Used Schwimm-Ponton Floating Pontoon for sale (245)

Condition: used, Year of construction: 2022, Maximum parent roll width: 1420 mm Minimum parent roll width: 600 mm Maximum parent roll diameter: 1500 mm Fsdpfx Asyx Uy Aslxjph Maximum parent roll weight: 2500 kg Maximum unwinding tension (Ø1500 mm): 600 N Minimum unwinding tension (Ø1000 mm): 40 N Minimum standard slitting width: 100 mm Maximum rewinding width: 1400 mm Maximum rewinding diameter: 1050 mm Maximum rewinding weight: • Ø76 mm shaft: 600 kg • Ø152 mm shaft: 1000 kg Maximum rewinding tension: 600 N Maximum production speed: 600 m/min Power supply: 3 x 400V 50Hz Installed power: 30 kW Compressed air: 6 bar, dry Materials to be slit: • Paper-based / liner-based packaging laminates. • Board from 80 to 300 g/m². Unwind section: A separate between-centers unwinder, type T9, 1500 mm diameter, including: • Hydraulic cylinder control for lifting parent rolls from the floor. • Two motors driving the unwinding roll, controlled by an ultrasonic diameter sensor and a tension-control dancer roller. • Two pneumatic expanding adapters, SVECOM, for 70/76 mm (3”) cores. • Two pneumatic expanding adapters, SVECOM, for 150/152 mm (6”) cores (mounted on the pneumatic end adapters). • Floating edge-correction roller. • Automatic web guiding system, FIFE DP20, with SE26A photoelectric sensor, ±100 mm correction via electric actuator — for controlling sheet edge or continuous printed line. • Connecting walkway allowing web threading at floor level while keeping full access to the slitting station. • All web path rollers are anodized. • Safety guarding for operator protection. Slitting section: A slitting station with individual pneumatic knives and circular counter-knives: • Shear cut performed against the counter-knives. • Counter-knife shaft driven by an independent motor; counter-knife shaft is pneumatic. • Pneumatic knife holders mounted on a beam with a dovetail guide (TIDLAND) and an air supply manifold for individual activation. • 10 slitting sets, each including: Individual TIDLAND pneumatic knife holder (25 mm width) and double-bevel circular knife Ø 90/60 mm. • Set of multi-groove counter-knife rings, 5 mm pitch, 50 mm length. Web separation section: • A separator roller driven by the slitting motor; angle and curvature fully adjustable. Lay-on roller: • Lay-on roller made of anodized ground aluminum or polyurethane (depending on materials). • Pressure is adjustable and synchronized with winding diameter. • Roller is removable. Automatic splicing / transverse cutting system: • Hydraulically operated pivoting arm including a transverse knife with linear motion and a backing plate for securing the web onto new cores. Trim extraction system: • Trim suction unit with two width-adjustable nozzles. • Turbine enclosed in a sound-insulated cabinet, conveying trim to a centralized system or container (not included). Rewinding section: • Motorized turret (two-position) supporting two rewinding shafts. • Rewinding shaft drive by an oversized asynchronous motor. • Hydraulic centering point for the active rewinding roll. • Two pneumatic expanding shafts Ø76 mm (3”), max load 600 kg each, equipped with full-width rubber strips with individual bladders. • Two pneumatic expanding shafts Ø152 mm (6”), max load 1000 kg each, also equipped with full-width rubber strips with individual bladders.

Condition: ready for operation (used), Etalon Polo Horizontal Length Measuring Device Measuring Bench Gauge External measuring range: 0 ÷ 100 mm Internal measuring range: 5 ÷ 100 mm Measuring span: 50 mm Output device resolution: 0.001 | 0.0001 | 0.00002 mm Error limit 0.5 µm Measuring force, adjustable: 0 ÷ 4 N Support table height adjustment: 18 mm Length: 500 mm Width: 170 mm Height: 170 mm Weight: 41 kg Accessories: Mounting plate with H-shaped recess Fpedpjwcxgzefx Alxeh Mounting block for floating measuring table Control system for lever dial indicators Floating measuring table with tip holder 1 pair of measuring inserts 1 micrometer spindle for testing dial indicators and lever dial indicators Application examples: - Checking plug gauges with a control system - Checking plug gauges and test pins with a floating precision measuring table - Measuring test pins - Checking ring gauges with a mounting system - Checking thread plug gauges with a control system. - Testing dial indicators You are welcome to come by for a viewing. We would be happy to arrange a cost-effective shipping service for you! You will receive a proper invoice. For international customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and view our other offers. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Deviations from technical specifications and errors in the description of the item may occur and are reserved.

Condition: ready for operation (used), Year of construction: 1994, cutting length (max.): 5,800 mm, Panel saw manufactured in 1994. This PANHANS 693 / EURO 30 features a cutting length of 5800 mm and a cutting width of 5150 mm. It includes a rear support table and multiple support beams for enhanced stability. If you are looking to get high-quality cutting capabilities, consider the PANHANS 693 / EURO 30 machine we have for sale. Contact us for further details. • Cutting width: 5150 mm • Rear support table (split): 1 pc, 370 x 4910 mm Fodpfxeyn Nmzs Alxoph • Rear support beams with rollers: 9 pcs, 40 x 4910 mm • Front sliding support table with 3 front guide rollers: 3 pcs, 600 x 1800 mm • Mitre table: movable • Air-cushion mitre table: movable • Angle table: left • Left air-cushion table: up to 2020 mm • Floating collets: 7 pcs • Cutting jaws: 4 pcs Additional equipment • Color screen • Graphics • Online I

