Used Scm Multirip Saw 3/26 for sale (69,588)

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, grinding width: 1,350 mm, SCM Wide Belt Calibration and Fine Sanding Machine Model: dmc sd 60 RCS 135 Technical Specifications: Working width: 1,100 mm Min./max. working height: 4–170 mm Abrasive belt width: 1,120 mm Abrasive belt length: 2,150 mm Main motor power: 11 (15) kW (HP) Lsdpfx Aistwqn Sjijhh Gear motor: 0.45/0.8 (0.6/1.1) kW (HP) Feed speed: 4.5/9 m/min Standard equipment: - R140/85 rubber-coated calibration roller, diameter 140 mm, 85 Shore - 1st position - R160/45 rubber-coated sanding roller, diameter 160 mm, 45 Shore - 2nd position - Hard sanding pad with manual working height adjustment - Motor power for unit 1: 11 kW (15 HP) - Electronic ammeter for main motor indicating current draw - Electronic work height display - Electronically controlled sanding belt oscillation - Rubber pressure rollers - Anti-kickback device at infeed before first unit - 60 Shore rubber feed belt - Roller table with two rollers at infeed and outfeed of working table - Feed belt with two speeds 4.5 / 9 m/min driven by gear motor - Automatic belt centering Including the following special accessories: 1 pc. version "B" for RCS with: pneumatic on/off for roller 1st unit “R” + pneumatic on/off for roller 2nd unit “CS” + “MESAR” elastic segmented sanding pad + pneumatic on/off for sanding pad unit + electronic programming unit “LOGIC 50” + electronic working height adjustment 1 pc. CE safety standards 1 pc. roller table at infeed and outfeed for long workpieces, equipped with 5 non-driven rollers 1 pc. "RA" diagonally grooved steel contact roller, 1st unit 1 pc. main motor 15 kW 1 pc. abrasive belt wear optimizer 1 pc. LED interior lighting 1 pc. door with viewing window on rear side 1 pc. Logic SC control

Condition: like new (used), Year of construction: 2015, For sale is a functional and very well-maintained gas burner, brand WEISHAUPT WM-G20 (2600 kW), with a gas manifold DUNGS DN65. Lhjdezab H Dspfx Aiijh WEISHAUPT WM - G20 (2600 kW) - Output: 350 - 2600 kW - Design: ZM - Year of manufacture: 2015

Condition: used, Year of construction: 1999, Carriage length: 3800 mm Cutting width at the width stop: 1500 mm Cutting width at the cross-cut fence: 3200 mm Cutting depth: 140 mm Scoring unit: no Saw blade height adjustment: electric Swivel adjustment saw blade: electric Width stop adjustment: electric / position control Saw blade angle display: digital Cutting height display: - Width stop display: Digital Cutting ruler display: Scale Lodpfxjvxi Dds Aiiehh Saw blade diameter: 400mm Speeds: 3 Motor power: 7,5kW Motor brake: Yes, automatic Suction connection: 80mm and 120mm Machine length: 3900mm Machine width: 2200mm weight: 1000kg

Condition: excellent (used), Year of construction: 2001, I sell the format sliding table saw with scoring SCM SI 300N, year 2001. Sliding table length 3200mm. Max. cutting width on cross fence 1950 / 2850mm. Max. cutting width on parallel fence 1270mm. Lsdpeiu Awbjfx Aiijhh Motor 5,5 kW. Max. saw blade diameter fi.300x30mm Max. scoring saw blade diameter fi.120x20mm Main blade (scoring blade) 4000 (8000) rpm. Condition very good. Avialable immediately. Please contact for more photos and details.

