Used Pama Plate Drilling Machine for sale (72,249)

Condition: good (used), Year of construction: 2003, sheet width 2050 mm plate thickness 10.0 mm ST pre-bending 8.0 mm ST diameter of upper rolls ~ 220 mm side roll diameter ~ 170 mm diameter of lower rolls ~ 190 mm bending speed ca. 2.0 + 5.0 m/min Control ELAP LYNX oil volume 80.0 Liter voltage 380 V total power requirement 5.5 kW weight 5000 kg range L-W-H 3500 x 1550 x 1400 mm Current new price incl. accessories: approx. € 90.000 Special price on request Equipment: - Robust electro-hydraulic 4-roll plate bending machine Gkjdpfoz N Hxhjx Akyec - 4-roll design offers a wide range of bending and rolling capabilities - MG NC control unit "ELAP LYNX" * Operation – control of all rolls and machine axes * Digital position display * Manual operation via joysticks * Movable control panel - Two central rolls driven directly by hydraulic motors - Conical rolling possible via roll tilting - Side roll parallelism maintained via torsion shafts - Pre-bending on both ends - Diameters up to 1.1 times the top roll diameter are possible - Forged and hardened rolls (hardness: 53–55 HRC) - Low-maintenance, robust machine design - Permanent lubrication for all bearings - Sturdy welded steel construction - Selectable bending speeds (2 settings) - Electro-hydraulic drop-end bearing for easy removal of rolled parts - Pressure gauge/display for rolls - Safety system (safety trip wire with switch unit) - Operating manual (PDF)

Condition: used, There are five Friedrich Deckel FP 1 machines available. An on-site inspection is possible. Gedpfx Asz H Utaekyskc

Condition: excellent (used), Year of construction: 2009, Bernardo FM 45 V drilling and milling machine. Gkodpjvutw Hefx Akyoc The FM 45 V drilling and milling machine offers an optimal price-performance ratio thanks to the standard spindle feed. The dovetail guide of the gear head ensures maximum precision and stability. Drilling capacity in steel 32 mm Drilling capacity in cast iron 40 mm Throat 260 mm Spindle speed (12) 50 - 2520 rpm Spindle mount MK 4 Quill stroke 120 mm Quill feed (3) 0.12 / 0.19 / 0.26 mm/rev Table size 820 x 240 mm Distance spindle / table 40 - 485 mm Travel path (x / y) 550 / 190 mm Height adjustment of milling head 400 mm T-slot size 14 mm T-slot distance 55 mm Motor output power S1 100% 0.85 / 1.1 kW (400 V) Motor input power S6 40% 1.1 / 1.5 kW (400 V) Machine dimensions (W x D x H) 1150 x 850 x 1450 mm Weight approx. 285 kg Standard with automatic spindle feed and thread cutting device Large speed range 50 - 2520 rpm (12 levels) Dovetail guide for x, y and z axes, adjustable via wedge strips Versatile application options, slot milling, face milling, boring,.... Solid large cross table, precisely surface-machined Milling: spindle feed via handwheel Drilling: spindle feed via handwheel High-quality aluminum motor, designed for continuous operation Stable and vibration-free cast design Simple and quick speed change using a gear lever Pivoting milling head for angle drilling, milling bevels, etc. Location: from stock 54634 Bitburg - available at short notice -

Condition: new, bore capacity in steel (diameter) 15 / 18 mm throat 180 mm bore stroke 80 mm turning speeds 200 - 4000 U/min 250 x 220 mm distance drilling head - clamping area max. 380 mm total power requirement 1,1 / 400 kW / Volt Gedpfx Asfg U Thekyskc column diameter 65 mm tool taper MK 2 weight of the machine ca. 0,08 t dimensions 0,4 x 0,5 x 0,9 m Precise table drill: - high accuracy and quality - Drill table adjustable via rack and swiveling around the column - Full engine protection - Star grip - 230 volt mains connection

