoring * Airbag driver / passenger side, passenger airbag can be deactivated * Exterior mirrors electrically adjustable and heated * Diesel particulate filter regeneration manually * Suspension: Reinforced damping and stabilizers, front and rear * Heated windshield * Floor mats driver's cab: Rubber * Climatic air conditioning system (driver's cab) * Emergency call system * Position lights (roof) * Digital radio reception (DAB+) * Reversing camera preparation * Acoustic reversing warning (external warning signal) * Seats in the driver's cab: Passenger double seat with storage compartment Csdpfxsz I Htnj Ailorh * Seats in the driver's cab: Driver and passenger seat heated * Seats in the driver's cab: ErgoComfort suspension seat, driver's side (seat adjustment 20-way) * Preparation for 3rd brake light * Seatbelt warning system (driver / passenger side) Standard equipment: Anti-lock braking system (ABS), Drive type: Front-wheel drive, Exterior mirror convex, left, Exterior mirror convex, right, Turn signals LED integrated into exterior mirror, Floor covering in driver's cab: Rubber, On-board tools, Double headlights, Electronic stability program (ESP), Driving assistance system: Hill start assistant, Driving assistance system: Brake assistant (HBA), Power windows front, Remote control (2) foldable, Transmission automatic - (8-speed), Grab handles A-pillars, Interior lighting in driver's cab: LED, Body / structure: Standard flatbed, Fuel tank: 75 liters, Radiator grille with chrome strip at the top, Steering column (steering wheel) adjustable, Headlight range adjustment, Truck registration, Marker lights on the side, Engine 2.0 liters - 130 kW TDI, Multifunction display Plus, Rear fog light, Wheelbase 3640 mm, Tire repair kit, Diesel particulate filter, Low emission according to emission standard Euro 6d, SCR system (AdBlue technology), Power steering electro-mechanical, Seat cover / upholstery: Fabric, Start / stop system engine, Bumper front in gray, Daytime running lights, Immobilizer (electronic), Heat-insulating glazing, Central locking with remote control and interior operation, Permissible total weight 3.50 t. ----MOT/technical inspection ca

Condition: used, mileage: 301,000 km, power: 130 kW (176.75 HP), first registration: 02/2002, fuel type: diesel, overall weight: 12,000 kg, axle configuration: 2 axles, brakes: retarder, color: grey, gearing type: mechanical, emission class: euro6, Equipment: ABS, air conditioning, compressor, navigation system, parking heater, MB ATEGO 1218 Horse Truck, 5 Horses Capacity for 5 horses, side and rear ramp, storage compartments around the truck, fresh water, sleeping berths, living room, shower. Video surveillance for the horse compartment, auxiliary heater, leather seating, microwave, refrigerator, external saddle room, winch, cruise control, alloy wheels, air suspension, trailer hitch, and more. Crodpfjzlwypsx Ailjh Errors/input errors and prior sale reserved. * NET PRICE POSSIBLE. * Top leasing offers. Location and viewing of our vehicles: STX HORSETRUCKS GERMANY Hamburgerstrasse 65 23816 Leezen Sales and service of all brands in the field of horse transporters and trailers. Please arrange an appointment in advance. Contact: Richard Theurer, Andreas Theurer.

Condition: used, Year of construction: 2001, Baffle width: 4000 mm. Baffle height: 1000 mm. External dimensions: 4600 x 1500 mm. 2 x 1.5 kW motors. Total nominal flow rate: 7000 m³/h. Right and left exhaust nozzles with 300 mm diameter. Crjdsvvizkspfx Aileh Storage location: Garbsen

Condition: ready for operation (used), Year of construction: 2018, operating hours: 17,822 h, travel distance X-axis: 700 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 300 mm, table load: 250 kg, spindle speed (max.): 16,000 rpm, spindle motor power: 4,900 W, number of axes: 4, This 4-axis Brother Speedio S700 X1 was manufactured in 2018. It features an X-axis travel of 700 mm, Y-axis travel of 400 mm, and Z-axis travel of 300 mm. The machine includes a table size of 1150 x 400 mm and a maximum table load capacity of 250 kg. If you are looking to get high-quality machining capabilities, consider the Brother Speedio S700 X1 vertical machining centre we have for sale. Contact us for further details. • Table size: 1150 x 400 mm • Spindle taper: 7/24 No. 30 (Big-Plus) Dual Contact / BT30 • Tool shank: MAS-BT / BBT30 • Retention knob: MAS-P30T-2 (30°) • Tool changer: 21-tool carousel, total load capacity 35 kg • Tool change time (tool-to-tool): 0.8 s • Tool balance limit: 50 g • Rapid traverse rates: X 50 m/min, Y 50 m/min, Z 56 m/min • CNC control: CNC-C00 • Machine control indicated readings (recorded : Total operation time 17,822 h; Power-on time 33,212 h • Excluded equipment: External hydraulic unit Additional equipment • Hydraulic fixing table • Renishaw broken tool detector Cjdoz Hmn Njpfx Ailerh • Transformer / power supply unit • HAKUSAN chip conveyor • Emulsion mist separator SARA UC 1 SD

