Used Siegert Psi for sale (269)

Condition: excellent (used), Year of construction: 2004, This Pilot Plat has an ice condenser capacity of 100 litres and is designed to freeze-dry solids or liquids in ampoules, small bottles etc. Technical Data: Lsdpfjw Snufjx Aftsad Ice Condenser capacity: 12 kg Ice Condenser output: 8 g / 24 h Ice Condenser temperature: - 75° C Manufacturer: Christ Year of construction: 2004 Floor Space: 130 x 130 x 200 cm + 180 x 60 x 200 cm

Condition: used, machine/vehicle number: 151, empty load weight: 6,615 kg, maximum load weight: 27,385 kg, overall weight: 34,000 kg, axle configuration: 3 axles, first registration: 10/2004, loading space volume: 53 m³, suspension: air, tire size: 385/65 r 22,5, color: white, Equipment: ABS, * Disc brake * EBS (Electronic Braking System) * Wheelbase 1,330 mm * Aluminum frame * Lifting and lowering mechanism * Hydraulic rear support * BPW axles * Alcoa aluminum rims Lodjlpal Dopfx Aftoad Next internal inspection: 09/2025 Errors and omissions excepted.

Condition: used, mileage: 500 km, power: 375 kW (509.86 HP), axle configuration: 6x4, color: green, driver cabin: sleeper cab, gearing type: automatic, suspension: air, Year of construction: 2026, Equipment: ABS, EBS, air conditioning, - Brake system Lsdpoyfrqqefx Aftoad Mercedes-Benz Arocs 2651 L 6x4 Short Timber Transporter Loading crane: Palfinger Epsilon TZ 12-98, EBERT short timber body, approx. 6,750 mm between bulkhead and crane, A1D front axle 8.0 t, A1Y front axle, straight execution, A2F rear axle, crown wheel 233, planetary, 13.4 t, A5P axle ratio i = 3.714, B1B electronic braking system with ABS and ASR, B2A disc brakes on front and rear axles, B2D disc brakes with partial protection, B2X parking brake, electronic, B2Z parking brake additionally on front axle, B3K secondary oil retarder, B4A condensation monitoring for compressed air system, B4M compressed air tank, steel, B5A trailer brake, 2-line, brake connections left, C2R wheelbase 4800 mm, C4L rear overhang 2550 mm, C6Q stabilizer, front axle, D0S compressed air connection in cab, D1C driver's air suspension comfort seat, D1N passenger function seat, D2N seat backrest release, driver's seat, D2Y seat belt check, D3B comfort bed, lower, D3Q seat upholstery velour, D4T curtain across bed(s), D4Y sun blind, side, driver’s side, D5Y rubber mats, driver and passenger side, D6F air conditioning, D6I residual heat utilization, D6M hot water auxiliary heater, cab, D7A additional thermal insulation, D7G storage compartment covers, driver and passenger side, D7J drawers under bed, D7K drawer under balustrade, D7R storage lids above windscreen, D7Y luggage shelf, upper, at rear wall, D8N electric roof hatch, D8X low seat box, 40 mm lowered, E0D battery sensor, Hella make, E0F Exide batteries, E1C batteries 2 x 12 V/220 Ah, low maintenance, E1M alternator 28 V/150 A, E3M socket 24 V/15 A behind seat, E3R power socket 24 V/25 A, passenger footwell, E3W PSM 2nd generation, E4C additional functions for body builders, E5H night driving light switch, E5K MirrorCam switch at bed, E6A trailer socket 24 V, 15-pin, E7F cable remote control for air suspension, E9G pre-installation for electrical devices, F0F side module, N3 vehicle, F1E L-cab StreamSpace, 2.30 m, 170 mm tunnel, F5L exterior sun visor, transparent, F5Y A-pillar trim, F6D tinted windscreen with band filter, F6I heated front mirror, F6Q air horn, F6T MirrorCam, F6V MirrorCam chrome holder, lower cover cab color, F7B bumper, corners made of steel, F7D bumper, center part with towing eyes, coupling jaw, F7Y cab entry left/right, movable, F8E central locking system, F8F comfort locking, F8V light sensor, F8W rain sensor, G0K driving program economy/power, G0T Predictive Powertrain Control, G2F gearbox G 330-12/11.63-0.77, G5A single plate clutch, G5G Mercedes PowerShift 3, G5L PowerShift Advanced, I2H tubeless tires 315/80 R 22.5 RA, I2P tubeless tires 385/65 R 22.5 FA/FLS/NLA, I4I axle configuration 6x4, I5F 26.0 tonner, I6I vehicle production plant Wörth, I6X air suspension, rear axle, J1M digital tachograph, 2nd generation, Version 2, ADR, J1S tachograph manufacturer VDO, J2G digital radio, J2K speakers 2-way system, J2U navigation system, J3U requirement Fleetboard Manager App, J3V Truck Data Center 7, J3Z axle load measurement system, J6C Multimedia Cockpit, interactive, J6Y Remote Online, J6Z pre-installation Mercedes-Benz Truck App Portal, J8H omission of rear-view camera, towing vehicle end, J8Y pre-installation for Truck Data Center 7, J9A pre-installation CB radio, 12 V, DIN slot, J9D pre-installation for toll recording, J9P pre-installation and display for up to 4 cameras, K1M tank 510 l, left, 650 x 700 x 1300...