Condition: good (used), Year of construction: 1997, machine/vehicle number: AB/113309, functionality: fully functional, power: 4 kW (5.44 HP), input voltage: 400 V, input frequency: 50 Hz, cutting height (max.): 95 mm, cutting width (max.): 1,300 mm, saw blade diameter: 300 mm, tilt adjustment saw blade: 45 °, height adjustment type: mechanical, saw blade bore: 30 mm, actuation type: manual, rotational speed (max.): 4,000 rpm, total width: 1,300 mm, overall weight: 750 kg, year of last overhaul: 2025, Equipment: CE marking, saw blade guard, scorer, SCM Si 320 Panel Saw Used machine Serial No. AB/113309, Year of Manufacture 1997 Article Number: JA_G260501 History The machine comes from a vocational school. Due to investment reasons, a new saw was purchased in 2026. The last maintenance was carried out in 2025, during which belts and various small parts were replaced. Description Cutting height 90° max. 95 mm Saw blade max. 300 mm Adjustment manual Scoring saw yes Cutting width 1300 mm Adjustment manual Table length 3200 mm Saw blade swivel 0° - 45° Adjustment manual Angle stop yes Power 400V / 50 Hz 4.0 kW Speed 4000 rpm Weight approx. 750 kg Dust extraction 100 + 80 mm Dimensions LWH 3600 x 2100 x 1400 mm Condition / Work Carried Out Lsdpsy Uurqefx Aiiehh • Machine cleaned • Machine function tested • Age-related and usage-related signs of wear • Available from stock Subject to errors and changes in technical specifications. Note: Used Goods • Prices are quoted as ex-works prices (unless otherwise stated!) from our location in Ottendorf-Okrilla/Germany - free loading! (if not otherwise stated) • Subject to prior sale! • You will receive an invoice with VAT shown. • All items are sold as seen, without any warranty claims. The buyer is free to inspect the items at our location. • Our general terms and conditions apply. • Special agreements are only possible in writing. • Any items in the background of the picture are not included in the scope of delivery. • Saw blades are for illustrative purposes only and are not included in the scope of delivery. Shipping Options: • We will gladly provide you with a transport quote. • Collection from our location in Ottendorf-Okrilla, free of charge by arrangement. • (Optional: Our trained service personnel can assemble the machine at your location and provide a brief instruction. Travel, transport and service times are subject to an additional charge.)

Condition: used, working area 2.600 x 1.250 mm spindle drive 7,5 kW feed max. 38 m/min x-axis 2.700 mm y-axis 1.600 mm Lhedpfxsn A Dwgj Aiioh z-axis 250 mm SCM Routech R 3000 CNC machining center for processing sheet material with automatic feeding (vacuum destacker) and discharge. Video: Upon request Special price for self-disassembly and self-collection.

Condition: used, Year of construction: 2013, functionality: fully functional, operating hours: 515 h, input voltage: 400 V, input current: 74 A, input frequency: 50 Hz, type of input current: three-phase, travel distance X-axis: 5,020 mm, travel distance Y-axis: 1,380 mm, workpiece width (max.): 1,300 mm, workpiece height (max.): 450 mm, workpiece weight (max.): 7,250 kg, number of axes: 4, number of slots in tool magazine: 36, controller manufacturer: SCM, actuation type: electric, total height: 3,000 mm, total length: 9,778 mm, total width: 6,158 mm, overall weight: 7,250 kg, table length: 5,680 mm, table width: 1,300 mm, Equipment: CE marking, documentation/manual, We offer a four-axis machining center, the SCM ACCORD 30 FX. The machine is configured for the production of window and door joinery. It features an additional BRC unit and is equipped with two tool magazines and a good vacuum pump. The machine has been used very little and is practically a new unit, which we can confirm through the SCM Group, from which it was purchased as new. It is possible to obtain a certificate and warranty from the manufacturer, SCM. Brand: SCM Type: Accord 30 FX Model: ACCORD 30 FX Ledpfx Aijy Udznjijhh Serial number: AA2/002707 Year of manufacture: 2013 Weight: 7250 kg If you have any questions or require further information, please send us a message or contact us by phone.

