Used Prism Winder Driven for sale (4,265)

Condition: good (used), Year of construction: 2003, sheet width 2050 mm plate thickness 10.0 mm ST pre-bending 8.0 mm ST diameter of upper rolls ~ 220 mm side roll diameter ~ 170 mm diameter of lower rolls ~ 190 mm bending speed ca. 2.0 + 5.0 m/min Gbjdpfoz N Hxhjx Akyeu Control ELAP LYNX oil volume 80.0 Liter voltage 380 V total power requirement 5.5 kW weight 5000 kg range L-W-H 3500 x 1550 x 1400 mm Current new price incl. accessories: approx. € 90.000 Special price on request Equipment: - Robust electro-hydraulic 4-roll plate bending machine - 4-roll design offers a wide range of bending and rolling capabilities - MG NC control unit "ELAP LYNX" * Operation – control of all rolls and machine axes * Digital position display * Manual operation via joysticks * Movable control panel - Two central rolls driven directly by hydraulic motors - Conical rolling possible via roll tilting - Side roll parallelism maintained via torsion shafts - Pre-bending on both ends - Diameters up to 1.1 times the top roll diameter are possible - Forged and hardened rolls (hardness: 53–55 HRC) - Low-maintenance, robust machine design - Permanent lubrication for all bearings - Sturdy welded steel construction - Selectable bending speeds (2 settings) - Electro-hydraulic drop-end bearing for easy removal of rolled parts - Pressure gauge/display for rolls - Safety system (safety trip wire with switch unit) - Operating manual (PDF)

Condition: ready for operation (used), Year of construction: 1992, operating hours: 60,000 h, spindle speed (max.): 3,000 rpm, travel distance X-axis: 340 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: FANUC, controller model: Series 15 T, number of slots in tool magazine: 12, number of axes: 2, Horizontal turning machine manufactured in 1992. This Monforts RNC 5 features a maximum turning diameter of 340 mm and a turning length of 1000 mm. It is equipped with a control system from Fanuc Series 15 T and offers 12 tool positions for enhanced versatility. If you are looking to get high-quality turning capabilities, consider the Monforts RNC 5 machine we have for sale. Contact us for further details. - Typical Workpiece Materials: Case-hardening steel - Typical Workpiece Components: Shafts, gears - Production Environment: Single parts and small series- Max. Swing Diameter over Bed: 600 mm- Swing Diameter over Bed Slide: 450 mm- Max. Turning Diameter: 340 mm- Max. Turning Length: 1000 mm- Turning Diameter Range: 50 - 250 mm- Number of Tool Positions: 12 tools- Driven Tools Power: 4.5 kW- Driven Tools Speed: 3000 rpm- Counter Spindle: No (Single main spindle machine)- Material Clearance / Spindle Bore: 85 mm- Bar Capacity Max.: 78 mm- Chuck Work Max Weight: 25 kg- Center Work Max Weight: 35 kg Godpez N Hbcofx Akyjbu Technical Specification Counter Spindle No Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2011, operating hours: 44,137 h, spindle speed (max.): 6,000 rpm, travel distance X-axis: 190 mm, travel distance Z-axis: 330 mm, number of axes: 2, Horizontal turning machine manufactured in 2011. This Mazak Quick Turn Smart 100 S (QTS 100 S) features a maximum turning diameter of approximately 280 mm and a turning length of about 308 mm. It includes a 12-position drum turret for efficient tool changes and a programmable tailstock. If you are looking to get high-quality turning capabilities, consider the Mazak Quick Turn Smart 100 S machine we have for sale. Contact us for further details. MAZAK Quick Turn Smart 100 S (2011) - INFO- Main Spindle C-Axis: Without C-axis - Control: Mazatrol Smart (10.4" Color LCD) Godpfsz N Hdwox Akyjbu - Operating Hours: 44,137 hours - Turning Length: approx. 308 mm (Z-travel approx. 340 mm) - Turning Diameter: max. approx. 280 mm - Swing Diameter: approx. 584 mm - Turret: 1 Turret, 12-position drum turret (Bolt-on type), index time 0.17 s - Tool Holder: Mazak block holder (Bolt-on), various tool adapters / tool holders included - B-Axis (stepless 0.001°): No - Tailstock: Yes, programmable tailstock (centering point MT 4) - Main Spindle Speed: 6,000 rpm (Spindle nose A2-5, drive approx. 11 / 7.5 kW) - Bar Loader: No (Defective) - Bar Capacity / Passage: Ø 42 mm (Standard chuck 6" / 152 mm, 3-jaw hydraulic) - Optional (not included) Various tool adapters, tool holders, clamping devices, and set of collets - Chip Conveyor: No Technical Specification Counter Spindle No Driven Tools No

Condition: good (used), Proofing press 55x65cm Antique Gjdpez N Shhefx Akyebu The machine is in very good condition, can be used as an exhibit or as a printing machine. Max. format 550×650 mm Weight 650 kg Flow table, system of claws holding the sheet. Electrically driven spreading roller.

