Used Okk Hp 500 S for sale (78,908)

Condition: used, mileage: 352,000 km, power: 375 kW (509.86 HP), first registration: 09/2019, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, total length: 10,550 mm, total width: 2,550 mm, total height: 3,680 mm, loading space volume: 43 m³, loading space length: 8,180 mm, loading space width: 2,460 mm, loading space height: 2,150 mm, Year of construction: 2019, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, soot filter, tail-lift, * Swing-wall body, GSL under-roof system * Body certified by DEKRA according to VDI 2700 and DIN EN 12642 Code XL * Cargo area dimensions: 8,180 x 2,460 x 2,150 mm * 2,000 kg Bär tail lift Laodpfx Ajzr Sxyelbsh * Pallet truck box * Fully air-suspended * Lift axle * Differential lock * 50 mm under-run protection with trailer coupling * Spacious cab with high roof * Navigation system * Sun visor * Heated seats * Air conditioning * 1 bed * Adaptive cruise control * Lane keeping assist * Automatic transmission * VEB+ brake

Condition: used, fuel type: diesel, power: 20 kW (27.19 HP), gearing type: mechanical, empty load weight: 1,280 kg, color: red, first registration: 10/2018, Unladen weight: 1280 kg, location: 90518 Altdorf. Mast: DGRKTL, primed and powder-coated. Engine: 19.9 kW / 27.1 hp. Drive: 1-wheel drive. Load capacity: 1,500 kg at 600 mm load center. Lifting height: 2,200 mm. Standard front tire: 140/55. Standard rear tire: 23x8.5-12. 1361 operating hours (approximate). Subject to errors and changes. Lasdpfx Ajzt Ux Eslbsh

Condition: used, Year of construction: 2000, Gathering machine / booklet making Theisen & Bonitz TB Sprint 314 flex HP with QSM 303 14 stations, manual feeder TB Sprint flex 314 HP Format (max.): 350 × 500 mm Stack height: up to 650 mm Performance: - Up to 3,300 cycles/hour in 1:1 operation - Up to 4,200 cycles/hour in 1:2 operation TB B303 QSM Stitch-fold-cutting unit Formats open max.: 35 x 50 cm Open formats min.: 6.5 x 15.5 cm Smallest brochure: 6.5 cm spine length x 4 cm Laodpjzictpofx Albjh with head-foot trimming: 10.5 cm spine length x 4 cm largest brochure: 35 cm spine length x 25 cm with head-foot trimming: 34.6 cm spine length x 4 cm Output: up to 3100 work cycles/h, depending on format and paper Front cutting device with upper/lower blade for cutting to 4 cm and sections larger than 1.5 cm, infinitely variable motorized format adjustment of the front cut with additional handwheel for fine adjustment, head and foot trimming of 3 - 20 mm each for approx. 120 pages of standard 80 g/m² paper

Year of construction: 1995, condition: excellent (used), functionality: fully functional, number of drawers: 5, number of slots in tool magazine: 5, Special grinding wheel cabinet. Laodszin T Uopfx Albjh

Condition: as good as new (ex-display), Year of construction: 2016, For sale: machine for packaging paneling. Laodpozkwi Uefx Albeh

Condition: used, functionality: fully functional, The separation is achieved through repeated fractionation on up to 5 longitudinally arranged, superimposed sieve decks, the inclination of which increases downwards. The sieve frame is driven by unbalanced motors. Ljdpfxszl Sv Se Albsah The installed sieve decks have the following sizes: 15-10-5-3-1 mm. The machine was in operation at an R&D center in Israel. As the company now operates a production facility in Europe, the R&D center will be closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production plant in Europe. The details for optimal transport need to be clarified. The machine price does not include packaging on a pallet.

