Used Renner Rsk-Pro 7,5 for sale (7,031)

Year of construction: 2022, condition: as good as new (ex-display), REKO 510-B Auxiliary compressor (reciprocating compressor) Hjdjpyhpdspfx Aa Ejfi incl. operating hours counter incl. 3 litre compressed air tank Hours: 0.75 Bh Year: 2022 Maximum pressure: 10 bar Flow rate: 380 l/min Nominal power: 3.0 kW Mains voltage: 400 V Compressor speed: 1200 min-1 Compressed air tank: 3 liters Dimensions: 735 x 620 x 698 mm Weight: 45 kg We always have a wide range of new and used compressors in stock!

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 1 h, New trade fair exhibit (available immediately): RENNER Riko 700/250 S-KT piston compressor with galvanized 250 liter container with refrigeration dryer and level-controlled condensate drain with sound insulation hood Hfedorxu Erepfx Aa Eji with CEE plug with metal buffer set for compressed air tanks Technical data: Motor power: 4.0 kW Rated voltage: 400V Max. pressure: 10 bar Delivery quantity at 7 bar: 570 l/min Cylinder / Stages: 2/2 Sound level: 68 dB(A) Volume compressed air tank: 250 liters Dimensions L x W x H: 1411 x 722 x 1377 mm Weight: 296kg We always have a large selection of new and used compressors in stock! Available immediately.

Year of construction: 2021, operating hours: 2,235 h, condition: used, used screwcompressor immediately available: variable RENNER RSF 250 D - (6 to 8 bar) frequency-controlled, direct-driven screw compressor with RENNERtronic control with REflex control - adjustable pressure range 6 to 8 bar Hours: 2235 h Pressure: 6 to 8 bar Nominal output: 250 kW Quantity delivered: at 6 bar: 12.13 to 49.30 m³ / min at 7 bar: 11.80 to 44.50 m³ / min Sound level: 84 dB (A) Compressed air outlet: DN 100 Dimensions length x width x height: 3663 x 2100 x 2338 mm Weight: 5530 kg Year: 2021 Visit our shop. Hodpfx Ajh Rvpkoa Ejfi We always have a large selection of new and used compressors in stock! Immediately available.

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 2 h, pressure (max.): 14 bar, REKO H 510/150 piston compressor incl. operating hours counter incl. 150 litre compressed air tank Hours: 2.00 Bh Year: 2024 Maximum pressure: 14 bar Flow rate (12 bar): 360 l/min Nominal power: 3.0 kW Mains voltage: 400 V Compressor speed: 1200 min-1 Hodpfx Aaovr Eico Eefi Compressed air tank: 150 liters Dimensions: 1345 x 457 x 1054 mm Weight: 115 kg We always have a wide range of new and used compressors in stock!

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, functionality: fully functional, machine/vehicle number: 31524565, overall weight: 286 kg, available immediately: RENNER Riko 960/270 ST-KT piston compressor with galvanized 270 liter container with refrigeration dryer and time-controlled condensate drain with star-delta starter with metal buffer set for compressed air tanks Technical data: Motor power: 5.5 kW Rated voltage: 400V Max. pressure: 10 bar Delivery quantity at 7 bar: 740 l/min Cylinder / Stages: 2/2 Sound level: 79 dB(A) Volume compressed air tank: 270 liters Dimensions L x W x H: 970 x 795 x 1880 mm Weight: 264 kg Hfjdjwhxluspfx Aa Eji We always have a large selection of new and used compressors in stock! Available immediately.

Condition: like new (used), Year of construction: 2018, operating hours: 2 h, machine/vehicle number: RS18_5_ReAN19440656, pressure (max.): 15 bar, Showcase screw compressor RENNER RS 18.5 - 15 bar Year of manufacture: 2018 Operating hours: 2 operating hours Hsdpfx Asv Rbvcoa Ejfi Technical specifications Type: RS 18.5 Operating pressure: 15 bar(ue) Delivery volume at 15 bar, according to ISO 1217 Appendix C: 1.89 m³/min Protection class/insulation class of drive motor: IP 55/ISO F Rated power of drive motor: 18.5 kW Operating voltage/frequency: 400/50 V/Hz Sound pressure level: 71 dB(A) Length: 1287 mm Width: 799 mm Height: 1296 mm Weight: 532 kg Compressed air connection: G 1 1/4" Visit our Retail store. We always have a large selection of new and used compressors in stock!

