Used Pilous Arg 260 Plus for sale (9,602)

Condition: ready for operation (used), Brinkmann TC 260 / 460 MV + 210 submersible pump, 250 L/min. No. 003, serial number as shown in the photo, used, minimal signs of wear, 100% functional, scope of delivery as shown in the photos. Lrodpoi D Hmwofx Aiisn

Condition: ready for operation (used), GMN TSE 75 cdu x 260/15000 high-speed spindle, serial number as shown in the photo, used, with normal signs of wear, 100% functional, scope of delivery as shown in the photos. Lodpfx Aoi Eaa Usiiorn

Condition: ready for operation (used), Allen Bradley 2711P-RP9D Panelview Plus Logic Module Ser A / 2711P-B12C4D9 SN: 44129067, used, normal signs of wear, 100% functional, scope of delivery as per photos. Ljdpfox Equcex Aiiorn

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 7,500 kg, maximum load weight: 18,700 kg, overall weight: 26,200 kg, axle configuration: 2 axles, total length: 12,400 mm, total width: 2,550 mm, tire size: 205 / 65 r 17,5, Additional Information Chassis, Saddle, Haulage Company Fine-grained steel welded construction, saddle plate with 2 replaceable kingpins, rear slope to approx. 1920 mm, continuous lashing rail for ramps at the rear and front on the gooseneck, sliding rollers at the rear, low-bed to the axle group after the slope. Drawing approval required from the customer in case of an order! Pair of lashing points recessed in the outer frame at the top and side, 10 tons each. Pair of lashing eyes recessed in the outer frame on the gooseneck, 5 tons each. 24-ton, 2-stage support winch, single-sided operation, with straight lower part, without stroke compensation. Foldable rear support, mounted externally. Wheel chocks with holder. Aluminum side impact protection. Steel underrun protection for EC, if technically possible. Quarter panel fenders. With anti-spray flaps according to EC. 1 pair of wheel recesses recessed in the low-bed area after the gooseneck, sloped for entry. Length at the bottom approx. 1840 mm, depth of wheel recesses approx. 200 mm. 2nd pair of wheel recesses on the rear slope. Depth approx. 200 mm. Note: Frame in the main beam area is 200 mm higher than the wheel recess. A detailed technical review is still required in case of an order. Wheel recess cover retractable from the low-bed with hardwood inserts, on the rear slope with hardwood inserts. Electric winch, 24 Volt, pulling force 5500 kg, mounted in the slope of the gooseneck, does not reach into the loading area, operation with wireless remote control, rope length 35 m x approx. 10 mm, with roller rope guide and detachable guide roller on the rear slope. Axles + Suspension SAF or BPW drum brake axles at our discretion. Air suspension with lift and lower valve + auto-reset function. Wheels and Tires 205 / 65 R 17.5 tires with 129/127K (132/132G) marking for 8 tons tire load capacity at max. 90 km/h. At the manufacturer's choice. Steel rims in twin arrangement, factory silver. Braking System 2-line pneumatic braking system. Spring-loaded parking brake. 2 non-interchangeable coupling heads at the front, without connecting line. EBS manufacturer Haldex, electronic braking system with EBS socket at the front, without connecting cable (brake calculation sent to the customer for approval. 07/15/2021). Attention: The trailer may only be pulled by towing vehicles which ensure the effectiveness of the ABS! Axle load detection via EBS-CAN bus signal, for display on the display in the driver's cab, truck must be prepared accordingly, no truck installed (no calibrated scale). Electrical System 24 Volt, multi-chamber lights, yellow LED lighting on the sides. 2 white position lights at the front. 2 white/red marker lights at the rear. 2 x 7-pole and 1 x 15-pole non-interchangeable sockets at the front, without connecting cable. Floor Gooseneck with steel / checkered plate covering. 30 mm sieve floor, in the low-bed between the longitudinal beams in the middle. In the wheel track area covered with toothed grating, in the wheel recesses with steel / checkered plate covering. Ramps Pair of aluminum ramps 3,200 mm long, load capacity per pair 12,000 kg. Ljdpfx Asi Ri Hreiisrn Pair of steel ramps for entry into the low-bed. Pair of steel ramps for driving onto the gooseneck. Side boards Approval / Signs Country of registration: Germany With DEKRA approval and certificate (according to §13 EC - FGV). Prepared for single-row license plate holder. Contour marking with reflective strips according to ECE R 048, yellow on the