Condition: like new (used), Year of construction: 2003, Retrofitted: 2026 Cjdpfx Aijy Nfz Ejlerh Numerical control: HEIDENHAIN TNC-530 Technical features Dimensions Table dimensions: 20000 x 2500 mmNumber of T slots: 10T slots dimensions: 22 mm Traverses of axis X axis traverse: 20000 mmY axis traverse: 3800 mmZ axis traverse: 1250 mmVertical capacity: 100 / 1350 mmDistance between columns: 3200 mm Milling head Head type: Auto-indexing BC universal UAD milling head (0,1º)Tool clamping system: HydraulicTaper nose: ISO 50 (DIN 69871)   /   Pull stud: DIN 69872Speed range: 6000 rpmSpindle power: 27 kW Feedrates Rapid feedrates (X / Y,Z): 15000 / 12000 mm/min Weight and dimensions Maximum weight on table: 15000 kgMachine weight approximate: 150000 kgMachine dimensions approximate: 30190 x 8865 x 6200 mm Accessories Guarding: Door with platform access and new perimetral wire-mesh fenceAutomatic tool changer:ATC-120Chip conveyor:2 longitudinal hinge typeControl panel: 2 switched panels on each side of the tableElectronic handwheel: HR-510Coolant: External and internal high pressure through spindle Sale conditions Warranty: 6 months mechanical partsPrice and sale conditions: On request View all technical features

Condition: excellent (used), Year of construction: 2017, No. 1 rectangular filter station with a mechanical shaker cleaning system, operating under positive pressure, with the following dimensions: Width: 3,400 mm Length: 6,600 mm Height: 7,500 mm Filtering surface: 396 m2 Manufactured from galvanized steel sheet, complete with: - No. 160 polyester satin filter bags, 350 g/m², Ø250 × 3,000 mm, open at both ends; Crsdez Hz Htjpfx Ailsh - No. 320 galvanized quick-release clamps, Ø250 mm; - No. 2 filter support frames; - No. 1 electric motor, 2.2 kW – 6 pole; - No. 1 external filter housing enclosure; - No. 1 access door to the filter compartment; - No. 1 vertical access ladder to the filter compartment; - No. 2 clean-air discharge stacks complete with air sampling connections; - No. 6 braced support legs; - No. 1 dust collection hopper complete with inspection hatch; - No. 1 screw conveyor, complete with 2.2 kW – 4-pole gear motor, steel shaft and flight, bearings, and supports; - No. 1 rotary airlock valve, complete with 1.5 kW – 4-pole gear motor, steel shaft, and rubber blades; - No. 1 high-level indicator; - No. 2 transparent PVC inspection windows; - No. 1 Ø200 mm tee connection complete with anti-clogging micron vent; - New galvanized bolts, nuts, and sealing gaskets for future reassembly.

Condition: ready for operation (used), Year of construction: 2013, operating hours: 28,500 h, functionality: fully functional, load capacity: 235 kg, arm reach: 2,550 mm, load center: 300 mm, torque: 1,324 Nm, positioning accuracy: 0.07 mm, LOT scope: 3x welding robots for external connection 2x handling robots 5x control cabinets 5x main power cable for robot cabinet 5x communication cable for robot cabinet 5x panel with supply line to the cabinet Codpfx Aoz D H Dreilsrh Operating hours: between 28,500 and 39,000 hours Manufacturer: ABB Model: IRB 6640-235/2.55 Type: IRB 6640 M2004 Reach: 2.55 m Handling capacity: 235 kg Center of gravity of payload: 300 mm Wrist torque: 1324 Nm Positional repeatability: 0.07 mm Path repeatability: 0.7 mm 3x 400V AC 50-60 Hz 20 A Accessories: Control cabinet: Type: IRC5 M2004 Operating panel: FlexPendant Model: DSQC 679 Cable set: Main connection cabinet to robot Leoni add-on: Cable set for handling or welding

