Used Servatechnik Paint Mist Extractor for sale (5,452)

Condition: good (used), Extractor fan, welding fume filter, welding fume extraction, soldering fume extraction, small dust extractor, -Manufacturer: Esta, small dust extractor extraction fan for smoke extraction -Type: Esta 100 -Drive: 0.55 kW / 2850 rpm -Fan wheel: Ø 280 mm -Connection: Ø 100 mm -Volume flow: Max. 1000 m³/h -Dimensions: 425/420/H845 mm -Weight: 35 kg Iijdpfx Aepxq Ugohyeh

Condition: good (used), Dust extraction fan, exhaust gas extraction, heating fan, welding fume extraction, extraction, fan, vacuum blower, radial fan, medium-pressure fan Iiodpfxop A A Sas Ahyjh -Manufacturer: Karl Klein, medium-pressure fan type DMV 350 -Motor: away 1.1 kW/ 2765 rpm Voltage: 380 volts -Volume flow: 1260 m³/h -Pressure: 2380 Pa -Connection input: Ø 150 mm -Connection output: 60 x 100 mm -Quantity: 1x piece available -Transport dimensions: 500/485H340 mm -Weight: 30 kg/piece

Condition: new, maximum load weight: 45,250 kg, overall weight: 58,000 kg, axle configuration: > 3 axles, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. The following is an excerpt of the equipment. Complete equipment details are available upon request. Iijdpfx Ajz Dmn Rshyeh Chassis, gooseneck: Special steel frame made of high-strength fine-grained steels, electrically welded at the connection points, well-dimensioned outer frame. 4-axle arrangement. Wheel arches above the axles with spray mist suppression. All steel parts are sandblasted. Lateral impact protection made of anodized aluminum installed. Increased point load of approximately 30,000 kg over approximately 4,000 mm. Special design in the gooseneck area for maximum low-bed length in combination with AluLeg support legs instead of telescopic support winches, maximum rear swivel radius of the tractor unit approximately 2,100 mm. Special superstructure with rear beam widening: DINKEL – special superstructure. Self-supporting aluminum roof beam/profile approximately 120 x 100 mm, sliding cover with plastic flaps. Rear beams can be widened to approximately 4,200 mm (only for loading and unloading). Three sliding beams per side with rubber strap relief. Additional center beam locking mechanisms in the roof beam and parking position, using a pull cable and spring latch. DINKEL – lifting roof mechanically height-adjustable. Lifting roof height approximately 400 mm, operable on both or one side, without opening the opposite side and the doors. Additional height adjustment of approximately 480 mm in approximately 40 mm increments with height adjustment in the beams. Front overhang on the front wall for operation under a tarpaulin up to a total height of approximately 4,400 mm. Four rows of stackable approximately 150 mm aluminum slats on the sides, with 450 mm pockets at the bottom and 4 rows of single pockets above. In the upper bed, only 3 rows of insertable slats. Spacing between slats evenly distributed. Floor: Approximately 27 mm special water-resistant glued beech plywood, rough surface. Steel sheet in the wheel arch area. Forklift drivable according to DIN standard. Outer frame flush with the surface. Brakes: WABCO air brake system with EBS according to EC standard 71/320 EEC including PREV (parking release safety valve). Spring-loaded brake cylinders as parking brake. Wabco Smart Board with odometer and unit load indicator. Includes WABCO tire pressure monitoring system. Axles: 4 x 10,000 kg SAF/Sauer with drum brakes in low-bed design. Air suspension with lifting and lowering device, total lift approximately 230 mm. Third and fourth axles as friction-jointed trailing axles with electrical and mechanical lock. Twin tires: 235/75 R 17.5, -16-ply. Manufacturer of our choice, including E-wheel holder. Without E-wheel. Lighting: according to EC standard including side lights in LED design. Position lights in LED design. 2 additional reversing lights. 2 work lights on the front wall inside, at the top. Painting: Chassis and superstructure in a single color in the RAL color of your choice. Center beams, axles coated with KTL (cathodic electrodeposition) in black. Corner beams in hot-dip galvanized design. Plastic parts in black. Hot-dip galvanized parts unpainted. Rims in factory silver. Special equipment included: - E-supply cable 15-pin - Air suspension in ECAS design, operated on the semi-trailer - Overwidth signage at the front and rear in zinc-plated, continuously telescopic design with attached boundary lights including so