Condition: repair required (used), Year of construction: 2009, functionality: limited functionality, turning diameter over cross slide: 830 mm, turning length: 1,250 mm, turning diameter: 580 mm, spindle bore: 103 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 8 rpm, Equipment: rotational speed infinitely variable, Complete CNC component set Siemens 802 D – bed and guide rails ground Description: CNC component set / machine construction kit with Siemens Sinumerik 802D control. The machine is in an advanced state of reconstruction. Sold as pictured as a DIY project for completion. All components are present. Key highlights: • Mechanics: The machine bed and support have already been freshly ground and painted in RAL 5015. • Geometry: The mechanical geometry has already been professionally restored (optimal basis for high precision). • Control: Includes a functional Siemens Sinumerik 802D CNC control. • Feed drive SIEMENS, main motor regulator from Siemens • Completeness: All related parts and assemblies are in stock and ready. Perfectly suited for the reconstruction of a precise CNC machine. Sold ex-works as inspected, without warranty. Technical data of the metal lathe MEXPOL TUB 830 C in the condition it was in before being disassembled: • Maximum turning diameter over bed: 830 mm • Maximum turning diameter over slide: 580 mm Lsdpfxey Sub Hj Aiisrn • Maximum bar diameter: 103 mm • Maximum turning length between centers: 1250 mm • Rapid traverse rate in X/Z axis: 10 m/min • Spindle speed range: 8–2000 rpm • Number of steps for adjusting the spindle speed: 3 • Diameter of the front spindle bearing: 140 mm • Power of the spindle drive: 15 kW • Maximum spindle torque: 2100 Nm • Bed width: 520 mm • Height of the centers above the bed guides: 420 mm • Diameter of the tailstock quill: 105 mm • Extension of the tailstock quill: 200 mm • Taper of the tailstock quill: Morse 6 • Drive of the X-axis: SIEMENS motor (torque X-axis: 11 Nm) • Drive of the Z-axis: SIEMENS motor (torque Z-axis: 18 Nm) • Coolant pump capacity: 25 l/min • Power of the coolant pump motor: 0.18 kW • Speed of the coolant pump motor (50 Hz): 2800 rpm • Installed power: 22 kW • Power supply: 3x 400 V; 50 Hz Equipment of the lathe TUB 830C: • CNC control: SIEMENS SINUMERIK 802D Sales and delivery conditions: • Loading: Loading onto your transport vehicle is included in the price. • Delivery: Ex-works Hilden. • Validity: The offer is subject to change – subject to prior sale (valid only while stocks last).

Condition: used, TECHNICAL DETAILS - Number of axes : 3 MILLING SPINDLE - Tool holder type : BBT 30 (Big-Plus) - Spindle power : 12 [kW] - Spindle speeds : 10000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 500/400/330 [mm] - Rapid traverses rates (X/Y/Z) : 54 [m/min] TOOL CHANGER - Auto. Tool Changer type : Parapluie - Tool magazine capacity : 21 TABLE - Table dimensions : 650 x 400 [mm] - Maximum weight upon table : 300 [kg] - Distance table / spindle nose (min./max.) : 250-580 [mm] POWER SUPPLY - Supply voltage : 380 [V] WEIGHT & DIMENSIONS - Machine floor space : 1565 X 2027 [mm] - Machine height : 2346 [mm] Ledpfxoxcbulj Aiiern - Machine weight : 2000 [kg] EQUIPMENT - CNC : Fanuc 31i model B5 - Rigid tapping - 3 colors status lamp - Coolant tank * with high-pressure pump : 15 [bars] - Coolant through spindle - Chips conveyor : Gauche - Tool probe : BLUM Z NANO

Condition: used, Year of construction: 2016, operating hours: 704 h, machine/vehicle number: 3886, overall weight: 4,900 kg, working height: 12,000 mm, enginetype: Electric, manufacturer: JLG Ljdpfx Aiezcbkhjijrn

Condition: used, Year of construction: 2010, operating hours: 4,524 h, machine/vehicle number: 1424, overall weight: 3,760 kg, enginetype: Diesel, manufacturer: Teupen Lrodpfx Aiszcbfxeijn

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, Four-clamp perfect binder, Muller Martini Amigo Plus Year: 2004 Maximum size: 400 x 270 mm Ljdpfx Aiozdvafoisrn Minimum size: 120 x 95 mm Speed: 300 – 1500 cycles per hour Equipment: Clamps: 4 Hot-melt spine gluing Hot-melt side gluing Delivery box