Condition: refurbished (used), Offering Wolf sorting train, Epsilon crane 23.145 overhauled in exchange. Lasdpfxjwqpgne Aftjd

Condition: used, machine/vehicle number: 230, empty load weight: 6,800 kg, maximum load weight: 27,200 kg, overall weight: 34,000 kg, axle configuration: 3 axles, first registration: 10/1988, loading space volume: 55 m³, suspension: air, tire size: 385/65 r22,5, color: white, Drum brake Wheelbase 1,310 mm aluminum frame BPW axles Rear support Errors excepted Lsdjmrtf Hspfx Aftoad

Condition: used, machine/vehicle number: 178, empty load weight: 6,110 kg, maximum load weight: 27,890 kg, overall weight: 34,000 kg, axle configuration: 3 axles, first registration: 06/2005, loading space volume: 53 m³, suspension: air, tire size: 385/65 r 22,5, color: white, Equipment: ABS, Disc brake Laedpfx Afonk U Idstjd EBS Wheelbase 1,310 mm aluminum frame BPW axles Alcoa aluminum rims Lifting and lowering device Next external inspection 07/2024 Next internal inspection 11/2025 Errors excepted

Condition: used, Technical data: Lajdpfx Afjzhud Detod Max grinding wheel diameter: 180 mm Indexing device for sharpening milling cutters Indexing device for sharpening circular saw blades Angle sharpening capability Manual feed Motor power: 0.5 kW Overall dimensions: Length: 850 mm Width: 800 mm Height: 1550 mm

Condition: new, power: 125.03 kW (169.99 HP), fuel type: diesel, overall weight: 3,500 kg, axle configuration: 4x2, wheelbase: 4,215 mm, color: white, emission class: euro6, number of seats: 3, loading space volume: 21 m³, loading space length: 4,400 mm, loading space width: 2,110 mm, loading space height: 2,260 mm, Year of construction: 2025, Equipment: ABS, air conditioning, airbag, car registration, central locking, cruise control, electronic stability program (ESP), onboard computer, spoiler, traction control, ALUMINIUM DROPSIDE VAN 8 EPAL Brand new, ready for registration and immediate delivery, this aluminium dropside van is specifically designed for the distribution of general goods. The New Renault Master 170.35, Red Edition, 2025 version, features a Renault 2000 cc engine delivering 170 HP, EURO VI-E compliant, and comes equipped with air conditioning, Bluetooth radio, 10-inch touch screen, cruise control, spare wheel, front-wheel drive, single rear wheel, and a ribbed aluminium box body with internal dimensions of L 440 cm x W 210 cm x H 226 cm, suitable for loading 8 EPAL pallets, with a payload of 770 kg. The body floor is marine-grade plywood with plastic-coated lining, and there is a cab-top spoiler. Also available for long-term rental. Scroll for more details on this aluminium dropside van. PRODUCT CODE: N-712B TYPE Chassis EURO EMISSION STANDARD EURO VI-E GROSS VEHICLE WEIGHT 3500 kg ENGINE 2000 CC Brand Renault Trucks INTERNAL USABLE DIMENSIONS L 440 cm x W 211 cm x H 226 cm PAYLOAD 770 kg Ljdjxd Aqkepfx Aftead POWER 170 HP RANGE Master TRANSMISSION 6-speed manual BODY TYPE Aluminium van FUEL Diesel WHEELBASE 4215 mm

