Used Polygonmach Tertiary Impactor Hsi - Ptc-1 for sale (78,506)

Condition: excellent (used), Year of construction: 2006, For sale are functional and very well-maintained dual-fuel burners from the Weishaupt brand, model GL3-630 kW, complete with a gas line DUNGS DN 40. Weishaupt: GL3 - (630 kW) Prsdpfx Ajzaby Rshcsa Burner type: GL3/1-E Design: Dual-fuel Output: 90 - 630 kW 16 - 53 kg/h Year of manufacture: 2006

Condition: as good as new (ex-display), Year of construction: 2026, High-pressure cleaning unit, high-pressure flushing unit, high-pressure built-in unit on hot-dip galvanized and painted high-quality steel frame with forklift tines, suitable for installation in service vehicles. PTC Salmon, similar but not Feierabend & Fock, Karo, Leistikow, Müller, Rioned, Rockstroh, Rom, Rowo,... The following models are available: Salmon 60/150 | 60 l/min at 150 bar | Engine: Kohler 19 kW Salmon 45/200 | 45 l/min at 200 bar | Engine: Kohler 19 kW Salmon 35/250 | 35 l/min at 250 bar | Engine: Kohler 19 kW Salmon 30/300 | 30 l/min at 300 bar | Engine: Kohler 19 kW DIMENSIONS / WEIGHT: Dimensions without water tank LxWxH: approx. 760x1,250x1,200 mm Dimensions with 400l water tank LxWxH: approx. 1,220x1,250x1,200 mm Dimensions with 800l water tank LxWxH: approx. 1,670x1,250x1,200 mm Empty weight without water tank: approx. 370 kg Empty weight with 400l water tank: approx. 400 kg Empty weight with 800l water tank: approx. 430 kg HIGH-PRESSURE PUMP: - Manufacturer: HPP - Model: CLW - Flow rate: 30 - 60 l/min - Operating pressure: 150 - 300 bar ENGINE: - Manufacturer: Kohler - Model: KDW 1003 - Fuel: Diesel - Max. power: 26 hp (19 kW) CONTROL PANEL: - Start button - Operating hour counter - Electronic fuel gauge - LED indicators for oil temperature, low oil pressure, clogged air filter, tachometer, generator and spark plugs - Emergency stop button ELECTRICAL CONTROL: - Wind/unwind hydraulic hose reel; - Bypass on/off; - Speed control +/-; - Emergency stop button; - Switch to wireless remote control; INSTALLED ALARM: - Low water protection against dry running of the high-pressure pump with automatic shut-off function. SAFETY AND PRESSURE REGULATING VALVES: - The unit is equipped with a safety valve, a pressure regulating valve and a pressure gauge. HIGH-PRESSURE HOSE REEL: - Type: Electric hose reel - Material: Stainless steel - Capacity: max. 80 m ½“ and 80 m 3/8" high-pressure hose - Hose: 80 m ½“ high-pressure hose (included) - Hose guide: manual LOW-PRESSURE WATER SUPPLY HOSE REEL: - Type: manual hose reel - Material: Stainless steel - Capacity: max. 35 m ¾“ low-pressure hose - Hose: 35 m ¾“ low-pressure hose (included) WATER FILTER: - With washable cartridge and drain valve. - Filtration rate: 50 Mesh Podpjiky H Ssfx Ahcsra INCLUDED IN DELIVERY: - Multifunctional wireless remote control IMET; - Engine on/off; - Bypass on/off; - Speed control +/-; - Wind/unwind hydraulic hose reel; - Emergency stop button; - Battery charger for wireless remote control; - 400 or 800 l water tank (with steel frame) made of polyethylene; OPTIONAL ON REQUEST: - Pulsation/booster pump; - 50 or 60 m ½“ high-pressure hose; - 50, 60 or 80 m 3/8“ high-pressure hose with G3/4“ connection; ACCESSORIES ON REQUEST: - STORZ kit for connection to the water hydrant; - UNI 45 kit; - Version with 2 HD reels; - Mobile hot water generator 10 kW – 12 VDC; - High-pressure spray gun kit, swivel joint and quick coupling; - High-pressure lance kit with flat spray nozzle 15° / rotating nozzle; - Lance kit for high flow; - Rotating nozzle kit; - Double nozzle kit; - Water sandblasting lance kit; - Detergent dispenser kit; - Stair cleaning unit; - Surface cleaner; - Sludge suction device (Venturi); - Pipe cleaning nozzles; Further accessories on request.