Condition: good (used), ONA Poli Spark die-sinking EDM machine Type: IN 260 S2000-60A Bed: 410 x 645 mm Documentation included Machine dimensions: 160x130x215 cm LxWxH Lrodpfx Aieq Eh Sksion Cabinet dimensions: 130x95x210 cm LxWxH Cabinet dimensions: 60x70x170 cm LxWxH

Condition: used, Year of construction: 2021, total length: 7,010 mm, Articulated telescopic work platform Manitou 160 ATJ Plus Drive Diesel Year built 2021 Lsdpfx Ajy Abhzjiijrn Work height (mm) 16,210

Condition: used, Year of construction: 2024, total length: 7,090 mm, - Arbeitshöhe 16.21 m Lrjdpfx Aijxd D T Teijn - Bodenfreiheit (Zugang) 0.38 m - Plattformhöhe 14.21 m - Maximale seitliche Reichweite 8.52 m - Ãœberhang / Knickpunkt Gelenk 7.59 m - Korbarm-Drehwinkel (oben / Boden) +66.50 ° / -65.80 ° - Tragfähigkeit des Arbeitskorbs 408 kg - Drehung des Oberwagens 350 ° - Drehung des Arbeitskorbs (rechts / links) 90 ° / 90 ° - Anzahl Personen (innen / außen) 3 / 3 - Innerer Wenderadius 1.28 m - äußerer Wenderadius 4.09 m - Fahrgeschwindigkeit - Transportmodus 5 km/h - Fahrgeschwindigkeit - Arbeitsmodus 1 km/h - Steigfähigkeit 45 % - Zulässige Neigung im Arbeitsmodus 5 ° - Bereifung Schaumgefüllt - Antriebsräder (vorne / hinten) 2 / 2 - Lenkräder (vorne / hinten) 2 / 2 - Gebremste Räder / Räder 0 / 2 - Hersteller / Motor Modell Kubota - D1105-E4B - Motornorm Stage V - Nennleistung Verbrennungsmotor / Leistung 24.80 Hp / 18.50 kW - Bodendruck 11.50 dan/cm2 - Hydraulikdruck 340 bar - Fassungsvermögen des Hydrauliktanks 53 l - Fassungsvermögen des Kraftstofftanks 51 l - Umgebungsgeräusch (LwA) < 105 dB - Schwingungsbelastung Hand/Arm < 0.50 m/s² - Täglicher Verbrauch 7 l - Umweltschädliches NOX 5.80 kg

Condition: good (used), axle configuration: 1 axle, first registration: 03/2023, loading space length: 5,300 mm, loading space width: 2,140 mm, loading space height: 2,400 mm, total length: 5,700 mm, total width: 2,250 mm, total height: 3,350 mm, suspension: air, tire size: 205/65R17,5, wheelbase: 2,200 mm, color: other, Year of construction: 2023, Number of axles: 1, Payload: 3015 kg, Tare weight: 1610 kg, Gross vehicle weight: 4625 kg, Chassis type: Full chassis = Further information = General information Cab: Day cab License plate: OT-90-SY Powertrain Fuel type: Diesel Transmission Lrsdpfjyx Td Hjx Aiien Transmission: Manual Axle configuration Tire size: 205/65R17.5 Brakes: Drum brakes Suspension: Air suspension Axle 1: Tire tread depth left: 3 mm; Tire tread depth right: 2 mm Weights Unladen weight: 1,610 kg Payload: 3,015 kg GVW: 4,625 kg Functional Loading platform height: 95 cm Environmental Emission class: Euro 0 Condition Technical condition: good Optical condition: good Damage: none Financial information Leasing price: €834 per month (delivery van, 72 months); Please inquire for further information and terms.