Condition: used, For Split Strip Measurements • Automatic cutting table for float glass. • Shape cuts X, Y, C. Shape cutting possible Fjdpsyrpumefx Alxoph • Waste optimization on the cutting table • 4 pneumatically operated tilting arms for glass loading • Year of manufacture: 2017 • Model: PUMA SL • Serial number: 2318 • Dimensions: L 4150 mm, with bridge 4500 mm, W 3500 mm • Price on request

Condition: new, Year of construction: 2026, 1A Gmatick Storage Paternoster (roll rack) The foil storage Paternoster foils is suitable to use for the storage of all 3D-films, it is used as a high storage at the membrane press or as a space-saving storage solution for the 3D foils. With our Paternoster you can storage on very small area approximately 2, 4m x 1, 2m a lot of film rolls (up to 32 rolls of a Ø 300 mm). The required film is thus immediately available at the push of button. Our Paternoster are available from 2.8 m up to 6, 0 m as standard Paternoster. Also special solutions are offered by us, please contact us, we will then find the right solution for your storage. As additional equipment we offer center sleeves, a manual cutting station or the full automatic cutting device and we have also ionization solutions available at Gmatick. • Storage rods ø 42.4 mm • Sleeves inside Ø max. 82 mm,. • Load chain as a hollow pin chain with a breaking load of 100 kN, • Chain pitch is 50 mm hole to hole and this is the raster for the positioning of the mounting foil bars. • Control with a key switch (dead man) for on / off • Rotational speed of the chain is approx. 5.5 m / min • Voltage 400 V, 3N; 50/60 Hz or as USA Version 480V 60Hz • Mains cable with CEKON plug 16A fuse protection (by the customer) 10A slow blow • ground load data at least 2, 2 kg / cm² • Side covering over the entire height of the Paternoster, guards from 2, 2 m above floor to top edge of the Paternoster. • Requirement for the installation of the Paternoster is a viable, flat and solid floor, Fpsdpfjff Huwox Alxoh • Floating floors you can’t install a Paternoster. It is forbidden

Condition: good (used), - Made of AISI 304 stainless steel Features: - Round manhole with handwheel - Level indicator - Tap - Floating cover, air hose, and pump - Gallows - Clear drain ball valve Friedrich No. 2 40 - Residual drain ball valve Friedrich No. 2 40 Fjdpfewff Eiex Alxjph Dimensions: - Ground clearance: 315 mm - Diameter: 1690 mm - Height: 2180 mm

Condition: new, functionality: fully functional, machine/vehicle number: 014322, Year of construction: 2024, load capacity: 4,500 kg, lifting height: 16,400 mm, fuel type: diesel, mast type: telescopic, construction height: 2,530 mm, fork length: 1,200 mm, drive type: Diesel, Rigid telehandler Chassis number: 014322 Mast type: Telescopic Condition: New machine Technical condition: New Description: Find your forklift at STA-TECH! Whether pallet trucks, electric, diesel, or LPG forklifts – we offer affordable, ready-to-use models and new forklifts. STA-TECH is your partner for: ● Purchase and rental of forklifts and warehouse equipment ● Trade-in of used equipment and logistics ● Cross-manufacturer service: repair, maintenance, inspections Features: 3rd hydraulic valve, rear work lights, front work lights, heater, soot particle filter, road approval (StVZO), full cabin, air conditioning, exterior mirrors, windshield wiper, LED lighting, seat Excerpt from special equipment: TÜV/DEKRA road approval 20 km/h (Germany only), automatic 45% limited-slip differential on the second axle, hydraulic single-lever control with proportional and simultaneous control (flow sharing), boom suspension, air-suspended seat, pair of floating forks 120 x 50 mm, axle Fpedpfx Alsymtrljxoh

Condition: used, Year of construction: 2009, Technical details: Fpedpfx Alsv Hrp Eexjh rotor dia: 30-500 mm hobbing length: 500-1000 mm total power requirement: 80 kW weight of the machine ca.: 15 t dimensions of the machine ca.: 3,6 x 2,5 x 3,0 m max. module: 8 Max. module Et milling = 12 Max. module hobbing = 12 Max. axial travel = 110 to 1100mm Max. cutter speed = 300rpm Max. cutter displacement tangential = -350 to -55mm Max. table speed = 100rpm Table drive: torque motor Filter system: chip conveyor is for magnetic materials, belt filter is for all suspended matter that floats in the oil Including milling mandrel *