Condition: new, power: 471 kW (640.38 HP), overall weight: 45,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available immediately and in the short term, on our website. The following is an excerpt of the equipment. Complete equipment list available upon request. 960 l fuel tank capacity, behind the cab 80 l AdBlue tank capacity, left side 290 l hydraulic tank capacity, behind the cab Air compressor, 2 cylinders, 720 ccm, with energy-saving system Air dryer, 2-chamber, heated Air treatment system, electronically controlled AMS Electronic Braking System (EBS) Anti-lock Braking System (ABS) Full brake assistant Retarder, speed-dependent, adjustable Disc brakes on front axle Disc brakes on front steered axle Drum brakes on rear axle Drum brakes on 2nd rear axle Diesel engine MAN D3876 LF16, 471 kW (640 hp) power output, 3,000 Nm MAN TipMatic TX 12.30 OD, with torque converter automatic transmission, with Retarder 40 Tires, front axle: Michelin 385/65R22.5 X Multi Grip Z Steering Winter TL Tires, front steered axle: Michelin 385/65R22.5 X Multi Grip Z Steering Winter TL Tires, rear axle: Michelin 315/80R22.5 X WORKS HD D Drive Special TL Tires, 2nd rear axle: Michelin 315/80R22.5 X WORKS HD D Drive Special TL Tire pressure monitoring system (TPM), with tire temperature display 8x4/4 Front axle, 9,200 kg, not driven, dropped, steered, not liftable Front steered axle, 9,000 kg, not driven, straight, steered, not liftable Rear axle, 16,000 kg, tandem axle with through-drive, straight, not steered, not liftable 2nd rear axle, 16,000 kg, tandem axle without through-drive, straight, not steered, not liftable Digital axle load indicator (ALM) for trailer/semi-trailer Leaf spring suspension on front axle, parabolic, 3-leaf, steel Air suspension on front steered axle Leaf spring suspension on rear axle, parabolic, 5-leaf, steel Leaf spring suspension on 2nd rear axle, parabolic, 5-leaf, steel Cab GX: the maximum (wide, long, extra high) LED package Plus, front headlights, fog lights, turning lights Front headlights, LED Daytime running lights, LED Fog lights, LED Turning lights, LED Blinkers, side, LED 4 work lights on frame behind cab, 2 of which are extendable Exterior mirrors, electrically adjustable with maneuvering assist, heated Curb mirrors, left, electrically adjustable, heated Curb mirrors, right, electrically adjustable, heated Driver seat package Premium, air-suspended, seat heating and seat ventilation Co-driver seat package Premium, air-suspended, seat heating and seat ventilation Air conditioning, Climatronic Auxiliary heater, water-based, 6 kW Electronic Stability Program (ESP) Anti-Slip Regulation (ASR) Automatic voice recognition via driver card, can be activated via MAN Now Adaptive cruise control ACC Stop & Go, distance-regulated Speed limiter, adjustable, limiter (engine regulation) Emergency brake assistant EBA Plus Lane departure warning system LDW Lane change assist LCS and turning assist Attention warning system MAN AttentionGuard, cannot be switched off Traffic sign recognition MAN Media System Professional Navigation 12.3 inches MAN Sound System Advanced with subwoofer Fifth wheel coupling JOST JSK 38 C 3.5 inches Trailer coupling on double lock crossmember below, ROCKINGER Type 56 E Drawbar coupling for heavy loads, on mounting plate vehicle front (with cover) Roof railing, stainless steel, for GX, GM and TM cabs 4 long-range headlights LED, rectangular, on roof railing Gedpfxez Rr R Es Akyobu Heavy-duty semi-trailer tractor unit Top coat paint, cab: TRAFFIC WHITE RAL 9016

