Used Polyp Attachment for sale (5,195)

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, sheet thickness (max.): 3 mm, working length: 2,500 mm, TECHNICAL DETAILS Crsdezv Rc Sspfx Albjg Sheet thickness with tensile strength of 410 N/mm² max.: 2.00 mm Sheet thickness with tensile strength of 600 N/mm² max.: 1.25 mm Sheet thickness with tensile strength of 265 N/mm² max.: 3.00 mm Minimum sheet thickness: 0.50 mm Length of the notched plate at the inlet max.: 2,700 mm Width of the notched plate at the inlet max.: 1,500 mm Rotatable diagonal of the notched plate max.: 2,700 mm Bending length max.: 2,500 mm Clearance for bending above the work table max.: 127 mm MACHINE DETAILS Processor: Intel Pentium III, 500 MHz RAM: 128 MB SDRAM Graphics memory: 4 MB SGRAM Hard disk capacity: 9.1 GB CD-ROM drive: 600 MB Floppy disk drive: 3.5 inch, 1.44 MB Network cards: 2 Screen diagonal: 17 inches Voltage: 400 V Frequency: 50 Hz Number of phases: 3 Rated power: 38 kW Rated current: 64 A Switching capacity of the main switch: 40 kA Further technical details can be found in the attached documents.

Condition: used, Year of construction: 2004, operating hours: 28,082 h, travel distance X-axis: 800 mm, travel distance Y-axis: 620 mm, travel distance Z-axis: 520 mm, controller model: Siemens 840 D, spindle speed (max.): 13,000 rpm, The control unit (PCU 50) was replaced in March 2024! The machine spindle was replaced at approximately 5,500 operating hours! Tools are included in the offer! TECHNICAL DETAILS Travel range X-axis: 800 mm Travel range Y-axis: 620 mm Travel range Z-axis: 520 mm Spindle speed: 13,000 rpm Number of tool positions in the tool magazine: 30 MACHINE DETAILS Control unit: Siemens 840 D Operating hours Control unit operating hours: 60,150 h Machine operating hours: 56,860 h Spindle operating hours: 28,082 h Spindle replacement at: 5,500 h EQUIPMENT Tools 4th axis Hofmann RW/NC160 Oil mist extraction system Strip filter system with internal cooling 20 bar with double switching filter Documentation Hedelius + Siemens Sinumerik Infrared probe Renishaw Note: The sale does not include the milling attachments on the rear panel of the machine. Since the machine has been demonstrated several times, the machine operating hours may vary slightly. Codpfxszvl Tfj Albsrg

Condition: ready for operation (used), Year of construction: 2009, operating hours: 4,247 h, functionality: fully functional, machine/vehicle number: 655118, travel distance X-axis: 550 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 42,000 rpm, swivel angle A-axis (min.): -120 °, swivel angle A-axis (max.): 60 °, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item on time between September 21st and October 1st! TECHNICAL DETAILS Travel range X-axis: 550 mm Travel range Y-axis: 400 mm Travel range Z-axis: 400 mm Swivel angle A-axis: -120° to +60° Swivel angle C-axis: n x 360° Distance from HSK-E tool holder to table: 450 mm Clamping area: 650 x 800 mm Pallet dimensions for 4th and 5th axes: approx. 300 x 300 mm Spindle Spindle mounting: HSK-E 40 Spindle speed: 0 to 42,000 rpm Spindle power S1: 15 kW Spindle power S6: 17 kW Axes and Accuracy Drive type: Digital AC servo motors, fully synchronized Travel speed: max. 30 m/min Acceleration: max. 15 m/s² Repeatability: 0.002 mm Digital display: 0.001 mm or 0.0001 mm, selectable Nominal speed in NC axis operation A-axis: 40 min⁻¹ Nominal speed in NC axis operation C-axis: 40 min⁻¹ Tool Changer Type: Pick-up disc magazine Magazine slots: 32 MACHINE DETAILS Machine operating time: 484 d 11 h 24 min 06 s Spindle operating time: 4,246 h 55 min 36 s Type: 5-axis CNC machining center Connected load: 38 kVA Input voltage: 400 V AC, 3-phase, 50 Hz Control voltage: 24 V DC Fuses: max. 63 A Overall length: 3,300 mm Overall width: 2,200 mm Credpjzquprofx Albog Overall height: 2,300 mm Machine weight: 7,400 kg EQUIPMENT - Technical documentation and manual - Three spare pallets - HSK-E-40 tool holders - Pallets with attached specific fixtures External reference: Demo - Lot 1