Condition: used, Year of construction: 2025, operating hours: 2 h, Operating hours: 2 New tractor with dealer daily registration prior to delivery Standard equipment / technical data Engine Rated power (ISO): 82 / 110 kW/hp at 2200 rpm Maximum power: 86 / 115 kW/hp at 2000 rpm Maximum torque: 460 Nm at 1600 rpm Manufacturer / Type: Agco Power / AP 44MBTN-D5 Low-emission engine, 4-cylinder / 4.4 l, 4 valves, STAGE 5 Regulated turbocharger, SCR catalytic converter DOC – Diesel oxidation catalyst SC soot particle filter One-piece, tiltable engine hood Exhaust on right side, in front of cab Fuel tank capacity: 198 liters / AdBlue: 18 liters Transmission / PTO 16/16-Speed Dyna-4, SpeedMatching, 40 km/h PowerControl left-hand operation with powershift reverser, 4-step powershift Permanently cooled wet multi-plate clutches with independent lubrication system Dual-speed PTO: 540 / 540E / 1000 rpm Electronic shift in cab PTO START/STOP button on left rear fender Hydraulics / Rear linkage Open Center system, 58 l/min total flow, max. 200 bar 2 control valves with hydraulic couplers: 1x single/double-acting, pressure relief + 1x single/double-acting, neutral leak, SST Category 3 quick coupler with balls and catcher bowls CAT 3/2 Lower link draft control 5,200 daN maximum lift force, 2 external lift cylinders Adjustable lift rods on both sides and 2 side stabilizers EHR with external operation on both rear fenders Electrical equipment Thermostart, 120 A alternator Electric battery isolation switch 12 Volt power supply for external devices with socket Axles / Additional weights Rear axle ND with flange hub Oil-cooled disc brakes Height-adjustable automatic drawbar Rear fender outer width 2.00 m, without extensions Front weight carrier with integrated drawbar and towing pin Driver's station Standard cab with vibration damping, standard roof, ventilation and heating, air conditioning Integrated safety frame with tinted glass Doors on both sides with safety steps Adjustable steering column (height & tilt) Air-suspended driver's seat with armrests, swivel adapter, and seat belt 2 large telescopic exterior and wide-angle mirrors Interior mirror Analog-digital dashboard (SIS) Radio pre-wiring with antenna and speakers 4 work lights each at the front and rear of the cab roof 2 headlamps each in the engine hood and on the handrails, 2 work lights on rear fenders Rear window washer/wiper All-wheel front axle with selectable differential lock Special equipment With fuel tank protection PowerControl & brake to neutral (clutch effect) 100 l/min Open Center hydraulic system oil flow sharing (58+42 l/min) Leak oil collector at quick couplers 3 control valves: 1x pressure relief, double-acting, float, SST + 1x double-acting, neutral leak, SST + 1x double-acting, neutral leak, SST + free return 2.5 t front linkage, 1 hydraulic hose set, electrical socket 480/70R38 ADJ Ø1.69m & 380/70R28 ADJ Wide rear fender extensions Air conditioning Cab with mechanical suspension Telescopic exterior and wide-angle mirrors Passenger/instructor seat with belt Air-suspended driver's seat, automatic setting with seat belt, swivel adapter, and armrests Fsdpfsyvmq Iex Alxeph Rear window washer/wiper Automatic battery isolation switch, 12

Condition: used, Cut-to-length line Pro-Eco with Cassette Type Precision Leveler 60 x .187 x 50,000Lbs (A3789) Maker: Pro-Eco Excellent conditions SPECIFICATIONS: MAX WIDTH 60" MAX THICKNESS 187" MANUFACTURER - PRO-ECO YEAR - 1985, REINSTALLED 2002 WIDTH RANGE - 8" to 60" GAUGE RANGE - .024" to .187" WEIGHT CAPACITY - 50,000# (25 TON) COIL OD - 36" to 72" COIL ID - 19" to 24" SHEET LENGTH - 24" to 168" SHEET WIDTH - 8" to 62" PACK HEIGHT - 30" (INCLUDING DUNNAGE) PACK WEIGHT - 20,000# LINE DIRECTION - RIGHT to LEFT LINE SPEED - 50 to 300 FPM (VARIABLE) LEVELER TYPE - MECHANICAL WEDGE STYLE w/ TWO CASSETTES LINE COMPONENTS: FOUR ARM ENTRY STORAGE TURNSTILE FLOOR LEVEL COIL LOADING CAR CANTILEVERED MANDREL UNCOILER w/ WATER COOLED BRAKE PIVOTING AND TELESCOPING PEELER BLADE ENTRY PINCH ROLLS ROLLER TYPE SIDE GUIDES ENTRY CROP SHEAR SIDE TRIMMER HYDRAULIC SERVO DRIVE (CURRENTLY NOT OPERATIONAL) MECHANICAL STYLE LEVELER FRAME W/ 200 HP MOTOR CASSETTE #1 - 19 ROLL, 2.50" DIAMETER, 5 HI, 7 BACKUP FLIGHTS CASSETTE #2 - 19 ROLL, 1.75" DIAMETER, 5 HI, 7 BACKUP FLIGHTS STRIP INSPECTION AND CARRY-OVER TABLE w/ NON-MARKING ROLLS LOOPING PIT QUADRANT TABLES w/ NON-MARKING ROLLS ROLLER TYPE STRIP SQUARING TABLE PRECISION ROLL FEEDER W/ 55 HP MOTOR HIGH SPEED MECHANICAL CUT OFF SHEAR W/ 40 HP MOTOR BLANK INSPECTION CONVEYOR w/ NON-MARKING BELT REJECT BELT CONVEYOR w/ NON-MARKING BELT AND SCRAP CART 14 FOOT AIR FLOAT STACKER w/ SQUARING GUIDES AND END STOP 14 FOOT STACKER LIFT CONVEYOR w/ END DISCHARGE ROLLERS 14 FOOT STACKER RUNOUT CONVEYOR w/ END DISCHARGE ROLLERS OPERATOR CONTROL STATIONS UPDATED AC CONTROLS w/ ALLEN BRADLEY "CONTROL LOGIX" PLC (2006) Fpodpfx Ajthg Dislxeh UPDATED DRIVE CONTROLS w/ SIEMENS "SIMOREG" CONTROLLERS (2006) CLOSED LOOP HYDRAULIC SYSTEM CLOSED LOOP WATER COOLING SYSTEM