Condition: excellent (used), Year of construction: 1998, control type: CNC control, controller model: SIEMENS TOUCH, number of rollers: 3, overall weight: 15,000 kg, total length: 2,600 mm, total width: 2,200 mm, total height: 2,300 mm, Profile bending machine FACCIN - RCMI 180 MACH-ID 9828 Make: FACCIN Type: RCMI 180 Control: SIEMENS TOUCH Gbjdpjz Iwy Sefx Akysu YOP: 1998 Power 30 kw Hydraulic side supports 3 roll driven  Touchscreen SIEMENS Panel with S7 SPS  Laser measuring device for Radius  Set Universal rolls hardned Set Tool points  Horizontal and vertical:Horizontal Shaft Ø: 190mm Number of rolls: 3 Stroke X-Axis: 500mm Resistance moment: 360CM³ Working speed: 2000 - 5000mm/min. Length: 2600mm Width: 2200mm Height: 2300mm Weight: 15000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, mileage: 700 km, power: 353 kW (479.95 HP), first registration: 12/2025, fuel type: diesel, axle configuration: 8x8, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, Year of construction: 2025, Equipment: AdBlue, Apple CarPlay, Bluetooth, EBS, air conditioning, central locking, electric window regulation, electronic stability program (ESP), navigation system, onboard computer, spoiler, traction control, trailer coupling, - 4x4 - Heated mirrors - Leaf spring suspension - Roof spoiler - High beams - Low noise - Air-suspended seats - PTO EUROMIX TO GO – immediately available new vehicles from stock in Porta Westfalica. Completely assembled, directly from the manufacturer – ideal for short-term capacity expansion or replacement investment. Price negotiable – please contact us. MAN TGS 35.480 BB 8X8 EuromixMTP 3-way tipper First registration date: 12/2025 700 km Vehicle equipment: Diesel engine MAN D2676 LFAY, 353 kW (480 hp) power, 2,450 Nm torque, Euro 6e MAN TipMatic 12.28 OD - MAN TipMatic Offroad, -TipMatic Efficiency 300 l fuel tank - 35 l AdBlue tank High-performance engine brake MAN EVBec, adjustable MAN EasyStart hill start assist Front axle tires Continental 385/65R22.5 CROSS TRAC HS3 XL steering + guide Rear axle tires Continental 315/80R22.5 CROSS TRAC HD3 drive + guide TL Trailer coupling on end cross member, ROCKINGER Type 500 G 6B Rear axle, 13,000 kg, AP axle - Front axle, 9,200 kg Differential locks on driven rear axles Suspension type leaf/leaf (BB) on front axles and driven rear axles Bumper, steel, 3-piece Sun visor, in front of windshield Windshield wiper operation, automatic, with rain sensor (rain sensor wiper) Gbjdpfx Akezmp Egoyeu Daytime running light, LED - High beam assistant - Work lights on the rear of the cab Exterior mirrors, electrically adjustable, heated Driver comfort seat, air-suspended - Armrests driver seat Multi-function steering wheel, height and inclination adjustable Preparation for toll collection system Toll Collect Tachograph, digital, with remote communication (according to DSRC), CONTINENTAL Color scheme Moon Grey for cab interior Air conditioning, manual Lift roof, mechanical - Rear wall of cab, with window Tipper equipment: EuromixMTP three-way tipper EMK3 - 14m³ - Type: EuromixMTP EMK3 Description of the tipper body: Length: 5,900 mm Width: 2,410 mm Side walls: 900 mm Front wall: 1,100 mm Floor: 6mm HARDOX 450 Side walls: 5mm HARDOX 450 right: manually pivoting side wall Rear wall: automatically pivoting 6mm HARDOX 450 Rear wall: 6mm S355 Hydraulics: - Penta tilting cylinder with end stop, - Control block (main valve) - pneumatic tilting actuator - pneumatic switching valve on auxiliary frame - pump and oil tank Extra tipper equipment: Hydraulic connection for tipper trailer EuromixMTP hydraulically operated side wall on the left Folding lashing eyes Your advantages • Immediately ready for use: concrete pumps, concrete mixers, tippers, roll-off tippers • Chassis, body and assembly from a single source • Fair prices • Financing in 19 countries in Europe • Trade-in of your used vehicle Your contact persons • Denis Omeragic: German, English, Bosnian, Croatian, Serbian • Henri Omeragic: (German, Bosnian, Croatian, Serbian) • Harun Cevik: (German, English, Turkish) • Jamila Azzi: (French, Arabic) • Olga Tissen: (German, Russian) • Karolina Cyburt: (Polish) EuromixMTP GmbH, Gänsekamp 7, 32457 Porta Westfalica

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, screw conveyor diameter: 90 mm, screw conveyor length: 1,800 mm, KraussMaffei Berstorff VacGE90KS x 20D cold feed rubber extruder, 90mm – manufactured in 2012, with vacuum degassing. For sale is a fully functional cold feed rubber extruder from the premium brand KraussMaffei Berstorff. The extruder was used in a technical center and was never used in production. The machine rotates freely and is in very good optical condition. Technical data: - Manufacturer: KraussMaffei Berstorff GmbH, Hanover - Type: VacGE90KS x 20D - Order No.: 90202258 / Item No. 1000 - Year of manufacture: 2012 - Screw diameter: 90 mm - Processing length: 20 L/D (1800 mm) - Feeding: KS - cold feed with driven feed roller - Degassing: Vac - vacuum degassing with vacuum pump, filter unit, and vacuum meter (see photo) - Drive: Baumüller Nürnberg DC motor, approx. 55 kW, No. R906293 - Heating: Electric, multiple zones with cooling - Control: Siemens control panel with OP panel (extendable) - Dimensions: approx. 4000 x 1200 x 1600 mm - Weight: approx. 3500 kg Scope of delivery: Extruder complete as shown in the pictures, including vacuum pump, filter, vacuum meter, control panel, heaters, and drive cabinet. Without die head, without downstream equipment. Location: 84405 Dorfen, Germany Loading by forklift. Gsdoz Rkkdopfx Akyebu Export documents can be prepared by us. Delivery possible by arrangement.