Condition: new, For sale: professional electronic circulation pump Wilo Stratos 50/1-9 – high-efficiency, energy-saving, designed for heating and cooling systems. Technical specifications Manufacturer: Wilo Model: Stratos 50/1-9 Pedpfx Aheyhhn Decera Power supply: 1~ 230 V, 50/60 Hz Power: 25–490 W Current: 0.20–2.15 A Connection: DN50 (2”) Connection: flanged Operating pressure: PN6 / PN10 Protection class: IPX4D Max. medium temperature: up to 110°C Energy Efficiency Index: EEI ≤ 0.20 (ErP) Year of manufacture: 2015 Made in: Germany Condition Technically fully functional Very good visual condition Condition as shown in the photos Applications Heating systems Cooling systems Industrial and commercial buildings 📦 Possible shipping or personal collection 🧾 Invoice available 🌍 Export sales also possible

Condition: excellent (used), Year of construction: 2002, Weishaupt gas burner G7/1-D, with gas line Dungs DN 50 Design: ZMD-LN Output: 250-1550 kW Connection pressure: 15-500 mbar Year of manufacture: 2002 Pedpfx Aey Uvt Nehcjra

Condition: as good as new (ex-display), Year of construction: 2026, PTC JTR-C Cold Water Trailer – similar to, but not a Dynajet, Oertzen, Falch, ROM, Rioned, Karo, etc. - Single-axle trailer with a hot-dip galvanized frame, support leg with wheel, parking brake, automatic reverse gear, stand feet, taillights and reflectors, tow hitch for 50 mm coupling, 13" tires and ABS. The following cold water models are available: JTR-C 60/200 | 60 l/min at 200 bar | Engine: Kohler KDW 1404 26 kW JTR-C 75/150 | 75 l/min at 150 bar | Engine: Kohler KDW 1404 26 kW JTR-C 75/210 | 75 l/min at 210 bar | Engine: Kohler KDW 2204 37.5 kW JTR-C 84/190 | 84 l/min at 190 bar | Engine: Kohler KDW 2204 37.5 kW JTR-C 102/150 | 102 l/min at 150 bar | Engine: Kohler KDW 2204 37.5 kW Prjdpfx Ajfdkbgshcoa Engine type: TIER III (Kohler) or Stage V (Yanmar) - Dimensions: 3,370 x 1,640 x 1,540 - Unladen weight: approx. 600 kg - High-pressure pump: HPP - HD hose reel: fixed and manual or hydraulic with a maximum of 100 m of 1/2" and 60 m of 3/4" hose (included) - Water supply hose reel: manual with 50 m of 3/4" hose - Water tank: 600 l - Options such as remote control, warning light, work light and accessories available upon request.

Year of construction: 2022, condition: as good as new (ex-display), High-pressure cleaner PTC Easypower XL D, similar to but not a Dynajet, Oertzen, Falch, Hammelmann, Woma, Uraca, Kamat, or Denjet. - Operating pressure: 400-1500 bar - Flow rate: 13-47 l/min - Engine: Yanmar Stage V 4-cylinder 4TNV88 diesel engine, 53 hp/39.5 kW, 2800 rpm - Dimensions: 1,600 x 1,320 x 1,200 mm - Dry weight: approx. 740/760 kg - High-pressure pump: HPP three-plunger pump with ceramic plungers - High-quality frame made of painted steel with corrosion protection - Covers made of stainless steel - Holder for gun with lance - Available as a skid with anti-vibration feet or as a trolley with industrial wheels - Includes 20 m high-pressure hose with stainless steel quick couplings, spray gun, lance, and flat jet nozzle The following models are available: Easy Power XL D 47/400 | 47 l/min, 400 bar Easy Power XL D 38/500 | 38 l/min, 500 bar Easy Power XL D 30/600 | 30 l/min, 600 bar Easy Power XL D 19/1000 | 19 l/min, 1000 bar Easy Power XL D 17/1100 | 17 l/min, 1100 bar Easy Power XL D 15/1250 | 15 l/min, 1250 bar Easy Power XL D 13/1500 | 13 l/min, 1500 bar Prodpfx Ahedg Ittscja