Condition: new, Sick MICS3-CBAZ40PZ1P01 Id. 1092720 microScan 3 Pro safety laser scanner SN:21490928, unused in opened original packaging, 100% functional, scope of delivery as shown in the photos. Hfsdszl N S Rspfx Aa Esi

Condition: used, mileage: 32,732 km, power: 120 kW (163.15 HP), first registration: 07/2024, fuel type: diesel, overall weight: 2,800 kg, color: white, gearing type: mechanical, number of seats: 3, total length: 5,140 mm, total width: 1,928 mm, total height: 1,909 mm, loading space length: 2,336 mm, Year of construction: 2024, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Errors and prior sale excepted! Internal number: 0648.4418461 ----EQUIPMENT * Airbag: Thorax bag and pelvis side airbag for passenger * Airbag: Thorax bag and pelvis side airbag for driver * Seats: Two-passenger seat * Active brake assist * Rear camera (non-retractable) * Heated windshield washer system * Wooden floor (cargo area) * Interior paneling in cargo area up to roof height – wood * LED light strip in cargo area * Load securing rail system * Navigation accessory: Live Traffic Information * Navigation * Package: Park – Rearview camera – PARKTRONIC * Winter package – Seat heating for driver and passenger seat – Heated washer jets – Heated steering wheel * Tire pressure monitoring – on front and rear axle (wireless) * Rear door: Rear swing doors, opening up to side wall * Seats: Driver’s seat cushion depth adjustment * Seat heating on passenger side * Seat heating on driver’s side * Blind spot assist * Full partition with 1 window * Traffic sign assist * Electronic stability program (ADAPTIVE ESP) with integrated anti-lock braking system (ABS) – Traction control system (ASR) – Electronic brake-force distribution (EBV) – Brake assist (BAS) * Electrical wiring for trailer socket – electric wiring for trailer power supply – without trailer control unit * ATTENTION ASSIST: ATTENTION ASSIST supports the driver during long, monotonous journeys by monitoring attentiveness. If signs of fatigue or increasing inattentiveness are detected, it recommends a break. * Front cup holders * Removable tow hook front/rear * Axle ratio i = 3.267 * Airbag passenger side * Airbag driver side * Exterior mirrors electrically adjustable and heated, left and right * Outside temperature display * Battery: Buffer battery for starting process Hjdpfx Aasxci Hco Eofi * Battery: AGM 12V / 92Ah * Attachment points in the roof frame * Hill-start assist * Third brake light * Adaptive brake lights * Comfort roof control unit * Diesel particulate filter * Electronic tachometer * Light assist – automatically activated headlights * Power windows driver/passenger – with anti-trap protection, quick lowering and raising * Generator 14 V / 250 A * Generator management – Generator management helps reduce fuel consumption and CO2 emissions. The alternator is disengaged, and the onboard electronics are powered by the battery when sufficiently charged. This relieves the engine from charging the battery during acceleration, for example. During braking and overrun operation on downhill runs, the alternator is re-engaged, and the vehicle’s kinetic energy is recuperated to charge the battery. * Speed limiter 210 km/h * Transmission: 6-speed manual gearbox TSG 380 * Weight variant 2,800 kg * Seat belt reminder for passenger seat * Seat belt reminder for driver seat * Lockable glove compartment * Tailgate * Side interior paneling in cargo area * Climate control – Tempmatic * Instrument cluster with pixel matrix display – Operated via multifunction steering wheel buttons – Round dials for speedometer and tachometer or fuel and coolant gauges – High-resolution white and red pixel matrix display between large round dials * Comfort driver’s seat * Comfort window opening/closing * Communication module (LTE) for digital services * Headrests (2) in front * Large fuel tank, approx. 70 liters * Solid paint * Steering wheel