Condition: ready for operation (used), Year of construction: 2023, spindle speed (max.): 6,000 rpm, travel distance X-axis: 200 mm, travel distance Y-axis: 102 mm, travel distance Z-axis: 406 mm, spindle motor power: 11,200 W, number of axes: 3, This 3-axis HAAS ST-10Y was manufactured in 2023. It features a maximum cutting diameter of 11.00 in and a maximum cutting length of 16.0 in. The machine is equipped with a 12-station turret and offers rapid movements of up to 1200 ipm on the Z-axis. If you are looking to get high-quality turning capabilities, consider the HAAS ST-10Y horizontal turning machine we have for sale. Contact us for further details. • Working Hours: 0 • Showroom Machine • Chuck Size: 6.5 in / 165 mm • Max Part Swing: 16.5 in / 419 mm • Max Cutting Diameter: 11.00 in / 279 mm (with BMT45 turret) • Max Cutting Length: 16.0 in / 406 mm • Bar Capacity: 1.75 in / 44 mm • Rapids on X: 472 ipm / 12.0 m/min • Rapids on Y: 472 ipm / 12.0 m/min • Rapids on Z: 1200 ipm / 30.5 m/min • Max Thrust X: 2400 lbf / 10676 N • Max Thrust Y: 2300 lbf / 10231 N • Max Thrust Z: 3700 lbf / 16458 N • Spindle Nose: A2-5 • Spindle Max Torque: 75.0 ft-lbf @ 1300 rpm / 102.0 Nm @ 1300 rpm • Draw Tube Bore ø: 1.81 in / 46 mm • Spindle Bore ø: 2.31 in / 58.7 mm • Main Spindle C Axis Max Speed: 60 rpm • Main Spindle C Axis Positioning: ± 0.02° • Sub-Spindle Chuck Size: 5.3 in / 135 mm • Sub-Spindle Max Speed: 6000 rpm • Tailstock Taper: MT3 • Tailstock Hydraulic Quill Travel: 3.8 in / 95 mm • Turret Stations: 12 Stations (BMT45) • Live Tooling Max Speed: 4000 rpm • Coolant Capacity: 30 gal / 114 L • Air Required: 4 scfm @ 100 psi / 113.0 L/min @ 6.9 bar • Shipping Weight: 7900 lb / 3584.0 kg Additional equipment • Robot Package Max Load Capacity at Wrist: 15.4 lb / 7 kg • Robot Package Reach: 35.9 in / 911 mm • Robot Package Repeatability: 0.0004 in / 0.010 mm • Robot Single Gripper Max Part Weight: 7.9 lb / 3.6 kg • Robot Dual Gripper Max Part Weight: 5.0 lb / 2.3 kg per gripper Gjdpfx Aez Nz T Hskyebu Technical Specification Counter Spindle Yes Driven Tools No

Condition: used, Year of construction: 2016, Used machine Year of manufacture: 2016 Equipment and technical data: - Electrics 3x400V 50 / 60Hz - Gimbal-mounted 5-axis electrospindle 12 kW (S6) HSK F63 - 24,000 rpm - ceramic bearings incl. liquid cooling with infinitely height-adjustable extraction hood - electric-motor controlled Gbedpfx Aszlbpbokyeu - full rated power at approx. 12,000 rpm - speed: 1000 - 24000 rpm - drive: 3-phase HF motor, inverter-controlled - direction of rotation: clockwise/counter-clockwise - 2 controlled compressed-air connections - interface for aggregates - tool weight (rotating): 6 kg - max. saw blade Ø 350 - spindle cooling: liquid cooling - extraction hood infinitely variable - Profit H350 16.30: CNC machining centre in gantry design (without tool) with digital drives (driven on both sides). The machine column of the Profit H350 16.30 is made of thick-walled, electrically welded rectangular tubes. The steel ribbing inside the column achieves high stability. - Machining field H350 16.30: Travel of the axes: X = 4000 mm Y = 1970 mm Z = 455 mm Working field: X = 3000 mm Y = 1500 mm Z = 150 mm clearance height Axis positioning speeds: depend on the selected safety system (these can be found in the layout). - Travelling gantry driven on both sides - Guide system X axis: The travelling gantry of the X axis is driven via a rack with inclined, crowned tooth form - This guarantees highest precision. The reduction gear ensures highest machining quality and repeat accuracy. The bearing is provided by means of encapsulated recirculating-ball shoes running on hardened and ground linear guides. - Guide system Y axis: The bearing is provided by means of encapsulated recirculating-ball shoes running on hardened and ground linear guides. The Y axis is positioned by means of a ground recirculating ball screw. - Guide system Z axis: The bearing is provided by means of encapsulated recirculating-ball shoes running on hardened and ground linear guides. The Z axis is positioned by means of a ground recirculating ball screw. - Automatic central lubrication: The grease is delivered in a controlled manner to the guide carriages of the X, Y and Z axes as well as to the recirculating ball screws in Y and Z. The lubrication process is carried out automatically after a specified time. - 12-position linear tool changer on the left of the machine column incl. a pick-up position for aggregates: The 12-position linear changer ensures shortest changeover times and offers sufficient space for milling tools. One aggregate change position (fitting variants see layout) Max. tool diameter 250 mm Max. tool length 240 mm - Drilling head DH 18 6H 1S: Vertical 12 spindles: 7 spindles in the X direction and 5 spindles in the Y direction. Horizontal 6 spindles: 4 spindles in the X direction and 2 spindles in the Y direction. Forward stroke = 70 mm max. drill length = 70 mm and shank D = 10 mm. All spindles are individually driven and selectable. 1 grooving saw – in the X direction max. saw blade diameter 120 mm max. blade thickness 5 mm max. speed infinitely variable up to 7500 rpm. The drilling group covers the entire working field both horizontally and vertically. - Controlled central extraction connection: Via the program control, either the drilling head or the milling spindle is extracted. This controlled slide gate achieves an optimised extraction performance. Connection diameter see layout - 6 workpiece supports: With front and rear...