Condition: ready for operation (used), Year of construction: 2019, operating hours: 4,373 h, functionality: fully functional, machine/vehicle number: 1163744, travel distance X-axis: 1,016 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 635 mm, workpiece weight (max.): 1,814 kg, spindle speed (max.): 10,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel in X-axis: 1,016 mm Travel in Y-axis: 660 mm Travel in Z-axis: 635 mm Spindle speed: 10,000 rpm Rapid traverse rate X-axis: 18,000 mm/min Rapid traverse rate Y-axis: 18,000 mm/min Rapid traverse rate Z-axis: 18,000 mm/min Feed length X-axis: 1,016 mm Feed length Y-axis: 660 mm Feed length Z-axis: 630 mm Feed rate X-axis: 12,700 mm/min Feed rate Y-axis: 12,700 mm/min Feed rate Z-axis: 12,700 mm/min Workpiece length (max.): 1,370 mm Workpiece width (max.): 610 mm Workpiece height (max.): 630 mm Workpiece weight (max.): 1,814 kg Table width: 610 mm Table height: 630 mm Table length: 1,372 mm Table load: 1,814 kg Number of tool pockets in tool magazine: 30 MACHINE DETAILS Control system manufacturer: Haas Rated power: 45 kVA Lasdpfx Aszlxnhsftod Torque: 460 Nm Spindle motor power: 44.7 kW Dimensions (L x W x H): 1,370 x 660 x 630 mm Operating hours: 6,617 h Spindle operating hours: 4,373 h EQUIPMENT Chip conveyor with 4 additional feed screws ISO 50 tool holder 30-position automatic tool changer (ATC) RTAP-3 synchronized thread cutting TSC 300 psi (21 bar) Coolant chiller Programmable coolant nozzle MIN QTY LUBE (minimum quantity lubrication) Automatic air nozzle Air cooling through the spindle Renishaw WIPS High-speed machining ACF 25-micron filter Control cabinet cooler Mist separator 4th axis pre-wired DWO/TCPC WIFI connection to the local network WIFI camera Automatic door 15 tool holders

Condition: excellent (used), Manufacturer: R+D Custom Automation Laodpfxjznvfij Aftsd Type of equipment: Semi-automatic assembly and ultrasonic welding machine Application: Production of medical bags and tubes Serial number: 19-11231 Supply voltage: 240 V AC Supply frequency: 60 Hz Number of phases: 1 Rated current (Full Load Amps): 20 A Maximum motor power (Max H.P.): N/A Compressed air requirement: 1 CFM at 90 psi SCCR (Short Circuit Current Rating): 300 kA RMS Enclosure type: NEMA 12 Drawing number: D-11030-2-02

Condition: used, Available: 2 units Used pneumatic valve manifold from Festo with five solenoid valves from the VSVA series. Manufacturer: Festo Device type: Valve manifold Valve type: VSVA-B-P53E-ZD-A2-1T1L Number of valves: 5 Operating mode: Solenoid valves Nominal voltage: 24 V DC Pressure range: 3 to 10 bar Laodpfxszmm Hno Afted Pressure range: 45 to 145 psi Connection type: Pneumatic plug-in connectors Application area: Pneumatics and automation technology Condition: Used

Condition: good (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: MINVAP VPXpert K 10c, Manufacturer: Grabner Instruments Messtechnik GmbH - Type: MINVAP VPXpert K 10c - Year of manufacture: 2017 - Technical data: > Measured temperature range: 0 to 120°C (user programmable) > Temperature stability: ±0.01°C > Temperature profiles: single temperature, stepped, or ramp mode > Pressure range: 0 to 1000 kPa (0 to 145 psi) > Pressure resolution: 0.1 kPa > Pressure tolerance: 0.1 kPa > Vapor-liquid ratio: 0.02/1 to 100/1, adjustable per selected method Lsdpfxext H Hhs Aftead > Power requirement: 90-264 V AC, 45-63 Hz, 200W (mains supply) > Field application DC/AC power converter: 12V / 200W > Dimensions (W x H x D): 253 x 368 x 277 mm (10 x 14.5 x 10.9 in) > Weight: 9 kg (20 lb) > Precision data: > Repeatability: ±0.3 kPa (0.04 psi) > Reproducibility: ±0.7 kPa (0.10 psi)