Condition: used, first registration: 04/2014, total width: 2,550 mm, Key Features Internal Reference: 25182N Chassis Number: 3974 641 Csdoz Hpzfepfx Ailsrh Vehicle Model: Thermosilo SWS / Swiss-Vehicle Vehicle Make: Graber Product Category: Insulated Tipper Condition: Used Date of First Registration: 04/15/2014 Overall Vehicle Condition: 6 Weights & Dimensions Vehicle Width: 2550 mm Body Body Manufacturer: Graber Body Model: Thermosilo Body Year of Manufacture: 2014

Condition: new, functionality: fully functional, Year of construction: 2026, Villex Plus Giant Block-Line Black 1.0 – The impressive 10 x 3 meter XXL office container with a panoramic glass front! Are you looking for a representative, extremely spacious, and modern open-plan solution? The Villex Plus Giant Block-Line Black 1.0 from Villex Container GmbH sets new standards in design and spatial experience. With its impressive dimensions of 10.0 m in length and 3.0 m in width, it offers approximately 30 m² of usable space in the exclusive BLOCK-LINE design. The elegant color scheme in anthracite (RAL 7016), the double-glazed glass door, and no less than five floor-to-ceiling panoramic windows (each 1,000 x 2,000 mm) create an incomparably bright, stylish, and light-filled room atmosphere. Perfect as an open-plan office, showroom, salesroom, practice, or representative reception area. Inspection and collection are possible at any time by arrangement. Csdpfx Aiez Ia Tbjlsrh 🔹 HIGHLIGHTS & DATA AT A GLANCE Model: Villex Plus Giant Block-Line Black 1.0 Manufacturer: Villex Container GmbH Condition: New & ready for immediate use External dimensions: 10.00 m x 3.00 m x 2.60 m (L x W x H) Usable area: approx. 30.0 m² (generously sized and flexibly divisible) Weight: approx. 2,200 kg (solid & extremely stable) Color concept: Completely in modern anthracite (RAL 7016) with an elegant BLOCK-LINE look Construction: Robust steel construction – durable, safe & stable Insulation: 50 mm thick insulation for a pleasant indoor climate in all seasons 🔹 PANORAMIC FEATURES & ELECTRICAL EQUIPMENT Entrance: Double-glazed glass entrance door for a high-quality appearance Window front: 5x floor-to-ceiling windows (each 1,000 x 2,000 mm) for maximum light penetration Electrical equipment (complete package): External connection: 32A CEE plug, red (power supply) 3x double sockets for workstations & hardware 2x LED lights for perfect illumination 1x light switch & fuse 🛠 CUSTOM FABRICATION & SPECIAL REQUESTS POSSIBLE Do you need partition walls, sanitary facilities, an air conditioning system, or additional electrical connections? We will adapt the container precisely to your requirements! 🚚 DELIVERY & PAYMENT Delivery: Fast, nationwide delivery with our own special vehicles / crane truck Delivery time: In-stock standard models: approx. 1–2 weeks Individual special production: approx. 4–6 weeks Payment options: PayPal Bank transfer (prepayment) 📞 REQUEST A NON-BINDING QUOTE NOW! Get free advice! Write to us directly via classified ads or call us – we will create your individual offer. (Search terms / Keywords: Villex Plus Giant Block-Line Black 1.0, office container 10x3m, XXL container 30m2, modular office, Block-Line container, floor-to-ceiling windows, panoramic container, open-plan office, showroom container, anthracite RAL 7016, modular construction, commercial container, practice container)

Condition: good (used), Year of construction: 2009, CN Heidenhain TNC 530 Travel X – 3000 mm Travel Y – 2000 mm Travel Z – 1200 mm Travel W – 730 mm Codjz H Ui Uepfx Ailsrh CNC table 1600 x 1800 mm Max. workpiece weight – 15 t External coolant system, 4 nozzles Heidenhain rotary table with B-axis Heidenhain linear scale, X-axis – 3000 mm Heidenhain linear scale, Y-axis – 2000 mm Heidenhain linear scale, Z-axis – 1200 mm Spindle support 250 mm Safety guard

