Used Mortise And Foiling for sale (6,722)

Year of construction: 1968, condition: good (used), for aluminium strip width: max. 1.050 mm Nsdpfx Asgryk Nef Sslg strip thickness: 10 - 20 mic

Year of construction: 1968, condition: good (used), for aluminium strip width: max. 1.050 mm Nedpfxe A Dims Af Sslg strip thickness: 10 - 20 mic

Condition: new, Year of construction: 2026, Equipment: safety light barrier, 1A Gmatick Storage Paternoster (roll rack) The foil storage Paternoster foils is suitable to use for the storage of all 3D-films, it is used as a high storage at the membrane press or as a space-saving storage solution for the 3D foils. With our Paternoster you can storage on very small area approximately 2, 4m x 1, 2m a lot of film rolls (up to 32 rolls of a Ø 300 mm). The required film is thus immediately available at the push of button. Our Paternoster are available from 2.8 m up to 6, 0 m as standard Paternoster. Also special solutions are offered by us, please contact us, we will then find the right solution for your storage. Njdsff Huwopfx Af Sslg As additional equipment we offer center sleeves, a manual cutting station or the full automatic cutting device and we have also ionization solutions available at Gmatick. • Storage rods ø 42.4 mm • Sleeves inside Ø max. 82 mm,. • Load chain as a hollow pin chain with a breaking load of 100 kN, • Chain pitch is 50 mm hole to hole and this is the raster for the positioning of the mounting foil bars. • Control with a key switch (dead man) for on / off • Rotational speed of the chain is approx. 5.5 m / min • Voltage 400 V, 3N; 50/60 Hz or as USA Version 480V 60Hz • Mains cable with CEKON plug 16A fuse protection (by the customer) 10A slow blow • ground load data at least 2, 2 kg / cm² • Side covering over the entire height of the Paternoster, guards from 2, 2 m above floor to top edge of the Paternoster. • Requirement for the installation of the Paternoster is a viable, flat and solid floor, • Floating floors you can’t install a Paternoster. It is forbidden

Condition: good (used), Polar Mohr RA-2 Jogger with roller and scale The machine is in perfect condition, ready to work. Technical data: Max format: B2+ Stack height: 150mm Weight: 450kg (jogger) + 150kg (weighing device) Power supply: 400V Air squeezing roller Air table Possibility of shaking to the right/left Adjustable angle of inclination Nlsdpfx Afsztn Erj Seg Adjustable shaking frequency (on the inverter) Adjustable force and speed of the air squeezing roller. Chrome table surface The machine is additionally equipped with a Bizerba sheet weighing system that allows for counting sheets on the machine, taring, packaging, etc.

Condition: ready for operation (used), Year of construction: 2022, number of ink cartridges: 4, We have Xerox Versant 280 and 180 printers available and ready for shipment. Xerox Versant 280 Integrated Fiery controller Counter: 800,000 OHCF cassette (2,000 sheets) Finisher with booklet maker We also have a Xerox Versant 180 available. Xerox Versant 180 Versant 180 2,000-sheet feeder External Fiery controller Finisher with booklet maker Counter: 1.1 million For more information, please ask. Nsdpfx Aetiyqusf Solg

Condition: excellent (used), Year of construction: 2022, Aeoon Full DTG Printing Solution for Sale Included Equipment: - Aeoon Kyo Printer (8 printheads) - Aeoon Compact Printer (8 printheads) - Aeoon PTB Pretreatment Line - 6 m conveyor dryer (two lines) - 3 m conveyor dryer (one line) - RIP software - T-Mini automatic folding device Aeoon Compact: - 8 printheads - Color configuration: CMYK + White - Uses water-based ink - Integrated humidification system - Two printing axes - Automatic cleaning system - Maximum printing resolution: 2400 dpi - Maximum print area: 1200 x 800 mm Nledpfxjxd U H Re Af Seg Aeoon Kyo: - 8 printheads - Color configuration: CMYK + White - Uses water-based ink - Integrated projection system - Integrated humidification system - Three printing axes - Automatic cleaning system - Maximum printing resolution: 2400 dpi - Maximum print area: 2000 x 980 mm Aeoon PTB Pretreatment Line: - Printing area: 1000 x 3000 mm - 13 nozzles - Speed: 10 m/min - Automatic cleaning system Conveyor Dryers: - Two belt system - Belt width: 700 mm - Belt length: 6000 mm - Feeder length: 1200 mm - Stacker length: 1200 mm - Dryer height: 100 mm - Temperature up to 200°C T-Mini Folding Device: - Fully automatic T-shirt folding - Memory for up to 6 programs - Integrated packaging module

