Used Seiffert Grinding Wheels for sale (22,754)

Condition: used, center height: 80 mm, center width: 400 mm, grinding diameter: 80 mm, Cylindrical Grinding Machine Manufacturer: STUDER/GSN Model: S20-0C Overhauled: 2016 Control System: SIEMENS Technical Details: Center height: 80 mm Prods Agcibopfx Adlsc Distance between centers: 400 mm Grinding diameter: 80 mm Max. workpiece weight between centers: 20 kg Grinding wheel dimensions: 300 x 30 mm Workhead spindle speed: 60 – 1,200 rpm Condition: Used The machine was completely overhauled in 2016 and has since been used in a training workshop. Accessories, tools, and work-holding devices shown are included in the scope of delivery only if explicitly stated in the additional information. Subject to changes and errors in the technical data and specifications; prior sale reserved!

Condition: new, neu ca. 2 Wochen ab Auftragse Italien 17940 € 344.45 € Dm. 200x78x78 mm 2800 1/min 300 mm 300x150x55 mm 350x150 mm 500x160 mm 3.6 kW 1020 mm Podjyv Iqvepfx Adljrc 820 mm 2170 mm 440 kg This Grinding machine with fixed table derives from the model R.V. 500 but it differs from it as it is equippedwith a long column supported by four bearings and is opportunely stiffened by a sturdy column support. This Surface grinding machine, due to its stiffness and geometrical stability, is highly suitable for grinding with precision pieces of notable height: single or mass-produced die-shop components, moulds, punches, gears and others. Moreover, the nuts of the vertical translation screw and the dowels to realign the wheel motor to the axis,equipping this model of Grinding machine with fixed table, allow preserving perfect work conditions over the years, too. CAST IRON BED to maintain the geometric stability of the grinding machine in time, too. CAST IRON COLUMN, protected by bellows and supported by four adjustable precision bearings, broadly sized for this type of grinding machine with fixed table. Three-phase MOTOR air-cooled by double jacket, to prevent the overheating of the grinding machine motorduring continuous machining and to keep the temperature of the motor shaft and of bearings constant. Hardened, ground and dynamically balanced SHAFT, supported by precision ball bearings, widely sized for this type of grinding machine with fixed table and self-adjusting by means of springs for the backlash preload, to absorb thermal expansions. VERTICAL TRANSLATION SCREW supported by opposite and adjustable ball bearings, with apt motion for maintaining, in this model of grinding machine with fixed table, the wheel work field free from hindrances and for avoiding dust depositions. Metal BELLOWS for a better protection of the vertical translation screw of the grinding machine. Opposite bronze NUTS, for the recovery of the eventual wear in time of the vertical translation screw of the grinding machine with fixed table. REGISTRATION DOWELS to re-align the wheel motor of the grinding machine to the axis, obtaining parallel surfaces also in time. HANDWHEEL of the grinding machine, supported by three bearings and engaged on the screw by means of a pair of helical gears, equipped with graduated drum, supported by a trust bearing, for a stock removal of mm 0.01 - 0.02 - 0.03 for each single pass; the rapid feed per handwheel turn is mm 2. KNOB WITH JACK, for the programmable micrometric feed of mm 0.01 - 0.02 - 0.03 - 0.04 per pulse, which allows a simple use by avoiding the constant increment control. SLOT to permit the maximum use in height of the work field of the grinding machine wheel and to clamp non-magnetic parts and accessories such as: magnetic chuck, self-centering chuck and squares. Low-voltage CONTROLS, protection, indicator light and all requisites to comply with safety and conformity regulations provided for this type of grinding machine with fixed table. HANDLES, SHAPES AND SIZES of the grinding machine with fixed table designed to meet the current ergonomic recommendations for work. WITH FOLLOWING ACCESSORIES: Magnetic chuck 300 x 150 mm Wheel flange and cup wheel Semiautomatic dresser with diamond Coolant system Operating manual in German or Italian