Condition: new, power: 375 kW (509.86 HP), first registration: 11/2025, fuel type: diesel, tire size: 385/55-22,5, axle configuration: 6x2, wheelbase: 5,600 mm, fuel: diesel, fuel tank capacity: 610 l, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, loading space length: 65,000 mm, loading space width: 24,800 mm, Year of construction: 2025, Equipment: ABS, AdBlue, Bluetooth, EBS, air conditioning, central locking, crane, cruise control, differential lock, electric window regulation, electronic stability program (ESP), fog lights, navigation system, onboard computer, parking heater, power mirror, retarder, seat heater, soot filter, trailer coupling, - Aluminum fuel tank - Rear work light - Heated exterior mirrors - Heated mirrors - Co-driver seat - Differential lock - High beam - Low noise - Speed limiter - Cab - Catalytic converter - Automatic climate control - Refrigerator - LED lighting - Air suspension - Air-suspended seats - Particle filter - PTO - Radio/Multimedia system - Disc brakes - Sunroof - Sleeper cab - Seat heating - Sun visor - Lane keeping assist - Stability control - Auxiliary heater - Auxiliary heating system - Toolbox - Windshield - Additional steered axle Internal number for customer inquiries: 6-120 VOLVO FH 500 LL 6x2 CONTAINER PLATFORM WITH FASSI 545RA.2.28 XE-DYNAMIC LOADING CRANE Loading crane: FASSI F545RA.2.28 xe-dynamic At 20.8 m, this crane can still lift 1650 kg (can be extended with 2 manual outriggers up to 24.9 m and 700 kg) Endless slewing range Double knuckle system with PROLINK (over-extending knuckle arm up to 15 degrees) FASSI stability control Radio remote control with linear levers and display of the extension length XF system (Extra Flink) XP system (Extra Power) FL system (Full Lift) Outriggers can be operated remotely LED work lights Preparation for winch (winch of the Fassi V30 model can be fully retrofitted at any time) and more Vehicle description: Volvo FH 500, new model Container platform body in low-profile design 2 pairs of extendable container locking devices, up to 3 m, for accommodating 20-foot containers 4 warning boards with lighting, extendable up to 3 m Platform dimensions 6,500 mm x 2,480 mm Side walls + rear wall 600 mm high Laodpfjzk H Exjx Albjh Front wall 1,900 mm high Lashing eyes at intervals of approx. 250 mm Forklift protection Globetrotter safety cab, FH Diesel engine 13 l, 510 hp / 375 kW, 2550 Nm Exhaust emissions acc. to Euro 6E, with SCR, particle filter and exhaust gas recirculation I-Shift, automated 12-speed gearbox I-Shift driving mode: Standard, Performance and Economy Volvo Engine Brake (VEB+) Wheelbase 5,600 mm Drive 6x2 Differential lock Suspension air/air Front axle tires 385/55R22.5, driving axle tires 315/70R22.5, lift axle tires 385/55R22.5 Trailer coupling Rockinger 400 G 150 LED main headlights Rain sensor (sensor-controlled windshield wipers) Daytime running lights LED, "V-light" LED tail lights, brake lights with emergency braking flashing sequence Auxiliary air conditioning Auxiliary heater Driver's seat comfort, air-suspended, heated, seatbelt in seat Leather steering wheel Media/infotainment system with navigation Cool box with freezer compartment 33 L under bunk Roof hatch, electrically operated, tinted glass Close-range camera on the passenger side for blind spot monitoring Distance control cruise control (ACC) with collision warning and emergency braking function Lane keeping assist and more Financing / hire purchase, as well as leasing / partial depreciation leasing is possible with our leasing partner. For further questions, our sales team will be happy to assist you. This is a non-binding offer.