Condition: as good as new (ex-display), Year of construction: 2026, High-pressure cleaner PTC Easypower XL E, similar but not a Dynajet, Oertzen, Falch, Hammelmann, Woma, Uraca, Kamat, Denjet - Operating pressure: 400-1500 bar - Flow rate: 13-38 l/min - Motor: IE3 electric 63A, 3Ph-400V-50Hz 50HP/37kW, 1450 rpm or IE3 electric 63A, 3Ph-440V-60Hz 50HP/37kW, 1750 rpm - Dimensions: 1,450 x 900 x 1,050 mm - Dry weight: approx. 450 and 550 kg - High-pressure pump: HPP three-piston pump with ceramic pistons - High-quality frame made of painted steel with corrosion protection - Covers made of stainless steel - Holder for gun with lance - Trolley with industrial wheels - Ergonomic handles for easier maneuverability - Industrial low-voltage power supply (24V) and control unit with star-delta starter and 10 m power cable - Safety switch with thermomagnetic relay for motor protection - Main switch, start/stop buttons, emergency stop - Operating hour counter - Incl. 20 m high-pressure hose with stainless steel quick couplings, spray gun, lance and flat spray nozzle 15° The following models are available: Easy Power XL E 38/400 | 38 l/min, 400 bar | 30 kW | 560 kg Easy Power XL E 30/500 | 30 l/min, 500 bar | 30 kW | 560 kg Easy Power XL E 20/800 | 20 l/min, 800 bar | 30 kW | 580 kg Prsdpfx Ahjfdzxijcsa Easy Power XL E 15/1000 | 15 l/min, 1000 bar | 30 kW | 580 kg Easy Power XXL E 19/1000 | 19 l/min, 1000 bar | 37 kW | 580 kg Easy Power XXL E 15/1250 | 15 l/min, 1250 bar | 37 kW | 580 kg Easy Power XXL E 13/1500 | 13 l/min, 1500 bar | 37 kW | 580 kg

Year of construction: 2022, operating hours: 1 h, condition: as good as new (ex-display), High-pressure cleaner PTC Easypower L E, similar to, but not a Dynajet, Oertzen, Falch, Woma, Kamat, or Denjet. - Operating pressure: 400 or 500 bar - Flow rate: 38 or 30 l/min - Motor: Electric 63A, 3-phase, 400V, 50Hz, 40 hp/30 kW, 1450 rpm or Electric 63A, 3-phase, 440V, 60Hz, 40 hp/30 kW, 1750 rpm - Dimensions: 1,370 x 850 x 1,030 mm - Dry weight: approx. 280 kg - High-pressure pump: HPP three-plunger pump with ceramic plungers - High-quality frame made of painted steel with corrosion protection - Covers made of stainless steel - Holder for gun with lance - Trolley with industrial wheels - Ergonomic handles for easier maneuverability - Industrial low-voltage power supply (24V) and control unit with star-delta starter and 10 m power cable Psdpfjfdzz Ujx Ahcera - Safety switch with thermomagnetic relay for motor protection - 4 industrial wheels - Direct water intake via self-priming pump - Stainless steel relief valve with pressure relief system and EASY START system - 100 mesh water filter with easily replaceable cartridge - Includes 20 m high-pressure hose with stainless steel quick couplings, spray gun, lance, and flat spray nozzle 15° The following models are available: Easy Power L E 38/500 | 38 l/min, 400 bar Easy Power L E 30/500 | 30 l/min, 500 bar

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 1 h, - High-pressure cleaner PTC TORPEDO MINI-E 3.8 M 230/50 Powersteam and TORPEDO MINI-E 5.8 T 400/50 Powersteam – similar, but not a Dynajet, Oertzen, Falch, etc. - Cold water / hot water / steam 32 bar up to 140°C / high-pressure steam 150 or 200 bar up to 150°C for cleaning and disinfecting. The following models are available: - TORPEDO MINI-E 3.8 M 230 Volt/50 Hz Powersteam, 8 l/min at 150 bar - TORPEDO MINI-E 5.8 T 400 Volt/50 Hz Powersteam, 8 l/min at 200 bar - Dimensions and empty weight: 110x64x98 cm, approx. 150 kg - Includes 10 m high-pressure hose, spray gun, lance, and flat spray nozzle 25°. Prodpofh Skaofx Ahcja

Year of construction: 2016, condition: ready for operation (used), Control Unit Brand HAAS Model Sigma 5 Main Drive Podpfjx H Uz Njx Ahcsra Number of axis 2 This HAAS TR160 with Sigma 5 was manufactured in 2016. It features a 2-axis table and is equipped with a Sigma 5 servo motor, ensuring precise and efficient operation. Ideal for those looking to enhance their machining capabilities. Contact us for more information. Application Types Other Machine Tools

Condition: used, mileage: 1 km, power: 283 kW (384.77 HP), axle configuration: 4x4, gearing type: automatic, Year of construction: 1996, GVW: 8.600 kg Please contact Emal Jaweed for more information Podpoyzfqwefx Ahcsra