Condition: used, mileage: 358,000 km, power: 194 kW (263.77 HP), first registration: 05/2021, fuel type: diesel, axle configuration: 4x2, wheelbase: 5,700 mm, fuel: diesel, brakes: engine braking, color: white, emission class: euro6, suspension: steel-air, number of seats: 2, total length: 9,600 mm, total width: 2,550 mm, permissible axle load (axle 1): 7,500 kg, permissible axle load (axle 2): 11,500 kg, loading space length: 7,600 mm, loading space width: 2,500 mm, loading space height: 2,650 mm, Year of construction: 2021, Equipment: ABS, central locking, cruise control, electric window regulation, power mirror, tail-lift, General information Number of doors: 2 Registration number: 89-BRP-3 Technical information Number of cylinders: 6 Engine capacity: 6.700 cc Front axle: Max. axle load: 7500 kg; Tyre profile left: 25%; Tyre profile right: 25%; Suspension: leaf suspension Rear axle: Double wheels; Max. axle load: 11500 kg; Tyre profile left inner: 50%; Tyre profile left outer: 50%; Tyre profile right outer: 50%; Tyre profile right outer: 50%; Suspension: air suspension Weights Empty weight: 8.649 kg Carrying capacity: 10.351 kg GVW: 19.000 kg Functional Tail lift: Dhollandia, 1998 kg Financial information Price: On request = Additional options and accessories = - Aluminium fuel tank - Hardwood floor - Heated driver's seat - Heavy duty engine brake - LED- lighting - Lock diff - Outside temperature display - Radio/CD player - Visor Lrsdpfezdpgxex Aiijn - Wooden floor = Remarks = Geisoleerde Hertogs box Dhollandia 2.000 kg 2x Biding rails Rolstop

Condition: used, Year of construction: 2024, _____Basic equipment: two ploughshares mounted on the frame with king pin Collision protection via spring flaps Center pin secured against accidental triggering Hydraulic swivel device left-right Hydraulic installation with 4 quick hydraulic couplings and 1 unpressurized return connection Kerb deflector left-right Three-point mounting plate CAT 2N, 2 and 3N Overpressure valve Double-acting swivel cylinder Pendulum compensation up to 8° Adjustable sliding skids Central sliding skid with PU foot Spacer block for 40° end stop angle Municipal paint RAL 2011 Warning flags with holder LED lighting (only from 260 to 340) Steel scraper barOptional equipment:Three-point linkage Cat IIBoundary lights Selector valve for synchronous control 12 VSteel scraper barPicture serves as an example,Location:null Lrjdpeu Hv Szofx Aiisn

Condition: good (used), Year of construction: 2006, operating hours: 9,911 h, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 270 mm, travel distance Z-axis: 310 mm, rapid traverse X-axis: 75 m/min, rapid traverse Y-axis: 75 m/min, rapid traverse Z-axis: 75 m/min, nominal power (apparent): 17 kVA, total height: 2,300 mm, total length: 1,500 mm, total width: 2,600 mm, overall weight: 3,400 kg, spindle speed (max.): 30,000 rpm, spindle nose: HSK40, number of slots in tool magazine: 40, input voltage: 400 V, Equipment: documentation/manual, CNC machining center CHIRON FZ08 KS Magnum High Speed Plus (HSP) TECHNICAL CHARACTERISTICS: Year of manufacturing: 2006 CNC control : FANUC 18i-MB5 Number of axes : 7 Stroke X axis : 450 [mm] Stroke Y axis : 270 [mm] Stroke Z axis : 310 [mm] Traversing feeds X, Y and Z axes : 75000 [mm/min] Max. bar diameter in turning spindle : 32 [mm] Main spindle max. speed : 8000 [rpm] Main spindle max. power : 12 [kW] Angular A axis stroke : 360 [°] A axis indexing precision : 0.001 [°] B axis swivelling stroke : -20° / +115 [°] B axis indexing precision : 0.001 [°] Spindle type : HSK40 Max. spindle speed : 30000 [rpm] Tool changer magazin number of stations : 40 Part turnaround by robot (6th side machining) : Yes RS232 Interface : Yes Total power required : 17 [kVA] Supply voltage : 400 [V] Number of running hours : 9911 [h] Dimensions : 1500 x 2600 x 2300 [mm] Weight : 3400 [Kg] EQUIPMENT INCLUDED: x1 RENISHAW TS27R tool probe x1 spindle cooling unit Lrodpfxox Iiw Ij Aiien x1 parts catcher x1 coolant tank x1 unit for 6th face machining (gripping system not included) x29 tool holders type HSK40 BIG KAISER x10 collets type F37 SCHAUBLIN x1 washing gun x1 3-color status light x1 maintenance manual x1 electrical diagrams manual x1 operator's manual x1 programming manual Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed Machine similar to brands such as Okamoto, ELB, GER, Tacchella, Karstens, Jones & Shipman, Jung, Favretto, Blohm. Internal and external grinding (ID/OD) also to be considered. Surface grinder, lathe, machining center, milling machine.

