Used Pegas Gonda Band Saw for sale (8,335)

Condition: good (used), Artiglio ST 80 band resaw -technically tested and newly painted Pjdpfeucnt Tox Ahcsra

Condition: good (used), Code: 0221 Brand: CENTAURO Model: CO 700 - CE Standard Band saw with covered wheel for cutting wood materials, joinery, furniture, furnishings, window frames , doors, plastics, aluminum, composite materials and various - CE Standard Technical data: Diameter of flywheels mm 700 Prsdszligzepfx Ahcsa Width of flywheels mm 40 Max cutting height mm 435 Height of worktable from ground mm 940 Min/max blade length 5040/5180 Motor power Hp 4 Diameter of suction mouth mm 100 Tilting table Overall dimensions: mm 1350 x 800 x 2300 h Weight kg 400

Condition: used, Year of construction: 2018, functionality: fully functional, The MSK a.s. line, dating back to 2018, has been supplemented with a vertical band saw from J.Bögli AG. This line was built in 2018, while the band saw is an older model. The band saw can cut logs ranging from 30 cm to 100 cm, with a maximum log length of 10 meters. The line is designed for a maximum length of 5 meters. In cases where longer logs need to be cut, the discharge from the band saw can be handled using conveyors no. 15 and no. 16. The prism cutting saw has a minimum length of 800 mm and a maximum length of 5 meters. The double-shaft sweep saw has a maximum height of 215 mm and a width of 600 mm. Pedpfx Ahozta Ifocora In 2024, the line was further enhanced with a Skywood double-shaft circular saw for cutting thinner logs, ranging from 12 cm to 46 cm. The minimum log length is 2 m, and the maximum is 5 m. The line can operate in parallel (with both the band saw and the Skywood saw running simultaneously) or separately, using either machine independently.

Condition: used, Year of construction: 2021, functionality: fully functional, Felder FB 510 vertical band saw, purchased on May 26, 2021, for cutting curves, making longitudinal cuts, and performing shaped cuts in wood and wood-based materials. A robust workshop machine for cutting, model making, furniture construction, and training purposes. Key technical data: - Machine type: Vertical band saw - Model: Felder FB 510 - Cutting height: approx. 410 mm - Cutting width / throat depth: approx. 480 mm - Roller diameter: approx. 500 mm - Table size: approx. 500 x 640 mm - Table tilt: approx. -10° to +45° - Saw band length: approx. 4318 mm - Saw band width: approx. 6–25 mm - Cutting speed: approx. 1100 m/min or 1450 m/min, depending on the model - Motor power: approx. 3.0 kW / 4.0 hp - Dust extraction: 2 dust extraction connections, approx. 120 mm each, depending on the model - Weight: approx. 250 kg - Versatile machine for curved cuts, contour cuts, ripping, and general cutting - Suitable for solid wood and wood-based materials - Ideal for woodworking shops, model making, training facilities, and makerspaces No guarantee. Prsdpfx Aszun Szshcoa

Condition: used, Year of construction: 2007, functionality: fully functional, used horizontal ZENZ block bandsaw type BN 110 S, stationary Year of manufacture: 2007; completely overhauled in 2022 Conveying technology year: 2022 Serial number: 141-8300 Equipment: • 22 kW drive motor • 7 m cutting length • 5 vertical supports • 2 log turners (+2 holders) • Log lifting preparation with frame • 4 level compensators with claws (+2 holders) • 1 log roller • 1 new pre-cutter • PLC control including cutting program • Seat mounted on armrests • Left: PLC - Right: joystick • 1 Zenz automatic sharpening machine type AHB (serial no.: S-1012) • 4 bandsaw blades 6000x100x1.1 stellite for softwood (prod. no.: AB 0) Prodpfx Ajwlfdxohcja • 4 bandsaw blades 6000x100x1.1 stellite for hardwood (prod. no.: AB 0) • Water cooling with 20 l tank and nozzle o Mounted on blade guide • Log lifting system o With 3 log lifting arms o With 2 cylinders • Log lifter preparation in frame o With control unit o Mount for pipe o Two mounts for cylinders • Hydraulic frame ejector for 820 mm • Green horizontal laser indicator Mechanisation consisting of: • Hydraulic folding frame for offloading at the saw with electrically driven roller conveyor • Electrically driven roller conveyor with hydraulic ejectors o Both roller conveyors operate simultaneously • Roller table 4 m long – slightly inclined with stop o All electric and hydraulic elements operable from the operator’s station The block bandsaw including conveyor technology is fully operational.