Condition: used, Field of application: Mining Experience unparalleled efficiency with Polygonmach's Mobile Dewatering Screen and Hydrocyclone, part of our revolutionary range of mobile crushing and screening plants on wheels. Polygonmach, an industry-leading brand, is committed to redefining the standards of construction and mining industries with its cutting-edge technologies. The Polygonmach Mobile Dewatering Screen and Hydrocyclone is an exceptional solution that offers high-efficiency classification and separation of materials, a must-have for operations dealing with a variety of mineral ores, aggregates, and recyclables. This mobile system is crafted to effectively dewater and separate fines, providing a consistent, saleable product. The dewatering screen works by removing the water from your washed sand and other materials, while the hydrocyclone ensures precise and efficient classification and separation. Our hydrocyclone technology ensures precise and rapid grading. Its centrifugal motion enables it to separate heavier particles, improving product purity. This is paired with our dewatering screen that offers high-frequency vibration, ensuring effective dewatering for a dry, high-quality end product. Pedpfjx Dh S Tjx Ahcjra As part of our ethos to deliver user-friendly solutions, the Mobile Dewatering Screen and Hydrocyclone system is designed for easy operation and maintenance. It comes with hydraulic legs for convenient positioning and a robust design capable of withstanding challenging working conditions. What sets the Polygonmach mobile system apart is its ability to deliver high throughput and efficiency while ensuring the quality of the final product. Applications: construction Type: centrifugal, mobile Material: for bulk materials Other characteristics: high-frequency, dewatering, high throughput net weight: Min.: 6,100 kg(13,448 lb)Max.: 10,200 kg(22,487 lb) engine power: Min.: 3.6 kW(4.89 hp)Max.: 9 kW(12.24 hp)

Condition: used, Applicable material: Concrete Cargo space capacity: 60.000 l Polygonmach single shaft mixers has been designed for ready mix concrete nad other type of concrete types prodcution from c10 to c40. Its robust helical design enables its low problematic, low maintenance necessity, low abbrasion rate, longlife span. Paddles, pallets and helical arms made from ni-hard 25mm width, body and side wearing plates made from 10mm hardox 400 plates. Discharge covers are controlled by pneumatic or hydraulic which can be managed by Scada-PLC software. From 0,5 to 2 m3 capacity is available. Polygonmach single shaft mixers offers its customers with automatic lubrication systems, easy lubrication bar to multiple points, top cover for several applications. Prjdpfxjx Dzb Ij Ahcja Polygonmach in contrast to competitors gives you %100 flexible design and customer based projectsü, multiple hopper and mixer design is available. Motor type: hydraulic Mobility: truck-mounted Other characteristics: automatic, single-shaft Capacity: Max.: 2 m³(70.6 ft³)Min.: 0.5 m³(17.7 ft³) concrete plant

Year of construction: 2020, condition: used, New: Yes Colour: Orange Field of application: Mining Volume of the tank: 150 m^3 Productivity: 250 tph Prodpfx Asx D A Upjhcoa Rated sizes : 2000 x 6000 mm Motor power : 22 kw 1500 d/dk Drive system : with conventional drive, with 2 weights Amount of Ball Bearing : 2 ea Number of Ball Bearing :2*22318 (FAG T41 Ball Bearing with Vibration Amplitude) Screening area : Single stage Number of Vibration amplitude : 6-8 amplitude, Linear Free Eliptic Number of Springs : 12 ea Front chute : with 6 mm rotary chute Bottom chute : flat discharge chute Type of power transmission : belt pulley couples Body Construction : Heavy duty type (12mm ST37 Ereğli Iron Steel Sheet Metal)

Condition: used, Applicable material: Concrete Make of engine: Audi Capacity: 60 m^3/h The POLYGONMACH PSC60 60 m3 stationary concrete batching plant is capable of producing 60 cubic meters of concrete per hour. These types of stationary concrete batching plants are designed to produce high-quality concrete, primarily used in large-scale construction projects. Stationary concrete batching plants comprise a complex system that includes components like concrete mixers, cement silos, water scales, aggregate weighing systems, and control panels. They come in various capacities and are chosen based on the project's needs. The POLYGONMACH 60 m3/h stationary concrete batching plant has many advantages, some of which are: High Capacity: The 60 m3/h stationary concrete batching plant, capable of producing 60 cubic meters of concrete per hour, is ideal for use in large projects. Quality Concrete Production: Stationary concrete batching plants are designed to produce high-quality concrete. Hence, the 60 m3/h stationary concrete batching plant also produces high-quality concrete. Labour-saving: Stationary concrete batching plants reduce the number of workers, thus cutting down labour costs. Also, the stationary nature of the plant eliminates time and costs of relocation. Time-saving: Stationary concrete batching plants speed up the process of concrete production and distribution, thereby shortening project completion time. Less Waste: Stationary concrete batching plants produce the exact amount of concrete needed, thus reducing waste and being environmentally friendly. Lower operating costs: Stationary concrete batching plants cut down operating costs and are more economical compared to other production methods. Mobility: stationary Capacity: 60 m³/h(2,118.88 ft³/h) Podpfjx D Dhdsx Ahcera

