Used Morara Cylindrical Grinding Machine for sale (65,669)

Condition: used, Year of construction: 2005, Junker cylindrical grinding machine, type EJ 10 Year of manufacture: 2005 Control system: Siemens 810 Distance between centers: 150 mm Center height: 100 mm Maximum workpiece weight: 5 kg Maximum grinding wheel diameter: 400 mm Nljdpfx Ajznx Hcsg Ish Maximum grinding wheel width: 63 mm Grinding wheel bore: JUNKER spindle bore 27 mm This offer is exclusively aimed at business operators within the meaning of §14 of the German Civil Code (BGB).

Condition: used, Year of construction: 2006, grinding diameter 350 mm grinding length 1000 mm centre height 175 mm Nlsdpfxjt Ii Nbo Ag Ieh weight of the machine ca. 3,5 t Machine completely overhauled with 12 months warranty Mechanically and optically like new Photos from the last overhauled machine with different options Fanuc 21i control -Grinding head UR 1-2-3 external/internal/plan -Axis automatic 1° Hirth serration -Active longitudinal positioning KEL-POS Movomatic -Semi-automatic balancing device KEL-BALANCE -Grinding wheel equipment left 400mm diameter -Grinding wheel equipment right 300mm diameter -Internal grinding unit with belt drive -Tailstock with micro-adjustment -fine adjustment upper table -Paper belt filter SBP4 240l

Condition: used, grinding diameter 250,350,450 mm grinding length 600 mm centre height 125,175,225 mm grinding wheel diameter 400 mm grinding wheel width 50 mm bore 127 mm MK5 work piece spindle speed 20-400 U/min grinding head swivelling 360 ° grinding spindle head - swivable 180 + - ° grinding spindle speed 1500,1700,2200 U/min 0,001-0,030 mm/Ø 0-0,95 mm/Ø ±10 ° longitudinal feed of the table 900 mm table speeds 0,02-6 m/min 130 kg 130 inkl. Spannugkg kg 70 mm total power requirement 6,5 kW Nodpfed Ih D Nsx Ag Islh weight of the machine ca. 2,2 t dimensions of the machine ca. 3,1 x 2,0 m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service for your machines.Overhauled with geometric KELLENBERGER protocoll -2-axis DRO -Paper filtration Die Werkzeugmaschine entspricht zum derzeitigen Zeitpunkt nicht den grundlegenden Sicherheits- und Schutzanforderungen wie in der BetrSichV 2015 genannt. Eine Anhebung des erforderlichen Mindest-Schutzzieles ist mittels einer Gefährdungsbeurteilung nach BetrSichV zu ermitteln.

Condition: used, Year of construction: 2010, grinding diameter 350 mm Nsdjy U N Hispfx Ag Islh grinding length 1000 mm centre height 175 mm Control Fanuc 310is CNC control GE Fanuc 310is Hand panel for CNC control GE Fanuc Wenger loader optional Turned part with automatic indexing 1° Grinding head UR 1-2-3 Grinding wheel equipment left 500 x 80 mm Grinding wheel equipment right 400 x 63 mm Operating unit for one high-speed internal grinding spindle MFV / MFZ High-frequency internal grinding spindle MFN 1090 Coolant supply through the workpiece spindle Dressing unit on the upper table Swivelling holder for PCD diamond plates Basic module for KEL-TOUCH gate sensor and KEL-BALANCE balancing devices KEL-TOUCH lead sensor for universal grinding head variants R / RS / UR / URS KEL-TOUCH on the workpiece headstock for internal and external grinding Preparations for Movomatic ESZ 400 or Marposs P7 ME measuring controls Preparation for external filters Cooling lubricant switch-off for table devices Full casing emulsion Emulsion sanding mist extraction system Maintenance unit for additional pneumatic functions Preparation for KEL-VITA gantry loader KEL-POS, MOVOMATIC: C25 measuring probe Hydraulic preparation for arobo bezel