Condition: used, total length: 4,750 mm, total width: 2,640 mm, total height: 2,030 mm, Colour: White Empty weight: 3.500 kg The Bauerrichter ESR-1 is a polisher designed for creating high-gloss surfaces on various materials. Below is a summary of its technical specifications: Technical Specifications: CharacteristicSpecificationElectric connection380 V, 20 kDimensions (L x W x H)5,600 mm x 2,400 mm x 2,100 mmWeightAbout 3,000 kgWork table dimensions1,350 mm x 3,200 mmMaximum workpiece height< 100 mmDiameter polishing rollerØ 400 mmFeed rateFrequency controlled Characteristics: Polishing unit:Moves over a fixed work table and is equipped with an inclined, oscillating polishing roller. The height and oscillation speed are infinitely adjustable. Polishing roller: Equipped with special 400 mm diameter polishing rings that ensure longer life and lower operating costs. Quick-change system: Allows easy and quick replacement of polishing rings, reducing set-up time. Workpiece attachment: Standard equipped with a quick clamping system; optional vacuum clamping system is available for faster and more comfortable operation. Construction: Robust welded precision work table with phenolic resin bonded film plates, resistant to heat, moisture and chemicals. Drive: High quality SEW electric motors with energy efficiency class EFF1 (IE2), known for their robustness and durability. This machine offers an efficient solution for polishing various materials and is designed with durability and ease of use in mind. - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 150610 - Number of units [pcs]: 2 - └ Unit 1: - - Position: Top - - Type of unit: Brush unit - - Number of brushes [pcs]: 1 - - Brush length [mm]: 1500 - - Brush diameter [mm]: 180 - - Motor power [kW]: 11 - └ Unit 2: Codewnhxdopfx Alberg - - Position: Top - - Type of unit: Brush unit - - Number of brushes [pcs]: 7 - - Brush length [mm]: 75 - - Brush diameter [mm]: 180 - Max. working width [mm]: 1440 - Max. passage height [mm]: 250 - Infeed table length [mm]: 5150 - Outfeed table length [mm]: 5150 - Voltage [V]: 400 - Transport dimensions: 4750mm x 2640mm x 2030mm (l x w x h) - Transport weight [kg]: 3500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Year of construction: 2014, condition: used, Year of manufacture: 2014 New: No Attachment suited for: Construction machines General condition: very good Technical condition: very good Visual appearance: very good Please contact Ernst van Hek for more information Engcon EC30 Tiltrotator (2014) with Integrated Gripper Boost the efficiency and versatility of your heavy excavator with this robust Engcon EC30 tiltrotator. Previously mounted on a Komatsu PC240, this unit comes equipped with the highly desirable integrated grapple cassette, making it a perfect all-around tool for demanding groundworks. Specifications & Features: Crsdpfx Aoylkg Dolbog – Make & Model: Engcon EC30 – Year of Manufacture: 2014 – Previous Machine: Komatsu PC240 (Suitable for excavators in the 22–33 ton weight class) – Upper Mounting: Fixed (Pin-on direct mount) – Lower Quick Coupler: S70 System – Additional Option Included: Integrated grapple cassette for easy handling of pipes, posts, and debris – Hydraulics: Complete with hoses and heavy-duty tilt cylinders as pictured Additional Attachments Available: Need matching tools? We also have a selection of buckets available in stock that are compatible with the S70 quick coupler system. Contact us to put together a complete package!

Condition: new, mileage: 1 km, color: yellow, tire condition: 100 %, drive condition: 100 %, chain condition: 100 %, axle configuration: 2 axles, number of seats: 1, emission class: euro5, Year of construction: 2025, Equipment: additional headlights, all wheel drive, cabin, Gunter Grossmann GG09 + KUBOTA EURO 5 The new Günter Grossmann GG09 Loader The Günter Grossmann GG09 loader (900 kg load capacity) is the brand-new machine from Günter Grossmann, a high-quality machine engineered for a European company. This loader delivers outstanding power and is capable of performing reliably under all working conditions. The loader is extremely user-friendly and comfortable to operate. The control panel is clearly laid out, intuitive, and straightforward. The cab is soundproofed, insulated, and equipped with heating. Additionally, the machine features a comfortable and elegantly glazed cabin, ensuring both safety and operator comfort even during long shifts. The loader is built with a highly durable and robust construction. It comes standard with a quick coupler, allowing for fast attachment changes without leaving the cab. Additional equipment available on request: (Excl. VAT) Standard delivery includes: GG09 loader + bucket + quick coupler Model 900 kg Specifications Model: GG09 Load capacity: 900 kg Engine: Kubota Euro 5 (V1505) Rated engine power: 24.47 HP Number of cylinders: 4 Rated speed: 2400 rpm Operating weight: 2300 kg WORKING RANGE Bucket volume: 0.5 m3 Load capacity: 900 kg Lifting height: 2750 mm MAIN DIMENSIONS Overall length (bucket on ground): 4037 mm Overall height: 2264 mm Overall width: 1446 mm WORKING RANGE Bucket volume: 0.5 m3 Crodpfxevuk U Ae Albjg Load capacity: 900 kg Lifting height: 2750 mm