Condition: good (used), Type: SSB 3 A Machine No.: 5607 Year of manufacture: 1973 Equipment: - MK3 quill Gsdpjxlqxfofx Akyokc - Machine lamp - Quick-action drill chuck incl. morse taper arbor, clamping range 3-16 mm - Infinitely variable speeds Range 1: 0-900 rpm Range 2: 0-1700 rpm - Thread cutting device Condition: good, workshop-tested, speed variator with new bearings

Condition: good (used), Drilling capacity in steel St 37: Ø 40 mm Drilling capacity in cast iron: Ø 45 mm Spindle mount: MK 4 Overhang: 1300 mm Machine weight: 2700 kg Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany Gedpjz Icr Hofx Akyekc

Condition: ready for operation (used), Year of construction: 1994, functionality: fully functional, input voltage: 380 V, input frequency: 50 Hz, total width: 1,000 mm, total length: 2,000 mm, total height: 2,300 mm, table length: 400 mm, overall weight: 380 kg, The ayen alomat automatic veneer layering machine, a single-unit model, is in perfect working order and features an automatic glue dispensing system. It requires no additional financial investment. Gksdpfjz Rzvwjx Akyjc

Condition: used, functionality: fully functional, actuation type: hydraulic, roller (top) diameter: 420 mm, sheet thickness (max.): 25 mm, total length: 3,100 mm, Hydraulic cylinder Brand: Casanova Bending length: 3,100 mm Maximum bending thickness: 25 mm Top roller diameter: 420 mm Gkodpoydk D Hefx Akysc The side rollers are raised parallel, without inclination. New control and command panel, installed and modified in 2003. Equipped with hydraulic flag and hydraulic side table. Pit dimensions: - 200x6800 mm - 555 mm depth

Condition: used, Year of construction: 2024, DOWEL HOLE DRILLING MACHINE GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW, complete in standard design with: - Fully automatic electronic control with pulse operation via foot valve for clamping-drilling-releasing, electric intermittent operation. - Automatic retraction of the drilling unit after reaching the set drilling depth. - Automatic extension of the drilling hole depth when drilling on the end face. This eliminates the need to adjust the drilling hole depth from flat-face to end-face drilling (+10 mm, e.g. for a dowel length of 35 mm, drilling depth on the flat face 14 mm and drilling depth on the end face 24 mm). - 1 drilling bar with 21 spindles, pitch 32 mm, motor 1.5 kW (drilling feed 0-70 mm), incl. 21 quick-change chucks (Ganner system) for easy changing of the drill bits. - Easy pivoting of the drilling unit from 0° to 90°, supported by gas cylinders. - 1 clamping support movable in the Y-axis with 3 pneumatic clamping cylinders, for workpiece height up to max. 80 mm. Ideal stop system consisting of: - 1 stop rail 1800 mm for drilling shelves (aluminum profile 40x40 mm) with 3 stop blocks, with quick-change system, easily interchangeable from right to left stop side for drilling shelves in carcass structures in mirrored fashion, also suitable for row drilling in the 32 system. - Side stops and position settings, as well as the position of the drilling height above the support table, are adjusted by means of mechanical digital counters. - Side stops can be easily pivoted away, for the shortest possible conversion from carcass to frame and row drilling. - Clamping arms for the clamping support designed for row drilling positions up to max. 300 mm. - Ideal three-stage tool system. - 1 set of drill bits for dowels: - 5 carbide dowel drill bits, Ø 8x77 mm, right-hand - 4 carbide dowel drill bits, Ø 8x77 mm, left-hand Basic machine DOWEL HOLE DRILLING MACHINE GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW, complete in standard design with: - Fully automatic electronic control with pulse operation via foot valve for clamping-drilling-releasing, electric intermittent operation. - Automatic retraction of the drilling unit after reaching the set drilling depth. - Automatic extension of the drilling hole depth when drilling on the end face. This eliminates the need to adjust the drilling hole depth from flat-face to end-face drilling (+10 mm, e.g. for a dowel length of 35 mm, drilling depth on the flat face 14 mm and drilling depth on the end face 24 mm). - 1 drilling bar with 21 spindles, pitch 32 mm, motor 1.5 kW (drilling feed 0-70 mm), incl. 21 quick-change chucks (Ganner system) for easy changing of the drill bits. - Easy pivoting of the drilling unit from 0° to 90°, supported by gas cylinders. - 1 clamping support movable in the Y-axis with 3 pneumatic clamping cylinders, for workpiece height up to max. 80 mm. - Ideal stop system consisting of: - 1 stop rail 1800 mm for drilling shelves (aluminum profile 40x40 mm) with 3 stop blocks, with quick-change system, easily interchangeable from right to left stop side for drilling shelves in carcass structures in mirrored fashion, also suitable for row drilling in the 32 system. - Side stops and position settings, as well as the position of the drilling height above the support table, are adjusted by means of mechanical digital counters. - Side stops can be easily pivoted away, for the shortest possible conversion from carcass to frame and row drilling. - Clamping arms for the clamping support des Gsdpexnlflsfx Akyjkc

