Used Sica C800 for sale (156)

Condition: ready for operation (used), Year of construction: 1999, Make: HERMLE Type of machine: C 800 V Year of manufacture: 1999 Control system: Heidenhain 430 Machine's weight: 7000 kg Tool holder: SK 40 x-travel: 800 mm y-travel: 600 mm Guedpfx Ajyfgtaea Esd z-travel: 500 mm Speed range: 8 000 min⁻¹ Table dimensions: 1000 × 560 mm Number of tools in the magazine: 30 Pl.

Year of construction: 1990, operating hours: 23,710 h, condition: ready for operation (used), This dryer from Motan is in machine storage at Plastima Used Machinery. The dryer is from 1990 and is in good condition. – Brand: Motan – Model: MDC 800 Gedpfemgadpjx Aa Esud – Construction year: 1990 – Working hours: 23,710

Condition: used, Perkin Elmer Instruments Differential Scanning Calorimeter with Cooling, DSC 8000, N5340524 Model: DSC8000 Type: N5340524 Condition: Used General: Dual-furnace differential scanning calorimeter with power compensation, Perkin Elmer DSC 8000, equipped with Intracooler 2. Enables precise heat flow measurements from approx. –70 °C to 750 °C with high sensitivity and rapid thermal response. General Instrument Specifications DSC Type: Dual furnace design (independent sample and reference furnaces) Measurement Principle: Power compensation Furnace Material: 90% platinum alloy Temperature Sensors: Distributed platinum resistance thermometers Temperature Performance Standard temperature range: approx. –180 °C to 750 °C (with suitable cooling accessories) With Intracooler 2: approx. –70 °C to 750 °C Minimum Temperature (Intracooler 2): approx. –80 °C Heating Rate: 0.01 to 300 °C/min Cooling Rate: 0.01 to 150 °C/min Measurement Performance Dynamic Range: ±800 mW (typical) High sensitivity and fast response due to low-mass furnace design Excellent baseline stability and temperature accuracy Gas and Atmosphere Control Two regulated gas lines with automatic switching Typical purge gases: nitrogen, helium, argon Supports high gas purity (up to 99.999%) Interfaces and Connections USB Ethernet (LAN) Gas inlet connections Connection for cooling unit Power supply connection Accessory ports (e.g., autosampler, high-pressure cell, UV/photocalorimeter module) Temperature calibration interface Technical Data 3.15 AMP T (5 x 20 mm) 250 V 100–240 VAC 50/60 Hz Maximum power consumption 400 VA Accessories Cooling system: PolyScience Intracooler 2 Norgren gas pressure regulator with gauges for external gas supply Autosampler with 96 positions High-pressure DSC cells, UV/photocalorimeter accessories IEC power connection Documentation PolyScience Intracooler 2 Model: N5341746 P10N9E402E Voltage: 240 IP-100 Hz/A/Ph: 50/7.5/1 Refrigerant: 350 g R-404A Note on Item Condition: Guodeyluicjpfx Aa Ejd Without software/PC

Condition: used, Hydraulic Copying Device SAUTER Type KMC 8001 Copy turning attachment, copying device for lathes The copying device comes from a lathe. Connections for oil supply and oil return Copy stroke: approx. 140 mm Radial travel at 60° mounting: 120 mm Required operating pressure: approx. 25 bar Oil flow rate: max. 7 liters/min. Gjdsxxmf Iepfx Aa Ejud Lathe drive power: max. approx. 15 kW Chip cross-section: max. 3.5 mm² Copying slide stroke: approx. 125 mm Distance from turning tool to tracer: 800 mm Net weight of copying device: 120 kg Good condition The matching hydraulic power unit and holders for the pattern parts can be found on our website under the search term 'Sauter'.

