Used Rhtc Bending Machine Horizontal for sale (66,043)

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, * Mori Seiki NMV 5000 DCG. * Year: 2008. * Equipment value, including zero points, chucks, BT taper chucks, turning tool chucks, and pallets: 50,000–55,000 euros. * 5-axis continuous machining center. * High-precision Heidenhain linear guides. * Interface for connecting a pallet loader and robot. * Table with turning function. * Independent high-pressure cooling system at 40 bar. * Spindle oil cooling system. * BT 40 tool magazine. * Magazine capacity: 60 tools. * Maximum tool diameter: 125 mm. * Maximum tool length: 300 mm. * Maximum tool weight: 8 kg. * Travel on the X-axis: 730 mm. * Travel on the Y-axis: 510 mm. * Travel on the Z-axis: 510 mm. * Table with turning function. * Maximum workpiece diameter in turning mode: 450 mm. * Maximum turning diameter in turning mode: 700 mm. * Mori Seiki Mapps 4 conversational control. * Spindle speed: 20,000 rpm. * Spindle motor power: 18.5 / 15 kW. * Maximum cutting torque: 135 Nm. * C-axis table: 360,000 x 0.001 * B-axis rotation: +160 / -180 Iodpjzlahcefx Aa Esid * Rapid traverse X/Y/Z: 50 / 50 / 50 m/min * Renishaw tool measurement system. * Renishaw workpiece measurement system. * Automatic zero-point adjustment. * Automatic cutting power control. * Program memory: 2 MB. * Dynamic zero-point correction (up to 8 points). * Pre-check of tool availability. * Custom macro (999 variables). * Rear chip conveyor. * Tool life management (128 x 2 groups). * Electrical transformer. * Documentation, parts list, electrical diagrams, programming, and instruction manual. * Weight: 13,500 kg. * Machine is currently in operation. * Available for inspection by an authorized Mori Seiki technician. * Immediate delivery, subject to immediate sale.

Condition: used, Year of construction: 2007, operating hours: 13,400 h, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 775 mm, travel distance Z-axis: 450 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, feed length X-axis: 450 mm, feed length Y-axis: 500 mm, feed length Z-axis: 450 mm, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, nominal power (apparent): 72 kVA, torque: 65 Nm, controller manufacturer: Indramat, controller model: MTC 200, total height: 3,000 mm, total length: 6,000 mm, total width: 5,500 mm, table width: 700 mm, table length: 1,100 mm, spindle speed (max.): 16,000 rpm, operating hours of spindle: 13,400 h, coolant supply: 70 bar, distance between spindles: 450 mm, spindle motor power: 28,000 W, number of spindles: 2, number of slots in tool magazine: 100, mount diameter: 63 mm, tool length: 320 mm, tool diameter: 160 mm, tool weight: 8 g, input voltage: 380 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, This machine is offered for sale as part of a package that includes two other machines of the same type and with similar operating hours. The advertised price is for the purchase of all three machines, plus a large spare parts package (including two reconditioned spindles), as well as an additional, fourth machine, which the buyer will receive free of charge. The machines can be inspected under power at any time by appointment. Iedpfx Aaozk U Hwo Ejid

Condition: good (used), Year of construction: 1997, functionality: fully functional, For focaccia, rolls, baguettes, and cake bases. Top and bottom belts are new; the knife has been newly sharpened by Krumbein themselves. Belt width: 40 cm. Machine length: 80 cm. Minimum cutting height: 5-7 millimeters. Speed adjustable. Pick-up only. Iisdpszcf A Isfx Aa Eod