Condition: used, ? Polygonmach PVB150 Mobile Concrete Plant | Cold asphalt plant, RCC mixing plant, soil compound mixing plant. Emulsion mixing plant ? Polygonmach PVB150 is a next-generation mobile concrete plant designed to meet the demands of modern construction projects for speed, flexibility, and cost-efficiency. It offers dual-mode production – both Volumetric and Batch type operation – on a single platform, delivering perfect compatibility for all project types. ✅ Dual-Mode Flexibility: Nljdpsyf Dbnofx Af Seg • Volumetric Mode: On-demand, instant production up to 200 m³/hour directly at the site • Batch Type Mode: Precision recipe-based production up to 100 m³/hour ✅ Key Features: • Fully Automatic or Manual Operation: User-friendly control panel allows seamless control • Precision Weighing System: Ensures accurate dosing, minimizes material waste • Multiple Mix Recipes: Easily switch between different mix designs • Separate Storage Bins: 3x8 m³ aggregate hoppers, 5-ton cement silo, water & additive tanks • Filling Conveyor: Fast and efficient loading • Quick Setup: Ready to operate in just 10 minutes • Fully Mobile: Maximum ease in site-to-site transportation • Low Logistics & Transport Costs: On-site production eliminates ready-mix losses • Sustainable Production: Mix only what you need, when you need it • Recycling-Friendly: Supports the use of recycled materials when needed ⸻ ? Multi-Purpose Capability – One Platform, Many Solutions: In addition to concrete production, the PVB150 is engineered to serve as: • Mechanical Stabilization Plant • Cold Asphalt Mixing Plant • Emulsion Mixing Plant • Soil Compound Mixing Plant This multi-functional system makes Polygonmach PVB150 the most versatile solution on the market for road construction, infrastructure development, and short-term or small-to-medium scale projects. ⸻ ?? 100% Made in Turkey | Smart Technology | High Performance | Eco-Friendly Operation ✅ Replace fixed plants with a smarter solution. ✅ Reduce setup costs, increase mobility, boost site efficiency. ⸻ ? Contact us today and transform your jobsite! ? ? ?

Condition: used, Year of construction: 2012, functionality: fully functional, total width: 1,370 mm, total length: 2,950 mm, total height: 1,800 mm, We offer this used Profi Packer SCV 400 film wrapping machine, manufactured in 2012. Manufacturer: Profi Packer Model: SCV 400 Year of manufacture: 2012 Condition: used Category ID: 1262 Type ID: 907 Machine type: Film wrapping machine Machine dimensions (L x W x H): 2,950 x 1,370 x 1,800 mm Cycle rate per minute: approx. 65 cycles Film thickness: 7 to 80 μm Includes infeed conveyor and hot air tunnel for heat sealing. Nodpfx Afezvdadj Selg If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, axle configuration: 3 axles, first registration: 03/2004, total length: 13,750 mm, total width: 2,550 mm, suspension: air, tire size: 215/75 R 17.5, wheelbase: 9,500 mm, Year of construction: 2004, Equipment: ABS, = Additional Options and Accessories = - Lift axle - Air suspension = Further Information = Axle configuration Tyre size: 215/75 R 17.5 Axle brand: BPW Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Twin tyres; Tyre tread left inner: 60%; Tyre tread left outer: 60%; Tyre tread right inner: 60%; Tyre tread right outer: 60% Rear axle 2: Twin tyres; Tyre tread left inner: 60%; Tyre tread left outer: 60%; Tyre tread right inner: 60%; Tyre tread right outer: 60% Rear axle 3: Twin tyres; Tyre tread left inner: 40%; Tyre tread left outer: 40%; Tyre tread right inner: 40%; Tyre tread right outer: 40% Njdszvcwhspfx Af Selg Weights Unladen weight: 10,730 kg Payload: 30,270 kg Gross vehicle weight: 41,000 kg Condition Damage: none Identification Registration number: OH-27-LL

