Used Sicar Narrow Bandsaw for sale (1,496)

Condition: new, capacity 90 degrees: round 240 mm capacity 90 degrees: square 240 mm 165 x 310 mm saw band length 2725 x 27 x 0,9 mm mm table height 890 mm band speed 35 / 70 m/min total power requirement 1,1 kW weight of the machine ca. 0,35 t Dimensions (LxWxH) 1,7 x 0,75 x 1,8 m The Z252/DG has the following equipment: - hydraulic cylinder, - emulsion pump, - eccentric clamp, - base, - saw blade, - 400V plug -16A- The machine is delivered fully assembled and ready for immediate use. Nlodohpktvspfx Alnec

Condition: new, cutting diameter 185 mm saw band length 2.085 x 20 x 0,90 mm table height 915 mm band speed 35/70 m/min capacity 90 degrees: round 185 mm capacity 90 degrees: square 150 mm capacity 90 degrees: flat 220 x 150 mm connected load frequency 400 V total power requirement 0,8 kW weight of the machine ca. 195 kg dimensions of the machine ca. 550 x 1.280 x 1.740 mm mm Metal band saw with stepless electronic speed control and automatic lowering. • Selector switch for hydraulically controlled or manual band arm lowering • Saw arm can be swiveled up to 60 ° to the right • Quick-action vice Nledpfxjhpktre Alnoc • Belt guide with 8 ball bearings • Hydraulic saw band tension with tension pressure display and band break shutdown •Incl. Coolant system •Incl. Machine cabinet

Condition: new, cutting diameter 250 mm capacity 90 degrees: flat 280 x 220 mm capacity 90 degrees: square 220 x 220 mm vice 285 mm turning speed range: 36/72 m/min dimensions of saw-band 2950x27x0,9 mm total power requirement 1,5 / 1,8 kW weight of the machine ca. 485 kg dimensions of the machine ca. 1700 x 1000 x 1800 mm Electro-hydraulic semi-automatic band saw SHARK 282 SXI EVO with semi-automatic-dynamic, manual function, has a MEP-28 control Nsdpfx Ajfg E H Sjlnjlc for miter cuts from 45° right to 60° left. Semi-automatic function: At the start of the cycle: - Vice closes and motor starts – Saw head lowers for the cut – Motor switches off – Saw head rises – Vise opens. Semi-automatic dynamic system (manual lowering of the saw band bow up to to the desired position and cycle start via the manual button.) Some features: New centralized control console on an articulated arm to allow the operator can be easily switched from any working position. Low voltage control panel: Polyester membrane keyboard with thermoformed highlighted Push buttons and actuation control signal. Display to show: * Diagnostics (messages in the user language) * Alarms (description of alarm causes) * State of inputs and outputs * Counting cuts * Time taken for the cut made * Current consumption of the saw blade motor * Saw blade tension * Blade speed * Numerical display of head position. Switch handle IP55 of manual 24V cycle. Complete program of all special cutting cycles. Identification of other possible special cutting cycles for special ones Applications New, latest generation hydraulic control unit, extremely powerful and with low energy consumption. Large work surface with turntable on roller bearings, measuring 265 mm preloaded thrust bearing, mounted. Double belt speed (36/72 m/min.) with control Intended to accommodate an electronic inverter for the Continuous regulation of the belt speed from 20 to 90 m/min. Stroke of the saw bow can be programmed directly from the control panel Adaptation to the cutting material. Clamping device can be moved laterally to the left and right Quick release vice. Manually operated strap tension control with display on the screen electronic converter. Base frame with pull-out coolant tray. Electric coolant pump for cooling and lubricating the saw band. Preparation for installing the minimum blade lubrication kit (Optional), in addition to the conventional standard lubrication Emulsion oil. Chip clearing brush. The machine is intended for pallet truck transport. Length stop for cuts of the same length Material support arm with roller for attaching the loading platform Bimetal saw band for solid and profile material. Tools and instructions for use in the respective user language.