Condition: used, Year of construction: 2008, x-travel 1000 mm y-travel 1000 mm z-travel 1000 mm Control Siemens 840D powerline spindle tunring speed 8.000 U/min drive capacity - main spindle 100/40% ED 32/44 kW tool taper HSK-A 100 number of tool places 354 Pos. rapid traverse ( x / y / z ) 60 m/min size of pallet 800 x 800 mm In our opinion, the machine is in good used condition and can be inspected under power by appointment. Technical Features: - NC rotary table with pallet carrier - Rotary pallet changer - 40 bar internal coolant supply - Rotating viewing window - Wall-mounted magazine with 300 magazine positions - Rotating wall tool lock, 30 positions (inactive) and 54 positions (active) - Infrared measuring probe Ijdpfx Aasxcp R Us Eeid - SK 50 mechanical tool breakage detector - Tool identification - 4-color signal lamp Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: good (used), Year of construction: 2017, Horizontal machining center Machine type: DMG MORI NHX 5000 Control: M730UM mit Celos Iedpfxozinbxo Aa Ejid Year: 2017 SPECIFICATIONS Travel X-Axis: 730 mm Y-Axis: 730 mm Z-Axis: 880 mm Rapid motion: (X/Y/Z): 60 m/min. Feed: (X/Y/Z): 60 m/min. Spindle speeds: 15.000 rpm Spindle motor: 37 kW Torque: 250 Nm Toolchanger Tool: HSK 63 Tool capacity: 60 Work piece diameter: 70 / 140 mm Tool lenght: 550 mm Tool weight: 12 kg Palett system Amount of paletts: 2 Palett size: 500 x 500 mm B-Axes: 0,001° Max. Table Load: 500 kg Equipment Chip conveyor Filtration system: Knoll KF 110/700 Internal cooling: 70 bar

Condition: good (used), Year of construction: 2007, functionality: fully functional, CNC Precision Surface Grinding Machine Grinding area: 600 x 400 x 375 mm Grinding spindle motor: 3.7 kW Table drive: hydraulic Cross-axis drive: electromechanical Grinding wheel: 300 x 50 x 76.2 mm Peripheral speed: 10 - 32 m/s Electromagnetic plate: 600 x 400 mm with holding force control and automatic magnetic pole reversal for demagnetizing Features: Partially enclosed, open-topped loading compartment with a sliding door Cleaning kit for cleaning the work area with hand-held impulse nozzle Holder for prism arm with single-point diamond, MK 0 Grinding spindle speed control with V-constant controller Universal paper filter unit UPF 100, tank capacity approx. 280 liters Coolant pump: 20 liters/minute at 1.5 bar Machine light Without grinding wheels and flanges. Iiedpfsziligjx Aa Esd

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Technical details grinding length 600 mm grinding width 300 mm workpiece height - mm total power requirement 7 kW weight of the machine ca. 2,7 t dimensions of the machine ca. 2800x2200x1890 mm Additional information Horizontal surface grinder in excellent condition The machine has been in operation for only a few hours. Work area • Travelling distance X-axis: 765 mm • Travelling distance Y-axis: 340 mm • Table dimensions: 300 x 630 mm • Scale ring division Y-axis: 0.02 mm • Scale ring division Z-axis: 0.005 mm • Autom. transverse infeed: 0.1-8 mm • Autom. vertical infeed: 0.005-0.05 mm Drive unit ratings • Motor rating main drive: 5.5 kW • Motor rating servo-drive: 0.5 kW Dimensions and weights • Total weight: 2,700 kg • Dimensions: 800 x 2200 x 1890 mm • Grinding wheel dimensions: 350 x 40 x 127 mm Accessories: 2-axis position display Knuth Xpos 3.1 Grinding wheel, Grinding wheel flange, Balancing arbor, Balancing stand, Halogen work light, Magnetic chuck 600 x 300 mm Leveling screws, Iiodpfjzild Rsx Aa Ejd Operating tools,