Condition: ready for operation (used), Year of construction: 2001, operating hours: 20,222 h, functionality: fully functional, machine/vehicle number: 14631, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 16,000 rpm, spindle diameter: 70 mm, No reserve price – guaranteed sale to the highest bidder! The payment deadline for the machine is 20/11/2025! Placing a bid obligates you to collect the machine within the period from 01/12/2025 to 05/12/2025! TECHNICAL DETAILS Travel distances Travel range X-axis: 800 mm Travel range Y-axis: 600 mm Travel range Z-axis: 500 mm Rapid traverse in X, Y, and Z axes: 35 m/min Max. spindle speed: 16,000 rpm Gedpfexnkwgox Aa Ejud Clamping table surface: 1,000 x 560 mm Spindle taper: HSK A63 (DIN 69063) Spindle diameter at front bearing: 70 mm MACHINE DETAILS Control: HEIDENHAIN TNC 430 Dimensions & Weight Dimensions (L x W x H): 3,300 x 2,400 x 3,000 mm Weight: 7,000 kg Coolant tank capacity: 300 l Operating hours Spindle hours: 20,222 h Power-on hours: 49,977 h EQUIPMENT 3D probing system Technical documentation Note: The mounting plate currently fixed on the worktable, as well as tool holders and tools, are not included in the scope of delivery or sale.

Condition: refurbished (used), functionality: fully functional, power: 30 kW (40.79 HP), input voltage: 400 V, input frequency: 500 Hz, workpiece length (max.): 3,400 mm, workpiece width (max.): 1,800 mm, workpiece height (max.): 200 mm, table length: 4,500 mm, table width: 2,300 mm, table height: 1,800 mm, table load: 500 kg, 5-Axis Waterjet Cutting Center equipped with: - integrated working tank - 4.200 bar full electric e-drive™ - 19” numerical control - abrasive pressurized tank Godpfsxbgvfjx Aa Eoud - cutting head - watercad-cam software accessories included - 5 axis ±55° interpolating system and touchwave ce-ramic™ - loading and unloading system - light laser barriers Included expenses: - Installation of the machine(s) - Machine full-load start-up - Practical training to BUYER’S staff on the machine functions

Condition: like new (used), Year of construction: 2017, workpiece weight (max.): 3,000 kg, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 510 mm, workpiece height (max.): 510 mm, workpiece width (max.): 1,250 mm, workpiece length (max.): 975 mm, empty load weight: 4,200 kg, Equipment: cooling unit, Fanuc Robocut C800iB - Model Year 2017 Fanuc's largest wire EDM machine AWF Automatic Wire Threading Turkish Control Unit - Touchscreen Fanuc Link i Remote Control Water Cooler Core Joint Part Holding Twin Servo Wire Tension Control Thermal Compensation Fanuc New Series 15" Touchscreen and Turkish Control Unit Able to make 5 cuts with the standard new power supply and achieve a surface quality of 0.30 microns. New lower head design and lower head tube protected by bellows. Twin Servo wire tension control ensures consistently stable wire tension during cutting, resulting in more precise cuts. Advanced AWF2 system allows for wire threading at the point of breakage. Program transfer and remote control via CF card, USB, RS232C, and Ethernet Standard Features Maximum throughput workpiece clamping (mm): 1250 x 975 x 500 mm Maximum workpiece weight (kg): 3000 kg X-Y axis travel (mm): 800 x 600 mm Z axis travel (mm): 510 mm U-V axis travel (mm): 200 x 200 mm Maximum cutting angle (°/mm) std. Maximum cutting angle (°/mm) opt.: ±30° / 150 mm : ±45° / 70 mm Minimum axis travel (mm): 0.0001 Wire diameter (mm): Ø 0.1 ~ Ø 0.30 Maximum wire weight (kg): 16 kg Footage (mm): 2900 × 3260 mm Machine weight (KG): 4200 kg Gedpfx Ajxfaqkja Esud Control unit: FANUC