Condition: new, Empty weight: 18.600 kg Dimensions (LxBxH): 365 x 365 x 2500 cm Cargo space capacity: 220.000 l Wall thickness: 6 mm Thickness of end walls: 5 mm Thickness of partition walls: 4 Number of fillers: 2 Podpfxsx D A Suo Ahcora 1. SILO CAPACITY: 2000 TONNES 2. SILO HEIGHT: 258110 mm(With 3 Meters Concrete Frame) 3. SİLO DIAMETER: Ø 12 300 mm 4. QUANTITY OF SILO LEGS: 4 5. SILO OUTPUT DIAMETER: Ø 500 mm 7. SILO WEIGHT: 110 600 kg 8. MATERIAL OF SILO LEGS: Ø500 x 18 mm STEEL PIPE 9. SUPPORT OF SILO LEGS: NPL 80 mm 10. SHEET METALS OF SILO LEG: 20-25 mm 11. CONICAL PART SUPPORT MATERIAL: 100 mm STEEL C CHANNEL. 12. CONICAL PART MATERIAL: ST- 37, 6 mm SHEET METAL(S265) 13. SILO BODY MATERIAL: ST -37, 5-4 mm SHEET METAL 14. TOP COVER MATERIAL OF SILO: ST -37, 4 mm SHEET METAL. 15. INNER MAN HOLE IS NCLUDED.(Optional) 16. OUTER MAN HOLE IS INCLUDED. 17. SILO ROOF INCLUDES PAREPETS. 18. MAINTENANCE PLATFORM IS INCLUDED. 19. CHARGING PIPE: 4’’ PIPE UP TO SILO LEG. 20. PLATFORMS AND SERVICE LADDER FOR PLATFORM GALVANISED PNEUMATIC AND ELECTRICAL CONNECTION PERFORMED Painting : 1 layer of anticorrosive paint, 2 layers of FINAL COAT EPOXY PAINT , total paint thickness : 125- 140 microns

Condition: new, Year of construction: 2023, total length: 40 mm, total width: 1,000 mm, Empty weight: 37.000 kg Productivity: 1000 tph 1000x44400mm radial telescobic conveyor General Tech Spec of 150 Feet Radial Belt Conveyor Drive System Direct Accoupled Drive Drum 323* 12 mm rubber coated Reducer Yılmaz KR Series-VOLT 50hz-380V Bed Type SNH Series Felt Cast Iron Bed with Over Lubrication Platform Single Sided Walkway on main belt Band Tape TS 542 Norm 4 Layers, 4/2,10mm Width Direction Roll 12 units Nominal Capacity 800-1000 tph Drive 2.5” Standard Kingpin Paint Acrylic Raised stockpile height 15 meters Lowered stockpile height 4,3 meters Belt widths: 1200mm(26 meters)-1000mm(22 meters) Stinger width 1000* 19000mm Radial Drive Eletrical Motor/Gearbox connected to wheels by chain Radial Move 5 degrees Belt Rear Mounted on static pivot Stockpile capacity at 270 degrees15m height 140900 metric tons Drum 323mm dia, anti material sticking Main Belt 2x22 kw Motor Gearbox Stinger Belt Conveyor 2x22 kw Motor Gearbox Radial Tires 8 pcs- 315*65*22,5 Chained to Motors Radial Drives 2 pcs 3 kw Motor Gearbox Total Power 95 kw Transport Weight 35 tons Transport Dimensions 4400x29300x3500mm Control Full Automatic remote controlled Automation component Siemens Radial Tyres Hydraulic Swing for erection Erection Hydraulic Jacks for elevation Scraper Available at main belt and receiving hopper Cleaning Both belts have cleaning scraper under drive drum Receiving Chute included Discharge Chute to stinger belt Included Impact rolls Included at receiving chute section Control panel LCD screen and piano panel for back-up With Polypole automatic piling software and Siemens PLS option Prodpfx Ahox D A S Uscsa Fast delivery, high,quality, economical