Condition: excellent (used), Year of construction: 1989, functionality: fully functional, pressing force: 30 t, We offer this very good Bihler GRM 80 punching and bending machine, year of construction 1989. with 5 slides, 30T press, straightener, feeder Iiedpfxeywty Es Aa Ejd with decoiler Tooling is not included If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Year of construction: 2009, operating hours: 51,040 h, functionality: fully functional, overall weight: 12,400 kg, total length: 2,650 mm, total height: 3,150 mm, total width: 4,550 mm, stroke length: 350 mm, type of input current: three-phase, pressing force: 170 t, input voltage: 400 V, We are offering this used Amada HFP NT 170-3L bending machine, manufactured in 2009. Maximum pressing force: 1700 kN Maximum stroke: 350 mm Weight: 12400 kg Sound pressure level: 75 dB(A) Voltage: 400/415 V Frequency: 50 Hz Number of phases: 3 Installed power: 16.5 kW Rated current: 28.6 A Date of manufacture: 03/2009 Serial number: HFP NT 170-3L B090020 Iodjzk Dinepfx Aa Eeid If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: like new (used), Year of construction: 2022, Semi-automatic tube bending machine for tubes up to 30 mm with extended bending clearance, especially for meander bending Iodpfxszichao Aa Ejid Standard equipment: • Operation via Siemens Touch Panel KTP 600 • Function keys and plain text display for operator guidance • Program memory internally for 100 programs with 20 data sets each • Bending axis electronically controlled • Automatic bending angle adjustment • Target/actual value display for bending angle • Control panel swiveling • Bending head freestanding • Tube clamping hydraulically, clamping pressure adjustable • Guide block adjustment hydraulically • Bending mandrel extension hydraulically • Machine can be used in a mobile manner • Extended bending clearance for bending radii up to R max = 200 mm 1 TUBOBEND 30 with tube feed length 1,500 mm Technical data: Tube range up to: 30.0 x 3.0 mm (E 235 with Rm = 2xD) Bending radius up to: 200 mm Control: electronic Effective bending angle (max.): 180° (+10° overbending) Switch-off accuracy: ± 0.1° Bending speed (max.): 45°/s Dimensions L/W/H: 2200 / 600 / 1100 mm Weight: approx. 500 kg Power: 1.5 kW Connection data: 400 V / 50 Hz / 3 phases Mains fuse: CEE 16 A Color: RAL 5015 blue Optional equipment 1 piece. Length stop device, length 1500 mm 1 piece. Early mandrel retraction to optimize arc quality • For use with ball mandrels • Mandrel is automatically retracted during the bending process • Adjustment up to 10° continuously programmable 1 piece. Automatic mandrel lubrication as a minimum quantity lubrication system Pneumatic dosing device HP-Microspray (compressed air connection required) 1 piece. Safety foot switch for clamping and bending function 1 piece. Adjustable bending speed Note/Remark: The tube is approximately 500 mm round at the beginning and end of the bend (tube and tool = Ø 33.7 mm). The tube is only flattened into a flat oval tube in the spiral. The spiral only has one bend at each end. Bending of return bends is not possible. Since the tube is round, a pre-rotation can be performed to compensate for the slope. The position of the bend or the spiral must be determined using an external device.

Condition: excellent (used), Schröder ASK segmented folding machine The machine is equipped with: ✅ a foot pedal for single-operator control ✅ segments in the upper beam, lower beam, and bending beam ✅ segment height of the upper beam: 11 cm ✅ bending capacity: 1 mm steel sheet Iodjy Dz Sispfx Aa Ejid Condition: • with new dampers in the upper and bending beams • very good technical condition • very good visual condition • Immediately available, no lead time • Weight: approx. 500 kg Inspection and test run possible by appointment.

Condition: ready for operation (used), Year of construction: 2006, - USED - No 2 4-AXIS HORIZONTAL MACHINING CENTRES WITH 24 POSITIONS PALLET-SYSTEM X-AXIS TRAVEL: 730 mm Y-AXIS TRAVEL: 730 mm Z-AXIS TRAVEL: 850 mm DISTANCE SPINDLE NOSE-TABLE: 100 - 830 mm RAPID FEEDS X-Y-Z: 50 m/min SPINDLE: 8000 rpm; 22-30 kW; ISO 50 - BT PALLET: CONTINUOUS ; 500x500 mm MAX ADMITTED LOAD: 500 Kg MAX MACHINABLE PIECE DIMENSIONS: ø 800 x 1000 mm HIGH PRESSURE COOLANT: 80 Bar Iijdjzh Rmzopfx Aa Esd TOOL MAGAZINE: CHAIN-TYPE ; 240 + 240 POS MAX TOOL DIAMETER: 125 (300) mm MAX TOOL LENGHT: 500 mm MAX TOOL WEIGHT: 30 Kg CONTROL UNIT: MSX 701 III ACCESSORIES: SWARF CONVEYOR ; TOOL SETTER ; TOUCH PROBE ; PORTABLE HANDWHEEL NOTE: LPP LINEAR MULTI-PALLET SYSTEM WITH No 24 PALLET AND No 2 LOADING AND UNLOADING STATIONS