Condition: used, MYFORD MG 12 HM UNIVERSAL CYLINDRICAL GRINDING MACHINE MAKE MYFORD, MADE IN ENGLAND MODEL MG 12 HM YEAR MID 90s SWING 127.0 mm LENGTH 305.0 mm Njdpfx Aoy Nmg Aog Ielh PLUS HYDRAULIC MOVEMENT DROP DOWN INTERNAL INFINITELY VARIABLE SPEED CONTROL ON THE WORK HEAD SPARE SWIVELLING WORK HEAD RANGE OF TOOLING

Condition: good (used), Year of construction: 1997, Ref. -No.: 10619 Nsdpezc D Dqjfx Ag Islh Manufacturer: KELLENBERGER Type: 600 U Nr. 35 Year of construction: 1997 Type of control: Konventionell Control: n/a Storage location: Halberstadt Country of origin: Switzerland Distance between center: 600 mm Center height (standard): 125 mm Height of centers by lifting work blocks head and tailstock: 175 - 250 mm Swing diameter with lifting blocks max.: 350 - 500 mm Table swivel / each side: 10 ° Dwell time of the table reversal: 0- 5 Sec Diameter / width / hole: 250 x 13 x 76 mm Speeds of the grinding wheel spindle: 1500 / 1700 / 2200 / 3600 Swiveling grinding wheel head: 360° ° Cross movement of the grinding wheel head: 285 mm Quickly pulling the wheel head back and forth: 40 mm Intermittent injection for each reversal of the table: 0,001 - 0,03 mm / dia Working speeds continuously adjustable (normal / special): 20-400 / 10-400 Max. Grinding length: 900 mm Further information: The machine can be viewed while powered up.

Condition: good (used), cylindrical grinding machine Nledpfx Aotrgukog Ioh

Condition: used, grinding diameter 250,350,450 mm grinding length 1500 mm centre height 125,175,225 mm grinding wheel diameter 400 mm grinding wheel width 50 mm bore 127 mm MK5 work piece spindle speed 20-400 U/min grinding head swivelling 360 ° grinding spindle head - swivable 180 + - ° Nedpfx Aed Ih Dveg Iolh grinding spindle speed 1500,1700,2200 U/min 0,001-0,030 mm/Ø 0-0,95 mm/Ø ± 6 ° longitudinal feed of the table 1750 mm table speeds 0,02-6 m/min 130 kg 130 inkl. Spannugkg kg 80 mm total power requirement 6,5 kW weight of the machine ca. 2,9 t dimensions of the machine ca. 5,6 x 2,0 m Overhauled machine according to Kellenberger new machine protocoll

Condition: used, Year of construction: 2003, grinding diameter 350 mm grinding length 1000 mm centre height 175 mm Njdpfx Aez Rkbieg Islh Sehr gut erhaltene Kel-Vista Steuerung FANUC 21i Maschine erhält Wartung und Geometrie nach Kellenberger Messprotokoll. -B-Achse automatisch 2,5° -T1 Schleifscheibendurchmesser 400mm -T2 Schleifscheibendurchmesser 300mm -T3 Innenschleifeinrichtung riemengetrieben -Reitstock mit Mikroverstellung -pneumatische Entlastung Obertisch -Sinuslineal -Aktive Längspositionierung Kel-Pos -GAP Anschnitt Sensor -Messsteuerung Movomatic -Papierbandfilter

Condition: ready for operation (used), An external cylindrical grinding machine Kellenberger is available. Distance between centers: 1000mm, center height: 175mm, max. workpiece diameter: 250mm, travel X/Z: 1000mm/220mm, grinding wheel diameter: 500mm, speed: 1530rpm. Machine dimensions X/Y/Z: approx. 3000mm/1850mm/1750mm, weight: approx. 3150kg. A viewing on site is possible. Nljdpfoxxzi Isx Ag Ieh

Condition: used, Year of construction: 2002, grinding diameter 350 mm Nlodpfxjzz S Awj Ag Ish grinding length 1000 mm centre height 175 mm