Condition: new, cutting diameter 280 mm capacity 90 degrees: flat 380 x 260 mm capacity 90 degrees: square 260 x 260 mm turning speed range: 40 / 80 m/min dimensions of saw-band 3440 x 27 x 0,9 mm engine output 1,5 / 1,8 kW weight 670 kg Electro-hydraulic, semi-automatic band saw with additional manual and semi-automatic-dynamic function, for cuts from 45° right to 60° left. Some features: Pivoting control panel on vertical post. 420 mm large rotary table on roller bearings with preloaded thrust bearing Nlsdpefg E Iaofx Alnjc and replaceable steel inserts. Double belt speed (40/80 m/min.)

Condition: new, cutting diameter 250 mm saw band length 2950 x 27 x 0,9 mm table height ca. 800 mm band speed 36/72 m/min total power requirement 1,5/1,8 kW weight of the machine ca. 0,37 t MEP sawing machine: Saw band bow, vice unit and base made of durable cast iron Precision grade marking on the cast iron structure Electrical system (with fully identifiable electrical wiring and Low voltage system 24 V) Switch handle IP 55 for manual cycles (if available) Rotating scraper brush for the saw band Clamping unit with vice for quick approach Accurate stops with adjustment for miter cuts at 0°, 45°, 60° left Bi-metal saw band 2950 x 27 x 0.9 mm Keys, instructions for use and instructions for ordering spare parts in the User language SHARK 281 with manual operation and SHARK 281 CCS with manual operation and cutting with automatic head feed by its own weight. CCS (Cut Control System) with (A switch for manual and automatic Cutting – B) Cutting speed regulation – C) Hydraulic brake Nljdpfefg E H Iex Alnjc with tank – D) End stop for stopping the belt) also optional for already produced machines available. Vice with quick adjustment Hydraulic converter for belt tension display Electric coolant pump for cooling and lubricating the saw band and manageable coolant tray above the base frame In the versions with a pneumatic vice (MA), the opening takes place and Closing the vise with a manual valve (with pedal control as option available)

Condition: new, cutting diameter 250 mm capacity 90 degrees: flat 280 x 220 mm capacity 90 degrees: square 220 x 220 mm turning speed range: 36 / 72 m/min dimensions of saw-band 2950 x 25,4 x 0,9 mm weight of the machine ca. 0,4 t Dimensions (LxWxH) 1,5 x 0,9 x 1,5 Semi-automatic function: Nedpfx Aljfg E H Rjnjlc Vice closes and motor starts, saw head lowers for the cut, motor switches off, saw head rises, Vise opens. Some features: New centralized switch console on an articulated arm. Latest generation hydraulic control unit, highly powerful and with low energy consumption. Base frame with pull-out coolant container. The machine complies in all areas CE regulations!

Condition: new, cutting diameter 220 mm saw band length 2450 x 27 x 0,9 mm Nljdpfx Ajfgyh Nslnoc table height 915 mm band speed 35 + 70 m/min connected load frequency 400 V capacity 90 degrees: round 220 mm capacity 90 degrees: square 210 x 210 mm capacity 90 degrees: flat 230 x 185 mm total power requirement 1,2 kW weight of the machine ca. 240 kg dimensions of the machine ca. 870 x 1550 x 1740 mm The Zimmer Z241/R is a self-lowering saw for miter cuts from 0 ° - 60 ° left. After the cut, the machine stays through one Safety limit switches stand. The reduction is infinitely variable Hydraulic system adjustable. The saw arm can be raised after the cut any position. The saw arm remains at the desired position stand. The Z241 / R has the following features: Hydraulic cylinder, emulsion pump, eccentric tensioner, base, saw band, 400V Connector -16A- The machine is completely assembled and delivered ready for use.

Condition: new, Year of construction: 2026, Vertical Bandsaw with Laser Guide A simple-to-use bandsaw with a durable construction. It allows for precise adjustment of work parameters, which directly impacts cutting efficiency. The quick tensioning lever is also used for quickly removing the blade. Precise cast iron machine table. Adjustable table tilt from -10° to 45°. A window for easy reading of the blade tension. Two cutting speeds selected via a stepped pulley. Technical Data: Wheel diameter [mm]: 480 Maximum cutting height [mm]: 280 Maximum cutting width [mm]: 465 Nljdpfx Alovugwasnsc Blade width [mm]: 9.5 to 38.1 Blade length [mm]: 3605 Belt speed (2 speeds) [m/s]: 7/14 Worktable angle adjustment [°]: from -10 to +45 Worktable dimensions (L x W) [mm]: 630 x 480 Dimensions (L x W x H) [mm]: 830 x 550 x 2070 Weight [kg]: 162 Motor power [kW]: s1-2.2kW, s6-3.1kW Power supply: 3-phase, 400V Note: The price quoted is the net price. It does not include transportation costs.