Condition: used, Year of construction: 2011, Overview This Krones AirCo is an air conveyor for empty PET bottles, built at the end of 2011. The bottles hang by their neck ring and are driven by air from fan units along the conveyor. The installation runs over a total length of approx. 60 m with seven fan units, curves, a diverter and several declining sections. The conveyor sections hang from stainless steel support stands and run at ceiling level across the hall, so the floor beneath stays free for traffic and other machines. Technical data - Manufacturer: Krones - Model: AirCo - Year of manufacture: 2011 - Machine type: air conveyor, neck handling of empty PET bottles - Total conveyor length: approx. 60 m - Declining sections: 10 sections at 10°, approx. 16.8 m in total - Curves: 8 with radius 750 mm - 90° 2 x left, 2 x right; 45° left; 30° left; 15° left; 15° right - Fan units: 7, each with filter housing - Diverter: 1 Conveyor sections In the order of the plant layout: - Fan unit - Straight section 3,500 mm - Straight section 500 mm - Curve 45° left, radius 750 mm - Straight section 400 mm - Straight section 2,000 mm - Straight section 2,000 mm - Fan unit - Straight section 2,000 mm Gjdoz I Tbrjpfx Akysbu - Straight section 1,000 mm - Straight section 400 mm - Straight section 300 mm - Curve 30° left, radius 750 mm - Straight section 2,000 mm - Straight section 600 mm - Straight section 400 mm - Curve 15° left, radius 750 mm - Straight section 1,500 mm - Straight section 600 mm - Straight section 500 mm - Fan unit - Straight section 1,500 mm - Curve 15° right, radius 750 mm - Straight section 2,000 mm - Straight section 500 mm - Straight section 600 mm - Declining section 2,000 mm at 10° - Declining section 1,500 mm at 10° - Declining section 2,000 mm at 10° - Declining section 2,000 mm at 10° - Declining section 1,500 mm at 10° - Straight section 1,500 mm - Curve 90° left, radius 750 mm - Straight section 1,500 mm - Fan unit - Straight section 2,000 mm - Straight section 2,000 mm - Straight section 400 mm - Straight section 750 mm - Curve 90° right, radius 750 mm - Straight section 750 mm - Straight section 400 mm - Fan unit - Declining section 2,000 mm at 10° - Declining section 750 mm at 10° - Declining section 2,000 mm at 10° - Declining section 1,000 mm at 10° - Declining section 2,000 mm at 10° - Fan unit - Straight section 1,000 mm - Diverter - Curve 90° left, radius 750 mm - Fan unit - Straight section 2,000 mm - Straight section 750 mm - Curve 90° right, radius 750 mm - Straight section 1,500 mm - Straight section 720 mm Equipment - Stainless steel conveyor channels with neck guide rails - Stainless steel support stands and ceiling suspensions - Fan units with air filters - Sensors and pneumatic components along the conveyor - Plant layout drawing of the installation Condition Used, currently installed in the plant. The bottle unscrambler visible in some photos is not included. Dismantling and the exact scope of delivery are agreed during the offer stage. Availability Available immediately. Location: Germany.

Condition: ready for operation (used), Year of construction: 1998, operating hours: 35,626 h, spindle speed (max.): 3,000 rpm, number of axes: 2, Horizontal turning machine manufactured in 1998. This Weiler E35 features a center distance of 950 mm and a swing over bed of 410 mm. It has a spindle bore of 54 mm and a maximum torque at spindle of 700 Nm. If you are looking to get high-quality turning capabilities, consider the Weiler E35 machine we have for sale. Contact us for further details. Center distance: 950 mmCenter height: 200 mmSwing over bed: 410 mmSwing over cross slide: 200 mmCross slide travel: 230 mmCarriage guide length: 480 mmSpindle nose: DIN 55025 size 6Spindle bore: 54 mmSpindle taper: Morse taper 6Drive power (100% / 60% duty): 7.5 / 9 kWMaximum torque at spindle: 700 NmSpeed range: 1–3000 rpmSpeed range gear stage I: 1–750 rpmSpeed range gear stage II: 4–3000 rpmTailstock quill diameter: 65 mmTailstock quill travel: 120 mmTailstock taper: Morse taper 4Tool system: Parat size 2Control: D2Number of axes: 2 (X, Z)Included as accessories are a second-hand 200 mm three-jaw chuck, a coolant tank complete with pump, and six machine feet. The tooling system also includes a tool holder cassette.A test report from Weiler is available. Technical Specification Gbedpfxsy Axu Se Akysu Counter Spindle No Driven Tools No

Condition: used, Second-hand machine Features and technical specifications: - heavy-duty cast iron construction - Motor: 5.5 kW - Spindle diameter: 30 mm - 2900–4400–6000–7800–10,000 rpm - Height and swivel adjustment: electrically driven - Fine adjustment: via handwheel Gsdpjzk N R Dsfx Akyebu - with Panhans metal stop jaws - with Holz-Her 3-roller feed mechanism Availability: at short notice Storage location: 63934 Röllbach