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: EB1507, grinding length: 600 mm, grinding width: 350 mm, total height: 1,900 mm, total length: 1,900 mm, total width: 1,900 mm, workpiece weight (max.): 320 kg, grinding height: 312 mm, grinding wheel diameter: 355 mm, distance table to spindle center: 490 mm, table speed: 25,000 mm/min, table load: 320 kg, type of input current: three-phase, grinding wheel width: 25 mm, overall weight: 1,700 kg, grinding spindle motor power: 2,200 W, travel distance X-axis: 700 mm, travel distance Y-axis: 490 mm, travel distance Z-axis: 340 mm, rotational speed (max.): 1,500 rpm, grinding spindle speed: 1,500 rpm, input voltage: 400 V, Equipment: documentation/manual, - Factory number: EB 1507 - Automatic vertical feed - Headstock adjustment - Belt filter system - Coolant system Prodpfjzrinljx Adlsc - Machine light Grinding length 600 mm Grinding width 300 mm Workpiece height 312 mm Table size 600 x 300 mm Maximum workpiece weight 320 kg Distance grinding spindle center - table 490 mm Table travel, longitudinal 700 mm Table travel, transverse 340 mm Table feed rate 1 - 25 m/min Speed range - grinding wheel 1500 rpm Drive power - grinding motor 2.2 kW Grinding wheel dimensions 355 x 25 x 127 mm Magnetic chuck 610 x 305 mm Headstock adjustment device Operating voltage 400 V Total power consumption 3.0 kW Machine weight approx. 1.7 t Space requirement approx. 1.90 x 1.90 x 1.90 m Hydraulic unit 0.60 x 0.35 x 0.75 m Coolant system 0.70 x 0.40 x 0.80 m

Condition: good (used), Grinding wheel, cup wheel, double bench grinder, surface grinder, cylindrical grinder -Inner diameter: 127 mm -Outer diameter: Ø 400 mm Psdpfscnkw Dex Adlorc -Width: 10 mm -Quantity: 1 available -Weight: 2.2 kg

Condition: good (used), Double bench grinder, double grinding machine, pedestal grinder, pedestal grinder -Motor power: 0.37 kW Pedpfeb A Rbgjx Adlorc -Speed: 2900 rpm -Grinding discs: max. Ø 175 mm -Operating voltage: 380 volts -Dimensions: 420/390/H1150 mm -Weight: 65 kg

Condition: new, Year of construction: 2026, functionality: fully functional, Performance Data: Diamond Grinding Spindle: HSK-50 or customer-specific (e.g., SK-40, Perfect Arbor, etc.) Max. Dressing Wheel Diameter: ø300 mm Max. Dressing Wheel Width: 20 mm Max. Grinding Wheel Diameter: up to ø250 mm Grinding Wheel Speed: 0–1,500 rpm (infinitely variable) Travel Range (Left/Right): 135 mm Travel Range (Forward/Back): 135 mm Dressing Wheel Diameter (Silicon Carbide): ø180 x 10 x ø32 mm Swivel Range: approx. 98 degrees on both sides Dressing Wheel Speed: 0–2,800 rpm (infinitely variable) Dressing Wheel Oscillation Frequency: 0–50 strokes/min (infinitely variable) Podpfx Aoha Eh Hsdlerc Dressing Wheel Oscillation Length: 0–50 mm (adjustable) X, Y Axis Optical Scale Resolution: 0.001 mm Capabilities: Dressing of radii and wheel stacks (multi-wheel packs) Power Supply: 380V, 50Hz; Total Power: approx. 1.5 kW DXF Import: Included Camera System: Included (with live transmission via 23" monitor) Software: Latest generation GWDress-Studio with automatic AI measurement included