Condition: new, Year of construction: 2026, The CORMAK HBS421 wood band saw is designed in a vertical configuration, allowing convenient material guidance across the table and enabling both straight and curved cuts. In production environments, rigidity is crucial—therefore, the body and main structural components ensure stable wheel alignment and, consequently, smooth and accurate blade tracking. Drive Wheels and Blade Guidance In professional band saws, cutting quality largely depends on the geometry of the blade guidance system. Properly selected drive wheels ensure correct blade operation along its entire length, reduce slippage, and limit localized overloads. In practice, this results in: Reduced vibration at higher feed rates Improved edge quality—especially in harder wood species Extended blade life thanks to stable operation and correct tension Worktable and Angle Adjustment Nlsdeyk Apnspfx Alnec The worktable provides material support and cutting repeatability. In the CORMAK HBS421 wood band saw, both stability and adjustment capability are essential, allowing for angled cuts. This solution is particularly valued in carpentry workshops where quick transitions between different operations (sizing, structural component preparation, trimming) are required. Drive System and Continuous Operation The band saw drive system is designed for load-intensive operation, while the three-phase power supply enhances smooth running and torque stability. As a result, this vertical wood band saw maintains cutting performance even when processing thicker materials—an important factor in serial production. Adjustable blade speeds allow optimization for specific tasks, reducing edge burning and improving cutting control. Dust Extraction and Workstation Ergonomics Cutting wood generates significant amounts of dust and chips. The integrated dust extraction port enables connection to an extraction system, which significantly improves: Work safety (reduced airborne dust) Visibility of the cutting line Service life of working components by limiting dust accumulation Precision and Productivity In industrial practice, it is not only the ability to cut material that matters, but also maintaining repeatability. The rigid construction, stable blade guidance, and controlled blade tension ensure straight cuts and reduce the need for corrections in subsequent processes (planing, sanding, fitting). As a result, the CORMAK vertical wood band saw supports shorter production cycles and minimizes material waste. Standard Equipment High-voltage release switch Dust extraction port 2 × 100 mm Precision rip fence Cutting blade 3345 × 20 mm, 8 TPI Optional Equipment 100 mm extraction hose Galvanized clamp Mobile base (up to 260 kg capacity) Technical Specifications Wheel diameter [mm]: 480 Maximum cutting height [mm]: 240 Maximum cutting width [mm]: 405 Blade width [mm]: 9.5 – 38.1 Blade length [mm]: 3345 Blade speed [m/s]: 7 / 14 Table tilt range [°]: 0 to +45 Table dimensions [mm]: 535 × 435 Overall dimensions [mm]: 830 × 550 × 2070 Weight [kg]: 160 Motor power: S1 – 2.2 kW / S6 – 3.1 kW Power supply: 3-phase, 400 V Manual (DTR): Yes CE Declaration: Yes