Condition: excellent (used), incl. rollable table 380 VAC Drilling capacity in steel: max. approx. Ø 18 mm Spindle speed 1-stage: 240 / 420 / 675 / 1100 / 1900 rpm Gkedpfxjryn Sbs Akyjc Spindle speed 2-stage: 480 / 840 / 1350 / 2200 / 3800 rpm Projection: 215 mm Tool holder: MK 2 Quill stroke: 90 mm Table clamping surface: 220 x 285 mm Cross table travel X / Y: 160 x 180 mm Power requirement: 0.72 kW Weight: approx. 85 kg Dimensions W x D x H: approx. 800 x 900 x 1740 mm

Condition: used, Year of construction: 1997, Workbench Column Drilling Machine CINCINNATI PE 32 Year of construction: 1997 Spindle: CM3 Gksdpfoz I Dimox Akysc Spindle exit: 150 mm Spindle speed: from 100 to 3800 RPM Table travel X: 290 mm / Travel Y: 150 mm Speed variator by belt variator Maxi height base/spindle nose: 500 mm Mini height base/spindle nose: 260 mm Throat depth: 300 mm Spindle sleeve diameter: Ø 80 mm Equipped with one cross table dimensions: L 430 x W 240 mm Voltage: 380 V Width: 900 mm Depth: 1100 mm Total height on base: 2000 mm Weight: approx 400 kg

Condition: used, Technical details: number of spindles: 4 bore capacity in steel (diameter): 2-16 mm bore stroke: 140 mm drill spindle - Morse Taper: MK 3 spindle throat: 280 mm spindle distance: 455 mm headstock adjustment: 250 via Hand - Kurbel mm feed:: 0,08 - 0,12 - 0,20 - 0,31 / 4 steps mm/U feed:: automatic + manuell spindle speed:: 180 - 2000 / 8 steps U/min distance between table/spindle: min. 3x 140mm und 1x 260mm mm distance between table/spindle: max. 3x 700mm und 1x 820mm mm table surface area: 1800 x 350 mm table adjustment: 300 via Hand mm Gedpfsu Idugex Akyjkc total power requirement: 6,3 kW weight of the machine ca.: 2,4 t dimension machine xH: 2,1 x 0,9 x 2,2 m Application: Drilling, countersinking; reaming and thread cutting. Each drill spindle has its own drive motor Equipment: Foot pedal/operation Hand crank *

Condition: used, Year of construction: 1979, Technical details: grinding diameter min/max: Aufnahme: Ø 200 x 32 mm number of spindle speeds: 3000 U/min total power requirement: ca. 1,2 kW weight of the machine ca.: 0,24 t dimension machine xH: 0,7 x 0,9 x 1,6 m The grinding spindle is equipped with two hand levers: Gedpfx Akeu Ng Ncjyjkc Working range left = hand grinding device for small shank drills, grinding wheel currently Ø 120 x 30mm; admission=Ø 32mm; speed 3000 rpm.; with grinding support Working range right = swiveling device for conical shank drill; cup grinding wheel currently Ø 160 x 30mm; admission=Ø 32mm; speed 3000 rpm. Cutting angle max 180° for double-edged and 120° for triple-edged Clearance angle 5° - 9°; drill-Ø 8 - 40mm, possible grinding modes e.g.: normal grinding, DK-grinding, center grinding, spiral grinding, step drill grinding Machine illumination available *