Condition: excellent (used), functionality: fully functional, KELLENBERGER PRECISION UNIVERSAL CYLINDRICAL GRINDING MACHINE TYPE: 1000 U YEAR OF MANUFACTURE: 2000 PARTIAL OVERHAUL: 2026 Nljdpfx Agoyf E Sue Ish Center height: 175 mm Grinding length: 1000 mm Equipment: - Standard accessories - Workpiece spindle stock, standard MK5 with adapter flange DIN 55027, size 5 - Splash guard for the above - Tailstock with micro-adjustment, MK4 - Internal grinding device with protective cover for the grinding spindle D: 80 mm for belt-driven spindles - FISCHER internal grinding spindle, type HJN 842 including grinding mandrels (4 pieces, customer's choice) - Chuck HJNZ 42 - Oil mist lubrication system for HJN spindles - STREULI magnetic paper band filter system, type: SPB 2 - Coolant supply through the workpiece spindle - HEIDENHAIN digital length measuring system in X and Z axes - Sinus scale on the workpiece spindle stock including alignment mandrel MK5 - Permanent magnet chuck, D: 200 mm - Three-jaw chuck, D: 160 mm - Four-jaw chuck, D: 160 mm - Collet chuck system for Schaublin collets B32 - Set of collets B32, D: 1.0-30.0 mm, graduation 0.5 mm (59 pieces) - Indicator stop for table swiveling with 1/100 mm indicator - Table fixed stop - Truing stop for internal grinding - LED machine light - Various grinding wheel flanges, left (2 pieces) - Pneumatic upper slide relief - Swiveling truing device for truing during external, surface, or internal grinding - Set of vibration-damping pads - New three-color paint finish (light gray RAL 7035 / blue RAL 5012 / dark gray RAL 7016) - New acceptance test report according to KELLENBERGER standard - Documentation - CE conformity

Condition: refurbished (used), Year of construction: 2025, operating hours: 50 h, machine/vehicle number: 3018-04, Country of manufacture: Switzerland Voltage: 380/50/3 Net weight: 3100 kg Overall dimensions: 230x155x170 cm Installed power: 13 kVA Customs tariff position: 8460.2920 TECHNICAL SPECIFICATIONS MAIN DIMENSIONS Distance between centers: 650 mm Grinding capacity SpW+bs: -80 Stroke: 700 LONGITUDINAL SLIDE Max stroke: SpW+50 mm Minimum automatic feed: 1.5 mm Nlsdpew T Sd Tofx Ag Ijh Speed: 50-5500 mm/min Reversal delay: 0-6 sec Maximum table swivel: 12°/10°/8.5°/6° Pneumatic relief for table and workhead CROSS SLIDE Max stroke: 300 mm Rapid traverse: 60 mm Plunge grinding depth in diameter: 3.4 mm Feed 1: 0.012-6 mm/min Feed 2: 0.012-1.2 mm/min Feed per pulse: 0.001-0.05 mm GRINDING WHEEL HEADSTOCK Left-side wheel, external grinding: 400x80x127 mm Drive power: 5.5 kW Peripheral speed: 35 m/s RPM: 1670/2110 min-1 Internal grinding device for belt-driven spindles, including drive unit: 1.5 kW WORKHEAD Swivel range: 0-90° Continuously variable RPM: 30-1000 min-1 Internal taper: Morse 5 Collets: W-25 Drive power: 0.55 kW Maximum workpiece weight between centers: 130 kg Grinding load between centers: 100 Nm TAILSTOCK Internal taper: Morse 3 Quill stroke: 35 mm Fine adjustment for cylindricity correction: ± 40 μm TECHNICAL CHARACTERISTICS: GUARANTEED WORKING ACCURACY Straightness of the generator over 630 mm: 0.003 mm Roundness during chuck grinding: 0.0003 mm CONNECTION VALUES Maximum absorbed power: 13 kVA Maximum permitted voltage fluctuation: -15%/+10% Maximum permitted frequency variation: ± 3% Required compressed air pressure: 5 bar Unless otherwise stated or in case of error or omission, these technical details are provided without engagement.