Condition: good (used), Machine Data Type: ESO 400 Design: Centerless, with regulating and grinding wheel Overhaul: July 2003 (according to the sign) Podpfs Agpflsx Adlsrc Truing: For regulating and grinding wheel Workpiece support: Between regulating wheel and grinding wheel Extraction: Donaldson Torit DCE extraction system, installed Enclosure: Safety cabin with viewing windows Control cabinet: Separate control cabinet Equipment and scope of supply Donaldson Torit DCE extraction system Separate control cabinet Truing devices for regulating and grinding wheel Accessories as shown in the photos Donaldson Torit DCE extraction system, separate control cabinet, and accessories as shown in the photos. Technical specifications are subject to change without notice. Errors and prior sale are reserved. The characteristics and scope of supply agreed upon in the purchase contract shall be binding.

Condition: used, Grinding wheel, cup wheel, bench grinder, surface grinding machine, cylindrical grinding machine -Inside: Ø 127 mm -Outer: Ø 403 mm -Width: 15 mm -Price: per piece Pedpfxjcnkwqs Adlsrc -Number: 1x available -Weight: 3.6 kg

Condition: used, Year of construction: 1992, grinding length 0800 mm grinding width 500 mm workpiece height 400 mm table-size 800 x 400 mm table speeds 1 - 25 m/min cross feed autom. 0 - 60 mm/Hub grinding wheel size 400 x 100 x 127 mm grinding spindle speed 1400/2800 U/min Predjwgnz Aepfx Adljc total power requirement 10 kW voltage 380 V weight of the machine ca. 6 t Machine has cooling arrangement, auto. vert. feed, dressing arrangement and wheel flanges. Control doesn't work continuesly !!

Condition: used, Grinding wheel puller, cup wheel puller, double bench grinder puller, flat grinder puller, cylindrical grinder puller, puller head, dressing head for grinding machines -Support: 150 mm -Number: 1x disc puller available -Price: per piece Predpfx Adjd Ebpceljc -Dimensions: 192/94/H128 mm -Weight: 5.3 kg

Condition: used, Grinding wheel puller, cup wheel puller, double bench grinder puller, flat grinder puller, cylindrical grinder puller, puller head, dressing head for grinding machines -Edition: mm Psdpfx Adedp Npfelerc -Number: 1x disc puller available -Price: per piece -Dimensions: 310/170/H200 mm -Weight: 6.7 kg

Condition: ready for operation (used), Year of construction: 1989, Gear grinding machine NILES ZSTZ 10 H Table diameter: 1000 mm Max. working diameter: 1250 mm Module: - Min.: 2 - Max.: 25 Prsdpfx Ajzk E U Eodlsc Max. helical angle: 45 degrees Max. workpiece weight: 4000 kg Number of teeth: 10-250 mm Dimensions: 7700x4540x3320 mm Machine weight: 30 tons A set of change gears is available. Video of the machine in operation is available!

Condition: good (used), Grinding wheel pullers, cup wheel pullers, double bench grinder pullers, surface grinder pullers, cylindrical grinder pullers, dressing heads, dressing heads for grinding machines Predpfx Adsdpkzwjlsc -Coverage: 255 mm -Quantity: 1x disc puller included Price: per piece -Dimensions: 510/165/H290 mm -Weight: 34 kg

Condition: used, Year of construction: 1986, Technical details: grinding wheel diameter: 200 mm voltage: 380 / 50 V / Hz revolution per minute: 3000 U/min height over floor: 1000 mm current type: 380 V total power requirement: 0,9 (900 Watt) kW weight: 52 kg dimensions L x W x H: ca. 0,4 x 0,56 x 1,2 m Double sanding block mounted on stand Prjdpfou Ngxqjx Adloc currently clamped grinding wheels 2x, Ø 80x x 30mm right and Ø 160 x 30mm left Handrail, movable Grinding guard Holder for cooling water tank *