Condition: used, mileage: 847,500 km, power: 552 kW (750.51 HP), first registration: 12/2015, fuel type: diesel, axle configuration: 6x4, fuel: diesel, color: other, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, Year of construction: 2015, Equipment: ABS, electric window regulation, fog lights, parking heater, power assisted steering, power mirror, spoiler, = Additional options and accessories = - Air horn - Air suspension - Alloy wheels - High Beams Ijdpoz Ahwtsfx Ahyjih - Immobilizer - I shift - PTO - Radio CD player - Refridgerator - Roof Spoiler - Sleeping cabin - Speed limiter - Sper - Toolbox = Remarks = Volvo FH750, December 29, 2015 847,500 km Euro 6, 6x4, I-Shift, Dynamic steering = More information = Front axle: Steering Rear axle 1: Double wheels Rear axle 2: Double wheels GVW: 29.000 kg Extendable superstructure: Yes = Dealer information = Bank data: Rabobank Account: 39.33.10.655 IBAN: NL73RABO0393310655 Swift code: RABONL2U - Always check our bank details before transaction! - Reservation of vehicles is not possible without a deposit. - Writing and text errors are reserved for all vehicles offered.

Condition: ready for operation (used), Year of construction: 2013, operating hours: 12,486 h, functionality: fully functional, travel distance X-axis: 3,400 mm, travel distance Y-axis: 2,300 mm, travel distance Z-axis: 1,000 mm, spindle speed (max.): 18,000 rpm, controller model: Siemens 840D sl, TECHNICAL DETAILS Travel range X-axis: 3,400 mm Travel range Y-axis: 2,300 mm Travel range Z-axis: 1,000 mm Rapid traverse X-axis: 60 m/min Rapid traverse Y-axis: 60 m/min Rapid traverse Z-axis: 40 m/min Iijdpjz Izdujfx Ahyeh Design: C3 swivel head Swivel range C-axis: 200° Swivel range A-axis: 120° Spindle motor power: 24 kW Spindle mounting: HSK 63 A Spindle speed: 18,000 rpm Spindle cooling: Water cooling Design: Disc tool changer Tool magazine positions: 20 Pick-up positions: 1 Tool diameter: up to Ø 500 mm Table length: 2,000 mm Table width: 1,500 mm Table thickness: 30 mm Grid spacing: 100 x 100 mm Maximum load capacity: 2,000 kg Repeatability: approx. 0.012 mm MACHINE DETAILS CNC control: Siemens 840D sl Spindle operating time: approx. 12,486 hours Power-on hours: approx. 37,297 hours EQUIPMENT 5-axis package: included Advanced Surface: included TCP: included Control panel size: 15 inches Remote maintenance: prepared Workpiece measuring probe: m&h wireless measuring probe Tool measurement: BLUM laser Minimum quantity lubrication: internal and external lubrication Central lubrication: automatic Spray mist extraction: with electrostatic separation Full protective cabin: included Tool changing chamber: separate Technical documentation Operating manual Omlat spare spindle included