Condition: excellent (used), Year of construction: 2015, The EFITM VUTEk® HS100 Pro high-volume digital UV inkjet press combines the productivity of screen with image quality approaching off set Printer has been flushed and prepared for transport. Revolutionary productivity Hsdpezl D Adefx Aa Eefi • 3.2-meter hybrid digital UV printer handles up to 100 beds/boards per hour in production mode; up to 70 boards per hour in P-O-P mode. • Lower cost per board by eliminating makereadies for job versioning, regionalization, and customization. • Less waste, less downtime, and no increase in labor costs. For further technical details please refer to enclosed brochure

Condition: used, mileage: 275,203 km, power: 130 kW (176.75 HP), first registration: 08/2018, fuel type: diesel, tire size: 215/60R17, axle configuration: 4x2, wheelbase: 3,280 mm, fuel: diesel, color: black, driver cabin: day cab, gearing type: automatic, emission class: euro6, number of seats: 5, total length: 5,400 mm, total width: 1,920 mm, total height: 1,930 mm, loading space length: 1,800 mm, loading space width: 1,690 mm, loading space height: 1,390 mm, Year of construction: 2018, Equipment: ABS, Apple CarPlay, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, navigation system, power mirror, traction control, trailer coupling, = Additional Options and Accessories = - Heated mirrors - Tinted windows - Halogen lamp - None - Alloy wheels - Manual - Radio/cassette - Partition = Notes = Configuration: 4x2, Payload: 1185 kg, Unladen weight: 1770 kg, Gross vehicle weight: 2955 kg, Towing capacity, unbraked: 750 kg, Towing capacity, center axle, braked: 2200 kg, Trailer coupling, Alloy wheels, Type of cab: Double cab, Cruise control, Air conditioning, Number of airbags: 1, Parking assistance: None, Tinted windows, Electric windows, Electric mirrors, Partition, Radio/cassette, Carplay, GPS navigation, Color: Black, Metallic, Heated mirrors, Lighting type: Halogen lamp, Air conditioning, Bluetooth, Engine power: 130 kW (174 hp), Fuel: Diesel, Euro: 6, Drive technology: Timing chain, Transmission type: Automatic, Power steering, ABS, ASR, Starter battery, Body type: additionally extended, Side wall paneling, Roof rack: None, Side doors: 1, Side windows: 2, Rear closure: Double door, Central locking, Number of seats: 5, Seat arrangement: 2+3, Seat covering: Leather, Seat adjustment: Manual, Double cab, air conditioning, automatic transmission, EURO6, carplay, leather, Tire type: Summer tires Hodpfozlylbex Aa Ejfi = Additional Information = General Information Number of doors: 1 License plate: V-165-PR Axle Configuration Tire size: 215/60R17 Brakes: Disc brakes Suspension: Coil suspension Axle 1: Tire tread depth left: 3 mm; Tire tread depth right: 5 mm Axle 2: Tire tread depth left: 8 mm; Tire tread depth right: 5 mm Weights Unladen weight: 1,770 kg Payload: 1,185 kg GVW: 2,955 kg Functional Loading area height: 54 cm Interior Upholstery: Leather Maintenance APK (Technical Inspection): Valid until 09.2026 Condition Overall condition: average Technical condition: average Optical condition: average Damage: none Number of keys: 2 Financial Information Leasing price: 195 € per month (delivery van, 72 months); Please inquire for further information and terms.