Condition: new, functionality: fully functional, power: 18.39 kW (25.00 HP), gearing type: automatic, fuel type: diesel, color: yellow, overall weight: 1,520 kg, empty load weight: 1,520 kg, operation weight: 1,520 kg, maximum load weight: 600 kg, lifting power: 600 kg/m, tire size: 26x12.00-12, tire condition: 100 %, drive condition: 100 %, chain condition: 100 %, axle configuration: 2 axles, number of seats: 1, first registration: 07/2026, emission class: euro5, shovel volume: 0.3 m³, digging bucket width: 1,140 mm, Equipment: additional headlights, all wheel drive, Articulated loader GG06N – the new version of the GG06 series Modern design and even more functionality The GG06N articulated loader is the new generation of the popular GG06 series, designed for users who expect reliability, compact dimensions, and high work performance. The updated design goes hand in hand with an optimized construction, which proves to be excellent in construction work, in agriculture, and in municipal services. Powerful engine and proven technology The GG06N model is equipped with a 3-cylinder engine from the renowned Perkins brand with an output of 25 hp. This power unit offers an optimal combination of power and fuel efficiency, ensuring economical and sustainable operation. This is a solution designed for work under demanding conditions. Hydraulics and work performance The efficient operation of the attachments is provided by an Italian PWG hydraulic pump with a capacity of 36 l/min and a working pressure of 16 MPa. The loader offers a loading capacity of 600 kg and a bucket volume of 0.3 m³, making it ideal for daily loading and transfer operations. The maximum lifting height is 2.6 meters, which enables comfortable work at different heights. Compact dimensions and mobility Thanks to its dimensions of 3325 mm in length, 1155 mm in width, and 2360 mm in height, the GG06N remains extremely maneuverable and easy to operate. The low unladen weight of 1520 kg and the tire size 26×12.00-12 ensure stability and good grip, even on difficult terrain. Speed and versatility A maximum speed of 18 km/h enables quick movement around the work area, which significantly increases efficiency. The GG06N articulated loader is a versatile machine that combines compactness with great capabilities – ideal for professionals who value performance and reliability. Technical data Bucket volume 0.3 cbm Loading capacity 600 kg Machine weight 1520 kg Engine PERKINS Engine model PERKINS403J-11 Number of cylinders 3 Engine power 25 HP Hydraulic pump PWG Italy 36L per minute Hydraulic pressure 16 MPa Tire size 26x12.00-12 Lifting height 2.6 m Speed 18 km/h Cjdszifi Hepfx Alborg Length 3398 mm Width 1140 mm Height 2370 mm

Condition: used, Year of construction: 2009, travel -x axis 600 mm travel -y axis 450 mm travel -z axis 450 mm control HEIDENHAIN - iTNC 530 number of spindle speeds 18.000 U/min tool taper HSK-A63 numbers of positions in the tool changer 120 5-axis simultaneous machining center | HERMLE - C 20 U equipped with ITC (80 bar), NC swivel rotary table, 120-way tool changer & pallet changer. Crodpfoyy A N Uex Albog The machine is in a well-maintained condition. The machine videos from the production plant will be shared on request. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: C 20 | C20 | C-20 | C20U

Condition: used, faceplate diameter 4.000 mm travel -x axis 4.500 mm travel -z axis 600 mm control SIEMENS - 840 D sl feed range 0 - 8.000 mm/min turning speeds 1) 0,7 - 5,6 U/min turning speeds 2) 2,8 - 22,4 U/min turning speeds 2,1 - 56 U/min tool taper Sauter Facing Lathe | ZERBST - DP05/W08 Scope of delivery: - Chip conveyor - Hydraulic unit The ZERBST - DP05/W08 has been retrofitted in 2010. Cjdjywzxiopfx Alborg The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: DP05W08 | DP05 W08 | DP05-W08