Condition: ready for operation (used), Year of construction: 2004, travel distance X-axis: 300 mm, travel distance Z-axis: 1,400 mm, total height: 2,400 mm, total width: 2,560 mm, overall weight: 13,500 kg, controller manufacturer: SIEMENS, controller model: SINUMERIK, product length (max.): 5,460 mm, number of axes: 8, This 8-axis Index G250 turn-mill centre was manufactured in 2004. It includes a Knoll chip conveyor, EMAG cooling unit, and ISI mist extraction system. The machine features a hydraulic power chuck with a clamping range of 125–152 mm and an overhead gantry loader for automation. If you are looking to get high-quality turning and milling capabilities, consider the Index G250 machine we have for sale. Contact us for further details. Iijdpfxsznc Nbj Ahyjh - Control Unit: Siemens SINUMERIK / INDEX C 200-4D- Rated Voltage: 400 V AC (3 Phase, 50 Hz)- Rated Current: 74 A- Rated Power: 43 kW- Control Voltage: 24 V DC- Tool Turret: 12-station tool turret with driven/live tool capability (individual powered tools are not included in the scope of delivery)- Workholding: Main spindle with hydraulic power chuck / collet system, SMW-Autoblok SLU-3-ZS hydraulic power chuck (clamping range 125-152 mm)- Steady Rest: SMW-AUTOBLOK / Original SMW Steady Rest (Type: SLU-3-28, Clamping range: 12-152 mm, Max. operating pressure: 60 bar)- SMW Autoblok steady rest: • hydraulic/self-centering steady rest • mounted on its own lower slide • suitable for providing additional support for long or thin workpieces- Tailstock unit with a rotating center on the right side of the work area for supporting longer workpieces- Hydraulic System: Integrated hydraulic power unit operating at 95 bar pressure- Automation / Gantry Loader: Promet Automation gantry loading system overhead- Coolant / Chip System: Knoll chip conveyor / coolant unit (YOM: 2004)- Chiller Unit: EMAG Chiller / Cooling Unit (YOM: 2016, Cooling capacity: 9.5 kW, Refrigerant: 2.5 kg)- Mist Collector / Air Cleaner: ELBARON / ISI RON / A 2500 Electrostatic Air Cleaner / Mist Extractor (YOM: 2004)- Documentation Included: Complete documentations, operating manuals, etc.- Transport Dimensions (L x W x H): Approx. 5460 x 2560 x 2400 mm (width reducible to 2450 mm)- Machine Weight: Approx. 13,500 kg Technical Specification Counter Spindle No Driven Tools No

Condition: good (used), Year of construction: 2002, 040 USED Semi-Stal tunnel basket washer. EXTERNAL DIMENSIONS (in cm.): - H: 230, - W: 250, - L: 1150. WASHING BASKET DIMENSIONS (in cm.): - W: 40, - H: 20-25. The device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: transport / assembly / commissioning of the device. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. ..... Iedpfxovy Uxis Ahyeih bakery oven, bakery ovens, bakery machine, bakery machines, bakery equipment, bakery equipments, bakery device, bakery devices

Condition: good (used), Year of construction: 2005, machine/vehicle number: HSL 1500-8-12/8 GB, type of input current: AC, volume flow: 2,500 m³/h, filter area: 33 m², Dust filter herding with modular fan Iodpfovz Az Iox Ahyeih Technical data: Power consumption 1x15 kW option 2nd 15kw Filter is supplied with 1 side channel fan 2nd side channel fan is optional. Filter surface 33 m² Dust container capacity 40 litres Weight 660 kg Suction connection 2x 160mm Operating volume flow: 2500 m³/h Operating mode: Continuous operation Cleaning: compressed air Compressed air connection must be available side channel fan: brand: Effepizeta Type: SCL K10-TS Power: 15kw Speed: 2908 rpm

Condition: used, empty load weight: 7,200 kg, maximum load weight: 29,600 kg, overall weight: 36,800 kg, axle configuration: 3 axles, first registration: 10/1996, loading space volume: 49 m³, suspension: air, tire size: 385 / 65 R 22,5, color: white, mileage: 1,001 km, fuel type: diesel, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, aluminum rims, 3-axle, air suspension, last axle self-steering, ABS (anti-lock braking system), catwalk Body: Tipping silo 49m³ Pneum. Pneum. holding bar on catwalk ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - . Iisdpfxsvhg D Hs Ahyjh