Condition: ready for operation (used), Year of construction: 2015, travel distance X-axis: 870 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 930 mm, total height: 1,178 mm, total width: 3,585 mm, table load: 800 kg, overall weight: 16,100 kg, spindle speed (max.): 20,000 rpm, spindle motor power: 22,000 W, tool weight: 10,000 g, product length (max.): 4,957 mm, number of axes: 4, This 4-axis Kitamura Mycenter HX500iG was manufactured in 2015. It features a maximum workpiece diameter of 800 mm and a maximum workpiece height of 1,100 mm. The machine includes a robust pallet size of 500 x 500 mm and a maximum table load of 800 kg. If you are looking to get high-quality machining capabilities, consider the Kitamura Mycenter HX500iG horizontal machining centre we have for sale. Contact us for further details. • CNC controller: Arumatik-Mi • Pallet size: 500 x 500 mm (19.7" x 19.7") • Number of pallets: 2 • Pallet change time: 8.8 s • Max. workpiece diameter: Ø 800 mm (Ø 31.5") • Max. workpiece height: 1,100 mm (43.3") • B-axis travel: 0–360° (full 4th axis, DD motor driven) • B-axis rapid feed: 43,200 deg/min (120 rpm) • Table surface to spindle center: 50–850 mm (2.0"–33.5") • Table center to spindle nose: 140–1,070 mm (5.5"–42.1") • Drive method: Gear drive, 4-step • Max. spindle torque: 266.4 N·m (196.5 ft-lbs) • Spindle motor: 22 kW (30 HP AC / 15 min) / 15 kW (20 HP AC / continuous) • Rapid feedrate (X/Y/Z): 60 m/min (2,362 ipm) • Cutting feedrate (X/Y/Z): 60 m/min (2,362 ipm) • Tool storage capacity: 50 tools (fixed pot, random bidirectional) • Tool holder style: CT(BT) 40 / HSK-A63 optional • Max. tool diameter: Ø 95 mm (3.7") / Ø 170 mm (6.7") with adjacent pot empty • Max. tool length: 600 mm (23.6") • Tool-to-tool change time: 1.3 s • Chip-to-chip change time: 3.8 s minimum • Linear scales: Fine-resolution optical feedback on X/Y/Z • Rotary scale: Direct high-resolution (0.02 sec) rotary encoder feedback on B-axis • Thermal displacement control: Intelligent advanced control system • Coolant tank volume: 700 liters • Power requirement: 55 kVA, 200V AC, 3-phase • Air requirement: 0.5 MPa, 410 L/min (90 psi, 14 cfm) Additional equipment Laodpfxozl S Nxs Aftjd • Through-spindle coolant: High-pressure internal coolant system at 20 bar (RCM 20 bar) • Chip conveyor: Scraping / double-decker type • Work area tool sensor: Renishaw tool presence transmitter/laser inside working area Technical Specification Taper Size BT 40

Condition: ready for operation (used), Year of construction: 2017, operating hours: 3,939 h, travel distance X-axis: 1,020 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 630 mm, controller manufacturer: FANUC, controller model: Fanuc 0i-MF / AI100, table load: 800 kg, overall weight: 6,800 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 30, tool weight: 6,000 g, number of axes: 3, This 3-axis HARTFORD MVP-11 vertical machining centre was manufactured in 2017. It features an impressive X-axis travel of 1,020 mm, Y-axis travel of 600 mm, and Z-axis travel of 630 mm. The machine includes a robust worktable measuring 1,060 × 600 mm and a maximum table load of 800 kg. If you are looking to get high-quality machining capabilities, consider the HARTFORD MVP-11 machine we have for sale. Contact us for further details. • Country of manufacture: Taiwan • Worktable: • Table size: 1,060 × 600 mm • T-slots: 5 • T-slot spacing: 100 mm • Automatic tool changer (ATC): • Tool selection: Random • Max tool diameter: 75 mm • Max tool length: 300 mm • Electrical and utilities: • Power supply: 380 V, 3-phase, 50/60 Hz • Power requirement: 28 kVA • Full-load current: 100 A • Short-circuit breaking capacity: 10 kA • Required compressed-air pressure: 6.5 kg/cm² (92 psi) • Operating data (as shown on control): • Operating time: 3,939 h 46 min 38 s • Workpiece counter: 98,086 • Displayed cycle time: 12 min 32 s Technical Specification Lsdpjzl S Ihefx Aftsad Taper Size BT 40

Condition: used, Used pneumatic valve manifold from Festo with six solenoid valves from the VSVA series. Lodpfx Afszlt E Ietead Manufacturer: Festo Device type: Valve manifold Valve type: VSVA-B-P53E-ZD-A2-1T1L Number of valves: 6 Operating type: Solenoid valves Nominal voltage: 24 V DC Pressure range: 3 to 10 bar Pressure range: 45 to 145 psi Connection type: Pneumatic plug-in connectors Application area: Pneumatics and automation technology Condition: Used

Condition: ready for operation (used), Year of construction: 2020, total height: 1,485 mm, total width: 680 mm, overall weight: 1,496 kg, product length (max.): 5,618 mm, This 5-axis CEHISA PRO 12 CONCEPT edgebander was manufactured in 2020. It accommodates edgebanding materials from 0.4 to 8 mm and has a maximum edge height of 65 mm. The machine features a feed speed of 9/14 m/min and a total electrical output of approximately 12.9 kW. If you are looking to get high-quality edgebanding capabilities, consider the CEHISA PRO 12 CONCEPT machine we have for sale. Contact us for further details. • Edgebanding material (coils): 0.4–3.0 mm (0.016"–0.12") • Edgebanding material (solid wood strips): up to 8 mm (0.31") • Maximum edge height: 65 mm (2.56") • Panel thickness (min–max): 10–60 mm (0.39"–2.36") • Minimum panel length: 120 mm (4.72") • Minimum panel width: 70 mm (2.76") Lodjzltbcepfx Aftjad • Feed speed: 9 / 14 m/min (30 / 46 ft/min) • Note: 9 m/min when corner rounding is active • Total electrical output: approx. 12.9 kW • Pneumatic supply: 6–7 bar (87–101 psi)