Condition: used, Applicable material: Concrete Capacity: 30 m^3/h Site type concrete batching plants has been issued for easy installation and easy legal procedures. Site batching plants consist of aggregate hoppers, from 2 to 8 pcs differant aggregate can be used such application, belt onveyor or skip hoist to transfer material from hoppers to mixer, mixing section, pan,planetery,twin shaft, single shaft or cone mixer, weighing section. Site type concrete batcing plant is for very fast location changer customers. After once installation you will never ned to disassembly iy again due to 4.5 full operation height. With 0,75m3 planetery mixer; Polygonmach site plants are best for small scale operations and all type of concrete you need. Site type plant a kind of mobile type plant however it has got shipment price advantages, all site type plant set consist of concrete transfer belt conveyor, cement silo can go with single container around the world. With axles, towing hook make it easy to trasnport in hours. Portable batching plants,concrete plants, mixers are used to prepare precious dosed material by pneumatic cylinders and clamshell outlets, afterwards the material is weighed by weighing bin under hoppers. The material has been consisted of sand and aggregate(0-4mm, 4-8mm, 8-16mm, 16-32mm or similar). For excise material transfer procedure, belt conveyor. The sand and aggregate is waited before discharge to mixer. Additonally, there is weighing bin at top of mixer which consist of cement weighing scale/hopper, water hopper, liqued addtive hoppers. After sand and gravel discharged into mixer, cement, water,additive, sand and gravel is mixed on recipe based the mixing time chnages as per recipes. Pjdpsx Dx Dyofx Ahcera Mobility: mobile Capacity: 45 m³/

Condition: used, New: Yes Applicable material: Bitumen Empty weight: 16.000 kg Capacity: 10 m^2/h Full Automatic Bitumen Emulsion System 1. COLLOID MILL (10 m3/hour) 1 2. FOAM TANK (5 m3) 1 3. BITUMEN FEEDING PUMP 1 4. FOAM LYE SYSTEM 1 Podpox D A Rkefx Ahcora 5. PIPE NETWORK AND EQUIPMENTS 1 6. CONTROL PANEL SYSTEM 1 7. CHASSIS 1 FOAM TANK(1 pieces) a) Frame - Box profile - Capacity : 5 m3 - Tank body will be produced of 3 mm AISI 304 stainless steel plate - The welded connections will be manufactured with appropriate stainless stell TIG welding b) Heating - 2’’ stainless steel pipe - Oil input and output pipes will be 1’’ DN50,PN16,DIN 2633 - Tightness test will be done 6 bar pressure. c) Mixing System - 3 kW 60 d/min rpm mixing motor - Drive will be provided with sprockets - Imperviousness will be obtained at beddings. - Bearings will be SKF or FAG. - The Fixed wings at exteriror walls will be mounted so that dispersion will be increased and a homogeneous structure will be provided. d) Heat displays will be digital and analogue and two outlets will exits. - Bitumen pump capacity will be as max. 8 m3/h bitumen pumping - Will be 7,5 kW 400 r/min reducer motor coupled. - Bitumen counter will be 10 m3/h capacity system. a) Pipes - Will be steel drawn pipes DIN 171175 (DN200,DN150,DN100,DN80,DN65,DN25) - Mill line will be manufactured as 1.5’’ inner pipe, 2’’ out jacket pipe. - Jacket pipes will be welded connection under TSE standarts. - Jumper pipes will be established from appropriate points of 0,5’’. b) Compensatories - DN 50,DN 80, PN 16 200°C c) 3 ways and 2 ways valves with heating - Complied to TSE standarts. - Will provide the conditions of working under high pressure (16 bar) and heat (230 °C) d) Hot Oil Valves - KLINGER or THERMO branded hot oil valve. Heat resistant. - Will be DN 25 PN16, DN65 PN16, DN50 PN16 e) Filter - Will be with 3 mm wire interior reservoir and it will be cleanable often and easy. - The panel will be in type of compiled to IC standarts.

Condition: used, Applicable material: Concrete POLYGONMACH PSC240 240 m3/hour is the production capacity of a stationary concrete plant that can produce 240 cubic meters of concrete per hour. Fixed concrete batching plants are designed to produce high volume concrete used in the construction industry. Projects where this concrete is used are generally large construction projects and require high strength, long life, environmentally friendly and high quality concrete. Stationary concrete batching plants are equipped with automatic or semi-automatic control systems to increase production efficiency and quality and are available in various capacities. A concrete batching plant with a capacity of 240 m3/hour can be an ideal production capacity for medium and large scale construction projects. The type of sand aggregate to be used in the 240 M3 stationary concrete plant may vary according to the requirements and conditions of the project to be used in the production of concrete. The sand aggregate to be used should meet the properties required by the concrete, especially in terms of granulometry. Sand aggregates are generally used for concrete types between M20 - M150 and should have properties such as bonding, durability and stability. Pjdpfxsx D Dcuj Ahcera Generally, round, angular or flat sands can be used in a concrete plant. For example, round grits hold less water and are easier to work with, while angular grits absorb more water and increase bonding strength. Flat sands, on the other hand, can be used in accordance with the fine details of the concrete. The appropriate type to be selected for sand aggregate should be determined according to the characteristics of the project, concrete quality and durability. Mobility: stationary Other characteristics: automatic Capacity: 240 m³/h(8,475.52 ft³/h)