Condition: used, TECHNICAL DETAILS - Number of axes : 5 LINEAR AXES - X stroke : 400 [mm] - Y stroke : 250 [mm] Iodpfx Aswwa Ddohysih - Z stroke : 250 [mm] - Rapid traverse rate : 24 [m/min] - Resolution : 0.0001 [°] GRINDING WHEEL HOLDER HEADSTOCK VERTICAL - C axis : 225 [°] - angular resolution : 0.0002 [°] - Spindle speeds : 12.000 [rpm] - Tool type : HSK-50E - Spindle power : 15 [kW] PART-HOLDER HEADSTOCK - Rotational speed range (rotary axis) : [rpm] - Rotation speed range (universal rotary axis) : [rpm] - angular resolution : 0.0001 [°] POWER SUPPLY - Supply voltage : 400 [V] WEIGHT & DIMENSIONS - Machine floor space : 2.050 x 2.100 [mm] - Machine height : 1.960 [mm] - Machine weight : 2800 [kg] EQUIPMENT - CNC : SIEMENS SINUMERIK 840D - Lubricating tank with pump * with cooling unit for coolant - Oil mist extractor : ABSOLENT ODR 2000

Condition: used, TECHNICAL DETAILS - Number of axes : 3 MILLING SPINDLE - Tool holder type : BT30 - Spindle power : 2.2 / 3.7 [kW] - Spindle speeds : 15.000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 300 / 250 / 250 [mm] - Rapid traverses rates (X/Y/Z) : 48 / 48 / 48 [m/min] TOOL CHANGER - Auto. Tool Changer type : Parapluie - Tool magazine capacity : 12 - Tool exchange time : 1.6 [sec] PALLET CHANGER - Table dimensions : 400 x 250 [mm] - Pallets number : 2 - Maximum weight upon table : 100 [kg] - Pallet exchange time : 3 [sec] - Distance table / spindle nose (min./max.) : 180 - 430 [mm] POWER SUPPLY - Supply voltage : 380 [V] Iedpswdamrjfx Ahysih - Total installed power : 21 [kW] WEIGHT & DIMENSIONS - Machine floor space : 2.690 x 1.570 [mm] - Machine height : 2.420 [mm] - Machine weight : 3.300 [kg] EQUIPMENT - CNC : Fanuc Oi-MD - 3 colors status lamp - Coolant tank - Oil mist extractor - Fire extinguisher * * NB : working order not guaranteed. To have it checked by a qualified organization of the buyer.

Condition: not inspected (used), Year of construction: 1995, Connected load 380V 2.2kW Intake nozzle 200 mm mobile 2x chip bins á 190l Iijdsvz Uhyepfx Ahyjh Volume flow 2500 m³/h HxWxD: 2160 x 830 x 1900 mm

Condition: used, TECHNICAL DETAILS - Number of spindles : 6 - Number of counter-spindles : 1 - Max. travel of front spindles : 120 [mm] - Max. bar feed : 130 [mm] SPINDLES * Max. bar diameter : 35 [mm] * Spindle speeds : 218-4000 [rpm] COUNTER-SPINDLE - Single-acting hydraulic counter-spindle - Counter-spindle position : 6 POWER SUPPLY - Supply voltage : 400 [V] WEIGHT & DIMENSIONS - Machine floor space : 5950 x 1680 x1980 [mm] - Machine weight : 10500 [kg] - Number of working hours : 10946 [h] EQUIPMENT - Standard cutting carriage, in position : 6 Iodpfeu Habmjx Ahyeih - Hydraulic cylinder for rear attachment, in position : 6 - Fixed front spindles, in position : 1,2,3,4,5 - Thread milling and polygon unit - Parts catcher - Parts conveying strip - Chips conveyor - Coolant tank - Bar loader : Iemca PRA 40/42F - Bar holder and stand - Bar holder housing - Oil mist extractor : Donaldson