Condition: used, functionality: unexamined, Endress+Hauser Promag 53 Electromagnetic Flow Meter DN40 PN16 – Hastelloy C22 – Promag H Endress+Hauser Promag H 53 Electromagnetic Flow Meter High-quality Endress+Hauser Promag 53H electromagnetic flow meter, complete with a digital transmitter. Suitable for hygienic and chemical process applications requiring highly accurate flow measurement. Removed from a functioning industrial installation and in very good visual condition. Immediately available from stock in Rotterdam, The Netherlands. Manufacturer Endress+Hauser Series Promag H Model Promag 53 Order Code 53H40-1LM8/0 Sensor 53H40-UFB1AA0AAAAA Nominal Diameter DN40 (1½") Pressure Rating PN16 / 230 psi Process Temperature -20°C to +150°C Power Supply 85–260 VAC 50/60 Hz Outputs HART Current Output Frequency Output Protection IP67 / NEMA 4X Liner Material PFA Seal Material EPDM Electrode Material Lajdpfx Aezmg Sdsftod Hastelloy C22 SURPLUS – Industrial Solutions From Surplus to a Second Life

Condition: used, Year of construction: 2021, Overview This Twin Monkeys Cimarron is a compact automated canning system (monobloc can filler + seamer), built in 2021 by Twin Monkeys Beverage Systems (Denver, USA) and distributed and serviced in Europe by Agrovin. Designed for craft breweries, it fills and seams standard 0.33 L and 0.44 L beverage cans at up to 3,000 cans per hour in its current single-lane configuration. Cans run through a fully automatic cycle: air purge, filling, lid application under CO₂ and seaming. The low-oxygen filling system works with a fill tolerance of ±2 g and dissolved-oxygen pickup as low as 20 ppb; a wedge-style seamer (patent pending) closes the cans. All parameters are managed on the color touch-screen PLC, including automatic CIP wash cycles, cycle counters and operator help screens. The machine is still installed and in production and can be seen in operation. Technical data - Manufacturer: Twin Monkeys Beverage Systems (Denver, USA) - Model: Cimarron - Year of manufacture: 2021 - Machine type: automated canning monobloc (can filler + seamer) - Capacity: up to 3,000 cans/h in the current single-lane configuration - Can formats: standard 0.33 L and 0.44 L (Ø 66 mm); Slim / Sleek formats (Ø 52.8 mm) possible with optional change parts - Filling accuracy: ±2 g; dissolved oxygen as low as 20 ppb - Control: color touch-screen PLC incl. automatic CIP cycle - Compressed air (clean, dry): 90 psi / 4.5 cfm (approx. 6.2 bar / 127 L/min) - CO₂ supply: 20 psi / 1.0 cfm (approx. 1.4 bar / 28 L/min) - Materials: stainless steel AISI 304, anodized aluminium, technical plastics - Dimensions (L x W x H): approx. 2,000 x 875 x 1,860 mm - Weight: approx. 330 - 430 kg (depending on configuration) - CE marked Equipment Lodpfx Afezktv Rotsad - Fully automatic air purge, filling, lid application with CO₂ injection and seaming - Wedge-style seamer (patent pending) - Lid applicator with CO₂ curtain to minimise oxygen pickup - Product tank with automatic pressure regulation - Rejection of defective cans - Rotary accumulation table at the discharge (included, see photos) - Mobile stainless-steel frame on lockable casters - Expandable platform: additional filling heads can be retrofitted (manufacturer rating up to 6,000 cans/h with 10 heads) Condition Used - good working condition, built 2021. The machine is still installed and in regular production use at the current owner's site and can be visited and seen in operation by appointment. Availability Expected availability: April - May 2027 (the machine remains in production until then). Location: Spain.

Condition: ready for operation (used), Year of construction: 2010, working width: 1,350 mm, Belt sander manufactured in 2010. This VIET S3 333 features a working width of 1350 mm and accommodates workpiece thickness from 3 to 160 mm. It includes three sanding units with powerful 4 kW motors and a conveyor group speed of 3-16 m/min. If you are looking to get high-quality sanding capabilities, consider the VIET S3 333 belt sander we have for sale. Contact us for further details. • 1st Sanding Unit (Composition): Spinbrush • 1st Sanding Unit (Motorization): INV 4 kW • 2nd Sanding Unit (Composition): Brush • 2nd Sanding Unit (Motorization): INV 4 kW • 3rd Sanding Unit (Composition): Brush • 3rd Sanding Unit (Motorization): INV 4 kW • Conveyor Group: 3–16 m/min • Conveyor Group (Motorization): INV 3 kW • Adjustment/Rise (Motorization): MTR 0.37 kW • Vacuum Pump (Motorization): MT 4 kW • Mass: 4170 kg • Workpiece Thickness: 3–160 mm • Operating Voltage: 3 AC - 400 V • Frequency: 50 Hz • Current Draw: 48.9 A • Motor with Max Current Draw: 8 A Lasdpfx Afeyu Tfzotjd • Minimum Compressed Air Pressure: 6 - 86 bar-Psi • Maximum Compressed Air Pressure: 8 - 116 bar-Psi • Compressed Air Consumption: 1441 Nl/min • Minimum Suction Flow Speed: 25 m/s • Minimum Suction Capacity: 6190 m³/h • Noise Level (Idle): 75 dB(A) • Noise Level (Operating): 76 dB(A)