Condition: good (used), Year of construction: 2009, Horizontal machining center Machine type: DMG DMC 65 H duoBlock Control: Siemens 840D Solutionline Iiedpfx Aszi Dz Ioa Eod Year: 2009 new spindle: 2026 SPECIFICATIONS Travel X-Axis: 700 mm Y-Axis: 700 mm Z-Axis: 700 mm Spindle speeds: 12.000 rpm Tool: CAT 40 Toolchanger Tool capacity: 45 Amount of paletts: 2 Palett size: 500 x 500 mm Equipment Chip conveyor Chip rinsing pistol Internal cooling: 40 bar Cooling tank: 960 l Caliper: Renishaw Tool setter: Blumlaser 3D Quickset Electronical handwheel New in 2026 Spindle bearing Rotary union All pneumatic lines All oil and air filters All oils and fats Laser serviced Various wearing parts

Condition: new, 40 mm 8,5 U/min 120 mm roll diameter 152 / 162 mm engine output 1,1 kW connected load 400 V weight 395 kg Overall size 900x600x1100 mm Iiedpjy H N I Defx Aa Ejd Equipment / Accessories: - Two driven rollers - Manual delivery of the upper roller - Working position horizontal and vertical - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - The standard roller set is included. He can turn different profiles are used

Condition: new, 50 mm 8,5 U/min Iedpfey H N Hmox Aa Esid 100 kN roll diameter 162 mm Drive 1,5 kW range L-W-H 1100x800x1500 mm weight 450 kg Equipment / Accessories: - Two driven rollers - Hydraulic delivery of the upper roller - Digital display with memory function - Working position horizontal and vertical - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - Footswitch - standard roller set

Condition: new, 95 mm Shaft diameter 30 mm Shaft revolutions 7 U/min roll diameter 132 mm Drive 0,75 kW weight 220 kg range L-W-H 530x900x660 mm Equipment / Accessories: - Two driven rollers with grooved surface - Manual feed of the upper roller - working position horizontal and vertical (with tilting base) - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - The standard roller set is included. He can turn different profiles are used e.g. Flat iron, T-iron, solid material Iedpfeyv N A Hjx Aa Eeid etc.

Condition: new, sheet width 1250 mm plate thickness 5,5 mm pre-bending 5,0 mm roll length 1280 mm min. dia. 210 mm roll diam. toproll 140 mm weight 1365 kg range L-W-H 2.020 x 900 x 1.200 mm Standard features: - Central rollers via electric motor, planetary reduction gear and Gear drive driven - Swivel top roller Iedpfx Aoyvvpyja Esid - Main engine with brake device - Conical bending device - Mobile controller and foot pedal - CE mark / Declaration of Conformity Additional equipment: - motorized rear roller adjustment - Digital display for back roller - induction hardened rolls

Condition: new, Year of construction: 2019, sheet width 1050 mm Iijdpjzh N Uwsfx Aa Eod plate thickness 4,0 mm roll diameter 110 mm total power requirement 2,2 kw

Condition: new, engine 2,8 KW Iedpey H N Nzsfx Aa Ejid weight of the machine ca. 320 kg dimensions of the machine ca. 86 x 90 x 85 cm

Condition: new, sheet width 1550 mm plate thickness 4,5 mm pre-bending 4,0 mm roll length 1550 mm Isdpfx Aaeyvvrhs Eeid min. dia. 190 mm roll diam. toproll 130 mm weight 1265 kg dimensions 2670x1110x1050 mm Domestic equipments: - Central rollers via electric motor, planetary reduction gear and Gear drive driven - Swivel top roller - Main engine with brake device - Conical bending device - Mobile controller and foot pedal - CE mark / Declaration of Conformity Additional equipment: - induction hardened rolls - motorized rear roller adjustment - Digital display for back roller