Condition: used, Cart 320cm Lsdpfx Aioy Rrryjishh Tiltable blade slash 380V

Condition: good (used), Year of construction: 1997, functionality: fully functional, planer shaft diameter: 40 mm, Equipment: cabin, 7 Spindle Scm Moulder: Lhsdpfxoyfm Tts Aiijh Max Working width 230mm Max Working height 160mm Feed Speed 5-40 M/min Diameter of spindles Ø40mm Spindle configuration: 1 Bottom 5.5 Kw 2 Right 5.5 Kw 3 Left 5.5 Kw 4 Top 5.5 Kw 5 Bottom 5.5 Kw 6 Top 5.5 Kw 7 Saws/ Bottom 22 Kw Machine comes with some parts and tools incl 4 New 6 knife spindles Ø163x240xØ40 + One full set of tools on the machine.

Condition: reconditioned (used), Year of construction: 2005, through feed moulder with 9 spindles and SCM control 100 PC control system Max. Working width 240 mm Min. Working width 25 mm Max. Working height 120 mm Min. Working height 10 mm Ljdpfx Ajg Umrmeiiohh Min. Work piece length 640 mm feed speed 6 - 36 m/ min, variabel Spindle DM 40 mm Usable length vertical spindles 140 mm Usable length horizontal spindles 250 mm Axial adjustment vertical spindles 0 - 80 mm Axial adjustment horizontal spindles 0 - 45 mm Min and max. Tool DM 100 - 220 mm Min. And Max. Tool DM on planer spindle 120 - 140 mm Profiling capacity of 2. Bottom horizontal spindle with tool DM 200 mm = 15 mm Power feeder motor 5,5 kW DM feeder rollers 140 mm Infekt table length 2500 mm Quick adjustment indeed table and fence 10 mm Required suction capacity 7500 m3/ h Compressed air requirement 6 - 10 bar Weight approx 6000 kg Dimension approx. L x W x H = 6300 x 1620 x 1655 mm Spindle arrangement: Bottom horizontal spindle Motor 11,0 kW Spindle Speed 6000 RPM Right vertical spindle Motor 7,5 kW Spindle Speed 8300 RPM Left vertical Spindle Motor 7,5 kW Spindle Speed 8300 RPM 2. Right vertical spindle Motorleistung 7,5 kW Wellendrehzahl 8300 RPM 2. Left vertical spindle Motor 7,5 kW Spindle Speed 8300 RPM Top horizontal spindle Motor 11,0 kW spindle speed 8300 RPM 2. Bottom horizontal spindle Motor 12,0 kW spindle speed 8300 RPM 2. Top horizontal spindle Motor 11,0 kW spindle speed 8300 U/min 3. Bottom horizontal spindle Motor 7,5 kW spindle speed 8300 U/ min SET - UP quick set up system reduces down times Power Lifting of the feed system and upper spindle units with 100 PC control Pneumatic opening of safety hood full Kardan feed system Feed speed variable Segmented pressure shoe before upper horizontal spindle with parallelogram movement and pneumatic pressure Fine adjustment of outfield table Pneumatic blocking of spindle in working position incl. ZIWO CL 15 automatic feeding unit Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: new, Technische Daten: Abmessungen der Heizplatten 3000 x 1300 mm Anzahl der Heizplatten 2 # Anzahl der Presszylinder 6 # Pressdruck 90 t (900 kN) Zylinderdurchmesser 70 mm Anzahl der Etagen 1 # Etagenöffnung ca. 400 mm Anschlussleistung ca. 21,0 kW ELEKTRISCH BEHEIZBARE TISCHE (ELKOM - Deutschland) Der Tisch besteht aus 2 kalibrierten Aluminiumplatten, in denen die elektrischen Widerstände verlegt sind. Die maximale Betriebstemperatur ist 120 Grad C. Im am Tisch wird eine Dämmplatte montiert, die zur Wärmeisolierung gegenüber der Presse dient. Der Bau des Tisches und die präzise Verarbeitung, die von spezialisierten Firmen vorgenommen werden, gewährleisten eine sehr gleichmäßige Verteilung der Temperatur. Die Heizplatten sind mit speziellen Halterungen an der Presse befestigt um die Wärmeausdehnung zu erlauben, außerdem erleichtern sie die Wartung und das Auswechseln. Spezifischer Betriebsdruck des Tisches bis zu 10 kg/cm2 Max. Temperatur der Heizplatte 120 Grad C Arbeitstemperatur 90 Grad C Schuetzsteuerung Waermeschutzschalter Lhsdpfx Aofh Tmmsiish Die Zylinder sind aus spezial geschweissten und gross dimensionierten Stahlrohren hergestellt. Hydraulik: Kompakte hydraulische Einheit Fabrikat HAWE aus Deutschland. Pumpe fuer Schliessphase und Druckaufbauphase. Automatische Nachdruckverstellung Leistung der hydraulischen Einheit 3 kW Bewegung des Presstisch von unten nach oben. Pressengestell: Das Pressengestell besteht aus einer schweren verwindungssteifen und spannungsfrei geschweissten Stahlkonstruktion. Beide Presstische sind aus HEA-Profilen geschweisst. Die Bearbeitung der Baugruppen erfolgt auf CNC-Barbeitungsmaschinen. Bewegung des Presstisches mit Zahnstangen und Parallelfuehrung an 2 Ecken des Presstisches aus selbstschmierenden Material. BEDIENTAFEL mit Display und Tastatur: Bedientafel Siemens mit 7-Zoll-Farb-Touchscreen mit Verbindung zum Ethernet- Netzwerk für den Fernwartungsservice. Das System ist mit einer eigenen Software ausgestattet durch die die Bedienung der Presse einfach und intuitiv erfolgen kann. Sie können folgende Parameter programmieren, abrufen und ändern: - Automatische Regelung des hydraulischen Drucks aufgrund des Werkstückgrösse und des gewünschten spezifischen Drucks. Das System reguliert den Druck der Zylinder automatisch und der Bediener muss keine Berechnungen mit Grafiken oder Tabellen anstellen. - Möglichkeit zum Speichern von bis zu 100 Arbeitsrezepten (Temperatur, spezifischer Druck, Pressdauer, Plattengrösse). - Direkteinstellung des hydraulischen Drucks der Zylinder mit digitaler Kontrolle aufgrund der Grafik. Dieses System kann alternativ zur automatischen Regulierung verwendet werden, falls Sie lieber mit der herkömmlichen Methode arbeiten. - Elektronische Regelung der Pressdauer - Elektronische Kontrolle der Temperatur der Tische - Automatische Wiederherstellung des Drucks aufgrund des Nachgebens des Materials. - Komplette Diagnostik und Störungsanzeige mit Meldungen am Display. WEITERE AUSSTATTUNG UND MERKMALE DER PRESSE Haken zum Anheben der Maschine um das Laden/ Entladen der Maschine beim Transport zu erleichtern. Nivelliervorrichtungen die an den Füssen der Presse montiert sind. In die Presse integrierte Schalttafel; dadurch sind weniger Aussenkabel notwendig, die vorhandenen sind jedoch auf jeden Fall angemessen geschützt. inkl. Option: Fehlbelegungsüberwachung (Ebenheitskontrolle)