Condition: new, Year of construction: 2026, The CORMAK HBS321 vertical wood band saw operates in a vertical configuration, providing the operator with full control over guiding the material across the worktable. A key component is its rigid frame, which maintains the geometry of the wheel and guide system. This ensures smooth blade tracking and consistent cutting accuracy. In practice, this means a lower risk of blade drift—particularly important when cutting harder wood species or working at greater cutting heights. 350 mm Wheels and Blade Tracking Control Cast Iron Worktable and Angle Adjustments The band saw features a 545 × 400 mm worktable, providing adequate support for workpieces—essential for precise straight and angled cuts. The table tilt range of 0–45° allows for bevel cuts without the need for additional attachments. The cast iron construction effectively dampens vibrations, helping maintain stable operating parameters. Drive System and Operating Parameters This woodworking band saw is equipped with a motor rated at 1.1 kW (total power), ensuring stable performance for typical carpentry tasks such as ripping, trimming, preparing components for gluing and assembly, and contour cutting. The use of blades with widths ranging from 6–15 mm allows the operator to select the appropriate blade depending on the task—from precise curved cuts to stable straight-line cutting. Laser – Enhanced Control and Reduced Material Waste The integrated laser guide supports quick material alignment and accurate cut tracking. In practice, this reduces the need for test cuts, minimizes material waste, and makes working with detailed elements (e.g., profiled components or shaped cutouts) easier and more efficient. Precision and Work Efficiency In professional applications, repeatability is just as important as cutting capability. The rigid construction, stable table, and quick blade adjustment system reduce machine setup time and limit the need for corrections during subsequent processing stages (planing, sanding, fitting). As a result, the CORMAK HBS321 band saw supports smooth workflow and improves overall process efficiency. Applications The HBS321 wood band saw is designed for a wide range of woodworking and wood-based material applications, including: Cutting boards, squared timber, beams, and glued elements Trimming furniture and carpentry components Angle cutting (using the tilting table) Cutting shapes and profiled elements Workshop use in carpentry shops, craft businesses, and training facilities Technical Specifications Wheel diameter [mm]: 350 Maximum cutting height [mm]: 175 Maximum cutting width [mm]: 300 Worktable dimensions (L × W) [mm]: 500 × 400 Table tilt [°]: 0 to +45 Blade width [mm]: 6 to 15 Blade length [mm]: 2240 Blade speed [m/s]: 6 / 12 Overall dimensions (L × W × H) [mm]: 750 × 650 × 1730 Gross weight [kg]: 88 Motor power [kW]: S1 – 0.75 kW / S6 – 1.1 kW Power supply [V]: 230 Manual (DTR): Yes CE Declaration: Yes Standard Equipment On/off switch with low-voltage release Quick blade tension/release lever Nedpfjyk Alijx Alnelc Precision rip fence Cutting blade 2560 × 10 TPI 6.3

Condition: new, Year of construction: 2023, Brand new system reach truck with elevating cab, designed for loading and unloading goods, as well as for order picking in very narrow aisles. Type (group): Order picking (high stacking) Operating method (guidance): Inductive wire Nljdpfjiyprcjx Alnjc Year of manufacture: 2023 (truck in production, delivery May/June) Serial No.: 6959414 Rated load capacity: 1500 kg Load center: 600 mm Lifting height: 10,250 mm Lifting height (platform): 8,600 mm Order picking height: 10,200 mm Mast type: Triplex Height of retracted mast: 4,460 mm Mast height, fully extended: 11,040 mm Overall truck length (forks retracted): 3,846 mm Truck width: 1270 / 1520 mm Ground clearance: 60 mm Dead weight (without battery): 6,790 kg Battery (weight): 1,760 kg Turning radius: 1,698 mm Working aisle width: 1,760 mm Distance between racks: 1,850 mm Fork length: 1,200 mm Travel speed with/without load: 10 / 12 km/h (programmable) Lifting/lowering speed: 0.4 / 0.4 m/s Traction battery (acid): TAB Standard 48V 8EPZS1240Ah + BFS Rectifier (high efficiency): Polar Q420LOG 24/36/48V, 20-180A (programming, analytics) Braking system: electro-mechanical Rollers/wheels: Vulkollan (PU) Signaling devices (no wiring required): included Net price: EUR 97,700 / unit, excluding shipping and assembly/commissioning The narrow aisle reach truck comes from the official distribution of Toyota Material Handling Poland. If interested, please contact us.

Condition: good (used), Year of construction: 2002, functionality: fully functional, cutting height (max.): 300 mm, cutting width (max.): 360 mm, overall weight: 780 kg, table height: 300 mm, cutting range round steel at 45°: 265 mm, cutting range round steel at 90°: 303 mm, cutting speed: 90 mm/min, Sawcapacity at 90 degree: Round: Ø303 mm Square WxH: 360 x 305 mm Sawcapacity at 45 degree: Round: Ø265 mm Square WxH: 265 x 300 mm Sawcapacity at 30 degree: Round: Ø175 mm Square WxH: 175 x 300 mm Sawingspeed: 20 - 90 m/min. Sawbelt dimensions: 3830 x 25 x 0,9 mm / 3850 x 27 x 0,9 mm Workingheight: 700 mm Featured with: - Mitre sawing - Half automatic - Materialrollerconveyor ca. 8 meter - Machine manuals Country of origin: Germany Motor power: 1,1 kW Machine LxWxH: 2200 x 1250 x 1650 mm Nlodpfxjyac Uie Alnec Machine weight: 780 kg