Condition: ready for operation (used), Year of construction: 1989, total width: 4,000 mm, overall weight: 5,000 kg, workpiece diameter (max.): 140 mm, product length (max.): 2,000 mm, number of axes: 2, This Schaudt Mikrosa SASL 125 was manufactured in 1989. A centerless external grinding machine, it features NC-controlled operations and hydrodynamic axis bearing. Both wheels can be dressed via a controlled axis. Refurbished by UHLMAN Werkzeugmaschinen-Service in 2021/22, it has been regularly maintained. Consider the opportunity to buy this Schaudt Mikrosa SASL 125 centerless grinding machine. Contact us for more information. Retroffited & Overhauled in 2021/22 Working range: • Maximum workpiece diameter • that can be ground • with a grinding wheel Ø 500 mm: 140 mm • Maximum workpiece diameter • that can be ground • with a grinding wheel Ø 630 mm: 80 mm • Minimum workpiece diameter that can be ground: 3.5 mm • Maximum workpiece length for through-feed grinding: 200 mm • Maximum workpiece length in plunge grinding 245 mm • Maximum grindable profile depth on the workpiece 25 mm Grinding wheel: • Maximum outer diameter 500 or 630 mm • Minimum outer diameter 380 mm • Maximum grinding wheel width 250 mm Cedpfxjx Enapo Ailorh • Grinding wheel bore 305 mm • Guide wheel: • Maximum guide wheel outer diameter 315 mm • Maximum guide wheel width 250 mm • Bore diameter 127 mm Power requirements: • Power consumption approx. 33 kW Additional equipment • Optional: Additional equipment available Machine Benefits Technical Machine Benefits • Hydrodynamic axis bearing • Regular maintenance during series production

Condition: excellent (used), Year of construction: 2009, total length: 3,900 mm, total width: 1,450 mm, total height: 1,500 mm, overall weight: 1,500 kg, type of input current: three-phase, input voltage: 400 V, working width: 600 mm, Equipment: type plate available, For Sale: 2x Tromp Make-up, Rolling and Cutting Unit Machines These machines can be integrated into a laminating line, for example in a Tromp, Rademaker, or Fritsch line, etc. Inspection on location is possible. Specifications: - Length x Width x Height (each): 3900 mm x 1450 mm x 1500 mm - Conveyor belt Cedpfjx Eb Abex Ailsrh - Module for dough rolling (for baguettes, etc.) - The module can be lifted if no rolled products are needed - Flour duster - Cutting unit for smaller rolled products - Moulder for dividing into 4 dough pieces - Mechanically adjustable height - Almost as new, well maintained - Delivered complete - Belt width: 650 mm - Working width: 600 mm - Output width / exit working width: 1x 800 mm and 1x 900 mm Price per unit: €50,000 Transport upon agreement If you have any questions or comments, please let us know. Best regards, Leo Holland