Condition: new, Technical data: Working width mm 1,350 Min./max. working height mm 4 - 170 Sanding belt width/length mm 1,370/2,620 Main motor power kW 18.5 with inverter Feed speed, variable m/min 3.5 - 18 Working units: 1. Unit: "RA" diagonally ribbed contact roller, Sh 86, diameter 160 mm 2. Unit: Combi: rubber-coated sanding roller, diameter 160 mm, 45 Sh Elastic electronic segmented sanding pad "MESAR" with 24 segments Version C: - Elastic electronic segmented sanding pad "MESAR" complete with: - Pneumatic cylinder (on/off) for the automatic raising and lowering of the sanding roller/sanding pad unit - Activation of the sectors via the electronic control system, which synchronizes their engagement with the feed speed and controls the number based on the workpiece geometry, and enables the selection of more or fewer sectors to the left and right of the workpiece. Version 135: Lodpfx Aishtuvrsiehh "MESAR 24" with 24 segments, segment width 55 mm, complete with B/24 workpiece sensing strip at the infeed Additional equipment: Roller table at the infeed and outfeed for long workpieces Perforated table and conveyor belt Vacuum table with electric fan 4 kW (5.5 hp) integrated into the machine frame Oscillating blow-off device, 2nd unit Touch screen 10.4" display with 'eye S software integration' ATTENTION: IMAGES are EXAMPLE IMAGES of a SIMILAR SD70!