Condition: used, Year of construction: 2000, cutting diameter 260 mm saw band length 3800 x 27(25) x 0,9 mm cutting width 400 x 260 mm cutting speed 20 - 90 m/min total power requirement 1,85 kW Nledpfoy D A Ewsx Alnsc weight of the machine ca. 0,62 t dimensions of the machine ca. 1,8 x 1,6 x 1,5 m Semi-automatic miter band saw - Miter cutting +/- 60 degrees - Coolant system - Emergency stop

Condition: good (used), Year of construction: 1985, range L-W-H 400x300x200 mm saw diameter 420 mm weight of the machine ca. 3500 kg Producer: KASTO Type: HBA 420U Year of manufacture: 1985 Dimensions (width x height x depth): approx. 400x200x300 cm At7Zcq Fully automatic NC horizontal bandsaw 1 chip conveyor, 1 external chip conveyor, 1 person. driven roller conveyor Nodpfovf N Suox Alnolc approx. 450 cm.

Condition: good (used), Year of construction: 1995, range L-W-H 3,50/2,40/2,20 mm weight of the machine ca. 3500 kg Producer: KASTO, Type: HBA 420 AU, C93I8De Year of production: 1995 Fully automatic NC horizontal band saw with hydraulic clamping device up to 400 mm, 1 chip conveyor, 1 external chip conveyor, 1 roller conveyor, 1 roller conveyor, hydraulic drive, motor switched off, Nljdpfx Aljw N S Ecjnjc Dimensions (width x height x depth): approx. 400x200x350 cm

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Bandsaw MACC SPECIAL 411 CSO, year 2019 Condition: very good - Sawing machine with cutting band falling controlled by hydraulic - Vice closure operated manually - Manual head return - Vertical rotation on bolt with adjustable tapered bearings without backlash - High-capacity band control by two-speed motor and special reducer with bronze gear tempered and ground worm screw - Blade tensioning obtained per manual rotation of the handwheel and guaranteed by microswitch - Vice with device for quick approach - Accident-preventing devices on flywheel casing, on control handle, on blade, and external guard Nledpepmaubefx Alnsc - Hydraulic cylinder for controlled descent - Cutting thickness 1,2 mm - Cutting range 45° left 60° right - Adjustable end stop for cuts of the same size - 24 V low voltage control - 0,06 kW power-driver pump for band cooling - Pedestal with chip collection tray and removable tank for coolant - Inlet conveyour

Condition: refurbished (used), Year of construction: 2011, Used automatic metal band saw MEP SHARK 282 nc evo Year of manufacture: 2011 Blade dimensions: 2950x27x0.9mm Cutting angle: from -45° to +60° Four operating modes: manual, semi-automatic dynamic, semi-automatic, and automatic Blade cutting speed: from 15 to 100m/min Njdpeykvg Hjfx Alnjlc Cutting capacity at 0°: - round 250mm - square 220mm - rectangle 280x220mm Machine weight: 980kg The machine is fully refurbished.

Condition: like new (used), Year of construction: 2025, Horizontal thin-cut band saw with 3 heads 300 mm working width Nedpfx Alsvwbg Uenjlc With 3 cutting heads, to make max 4 slats in one run New 2025 model with bigger wheels and inverters on wheels. Touchscreen Schneider, PLC and Inverters Schneider Germany 970mm wheels for higher cutting speed Frequency controllers on the wheels for adjustable cutting speed. For slats from 2 mm * same as new *

Year of construction: 1998, condition: good (used), Maximum width of the workpiece 410 mm Maximum height of the workpiece 410 mm Nodjigwcnopfx Alnjlc Saw speed 10> 200 m / min Band saw length 41 x 1.1 x 5940 mm 8.7 kW power required Weight 4 tons Characteristics: - Torque Control: measures the torque required for the cutting operation. If the load is excessive, it immediately interacts with the hydraulic circuit to reduce the feed rate to optimal cutting conditions in relation to the cross-section of the material and the condition of the saw blade. - System 9000: allows the operator to select the cutting speed (feed motion) depending on the type of material being cut. At the same time, the feed speed (entering the material) adjusts automatically to generate the optimal chip thickness. Nevertheless, the operator has the option of adjusting the production rate to a specific application by increasing or decreasing it. - The efficiency of the devices mounted on the deb series machines allows the maximum use of the blade capabilities without exceeding them, which translates into long-term productivity and precision. Compucut PLC control