Condition: new, L-beam 50x5 mm square material 50x40x3 mm I - beam section - flat steel 120x15 mm I-beam section - upend 60x10 mm round material Ø 35 mm tube diameter Ø 70x2 mm roll diameter 155 mm Iodpjyvvniofx Aa Esid bending speed 4,3 m/min Shaft diameter 50 mm total power requirement 1,5 kW weight 400 kg dimensions 830x730x1350 mm Domestic equipments: - Extended special steel shafts - a set of hardened rollers - Bottom rollers are driven - lateral straightening rollers - Foot pedal - horizontal and vertical working - CE mark / Declaration of Conformity - Operating instructions in German

Condition: used, Year of construction: 1993, 3 Rollers Bending Machine ZOPF TRENNJAEGER RS 302 ME Year of construction: 1993 Capacity: 1/4'' to 1 1/2'' - Ø 10 mm to Ø 60 mm Rectangular tube 50 x 30 x 3 Square tube 40 x 40 x 3 (see description on photo) Delivered with: 1 set of rollers 1'' - 6/4'' - 1 1/4'' + various (see photos) Iisdpfozku Ibox Aa Ejd Voltage: 380 V Dimensions (L x W x H): 1000 x 1000 x 1600 mm Weight: approx 200 kg

Year of construction: 2017, condition: used, functionality: fully functional, machine/vehicle number: 1102, I will sell a TENON spacer frame bender. It has a Polish menu, the bender is in very good condition, in constant use. It has a Polish menu. Iijdpfx Aowp Szlja Ejd

Condition: excellent (used), Year of construction: 2018, operating hours: 34,000 h, functionality: fully functional, Great opportunity! Like-new Salvagnini S4 / P4 from the first owner, built in 2018! The machine is in perfect, like-new condition and ready for immediate use! The system has been regularly serviced by Salvagnini, and the machine is covered by a maintenance contract. Technical data and Salvagnini internal number: Punching machine/shear with rotating station S4Xe.30 consisting of: Conveyor belt TAC30.L2000 Corner turning device DA30 Punching machine S4Xe.30 Punch head H3 Oil-dynamic hydraulic unit HU22E Control and management of the SiX system Right-angle shear CS5S Turning device DF Lower cylinder EI09 Embossing unit BU30 Double rotating punch P2R3132 Double rotating punch P2R3334 Threading roll unit ME35 Device for automatic application of self-adhesive labels LBC (label printer) Portal robot MC30 Conveyor with brushes CTS30 Shear lift table TCV3015 Water-air cooling unit R81E Tools (detailed list available on request) P4Xe-3125 Swivel bending machine including roller and turning station consisting of: Iodozh I Iispfx Aa Eeid Shear lift table TCV3015.CT.RPC Feeder-destacker device PCD3015 Turning device RIP3015 Bending center P4Xe-3125 Upper bending die LS Lower bending die LI Programmable clamping device U1 Standard clamping foot NS Control and management of the SiX system Work surface with balls SFE Device for cleaning and lubricating the bending dies PSE Asymmetrical control for auxiliary bending tools for positive bends CLA-A CLA tool set with "swan neck profile" UCE1500G38 Asymmetrical control for auxiliary bending tools for negative bends CLA-N-A CLA tool set with "swan neck profile" for negative bends UCE1500NG38 Device for V-notch RSU.UR-4 Swiveling device for auxiliary tools T Option for cutting and dispensing profiles CUT.SPC31 T-tool for 90° bends UTZ2 Delivery device/buffer for panels SAP34.POS The system has a hinged belt conveyor for central disposal of the sheet metal sections. These are then conveyed to tipping containers via a swan neck conveyor. Sorting according to stainless steel, aluminum, and black sheet metal is fully automatic. A weighing and level measuring device is integrated and reports the level via the control system. The machine can be inspected and tested by arrangement. Additional videos and detailed images of the system are available on request!

Condition: good (used), Year of construction: 1988, Work piece thickness 0,4 - 8 mm Work piece height max. 51 mm Min. work piece width 50 mm min work piece length 180 mm edge magazine for PVC and strips pneumatic pressure rollers for edge magazine edge snipping unit cutting unit with 2 saws milling aggregate buffing unit Feed speed 11 m/ min Ijdpobahd Esfx Aa Eoid Glue application with fin nozzle Air pressure 6 bar length 3750 mm