Condition: excellent (used), functionality: fully functional, working width: 950 mm, Calibrating/sanding machine "SCM" model SANDYA 3S CODE: CAL-055 USED MACHINE - V380/50 - "CE" ▸Working width: 950 mm ▸1st unit: steel roller ▸2nd combined unit: rubber roller / timed, sectional pneumatic pad Lhjdpfx Ajy Tlxroiish ▸Additional rigid pad ▸Pneumatic exclusion of the rollers from the frame ▸2 conveyor belt speeds ▸Automatic table positioning ▸Roller conveyor with 2 idler rollers at the inlet/outlet ▸Motor power: 7.5 kW

Condition: like new (used), functionality: fully functional, spindle diameter: 30 mm, rip fence adjustment: manual, actuation type: electric, rotational speed (max.): 10,000 rpm, rotational speed (min.): 3,000 rpm, overall weight: 800 kg, Equipment: CE marking, SCM T130 Undercut Spindle Moulder | 7.5 kW | Tilting Spindle! A robust and proven SCM T130 undercut spindle moulder – an industrial-grade machine, ideal for carpentry workshops, production facilities, and demanding users. The equipment is ready for work – precision, power, and ease of operation in one. TECHNICAL SPECIFICATIONS: Motor power: 7.5 kW Control: from the control panel (comfortable operation) Spindle adjustment: electric Total spindle height: 200 mm Spindle diameter: 30 mm Spindle speed: 3000 / 4500 / 7000 / 10000 rpm Speed change: via belt Dust extraction: 2x 120 mm ports Long tables Certificate: CE Why choose this machine? Powerful and stable construction – no vibrations, perfect processing quality Electric spindle adjustment – quick and precise setting changes Wide range of speeds – suitable for various materials and tools Professional machine for intensive use SCM brand – a proven manufacturer in the woodworking industry Machine dimensions: Ledpfx Aijy S Tt Usiohh Length: 260 cm Width: 110 cm Height: 120 cm Weight: 800 kg Where can you see our machines? JBS WOODWORKING MACHINERY Wolica Druga 26 23-310 Modliborzyce Lublin Voivodeship It is possible to test the machine on-site. Financing options available through leasing or installments. We arrange transport. jbsmaszyny.pl tel: 664 335 465

Condition: excellent (used), Bargain in excellent condition: panel saw and spindle moulder with tooling Ljdsy Ni Ayspfx Aiishh

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, planing height: 210 mm, spindle diameter: 30 mm, planing width: 260 mm, working height: 210 mm, total width: 2,350 mm, total height: 900 mm, total length: 1,250 mm, chip removal: 100 mm, SCM MiniMax C260E 5-in-1 combination machine Specifications: • Technical condition – inspected, machine ready for operation • Manufacturer – SCM • Model – MiniMax C 260 E • Planer working width – 260 mm • Thickness planer working height – 210 mm • Planer table length – 1250 mm • Motors with a power of 3 x 1.5 kW • Single-phase machine (230V) – option to convert to 3-phase – additional cost of PLN 2000 • Motor brakes • 3-knife shaft for traditional knives Lhodpfxex Rb Hto Aiijh • Noise-reducing combs • Manual up/down adjustment • Thickness planer spindle speed – 4200 rpm • Router spindle – 30 mm • Max. blade diameter – 250 mm • Circular saw spindle – 30 mm • Saw blade diameter max. 250 mm • Carriage length – 90 cm • Original paint • Set of safety guards • Dust extraction ports – 100 mm • Weight approx. 300 kg • Year of manufacture – 1998 • Overall dimensions 120 x 235 x 90 cm (L x W x H) Additional information: • The presented photos show the actual condition of the item for sale • Possibility to power on and test the machine on site