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS GENERAL DATA Machine type: Cylindrical grinding machine Manufacturer: Heid MSO GRINDING DATA Center height above table: approx. 150 mm Grinding wheel diameter: 250 mm ELECTRICAL DATA Operating voltage: 380 V Control voltage: 22 V Prsdpfx Ao Ad Eq Rodloc Rated current: 35 A MACHINE DETAILS DIMENSIONS AND WEIGHT Length: 2,000 mm Width: 1,800 mm Height: 2,000 mm Weight: 1,000 kg

Condition: good (used), Year of construction: 1984, Used TOS KAMENICEK model BUC63A x 3000 Universal cylindrical grinding machine. YEAR OF MANUFACTURE: 1984. MACHINE FORMERLY INSTALLED AT ROLLS ROYCE PLC IN DERBY UK. IMMEDIATELY FOR SALE AND NOW LOCATED IN BELGUIM WHERE IT CAN BE INSPECTED. SPECIFICATION Max Swing 630 mm Distance between centres 3000 mm Workhead swivel – towards wheelhead only 90 deg. mm Work spindle bored taper No. 6 M.T. Length of stroke of tailstock barrel 70 mm Tailstock barrel taper No. 6 M.T. Spindle nose clamping Din 55021 Swivelling of wheelhead + 30 deg – 10 deg Length of adjustment by re-circulating ball screw 290 mm Additional length of adjustment 250 mm Length of rapid feed 90 mm Length of infeed setting per each rev. of handwheel, measured on work diameter 0.5 mm Grinding wheel dia. X width X bore 750 x 80 x 305 mm Min. dia. of worn grinding wheel 570 mm Max. face width of grinding wheel 125 mm Rate of table traverse – steplessly variable 0.5-0.6 m/min Table traverse per 1 rev of handwheel 8 mm Swivelling of table +/- 5 deg. Max. permissible weight of work between centres 2500 kg Max. permissible weight of workpiece in chuck with overhang. (including weight of chuck) 150 kg Wheel spindle speeds (2) 840,970 rpm Grinding wheel surface speed 33 m/sec Work spindle speeds – int. var. in 2 ranges 8-50, 50-315 rpm Drive – total power required rated 31 kva Psdpeh U Rznsfx Adljrc Output of workhead motor 3 kw Output of wheelhead motor Electrics 15 kw 415V ,3Ph,50Hz Equipped with:- Additional wheel flanges, coolant system with clarifier and splash guards. FEATURES AND EQUIPMENT – Swivel Round Internal Grinding Attachment

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 3021600302, center height: 230 mm, center width: 2,000 mm, grinding diameter: 355 mm, controller model: Siemens 840 D, TECHNICAL DETAILS Center distance: 2,000 mm Center height: 230 mm Grinding diameter: max. 355 mm Z-axis speed: 0.01–15 m/min Z-axis resolution: 0.5 µm X-axis speed: 0.01–10 m/min X-axis resolution: 0.5 µm External grinding wheel, standard, outer diameter × width × bore: 500 × 80 × 203 mm Grinding wheel peripheral speed: 35 m/s Surface grinding wheel, standard, outer diameter × width × bore: 400 × 40 × 127 mm Drive power, external grinding spindle: 9 kW Speed, external grinding spindle, adjustable: 600–1,900 rpm Drive power, internal grinding spindle: 2.2 kW Speed, internal grinding spindle: max. 28,000 rpm Speed, workpiece spindle: 0–500 rpm Taper bore, workpiece spindle: MK 5 Taper bore, tailstock center: MK 5 Cylindricity adjustment: +4′ to −4′ MACHINE DETAILS CNC control: Siemens 840 D Total connected power: 25 kW Operating voltage: 400 V Phases: 3 Mains frequency: 50 Hz Pedpfx Ao Agfzbsdlsrc Total weight: 10,000 kg Operating noise level: 70 dB(A) according to EN 31201