Condition: used, • Machine No.: 2529 • Year of manufacture: 2021 • Automatic positioning stops for length adjustment • CNC control system with operator guidance via monitor • Integrated cutting plan display • 2 special cutting heads for laminated glass (VSG) cutting • Lower cutting head can be deactivated for float glass cutting • Automatic cutting oil supply for both upper and lower cutting heads • Cutting oil canister with fill level monitoring • Automatic breaking roller for opening the lower cut • Lowerable take-off table for opening the upper cut • Separation device with hold-downs, also suitable for LOW-E coated glasses • Continuous special heating element beneath, swiveling • Thermal-mechanical separation device for dividing multiple interlayers • Cut line marking for diagonal cuts by visible laser • Glass flow direction: right to left • Maximum cutting length VSG: 3700 mm • Maximum glass size: 6100 mm x 3210 mm • VSG glass thickness: 2x3 to 2x8 mm • Interlayer thickness: 0.38 to 3.8 mm • Working height: 940 mm +/- 20 mm • Cutting speed: 90 m/min • Cutting accuracy: +/- 0.5 mm • Length alignment: 25 mm to 3700 mm • Automatic length alignment: min. 230 mm x 800 mm • Operator-side turning device • Price on request Fpodpfx Ajw Uptzolxsh

Condition: new, Year of construction: 2026, tube diameter 10.0 - 60.0 mm Stahl wall strength 3.0 mm Stahl tube diameter 64.0 mm CU/Alu wall strength 4.0 mm revolutions per minute 1.25 - 2.50 U/min bar material - diameter 35.0 mm voltage 400 Volt Control ISITAN NC total power requirement 2.0 kW weight 140 kg range L-W-H 380 x 900 x 600 mm Exhibition machine - like new never been used (!!) Special price upon request - Steel tube capacity: 60.0 x 3.0 mm - Gas tube capacity: 2" Gas x 3.91 mm - Square profile capacity (FE 42) 60 x 30 x 4.0 mm - Max. bending radius: 200 mm - Minimum radius: 2 x D - Hexagonal tool holder - Min. outer diameter: 5 mm - 1/8" Gas Equipment: - ISITAN NC digital control unit * Control panel = touchscreen * 20 sets with 200 programs each - Patented quick tool change system - Continuously adjustable bending speed Fpjdpsxabu Hofx Alxsh - One bending speed - 1 free-floating foot switch - 1 bending tool set included * Additional segments available upon request for an additional charge * ERCOLINA tool holder

Condition: new, functionality: fully functional, Year of construction: 2025, operating hours: 40 h, motor manufacturer: Cummins, Equipment: CE marking, centralized greasing system, front guard, lighting, ENGINE Cummins B 4.5 engine Engine power: 129 kW (173 HP) at 2,200 rpm HYDRAULIC SYSTEM Modern load-sensing system (LUDV) 3 power modes, 3 operation modes, user mode Boost function Attachment setting 3 attachment control modes (shovel/proportional/permanent) Idle automatic Automatic engine shutdown Electronic reversible fan control CENTRAL MONITORING 8" LCD touchscreen display Engine tachometer or daily distance counter/acceleration Slow/fast travel mode Automatic idle Overload warning with alarm SAFETY Safety valve on boom cylinders with overload warning device Safety valve on dipper arm cylinder Safety valve on dozer blade and oscillation lock cylinders Four external mirrors Four front work lights (2 on the boom, 2 on the front frame) Fpodpsyucdgofx Alxeh Travel alarm Automatic swing brake Swing lock Main battery switch OTHER FEATURES Cruise control Speed limiter Creeper mode Heavy counterweight Removable radiator dust screen for cleaning Fuel pre-filter Self-diagnosis system Batteries (2 x 12V x 100 Ah) Fuel filling pump (35 l/min) with auto-stop Single-acting hydraulic circuit (for hydraulic hammer, etc.) Double-acting hydraulic circuit (for grab, etc.) Accumulator for lowering implements Toolbox lower frame - left, right UNDERCARRIAGE Rear blade Fenders (mudguards) Dipper stick 2500 mm Dipper stick safety valves (2pc-boom) Adjustable boom 4710 mm Boom safety valves (2pc-boom) Rear counterweight 2200 kg (adjustable boom) With bucket linkage Upper carriage for adjustable boom Proportional 2-way auxiliary lines for hammer and grab Proportional lines for rotation function Lines for quick coupler Bucket/grab changeover Travel motor with 20 km/h speed stage Base plate adjustable boom/2-way Rear dozer blade Proportional joystick with FNR switch Standard key Boom damping & boom float position Grab pipe front and rear dozer blade Joystick steering Trailer coupling preparation With LED work light on boom Automatic trench brake LED work light at the front of the cab Rear LED work light LED beacon Smoker kit (ashtray + 12V socket) Standard paintwork Cyclone air filter Front and rear fenders Toolbox on both sides Beka central lubrication (adjustable boom) (Europe) Rain protection German road approval Premium seat, heated, ventilated, pneumatic suspension Single flotation tires = 4 x 800/40x26.5 Alliance Trailer coupling ball head + Rockinger Tower elevation 80 mm FOPS cab protection LED work lights LED work light on boom Differential lock 33% front and rear 360° camera with 2nd monitor Full LED package Yellow marker lights Compressor-operated cool box DAB+ radio Fire extinguisher First aid kit Warning triangle Safety vest Return line without back pressure Wheel covers, steel sheet Bucket tilt cylinder with linkage Herder boom extension Herder mowing basket MRZT430