Condition: used, mileage: 522,000 km, power: 279 kW (379.33 HP), first registration: 09/2009, fuel type: diesel, tire size: 385/55 R 22.5, axle configuration: 10x4, wheelbase: 7,730 mm, fuel: diesel, driver cabin: day cab, gearing type: mechanical, emission class: euro5, suspension: other, total length: 10,000 mm, total width: 2,550 mm, Year of construction: 2009, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, = Additional options and accessories = - Aluminum fuel tank - Digital tachograph - Air suspension - PTO (Power Take-Off) - Radio/CD player - Sun visor = Further information = Technical information Number of cylinders: 6 Engine displacement: 11,705 cc Axle configuration Axle 1: Tire size: 385/55 R 22.5; Steered; Left tire tread: 35%; Right tire tread: 35%; Suspension: Leaf spring Axle 2: Tire size: 385/55 R 22.5; Steered; Left tire tread: 50%; Right tire tread: 50%; Suspension: Leaf spring Axle 3: Tire size: 295/80 R 22.5; Twin tires; Left inside tread: 40%; Left outside tread: 40%; Right inside tread: 40%; Right outside tread: 40%; Reduction: single reduction; Suspension: Air suspension Axle 4: Tire size: 295/80 R 22.5; Twin tires; Left inside tread: 30%; Left outside tread: 30%; Right inside tread: 30%; Right outside tread: 30%; Reduction: single reduction; Suspension: Air suspension Axle 5: Tire size: 435/50 R 22.5; Left tire tread: 25%; Right tire tread: 25%; Suspension: Air suspension Weights Unladen weight: 17,860 kg Payload: 32,140 kg Gross vehicle weight: 50,000 kg Condition Nlodpezvcr Ejfx Af Ssg Damages: none

Condition: used, Please contact Team DPX for more information Beschikbare containers: Available containers: DPX-29037 - 20FT USED 2011 silent container - €12.500,- (photo 1) DPX-29040 - 20FT NEW 2015 silent container - €15.00,- (photo 2) DPX-29046 - 20FT NEW 2015 silent container - €15.000,- (photo 3) Nlodsxpcwhjpfx Af Seg DPX-29048 - 40FT HC NEW 2017 silent container - €18.500,- (photo 4) DPX-29049 - 40FT HC NEW 2017 silent container - €18.500,- (photo 5) DPX-29050 - 40FT HC NEW 2023 silent container - €25.000,- (photo 6)

Condition: excellent (used), Year of construction: 2009, operating hours: 4,824 h, functionality: fully functional, power: 5.52 kW (7.51 HP), 1 x Atlas Copco Airpower B.V. rotary screw compressor and refrigerant air dryer mounted on 200L receiver tank. Manufacturer - Atlas Copco Airpower B.V. Model - GX5 FF. Serial number - CAI361147. Nedpozu Aw Sofx Af Sjlg Date of manufacture - 2009. Working pressure - 10 bar. Working hours - 4824 hours. Electrical requirements: Compressor - 400 V / 50 hz / 3 phase. Air dryer - 230 V / 50 hz / 1 phase.

Year of construction: 2025, condition: new, Singlebeltpress up to 800 kg/h on fresh apples including automatic belttensioning and regulatingsystem integrated highpressure-beltcleaning-system inverter for beltspeed Njdo S Un Dopfx Af Solg Wash&Grinding Unit with 3,0 Kw full stainless-steel construction

Condition: good (used), Code: 0476 Brand: MASTERWOOD Model: B 1/V - CE Standard Vertical chisel mortising machine for cutting recesses and grooves in wooden joinery, doors, beams and other items – CE Standard Technical data: Vertical stroke 150 mm Longitudinal stroke 260 mm Transverse stroke 70 mm Motor power 3 Hp Max workable height of solid wood component 170 mm Min/max workable height of assembled window or door frame 740/1030 mm Work surface 140 x 470 mm Tilt +/- 45° Pneumatic workpiece clamping Suction inlet diameter 60 mm Compressed air 6 bar Overall dimensions mm 1000 x 850 x 1750 h Weight kg 440 Nledpfx Afozqzhbs Sjg