Condition: new, functionality: fully functional, operating pressure: 180 bar, high-pressure hose length: 10,000 mm, input voltage: 400 V, overall weight: 123 kg, warranty duration: 24 months, temperature: 80 °C, The HDS 8/18-4C Classic model focuses on structural refinement compared to its predecessor, the HDS 8/18-4M. The pump and boiler design have been improved, making this the most advanced version of the hot water model currently available. Its balanced construction allows for single-person operation and transport. The brass pump head and automatic pressure reduction system extend the service life of the unit. A large water filter protects the pump from any contaminants present in the water. Product Benefits: A reliable crankshaft pump and water-cooled motor ensure maximum efficiency and long-lasting operation. The open design allows for easy access to all necessary components. A sturdy steel tubular frame ensures maximum protection and easy transport, for example, by crane on the construction site. Integrated crane hooks and large, puncture-proof wheels facilitate transport to and from the construction site. The ECO mode allows you to optimize fuel consumption (up to 20%). The brass pump head and automatic pressure reduction system extend the life of the device. A large water filter protects the pump from any contaminants present in the water. Gsdpfx Aewkq I Hja Ejud Technical Specifications: Condition: NEW Model: HDS 8/18-4C CLASSIC Manufacturer: KARCHER Country of Production: Germany Series: Professional Thread Type: KARCHER !EasyLock Series Power Supply (~/V/Hz): 3 / 400 / 50 Pump Output (l/h): 400 - 800 Working Pressure (bar/MPa): 30 - 180 Maximum Pressure (bar/MPa): 235 Water Heating Range (°C): ~80 Connected Power (kW): 5.5 Power Cable (m): 5 Weight (kg): 123 Fuel Tank (l): 30 Dimensions (L x W x H) (mm): 1075 x 722 x 915 Equipment: Pressure Gun: Karcher Professional High-Pressure Hose: Karcher Professional – 10 m, Lance: Karcher Professional 1050 mm Nozzle: POWER Karcher Professional Pressure Nozzle Key Features: Mobility: The unit is equipped with large, puncture-proof wheels that allow safe maneuvering on uneven surfaces. Construction: Brass pump and 4-pole, cooled, low-speed motor. A pressure reducing valve after the unit is switched off ensures the longest service life and high operating parameters. Easy Transport: Integrated crane hooks facilitate transport of the unit on the construction site.