Condition: excellent (used), SLM Solutions SLM 500 HL Professional system for the additive manufacturing of metal components using selective laser melting. Suitable for industrial applications, prototype construction, toolmaking, aerospace, medical technology, and series production. Technical data Manufacturer: SLM Solutions Type: SLM 500 HL Year of manufacture: 2015 Build volume: 500 x 280 x 365 mm Laser configuration: Quad-fiber laser 4 x 400 W Max. build rate: up to 105 cm³/h Layer thickness: 20 µm to 75 µm Min. feature size: 150 µm Beam focus diameter: 80 - 115 µm Max. scanning speed: 10 m/s Supply voltage: 400 V / 50 Hz, 3/N/PE Control voltage: 24 V DC Rated current: 36 A Heating power: 2.4 kW Protection class: IP50 Compressed air requirement: 50 l/min at 6 bar Special features Patented multi-beam technology Automatic powder management PSX sieving station PRS unpacking station Laser class 1 CE marking available Service / Operating history The system was used exclusively for processing aluminum from the beginning and operated under a nitrogen atmosphere. It operated reliably until decommissioning. During the last maintenance, the oxygen sensors, including the evaluation unit, were updated to the latest version. The system was then professionally decommissioned. Cooling unit Manufacturer: Riedel Type: WKS 101.2M5LE.I Year of manufacture: 2016 Refrigerant: R134a Filling quantity: 3.0 kg Operating pressure HD: 18.7 bar Protection class: IP54 Scope of delivery according to delivery note SLM 500 HL laser melting system, approx. 2680 kg Riedel cooling unit WKS101.2M5LE.I, approx. 200 kg SLM filter system, approx. 150 kg SLM unpacking station PRS 500, approx. 855 kg SLM sieving system PSX 500, approx. 690 kg Logitrans lifter LFSM 1002/1620, year of manufacture 2015, approx. 550 kg 2 x SLM build cylinders, each approx. 205 kg SLM spare parts / piping Dimensions / Weight Complete system according to manufacturer's specifications: approx. 5200 x 2800 x 2700 mm Weight according to manufacturer's specifications: approx. 3100 kg in operating condition approx. 2400 kg without powder Condition Used system from industrial application. The system has been dismantled and stored. Optical condition as shown in the pictures. Scope of delivery as shown in the pictures. Inspection and testing on-site are possible by arrangement and are highly recommended. Important note: All information is provided to the best of our knowledge based on available documents, software displays, manufacturer data, delivery note and nameplates. Lodpfoza Ethex Albsah Deviations in technical data are possible. Shipping or freight forwarding is possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: good (used), Year of construction: 1991, functionality: fully functional, CNC sinker EDM machine MAHO HANSEN, Type: HS 500 E, Year of manufacture: 1991, with electrode changer (without electrode holders) and accessories. Control system: EROCOM 20 (Heidenhain). Lasdpszcmanefx Albeh Technical data: see data sheets. From a toolmaking department; all documentation available, in good condition.

Condition: excellent (used), mileage: 1,450,349 km, power: 368 kW (500.34 HP), first registration: 12/2006, fuel type: diesel, axle configuration: 6x2, wheelbase: 6,460 mm, fuel: diesel, brakes: retarder, color: other, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro5, number of seats: 2, total length: 9,270 mm, total width: 2,550 mm, Year of construction: 2006, Equipment: retarder, = Additional options and accessories = - Intarder = More information = General information Cab: single Registration number: BS-NS-27 Technical information Number of cylinders: 8 Engine capacity: 15.607 cc Axle configuration Front axle: Steering Rear axle 1: Double wheels Rear axle 2: Double wheels; Lift axle Weights Empty weight: 13.365 kg Carrying capacity: 14.920 kg GVW: 28.000 kg Max. towing weight: 50.000 kg Condition Technical condition: very good Visual appearance: very good = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. Lodpsywynvefx Albsah When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: used, mileage: 183,000 km, power: 300 kW (407.89 HP), first registration: 01/2014, fuel type: gasoline, color: black, gearing type: automatic, emission class: euro5, number of seats: 4, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), immobilizer system, navigation system, parking heater, German vehicle special equipment: Audio navigation system: Autopilot system APS COMAND with hard drive navigation including integrated DVD changer, hands-free telephony (Bluetooth telephone module), glasses compartment integrated in headliner, DAB tuner (digital radio reception), driver assistance system: active park assist, driver assistance system: adaptive high beam assist, rear seat safety package, automatic child seat recognition in passenger seat, alloy wheels front/rear: 8.5x19 / 9.5x19 (AMG, 5-spoke), media interface (universal interface for iPod / AUX / USB / MP3), memory package, metallic paint, multicontour seat package, spare wheel as emergency wheel, reversing camera, heated windscreen washer system, electric glass sunroof, integrated garage door opener transmitter, seat upholstery: Passion leather, front seats: climate-controlled, Harman-Kardon sound system with Logic7 surround system, AMG/AMG-Line sports package, mobile phone/comfort telephony/LTE preparation, auxiliary heater (parking heater) with remote control. Further equipment: Ledeywp Skepfx Albjah Adaptive brake lights, driver/passenger airbag, AMG optic/styling package 1, traction control system (ASR), exterior mirrors electrically adjustable and heated (both sides), exterior mirrors with surround lighting, outside temperature display, front pelvis airbags, turn indicators integrated in exterior mirrors, brake assist, standard design and equipment line, sport design stainless steel pedals, stainless steel door entry sills, driver assistance system: Attention Assist (drowsiness detection), driver assistance system: hill-start assist, electric windows front and rear, glove compartment with cooling function, LED tail lights, interior trim: poplar wood, headliner: cloth, auto-dimming rear-view mirror, Isofix child seat mounts on rear seat, 4-door body, driver's knee airbag, comfort automatic climate control (Thermotronic), head airbag system (windowbag), NECK-PRO front headrests, enlarged fuel tank, luggage compartment floor with storage compartment, multifunction steering wheel, engine 4.7 Ltr. - 300 kW V8 CGI CAT, PRE-SAFE system, tire pressure monitoring, onboard computer, low emissions according to Euro 5 standard, front side airbags, front passenger airbag occupancy detection, front seats electrically adjustable, front seat heating, start/stop system, body-coloured exterior door handles, heat-insulating glazing, auto-dimming rear-view mirror, rain sensor, front seat heating.