Condition: used, Year of construction: 2019, pressure 60.0 t chamfer lenght 1270 mm distance between columns 1000 mm column arm 410 mm ram stroke speed 160 mm/sec work speed 10.0 mm/sec return speed 165 mm/sec work stroke 275 mm dayligth 530 mm table height 900 mm table width 90.0 mm back stop - adjustable 500 mm control DA 66T oil volume 150 ltr. voltage 380 V engine output 7.5 kW Weight 4320 kg range L-W-H 2250 x 1960 x 2750 mm current new price approx. 65.000 euros Hfsdpszlulpsfx Aa Eoi very rarely used! Special price on request - in checked condition - machine video - ?v=KRifrqTgkVU ----- SPEED BEND PRO CNC press brake: * increased installation height * increased cylinder stroke * and increased bending beam speeds ----- Equipment: - CNC electro-hydraulic press brake - DELEM CNC control model "DA-66T" graphics/touchscreen * 2D graphic touchscreen programming mode * 3D representation in simulation and production * 17" color TFT screen with high resolution * Bending sequence calculation * Product programming and representation in actual size * USB interface - CNC controlled axes: Y1 - Y2 - X - R - CNC electro-motorized back stop (X axis) * on ball screws * Travel path .. 500 mm * Travel speed .. 500 mm/s * with 2x manually adjustable stop fingers - CNC electro-motor height adjustment (R axis) * Travel path .. 250 mm * Travel speed .. 350 mm/s - AMADA/PROMECAM upper tool holder * including clamping jaws with upper wedge camber * 1x ROLLERI split set 60° upper tool - AMADA/PROMECAM lower tool holder * including 1x die shoe "C 1050-R" * 1x AMADA 1-V die 85° - Safety device at the rear (door including safety switch) - BOSCH/HOERBIGER hydraulic components - SIEMENS electrical components - FIESSLER AKAS laser protection device in front of the machine - 2x front support arms with SLIDING system (HIWIN plain bearings) - 1x freely movable double foot control - CE mark / Declaration of conformity - Operating instructions including circuit and hydraulic diagram

Condition: ready for operation (used), Year of construction: 2020, total height: 1,485 mm, total width: 680 mm, overall weight: 1,496 kg, product length (max.): 5,618 mm, This 5-axis CEHISA PRO 12 CONCEPT edgebander was manufactured in 2020. It accommodates edgebanding materials from 0.4 to 8 mm and has a maximum edge height of 65 mm. The machine features a feed speed of 9/14 m/min and a total electrical output of approximately 12.9 kW. If you are looking to get high-quality edgebanding capabilities, consider the CEHISA PRO 12 CONCEPT machine we have for sale. Contact us for further details. • Edgebanding material (coils): 0.4–3.0 mm (0.016"–0.12") • Edgebanding material (solid wood strips): up to 8 mm (0.31") • Maximum edge height: 65 mm (2.56") • Panel thickness (min–max): 10–60 mm (0.39"–2.36") • Minimum panel length: 120 mm (4.72") Hsdpfezltbcsx Aa Eofi • Minimum panel width: 70 mm (2.76") • Feed speed: 9 / 14 m/min (30 / 46 ft/min) • Note: 9 m/min when corner rounding is active • Total electrical output: approx. 12.9 kW • Pneumatic supply: 6–7 bar (87–101 psi)

Condition: used, mileage: 120,000 km, power: 120 kW (163.15 HP), first registration: 10/2019, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 11/2026, color: white, gearing type: mechanical, emission class: euro6, total length: 6,363 mm, total width: 2,050 mm, total height: 2,522 mm, Year of construction: 2019, Equipment: air conditioning, central locking, electronic stability program (ESP), soot filter, Special equipment: Passenger-side airbag, exterior mirrors electrically adjustable and heated, both sides, design package, driver assistance system: emergency brake assist, reinforced rear suspension, speed limiter, rear wing doors (opening angle 270 degrees), seats in cab: sprung driver's seat, seat base cover Additional equipment: Driver's airbag, exterior mirrors with wide-angle, load compartment floor plate, on-board computer, rear wing doors without windows, body/build type: standard high-roof van, padded headrests, fuel tank: 90 liters, load compartment partition wall, engine 2.0 L - 120 kW Blue-HDI FAP CAT, radio pre-installation, 4 speakers, wheelbase 4035 mm, spare wheel in standard tire configuration, low-emission according to Euro 6 emission standard, rear disc brakes, sliding door right for cargo/passenger compartment, SCR system (AdBlue technology), side protection strips, seat upholstery/trim: fabric, seats in cab: double passenger seat (incl. automatic seat belt), seats in cab: driver's seat with armrest, height adjustable, seats in cab: driver's seat with lumbar support, permissible total weight 3.5 t The vehicle is in very good condition! Service booklet, new timing belt Hsdpszlpw Tefx Aa Eofi Financing possible via Santander Bank