Condition: used, Year of construction: 1982, Technical details: dimensions of grinding wheel: Ø 150 x 20 mm grinding spindle speed: 3600 U/min height over floor: 900 mm current type: 220 V machine weight approx.: 27 kg dimensions L x W x H: 0,37 x 0,35 x 1,4 m Double sanding bench sitting on foot stand (foot Ø 353mm) Gedpfx Akou Ngxdsyjkc Left side with drill grinding device (angle 90° - 180°), longitudinal adjustment 25mm incl. accessories *

Condition: used, bore capacity in steel (diameter) 15 mm throat 215 mm turning speeds 200 - 3600 U/min 350 x 300 mm Gsdpfxezpzb Se Akyjkc total power requirement 1,0 kW / Volt tool taper MK 2 weight of the machine ca. 320 Kg dimensions 0,8 x 0,6 x 1,9 mm Bench drill - Base unit with drawers

Year of construction: 1982, condition: good (used), IESSE - multispindle boring machine model BEAVER year 1982 manufacture Biesse S.p.A Italy S/N 312/82 Technical data 1 horizontal drilling unit, 21 spindles 2 vertical drilling units, 2x10 spindles, pitch 32 mm Horizontal drilling motor 2.2 kW Vertical drilling motor 2 x 1.5 kW Spindle speed 2800 rpm Godpfx Aefriztekyokc Blade dimensions 10x1.5 mm Operating pressure 0> 6 MPa 7 pcs pneumatic responses with kSsi control levers weight 865 kg L x W X H 280cm × 150cm × 150cm

Condition: ready for operation (used), functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 350 mm, workpiece weight (max.): 150 kg, overall weight: 2,000 kg, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item within the specified timeframe, between November 16, 2026, and November 26, 2026! TECHNICAL DETAILS Maximum workpiece dimensions: 840 × 460 × 350 mm Maximum workpiece weight: 150 kg Work table dimensions: 600 × 300 mm Travel range X-axis: 350 mm Travel range Y-axis: 250 mm Travel range Z-axis: 350 mm Travel range W-axis: 350 mm Rotation speed C-axis: 300 rpm MACHINE DETAILS Gkedpfx Asz Il Eiokyjc Dimensions & Weight Dimensions (L x W x H): 1,600 x 1,200 x 2,200 mm Weight: 2,000 kg External Reference: Schönichen - Lot 12

Condition: good (used), Year of construction: 2005, functionality: fully functional, Control system: Siemens 840-D Spindle diameter: 130 mm Spindle speed: 3500 RPM Spindle mount: ISO 50 Torque: 1320 Nm Main motor power: 37 kW Travel in X-axis: 4000 mm Travel in Y-axis: 2500 mm Travel in Z-axis: 2000 mm Travel in W-axis: 800 mm Working feed rates: 15 m/min Godpfez Ii Tdox Akyskc Rapid traverse rates: 20 m/min Rotary table: 1800 x 1800 mm Table load capacity: 20,000 kg Tool magazine: 60 positions Machine weight: approx. 36 tons Universal milling head - manual

Condition: good (used), Blum hinge boring machine with a mobile carriage, guide rails, and several drill bits. Godpfxsz Hv E Dj Akyekc