Condition: used, Applicable material: Concrete Cargo space capacity: 60.000 l Polygonmach single shaft mixers has been designed for ready mix concrete nad other type of concrete types prodcution from c10 to c40. Its robust helical design enables its low problematic, low maintenance necessity, low abbrasion rate, longlife span. Paddles, pallets and helical arms made from ni-hard 25mm width, body and side wearing plates made from 10mm hardox 400 plates. Discharge covers are controlled by pneumatic or hydraulic which can be managed by Scada-PLC software. Psdpox A R Emefx Ahcsra From 0,5 to 2 m3 capacity is available. Polygonmach single shaft mixers offers its customers with automatic lubrication systems, easy lubrication bar to multiple points, top cover for several applications. Polygonmach in contrast to competitors gives you %100 flexible design and customer based projectsü, multiple hopper and mixer design is available. Motor type: hydraulic Mobility: truck-mounted Other characteristics: automatic, single-shaft Capacity: Max.: 2 m³(70.6 ft³)Min.: 0.5 m³(17.7 ft³)

Condition: used, Colour: Red Field of application: Mining Take your material processing capabilities to the next level with Polygonmach’s Fine Material Washer. Known for their engineering excellence and innovative solutions, Polygonmach has yet again pushed the boundaries with their advanced Spiral Classificator and Screw Washer. Designed for maximum efficiency and performance, this system offers an unmatched processing solution for a variety of materials. The Polygonmach Fine Material Washer, also known as Spiral Classificator or Screw Washer, is a powerful tool for sand classification and dewatering duties. It is specially designed for washing, classifying, and dewatering fine material as well as for scrubbing and expelling clays and silts from raw materials. The design offers a high level of cleaning, improving the quality of your end product. While it is mainly used for cleaning and handling of sand and gravel, it also works with many other minerals. When you need the highest level of cleaning, this washer is your go-to solution. The Polygonmach Fine Material Washer's superior design ensures optimal performance. It features replaceable, wear-resistant paddles that enhance the machine’s longevity. The system also comes with an adjustable weir and water volume to meet your specific washing needs. To achieve the desired results, the Polygonmach Fine Material Washer is equipped with a heavy-duty design and construction. It is highly efficient, delivering precision, and accuracy in its operations. Despite its robust construction, it is easy to maintain and has low operational costs. Prsdpfx Ahsx D A Dwecoa

Condition: used, New: Yes Applicable material: Bitumen Empty weight: 18.000 kg Productivity: 10 tph Polymer Modification Plant Full Automatic TECHNICAL SPECIFICATIONS Grinding and homogenizing Polymer (SBS,APP,KRATON etc.) and bitumen. Feeding : Bitumen and polymer pre-mixture Flow rate : max. 15 t/hour Density : 1.1 g/cm3 Viscosity : max.20000 mPa s (cP) Heat: 190 °C Solid Matter : Machine Entrance :max. 3-6 mm Machine Exit :max. 0.2 mm MOTOR 130 kW Speed 3000 min-1 Voltage 400 V,50 Hz,3 phase Starting methode Y/Δ Prjdox D Df Nopfx Ahcsa 2. VERTICAL MIXING TANK a) Frame - Will be manufactured as vertical rectangular profile. - Will be manufactured in dimentions as providing 11 m3 volumes. - Body will be produce 5 mm St37 quality plate. - Bitumen filling pipe will be 3’’ DN80 ,PN16,DIN2633 1 unit, discharge pipe will be 3’’ DN150,PN16,DIN2633 and 3’’ DN80,PN16,DIN 2633 2 units. - Control cover will be dimensions of 500x500 mm. b) Heating - It will be as providing from from out walls with diathermic hot oil heating. - Imperviousness test will not be performed under 6 bar. c) Insulation - 100 mm rapid wire-mesh rock wool will be comply with TSE ( Turkish Standards Institute ) standarts. - The exterior surface will be stainless steel plate and will be manufactured as to container dimentions. d) Mixing System - 2x 7,5 kW 60 d/min rpm mixing motor - Drive will be provided with sprockets - Imperviousness will be obtained at beddings. - Bearings will be SKF or FAG. - The Fixed wings at exteriror walls will be mounted so that dispersion will be increased and a homogeneous structure will be provided. e) Heat displays will be digital and analogue and two outlets will exits. f) Built-in connection paddle, ladders and platform will be presented. 3. BITUMEN PUMPS - Will be 2 ½ XLA type with oil heating. - Pump capacity will be as 25 t/h bitumen pumping - Will be 7,5 kW 400 r/min reducer motor coupled. 4. SBS (POLYMER MODIFIED GRANULE) FEEDING UNIT a) Feed Hopper - Will have 500 x 500 gap width - Will be produced of 4mm plate - In feding helix, it will be mounted with bolt30 m3/h capacity granulate feeding. - Frame will be in 5 mm Wall thickness from 220 mm diameter pipe. - Imperviousness will be provided in beddings. - In bearings SKF or FAG will be used. - Will 5,5 kW 80 rpm gear unit with coupling drive. 5. PIPE NETWORK AND EQUIPMENTS a) Pipes - Will be steel drawn pipes DIN 171175 (DN200,DN150,DN100,DN80,DN65,DN25) - Mill line will be manufactured as 3’’ inner pipe, 4’’ out jacket pipe. - Jacket pipes will be welded connection under TSE standarts. - Jumper pipes will be established from appropriate points of 1’’. b) Compensatories - DN 50,DN 80, PN 16 400°C c) 3 ways and 2 ways valves with heating - Complied to TSE standarts. - Pneumatic control type will be used. - Will provide the conditions of working under high pressure (16 bar) and heat (230 °C) d) Hot Oil Valves - KLINGER or THERMO branded hot oil valve with pistons will be used. - Will be DN 25 PN16, DN65 PN16, DN50 PN16 e) Filter - Will be with 3 mm wire interior reservoir and it will be cleanable often and easy. - Will be with 3’’ flange entrance and exit...