Condition: used, Year of construction: 2001, total length: 1,700 mm, total width: 1,000 mm, total height: 2,100 mm, Colour: Grey Price: On request Lsdpfxoymlahs Aiiohh - Details: - └ Description: Readout positioning does not work properly. Price AS-IS - Year: 2001 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: AB/143039 - Spindle diameter [mm]: 40 - Table length [mm]: 1195 - Table width [mm]: 350 - Feeding device present: Yes - Guide present: Yes - Tool key included: Yes - Spindle speed: Manual - Voltage [V]: 400 - Current consumption [A]: 12 - Fuse [A]: 20 - Transport dimensions: 1700mm x 1000mm x 2100mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2002, total width: 1,550 mm, total height: 1,500 mm, Colour: Grey Dimensions (LxBxH): 325 x 155 x 150 cm Four-sided moulder SCM Compact 23K Built in 2002 Min/max working height 120mm Min/max working width 230mm Working speed 6/12 m/min Spindle speed 6000 Rpm Ledpewnhk Tofx Aiiohh Spindle diameter 40mm Min/max tool diameter vertical spindle 100/180mm Input table length 2500mm CNC Program Engines 1st Spindle - Under 5.5kW 2nd/3rd Spindle - Left/Right 11kW 4th Spindle - Up 7,5kW Dimensions 3250x1550x1500mm (LxWxH), Weight 1800kg - Year: 2002 - Documentation available: Yes - CE certificate present: No - Transport dimensions: 3250mm x 1550mm x 1500mm (l x w x h) Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: ready for operation (used), Year of construction: 1995, SCM Type Hydro 3200 CE - compliant Sliding table 3200 mm Cutting width to the right of the saw blade 1250 mm Lhsdpfxsy Sv Rpe Aiish Saw blade hydraulic lifting and tilting Tiltable up to 45 degrees Saw blade diameter 400 mm Blade bore 30 mm Motor 380 Volt, 50 Hz 5.5 kW Speeds 3000/4000/5000 rpm Scoring unit Top dust extraction hood Extraction diameter 80/120 mm Space requirements Length 3550 mm Width 2200 mm Height 1500 mm Weight 1000 kg Year of construction 1995 Functionally tested Available from early July Machine from training workshop More photos coming soon

Condition: excellent (used), Year of construction: 2016, Takisawa TMM 250 3 turn-mill center, year 2016, Fanuc turning length:1300 Turning diameter: 350 mm Lhsdpfx Aisrt Ip Njijh Spindle speed (max.): 4000 1/min 9 axes 2 x spindles 2 x C-axis Swing diameter 780 mm Turning diameter max. 350 mm Turning length max. 1,300 mm Chuck diameter left 250 mm Chuck diameter right 200 mm Upper tool carrier with Y-axis 260 mm and B-axis 230° / +/- 115° Complete with 30-position tool changer Lower tool carrier 15-position turret - all positions driven Complete simultaneous 5-axis machining with turning/milling support. Tool changer with 30 tool positions Workpiece magazine, to the right of the machine, with gantry handling Driven tools on the turret. C-axis for left and right spindle Chip conveyor Internal coolant supply through milling spindle 20 bar Due to high office costs (customs regulations) we do not deliver to Turkey Turkey, Iran, Russia and Belarus.