Condition: new, neu ca. 2 Wochen ab Auftragse Italien 17940 € 344.45 € 350 mm 300 mm 500x160 mm 350x150 mm 300x150x55 mm 2800 1/min 3,6 kW 1020 mm 820 mm 2170 mm 440 kg Dm. 200x78x78 mm This Grinding machine with fixed table derives from the model R.V. 500 but it differs from it as it is equippedwith a long column supported by four bearings and is opportunely stiffened by a sturdy column support. This Surface grinding machine, due to its stiffness and geometrical stability, is highly suitable for grinding with precision pieces of notable height: single or mass-produced die-shop components, moulds, punches, gears and others. Moreover, the nuts of the vertical translation screw and the dowels to realign the wheel motor to the axis,equipping this model of Grinding machine with fixed table, allow preserving perfect work conditions over the years, too. CAST IRON BED to maintain the geometric stability of the grinding machine in time, too. CAST IRON COLUMN, protected by bellows and supported by four adjustable precision bearings, broadly sized for this type of grinding machine with fixed table. Three-phase MOTOR air-cooled by double jacket, to prevent the overheating of the grinding machine motorduring continuous machining and to keep the temperature of the motor shaft and of bearings constant. Hardened, ground and dynamically balanced SHAFT, supported by precision ball bearings, widely sized for this type of grinding machine with fixed table and self-adjusting by means of springs for the backlash preload, to absorb thermal expansions. VERTICAL TRANSLATION SCREW supported by opposite and adjustable ball bearings, with apt motion for maintaining, in this model of grinding machine with fixed table, the wheel work field free from hindrances and for avoiding dust depositions. Metal BELLOWS for a better protection of the vertical translation screw of the grinding machine. Laedsywcl Repfx Albeh Opposite bronze NUTS, for the recovery of the eventual wear in time of the vertical translation screw of the grinding machine with fixed table. REGISTRATION DOWELS to re-align the wheel motor of the grinding machine to the axis, obtaining parallel surfaces also in time. HANDWHEEL of the grinding machine, supported by three bearings and engaged on the screw by means of a pair of helical gears, equipped with graduated drum, supported by a trust bearing, for a stock removal of mm 0.01 - 0.02 - 0.03 for each single pass; the rapid feed per handwheel turn is mm 2. KNOB WITH JACK, for the programmable micrometric feed of mm 0.01 - 0.02 - 0.03 - 0.04 per pulse, which allows a simple use by avoiding the constant increment control. SLOT to permit the maximum use in height of the work field of the grinding machine wheel and to clamp non-magnetic parts and accessories such as: magnetic chuck, self-centering chuck and squares. Low-voltage CONTROLS, protection, indicator light and all requisites to comply with safety and conformity regulations provided for this type of grinding machine with fixed table. HANDLES, SHAPES AND SIZES of the grinding machine with fixed table designed to meet the current ergonomic recommendations for work. WITH FOLLOWING ACCESSORIES: Magnetic chuck 300 x 150 mm Wheel flange and cup wheel Semiautomatic dresser with diamond Coolant system Operating manual in German or Italian