Condition: used, Year of construction: 2020, Industrial bandsaw CENTAURO SUPERCUT 80 Prodpfx Ajzvflnjhcsa BANDSAW FOR THIN SLICES WITH THE HIGHEST PRECISION The major advantages of a compact and versatile machine for all applications in the field of thin slicing: Thin slicing from 2 mm material thickness Maximum cutting accuracy up to 0.15 mm Minimum cutting kerf from 1.3 mm Ideal for cutting dry and wet wood as well as alternative materials The surface of the thin lamella can be glued directly, without any further post-processing being required User-friendly electronic control Two programmable feed speeds of the conveyor belt from 0 to 30 m/min for optimal cutting quality and a longer service life of the saw blade Optical sensor for starting the cutting cycle and for automatic speed switching Ground work table Flexam feed belt for optimal performance 6 height-adjustable rubber pressure rollers, whose position can be adjusted to open/close, in order to ensure the optimal pneumatic clamping pressure on the workpiece during the feed and cutting process Oleopneumatic saw blade tension for optimal cutting performance Upper and lower Chaco saw blade guides, which ensure optimal stability of the saw blade during the cutting process Internal and external lubrication of the saw blade for removing resin residues and chips 4 dust extraction connections to optimize the extraction of dust and chips Maximum cutting height 400 mm (optional 500 mm) Maximum cutting width 400 mm Powerful quality motor with 15 kW (20 hp) Ethernet interface for online service and remote maintenance Carbide or stellite saw blades for optimal cutting performance Maintenance-friendly design and easy service

Condition: excellent (used), Year of construction: 1970, functionality: fully functional, Horizontal band saw from Nobis, manufactured in 1970 The saw is fully functional and has a cutting width of approximately 1.2 m. It features its own carriage with a width of 1.15 m and a length of 10 m. Equipped with a mechanical log clamp. A sharpening device can also be offered if required. We have other used band saws available: 1.) Wehrhahn horizontal saw 145 Used, fully functional Cutting width: max. 145 cm, logs up to approx. 1.70 m can be cut Dimensions of saw carriage: 8 m length x 133 cm width (overall width: 155 cm) With 6 mechanical clamping devices Drive: 30 kW motor Circular saw attachment for core separation available Podpfeyk D Dmjx Ahcjra Price: €23,900 Optional extras: Complete sharpening room: €9,500 Replacement gearbox: €2,000 Swivel crane: €5,000 2.) Nienkemper BS0 horizontal band saw from 1955 In good working condition Frame width: 130 cm Blade guide width: 121.5 cm Cutting capacity: Logs up to 115 cm without turning Theoretically up to 120 cm without turning Larger diameters possible by turning the log Solid, stable frame construction for easy installation Wheels: 1050 mm x 110 mm Includes: Newly rebuilt carriage (1.20 x 6.00 m) New axles Overhauled clamping clamps Price: €29,900 If you are interested, please feel free to contact us. Prices can be negotiated by phone. Shipping is possible upon request.

Condition: ready for operation (used), Year of construction: 2024, machine/vehicle number: Ser.-Nr. 22212875, Metal bandsaw Bekamak BMSO 320, year of manufacture: 09.2024, with roller conveyor, approx. 3 meters in length. The machine is available for purchase via an online insolvency auction on our website. Psdpfx Ahozumf Tecjra You can access the auction by clicking on the link in the advertisement.

Condition: used, Year of construction: 2002, functionality: fully functional, Blade length up to 275 mm Year 2002 Automatic cutting cycle Blade descent on columns Blade speed variation Descent speed adjustment Blade cleaning brush Loading stroke 500 Pjdpozq Dpuefx Ahcjra Pressure reducer for clamps BLADE HEIGHT 27 mm