Condition: excellent (used), HOLZ-HER Auriga 1308 XL edge banding machine - used PC control with screen, Touchscreen, Swiveling control panel, Program memory, Automatic adjustment of pressure beams, Feed via transport chain, Workpiece support can be extended, Diamond flush trimming cutter in both forward and reverse rotation, Strip magazine, Standby function, Glu Jet cartridge system, Cartridge system with sensing nozzle, Use of PUR adhesives possible, Gluing unit with driven roller, Pneumatic control of the gluing unit, Miter saw with 2 high-frequency motors, Miter saw pneumatically swiveling, Flush/radius milling unit, Motorized positioning control for milling unit, Milling tools with diamond coating, Air nozzle on the milling unit, Corner copying unit with diamond-coated cutter, Radius draw blade with motorized positioning, Air nozzle on the radius draw blade, Process-controlled surface draw blade, Air nozzle on the surface draw blade, Spray device for release agents, Spray device for cleaning agents, Edge trimming unit ----- Technical data ----- Gedpfx Asy T D N Askyebu Edge thickness, roll material: 3 mm, Edge thickness, strip material: 5 mm, Workpiece thickness: 60 mm, Min. workpiece length: 160 mm, Feed speed: 10 m/min, Distance workpiece support: 480 mm, Support plate Ø for edge material: 800 mm, Cutting blade for roll material up to: 3 mm, Heating time: 3.5 min, Power of flush trimming cutter: 0.8/1.2 kW, Power of miter saw: 2x0.45 kW, Power of milling station: 2x0.65 kW, Power of corner copying: 0.3 kW, Power of edge trimming: 2x0.09 kW, Extraction port Ø flush trimming unit: 2x80 mm, Extraction port Ø miter saw: 2x70 mm, Extraction port Ø milling unit: 100 mm, Extraction port Ø draw blade unit: 120 mm, Compressed air connection: 6 bar, Overall length: 5,000 mm, Dimensions (LxWxH): 5,000x1,250x1,720 mm, Weight: 1,300 kg Quality information: - All settings checked - Adjusted according to manufacturer's specifications - New heater - Cartridge system checked for leaks - Complete basic inspection - Complete basic cleaning - Electrical system checked - Pneumatics checked - Ready for immediate use

Condition: good (used), mileage: 291,248 km, power: 105 kW (142.76 HP), first registration: 09/2021, fuel type: diesel, tire size: 235/65R16, axle configuration: 4x2, wheelbase: 3,670 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, number of gears: 6, emission class: euro6, suspension: steel, number of seats: 1, total length: 6,250 mm, total width: 2,120 mm, total height: 3,030 mm, loading space length: 3,550 mm, loading space width: 1,750 mm, loading space height: 2,190 mm, Year of construction: 2021, Equipment: ABS, Apple CarPlay, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, navigation system, power mirror, traction control, = Additional Options and Accessories = - Heated mirrors - Halogen lamp - None - Air conditioning - Manual - Radio/cassette - Reversing camera - Fabric - Partition = Notes = Configuration: 4x2, Tare weight: 2726 kg, Gross vehicle weight: 3500 kg, Cab type: Single cab, Cruise control, Number of airbags: 1, Parking assistance: None, Electric windows, Electric mirrors, Partition, Radio/cassette, Carplay, GPS navigation, Color: White, Heated mirrors, Reversing camera, Lighting type: Halogen lamp, Air conditioning, Bluetooth, Engine power: 105 kW (141 hp), Engine displacement: 2143 cc, Fuel: Diesel, Euro: 6, Drive technology: Timing chain, Transmission type: Manual, Gears: 6, Power steering, ABS, ASR, Starter battery, Body type: Extended, Rear step, Roof rack: None, Side doors: 2, Rear closure: Double door, Central locking, Number of seats: 1, Seat cover: Fabric, Seat adjustment: Manual, Refrigeration unit manufacturer: Carrier, Refrigeration unit: Cooling compressor, Body insulation, Type of cooling: Cooling, Day/night cooling: Day cooling, Refrigerated van FRIGO Airco Carrier, Euro6, Export!, Tire type: All-season tires = Further Information = Gbsdpfx Akezylibeyeu General information Number of doors: 2 License plate: KLEYN1 Axle configuration Tire size: 235/65R16 Brakes: Drum brakes Suspension: Leaf spring suspension Axle 1: Tire tread depth left: 3 mm; Tire tread depth right: 2 mm Axle 2: Tire tread depth left: 3 mm; Tire tread depth right: 2 mm Weights Unladen weight: 2,726 kg Payload: 774 kg GVW: 3,500 kg Functional Loading area height: 77 cm Refrigeration unit: engine-driven Condition Technical condition: good Optical condition: good Damage: none Number of keys: 2 Financial information Leasing price: €210 per month (van, 72 months); Ask for more information and conditions.

Year of construction: 2015, condition: excellent (used), Ref: 11161 . 2015 Pack-Smart IPF 30-27-4 Integrated Finishing System Ideal for direct mail, gift card and security packaging, media packaging, tipping, windowing, folding, gluing and other specialist print-finishing applications. Equipped with: Rotary vacuum paper feeder Precision product alignment & registration Dual servo-driven vacuum transport conveyors Twin-head hot melt glue system Servo-driven cold glue pattern system Scoring / perforating module Front fold tooling 3 x plow fold stations Turnover / straight-through module Transfer conveyor Shingled delivery conveyor 10-axis servo control system 10" colour touchscreen HMI Recipe storage & recall Integrated vacuum system Interlocked safety guarding Specification: Maximum production speed: 12,000 products per hour Maximum conveyor speed: 122 m/min Carrier size: 102–762 mm wide x 102–813 mm long Stock: 145 gsm up to 0.86 mm thickness Secondary rotary pick & place feeder Secondary product size: 54 x 54 mm to 150 x 150 mm Gbsdpfxjz Iz Sfs Akyeu Secondary feeder speed: up to 500 products/min Electrical: 230V / 3Ph Air requirement: 4.1–7 bar