Condition: good (used), Year of construction: 2018, operating hours: 7,819 h, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 720 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, STANDARD TECHNICAL SPECIFICATION – MAZAK CAPABILITIES Table work surface (length): 2,500 mm Table work surface (width): 820 mm Longitudinal (crosswise) X-axis travel: 2,000 mm Column (crosswise) Y-axis travel: 800 mm Spindle head (vertical movement) Z-axis: 720 mm Minimum distance from spindle nose to top of table: 140 mm Maximum distance from spindle nose to top of table: 860 mm Table load capacity (uniform load): 1,700 kgf Spindle head rotation (B-axis): ± 110° SPINDLE HEAD Spindle taper: 7/24 taper, No. 40 Maximum spindle speed (standard): 18,000 min⁻¹ Minimum spindle speed (standard): 35 min⁻¹ Main spindle motor output (continuous rating): 26.0 kW FEED RATES Rapid traverse (X-axis): 50 m/min Rapid traverse (Y-axis): 50 m/min Rapid traverse (Z-axis): 50 m/min TABLE Table length: 2,500 mm Table width: 820 mm T-slot width: 18 mm Number of T-slots: 7 Distance between T-slot centers: 100 mm Height from machine base to table surface: 870 mm AUTOMATIC TOOL CHANGER Tool storage capacity (standard): 30 Tool storage capacity (optional): 48 Tool selection: Mazatrol memory random access type Tool shank: CAT-40 / MAS BT-40 Max. tool diameter with adjacent tools: 80 mm Max. tool diameter without adjacent tools: 130 mm Max. tool weight (with holder & taper pin): 8 kgf Max. total tool magazine weight: 150 kgf Max. tool length (from gauge line): 350 mm Tool change time (chip-to-chip): 4.7 s MACHINE DIMENSIONS Machine height (from floor): 3,355 mm Machine width: 4,250 mm Machine depth: 4,046 mm Machine weight: 14,000 kg OTHER Gjdpfx Aaoya Hngs Eoud Power supply voltage: AC380/400/415V ±10% Power supply frequency: 50/60 Hz ±1 Compressed air pressure: 0.5–0.9 MPa Compressed air capacity: 260 l/min Coolant tank capacity: 450 L STANDARD MACHINE EQUIPMENT – MAZAK GENERAL MACHINE OPTIONS Foundation kit (base bolts & plates) One set of adjusting tools Work area lighting Power transformer for European market USB I/F (1 port) MANUALS, DOCUMENTATION One set of documentation (CD) SPINDLE SPEED Spindle speed: 18,000 rpm (#40) MACHINE FRAME COLOR Mazak standard color (F white / S black) SAFETY, HEALTH Global safety measures Work area door interlock with locking switch Full machine enclosure Full-cover chip and coolant protection TOOL MAGAZINE 30-position tool magazine COOLING SYSTEMS Complete cooling system HIGH PERFORMANCE/HIGH PRESSURE COOLANT Through-spindle coolant (5 bar, 71 PSI) PRODUCTION AUTOMATION SYSTEMS Automatic ON/OFF + warm-up MEASURING SYSTEMS Automatic tool length measurement & tool breakage detection POSITIONING SYSTEM Absolute positioning system CHIP CONVEYOR Preparation for chip conveyor (left side) NC CONTROL UNIT – 15 Functions 19" color LCD (touch screen) 3-D coordinate conversion Position sensor B) Shape compensation for rotary axes EIA/ISO code input function (standard) Background tool path check LAN connection High smoothing control Mazak 2D software (shape compensation) Mazak 3D high-speed software package Mazak thread tapping / pre-tapping Tornado (Mazatrol) Mazatrol SmoothX CNC Movable control panel SD memory I/F (1 slot) + USB I/F (1 slot) Smooth standard software

Condition: repair required (used), Two desiccant air dryers in need of repair. Suitable for a handy person or as parts donors. Model MDC 800, power 42 kW, year of manufacture 1990 and 1994. Price for both units only 2850 EUR! Gedpfjxtvb Ijx Aa Ejud

Condition: excellent (used), Year of construction: 2003, Arburg 420C-800-250 Closing 80 tons Scrow 30 mm Godpopdr Dcefx Aa Eeud year 2003 Spars wide 42x42 Spray weight 97 g

Year of construction: 1990, condition: used, pressure 80 t throat 250 mm stroke 5/95 mm table surface area 805 x 510 mm distance table/ram Hub unten - 400 mm tool hole in ram 45 mm Gusdpfx Aasfn Aqnj Eod ram adjustment 100 mm ram surface 360 x 300 mm no. of strokes 55 Hub/min total power requirement 5,5 kW weight of the machine ca. 4 t dimensions of the machine ca. 0,83 x 1,7 x 2,6 m

Condition: ready for operation (used), functionality: fully functional, empty load weight: 4,000 kg, maximum load weight: 14,000 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 05/2013, loading space length: 7,300 mm, loading space width: 2,520 mm, total length: 9,300 mm, total width: 2,550 mm, suspension: air, tire size: 315.80 r22.5, color: silver, trailer brake: trailer braked, Year of construction: 2013, Equipment: ABS, Used Zorzi open-sided flatbed trailer, 2 axles, equipped with disc brakes, air suspension, EBS, 80 cm high aluminum side panels, which can be opened and removed, front bulkhead height 160 cm, usable loading deck of 7.30 m, alloy wheels, year 2013, inspected until 31.03.2026. DEALER: INTERDRIVE SRL-PARMA. Godpjya U U Iofx Aa Ejud