Condition: used, control type: manual, degree of automation: manual, actuation type: hydraulic, number of rollers: 3, roller (top) diameter: 450 mm, side roll diameter: 410 mm, sheet thickness (max.): 40 mm, sheet thickness steel (max.): 40 mm, sheet thickness stainless steel (max.): 30 mm, sheet thickness aluminum (max.): 50 mm, sheet thickness brass (max.): 50 mm, sheet thickness copper (max.): 50 mm, overall weight: 23,000 kg, input voltage: 380 V, input frequency: 50 Hz, number of digital displays: 2, Equipment: cone bending device, documentation/manual, hardened rollers, Plate bending machine 3 ROLL HYDRAULIC MODEL 3000 X 40 MM - YEAR 1997 PLATE BENDING ROLL PLANETARY DESIGN PYRAMID DUAL PRE-PINCH Nameplate Bending capacity -Plate width : 3000 mm -Rolling plate thickness: 40 mm -Prebend thickness: 30 mm --- minimum rolling ID 550 mm depending on plate thickness and width Rolls dimensions: -Useful length 3100 mm -top roll D 450 mm -side rolls D 410 mm Accessories installed: Central upper support hydraulic control to hold the plate formed into large diameters Side arm hydraulic to support the large diameter being formed Conical bending attachment with hydraulic control of the angle setting for cone rolling, cone bending stopper hardened pad swing-down on the drop-end of the machine. Technical data Rolls hardening induction treatment, high strength surface of the 3 rolls Power driven total on the 3 rolls with axial gearbox and direct drive hydro-motor each roll Console electric on wheels with centralized commands joysticks and digital readout. Digital readouts of the rolls position bending and pre-bending. Re-rolling system for welded shells rounding. Opening front side hydraulic drop-end to unload the closed shell. Variable speed working roll bending rotation hydraulic speed fast/slow. Voltage supply 3 phase Vac, electric power 40 Hp. Gedpfsz H N Ifsx Akyekc

Condition: used, Technical details: bore capacity in steel (diameter): 32 mm throat: 320 mm bore stroke: 250 mm spindle taper MT: MK 4 spindle speed:: 63 - 710 / 8step U/min feed: 0,07; 0,13; 0,254; 0,42 mm/U Distance spindle/table max.: 600 mm table clamping surface:: Ø 450 mm table rotating: 360 ° clamping table - swivable: ja Grad drill table adjustment: 600 mm column diameter: 215 mm total power requirement: 2,2 kW weight of the machine ca.: 730 kg dimension machine xH: 1,0 x 0,58 x 1,4 m Equipment: Quick-action drill chuck RÖHM Supra 16mm Coolant tank with pump Socket for 220V Gedpewcygcefx Akyskc *

Condition: new, Year of construction: 2026, functionality: fully functional, travel distance X-axis: 230 mm, travel distance Y-axis: 150 mm, spindle speed (max.): 3,300 rpm, spindle speed (min.): 320 rpm, spindle mount: MK 2, throat depth: 182 mm, quill stroke: 80 mm, type of input current: three-phase, total length: 650 mm, total height: 900 mm, table width: 152 mm, input voltage: 400 V, total width: 580 mm, table length: 420 mm, drilling capacity: 16 mm, Equipment: documentation/manual, NEW MTP ZX7016 400V drill-milling machine "Zośka" + vice – 400 V – 12 months warranty on parts – delivery to any destination in Europe Godpfxsz H Aauo Akyskc The Metal Technics Polska ZX7016 is a compact 2-in-1 drill-milling machine for drilling and light milling in metal. Compact dimensions, simple operation and a solid construction make it ideal for workshops, garages, service departments and hobby metalworking. A true classic, known for its excellent value for money. TECHNICAL DATA • Spindle taper: MT2 • Max. drilling diameter: 16 mm • Max. face milling diameter: 40 mm • Max. end milling diameter: 10 mm • Spindle speeds: 320–3300 rpm (12 speeds) • Spindle stroke: 80 mm • Table size: 420 x 152 mm • Table travel: 230 x 150 mm • Spindle to column: 182 mm • Spindle to table: 360 mm • Dimensions with base: 650 x 580 x 900 mm • Weight: 75 kg • Motor: 550 W • Voltage: 400 V / 50 Hz, three-phase STANDARD EQUIPMENT • Cross table with handwheels • Machine vice • Drill chuck with chuck guard • 12-speed belt drive WARRANTY & DELIVERY • 12 months warranty on parts • Delivery to any destination in Europe – shipping cost calculated upon request • Price: EUR 395 net (excl. VAT) We ship to any address in Europe – the machine is carefully packed and delivered straight to your workshop. Get in touch and we will prepare a tailored delivery quote for your location.