Condition: good (used), mileage: 139,000 km, power: 375 kW (509.86 HP), first registration: 04/2017, axle configuration: 6x2, gearing type: automatic, Year of construction: 2007, Equipment: ABS, EBS, central locking, cruise control, electric window regulation, electronic stability program (ESP), trailer coupling, = Additional options and accessories = - Cabin - PTO = More information = Front axle: Steering Rear axle 1: Lift axle; Steering Empty weight: 11.795 kg Carrying capacity: 16.206 kg GVW: 28.000 kg Ljdpey Nbdisfx Albjah CE mark: yes Technical condition: good Visual appearance: good

Condition: used, Year of construction: 2017, For processing aluminum and PVC profiles: * Miter cuts possible in 3 planes, also usable as a crosscut saw. * Manual adjustment of the horizontal saw blade, allowing it to be positioned up to 20 mm in front of the vertical blade. * Notching options: right-angled, single-sided bevel, double-sided bevel, triple-sided bevel. * Processing of profiles up to 300 mm wide at 90°, sharp miter cuts up to 30°, profile height 280 mm. * Notching depth: horizontal up to 185 mm, vertical up to 210 mm at 90°. * Notching width at 90°: 300 mm. * Max. profile height 280 mm. * Swivel range of the saw blade vertically from 30° - 90° - 30° (front/center/rear) manually, positioning via a mechanical digital display. * Swivel range of the saw blade horizontally with the vertical saw blade 30° - 90° - 30°, manually, positioning via a mechanical digital display. * Material stop (tabletop) can be swivelled manually to the left and right from 30° - 90° - 30°, positioning via a scale. * Material depth stop is manually adjustable with a sliding carriage and hand clamp, positioning via a mechanical digital display. Laedszrk Rbspfx Alboh

Condition: used, mileage: 512,595 km, power: 368 kW (500.34 HP), first registration: 05/2019, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, color: grey, gearing type: automatic, emission class: euro6, Year of construction: 2019, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, Scania G 500 A4x2NA CG20 H VIN: 9256111 Chassis / Components: * Wheelbase: 3,750 mm * Leaf / Air suspension (2 bellows) * Tires: Front: 385/65 R.22.5, Rear: 315/80 R.22.5 * Remaining tread depth: Front: approx. 80% // Rear: approx. 50% Lsdeyx N I Uspfx Albsah * 1 x Aluminum tank 400 L * 1 x AD-Blue tank * 1 x Hydraulic tank Cab: * CG 20 H * 1 x Bunk * Refrigerator * Automatic climate control * Auxiliary heater * Auxiliary air conditioning * Scania Infotainment Radio * Aux, USB, BT * Skylights / LED * 2 x Rotating beacons * 2 x Work lights * Scania-AEB = Emergency Braking Assist * Scania ACC = Adaptive Cruise Control * LDW = Lane Departure Warning Engine / Transmission: * 12,742 cc // 500 hp / 368 kW // EURO 6c * Scania retarder * Opticruise / Automatic transmission with 2 pedals * Differential lock * Dual PTO Weights: * Gross vehicle weight: 18,000 kg * Unladen weight: 7,641 kg * Payload: 10,359 kg Other: * German vehicle * 1 previous owner * New MOT inspection available upon request ---- New main inspections / safety checks or weight reductions/increases are possible upon request. We will gladly assist you in obtaining export/transfer license plates. We can also arrange for the transport of your purchased vehicles within Germany. Contact us! ---- We speak the following languages: German, English, and Russian! ---- No liability for printing & typographical errors, changes, prior sale, and errors reserved! ---- Who are we? Leible Nutzfahrzeuge is a family-owned company based in Kehl am Rhein. With our many years of experience in the preparation and distribution of commercial vehicles, we are a reliable partner for customers worldwide. The particular strength of Leible Nutzfahrzeuge lies in the distribution of new and used commercial vehicles. On 11,000 m², you will find a variety of vehicles. Our corporate philosophy is characterized by fairness and integrity. As customer satisfaction is very important to us, we offer our customers an excellent all-round service package and provide them with a competent contact person who will assist them in the purchase or sale of vehicles. See for yourself! Our service for you: Loading of vehicles We will gladly help you with loading your purchased vehicles. Organization of special transports We will gladly help you in organizing special transports. Day permits / Export license plates We will gladly help you in obtaining export license plates/short-term license plates. Handling of customs formalities We will gladly help you in handling customs matters.