Year of construction: 2018, condition: used, frequency 500 kHz Power 50 KW control SIEMENS - S7-200 Hardening Unit - Induction | SAET - 3RALA equipped with a FANUC Robot The machine is in very good condition. Cedpfx Aex Sznaolborg Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: 3 RALA |3-RALA

Condition: used, Year of construction: 2010, swing dia. 440 mm max. turning diameter 220 mm turning length 450 mm travel -x axis 200 mm control FANUC - 18i TB max. helix angle 60 ° spindle bore 64 mm tool taper VDI 30 numbers of positions in the tool changer 12 CNC Lathe | COLCHESTER - TORNADO T6MS equipped with counter spindle and chip conveyor. The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. Csdsvzcplspfx Alborg - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: T6 MS | T6-MS | T 6MS | T-6MS | T-6

Condition: used, Year of construction: 2006, centre height 175 mm centre distance 300 mm number of spindle speeds 2.000 - 8.000 control SIEMENS - 840 D machine weight ab. 7.500 kg surface area 1.000 x 270 mm number of T-slots 3 groove width 12 H7 mm flute distance 50 mm spindle diameter in front bearing 55 mm Crjdpfx Alsmd Didebeg Tool and Cutter Grinder | HAAS - MULTIGRIND AF1 Additional equipment: - Tool laser measuring system: Blum - Lasersystem MINI-MICRP-NANO The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: AF 1 | AF-1

Condition: used, Year of construction: 2019, operating hours: 10,214 h, lifting height: 7,960 mm, free lift: 2,710 mm, fuel type: electric, mast type: triplex, fork length: 1,200 mm, fork width: 940 mm, total height: 3,210 mm, total length: 2,150 mm, total width: 1,140 mm, color: silver, Empty weight: 4.050 kg Lifting capacity: 2.000 kg - Year: 2019 - Documentation available: Yes - └ Type Documentation: User manual - CE marking present: Yes - CE certificate present: No - Serial number: 516231V00661 - Operating hours: 10214 - Lifting capacity: 2000kg - Lifting height: 7960mm - Overhead clearance: 3200mm - Free lift: 2710mm - Fork length: 1200mm - Maximum fork width: 940mm - Minimum fork width: 240mm - Number of wheels: 4 Wheels - Attachment: Side-shift - Options: Full cabin, Non-marking tires, Camera, Joystick, Work lights, Radio, Free-lift, Heating - Mast: Triplex - Drive: Electric - Battery information: - └ Brand/Type: 6PzS750 - └ Battery year of construction: 2019 - └ Capacity: 750Ah Crodpozrdgpjfx Albeg - └ Battery voltage: 48V - └ Tray length [mm]: 825 - └ Tray width [mm]: 735 - └ Tray height [mm]: 630 - Transport dimensions: 2159mm x 1149mm x 3210mm (l x w x h) - Transport weight [kg]: 4050kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Koen van Lent

Condition: excellent (used), functionality: fully functional, Year of construction: 2020, machine/vehicle number: plate roll Faccin, control type: manual, degree of automation: manual, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 180 mm, roller (top) diameter: 200 mm, side roll diameter: 160 mm, roller diameter: 200 mm, roller length: 2,050 mm, working width: 2,000 mm, working height: 700 mm, sheet thickness (max.): 8 mm, sheet thickness steel (max.): 8 mm, sheet thickness stainless steel (max.): 8 mm, sheet thickness aluminum (max.): 10 mm, sheet thickness brass (max.): 12 mm, sheet thickness copper (max.): 12 mm, overall weight: 3,700 kg, total length: 3,500 mm, total width: 1,100 mm, total height: 1,000 mm, power: 5.52 kW (7.51 HP), input voltage: 400 V, input frequency: 50 Hz, number of digital displays: 3, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, PLATE BENDING MACHINE FACCIN - 4 ROLL HYDRAULIC 2000 X 8 MM MODEL 2020B4 year 2020 capacity 2000x8 mm Plate roll hydraulic linear guideways Machine in excellent working condition Bending capacity -Plate width : 2000 mm -Rolling plate thickness 8 mm - Prebend thickness 6 mm Rolls dimensions: -Useful length 2050 mm -Upper roll 200 mm -Lower roll 180 mm -Side rolls 160 mm Electric motor 5,5Kw Vac 400/50 • Hardening of the 4 rolls high strength surface • Central rolls driven with hydraulic motors and gear units • Conical bending attachment side rolls tiltable to form cones • Opening front hydraulic drop-end to unload the closed shell. Crjdpfezy Nv Ejx Albog • Variable speed working roll bending rotation hydraulic speed fast/slow. • Console electric on wheels with centralized commands joysticks and 3 digital readout. • Digital readouts of the rolls position bending and pre-bending repeatability. • Dimension 3500 x1100 x H 1000 mm - weight 3700kgs