Condition: used, Applicable material: Concrete Prodpfxjymkate Ahcoa A POLYGONMACH PCC60 60 M3 compact concrete batching plant, if high quality and well designed, can provide users with many advantages: 1. Thanks to its high production capacity, it provides a fast supply of concrete used in large and complex construction projects. 2. Depending on its technical characteristics, especially mold, pump, etc. When used, it simplifies the concrete pouring works and speeds up the works without sacrificing quality. 3. Thanks to the automatic control systems, the concrete quality is ensured at a consistently high level. This ensures excellent results in construction projects. 4. Thanks to its compact design, it takes up little space and is easy to transport, install and disassemble. Thus, users can quickly move these exchanges from one place to another. 5. With energy efficient and environmentally friendly design options, operating costs are lowered, thereby saving more money for users. 6. If properly cared for, it is long lasting and generally delivers a high quality product. Because of all this, a high-quality and well-designed compact concrete batching plant with a capacity of 60 M3 is preferred by construction companies and contractors. A POLYGONMACH 60 M3 compact concrete batching plant can use different types of additives, cements and aggregates depending on its type and properties. These factors determine the desired properties of concrete. Cement: The cements generally used in concrete batching plants are ordinary ported cements, blast furnace slag cements and reactive powder additive cements. These different types of cement can change various properties of concrete. Mobility: stationary Other characteristics: compact, automatic Capacity: 60 m³/h(2,118.88 ft³/h)

Condition: used, Applicable material: Concrete Capacity: 30 m^3/h Site type concrete batching plants has been issued for easy installation and easy legal procedures. Site batching plants consist of aggregate hoppers, from 2 to 8 pcs differant aggregate can be used such application, belt onveyor or skip hoist to transfer material from hoppers to mixer, mixing section, pan,planetery,twin shaft, single shaft or cone mixer, weighing section. Site type concrete batcing plant is for very fast location changer customers. After once installation you will never ned to disassembly iy again due to 4.5 full operation height. With 0,5 and 0,75m3 single shaft and planetery mixer; Polygonmach site plants are best for small scale operations and all type of concrete you need. Predpfsylhdgsx Ahcja Site type plant a kind of mobile type plant however it has got shipment price advantages, all site type plant set consist of concrete transfer belt conveyor, cement silo can go with single container around the world. With axles, towing hook make it easy to trasnport in hours. Portable batching plants,concrete plants, mixers are used to prepare precious dosed material by pneumatic cylinders and clamshell outlets, afterwards the material is weighed by weighing bin under hoppers. The material has been consisted of sand and aggregate(0-4mm, 4-8mm, 8-16mm, 16-32mm or similar). For excise material transfer procedure, belt conveyor. The sand and aggregate is waited before discharge to mixer. Additonally, there is weighing bin at top of mixer which consist of cement weighing scale/hopper, water hopper, liqued addtive hoppers. After sand and gravel discharged into mixer, cement, water,additive, sand and gravel is mixed on recipe based the mixing time chnages as per recipes. Mobility: mobile Capacity: 30 m³/h(1,059.44 ft³/h)