Condition: used, This listing is for an Astoria-Pacific 311 Chemistry Analyser The unit is in full working condition and is ready for immediate use This combination is for 1. Astoria-Pacific 311 AutoSampler 2. Model 302D Micropump - Computer controlled 3. Model 303 Flow System 4 Model 305D Digital Detector Overview of the Astoria-Pacific 311 Sampler The 311 XYZ Sampler is a core component of Astoria‑Pacific's modular segmented flow analysis systems, such as the Astoria and Astoria2 analysers: Iisdpfxoxhftij Ahysh Functionality It acts as a random-access sample introduction system in an XYZ grid format, enabling automated handling of samples in liquid analysis workflows Integration & Automation It is typically integrated with detectors, peristaltic pumps, and cartridge bases to form a complete automated analyzer capable of walk‑away operation and high throughput, with assay results available within 15–20 minutes upon sample loading Throughput & Sensitivity When paired with the Astoria Analyzer, systems using the 311 sampler can process between 90 to 120 samples per hour, delivering part-per-billion detection capabilities along with efficient reagent usage (up to 10× lower compared to traditional SFA systems) System Flexibility The 311 sampler offers flexibility and ease of use, allowing automatic insertion of check calibrants and compatibility across different system configurations (e.g., Astoria2, SFA3000) Support Modules For optimal performance, it can be paired with auxiliary modules such as the 322 Auxiliary Pump, which serves as a dedicated wash pump for the sampler4115 302D 303 305D Autosampler +

Condition: good (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 81362, travel distance X-axis: 305 mm, travel distance Y-axis: 305 mm, travel distance Z-axis: 330 mm, rapid traverse X-axis: 48 m/min, rapid traverse Y-axis: 48 m/min, rapid traverse Z-axis: 48 m/min, controller model: Fanuc 18i-MB, total height: 2,200 mm, total length: 3,300 mm, total width: 2,000 mm, table width: 250 mm, table length: 250 mm, overall weight: 4,600 kg, spindle speed (max.): 15,000 rpm, number of spindles: 1, number of slots in tool magazine: 40, Equipment: chip conveyor, documentation/manual, Kitamura Mycenter HX250iF, year 2011 Serial number: 81362 *Main spindle bearings replaced 07/2026 - CNC control unit: Fanuc 18i-MB - Spindle power: 11.2 [kW] - Spindle speed: 15000 [rpm] - Travels in X/Y/Z axes: 305 / 305 / 330 [mm] - Rapid traverse (X/Y/Z): 48 [m/min] - Number of tool positions: 40 - Tool holder type: BT30 - Tool change time: 1.2 [s] - Pallet size: 250 x 250 [mm] - Number of pallets: 2 - Maximum weight per pallet: 110 [kg] - Distance center of table/top of spindle: 380 [mm] - Machine dimensions: 3,300 x 2,030 × 2,300 [mm] - Machine weight: 4,600 [kg] Equipment - Manual command - 3-color status light - Coolant tank with high-pressure pump - Oil mist extractor - Chip conveyor - Spindle cooling unit Iijdexur E Sopfx Ahysh - Renishaw 3D probe - Renishaw tool measurement - Transformer - Approx. 150 tool holders

Condition: ready for operation (used), Year of construction: 2006, working width: 150 mm, overall weight: 150 kg, Conveyor Belt 2500 mm Manufacturer: Makor Type: TEP 2500 Powered conveyor belt from a finishing line (positioned in front of a Makor profile spraying machine), Length approx. 2500 mm Belt width: 150 mm Pass-through width (with existing side guides): max. approx. 320 mm Ijdpfx Aoxtnfrshyoih Feed speed steplessly adjustable via variator Equipped with stable, adjustable side guides Dimensions approx. 2500 x 550 mm (LxW) Weight approx. 150 kg Documentation available

Condition: excellent (used), Year of construction: 2009, operating hours: 32,955 h, load capacity: 180 kg, arm reach: 2,550 mm, controller model: IRC5, The IRB 6640 serie is ABB Robotics latest generation of high payload, high performance industrial robots. Based on the famous IRB 6600 series, with the flexible bending backwards concept, the very high wrist torque, the service friendly modular built up and the availability, significant for ABB’s robots, the IRB 6640 robot family goes even further. With focus on high production capacity, compact design and low weight, simple service and low maintenance cost. The IRB 6640 is ideal for process applications, regardless of industry. Typical areas are for example Spot Welding, Material Handling and Machine Tending. Iiodpfx Aowq Sg Dshyeh Specifications Payload: 180 kg Working hours: 32955 Arm Reach: 2550 mm Model Type: IRB6640 Condition: TESTED & PAINTED & BATTERY CHANGED Controller: IRC5 Model Year: 2009 Included: Manipulator + IRC5 Control Cabin + All Wire Sets + Teach Pendant We have a dedicated team handling these robots. If you share details about your project, we can recommend the most suitable robot for your needs and provide support throughout your project. We have big range of robots in stock, and if you are considering bulk purchases, we would be happy to offer a discount. The same model is available from the same or different production years, and bulk purchases can benefit from special pricing. As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with the brands of KUKA, ABB, FANUC and Motoman.