Condition: good (used), mileage: 60,008 km, power: 75 kW (101.97 HP), first registration: 09/2020, fuel type: diesel, tire size: 195/65R15, axle configuration: 4x2, wheelbase: 2,780 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, number of gears: 5, emission class: euro6, number of seats: 2, total length: 4,400 mm, total width: 1,860 mm, total height: 1,800 mm, loading space length: 1,690 mm, loading space width: 1,320 mm, loading space height: 1,190 mm, Year of construction: 2020, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, power mirror, traction control, = Additional options and accessories = - Heated mirrors - Halogen lamp - None - Manual - Radio/cassette - Fabric - Partition = Notes = Configuration: 4x2, Payload: 690 kg, Unladen weight: 1295 kg, Gross vehicle weight: 1985 kg, Towing capacity, unbraked: 690 kg, Towing capacity, center axle, braked: 1350 kg, Cabin type: Single cab, Cruise control, Air conditioning, Number of airbags: 1, Parking assistance: Front and rear, Electric windows, Electric mirrors, Partition, Radio/cassette, Color: White, Maintenance manual, Heated mirrors, Lighting type: Halogen lamp, Bluetooth, Engine power: 75 kW (101 hp), Fuel: Diesel, Euro: 6, Drive technology: Timing belt, Transmission type: Manual, Gears: 5, Power steering, ABS, ASR, Starter battery, Body type: Standard, Side paneling, Roof rack: None, Side doors: 1, Rear closure: Double door, Central locking, Number of seats: 2, Seat configuration: 1+1, Seat cover: Fabric, Seat adjustment: Manual, 1.5 L1 NAP Euro6 AC 102 hp, 1st owner, full service history!, Spare wheel, Tire type: All-season tires = Additional information = General information Number of doors: 1 License plate: VGN-77-S Axle configuration Tire size: 195/65R15 Brakes: Disc brakes Suspension: Coil spring suspension Axle 1: Tire tread depth left: 4 mm; Tire tread depth right: 4 mm Axle 2: Tire tread depth left: 5 mm; Tire tread depth right: 5 mm Weights Unladen weight: 1,295 kg Payload: 690 kg GVW: 1,985 kg Functional Loading area height: 58 cm Maintenance APK (Technical inspection): valid until 09.2026 Condition Technical condition: good Optical condition: good Hedpfx Aaezlpqme Ejfi Damage: none Number of keys: 2 Financial information Leasing price: €177 per month (delivery van, 72 months); Please inquire for more information and conditions.

Year of construction: 2018, condition: excellent (used), 452 USED Imanpack flowpack bread packaging machine. TECHNICAL DATA: Hsdpfxszlht Hj Aa Ejfi - Power: 4.3 kW, - Air pressure: 6 bar, - Year of manufacture: 2018. EXTERNAL DIMENSIONS (in cm) - L: 430, - W: 100, - H: 210, - Feeder length: 260. EQUIPMENT: - Label printer. Paid options available: transport of the device. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN.