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 270 mm, travel distance Z-axis: 310 mm, rapid traverse X-axis: 75 m/min, rapid traverse Y-axis: 75 m/min, rapid traverse Z-axis: 75 m/min, nominal power (apparent): 17 kVA, total height: 2,300 mm, total length: 1,500 mm, total width: 2,600 mm, overall weight: 3,400 kg, spindle speed (max.): 30,000 rpm, spindle nose: HSK40, number of slots in tool magazine: 40, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, CNC Machining Centre CHIRON FZ 08K S Magnum High Speed Plus (HSP) TECHNICAL CHARACTERISTICS: Year of manufacturing: 2007 CNC control: FANUC 18i-MB5 Number of axes: 7 Stroke X axis: 450 [mm] Stroke Y axis: 270 [mm] Stroke Z axis: 310 [mm] Traversing feeds X, Y and Z axes: 75000 [mm/min] Max. bar diameter in turning spindle: 32 [mm] Angular A axis stroke: 360 [°] A axis indexing precision: 0.001 [°] B axis swivelling stroke: -20° / +115 [°] B axis indexing precision: 0.001 [°] Spindle type: HSK40 Max. spindle speed: 30000 [rpm] Tool changer magazin number of stations: 40 Total power required: 17 [kVA] Supply voltage: 400 [V] Lrsdpfx Aoyq Nyyjiien Dimensions: 1500 x 2600 x 2300 [mm] Weight: 3400 [Kg] INCLUDED EQUIPMENT: x1 RENISHAW tool probe, type TS27R x1 spindle cooling unit x1 coolant tank x1 unit for 6th-face machining x1 SCHUNK clamping vice x84 tool holders - type HSK40 x14 collets - type F35 x1 electrical cabinet air conditioning unit x1 DONALDSON mist extraction unit - type Torit DCE x1 washing gun x1 three-color status light x1 MACHINING INSTRUCTIONS manual x1 operator manual x1 programming manual Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. Machines similar to Mikron, Hermle, DMG MORI, Mazak, Hedelius, AXA, Chiron, Matec, Reiden, Lagun, Haas, and Alzmetall, as well as CNC milling, drilling, and tapping machines, and CNC grinding machines

Condition: used, pneumatischer Linearantrieb nutzlänge 625 mm Lodpfehkr Dtex Aiijrn

Condition: used, mileage: 119,480 km, power: 103 kW (140.04 HP), first registration: 03/2022, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 5, Year of construction: 2021, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Equipment: * Body/Configuration: High-roof panel van, double cab * Trendline model * Comfort Plus driver and front passenger seat * Rear compartment seats: 1st row, 3-seater bench * Air conditioning * Auxiliary heater * Heated windscreen washer nozzles * Rear step integrated into bumper * Privacy glass at the rear * Chrome package * Partition wall behind the 2nd seat row * Sliding door on the right with intermediate locking position Technology: * Audio navigation system Discover Media * Streaming & Internet (touchscreen, USB) * Digital radio reception (DAB+) * Cruise control * Electrically adjustable and heated exterior mirrors * Driver assistance system: front and rear parking sensors * Reversing camera * Multifunction display Plus Safety/Environment: * Driver and front passenger airbags * Driver assistance system: hill start assist * Driver assistance system: crosswind assist * Emergency call system * Low emission according to Euro 6d emissions standard * Engine start/stop system Miscellaneous: * 1 previous owner Ledpsyxa Avofx Aiijrn * German first registration * 2.0 litre – 103 kW TDI engine * Wheelbase 4490 mm * Perm. gross weight 3.50 t * Truck registration * COC document available Tow bar retrofitting available at extra cost. Since 1972, your reliable partner for automobiles/commercial vehicles in 28832 Achim at Bremer Kreuz. NutzfahrzeugZentrum Behnke always has around 200 vehicles available, ranging from vans and commercial vehicles to construction machinery! We continuously offer attractive financing options at special rates. On request, we will gladly provide a personalised offer! Trade-in of your commercial vehicle/construction machinery is welcome. If a new TÜV inspection is required, we will be happy to submit an offer via our partner workshops. Our offer is generally WITHOUT a new TÜV inspection. Delivery of your "new" commercial vehicle can be organised by our external partners at extra cost. The details provided in advertisements, on the internet, on price tags, and in images are non-binding descriptions and do not constitute guaranteed characteristics. The seller assumes no liability/warranty for errors in typing or data transmission. Equipment listed may need to be checked separately if necessary. Subject to error and prior sale.