Condition: new, Year of construction: 2026, The CORMAK HBS275 band saw for cutting tubes, profiles and bars is widely used in all locksmith and metalworking workshops where precision, quality and cutting speed matter. The model is equipped with a 0-60° swivel arm; the saw guides are based on sintered carbide. The frame construction ensures accurate and quiet operation. Machine characteristics The horizontal metal band saw with swivel arm enables cutting in a plane perpendicular to the axis of the material being cut and at any angle within the range from 0 to 60°. The material to be cut can be fed manually or by any mechanical device, while the tool feed is automatic. The blade guides are equipped with special carbide plates and bearings. This has a major impact on blade guidance, service life, straightness, accuracy and cutting quality. Carbide guidance greatly reduces wear of the machine and blade. The machine is equipped with an efficient coolant pump with a closed coolant circuit. The saw arm is made of a single cast-iron casting and, together with the 27 mm wide cutting blade used in this saw, fully enables multi-series cutting of both profiles and solid materials. The vice is located in an adjustable bed and is equipped with a quick clamp. The blade guides are equipped with hard metal plates – sintered carbide and a rolling bearing system. It is precisely the SINTERED CARBIDE GUIDES that are responsible for the precision and straightness of the cut. The arm has been inclined at an angle of 25°, which increases blade durability and improves cutting conditions. A cleaning brush is mounted at the bottom of the arm to achieve excellent cleanliness and blade operation. The machine drive is transmitted via a worm gearbox. The machine has a three-phase motor with two cutting speeds and motor thermal protection. Predpoudi Unjfx Ahcja The shape of the upper part of the base forms a tray for draining coolant and collecting chips generated during material cutting. A cast-iron work table with a swivel arm and a control panel on a separate arm is mounted to the base. In the cutting process, the main cutting movement is the movement of the cutting blade, while the feed is the lowering of the arm. The arm lowering speed (cutting speed) is regulated by a hydraulic cylinder. The feed speed is adjusted on the saw control panel. Two cutting blade speeds are available: 37.5 and 75m/min. In the lower position of the arm (after cutting the material), the cutting blade drive is switched off automatically. Safety is ensured by cutting blade guards and micro-switches that stop the motor after the cutting cycle is completed or when any guard is opened; additional protection consists of automatic shutdown of the saw in the event of cutting blade breakage. The machine drive is transmitted by a motor with a worm gearbox. The motor with thermal fuse protects against overheating during operation. Technical data TOTAL POWER 1.5kW POWER SUPPLY 400V 50Hz ARM LOWERING ADJUSTMENT hydraulic cylinder BLADE LENGTH 2450 x 27 x 0.9 mm BLADE SPEED 37.5 / 75m/min VICE BASE HEIGHT 900 mm MACHINE DIMENSIONS (WITH ARM RAISED) (L x W x H) 1720 x 800 x 1800 mm WEIGHT 215 kg

Year of construction: 2007, condition: ready for operation (used), Cutting range round: 560mm, cutting range flat (W x H): 620/560mm, material feed length, single: 900mm, multiple feed: 9999mm, shortest cut length: 6mm, minimum diameter to be cut: 15mm, minimum remnant in single cut: 15mm, shortest remnant length in automatic mode: 80mm, saw motor power, frequency-controlled: 5.5kW, cutting speed, stepless: 13-127m/min, saw blade dimensions: 7400/54/1.6mm, material support height: 700mm, total drive capacity in basic configuration: 12kW, length: 2370mm, width: 3610mm, overall dimensions with chip conveyor (L/W): 2370/3610mm, machine table height lowered: 2230mm, weight: approx. 5.2t with chip conveyor. An inspection on site is possible. Prodpfx Aexg Rhvohcja

Condition: new, Year of construction: 2026, Automatic Band Saw CORMAK H400SA The CORMAK H400SA automatic band saw is a high-performance machine designed for precise and repeatable cutting of large steel components, pipes, and closed profiles. Thanks to its double-column construction and automated operating cycle, it is an ideal solution for production plants, steel fabrication workshops, and logistics centers processing large quantities of material. Main advantages of the machine Fully automatic operation – complete cutting cycle without operator intervention: from material clamping, through cutting, to arm return. Hydraulic feeding system and vice – ensure fast, safe, and precise cutting. Arm and vice position memory – reduces cycle time and increases efficiency during serial production. Cooling system and powered cleaning brush – extend the service life of the metal cutting band saw blade. Large cutting capacity – allows cutting materials up to Ø400 mm or 400 × 400 mm. Construction and technology The double-column band saw H400SA is based on a stable steel structure with a cast iron body, ensuring maximum rigidity and effective vibration damping. The saw frame is positioned at a 3° angle relative to the feeding table, which improves cutting performance when processing profiles and structural sections. Precision and work efficiency The hydraulically controlled arm movement with adjustable cutting force and a precision throttle valve allows the cutting pressure to be adapted to the specific material. The hydraulic feeding system with an electronic controller enables programming of the cutting length and the number of pieces. The LCD display provides information about the cutting progress, errors, and material availability. The automatic stop system reacts to faults or completion of the programmed cutting cycle, reducing downtime and improving operational safety. Applications The CORMAK H400SA automatic band saw is perfectly suited for: metalworking and steel construction industries, profile and structural section processing centers, serial production in fabrication workshops and industrial plants, companies cutting materials to required lengths. Standard equipment Automatic operating cycle Arm and vice position memory system Predpfxoyctr Ro Ahcea Hydraulic power unit and feeding system Powered blade cleaning brush Coolant circulation system Bimetallic metal cutting band saw blade CE declaration of conformity Operating and maintenance documentation (DTR) Technical data Parameter Value Cutting capacity Ø400 mm or 400 × 400 mm Saw blade dimensions 4900 × 41 × 1.3 mm Blade speeds 40 / 60 / 80 m/min Main motor power 4.6 kW Hydraulic unit motor power 1.5 kW Coolant pump power 0.09 kW Feeding stroke 500 mm Machine dimensions (L × W × H) 2600 × 2400 × 1700 mm Weight 2100 kg