Condition: new, functionality: fully functional, power: 125 kW (169.95 HP), gearing type: automatic, fuel type: hybrid, color: other, Year of construction: 2026, Equipment: cabin, hydraulics, CONSTMACH MOBILE 100 is a fully automatic mobile concrete plant that stands out for its high production capacity. Its integrated structure on a wheeled chassis allows it to carry all equipment, including the cement silo. This provides users with significant advantages such as easy transportation, quick setup, and minimal infrastructure requirements. Only a flat ground is required for site preparation, thus eliminating the need for additional infrastructure investment. The plant, which has a 33-ton integrated cement silo, can also be supported by external silos ranging from 50 to 500 tons, depending on requirements. The twin-shaft mixer used in the MOBILE 100 model has a wet concrete production capacity of 2 m³ and ensures a highly homogeneous mix. In addition, the mobile aggregate pre-feeding conveyors eliminate the need for a ramp, saving time and money on the job site. The system has an advanced automation infrastructure equipped with SIEMENS and SCHNEIDER brand electronic components. The production process is easily managed with user-friendly PLC-based control software. MOBILE 100 can be transported quickly and safely between construction sites thanks to its dimensions, which comply with international transportation standards. Mobile 100 - Mobile Concrete Plant Technical Specifications Production Capacity: 100 m³/hour Transport Dimensions: 17 (L) x 2.8 (W) x 4.3 (H) m Weight: 30 tons Total Motor Power: 125 kW Required Generator: 200 kVA Mixer Type: Twin-Shaft Mixer Working Area: 300 m² Aggregate Storage Bunker: 4 x 12 m³ Aggregate Weighing Bunker: 3 m³ Transfer Belt: 1,000 x 13,000 mm Mixer Concrete Volume: 2 m³ Cement Weighing Bunker: 1,200 kg Water Weighing Bunker: 800 liters Additive Weighing Bunker: 30 liters Air Compressor: 500 liters, 5.5 kW Cement Silo: Internal 26 tons / External 50–500 tons Control Type: Fully Automatic Why Should You Choose CONSTMACH MOBIL 100 Mobile Concrete Batching Plant? CONSTMACH MOBIL 100 offers high efficiency, quick installation, and long-lasting use in a single structure. Manufactured with a quality engineering approach, this plant is equipped with automation systems that meet international standards and provides maximum performance in all climates and working conditions. It shortens the investment payback period with its energy savings, easy maintenance, and low operating costs. Spare parts and technical support services offered with the CONSTMACH guarantee ensure the uninterrupted operation of your plant. If you are looking for a reliable, high-capacity, and portable solution, MOBILE 100 is the right choice for you. Credjxpgukepfx Ailoh What Do We Do at Constmach? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: new, functionality: fully functional, power: 47 kW (63.90 HP), color: other, Year of construction: 2026, Equipment: cabin, CONSTMACH MOBICOM 30 Mobile Concrete Plant is a concrete production facility designed specifically for projects seeking high mobility and low operating costs, standing out with its compact design. This system, manufactured to fit into a single 40 ft container, requires minimal setup on-site and eliminates the need for a mobile crane during assembly. The MOBICOM 30 can be easily transported between construction sites by truck and continues to operate in the same position during production. The mixer is positioned close to ground level, allowing the produced concrete to be conveniently transferred to the transmixer via a conveyor belt. This compact plant carries all concrete production components except the cement silo. If cement is supplied in bags, production can be easily carried out using the blasting bunker and cement transfer system on the chassis. If desired, MOBICOM 30 can also be used with an external cement silo. It can be equipped with single-shaft, pan, or planetary mixer options according to production needs. The optimized aggregate bunker's low feed height allows the loader bucket to fill the aggregate directly from ground level. SIEMENS and SCHNEIDER branded electronic components, high-quality PLC, and user-friendly automation system make it easy to control all plant operations. MOBICOM 30 - Mobile Concrete Mixing Plant Technical Specifications Production Capacity: 30 m³/hour Transport Dimensions: 8 (L) x 2.3 (W) x 2.5 (H) meters Weight: 8.5 tons Total Motor Power: 47 kW Required Electric Generator: 70 kVA Mixer Options: Pan – Single Shaft – Planetary Aggregate Storage Bunker: 4 x 6 m³ Aggregate Weighing Bunker: 0.75 m³ Aggregate Transfer Belt: 800 x 15,250 mm Mixer Wet Concrete Volume: 0.5 m³ Cement Weighing Bunker: 300 kg Water Weighing Bunker: 200 liters Additive Weighing Bin: 20 liters Air Compressor: 300 liters, 4 kW Cement Silo Capacity: 50 – 200 tons Control Type: Fully Automatic Working Area Requirement: 200 m² Cedpjxpg Abjfx Ailjrh Why Choose MOBICOM 30 | Mobile Concrete Batching Plant? Developed by CONSTMACH, MOBICOM 30 is one of the most efficient solutions in its class in terms of both mobility and performance. Its compact design, which can be transported in a single container, low installation time, and high production capacity provide significant savings in time and cost. The automation system, supported by SIEMENS and SCHNEIDER components, guarantees long-lasting and uninterrupted operation. Manufactured with the CONSTMACH guarantee, MOBICOM 30 is an ideal investment for construction projects of all sizes thanks to its durability, easy transportability, and flexibility of use. What Do We Do at Constmach? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products tailored to their needs. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: new, functionality: fully functional, power: 47 kW (63.90 HP), fuel type: hybrid, color: other, Year of construction: 2026, Equipment: cabin, hydraulics, onboard computer, CONSTMACH MOBICOM 30 Mobile Concrete Plant is a concrete production facility designed specifically for projects seeking high mobility and low operating costs, standing out with its compact design. This system, manufactured to fit into a single 40 ft container, requires minimal setup on-site and eliminates the need for a mobile crane during assembly. The MOBICOM 30 can be easily transported between construction sites by truck and continues to operate in the same position during production. The mixer is positioned close to ground level, allowing the produced concrete to be conveniently transferred to the transmixer via a conveyor belt. This compact plant carries all concrete production components except the cement silo. If cement is supplied in bags, production can be easily carried out using the blasting bunker and cement transfer system on the chassis. If desired, MOBICOM 30 can also be used with an external cement silo. It can be equipped with single-shaft, pan, or planetary mixer options according to production needs. The optimized aggregate bunker's low feed height allows the loader bucket to fill the aggregate directly from ground level. SIEMENS and SCHNEIDER branded electronic components, high-quality PLC, and user-friendly automation system make it easy to control all plant operations. MOBICOM 30 - Mobile Concrete Mixing Plant Technical Specifications Production Capacity: 30 m³/hour Transport Dimensions: 8 (L) x 2.3 (W) x 2.5 (H) meters Weight: 8.5 tons Total Motor Power: 47 kW Required Electric Generator: 70 kVA Mixer Options: Pan – Single Shaft – Planetary Aggregate Storage Bunker: 4 x 6 m³ Aggregate Weighing Bunker: 0.75 m³ Aggregate Transfer Belt: 800 x 15,250 mm Mixer Wet Concrete Volume: 0.5 m³ Cement Weighing Bunker: 300 kg Water Weighing Bunker: 200 liters Crodpjxqaa Ajfx Ailoh Additive Weighing Bin: 20 liters Air Compressor: 300 liters, 4 kW Cement Silo Capacity: 50 – 200 tons Control Type: Fully Automatic Working Area Requirement: 200 m² Why Choose MOBICOM 30 | Mobile Concrete Batching Plant? Developed by CONSTMACH, MOBICOM 30 is one of the most efficient solutions in its class in terms of both mobility and performance. Its compact design, which can be transported in a single container, low installation time, and high production capacity provide significant savings in time and cost. The automation system, supported by SIEMENS and SCHNEIDER components, guarantees long-lasting and uninterrupted operation. Manufactured with the CONSTMACH guarantee, MOBICOM 30 is an ideal investment for construction projects of all sizes thanks to its durability, easy transportability, and flexibility of use. What Do We Do at Constmach? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products tailored to their needs. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 88462-85, travel distance X-axis: 760 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 300 mm, spindle speed (max.): 42,000 rpm, controller model: RÖDERS RMS 6 Version 4.20, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item on time between November 16, 2026, and November 26, 2026! Crsdpfx Aisz Iludoloh TECHNICAL DETAILS Control system: RÖDERS RMS 6 Version 4.20 Travel range, X-axis: 760 mm Travel range, Y-axis: 550 mm Travel range, Z-axis: 300 mm Table dimensions: 860 x 550 mm Max. workpiece weight: 800 kg Feed rate: 0 to 30,000 mm/min Positioning accuracy: 0.005 mm Spindle speed: 42,000 RPM MACHINE DETAILS Control system: RÖDERS RMS 6 Version 4.20 Dimensions & Weight Dimensions (L x W x H): 5,000 x 3,000 x 2,700 mm Weight: 7,000 kg EQUIPMENT 2 EROWA clamping systems Additional suitable accessories Cooling system Extraction system Work bench with fixtures 3D measuring probe External reference: Alesco - Lot 62