Condition: used, mileage: 64,379 km, power: 103 kW (140.04 HP), first registration: 02/2022, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 03/2028, color: white, gearing type: mechanical, emission class: euro6, number of seats: 6, Year of construction: 2021, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Equipment: * Body/Configuration: High-roof panel van with double cab * Heated driver and front passenger seats * Dual passenger bench with storage/compartment * Rear compartment seating: 1st row, 3-seater bench * Sliding door on right with intermediate stop * Rear windows tinted * Cargo partition behind 2nd seating row * Convenience Package 2 * Sortimo workshop shelving Technology: * Discover Media audio-navigation system * Streaming & Internet (touchscreen, USB) * Digital radio reception (DAB+) * Multifunction steering wheel * Lighting & Visibility Package * Electrically adjustable and heated exterior mirrors * Driver assistance system: front and rear parking sensors * Rear-view camera * Multi-function display Plus Safety/Environment: * Driver and passenger airbags * Driver assistance system: hill hold assist * Driver assistance system: crosswind assist * Emergency call system Lodpfxsy Si Eye Aiijrn * Low emission according to Euro 6d standard * Engine start/stop system Miscellaneous: * One previous owner * German first delivery * Truck registration * Engine: 2.0 L – 103 kW TDI * Wheelbase: 4,490 mm * Permissible total weight: 3.5 t * COC document available Since 1972, your reliable partner for automobiles and commercial vehicles in 28832 Achim at Bremer Kreuz. NutzfahrzeugZentrum Behnke always stocks around 200 vehicles, including transporters, commercial vehicles, and construction machines! We continuously offer you attractive financing options at special rates. If interested, we are happy to provide you with an individual quote! We welcome trade-ins of your commercial vehicle or construction equipment. If a new TÜV inspection is required, we will be happy to offer you a quote from our partner workshops. Our offer does NOT include a new TÜV inspection as standard. Delivery of your "new" commercial vehicle via our external partners is available at an additional charge. The information provided in ads, online listings, price tags, and images are non-binding descriptions and do not constitute guaranteed properties. The seller assumes no liability/warranty for typing or data transmission errors. Listed equipment may need to be checked separately. Subject to error and prior sale.

Condition: ready for operation (used), 1 x stitching unit 380 2 x stitching heads HK75Q 1 x Touch screen Navigation control 1 x oblique sheet saddle monitor 1 x remote control inch 4 x section feeders 370 Lodpfxsyuk S Sj Aiisrn 1 x cover folder feeder 1529 1 x three knife trimmer 449 1 x stream delivery 1564 Optional; 2 x loop stitching heads 1 x Rima stacker

Condition: new, Year of construction: 2026, AUTHORIZED DEALER Company PROD-MASZ. Lsdszdcmyepfx Aiijrn BENDING BENCH technology Halver, YOUR competent partner when it comes to BENDING BENCHES Folding bench RED Plus 2200/1,2 from the company Prod - Masz to try on site and to take away. You will receive professional instruction on site. Technical specifications: -Working width 2140mm - Sheet metal thickness up to 1,2mm -Non-ferrous metals 30% more sheet thickness -Bending angle up to 165° -Bending beam: 15 mm - Passage: 80 mm -degree scale -Stop for preset bending angles - Shelf for sheet metal -Front depth stop -Weight about 420kg Other dimensions (1000,1440,2140,2640,3140,3640,4140mm) on request Accessories - roller scissors (up to 0.8mm) 350EUR Shipping within Germany 180 EUR All prices are plus 19% VAT. Self pickup Certificate CE Guarantee: 12 months. Self pickup