Condition: ready for operation (used), Year of construction: 2020, travel distance X-axis: 285 mm, travel distance Z-axis: 1,000 mm, number of axes: 2, Horizontal turning machine manufactured in 2020. This JESSEY MJ1840 features a swing over bed of 460 mm and a distance between centres of 1000 mm. It is equipped with an 80 mm spindle bore and a D1-8 Camlock spindle nose. If you are looking to get high-quality turning capabilities, consider the JESSEY MJ1840 machine we have for sale. Contact us for further details. - Compound Rest Travel: 120 mm- Swing Over Bed: 460 mm (18")- Swing Over Cross Slide: 285 mm- Distance Between Centres: 1000 mm (40")- Spindle Bore: 80 mm- Spindle Nose: D1-8 Camlock- Tailstock Total Travel: 170 mm- Accessories / Equipment: Quick-change tool post / 4-way tool post, chip pan/tray, chuck guard, splash guard, coolant device Technical Specification Counter Spindle No Gedpfx Akjz Nkkujysbu Driven Tools No

Year of construction: 2014, condition: ready for operation (used), travel distance X-axis: 1,130 mm, overall weight: 58,000 kg, total width: 2,100 mm, total height: 2,400 mm, product length (max.): 4,445 mm, table length: 500 mm, table load: 1,000 kg, table width: 1,000 mm, number of axes: 3, This 3-axis Kent KOS-510V.MA2 surface grinding machine was manufactured in 2014. It features a table working area of 1000 x 500 mm and a maximum table load of 1000 kg. The grinding spindle speed reaches 1450 rpm, and the machine includes a servo-controlled automatic downfeed for high-precision microfeed. If you are looking to get high-quality grinding capabilities, consider the Kent KOS-510V.MA2 machine we have for sale. Contact us for further details. Gbsdpfxoz Nlc Sj Akyou - Grinding Length: 1000 mm- Grinding Width: 500 mm- Maximum Distance Table Surface to Spindle Center: 550 - 590 mm- Maximum Table Load (including magnetic clamping plate): 1000 kg- Grinding Wheel Dimensions: 355 x 38 x 127 mm (or 355 x 40 x 127 mm)- Grinding Spindle Speed: 1450 rpm- Main Spindle Motor Power: 5.5 kW- Vertical Axis (Y/Z): Servo-controlled automatic downfeed with high-precision microfeed (resolution up to 0.001 mm)- Cross Travel / Feed: Driven via ball screw with electronic handwheel (MPG knob) / programmable reversing points- Table Travel: Hydraulic longitudinally driven with continuously adjustable table speed (approx. 5–25 m/min)- Guide System: Flat guide ways with automatic central lubrication- Optional Equipment / Accessories: External mobile control console panel, table splash guards and rear guard, electromagnetic clamping table, separate hydraulic unit, balancing arbor/device, level alignment screws

Condition: used, Year of construction: 2004, Technical details: faceplate diameter: 4770 mm swing diameter: 7000 mm turning height: 1000 mm slide stroke: 1000 mm workpiece weight max.: 100000 kg faceplate turning speed range: 2 - 20 U/min feed speeds: 1 - 10000 mm/min rapid traverse: 10 m/min ram head dimension: 250 x 250 mm main drive: 100 kW total power requirement: 200 kW with CNC SIEMENS 840 D 2 Vertical Supports with toolchanger 12 pockets C-axis and driven tooling SK 50 37 Kw 3000 rpm Chip conveyor and coolant attachment Godpfx Asvb Hlwskyjbu *