Condition: used, LDS V790-335T Vibration Test System with HPA-K CE Amplifier Manufacturer: Ling Dynamic Systems Ltd. (LDS) Type: V790-335T with HPA-K CE Amplifier Machine Type: Electro-dynamic Vibration Test System / Shaker System Cooling: Air-cooled Vibrator For sale is an industrial vibration test system from the manufacturer LDS (Ling Dynamic Systems). The system was designed for professional vibration and shock testing and is suitable for research and development, quality assurance, environmental simulation, electronics testing, as well as industrial stress and endurance tests. Technical Data Shaker Lajdpey Uigcofx Aftsd Manufacturer: Ling Dynamic Systems Ltd. (LDS) Product: Air-Cooled Vibrator Model: V790-335T Armature diameter: 335 mm Frequency range: DC to 3,000 Hz Resonant frequency: approx. 2,250 Hz Max. continuous displacement: 50.8 mm pk-pk Max. velocity: 1.5 m/s Sine force peak: approx. 6.67 kN / 1,500 lbf Random force RMS: approx. 6.67 kN / 1,500 lbf Half-sine shock force peak: approx. 26.69 kN / 6,000 lbf Effective moving mass: approx. 13.08 kg Internal load capacity: approx. 160 kg Compressed air supply required: Load support: approx. 5.52 bar / 80 psi Optional air isolation: approx. 5.52 bar / 80 psi Power Amplifier Manufacturer: Ling Dynamic Systems Ltd. (LDS) Product: HPA-K Amplifier Model: HPA-K CE Supply voltage: 50 Hz: 380 / 400 / 415 / 440 V 60 Hz: 380 / 400 / 415 / 440 / 460 / 480 / 500 V Current setting according to nameplate: 400 V Maximum connection power: 9.3 kVA Weight of amplifier: approx. 750 kg Equipment LDS V790-335T Air-Cooled Vibrator LDS HPA-K CE Power Amplifier Control and rack units PC workstation with monitor, keyboard, and mouse Cables and connection accessories as shown in the pictures Emergency stop units and safety accessories Existing documents and documentation Areas of Application Vibration testing Shock testing Environmental simulation Electronics testing Automotive industry Aerospace Research and development Quality assurance Industrial stress tests Scope of Delivery LDS V790-335T Air-Cooled Vibrator LDS HPA-K CE Power Amplifier Control and rack units as shown in the pictures PC workstation as shown in the pictures Cables and accessories as shown in the pictures Existing documents / manual Condition Used System from industrial use Optical condition as shown in the pictures Normal signs of wear and tear and storage Inspection and testing on site are possible and expressly desired after prior arrangement. Due to the size and weight, professional dismantling, loading, and transport organization are recommended. Availability: by arrangement. Scope of delivery as shown in the pictures. Changes and errors in the technical data as well as prior sale are reserved.

Condition: like new (used), Year of construction: 2016, operating hours: 100 h, functionality: fully functional, machine/vehicle number: 16P1269203, type of input current: three-phase, operating pressure: 7 bar, pump capacity: 7 l/min, power: 0.06 kW (0.08 HP), Equipment: documentation/manual, MODE OF OPERATION The system is suitable for the proportioning (metering) and mixing of two- or multi-component products. An electronic control system monitors and regulates the specified mixing ratio. The base paint flows continuously, and the control system mixes the necessary amount of hardener (in timed intervals) via a valve. The flow rate of the base paint and hardener is measured with flow meter cells. With plunger pumps, stroke sensors can also be used. The components and cleaning agents are supplied by feed pumps. Color Selection The mixing ratios, pot life, etc., are stored in recipes. The color can be changed by simply switching recipes. Further Features and Applications: For low to medium pressure (32.5 MPa; 325 bar; 4714 psi). 2K COMFORT XL for high pressure (53 MPa; 530 bar; 7687 psi). Modular design – can be configured according to customer requirements. Electronic accuracy in metering ensures consistent quality. Processing of water-based 2K materials is also possible, as all material-contacting parts are suitable for this purpose – for example, made of stainless steel. The fluid component of the Ex version is suitable for use in potentially explosive areas (Zone 1 and 2). Many displays of the functions are language-independent and use simple symbols. Text is displayed in the selected language. Consumption overview for each component and for cleaning agents, VOC documentation. Storage of the last 700 error messages with date and time. Lasdpfxozb I Spj Aftsd Safety through continuous monitoring of system parameters, informing the operator when even the smallest malfunctions occur and, if necessary, automatically interrupting production. Protection of parameters by security code. Settings can be saved on a USB stick. Electronic adjustment of the mixing ratio between 0.1:1 and 50:1. Up to 100 work recipes. (Also with robot communication or Profibus.) Possibility of two separate fluid circuits: – for simultaneous operation, – for quick color changes, – or to separate two incompatible 2K materials from each other (e.g., PUR and epoxy paints). Programmable cleaning recipes to save up to 60% of cleaning agents compared to conventional systems. Fully automatic control and monitoring for 1–4 guns. Compatibility with solvent-based and water-based products, as well as selective automatic cleaning with water and/or solvents. Use of manual or automatic atomizers. Release of automatic spray booth, automatic gun cleaning device, etc. Possibility of robot communication.