Condition: used, For export only! Gkedpfx Ajz N Slgekyoc G&J C85 Cleaning Unit

Condition: used, Year of construction: 2018, 1 x CNC-CONTROLLED DRILLING, GLUING AND DOWEL INSERTING MACHINE GANNOMAT "INDEX 130 PRO" (with options as Index 180 Pro) 400V, 3Ph, 50Hz complete in standard design with: - Support with linear guide consisting of: 1 x single-spindle horizontal drilling unit, 1.1 kW motor, tool speed selectable via operator software (3000/5000/8000 rpm) 1 x blow-out, gluing and dowel inserting station in reinforced design for dowels Æ 8 mm, dowel length 30 mm - fully automatic, electronically controlled central lubrication - X-axis NC controlled, with working length 1300 mm, travel speed max. 78 m/min. - Z-axis, position via support table 5-40 mm programmable with NC-controlled Z-axis option - Dowel driving overhang of 7-20 mm, programmable with NC-controlled Y-axis option, drilling depth of 0-35 mm (with drill length GL 70 mm) is automatically set with driving overhang - Closed glue system with 6 bar glue pressure via glue nozzle, for glues with a viscosity of 150 to 350 mPas - Glue quantity continuously adjustable via operator software - GL/WATER selector switch for rinsing the glue system, 1 stainless steel container each for 5 kg glue and 5 l water - Control lamp for residual glue quantity display in the glue container - 1 side stop left, 1 side stop right and 1 center stop (all removable) - 4 start buttons for individual working with 1-4 workpieces - 4 pcs. Pneumatic inclined clamping cylinder 10° for workpiece thicknesses up to max. 80 mm, workpiece length (Y) min. 70 mm - 1 pc. suction funnel, connection Æ 80 mm - 1 pc. TCT control with: built-in industrial PC, incl. Soft PLC type Beckhoff TWINCAT, operating temperature range 0-50°C, TFT industrial display 15" resistive touchscreen, resolution 1024 x 768, CPU 2 GHz, 256 MB RAM, 2x network interface adapters, IDE hard disk, 4x USB rear, 1x USB front, operating system: WINDOWS 7 - programming via menu-driven user software, drilling distances freely programmable with ABSOLUTE, RELATIVE or GRID dimensioning, automatic workpiece mirroring and work step optimization, 4 work fields can be assigned with different programs, graphic workpiece display, parametric programming, 0-point shift, programmable work lists, error diagnosis with plain text OPTIONS: 1 electronic, optical glue monitoring system G.I.C. (Glue Insert Control) for 1 glue nozzle 4 vertical inclined clamping cylinders 10° with holder, additionally, (total 8 clamping cylinders) 1 surcharge for machine bed length 1800 mm with working length 1800 mm 1 surcharge for: 1 horizontal drilling unit, motor 1.5 kW, with multi-spindle drilling head with 3 individually controllable drilling spindles, pitch 32 mm arranged in X-axis, tool speed 3000 rpm. (The standard working length is not reduced) 1 Y-axis NC-controlled, with recirculating ball screw and dynamic traversing speed of 300 mm/sec. The dowel driving overhang 7-30 mm and the drill hole depth 0-42 mm can be programmed via software. (with drill length GL 77 mm) for vertical drilling unit drilling from TOP, Y-axis position 5-42 mm 1 surcharge Y-axis NC-controlled position 5-62 mm instead of 5-42 mm 1 surcharge for: 1 vertical drilling unit drilling from TOP, motor 1.5 kW, with multi-spindle drilling head with 3 individually accessible drilling spindles, 32 mm pitch arranged in X-axis, tool speed 3000 rpm. Y-axis position 5-42 mm, workpiece length (Y) min. 130 mm, (the standard working length is not reduced) 1 Z-axis NC-controlled, with K Gedpfx Aexwaz Hjkyskc

Condition: good (used), Year of construction: 2008, functionality: fully functional, Peddinghaus FDB 1000/3 – CNC Plate Drilling & Profiling System– Year 2008 6 metres x 1 metres Capacity. Maximum workpiece width 1000 mm. Gsdez Hfbbspfx Akyjkc Maximum workpiece thickness 50 mm. 3 x drilling spindles. Maximum drilling diameter 40 mm. Oxy‐Fuel. Hypertherm Plasma. Kemper Extraction Unit.