Condition: used, center height: 100 mm, grinding length: 500 mm, Cylindrical grinding machine FORTUNA R 500 for sale. The machine was last operated in 2017 and has been stored in a warehouse since then. Therefore, it is being sold as defective – without warranty. Loading is possible. Nljdpfjxx T Ezsx Ag Ieh

Condition: used, Year of construction: 2002, grinding diameter 450 mm grinding length 1500 mm centre height 225 mm Control FAGOR EQUIPEMENT - T1: grinding wheel diameter 500 mm - T2: grinding wheel diameter 400 mm - T6: HF Fischer spindle MFV or MFZ 1224/1242/1260 - T7: HF Fischer spindle MFV or MFZ 1224/1242/1260 - Marposs tool measurement - active longitudinal positioning - Elaso GAP-control on T1 and T2 contactless integrated in the control surface - Elaso GAP internal grinding with fluid sensor for T6 and T7 - semi-automatic balancing by Elaso integrated in the control surface for T1/T2 - tailstock hydraulic with fine adjustment +/- 150 microns - dresser on workpiece spindle side table mounted - dresser on tailstock side table mounted - dresser on upper table - new service- and userfriendly housing SPECIAL EQUPEMENT: Workhead with direct drive - strongly recommended for non-circular grinding - workpiece weight flying max. 75kg - workpiece weight between centres 150kg - water-cooled B-axis with direct drive - center height 225 mm - extremely torsionally stiff - highly accurate positioning - resolution ° - water-cooled Hydrostatic ball screw - x-axis - wear-free, as there is no contact during operation - no loss of precision, even during long-term use at full load and maximum speed - no friction at low speeds - no friction force backlash when the direction of rotation changes - translates even the smallest rotational movements - no stick-slip effect even at low speeds - no fluctuations in frictional torque due to ball circulation - higher axial stiffness compared to ball screws - significant improvement in damping, resulting in better workpiece surface finish and tool life - no oscillations due to ball circulation - also suitable for high speeds and accelerations - cost-effective alternative to the linear motor with greater precision and significantly lower heat generation - significantly less power dissipation and, as a result, no problems with swarf on permanent magnets New hydraulic unit - optimized temperature control (chiller) - Energy-saving Only one pump controlled by VFD - Pressure monitoring - monitoring of the hydrostatic oil for water content. (Damage to the bellows is recognised and detected prematurely) -fine adjustment +/- 150 microns Paper belt filter 375l – alternative 480l Grinding mist extraction system – emulsion MECHANICAL OVERHAUL -complete machine according to Kellenberger protocoll -new painting Nedpfxouxfu Ne Ag Islh ELECTRICAL OVERHAUL - new modern Fagor CNC with BEMA HMI - new electric cabinet - new digital drive technology - replacement of all electrical cables, switches etc. - new absolute external scales in x- and z-axis - new absolute encoder (B-axis) Grinding software BEMA-Standard: - workpiece zeroing - grinding wheel zeroing - dressing diamond measuring - corrections - external and internal surface grinding - external and internal angle grinding (turning of the b-axis, dressing with straight wheel) - external and internal radius grinding (radius dressed on wheel) - semi-automatic traverse grinding - workpiece zeroing - 2 dressing diamonds - 1 dressing blade - dressing roll - 3 flat dresser - corrections - Z-position measurement - GAP control Optional grinding cycles at no extra charge: Profile plunge grinding: - external and internal profile plunge grinding with profile wheel Pr...

Condition: good (used), Year of construction: 2001, Ref. -No.: 10617 Manufacturer: KELLENBERGER Type: 600 U Nr. 36 Year of construction: 2001 Type of control: Konventionell Control: n/a Storage location: Halberstadt Country of origin: Switzerland Distance between center: 600 mm Center height (standard): 125 mm Height of centers by lifting work blocks head and tailstock: 175-250 mm Swing diameter with lifting blocks max.: 350 - 500 mm Table swivel / each side: 10 ° Dwell time of the table reversal: 0 -5 Sec Diameter / width / hole: 250 x 13 x 76 mm Speeds of the grinding wheel spindle: 360° Cross movement of the grinding wheel head: 285 mm Quickly pulling the wheel head back and forth: 40 mm Intermittent injection for each reversal of the table: 0,001 - 0,03 mm / dia Micro-corrector of the feed, 1 division of the dial: 0,001 mm / Ø Nlodpszc D Dkefx Ag Ieh Working speeds continuously adjustable (normal / special): 20 - 400 / 10-400 Max. Grinding length: 900 mm Further information: The machine can be viewed while powered up.