Condition: new, NEW Electric heat plates suitable for most electric Teflon band grills (contact grills) such as GEA, CFS, Koppens, Square, etc ... in casted aluminium dimensions : 590 x 600 x 67 mm 15 kW - 3 x 400 V - 50 Hz stainless steel connection hood Credpfxjzy Nwcj Albsg stainless steel attachments

Condition: used, Control: FANUC 0i-TD YOM: 2014 B-axis Max: 830° X-axis Travel: 243 mm Y-axis Travel: 50 mm Z-axis Travel: 740 mm Chuck Dia 10” Max. Workpiece Diameter: 350 mm Spindle Speed: 4000 RPM Max. Bar passage: Ø 64 mm Tool turret: 12 positions Tool attachment: bmt-65 Sub Spindle chuck Dia 6” Sub spindle speed: 6–6000 rpm Spindle nose: a2-8 Sub spindle nose: a2-5 Complete with swarf conveyor Csdozy Iquopfx Alberg Machine Depth: 2080 mm Machine Weight: 9600 kg

Condition: used, Broadbent - Schofield Gap Bed Centre Lathe. Distance Between Centres Approx 5M (16ft). Swing Over Bed 35". Swing in Gap 55". Spindle Bore 4 1/2". Spindle Speeds 7 - 500rpm. Leadscrew 2 TPI. Taper Turning Attachment. Bison 800mm Diameter 4 Jaw Chuck. Fixed 3 Point Roller Bearing Steady. Crsdpfjzy Ipqsx Albog Digital Readout & Tooling & 2 Rear Splash Guards.

Condition: used, High Speed Elevating Rail Vertical Boring Machine with Power Indexing Turret & Copying Attachment. Four Jaw Chuck Size 48" Diameter. Table Swing 60" Diameter. Max Height Under Cross Slide 60" Turret Rise & Fall 36" Csdpfxszy Ik Is Albsrg Speeds 10.5 - 234 rpm With 4 Sets of Chuck Jaws, Equipment, Chuck Guards & Newall Digital Readout System.

Condition: used, operating hours: 2,488 h, lifting height: 6,930 mm, free lift: 2,330 mm, fuel type: diesel, mast type: triplex, fork length: 1,150 mm, fork width: 1,350 mm, total height: 2,940 mm, total length: 300 mm, total width: 1,450 mm, color: red, Empty weight: 7.150 kg Lifting capacity: 4.500 kg - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: H2X352N00989 - Operating hours: 2488 - Lifting capacity: 4500kg - Lifting height: 6925mm - Overhead clearance: 2940mm Cedpfx Alozy Ibasberg - Free lift: 2330mm - Fork length: 1150mm - Maximum fork width: 1350mm - Minimum fork width: 240mm - Number of wheels: 4 Wheels - Attachment: 3rd+4th valve to fork carriage - Options: Half cabin, Work lights, Free-lift - Mast: Triplex - Drive: Diesel - Motor brand: Perkins - Transport dimensions: 300mm x 1450mm x 2940mm (l x w x h) - Transport weight [kg]: 7150kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Koen van Lent

Condition: used, Year of construction: 2021, operating hours: 13,226 h, Type of fuel: Electric Colour: Red Empty weight: 3.318 kg Dimensions (LxBxH): 190 x 110 x 212 cm Lifting capacity: 1.600 kg Lift height: 462 cm Clearance lift height: 157 cm Fork dimensions: 1.100 x 930 mm - Year: 2021 - Documentation available: Yes - └ Type Documentation: User manual - CE marking present: Yes - CE certificate present: No - Serial number: C11275Y02240 - Operating hours: 13226 Cedox Hh Rwspfx Alborg - Lifting capacity: 1600kg - Lifting height: 4620mm - Overhead clearance: 2120mm - Free lift: 1570mm - Fork length: 1100mm - Maximum fork width: 930mm - Minimum fork width: 200mm - Number of wheels: 4 Wheels - Attachment: Side-shift - Options: Non-marking tires, Work lights, Half cabin, Free-lift - Mast: Triplex - Drive: Electric - Battery information: - └ Brand/Type: 05EPZS0625 - └ Battery year of construction: 2021 - └ Capacity: 625Ah - └ Battery voltage: 48V - └ Battery test result: 65% - Transport dimensions: 1900mm x 1100mm x 2120mm (l x w x h) - Transport weight [kg]: 3318kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Koen van Lent