Condition: used, Year of construction: 2001, Cylindrical Grinding Machine Manufacturer: SHIGIYA Model: GPS-30.60 Year of manufacture: 2001 Control system: Fanuc Technical Specifications: - Center height above table: 150 mm - Max. grinding diameter: 300 mm - Center distance: 600 mm - Max. grinding length: 600 mm - Max. workpiece weight: 150 kg Psdpozp Rzbsfx Adlsrc - Grinding wheel angle: 0° - Machine dimensions: 3,100 x 2,520 x 2,100 mm In our assessment, the machine is in good used condition and can be inspected while powered on by appointment. The machine was used for grinding eccentric shafts with a Marposs measurement control system Accessories, tools shown in the photos, and clamping devices are included in the scope of delivery only if noted in the additional information. We reserve the right to make changes and correct errors in the technical data and specifications, and to sell the item to another party in the meantime!

Condition: excellent (used), KELLENBERGER PRECISION UNIVERSAL CYLINDRICAL GRINDING MACHINE TYPE: 600 U YEAR OF MANUFACTURE: 2003 PARTIAL OVERHAUL: 2026 (Technical data see attached documents) Center height: 175 mm (without height adjustment) Grinding length: 600 mm Equipment: - Standard accessories - Internal grinding device for D: 80 mm max. incl. coolant supply through the workpiece spindle - Grinding wheel equipment left for D: 400 x 50 x 127 mm (standard) - Grinding wheel equipment right for D: 300 x 40 x 127 - Grinding wheel flange for wheels D: 400 x 50 x 127 mm (left) and D: 300 x 40 x 127 (right), balancing weights outside (3 pieces left, 2 pieces right) - Variable spindle drive with Danfoss frequency converter - Balancing device for dynamic balancing, type ELASO MANOBALANCE 750/EB 2000 - RENAUD internal grinding spindle type REN 828 (grease-lubricated with compressed air lock) - Various internal grinding mandrels for REN 828 – 1235, 1645, 2060, 2575 (4 pieces) - Various chucks HJNZ 28 for HJN 828 with 2 collets D: 3 mm and D: 6 mm - Tailstock standard MK 5 with adapter flange DIN 55027 size 5” Bore D: 38.2 mm (standard) - Sine bar on the tailstock - Tailstock with manual retraction for quill travel - Micrometer adjustment on the tailstock - Pneumatic relief of the tailstock - FORKARDT planetary three-jaw chuck D: 200 mm - REISHAUER wedge-bar three-jaw chuck D: 160 mm - Permanent magnet chuck D: 200 mm - Collet chuck for Schaublin B32 - Set of 59 collets Schaublin B32, D: 1.0 – 30.0 mm, graduation 0.5 mm - Set of 8 workpiece supports incl. holder - Three-jaw steady rest, 175 mm, foldable, D: 3-120 mm - Swiveling dressing tool for dressing during external, surface or internal grinding - Side and angled dressing tool for side and angled dressing of the grinding wheels - Dial indicator stop for table swiveling with dial indicator 1/100 mm Pedpfx Aszhma Dedlsrc - Dial indicator stop for table longitudinal movement with dial indicator 1/100 mm - Dressing stop for internal grinding - HEIDENHAIN Digital length measuring system for the X and Z axes - STREULI paper band filter SPB 3, 90 l/min at 0.26 bar, tank volume 240 l - WALDMANN machine lamp - Set of vibration-damping pads - Three-color paint finish (light gray RAL 7035/blue RAL 5012/dark gray RAL 7016) - New acceptance test report according to KELLENBERGER standard - CE conformity - Documentation Condition: very good, machine geometrically and mechanically overhauled (see geometry report)

Condition: used, Sandpaper, emery paper, abrasive cloth, sanding discs, grinding wheels -Abrasives: 48 types, 189 pieces in total Prsdpoggtvnefx Adljc -Outer diameter: 40 to 300 mm -Type: 1 photo with type designation/dimensions can be sent per article -Price: complete -Dimensions: 1200/800/H200 mm -Weight total: 202 kg