Condition: used, Year of construction: 1971, roll diameter / mm throat / mm workpiece height / mm table-size 800x750 mm Technical specifications: Roll diameter approx. 420mm Projection in width approx. 415mm Projection in height approx. 265mm Table size approx. 605 x 600 mm Belt speed 18 - 562 m/min. 8 levels Saw band length min./max. 3150 / 3260mm - Saw band speed over 4 gear stages and 2 engine speeds Pjdpowgi R Sjfx Ahcera - Saw blade butt welder IDEAL BS 0-16 with scissors and whetstone - swiveling work table in 2 axes Dimensions: approx. L x W x H 950 mm x 750 mm x 1900 mm Weight 600kg with table feed Description has been adopted.

Condition: ready for operation (used), Cutting range round 90°/30°: 320mm/250mm, cutting range square 90°/30°: 320mm/240mm, max. profile capacity: 500mm/320mm, max. workpiece height: 320mm, throat depth: 520mm, saw band dimensions X/Y/Z: 4600mm/32mm/1.1mm, band speed: 96m/min. Machine dimensions X/Y/Z: approx. 2200mm/1400mm/1400mm, weight: approx. 800kg. An on-site inspection is possible. Pjdpfx Ajw U Uamehcsra

Condition: used, Year of construction: 2007, DOALL TYPE: C4100 NC AUTOMATIC FEED Pedow U N I Eopfx Ahcora YEAR: 2007

Condition: excellent (used), Year of construction: 2022, machine/vehicle number: AE0454, functionality: fully functional, Working area: Round material: 460 mm Square material: 460 x 460 mm Band speed: 16 - 120 m/min Prsdpfx Aoztbt Nshcea Motor: 4 kW Blade size: 5730 x 41 x 1.3 mm Machine weight: 3,000 kg Machine dimensions: L=2,800, W=2,400, H=2,100 mm

Condition: used, roll diameter / mm throat / mm workpiece height / mm With saw blade welder Mod: BSO Tape width: 16mm Volts: 360 Hz: 50-60 Amp: 5.2 . 91622F Saw blade length max.: 4250mm Saw blade length min.: 4150mm Predpfx Aeikggdehcoa Table dimension: 600x600mm Max working length: 1120mm

Year of construction: 1985, condition: good (used), Offer 21135 Prjdpfog Aid Ssx Ahcoa Technical data: - Roller diameter: 420 mm - Overhang: 410 mm - Max. passage height: 265 mm - Table size: 600 x 600 mm - Table, left and right, can be tilted by 15 / 30° - Table height from the floor: 1020 mm - Saw blade length: 3150 - 3260 mm - Saw band width: 3 - 16 mm - 8 cutting speeds, approx.: 18 - 562 m/min - Drive: 400 V / 1.1 / 1.7 kW - Weight, approx.: 650 kg - Space requirement, approx.: W 900 x H 1900 x D 1000 mm - Electric foot switch

Condition: good (used), Code: 0347 Brand: CENTAURO Model: CO 800 - CE Standard Band saw with covered wheel for cutting wood materials, joinery, furniture, furnishings, window frames, plastics, aluminum, composite materials and various - CE Standard Technical data: Cast iron flywheel diameter mm 800 Podpfeyxmm Iox Ahcsra Max cutting height mm 520 Height of table from floor mm 960 Table dimensions mm 1170 x 800 Max blade length mm 5670 Motor Hp 5,5 Tilting work table Telescopic blade guard N° 2 suction inlets diameter 120 mm Overall dimensions: mm 1550 x 850 x 2500 h Weight kg 630