Condition: used, Year of construction: 2021, overall weight: 200 kg, input voltage: 400 V, total width: 800 mm, total length: 1,350 mm, total height: 1,500 mm, volume flow: 216 m³/h, space requirement height: 1,500 mm, space requirement width: 800 mm, space requirement length: 1,350 mm, filter area: 2 m², negative pressure: 31,500 Pa, power: 3 kW (4.08 HP), transport height: 1,500 mm, transport length: 1,350 mm, transport width: 800 mm, tank capacity: 80 l, No. 04520 Mobile extraction unit / mobile dust extractor ESTA WHISPERSOG 3.0 FM Unused, year of construction 2021, in new condition Industrial vacuum cleaner for cleaning work and machine extraction The WHISPERSOG high vacuum cleaners work more quietly than conventional industrial vacuum cleaners with the same performance. They are designed for continuous operation and can be used not only as industrial vacuum cleaners, but also as mobile dust extractors for direct extraction on machines. By using permanent filter cartridges, operating costs can be significantly reduced compared to disposable filters. The dust produced can be easily disposed of using the patented tipping device. Areas of application: Removal of coarse, fine and free-flowing dust during cleaning work / Direct extraction of machines in continuous operation Motor power 3 kW Electrical connection 400 V Maximum negative pressure 31500 Pa Maximum air volume flow 216 m3/h Extraction nozzle diameter 50 mm Filter surface 2m2 Dust collection container 80 liters Potential-free contact for automatic activation when machine is started Iiedpfx Aoylb Ixehysh Including electrical connection cable with 16 A plug, 10 waste bags and technical documentation Transport dimensions approx. 1350 x 800 x 1500 mm LWH Weight approx. 200 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Year of construction: 2016, condition: excellent (used), Painting booth Diana serie with horizontal ventilation Modern technology: Dust free operation paint overspray collection system Stable spraying temprature Control box with safety function Length:16000mm Width:6000mm Height:6000mm Iedpfx Ahsygum Reyoih

Year of construction: 2016, condition: excellent (used), - (dust-free operation, paint overspray collection system, stable spraying temperature, elevated drying temperature) Control box including advanced safety functions and operator-friendly software- (weather condition independent operation, elevated temperature in the drying phase)- (daylight-grade illumination, fire safety, efficient ventilation rendering operator's individual respiratory protection equipment redundant)- Low operation cost : (reduced operating costs owing recirculation of warm air in the drying phase)- (efficient dust collection, low solvent vapor concentration, low air pollutant emission)- Limited operating area requirement : (minimized production area) Length:16000mm Iiodpfx Ahoygu Smoyeh Width:6000mm Height:6000mm