Condition: used, Year of construction: 2006, cutting diameter 440 mm saw band length 5200 x 1,1 x 34 mm cutting width 610 x 440 mm total power requirement 3,7 kW weight of the machine ca. 0,8 t dimensions of the machine ca. 2,7 x 1,55 x 1,5 m Nsdpfxoy Aa H Ao Alnolc Band saw horizontal - Coolant system - Emergency stop switch

Condition: new, cutting diameter 220 mm saw band length 2455 mm table height 850 mm cutting width 230 mm cutting speed 25 - 80 m/min dimensions of saw-band 2455 x 27 x 0,9 mm 90 mm 90 mm 90 x 100 mm 150 Impact energy 150 Air consume per blow 150 x 210 220 mm stroke back stop 210 mm cross-slide 230 x 185 total power requirement 1,2 kW weight of the machine ca. 0,24 t dimensions of the machine ca. 1,2 x 0,6 x 1,7 m SPECIAL PRICE!!! -Miter cuts up to 60° left Nljdpfsd Iip Tox Alnec - Cutting speed 25 - 80m/min. - Vice with quick release device -Carbide saw band guide -Tape tension control -Electr. automatic cooling Auto-Cut-System = 3 step system -Automatic saw frame lowering via the hydraulic cylinder -Infinitely adjustable feed -with limit switch - rapid lowering of the saw frame from the rest position to the workpiece, then switch to normal saw feed -Manual mode

Condition: new, capacity 90 degrees: round 305 mm capacity 90 degrees: square 260 mm 350x200 saw band length 3375x27x0,9 mm band speed 37 + 74 m/min Nledod Iipxjpfx Alnec table height 940 mm total power requirement 1,5/1,8 kW weight of the machine ca. 0,65 t dimensions of the machine ca. 1,5 x 1,75 x 1,9 m SPECIAL PRICE!!! Double miter metal band saw, hydraulic semi-automatic GBS 305 HA-I Easy - Miter cuts up to 60° left and 45° right - Material height button - Ball bearing turntable - hydraulic Vice, laterally displaceable - Massive, large material support - Automatic cooling

Condition: new, capacity 90 degrees: round 305 mm capacity 90 degrees: square 260 mm 350x200 saw band length 3375x27x0,9 mm band speed 18 - 100 m/min Nledpfx Aefgyiaelnjc table height 940 mm total power requirement 1,5 kW weight of the machine ca. 0,65 t dimensions of the machine ca. 1,5 x 1,75 x 1,9 m SPECIAL PRICE!!! Double miter metal band saw, hydraulic semi-automatic GBS 305 HA-I Easy - Miter cuts up to 60° left and 45° right - Material height button - Ball bearing turntable - hydraulic Vice, laterally displaceable - Massive, large material support - Automatic cooling

Condition: new, capacity 90 degrees: round 255 mm capacity 90 degrees: square 240 mm 300 x 180 saw band length 2.765 x 27 x 0,9 mm mm table height 950 mm band speed 18 - 110 m/min total power requirement 1,5/1,8 kW weight of the machine ca. 0,42 t Double miter metal band saw, GBS 250 Super AutoCut - Miter cuts up to 60° left and 45° right - Ball bearing turntable - Quick release vice - Massive, large material support - Automatic cooling Nlodefgyh Tepfx Alnjc

Condition: new, capacity 90 degrees: round 250 mm capacity 90 degrees: square 210 mm 290 x 210 mm saw band length 2.965 x 27 x 0,9 mm mm table height 940 mm band speed 25 - 90 m/min Nlodpfx Aljfgyh Ronec total power requirement 1,1 / 1,3 kW weight of the machine ca. 0,35 t dimensions of the machine ca. 1,3 x 0,8 x 1,5 m ATTENTION SPECIAL PRICE!!! (20347) Double miter metal band saw with: - Belt speed 25 - 90 m/min - Miter cuts up to 60° left and 45° right - Ball-bearing rotary table for quick miter adjustment - Quick-action clamping stick can be moved - Quick release lever - Automatic cooling