Year of construction: 2008, condition: excellent (used), We offer a KRONEN GEWA 3800V PLUS vegetable washing machine (year 2008, 6.3 kW, 3×400 V) complete with a KRONEN GE 11 air blow-off unit (year 2008, 2.2 kW, 3×400 V, 50 Hz) a professional, continuous washing and dewatering solution for lettuce, vegetables, herbs and fruit. The GEWA 3800V PLUS is a universal washer for pre-washing, washing, disinfecting, mixing and rinsing both cut and whole products such as baby leaf, iceberg, vegetables, herbs and fruit. It uses KRONEN’s HELICAL washing system, where the product travels through the wash tank in a spiral water flow up to ten times the tank length. This ensures thorough yet gentle cleaning, optimal product distribution and significantly reduced water consumption compared to conventional flotation washers. Floating and sinking products are conveyed through the tank by the helical water flow. At the end of the tank, product and water overflow to the vibration outfeed, where the product is sprayed with fresh water and pre-dewatered, while the water is filtered and returned to the pump tank for reuse. A built-in sand trap separates heavy dirt such as sand and small stones at the bottom of the tank, preventing it from returning to the product flow. The machine is built entirely from AISI 304 stainless steel with excellent hygienic design and easy access for cleaning and maintenance. All pipes, pump casing, wash and pump tanks and covers are stainless steel; in the PLUS models with vibration outfeed there are no screws in the product area, which further improves hygiene. The set includes a KRONEN GE 11 air blower (2008, 2.2 kW, 3×400 V, 50 Hz), designed to blow off water from the product surface after washing. Placed after the washer, it improves dewatering, reduces the load on subsequent centrifuges/dryers and enhances shelf life and appearance of the final product. Technical specification KRONEN GEWA 3800V PLUS Manufacturer: KRONEN GmbH Model: GEWA 3800V PLUS (with vibration outfeed) Year of manufacture: 2008 Max. capacity: up to 2,500 kg/h (depending on product and dwell time) Power: approx. 6.3 kW, 3-phase Voltage: 3×400 V, 50 Hz Tank volume: approx. 800 l (GEWA 3800 PLUS series) Material: AISI 304 stainless steel – pipes, pump casing, wash and pump tanks, covers Outfeed: vibration outfeed with fresh water spray and pre-dewatering Function: continuous pre-washing, washing, disinfection, mixing and rinsing of cut and whole lettuce, vegetables, herbs and fruit Washing system: HELICAL spiral washing system with adjustable water flow Features: Sand trap sedimentation unit for heavy particles Reduced water consumption through recirculation and filtration Compact, modular design – easy integration into processing lines Technical specification KRONEN GE 11 air blow-off Model: GE 11 air blower Year of manufacture: 2008 Function: air blow-off / dewatering after washing – removes surface water from product Power: 2.2 kW Voltage: 3×400 V, 50 Hz Fpedpfxjytthmo Alxjh

Condition: new, The AE-400 SERVO edger is designed for longitudinal trimming and slitting of side boards fed to the machine at high speeds (100-400m/minute). The machine works directly with conveyors feeding and receiving boards in automatic mode. The machine is equipped with a board scanner from above and below. The maximum instantaneous efficiency of the edger up to 55 boards/min can be obtained by cutting a 2.5 m board to the same width without changing the spacing of the saw blades. Each adjustment of the edger node devices to the width of the board causes a change in performance. The average productivity of the machine, depending on the work configuration, ranges from 35-48 boards/min. technical dance No. Parameter Value 1. Saw spindle drive motor power. 55 kW 2. The number of revolutions of the saw spindle. 3550 rpm 3. Diameters of used saws. 400mm 4. Maximum cutting height. 50mm 5. Number of saw blades used. 2 to 3 pcs. (2 floating saws) 6. Minimum board length. 2000mm 7. Maximum raw material length. 6200mm 8. Maximum number of boards after cutting 1 board: 2 pcs. 9. Feed: 100- 400m/min Cutting for 1 board - with two saws (2 floating saws): 1. Minimum saw spacing (board width after cutting) 75 mm 2. Maximum spacing of extreme saw blades (board width after cutting) 300 mm Cutting into 2 boards - with three saws (2 floating saws), 1. Spacing the saws on the fixed coupler (board width after cutting) 50-100mm 2. Spacing between floating saws (board width after cutting) 50-100mm 3. Cutting into 2 boards minimum 2 x 50mm 4. Cutting into 2 boards maximum 2 x 100mm Fedonygvrjpfx Alxsph Other machine configurations are possible on request. We also produce other sawmill lines: log sorting plants, board sorting plants, board stackers, conveyors.