Condition: like new (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 2026, overall weight: 49 kg, total length: 600 mm, total width: 500 mm, total height: 850 mm, Work table AT 500, drawer cabinet TOP work table, catering bakery table Stainless steel design with 3 drawers Drawers with integrated handle strip Lsdpfjyhy H Asx Alboah Dimensions approx.: 500 x 600 x 850 mm, W x D x H Used, like new Option: Delivery service Castors/wheels, new Visit our large showroom!

Condition: used, Year of construction: 1988, functionality: fully functional, Press capacity 5,000 kN Table area 2,400 mm x 1,700 mm Ram area 2,400 mm x 1,400 mm Laedpfx Aoyg Emzjlbeh Adjustable stroke 25 mm - 200 mm Ram adjustment max. 200 mm Stroke rate 20 - 100 spm Drive power 84 kW Machine weight approx. 62,500 kg with roller feeder/straightener combination + decoiler Further data and photos available on request

Condition: new, Year of construction: 2025, For crushing marble, sandstone, and quartzite, various types of crushers can be used depending on the properties of the raw materials and the desired final product specifications. Here are some common types of crushers that may be suitable for processing these materials: 1. Jaw Crusher: - Jaw crushers are commonly used for primary crushing. They are robust machines that handle tough materials, making them suitable for breaking down hard and abrasive stones like marble and quartzite. 2. Impact Crusher: - Impact crushers are versatile and suitable for both primary and secondary crushing. They work by impacting the material with hammers or blow bars, producing a high reduction ratio. Impact crushers can be effective for shaping the final product. Lasdpfx Ajq Nx Nnjlboh 3. Cone Crusher: - Cone crushers are often used for secondary or tertiary crushing. They are suitable for processing harder stones and can produce well-shaped and fine-grained aggregates. 4. Gyratory Crusher: - Gyratory crushers are used for large-scale primary crushing. They have a conical-shaped head and are well-suited for handling abrasive materials. However, they are less commonly used than jaw or cone crushers. 5. Vertical Shaft Impact (VSI) Crusher: - VSI crushers are suitable for shaping and producing artificial sand. They operate by throwing the material against a set of anvils or impellers to break it down into finer particles. 6. Hammer Crusher: - Hammer crushers are used for crushing softer materials like sandstone. They operate by applying force to the material, causing it to break along natural fault lines. 7. Roll Crusher: - Roll crushers are used for reducing the size of friable materials. They consist of two counter-rotating rolls that compress the material between them. 8. Crawler Mobile Crusher: - Mobile crushers offer flexibility and mobility, allowing them to be used directly at the quarry or job site. Crawler mobile crushers can handle various types of stones, including marble, sandstone, and quartzite. 9. Screening Equipment: - After the initial crushing stage, screening equipment such as vibrating screens may be used to separate different sizes of crushed material. 10. Dust Suppression Systems: - Crushing operations can generate dust, and dust suppression systems are used to minimize environmental and health impacts. When selecting a crusher for marble, sandstone, or quartzite, consider factors such as the hardness of the material, the desired final product specifications, and the production capacity required. Additionally, it's important to integrate the crushing process into an overall plant design that may include screening, conveying, and washing equipment depending on the specific needs of the application.