Condition: ready for operation (used), Year of construction: 2025, spindle speed (max.): 2,400 rpm, travel distance X-axis: 508 mm, travel distance Y-axis: 152 mm, travel distance Z-axis: 711 mm, spindle motor power: 29,800 W, overall weight: 9,253 kg, number of axes: 4, This 4-axis HAAS ST-40SY was manufactured in 2025. It features a maximum part swing of 35.5 in and a maximum cutting diameter of 27.5 in. The machine is equipped with a 12-station turret and live tooling capabilities, allowing for versatile machining operations. If you are looking to get high-quality turning capabilities, consider the HAAS ST-40SY horizontal turning machine we have for sale. Contact us for further details. • Working Hours: 0 • Showroom Machine • Chuck Size: 15.0 in / 381 mm • Max Part Swing: 35.5 in / 902 mm • Max Cutting Diameter (with BMT75 turret): 27.50 in / 699 mm • Max Cutting Length: 28.0 in / 711 mm • Bar Capacity: 4.00 in / 102 mm • X Axis Rapids: 472 ipm / 12.0 m/min • Y Axis Rapids: 472 ipm / 12.0 m/min • Z Axis Rapids: 710 ipm / 18.0 m/min • Max Thrust X: 5500 lbf / 24465 N • Max Thrust Y: 2300 lbf / 10231 N • Max Thrust Z: 9000 lbf / 40034 N • Spindle Nose: A2-8 • Drive System: 2-Speed Gearbox • Spindle Max Torque: 1400.0 ft-lbf @ 150 rpm / 1898.0 Nm @ 150 rpm • Spindle Bore ø: 4.62 in / 117.3 mm • XP Option Drive System: 2-Speed Gearbox • XP Option Max Rating: 55.0 hp / 41.0 kW • XP Option Max Speed: 2400 rpm • XP Option Max Torque: 2100.0 ft-lbf @ 150 rpm / 2847.0 Nm @ 150 rpm • Main Spindle C Axis Max Rating: 5.0 hp / 3.7 kW • Main Spindle C Axis Max Speed: 49 rpm • Main Spindle C Axis Positioning: ± 0.01 ° • Main Spindle C Axis Brake Diameter: 21.5 in / 546 mm • Main Spindle C Axis Brake Holding Torque: 450 ft-lbf / 610 Nm • Tailstock Taper: MT5 • Tailstock Travel: 26.0 in / 660 mm • Tailstock Max Thrust (Acme): 3,000 lbf / 13,345 N • Tailstock Min Thrust (Acme): 200 lbf / 890 N • Turret Number of Tools: 12 Stations • Turret Index Time (one tool): 2 s • Turret Tooling: BMT75 • Live Tooling Max Speed: 4000 rpm • Live Tooling Tooling: BMT75 • Coolant Capacity: 95 gal / 360 L • Air Requirements: 4 scfm @ 100 psi / 113.0 L/min @ 6.9 bar • Inline Air Hose: 3/8 in • Air Pressure Min: 80 psi / 5.5 bar • Input AC Voltage (3 Phase) - Low: 220 VAC • Full Load Amps (3 Phase) - Low: 70 A (Standard) / 105 A (XP Option) • Input AC Voltage (3 Phase) - High: 440 VAC • Full Load Amps (3 Phase) - High: 35 A (Standard) / 53 A (XP Option) • Domestic Pallet Dimensions: 217.0 in x 95.0 in x 116.0 in / 551 cm x 241 cm x 295 cm • Export Crate Dimensions: 217.0 in x 95.5 in x 120.5 in / 551 cm x 243 cm x 306 cm • Export Crate Weight: 22,141 lb / 10,043.0 kg Additional equipment • Chip conveyor Gsdpfx Ajz Nx Rcskysbu • Remote jog handle / CNC control pendant • Auto-door feature • Eppinger Preci-Flex live tooling holders • Samchully 3-jaw chuck • Tool setter / touch probe • Coolant/air blow hose Technical Specification Counter Spindle No Driven Tools Yes

Condition: used, Used GEA Westfalia CSA 160-47-076 separator centrifuge. Working speed of bowl up to 6800 rpm. Maximum temperature up to 100°C. Machine is driven by Atex rated electric motor 30 kW, 50 HZ. Also includes tools. Gbsdpfozvychsx Akysu

Condition: as good as new (ex-display), Year of construction: 2026, machine/vehicle number: AB00041292, functionality: fully functional, power: 7.5 kW (10.20 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, overall weight: 950 kg, Equipment: CE marking, documentation/manual, saw blade guard, Circular saw with a tilting saw blade, compliant with European safety standards and equipped with a motor braking system. Gsdpfx Aoz Rmu Eekysbu Features: Independently driven scoring unit Ready 3 UP Plus version (3 axes), suitable for CE and USA/Canada Sliding carriage of 3200 mm Miter gauge with digital display of the position of the 2 stops

Condition: excellent (used), Year of construction: 2015, MAZAK QUICK TURN SMART 250ML 1000U Max. turning diameter: 360 mm Max. machining length: 1,024 mm Max. milling speed: 4,500 rpm Max. spindle speed: 4,000 rpm Max. bar diameter: 80 mm Machine is equipped with: Gedpfx Aszy Um Aekysbu - CNC control: Mazatrol Smart - KITAGAWA 3-jaw chuck BB-210, diameter 254 mm - Tool Eye - C-axis - Interface for bar loader magazine - Automatic parts catcher - NC tailstock - Reinforced coolant pump - Chip conveyor, discharge to the side - 8 pcs. fixed tool holders - 2 pcs. driven tool holders

Condition: good (used), Year of construction: 1969, max. sheet width: 2500 mm Convexity length of rollers: 2700 mm Gedsz Rn Aqepfx Akysbu max. sheet thickness (St 50): 32 mm max. sheet thickness (St 34): 39 mm min. sheet thickness (St 50): 8 mm number of straightening rollers: 7 rollers number of driven straightening rollers: 5 rollers diameter of straightening rollers: 290 mm diameter of input/output straightening rollers: 345 mm number of support rollers: 13 diameter of support rollers: 288 mm stroke of upper beam: 120 mm Straightening speed: 16 m / min Rated power of main drive: 90 kW Total load: 138 kW

Condition: excellent (used), Fully automatic pallet wrapper with film pre-stretch Inventory No. 3971 Manufacturer: Mustang Type: T 7 ECO * Year of manufacture: 2018 * Turntable positioning via fixed stop * Number of bottom and top wraps * Turntable diameter: 1650 mm Gbodpfx Ajz Rq R Rskyeu * Max. wrapping height: approx. 2700 mm * Weight: approx. 500 kg * In very good condition * Suitable for Euro pallets and block pallets