Condition: good (used), functionality: fully functional, power: 120 kW (163.15 HP), gearing type: automatic, fuel type: diesel, fuel consumption per hour: 7 l/h, fuel tank capacity: 280 l, color: yellow, empty load weight: 18,000 kg, lifting power: 8,000 kg/m, tire condition: 50 %, drive condition: 100 %, axle configuration: 2 axles, number of seats: 1, first registration: 07/2021, shovel volume: 1 m³, Year of construction: 2021, operating hours: 3,200 h, machine/vehicle number: Serien-Nr.: 14565, Equipment: UVV, additional headlights, adjustable boom, air conditioning, all wheel drive, crane, cruise control, gripper hydraulics, hammer hydraulics, head guard, hydraulics, low noise, onboard computer, standard shovel, trailer coupling, Hydrema MX17 TIER 4 Fully functional! Not a rental machine despite the labeling! Tiltrotator EC219 QS60 with grab + EC Oil - permanently mounted with Q-safe 1x trenching bucket 600mm without teeth, year 2020, Engcon Mounting: S60 1x digging bucket 1000mm without teeth, year 2020, Engcon Mounting: S60 1x grading/profiling bucket 1700mm, year 2020, Engcon Mounting: S60 MX17 Specifications Machine weight (A1)* kg: 18,000 Width over standard tires mm: 2,530 Cabin clearance height mm: 3,120 Tail swing mm: 1,700 Rear swing radius mm: 1,839 Front swing radius (L2.5) mm: 1,990 Digging depth (L2.5) mm: 5,410 Reach (L2.5) mm: 9,320 Breakout force, bucket cylinder (ISO) kN: 126 Tear-out force, dipper arm (ISO) kN: 82 Max. bucket volume m3: 1.00 Dozer blade REAR Tire set: 315/70-R22.5 Dipper arm L.2.5 Return line (low pressure) 1", left Hydraulic option ZV2 (0-100 L), joystick steering via wheel Grab circuit, operation of bucket cylinder Z1 can be controlled from the cab SVAB L8 joystick, wiring for tiltrotator Float position for boom cylinder Z3 2 additional hose rupture valves LED work lights - 6 units FOPS stone guard for cab, roof grille Extra camera on counterweight Extra camera on engine hood - special monitor with split-screen DAB radio with Bluetooth including antenna Driver's seat with ventilation Central lubrication point for dozer blade, 1 lubrication point Automatic central lubrication with 2 lt. container (item 100 included) Electric fuel tank filling pump Accessories: Fpsdpfx Ajwx Hiislxjh Tiltrotator EC219 QS60 with grab + EC Oil - permanently mounted with Q-safe 1x trenching bucket 600mm without teeth, year 2020, Engcon Mounting: S60 1x digging bucket 1000mm without teeth, year 2020, Engcon Mounting: S60 1x grading/profiling bucket 1700mm, year 2020, Engcon Mounting: S60 Machine: HYDREMA Mobile Excavator MX17-RB15 Serial no.: 14565 Financing available! Additional attachments such as screening bucket, grading beam, etc. available! Machine still in operation! Subject to prior sale and errors! Sale to businesses only!

Condition: used, functionality: fully functional, power: 120 kW (163.15 HP), gearing type: automatic, fuel type: diesel, fuel consumption per hour: 8 l/h, fuel tank capacity: 280 l, color: yellow, empty load weight: 18,000 kg, lifting power: 8,000 kg/m, tire condition: 50 %, axle configuration: 2 axles, first registration: 07/2017, shovel volume: 1 m³, Year of construction: 2017, operating hours: 4,800 h, machine/vehicle number: 12339, Equipment: UVV, additional headlights, adjustable boom, air conditioning, all wheel drive, cruise control, gripper hydraulics, hammer hydraulics, head guard, hydraulics, standard shovel, traction control, trailer coupling, Hydrema MX16 TIER 4 Fully functional! Not a rental machine despite the label! Tiltrotator Rototilt R5 incl. gripper Oilquick OQ 60-5 quick coupler Stone and sorting grapple with Oilquick Engcon joystick iDig 2D control system, wireless 1x grading/profile bucket 1700mm, year 2020, Engcon Mounting: OQ 60-5 MX16 Specifications Machine weight (A1)* kg: 18,000 Width over standard tires: mm 2,530 Rear overhang: mm 1,700 Swing radius, rear: mm 1,839 Swing radius, front (L2.5): mm 1,990 Digging depth (L2.5): mm 5,410 Reach (L2.5): mm 9,320 Breakout force, bucket cylinder (ISO): kN 126 Tear-out force, dipper stick (ISO): kN 82 Max. bucket volume: m3 1.00 Rear dozer blade + trailer coupling with power outlet Wheel set: 315/70-R22.5 Dipper stick L.2.5 Low-pressure return line 1", left Hydraulic option ZV2 (0-100 L), joystick steering via roller Grapple circuit, bucket cylinder control Z1 can be switched from the cab SVAB L8 joystick, wiring for tiltrotator Floating position for boom cylinder Z3 2 additional hose rupture valves LED work lights – 6 units FOPS stone guard for cab, roof grid Additional camera on counterweight Additional camera on engine hood – special monitor with split-screen DAB radio with Bluetooth and antenna Driver's seat with ventilation Central lubrication point for dozer blade, 1 lubrication point Automatic central lubrication system with 2 litre tank (item 100 included) Electric fuel pump for fuel tank Accessories: RB15-MX16 Serial No. 12339 Financing available! Additional attachments such as screening bucket, grading beam, etc. available! Fpjdpfxewx Id Io Alxjh Machine still in use! Errors and prior sale excepted! Sale exclusively to commercial operators!