Condition: ready for operation (used), Year of construction: 1994, A Schüco profile rolling machine for the thermal separation of aluminum profiles in window, door and façade construction is available. Processing speed: 45m/min, control speed: 15m/min, max. profile height: 400mm, max. profile width: 250mm, max. insulating bar width: 300mm, machine dimensions X/Y/Z: approx. 2700mm/800mm/1650mm, weight: approx. 900kg. Including automatic insulating bar feeder, safety cage/alignment roller set, roller conveyor and roller conveyor extension. Documentation available. On-site inspection is possible. Nodjwtg Hwjpfx Af Solg

Condition: used, Year of construction: 2007, Foil wrapping machine Hugo Beck CWS 500 Year: 2007 Nodpfxeulixqj Af Solg Description: - L-sealer Shrink tunnel

Condition: used, Foil wrapping machine Clamco DEM Description: - L-sealer - Foil unit - Shrink tunnel Power supply : 220 Volt, 3 phases Nlsdpfjtlfhyjx Af Sog

Year of construction: 2000, condition: used, Foil wrapping machine OMG Autofard Year: 2000 Description: - Straight infeed Nljdpfxoku H Aie Af Ssg - Foil unit - Shrink tunnel Maximum speed 15 piles/products a minute

Condition: used, functionality: fully functional, With this offer, you are purchasing a used black-and-white production system, the “OCE VarioPrint 6180 Titan.” Items for Sale: 1x OCE VarioPrint 6180 Titan with the following features: Includes 2x HC52 finishers Includes 3x Pims paper decks Meter readings: Total: Approx. 39,188,579 pages Condition: This listing is for a used device that may show signs of wear (minor scratches or yellowing). The device has been tested for functionality. A test print can be seen in the photo. Packaging and Shipping: Nledpfxezqnb Uj Af Seg You are welcome to view the device during our business hours. Please schedule an appointment! Sturdy packaging and worldwide shipping available upon request! A functional test will be recorded on video for you before shipping or pickup. For more information, please feel free to contact us directly.

Condition: ready for operation (used), Year of construction: 1989, Gear hobbing machine models FD-250, FD-500, FD-630, and FD-900 Manufacturer: CUGIR, ROMANIA Maximum module size: 6 to 12 mm Nlodpfxezuddte Af Sjg Max. working diameter: 250 to 900 mm Accessories: change gears and arbors for all machines Videos showing all machines in operation are available!

Condition: excellent (used), Year of construction: 2018, 1 x Zumex Food Engineering juice extraction and flitration system with elevator and squeezing kits. Manufactured completely in stainless steel. Technical specification ⚙️: ✅ Manufacturer - Zumex Food Engineering ✅ Model - Z450. ✅ Date of manufacture - 2018. ✅ Hopper capacity - 40 kg.  Performance Specification ⚙️: ✅ Sizes 9-10-11: Heat unit - Kit 9, Oranges/minute - 150.35, Output capacity - 902.4 kg/h, Litres/minute - 6.01 L/min, Litres/hour - 360.84 L/hr. ✅ Sizes 5-6-7-8: Heat unit - Kit 8, Oranges/minute - 133.68, Output capacity - 1145.4 kg/h, Litres/minute - 7.64 L/min, Litres/hour - 458.22 L/hr. ✅ Sizes 2-3-4: Heat unit - Kit 7, Oranges/minute - 116.94, Output capacity - 2338.8 kg/h, Litres/minute - 15.59 L/min, Litres/hour - 935.53 L/hr. Njdpfx Ajt Uircof Selg PLEASE NOTE - Estimated calculations with a 40% juice performance of the oranges. FRUIT DIAMETER: Minimum:Ø55mm, Maximum:Ø100mm NET/GROSS:  750/960KG DIMENSIONS (L x W x H):  2.5 x 1 x 2.2m CONSUMPTION:  2.010W VOLTAGE: 380 V / 50-60 Hz / 3 phase.