Condition: excellent (used), Year of construction: 2002, Manufacturer GN Model 3625D Year 2002 Condition Used Stock Number 00043 Maximum forming area 915 × 635 mm (36" × 25") Maximum film width 965 mm (38") Maximum forming depth 125 mm (5") Material thickness Typically 0.2–1.8 mm (material dependent) Ljdpfxsziw Rve Aftead Drive system Servo-driven platen and sheet transport Air requirements 6–8 bar (90–120 psi) Max output Up to 35–40 cycles/min

Condition: used, MANFACTURER - PRO-ECO TYPE - PRECISION DOUBLE LOOP SLITTING LINE MATERIAL - GRAIN ORIENTED, NON-GRAIN ORIENTED, SILICON STEEL, COLD ROLLED STEEL SHEAR STRESS - 100,000 PSI - SILICON STEEL | 60,000 COLD ROLLED STEEL MAX YIELD STRESS - 80,000 PSI MIN YIELD STRESS - 30,000 PSI MAX COIL WEIGHT - 50,000 LBS ENTRY/EXIT MAX COIL WIDTH - 48" NOMIMAL (50" MAXIMUM) ENTRY/EXIT MIN COIL WIDTH - 8" ENTRY / 1" EXIT MAX COIL OD - 72" ENTRY / EXIT MIN COIL OD - 36" ENTRY / EXIT MAX STRIP THICKNESS - 0.025" IN - SILICON STEEL / 0.050" CRS MIN STRIP THICKNESS - 0.010" MAX CUTS - 32 LINE SPEED - 1200 FPM ELECTRICAL - 575 V, 3 PH, 60 CYCLE AIR SUPPLY - 80 PSI LINE DIRECTION - LEFT TO RIGHT MODE OF OPERATION - FULL LOOP DRIVE-SLIT, DOUBLE LOOP LINE COMPONENTS: COIL CAR MANDREL UNCOILER PEELER TABLE ENTRY PIT GUIDE TABLES INTERMEDIATE GUIDES FELT STAND BEFORE ENTRY SHEAR ENTRY SHEAR SIDE GUIDES SLITTING HEAD BUTECH SCRAP CHOPPERS EXIT TABLE PRESSURE & TENSION ROLL STAND EXIT SHEAR RECOILER WITH OVERARM SEPARATOR EXIT COIL CAR ALSO AVAILABLE: INTEGRATED PACKAGAING LINE, INCLUDING: EXIT TURNSTILE DOWNENDER WEIGHT SCALE UNDER SEMI-AUTOMATED BANDING LINE 5/8" STEEL BANDING Ljdpfx Ajzk Nitsftoad PICK AND PLACE STACKER MAX CAPACITY 6000 LBS PER SLIT COIL ROTATING CAROUSEL EXIT CONVEYOR SEMI-AUTOMATIC STRETCH WRAPPING MACHINE WEIGHT STATION CONTROLS, HYDRAULICS AND ELECTRICS FOR LINE