Condition: used, Year of construction: 2000, grinding diameter 500 mm grinding length 1000 mm centre height 250 mm -major maintenance -New table geometry -partial painting of the interior grinding wheel equipment LEFT 400x63x127mm (standard) grinding wheel equipment RIGHT 300x40x127mm Internal grinding unit Ø120mm for HF spindles CNC control KELCO 120 C-axis for non-circular grinding. Kel-Poly Nljdpfx Ajxzk Niog Ijh B-AXIS: CNC-controlled B-axis KELCO 120: v constant 35m/s or 45m/s High-frequency internal grinding spindle Operating unit for MFV and MFZ spindles Hydraulic quill retraction for the tailstock NO micro-adjustment on the tailstock Spring-loaded quill insert Top table cooling Standard workpiece headstock MK 5 DIN 55026 size 5" Micro-adjustment for the standard workhead Dressing device on the lower table Active longitudinal positioning KELPOS, MARPOSS, mounted on the grinding head Tool measuring system KELSET, MARPOSS MARPOSS gate sensor Measuring control MARPOSS Minialsar prepared Paper belt filter

Condition: ready for operation (used), Year of construction: 1999, operating hours: 38,700 h, functionality: fully functional, machine/vehicle number: 011.0389.90.065, distance between centers: 1,000 mm, grinding spindle motor power: 7,500 W, overall weight: 7,000 kg, Manufacturer: Studer Model: S40 Year of manufacture: 1999 Machine number: 011.0389.90.065 - Control system: Fanuc 16T - Controlled C-axis - Distance between centers: 1000 [mm] - Center height: 175 [mm] - Travel (Z/X): 1050 x 275 [mm] - Max. feed rates (Z/X): 10 x 5 [m/min] - Grinding spindle type: 2 external - 2 external left grinding wheel dimensions: 500 x 80 x 203 [mm] Nledpfx Agjz Iudho Ieh - Grinding motor power: 7.5 [kW] - Speed: 1670 - 2110 [rpm] - Grinding spindle orientation: -15 to +225 [°] - Resolution: 1 [°] - Workpiece spindle taper: MK5 - Workpiece spindle speed: 1 - 1027 [rpm] - Workpiece spindle power: 0.785 [kW] - Tailstock: MK3 - Quill travel: 35 [mm] - Weight: 7000 [kg] - Operating hours: 38,000 hours

Condition: used, Year of construction: 1989, Technical details: grinding diameter: 300 mm Nedpfx Asy Nk Hmjg Islh grinding length: 540 mm centre height: 175 mm total power requirement: 20 kVA centre distance: 1000 mm

Condition: used, Year of construction: 2010, grinding length 1025 mm grinding width 520 mm Control SINUMERIK 840 D tool taper HSK-A 63 A - axis ° workpiece weight 30 kg distance grinding spindle - table min./max. 473,5 - 1023,5 mm x-axis 520 mm y-axis 550 mm z-axis 1000 mm V-axis 166 mm feed x-axis 4 - 6.000 mm/min feed y- axis 4 - 4.000 mm/min Feed z- axis 30 - 25.000 mm / min. table dimensions 1.400 x 874 mm spindle speeds (infinitely variable) 0 - 12.000 U/min power capacity - grinding motor 35,00 kW grinding wheel diam. min/max. 100 / 300 grinding wheel width 60 mm Nlsdpfxevxwine Ag Ioh total power requirement 100,00 kW weight of the machine ca. 11,00 t dimensions of the machine ca. 8,60 x 7,25 x H3,80 m 5 Axis Profile grinding machine, with SIEMENS SIN840D, double dividing head (B-C axis), V-axis (coolant nozzles), EROWA tool changing device (machine can also be operated without a tool changer), fire extinguishing device, Renishaw probe prepared. Without Host-Computer for workpiece- tool-management. without coolant device - was connected to the central supply.