Condition: used, mileage: 295,913 km, power: 103 kW (140.04 HP), first registration: 02/2019, fuel type: diesel, overall weight: 3,500 kg, gearing type: mechanical, emission class: euro6, number of seats: 5, Year of construction: 2018, Equipment: ABS, air conditioning, navigation system, parking heater, soot filter, VW Crafter 2.0 TDI, medium wheelbase, with 5 seats, featuring: air conditioning, navigation, auxiliary heater with remote control, electric windows, tilting window in the second row of seats. - Special features: Second battery with battery monitoring; driver and passenger airbags; passenger airbag can be deactivated; Discover Media audio navigation system (touchscreen color display); electrically adjustable and heated exterior mirrors; driver assistance systems: front and rear parking sensors; chassis: reinforced suspension and shocks; sliding windows in cargo/passenger compartment: front left and right; vehicle without cargo partition; Climatic air conditioning (driver’s cab) with second evaporator; side marker lights; smoker's package; spare wheel in matching tire configuration including on-board tools and jack; rear door hinges with increased opening angle; comfort seats for driver and front passenger; auxiliary heater with remote control; 4 x 12V power sockets in the cab; rear entry step integrated in bumper; half-height plastic cladding in the cargo/passenger compartment. Additional equipment: Convex exterior mirrors left and right; LED indicators integrated into exterior mirrors; rubber floor covering in cab; aerodynamic underbody paneling; dual headlights; twin-tone horn; grab handle on rear left and right roof pillars; hill start assist; brake assist system (HBA); crosswind assist; front electric window lifters; laminated safety glass windscreen; grab handles on A-pillars; rear wing doors without windows; LED interior lights in cab and cargo/passenger compartment; body type: standard panel van; roof type: standard roof; 75-litre fuel tank; front radiator grille with upper chrome trim; steering column (steering wheel) adjustable; headlight beam adjustment; N1 homologation (commercial vehicle registration); engine: 2.0 L - 103 kW TDI; rear fog light; wheelbase: 3640 mm; tire repair kit; low-emission as per Euro 6 emissions standard; right-side sliding door in cargo/passenger compartment; SCR system (AdBlue technology); electro-mechanical power steering; seat upholstery: fabric; 6.5x16 steel wheels; start/stop system; front bumper in grey with colour-coded trim; lashing points in cargo area; driver's seatbelt warning system; heat-insulating glazing; central locking with remote and interior actuation; permissible gross vehicle weight: 3.5 t. Ledjyt Uzzspfx Aiiorn - Financing available via our partner banks. We are happy to assist you. Please note: subject to prior sale as this item is also offered on other platforms. Accessory specifications provided without guarantee. Changes, prior sale, or errors excepted. We offer and strongly recommend a viewing and inspection to ensure buyers have an accurate understanding of condition and suitability. Viewings and inspections are possible at any time by appointment and are expressly encouraged.

Condition: ready for operation (used), Year of construction: 1985, An old but fully functional IMA double-end profiler is available. Working width: 2000mm, max. cutting height: 35mm, machine dimensions X/Y/Z: approx. 4000mm/6000mm/3000mm, weight: approx. 3000kg. Documentation available. An on-site inspection is possible. Lrsdpfjzc Rdksx Aiisn

Condition: used, Year of construction: 2022, controller manufacturer: Siemens, controller model: 840 DSL - Celos, _____ Description: Year of manuf. : 2022 Control : Siemens 840 DSL - Celos Speed : 20000 rpm Movement X/Y/Z : 2600/1100/900 mm Lrsdpfx Ajzbgcgsiion Tool holder : SK 40 In General: Year of manufacture:2022 Control system:Siemens 840 Dsl - Celos Travel ranges X/Y/Z:2,600/1,100/900 mm Spindle speed:20,000 rpm Tool holder:SK 40 Spindle: Technology:Direct drive spindle Speed:20,000 rpm Max. power:35 kW Max. torque:120 Nm Tool holder:SK 40 NC swivel head: Technology:Swivel axis (B-axis) Travel range:+/- 100° Work table: Technology:Fixed table with integrated NC rotary table Total clamping area:3,200 x 1,100 mm Total table load capacity:4,000 kg/m Clamping area of NC rotary table:1,050 mm Max. table load capacity of NC rotary table:1,200 kg/m C-axis:360° Tool magazin: Technology:Chain magazine Number of stations:120 Tool changer:Double gripper with ATC shuttle Max. tool diameter:130 mm Max. tool length:300 mm Equipment: Position measurement systems:Direct on all axes (glass scales) Chip removal:Chip conveyor Coolant supply:CTS system, 80 bar Tool measurement:BLUM laser Workpiece measurement:Heidenhain TS 460 Kinematics measurement:3D quickSET ready Emulsion mist separators:2 units, mechanical Process monitoring:Operating mode 4 Set-up mode:Electronic handwheel