Condition: like new (used), Year of construction: 2025, functionality: fully functional, Horizontal thin-cutting band saw 300 mm working width, tillable 12 degrees New 2025 model with bigger wheels and inverters on wheels. Psdezlqvqopfx Ahcjra 80 mm blade width Touchscreen Schneider, PLC and Inverters Schneider Germany 22.0 KW saw motor Bigger wheels for higher cutting speed Frequency controllers on the wheels for adjustable cutting speed. For slats from 2 mm * same as new *

Condition: new, Year of construction: 2026, Holzkraft band saw HBS 633 S (IE3) In a heavy professional version with a saw blade quick-clamping system for professional users Article number: 5150063 DESCRIPTION Heavy professional version with a high weight for maximum smooth running Particularly smooth and precise running thanks to the torsion-free machine housing Large-dimensioned gray cast iron saw table made from one piece, swivels from 0° to +45° with a ground and polished surface Patented table tilting device with handwheel and rack Saw blade quick clamping Precision saw blade roller guide Fast and precise cutting height adjustment via handwheel and rack with millimeter scale Safety switch for automatic shutdown when the door is opened Large cast parallel stop With angle stop as standard Prodpfovk Sfbsx Ahcja Table tilt via rack and handwheel TECHNICAL DATA Dimensions and weights Length (product) approx. 1190mm Width/depth (product) approx. 820mm Height (product) approx. 2063mm Weight (net) approx. 377.7kg Extraction connection Extraction nozzle diameter 2 x 120mm Work table(s) Work table length 830mm Work table width 600mm Work table height 830mm Work table inclination 0 – 45° Explanation of work table inclination For safety reasons, a holding device/stop must be installed from 20° to prevent the wood from slipping! Electrical data Connection voltage 400V Mains frequency 50Hz Output power 4.1kW Cutting ranges Cutting height max. 90° 400mm Cutting width max. with stop 570mm Cutting width max. without stop 610mm Saw blade Saw blade speed(s) 1615m/min Flywheel diameter 630mm Saw blade length 4600mm Saw blade guide Precision guide top and bottom Location: from stock 54634 Bitburg - available immediately -

Condition: excellent (used), functionality: fully functional, cutting height (max.): 1,250 mm, Vertical bandsaw SCHULTE Type VB12 The machine is fully operational and functional – with new electrical installation and control system. The set includes feeders, conveyors, and operator cabin – all visible in the photos. Psdpfsyivhnox Ahcera Max. cutting height: 1250 mm Max. diameter of processed log: 1450 mm Length of hydraulic carriage: 5700 mm Main motor power: 55 kW Exact dimensions are shown in the drawing attached in the photos.

Year of construction: 2004, condition: ready for operation (used), Wheel diameter: 600mm, working height: 955mm, max. cutting height: 140mm, clearance height: approx. 5mm-300mm, clearance width: max. approx. 650mm, max. saw blade length: 5600mm, saw blade width: 8mm-25mm, max. saw blade thickness: 0.65mm, max. band speed: 1640m/min, conveyor belt speed: 0,5m/min - 5m/min, conveyor belt width: 650mm. Overall length with conveyor belt: 2820mm, overall width: 2550mm, overall height: 1800mm, machine weight: approx. 700kg. Documentation available. Inspection possible by arrangement. Podpfezuktnsx Ahcera

Condition: used, machine/vehicle number: 91902, functionality: fully functional, input voltage: 380 V, Bandsaw with saw blades for sale. Predpfx Ahszgfx Njcja Good condition. Collection only.

Condition: good (used), Engine: 18.5 kW Cutting dimensions Max log diameter: 95 cm Clearance between rollers: 73 cm Max cutting width (cant): 64 cm Max cutting height above blade: 39 cm Max cutting length: 12 m Head unit equipment Automatic cutting thickness adjustment device Head feed up/down: Electric Head feed forward/back: Electric Blade guide arm: Electric Blade tensioning system: Hydraulic with air cushion Debarking unit Sawdust extraction opening diameter: 150 mm Blade Length: 4670 mm Width: 38 mm / 50 mm Blade guide wheels Diameter: 600 mm Type: With belt Prjdpfx Aexhb Uvjhcea Material: Cast iron Full hydraulics