Condition: ready for operation (used), Year of construction: 2023, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 250 mm, total height: 4,100 mm, total width: 5,800 mm, overall weight: 2,100 kg, product length (max.): 7,500 mm, number of axes: 3, This 3-axis CMS Smartline 2040 waterjet cutting machine was manufactured in 2023. It features an impressive X-axis stroke of 4,000 mm, Y-axis stroke of 2,000 mm, and a maximum cutting thickness of up to 220 mm. The machine includes a robust worktable size of approximately 4,150 × 2,080 mm and is equipped with a high-pressure intensifier pump. If you are looking to get high-quality cutting capabilities, consider the CMS Smartline 2040 machine we have for sale. Contact us for further details. • Max worktable size: approx. 4,150 × 2,080 mm • Cutting system • Technology: Abrasive waterjet • Cutting head: 3-axis waterjet cutting head (CMS Tecnoucut) • Max cutting thickness: up to 220 mm (material dependent) • Interpolated CNC cutting for complex shapes Lodpfxezh Itxj Aftsad • Automatic Z height control • Axes and motion • CNC controlled axes: X, Y, Z • Motors: Brushless • Guides: Recirculating ball linear guides • Drive system: Rack & pinion (X/Y), ball screw (Z) • Positioning accuracy: ±0.05 mm • Repeatability: ±0.03 mm • Waterjet pressure system • Maximum working pressure: approx. 4,150 bar (60,000 psi) • Pump power: approx. 22.5 kW • Note: High-pressure intensifier pump 30 CP included; see Additional equipment • Control and software • CNC control: OSAI Open • HMI: CMS Active interface • CAD/CAM: EasyCut / EasyPump compatible • Touchscreen control panel on mobile stand • Worktable and load • Material support: Steel grid table • Max table load: approx. 500 kg/m² • Electrical and utilities • Power supply: 400 V / 50 Hz / 3-phase • Installed power: approx. 35–40 kVA (configuration dependent) • Protection class: IP54 (control cabinet) • Safety and equipment • Safety guards and photoelectric barriers • Automatic lubrication system (X, Y, Z) • Collision detection system for cutting head • Laser pointer for zero-point setting • Electrical cabinet and control console Additional equipment • High-pressure intensifier pump (30 CP) • Abrasive feeding system (270 kg capacity) • Air compressor

Condition: ready for operation (used), Year of construction: 2022, operating hours: 1,936 h, travel distance X-axis: 3,048 mm, travel distance Y-axis: 813 mm, travel distance Z-axis: 762 mm, overall weight: 14,334 kg, spindle speed (max.): 7,500 rpm, spindle motor power: 22,400 W, number of axes: 4, This 4-axis HAAS VF-10/50 was manufactured in 2022. It features an impressive X-axis travel of 3048 mm, Y-axis travel of 813 mm, and Z-axis travel of 762 mm. The machine includes a robust table size of 3048 x 711 mm and a maximum table load of 1814 kg. If you are looking to get high-quality machining capabilities, consider the HAAS VF-10/50 vertical machining centre we have for sale. Contact us for further details. • Spindle nose to table (max): 35.0 in (889 mm) • Spindle nose to table (min): 5.0 in (127 mm) • Spindle • Max torque: 340 ft‑lbf @ 700 rpm (460 Nm @ 700 rpm) • Drive system: 2‑speed gearbox • Bearing lubrication: Air/oil injection • Cooling: Liquid cooled • Table • Length: 120.0 in (3048 mm) • Width: 28.0 in (711 mm) • T‑slot width: 0.626–0.630 in (15.90–16.00 mm) • T‑slot center distance: 4.92 in (125 mm) • Number of T‑slots: 5 • Max table load (evenly distributed): 4000 lb (1814 kg) • Feedrates • Max cutting feed: 360 ipm (9.1 m/min) • Rapids: X 360 ipm (9.1 m/min), Y 600 ipm (15.2 m/min), Z 600 ipm (15.2 m/min) • Axis motors (max thrust) • X: 3400 lbf (15,124 N) • Y: 4100 lbf (18,238 N) • Z: 5600 lbf (24,910 N) • Tool changer • Type: SMTC • Capacity: 30+1 • Max tool diameter (all pockets full): 4.0 in (102 mm) • Max tool diameter (adjacent pocket empty): 10.0 in (254 mm) • Max tool length (from gage line): 16 in (406 mm) • Max tool weight: 30 lb (13.6 kg) • Tool‑to‑tool (avg): 4.2 s • Chip‑to‑chip (avg): 6.3 s • General • Coolant capacity: 95 gal (360 L) • Air requirements • Air required: 4 scfm @ 100 psi (113 L/min @ 6.9 bar) • Inline air hose: 3/8 in • Coupler (air): 3/8 in • Minimum air pressure: 80 psi (5.5 bar) • Electrical • Drive system: 2‑speed gearbox • Input AC voltage (3‑phase) low: 220 VAC, 70 A (FLA) • Input AC voltage (3‑phase) high: 440 VAC, 35 A (FLA) • Dimensions – shipping • Domestic pallet: 288 in x 102 in x 132 in (732 cm x 260 cm x 336 cm) • Export crate: 288 in x 105 in x 134 in (732 cm x 267 cm x 339 cm) Lasdpfx Aozh Hlajftsd • Domestic pallet with EC option: 288 in x 102 in x 140 in (732 cm x 260 cm x 356 cm) • Export crate with EC option: 288 in x 105 in x 141 in (732 cm x 267 cm x 359 cm)