Year of construction: 2010, condition: ready for operation (used), A vertical injection molding machine Arburg with a horizontal injection unit is available. Clamping force: 800kN, opening stroke: 500mm, min. mold installation height: 250mm, platen distance: 750mm, platen dimensions X/Y: 570mm/570mm, max. mold weight: 600kg. Machine dimensions X/Y/Z: approx. 4300mm/1700mm/2100mm, weight: approx. 3500kg, operating hours: 44117h. Documentation available. On-site inspection is possible. Gjdpfxsyddy Uj Aa Eoud

Condition: ready for operation (used), Year of construction: 2015, A CNC vertical long-bed machining center Mazak is available. Travel X/Y/Z: 3000mm/800mm/720mm, B-axis: 110°, C-axis: 360°, table diameter: 600mm, long-bed table dimensions X/Y: 3500mm/820mm, max. table load: 2500kg, spindle interface: BT40, speed: 18000rpm, rapid traverse: 50m/min, tool stations: 48, coolant pressure: 70bar. Machine dimensions X/Y/Z: approx. 5250mm/3650mm/3200mm, weight: approx. 16100kg, control: Mazatrol Matrix 2, spindle hours: 18502h. Including rotary table Nikken CNC 601MA, high-pressure coolant, center partition wall, Renishaw probe, touch probe RMP 60Q, CAD/CAM software Topsolid 7.18 and postprocessor. Documentation available. An on-site inspection is possible. Guodpox Ih Dmjfx Aa Ejd

Condition: new, Year of construction: 2026, Gannomat hinge boring and hardware insertion machines are hardware manufacturer independent and designed for the precise drilling and insertion of hardware. Robustness, durability and ease of use distinguish our universal hinge drill machines. Short introduction: • Independence from hardware distributors and manufacturers • Precision drilling unit with steel gears and steel clutch • Universal application: hinges, row of holes as well as line drilling, connectors and fittings, handle and through holes, holes for drawer slides, ... • Massive and stable tilt stops • Distance from the front stop to drilling spindles up to 300 mm (Basica Variabel) Godpfsdx Axuex Aa Ejud

Condition: used, Year of construction: 1982, Equipment: cabin, MB-Trac 800 Central gear shift Gsdpfxsxrivpo Aa Eeud Hydraulics Forestry equipment was only installed after refurbishment. The vehicle has never worked in the forest!

Condition: used, Year of construction: 2009, functionality: fully functional, Offered is a turning and milling machine EMAG VLC 800 MT with tool changer. The machine has a turret with 12 tool positions (VDI 50) and a milling spindle with tool changer for up to 96 tools. The tool magazine can be loaded during processing, which reduces setup time and allows the use of sister tools. The proven EMAG turret is available for turning operations on the machine. On the multifunctional VLC 800 MT production center, workpieces up to 800 mm in diameter can be completely processed in a single clamping. The following components will be sold with the machine: - Pick-up station - Extraction unit (IFM) - Coolant system with belt filter - Chip conveyor CONTROL Siemens 840D MACHINE CONNECTION Mains voltage: 400V AC 50 Hz Connected load: 92kW Rated current: 143A Max. backup fuse: 160A The machine is sold on an “as seen” basis, without any warranty claims. The machine will be available from November 2025, machine is in production until Oktober. The machine can be completely overhauled on request. Please do not hesitate to contact us fot further information. Guodpew Au U Uofx Aa Eed

Condition: new, empty load weight: 520 kg, maximum load weight: 2,180 kg, overall weight: 2,700 kg, loading space length: 4,050 mm, loading space width: 2,000 mm, tire size: 185/60R12, Car transporter from the manufacturer ANSSEMS model MSX2700 405x200 BASIC. As standard equipment, the Anssems car trailer has a wooden floor, lashing eyes on the outside of the frame, aluminum drive-on rails that can be inserted under the loading area, low chassis, stable welded steel frame, support wheel and a V-drawbar. We also offer accessories for Anssems car transport trailers such as a high tarpaulin, side wall attachment, wheel stopper, rear support set, tool box, car lashing straps and anti-theft device. Gujderxu Uwopfx Aa Esd