Condition: used, Sandpaper, emery paper, abrasive cloth, sanding discs, grinding wheels Pedpfx Adjd Srxmsljrc -Fuchs: EKW 46 K/5 KE -Outer diameter: 300 mm -Width: 13 mm -Inside diameter: 100 mm -Price: per piece -Number: 4 pieces -Weight: 1.9 kg

Condition: new, Year of construction: 2026, functionality: fully functional, New, ready for delivery: BUB 50/3000 CNC Control system: Siemens One Digital axis drives Includes extensive application software Includes electronic handwheel for axes X/Z Center height: 400 mm Podjv N D Hbspfx Adlerc Distance between centers: 3000 mm Weight between centers: 500 kg Longitudinal travel of Z-axis: 3250 mm Positioning accuracy X-axis: 0.001 mm Headstock spindle mounting: MK 5 Tailstock mounting: MK 5 Drive power: - Grinding spindle: 11 kW - Workpiece spindle: 2.5 kW - Total installed: 22 kW Machine design with complete enclosure Preparation for dust extraction system included Separate screen, touch probe control, automatic balancing, and gap/crash control included. 1 grinding wheel: 508 x 80 x 203.2 mm Available immediately. Optional filter system in various designs.

Condition: used, Year of construction: 2012, spindle speed (max.): 250 rpm, overall weight: 7,000 kg, Cylindrical grinding machine Manufacturer: JUNKER Type: Jucam 1000 /11S Year of manufacture: 2012 Technical data: - Workpiece diameter: 15–70 mm - Swing diameter: max. 150 mm - Clamping length: max. 500 mm - Swing diameter over steady rest area: 70 mm Workpiece spindle: - Dimensions: 150 x 300 mm - Max. speed: 250 rpm Tailstock: - Longitudinal adjustment: manual via sprocket Tailstock quill: - Fixed center MT 4 (Junker D75 mm) - Clamping pressure Adjustable by hydraulics Grinding table: - Travel path - Z: max. 1,000 mm - Feed Z-axis (CNC-controlled) Grinding spindle I: - Dimensions: D 205 x 450 mm - Flange diameter: D 190 mm - Standard collar: D 127 mm - Drive: 30 kW - Speed control via frequency converter - Max. speed: 4,400 rpm Grinding wheel I: - Type: Borazon (CBN) or Diamond - Diameter: 450 mm - Bore: D 127 mm - Peripheral speed: max. 90 m/sec Steady rest: - Type: GR-3520-NR - Diameter range: D 20 – D 35 mm Dressing spindle: - Dimensions: D 80 x 250 mm - Flange: D 100 - Standard collar: D 75 - Drive: 1.8 kW - Max. speed: 24,000 rpm - Machine weight: approx. 7.0 t Podjx H Andspfx Adlerc 2 identical machines are available. In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are included in the scope of delivery only if noted in the additional information. Subject to technical changes, errors, and prior sale.

Condition: used, Year of construction: 2004, grinding wheel diameter: 660 mm, overall weight: 15,000 kg, Vertical double-disc grinding machine Manufacturer: JUNKER Model: Saturn Year of manufacture: 2004 Control system: Siemens 840D The machines were used for the production of connecting rods. One machine is suitable for rough grinding, and the other for finish grinding. Technical data: - Grinding wheel diameter: 660 mm - Workpiece width: min. 5 / max. 180 mm Prsdpfsxq R Hasx Adloc - Max. workpiece diameter: 200 mm - Machine weight: approx. 15.0 t - Space requirements: approx. L 3.1 x W 4.0 x H 2.7 m In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Subject to technical changes, errors, and prior sale.

Condition: new, Year of construction: 2022, Manual grinding wheel radius profiling device Prsdpfx Aohq Rk Ejdlec