Condition: used, Year of construction: 2008, machine/vehicle number: M301, Used CFT Oil Filling Monoblock – Comaco 6000 bph – Overview This second-hand CFT–COMACO RVAR 6/10 + TA/3 is a volumetric piston filling and press-on capping monoblock engineered for edible oil. Built in 2008 and currently in production, it is a proven asset for industrial packaging environments looking to expand or upgrade a used bottling line. We can sell it as-is (see and like) or with revamping and preventive maintenance operations to prepare the monoblock for production. Revamping & Preventive Maintenance Activities If required, the following revamping activities can be carried out to ensure reliability and readiness for production: Assembly of machine parts at KBB workshop General machine cleaning General lubrication (greasing, oil level check and possible replacement) Inspection of rubber parts (belts and gaskets) with replacement if necessary Machine start-up: check of circuit integrity and correct functioning in manual/automatic modes Verification of format change equipment availability and integrity Technical Specifications & Performance Data Filler – CFT/COMACO RVAR 6/10 (volumetric) Product: Edible oil (filling temperature 10–30 °C) Filling system: 6 volumetric dosing groups (cylinders & pistons, plug valves), out-of-neck filling; max dose 10,500 cc Nozzles: 6 + 6 + 6 patented nozzles dedicated to edible oils Accuracy: 1σ = 0.6 g Mechanical data: filler pitch 377 mm; pitch circle diameter 720 mm; max container diagonal 220 mm; max height 460 mm Construction: painted steel base fully clad in AISI 304 stainless steel; AISI 304 product hopper with convex bottom and float level control Capper – TA/3 (press-on) 3 capping heads with PP320 press-on heads and positive pick (vacuum-assisted) Rated capacity: up to 6000 cph for PET press-on caps Pitch circle diameter 360 mm; machine pitch 377 mm Pick & place cap transfer; hardened steel cam for head pistons Automatic electric turret height adjustment; centralized lubrication shared with filler Two cap elevators, each with 300 L covered hopper, cleated belts, and low-level control; mobile stainless steel frames on wheels Formats, closures and indicative speeds PET: 1 L (Ø20), 2 L (Ø28), 3 L (Ø40), 5 L (Ø40), 10 L (Ø40) Tinplate: 1 L (Ø32), 3 L (Ø32), 3 L/Gallon/5 L (Ø32) Press-on caps: 31/17 (1 L PET), 38/24 (2 L PET), 51/24 (3–5–10 L PET); flex-spout common to all tinplate formats Approx. filler outputs: up to 3500 bph (1 L PET Ø20), 3000 bph (2 L PET Ø28), 2500 bph (3 L tinplate Ø32), 2500 bph (5 L PET Ø40), 2200 bph (5 L tinplate Ø32), 1100 bph (10 L PET Ø40) Fjdpfx Aeyhbtgslxoph Advanced Automation & Control Systems Siemens PLC: SIEMENS S7 E300 with operator controls for automatic and manual modes; inverter-driven main motion with increased power to drive the capper via gears Automatic turret height adjustment (filler and capper) Micrometric volume adjustment via cam reducer; adjustable even during machine motion Volume compensation versus product temperature (automatic correction for ±2 °C delta) Per-doser volume fine correction NO CAN–NO FILL device prevents valve opening without a container

Year of construction: 2021, condition: excellent (used), machine/vehicle number: 2108-2592, Holaras AS-10 knive topper for onions with 2 knives This 2 blade onion topper is specially designed for cutting of the tops of the onions or bulbs. By this knife topper the tails of the onions are not deducted, but they are cut by the rotory knives. Special vibrators with a targeted number of vibrations put the sieves with the onions on top in motion. Due to the high rotational speed and the special shape of the blades, a strong air is created. This air current sucks the tails through the sieves and cuts off just below the sieve. With extra knive, sieve and motors - Selfmade housing, which makes the machine a closed topper Fpedjx Hu Enopfx Alxsh - Space between the bars of the sieves: 30 and 20 mm - Capacity 5 - 10 ton / hour When using the Holaras topping machines, the haulm is not pulled off, but cut of by fast rotating blades. This avoids damage because the blades do not touch the onions. The number of directed vibrations transmitted by specially designed vibrator-motors on the vibration-sieves is such that the onions move in a floating motion over the vibrationnsieves. The haulm (tops) is drawn through the openings into the sieves by a heavy airstream, downward, and then cut by the blades. The vibrator-sieves are easy to change. The vibrator-sieves are available for almost all types and sizes of onions and shallots. Seed onions, picklers, medium and ware-onions, shallots, are topped without difficulty by the Holaras topper without being damaged. It is important to use a sieve which is suitable for each kind of onion.

Condition: excellent (used), Edging line edger with optimization PAUL AB920 - in a warehouse Fedpeia Nypofx Alxsph - German production - DTR - optimization of the cutting width - cross cut saw - automatic disc spacing TECHNICAL PARAMETERS: - max. workpiece width 920 mm - max. workpiece height 90 mm - max. workpiece length 6000 mm - main engine power 37 kW - disc diameter max. 300 mm - spindle diameter 60 mm - sleeve diameter 70 mm - fixed sleeve 60 mm long - floating sleeve for 1 disc - floating sleeve with a spindle 100 mm long - number of measuring heads 15 - spacing of measuring heads 350 mm - distance between the measuring heads - total feeder power 10 kW - cross-cut saw for cutting the material to a length of 2630 mm - saw leveling the material - cascade for transporting the board - hydraulic feed with smooth speed regulation - hydraulic material pressure - hydraulic material height adjustment

Condition: new, Year of construction: 2026, Three-phase 400V motor with frequency converter (kW) 3 Saw blade dimensions (mm) 5200 x 34 x 1.1 Flywheel diameter (mm) 480 Cutting speed (m/min) 20 – 120 Clamping width (mm) 610 Working height (mm) 780 Machine dimensions without packaging (mm) 2780 x 1440 x 1560 Weight (kg) 800 Standard features Ergonomically designed, robust welded frame construction for miter cuts from 0° to 60° right/left Sturdy, low-vibration frame construction with arm joint mounted on plain bearings Clearly arranged control panel on the operator side Simple, easy-to-understand controls Precisely ground carbide saw blade guides (adjustable) for maximum cutting performance Cutting Accuracy Requirements Synchronously driven chip removal brush Semi-automatic sawing cycle: fully hydraulic Cutting feed: hydraulic including automatic cutting pressure regulation Miter adjustment and clamping (manual) Hydraulic full-stroke cylinder for vise (pull-down version) Floating vise Blade tension and saw blade breakage monitoring Easily removable chip collection trays Hydraulic blade tension indicator Integrated coolant supply (30 l tank capacity) LED work light Digital miter indicator Including saw blade with 3/4 combi-toothing Machine color: - Saw frame RAL 7035 - Machine body RAL 7005 12-month warranty for single-shift operation Please inquire about additional accessories. Fpsdpeukgiqsfx Alxsh DELIVERY: FREE DOOR (within Germany) NOT THE RIGHT MACHINE? WE ARE A FLOTT SUPPORT POINT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!