Condition: used, TECHNICAL DETAILS - Distance between centers : 650 [mm] - center height : 175 [mm] - Max. part weight between centers : 80 [kg] - X/Z stroke : 285 / 800 [mm] - Axis X programmable feed speed : [mm/min] - Resolution : 0.0001 [mm] - Axis Z programmable feed speed : [mm/min] - Resolution : 0.0001 [mm] - Table orientation : 0 - 8.5 [°] GRINDING WHEEL HOLDER HEADSTOCK - T1 grinding wheel dimensions : 500 x 63 x 203,2 [mm] - Speed : 50 [m/s] - Power : 9 [kW] - Manual orientation : -15 / +195 [°] - Indexing precision : 2.5 [°] - Internal grinding : 40.000 [rpm] - Power : 3 [kW] PART-HOLDER HEADSTOCK - Type of cone : CM5 - Speed : 1 - 1500 [rpm] - Power : 1.8 [kW] - Boring : 30 [mm] - C axis indexing precision : +/- 0,5 [°] - TAILSTOCK - Type of cone : CM4 Isdpfx Ajylc R Ushyoih - Quill diameter : 50 [mm] - Quill stroke : 35 [mm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 20 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 2.670 x 2.050 [mm] - Machine height : 1.900 [mm] - Machine weight : 4000 [kg] MACHINE HOURS - Number of hours under power : 190 [h] EQUIPMENT - CNC : FANUC Oi-TD - Electronic handwheel - 3 colors status lamp - Oil mist extractor - Linear scales on axes X/Z - Dynamic wheel balancing : MPM - Automatic contact detection : SENSITRON 6 - Fixed dressing device - Workpiece probe - Coolant tank : 375 [l] * with paper filtering unit

Condition: ready for operation (used), Wagner paint unit Paint and lacquer pump MODEL T.371 Iiedpfxsyaqpbj Ahyeh

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Control: SIEMENS 840D Number of pallets: 2 Number of axes: 5 Number of spindles: 2 Tool holder: HSK63 Spindle drive power: 15.5 kW Spindle speed: 17500 rpm Spindle clearance (distance): 300 mm LINEAR AXES Travel X/Y/Z: 300 x 650 x 400 mm Rapid traverse rate (X/Y/Z): 75,000 mm/min ROTARY AXIS A Travel: 360 degrees Iedoycg R Hopfx Ahysih Minimum resolution: 0.001 degrees ROTARY AXIS C Travel: 360 degrees Minimum resolution: 0.001 degrees Number of tools in magazine: 2 x 32 PALLET CHANGER Max. table load: 300 kg Electrical Power Supply Power supply: 400 V Total connected load: 70 kVA Weight and Dimensions Floor space requirements: 3900 x 3260 mm Machine height: 3100 mm Machine weight: 8800 kgs Accessories / Equipment Interface: Ethernet / RS232 / PCMCIA Coolant tank: 400 l With high-pressure pump: 70 bar With paper belt filter: KNOLL PF160/800 With coolant cooling system Internal Coolant Supply (ICS) Chip discharge: Rear Oil mist extractor: LOSMA Darwin 1200 Spindle cooler The machine is in good used condition. Available under power in Hungary.

Condition: used, TORNOS DECO 2000/13 is a CNC automatic lathe engineered for precision machining, high accuracy and dependable reliability. Key capacities: 10 axes; max workpiece length 180 mm; internal spindle diameter 13 mm; spindle speeds 100-12000 t/min; back spindle 100-8000 t/min. Main specs: 50 Hz 3x400 V supply; spindle motor 2.2 kW; total power 11 kVA; weight approx. 2550 kg; footprint L2000×W1260×H1950 mm. Equipment: bar feeder IEMCA GENIUS 226/32, chip conveyor, coolant system, oil mist extractor. Achieves tight tolerances; typical applications: automotive, watchmaking, machine tools, aerospace, medical. Iodpfxjz Dvztj Ahysih

Condition: used, WILLEMIN MACODEL 408S2 is a Machining and turning center from bar with high precision, superior accuracy and reliability. Travels X 250 mm, Y 200 mm, Z 310 mm; B axis -100°/+30°; resolution 0.0001; bar capacity Ø32 mm; tool magazine 24 positions; tool length 95 mm, max weight 1 kg; tool change 0.8 s; Ø with free adjacent pockets 80 mm. Spindle nose HSK E-25, stepless up to 75'000 t/min; voltage 50 Hz 3x400 V; total power 16 kVA; machine weight ~2300 kg; footprint L1840 x W2450 x H1385 mm. Equipment: Renishaw OMP 40-2 touch probe, BLUM Nano NT tool break control, coolant system, oil mist extractor, coolant filter, fire extinguishing system. Delivers tight tolerances; ideal for watchmaking, medical, aerospace, automotive and tooling. Iisdpfszqbhbjx Ahysh