Condition: excellent (used), Year of construction: 2016, Boy 55A Pro / Operating hours: 18,153 in automatic mode / Machine in very good technical condition. Year of manufacture: 2016 Hfodpfjzc Naqex Aa Eji Injection unit: Screw diameter: 38 mm Injection weight: 123.9 g Injection pressure: 1508 bar Metering volume: 136.1 ccm Clamping unit: Clamping force: 55 t tie bar distance: 360x335 mm size of clamping platens: 665x600 mm ejector: hydraulic clamping unit: hydraulic Control system: Procan Alpha - touch screen Additional equipment: Machine in very good technical condition Operating hours: 18.153 in automatic mode Pneumatic core x 2 injection unit hardened - bimetal The machine has been regularly serviced by the authorized service boy in France It is possible to change the screw diameter for fi 32 mm or 42 mm Dimensions: Weight: 2430 kg Length/width/height: 3.25x1.14x2.02 m Drive: Pumps/motor: 11 kW Heating power: 7,7 kW Total power: 18,7 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2017, Boy 55A Pro / Operating hours: 16,624 in automatic mode / Machine in very good technical condition. Year of manufacture: 2017 Injection unit: Screw diameter: 38 mm Injection weight: 123.9 g Injection pressure: 1508 bar Metering volume: 136.1 ccm Clamping unit : clamping force: 55 t tie bar distance : 360x335 mm size of clamping platens: 665x600 mm Ejector: hydraulic clamping unit: hydraulic Hsdpszc Nbzofx Aa Esfi Control system: Procan Alpha - touch screen Additional equipment: Machine in very good technical condition Operating hours: 16.624 in automatic mode Pneumatic core x 2 injection unit hardened - bimetal The machine has been regularly serviced by the authorized service boy in France It is possible to change the screw diameter for fi 32 mm or 42 mm Dimensions: Weight: 2430 kg Length/width/height: 3.25x1.14x2.02 m Drive: Pumps/motor: 11 kW Heating power: 7,7 kW Total power: 18,7 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2017, Boy 55A Pro / Operating hours: 17,083 in automatic mode / Machine in very good technical condition. Year of manufacture: 2017 Injection unit: Screw diameter: 38 mm Hfjdpfxszc Nbbs Aa Eoi Injection weight: 123.9 g Injection pressure: 1508 bar Metering volume: 136.1 ccm Clamping unit: Clamping force: 55 t tie bar distance: 360x335 mm size of clamping platens: 665x600 mm ejector: hydraulic clamping unit: hydraulic Control system: Procan Alpha - touch screen Additional equipment: Machine in very good technical condition Operating hours: 17.083 in automatic mode Pneumatic core x 2 injection unit hardened - bimetal The machine has been regularly serviced by the authorized service boy in France It is possible to change the screw diameter for fi 32 mm or 42 mm Dimensions: Weight: 2430 kg Length/width/height: 3.25x1.14x2.02 m Drive: Pumps/motor: 11 kW Heating power: 7,7 kW Total power: 18,7 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: as good as new (ex-display), Emotron frequency inverter (28254) Type U2T-7.5/400 - MIEMC 7.5 kW 0-100 Hz Weight 26 kg Height 500 mm Width 300 mm Depth 240 mm Hfjdpfjh Dm E Usx Aa Eoi unused

Condition: new, Year of construction: 2024, Effective delivery rate approx. 1050 l/min Maximum pressure 10 bar Tank capacity 270 l Air outlet ½" Sales unit 1 Dimensions and weights Length approx. 1200 mm Width/Depth approx. 650 mm Hodsfh Hahjpfx Aa Eofi Height approx. 1540 mm Weight approx. 295 kg Electrical data Power consumption of electric motor 7.5 kW Connection voltage 400 V Phase(s) 3 phases Type of current AC Mains frequency 50 Hz Noise emission Sound pressure level Lp 62 dB(A) Explanation of sound pressure level: Sound pressure level at a distance of 1 m according to DIN 45635 T 13 Motor(s) Motor type Electric Location: In stock at warehouse 54634 Bitburg - immediately available -

Condition: as good as new (ex-display), Year of construction: 2026, OPTIdrill D 26PRO - Pillar drilling machine Bench and pillar drilling machine with V-belt drive User-friendly safety switch according to IP 54 with undervoltage release and separate emergency stop button 400-volt models with right/left rotation Drilling depth stop Precisely manufactured drilling table with diagonally running T-slots Height adjustment of the drilling table via rack and pinion Drilling table can be tilted ± 45° and rotated 360° V-belt cover with safety switch Aluminum die-cast quill lever in one piece with soft-grip handles Industrial motor Hedpfx Aaodqzbnj Esfi Precision spindle bore Machine operation including safety electricals in 24 V DC Guaranteed run-out accuracy