Condition: ready for operation (used), Fanuc A06B-6078-H202#500 spindle amplifier module, serial number as per photo, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery as shown in the photos. Lodsx Eq Ucopfx Albsah

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Basic pallet racking system consisting of: 2 frames, 5,000 mm, with feet, Storage width 2,700 mm, 4 storage levels with 6 crossbeams, 2,700 mm, Expansion possible: 1 x frame, 5,000 mm, with feet, €150.00, 1 x crossbeam, 2,700 mm, €25.00, 1 x crossbeam, 1,800 mm, €20.00 1 x crossbeam, 3,600 mm, €30.00 1 x fall-through protection, 2,700 mm, €25.00 1 x fall-through protection, 3,600 mm, €30.00 1 x grid decking, 900 mm, for one pallet, €35.00 Lasdpfow S T U Rjx Albsh Ex works, from location Seevetal, subject to prior sale No shipping! Only pickup possible.

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 6360.16.65, Country of manufacture: Switzerland Voltage: 380/400/50/3 Net weight: 1350 kg Customs tariff number: 8460.1920 Dimensions: 200/120/160 cm TECHNICAL SPECIFICATIONS Maximum saddle travel: 530 x 220 mm Maximum grinding surface: 520 x 230 mm Table clamping surface: 600 x 200 mm Table speeds Longitudinal, standard operation: 0-25 m/min With slow feed: 5/10 mm - 8 m/min Cross feed: 0-6 m/min Vertical travel by hand: 330 mm Ledpfjw Ucxqjx Albjah Rapid travel by motor: 290 mm Rapid feed rate: 460 mm/min Max. distance between table and spindle axis: 412 mm Vertical feed movement Handwheel, 1 division: 0.01 mm Micrometric device, 1 division: 0.001 mm Automatic: 0.001-0.099 mm With pulse button: 0.001 mm Cross feed movement Handwheel, 1 division: 0.01 mm Micrometric device: 0.001 mm Grinding wheel Diameter x width x bore: 225x25x50/51 mm Standard RPM: 2700 rpm With variable speed drive: 3700-1300 rpm All technical data are provided without guarantee and are subject to possible errors or omissions.

Condition: used, door closer, floor door closer, closing body -Manufacturer: Geze, floor door closer closing body type TS 500 NV .: 0672-CPR-0121 -Dimensions: 270/70/H65 mm Laodouxg N Ispfx Albsh -Weight: 2.8 kg

Condition: ready for operation (used), Step-Tec HVCS230-S-20-1.2/15-3FD-HSK-A63 high-speed spindle Id. 6014.058.A.10e removed from Norte VS500 Speed, the thread on one of the connectors is damaged, see photo, used, normal signs of wear, 100% functional, scope of delivery as per photos, ATTENTION: Please enquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Laodpoul Ipnsfx Albeh

Condition: excellent (used), Year of construction: 2002, We now have two Kardex Shuttle XP 500 units from 2002 in good condition available. These Vertical Lift Modules (VLMs) are a great solution for saving space and improving storage efficiency. Each tray is 2650 mm wide and 864 mm deep, and can hold up to 485 kg. The system helps speed up picking times and boosts productivity by using automated handling and flexible tray setups. This is a reliable model, and we can provide both original servicing and spare parts in the future. Machine specifications: Manufacturer: Kardex Remstar Manufacturing year: 2002 Model: SHUTTLE-XP-500-2650x864 Height: 7,000 mm Width vertical lift module / tray: 2,980 mm / 2,650 mm Laodpfx Aowl Inmjlbjh Depth vertical lift module / tray: 3,074 mm / 864 mm Number of trays: Approx. 21 trays per lift Maximum weight per tray: 485 kg Electronics: 3/N/PE 400V, 3x17A

Condition: used, Buchrückenrundemaschine - Book Back Rounding Machine La Fornigrafica Dorsi 500 Year 2005 Working width max. 500mm Thickness of books 0 - 100mm Output 400 - 600 Blocks/hour Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test Ljdpfx Aswhgcuelbsah