Condition: like new (used), HEMA monoblock filler with ZALKIN capper for PET bottles. This type of machine is suitable for dosing the following products: mustard, baby food, sauces, pastes, jams, etc., whether containing particulates or not. These machines are equipped with filling devices specifically designed for dosing viscous products. The HEMA filler operates in two key phases: suction and filling. These phases alternate continuously to ensure fast and accurate filling. The ZALKIN capping machine is engineered for placing and sealing aluminum screw caps—deformable or non-deformable (for carbonated or non-carbonated beverages)—as well as screwing aluminum or plastic caps, or applying snap-on or floating closures. The system is compatible with bottles made of glass, plastic, or metal, in various shapes. Output varies according to product type, container format, and fill volume, with a maximum output of up to 6,000 bottles per hour (120 bottles/min). Includes: - Cap feeder - Infeed conveyors - Discharge belts - Control panel - Automatic CIP cleaning system Fedpfxsynkdze Alxsph - Cylindrical filling valves - Heated-jacket pistons - Adjustable volume control for container size and filling capacity - Steam sweeping in the capper with vacuum closure - Schneider automatic touchscreen interface - Elevating bottle carrier

Condition: new, functionality: fully functional, Year of construction: 2022, working width: 5,000 mm, Boom mower for tractors with a power output from 33 kW (45 hp), category II three-point linkage, and a minimum weight of 2,100 kg. Driven via a PTO shaft with 540 rpm. - Maximum horizontal reach: 5.00 m - Independent hydraulic system (46 l/min, 210 bar) - Drive shaft - Hydraulic collision protection - Hydraulic swing arm - Float position for swing arm - Float position for mowing rotor - Stabilization kit for three-point linkage - Bowden cable control Fedpfxjxlf Hws Alxsph Flail rotor 1000 - Central mounting - Direct drive - Working width: 1.00 m - Weight approx. 140 kg

Condition: new, For inquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone at ). Seppi M. H-SMO-B 125 Mulcher / NEW / in stock & immediately available Price: €11,790.00 net / €14,030.10 gross Working width: 125 cm Overall width: 140 cm Depth: 120 cm Height: 60 cm Weight: 380 kg Support roller: 152 mm V-belts: 4 - Powerful and manoeuvrable attachment suitable for excavators or crawler vehicles, ideal for maintaining embankments and fallow land - Mulches grass and light brush up to 7 cm diameter - Suitable for excavators from 5 to 13 tons - Designed for mounting on various adapter plates - Drive designed for hydraulic motor according to the carrier unit's oil flow - Indirect belt drive with 4 V-belts - Drop-forged counter blades - Double-skinned housing made from high-tensile steel - Adjustable discharge hood with rear rubber guard - Reinforced support roller with double taper roller bearings, height-adjustable by 5 cm - Rotor wall thickness: 12.5 mm - Front protection with chains - Colour: red RAL3020 · anthracite RAL7021 OPT 371 Rotor with SMO flails (standard) - 12 pieces, part no. 130.02.001 OPT 291 VARIO FLOW - Axial piston hydraulic motor with variable displacement 29-58 cm³ and pressure relief valve - Displacement in cm³ (min-max): 29 - 58 - Required hydraulic pressure in bar (min-max): 150 - 250 - Required hydraulic oil flow in l/min (min-max): 60 - 120 OPT 099 Floating mounting (parallel linkage) Optional: MS08 adapter plate incl. bolts and installation = €750.00 net Three hydraulic connections required: pressure, return, and drain. Unit delivered without hoses or couplings. Many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc...) in stock and immediately available. We have a very large selection of various Seppi M. products available for immediate delivery in our warehouse! Simply contact us at / . Finance options available upon request. We are an official Seppi M. sales and service partner. We are an official Magni telescopic handler sales and service partner. We are an official DMS sales and service partner. We are an official Westtech sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. We are an official Holp sales and service partner. We are an official OilQuick sales and service partner. With 800 used commercial vehicles in stock, we are also one of the largest commercial vehicle dealers in Germany. We can supply the full range of Seppi M. products! Errors and prior sale excepted! = Further Information = Fjdpfx Aleymi Ensxjph Please contact Marius Herden for further details.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, DIP-TECH AR 6000 (2013) + Integrated Drying Module Technical specifications: • Max glass size: 3000 × 6000 mm • Min. glass size: 500 × 500 mm • Glass thickness: approx. 4–19 mm • Printing technology: Digital ceramic ink printing directly on glass • Drying module: Integrated dryer included • Ink type: Ceramic inks – tempering compatible • Printing technology: Digital ceramic in-glass printing • Application: Architectural & interior glass • Glass types: Float, tempered, laminated Key Advantages ✔ Large-format industrial printer (6-meter capability) Fpedpfxeymb Tqs Alxeh ✔ Integrated drying module – faster production cycle ✔ Improved ink stabilization before tempering ✔ Reduced print defects and handling risks ✔ Suitable for façade, architectural and interior glass ✔ Machine in production – ready for immediate operation Inspection possible under power.