Condition: reconditioned (used), functionality: fully functional, Spiralmixer Diosna SPV 240 AF with 2 bowls - 240kg dough, Nlodpfxex H Tr He Af Sog - after recondition With Diosna bowl lift

Year of construction: 2013, condition: ready for operation (used), Mariani Shrink film wrapper Model: TRM 700-LF-I YOM 2013 Including in/outfeed conveyor system Nedpsyilyqofx Af Sjlg Working width: 700mm Cardboard Trays – Cases with protective shrinked film Portion packs : 3 x 8 – 3 x 9 – 3 x 10 Family packs : 2 x 6 – 3 x 4 Output: Max 25 trays per min, varying according to the format required Dimensions machine (LxWxH): 5000x1400x2100mm

Condition: ready for operation (used), Year of construction: 2017, operating hours: 10,020 h, pressing force: 173 t, controller manufacturer: TRUMPF, controller model: TASC 6000, Press brake manufactured in 2017. This TRUMPF TRUBEND CELL 5000 with TRUMPF TruBend 5170 features a maximum press force of 1700 kN and a stroke length of 445 mm. It includes the BendMaster 60 robot for automated handling and a TRUMPF TASC 6000 control system for efficient programming. If you are looking to get high-quality bending capabilities, consider the TRUMPF TRUBEND CELL 5000 press brake we have for sale. Contact us for further details. Nljdpfeza U Nfox Af Sjg - Press Brake Model: TruBend 5170 (Extended Version)- Press Brake Max Press Force: 1700 kN- Press Brake Max Working Pressure: 340 bar- Press Brake Length of Stroke: 445 mm- Press Brake Voltage / Frequency: 400 V / 50 Hz- Press Brake Connected Load: 29 kVA- Press Brake Control Voltage: 24 V- Robot Model: BendMaster 60- Robot Connected Load: 17 kVA- Robot Weight: 2600 kg- Robot Voltage / Frequency: 400 V / 50 Hz- Control System: TRUMPF TASC 6000 (Graphical workshop programming, network capability)- Included Equipment: Extended version press brake, BendMaster 60, automated material handling/grippers, fencing and safety enclosuresTRUMPF BENDMASTER 60- Working Hours: 56,582 h (As of 14.05.2025)- Load Capacity: 60 kg (Sheet metal piece plus gripper)- Sheet Metal Capacity: Up to 40 kg- Supply Voltage: 400 V (3~ Phase)- Frequency: 50 Hz- Connected Load: 14 kVA- Control Voltage: 24 V- Max. Fuse Rating: 32 A- Manipulator Axis System: 6-axis backgauge sensor system- Floor Track: Ground track rail extended to 10 m- Control Unit: PC-based TRUMPF control with terminal (Monitor, mouse, keyboard)- Material Handling Features: Contour recognition sheet sensor, double sheet detection sensor, rotary union for rapid tool-less gripper exchange, gripper coupling on BendMaster- Included Vakuum/Gripping Gear: 3 modular vacuum grippers without separation unit, 1 mechanical tong gripper with rotary axis (including 3 sets of additional jaws)- Feeding Station: 1 sheet extraction station with linear axis- Peripheral Accessories: 1 gripper changing console (max. 4), 1 mobile fanning magnet, safety enclosure fence with access door Technical Specification Bending Length 4250 mm

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, REF: MM6424 1 x AL Tech UK Labelling Technologies Ltd high-performance 'print and apply' label applicator with infeed conveyor and Zebra ZE500 printer. Used to apply labels onto the short and long sides of pre-formed cardboard boxes. Manufacturer - ALTech UK Labelling Technologies Ltd. Model - ALritma S. Nodsy Uni Njpfx Af Solg Date of manufacture – 2020. Controls - 40 x programs, controlled by colour 4.3'' touch-screen. Label width - 20 mm to 107 mm wide. Speed - 50 m/minute. Electrical requirements - 110-230 V / 50-60 hz / 1 phase. Video available on request.