Year of construction: 1980, condition: repair required (used), Planing width: 35 cm Max planing height 21 cm Engine tank for the milling machine! The rest works Machine for review Ljdpfx Ash Tx Aweiishh

Condition: used, Year of construction: 2007, functionality: fully functional, grinding width: 950 mm, grinding height: 170 mm, height adjustment type: electric, type of input current: three-phase, - Italian manufacture - year of manufacture: 2007 - combination sanding shoe TECHNICAL SPECIFICATIONS: - sanding width: 950 mm - sanding height: 4–170 mm - motor power: 11 kW - 1st unit: steel drum with pneumatic engagement - drum diameter: 110 mm - 2nd unit: combination sanding shoe - pneumatic engagement for rubber drum: 78 Shore - shoe with pneumatic adjustment - pneumatic oscillation - air blast for belts Ljdpfx Aiexdxfqjishh - electric height adjustment - two belt speeds: 8.3 m/s and 16 m/s - electronic sanding height positioning - continuously variable feed speed: 4–20 m/min - minimum material length: 500 mm - extraction nozzle diameter: 2 x 140 mm - machine dimensions (L/W/H): 150 x 180 x 210 cm - weight: ~ 1010 kg

Condition: used, Year of construction: 1990, used, in good condition with Tersa cutterblock and infinitely variable feed Make: SCM Model: S63B Year of manufacture: 1990 Machine no.: 47015 GS-certified Motor: 5.5 kW Planing width approx. 630 mm Planing height approx. 3–240 mm Segment pressure beam 2 steel feed rollers Lhedpfx Aioyztzqjieh Feed rate: 18 m/min Number of knives: 4 pcs Knife system: Tersa reversible knives Digital height display Electric fine adjustment of height Extraction port D 160 mm Space requirement approx. 1250 x 800 x 1100 mm Weight approx. 750 kg Location: 97447 Gerolzhofen, freely loaded, unpacked Delivery in current inspected condition, without warranty or guarantee

Condition: reconditioned (used), functionality: fully functional, Refurbished four-sided planer by SCM GROUP. The simple and robust design ensures long-term durability and high performance. The rigid steel machine base guarantees machining accuracy and quality. The machine is intended for larger operations specializing in the production of shaped and straight profiles. Features: - 5 working spindles: bottom, right, left, top, bottom - Automatic central lubrication of the working table Lhsdpfx Aovxtzaeiioh - Material feed speed variator - Inspected machine with half-year warranty - Excellent technical condition - Equipped with tooling Technical data: - Working width (finished profile thickness) min/max: 25 / 230 mm - Working height (finished profile thickness) min/max: 6 / 120 mm - Table length: 2000 mm - 1st spindle (bottom): approx. 5 kW - Right and left spindle: approx. 7 kW - 4th spindle (top): approx. 7 kW - 5th spindle (bottom): approx. 5 kW - Tool speed: 6000 rpm - Stepless feed speed: 4 - 24 m/min - Feed motor: 4 kW - Weight: approx. 3000 kg

Condition: excellent (used), Year of construction: 2006, SCM Z30 CNC Machining Center – Year of Manufacture 2006 – Fully Equipped – On Behalf of Customer Lhedpfeyl Numex Aiijh For sale is an SCM Z30 CNC machining center from the year 2006. The machine is offered on behalf of a customer and was in operation in a carpentry workshop until recently. The SCM Z30 is a proven and robust CNC machine for furniture production and interior fittings, making it ideal for cost-effective manufacturing in everyday use. Technical Data: Manufacturer: SCM Model: Z30 Year of manufacture: 2006 Travel X-axis: approx. 3000 mm Travel Y-axis: approx. 1300 mm Travel Z-axis: approx. 150 mm Working area: approx. 3000 x 1300 mm Unit / Spindle: Main spindle: approx. 7.5 kW Speed: up to 18,000 rpm Equipment: Console table with vacuum system (pod and rail system) Automatic tool changer – fully equipped Integrated drilling unit CNC control (SCM) Rugged industrial build Applications: Furniture manufacturing Interior fitting Panel processing Single-item and series production Condition: Machine was in use until recently Fully functional Special features: Sale on behalf of customer Photos and videos available Inspection possible by arrangement Location: Germany If you are interested, please get in touch – we will be happy to send you further information, photos, and videos. Location: Ostfriesland region