Condition: new, Year of construction: 2025, Holzkraft Edge Sander: KSO 150 F PRO With oscillating sanding belt for the best sanding results Item number: 5390020 Brand: Holzkraft Sanding unit can be pivoted using a hand crank Hedpev Sk Nnjfx Aa Ejfi The welded steel machine stand guarantees high torsional rigidity and vibration-free operation Oscillating sanding belt with separate gear motor for better sanding results Oscillation can be optionally activated Granite-coated sanding sole for a longer sanding belt service life Height-adjustable sanding table for utilizing the entire sanding belt width Additional table with extraction openings for sanding radii on the rubberized guide roller Sanding sleeve device with attachable work table The spring-loaded belt tension automatically compensates for belt length differences With adjustable stops, ideal for veneer sanding The grooved veneer stop allows the veneer overhang to be adjusted TECHNICAL DATA Dimensions and Weights Length (product) approx. 1700mm Width/Depth (product) approx. 1000mm Height (product) approx. 1150mm Net weight approx. 300kg Extraction connection Number of extraction nozzles: 2 Extraction nozzle diameter: 100mm Worktable(s) Worktable length: 950mm Worktable width: 450mm Worktable height adjustment: 110mm Electrical data Connection voltage: 400V Mains frequency: 50Hz Oscillation motor power: 0.11kW Sanding unit Sanding belt length: 2640mm Sanding belt width: 150mm Belt rotation speed(s): 14m/s Oscillation stroke: 15mm Sanding surface length: 800mm Sanding surface width: 150mm Sanding unit pivoting 0 – 45° SCOPE OF DELIVERY 1x Sanding Belt K100 5x Rubber Rollers Ø25, Ø30, Ø40, Ø45, Ø50 mm 6x Sanding Sleeves K80 - Ø25, Ø30, Ø35, Ø40, Ø45, Ø50 mm On-Board Tool Kit Miter Gauge

Condition: ready for operation (used), Schmalenberger ZHT4 32-13/2-7.5 submersible pump, serial number: 9700005166/1, used, shows normal signs of wear and tear, 100% functional, scope of delivery as shown in the photos. ATTENTION: Please request a separate quote for packaging and shipping costs! Hedpfx Aei D Nvcea Eofi

Condition: used, Year of construction: 2003, Kanalventilator Absaugung - Duct Fan Coral PAP HP 7,5 (Absaugung - Extraction) Baujahr / Year 2003 HP 7,5 REVS 2800 HZ 50 VOLT 380 / 660Zum Absaugen von Holzspänen oder Papierresten For vacuuming wood chips or paper residue Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Hfjdpfsiqtq Nex Aa Eji Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: ready for operation (used), Year of construction: 2016, travel distance X-axis: 2,100 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 100 mm, spindle speed (max.): 50,000 rpm, spindle motor power: 3,600 W, number of axes: 3, This 3-axis DELTA LGT2113 PRO gantry milling machine was manufactured in 2016. It features a working area of 2100 mm in the X-axis and 1300 mm in the Y-axis, equipped with a powerful 3.6 kW spindle capable of reaching 50,000 rpm. The machine includes a 12-position automatic tool changer and a 4-zone vacuum table, making it suitable for various milling and specialized cutting applications. If you are looking to get high-quality milling capabilities, consider the DELTA LGT2113 PRO machine we have for sale. Contact us for further details. • Tool taper: HSK 25 • Number of tool slots: 12-position automatic tool changer. • Main electronic connection: 380 V, 50/60 Hz • Pump drive power: 5.5 kW each • Gantry-type CNC milling machine • Italian-made machine • 4-zone vacuum table • Designed for specialized industrial applications, especially for the production of tooling used in the printing industry • Also suited for a wide range of general milling operations • X and Y axes: Rack and pinion drive • Z axis: Ball screw drive • Automatic centralized lubrication system • Liquid-cooled spindle • The spindle was completely overhauled a few months ago, including bearing replacement, and is currently in excellent working condition Hodpfx Aaezk Ipxj Esfi • Integrated Blum tool measurement system with optical transmitter/receiver (probe not included) • 2 vacuum pumps • Capacity: 250 m³/h each • Power supply for vacuum system: 230/400 V, 50 Hz • Windows 10 operating system • Proprietary 2.5D control software • Deltacam CAM software • 17” TFT display • Dust extraction system (vacuum cleaner not included) • Oscillating knife head for precise cutting of rubber, foam and similar materials, allowing the machine to perform both milling and specialized cutting applications • Minimum Quantity Lubrication (MQL) system for improved machining performance and extended tool life • The machine is currently under power and can be inspected in operation • It is no longer fully utilized, which is the reason for its sale • The machine is in good technical condition and the recently refurbished spindle is operating flawlessly