Condition: used, Year of construction: 2007, operating hours: 15,936 h, Type of fuel: Electric Colour: Grey Empty weight: 6.777 kg Dimensions (LxBxH): 290 x 125 x 318 cm Lifting capacity: 4.000 kg Lift height: 491 cm Fork dimensions: 1.200 x 1.150 mm - Year: 2007 - Documentation available: Yes Csdpsymdx Nsfx Albsrg - CE marking present: Yes - CE certificate present: No - Serial number: 516327000881 - Operating hours: 15936 - Lifting capacity: 4000kg - Lifting height: 4910mm - Overhead clearance: 3180mm - Free lift: 0mm - Fork length: 1200mm - Maximum fork width: 1150mm - Minimum fork width: 440mm - Number of wheels: 4 Wheels - Attachment: Fork positioner, Side-shift - Options: Full cabin, Radio, Joystick, Heating, Work lights - Mast: Duplex - Drive: Electric - Battery information: - └ Capacity: 930Ah - └ Battery voltage: 80V - Transport dimensions: 2900mm x 1250mm x 3180mm (l x w x h) - Transport weight [kg]: 6777kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Koen van Lent

Condition: used, Year of construction: 2017, operating hours: 11,962 h, lifting height: 5,450 mm, free lift: 1,870 mm, fuel type: electric, mast type: triplex, fork length: 1,160 mm, fork width: 1,240 mm, total height: 2,720 mm, total length: 2,300 mm, total width: 2,600 mm, color: yellow, Empty weight: 6.900 kg Lifting capacity: 3.500 kg - Year: 2017 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 17496 - Operating hours: 11962 - Lifting capacity: 3500kg - Lifting height: 5450mm - Overhead clearance: 2720mm - Free lift: 1870mm - Fork length: 1160mm - Maximum fork width: 1240mm - Minimum fork width: 440mm - Attachment: Fork positioner - Options: Free-lift - Mast: Triplex - Inspection valid until: 12.2025 - Drive: Electric - Driving direction: 4 Road - Battery information: - └ Brand/Type: 40/5PzBH775 - └ Battery year of construction: 2016 - └ Capacity: 775Ah Cjdpfx Alsxzznpjbsrg - └ Battery voltage: 80V - Transport dimensions: 2300mm x 2600mm x 2720mm (l x w x h) - Transport weight [kg]: 6900kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Koen van Lent

Condition: good (used), Blacksmithing equipment / power-driven blacksmith's forge from a vocational training center. Crodpfx Alszbiqtobog Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: excellent (used), Grinding drum (rubber air drum) Original product of the company KED, (Kurt Ehemann) -Type: G 15 x 20 -consisting of: -Base body, rubber hose, air valve, 2 clamping caps for rubber hose -Dimensions: -Diameter: 150 mm -Grinding length: 150 mm -Length of base body: 200/210 mm -Holding bore: 30 mm -Quantity: 2 available -Price: per piece Available in other sizes upon request: e.g. diameters 40 mm, 60 mm, 75 mm, 100 mm, 125 mm, 150 mm, 175 mm, 200 mm, 250 mm, 300 mm e.g. grinding length 100mm, 150mm, 200mm, 250mm, 300mm, 400mm, 500mm Also available as brush grinding elements. Csdpfjb A S Raex Alberg Furthermore, we also carry general Ehemann-related spare parts. Price of grinding drums is shown in the attached PDF file.

Condition: good (used), Tapping chuck, thread chuck, tapping chuck, thread cutting attachment -Manufacturer: WMW, thread cutting device type GSA 1 -Recording: MK1 / B12 -Reversing gear: Quick return integrated -Clamping diameter: max 6 mm -Thread cutting sizes: M2-M4 -Number: 2x thread cutting chucks available -Price: per piece -Dimensions: 125/100/60 mm -Weight: 0.7 kg Credetxkunjpfx Albog