Condition: used, Year of construction: 1988, machine/vehicle number: 13.088.094, travel distance X-axis: 420 mm, travel distance Y-axis: 240 mm, travel distance Z-axis: 120 mm, spindle speed (max.): 9,000 rpm, controller model: HEIDENHAIN TNC 155, drilling depth: 120 mm, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item on time between November 16, 2026, and November 26, 2026! TECHNICAL DETAILS Travel range, X-axis: 420 mm Travel range, Y-axis: 240 mm Travel range, Z-axis: 120 mm Travel range, A-axis: ± 30,000 ° Table clamping surface: 780 × 230 mm Drill head adjustment range: 450 mm Spindle speed: 50–9,000 rpm Spindle motor drive power: 3.7 kW Drilling capacity in steel: 20 mm Drilling depth: up to 120 mm Rapid traverse, X-axis: 7 m/min Feed rate, X-axis: 7,000 mm/min Rapid traverse, Y-axis: 7 m/min Feed rate, Y-axis: 1–7,000 mm/min Feed rate, Z-axis: 0.02–0.30 mm/rev Rapid traverse, A-axis: 10,800 °/min Feed rate, A-axis: 1–10,800 °/min MACHINE DETAILS Control system: HEIDENHAIN TNC 155 Operating voltage: 380 V Frequency: 50 Hz Dimensions & Weight Dimensions (L x W x H): 2,200 x 2,000 x 2,400 mm Weight: 2,000 kg EQUIPMENT Built-in workshop drawer cabinet Hand tools Milling cutters Matching tool holders Collets Crsdpfxez Ilu Ro Ailsh External Reference: C.O. - Lot 23