Condition: used, Year of construction: 2023, spiral disc suspension telescopic drawbar cat. III hydr. air brake / harrow DSTS roller lighting certificate for type approval / Guedpfx Aaor Nxy Ne Eed

Condition: good (used), Year of construction: 2004, operating hours: 19,000 h, functionality: fully functional, feed length X-axis: 800 mm, feed length Y-axis: 800 mm, feed length Z-axis: 500 mm, travel distance X-axis: 1,200 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 500 mm, feed rate X-axis: 50 m/min, feed rate Y-axis: 50 m/min, feed rate Z-axis: 50 m/min, spindle speed (max.): 42,000 rpm, spindle speed (min.): 50 rpm, overall weight: 12,500 kg, input voltage: 400 V, input frequency: 50 Hz, Equipment: documentation/manual, rotational speed infinitely variable, HSC800 – 5 axes Control: Heidenhain iTNC530i Travel range (X/Y/Z): 800x800x500 mm Spindle speed: 42,000 rpm Spindle taper: HSK50 Operating voltage: 3x400V, 50Hz Power requirement: 35 kW Compressed air: 8 bar AC motors Digital control Feed rate: 2 to 60 m/min Rotary table clamping surface, diameter: 400 mm Portal clearance width: 1050 mm Height: 650 mm External cooling unit Handheld control panel with handwheel Godpfeyciqcjx Aa Esud Tool changer with 54 positions

Condition: good (used), functionality: fully functional, empty load weight: 4,900 kg, maximum load weight: 17,100 kg, overall weight: 22,000 kg, axle configuration: 2 axles, first registration: 03/1991, loading space length: 7,200 mm, loading space width: 2,480 mm, loading space height: 800 mm, suspension: air, tire size: 315.80 r 22.5, color: blue, Year of construction: 1991, Equipment: trailer coupling, acerbi trailer, 2 axles with air suspension, 3-section 80cm high aluminium side walls, detachable pillars, reinforced sheet metal floor, 7.20m loading length + 1.60m drawbar length, total 8.80m, automatic bell, year 1991, good condition, INTERDRIVE SRL-PARMA DEALER Gjdpfsvcc Ttox Aa Eeud

Year of construction: 1995, condition: ready for operation (used), A defective CNC spring coiling machine BB Spring (Babbio) is available. Wire thickness range: 3mm-8mm, max. outer diameter: 120mm, wire processing speed: 90m/min, power: 35kW, machine dimensions X/Y/Z: approx. 2750mm/3150mm/2700mm, weight: approx. 4000kg. Including a winch plate for winching left springs and a torsion spring device. The motor and drive of the machine are defective. Documentation available. Gjdpfx Asvripmea Eoud

Condition: ready for operation (used), Year of construction: 1999, operating hours: 2,466 h, functionality: fully functional, machine/vehicle number: 13147, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, table width: 560 mm, table length: 1,000 mm, TECHNICAL DETAILS Travel X-axis: 800 mm Y-axis: 600 mm Z-axis: 500 mm Spindle Speed range: 20 – 12,000 rpm Tool holder: SK40 Table Dimensions: 1,000 x 560 mm Tool magazine: 30 positions Guedpfx Aaow Nqh Aj Esd MACHINE DETAILS Weight: 7,000 kg Spindle hours: 2,466 h Machine operating hours: 34,485 h Power: 15 kW (at 40% duty cycle) Frequency: 50 Hz Operating voltage: 400 V Control voltage: 24 V Total rated current: 44 A EQUIPMENT Chip tray Heidenhain TNC430 control Heidenhain touch probe system Extraction unit Electronic handwheel

Condition: used, Year of construction: 2024, spiral disc suspension telescopic drawbar cat. III/IV hy hydraulic / front level board air brake DSTS roller lighting rear harrow DSTS roller / Godpfjtt I N Iex Aa Eeud