Condition: excellent (used), functionality: fully functional, center height: 125 mm, grinding length: 600 mm, grinding diameter: 249 mm, control cabinet length: 1,200 mm, control cabinet width: 40 mm, grinding spindle speed: 1,530 rpm, control cabinet height: 1,500 mm, overall weight: 3,250 kg, For sale is a cylindrical grinding machine manufactured by Kellenberger. The machine is in very good condition. Make: Kellenberger Nedpfx Agoyyn Ehe Islh Model: R 125x600 Technical Specifications: Centre distance: 600 mm Centre height: 125 mm Workpiece diameter: 249 mm Power requirement: 10 kW Table: Travel: 700 mm Travel per handwheel turn, coarse/fine: 20/2.5 mm Speed, hydraulically adjustable: 0.02–6 m/min Minimum reversing travel: 1.5 mm Dwell time at reversal, adjustable: 0–5 sec Swivel range: 11 degrees Cross slide: Travel with feed handwheel, coarse/fine: 220 mm Travel per handwheel turn, coarse/fine: 4/0.5 mm Rapid traverse and return, hydraulic: 50 mm Feed, electro-mechanical with stepper motor: 0–9.99 mm/Ø Micro-stop of feed, per graduation: 1 µm/Ø Plunge grinding: Feed rate coarse/fine: 1–49/0.2–2.8 µm/sec Grinding spindle head: Grinding wheel, diameter x width x bore: 500 x 80 x 203.2 mm Motor rating: 5.5 kW Grinding spindle speeds: 1220, 1360, 1530 rpm Workpiece spindle head: Swivel range: 360 degrees Speeds, steplessly adjustable: 20–400 rpm Spindle internal taper: Morse 5 Motor rating: 0.9 kW Tailstock: Quill internal taper: Morse 3 Quill travel: 30 mm Machine dimensions: 2800 x 1850 mm Weight: approx. 3000 kg

Condition: used, Year of construction: 1984, overall weight: 1,500 kg, capacity: 400 x 200 mm Nledpfo Abbi Rjx Ag Ish device for indoor use.

Year of construction: 2024, condition: refurbished (used), functionality: fully functional, Grinder for shafts and bores after complete overhaul and reconstruction. Nledpofhk Iusfx Ag Ieh

Condition: excellent (used), Year of construction: 1980, Karstens K11 1000 This Karstens K11 comes from a university and has seen very little use. All cables and hoses in the wet area have been replaced. It has extremely few operating hours. Since we specialize in Karstens round grinding machines, we can offer you complete service (electrical and mechanical) for the machine after purchase. Technical data: Center distance: 1000 mm Center height: 180 mm Workpiece weight: 70 kg cantilevered, 250 kg between centers Grinding wheel diameter: 400 mm Workpiece spindle: MK 4, speed continuously adjustable 30-450 rpm, swivel range 0 - 90 ° Tailstock: MK4, quill travel 45 mm Tailstock rest next to the Z-axis table Quill force: 200-600 N Table tilt: 12.5 degrees Adjustable travel of the feed spindle: 80 mm Rapid traverse: 50 mm Coarse adjustment with air cushion: 280 mm Grinding spindle motor (external): 4 KW Grinding spindle motor (internal): 2.2 KW Workpiece spindle motor: 0.55 KW Machine weight: Net 3500 kg Feed drive via DC motor Nodpfxoh Rit Eo Ag Iolh Air cushion-supported rapid adjustment of the grinding spindle stock for quick and safe positioning of the grinding position. Separate drive for the spindles for external and internal grinding. Fully automatic working cycle, feed movement via a wind rose switch: Rapid traverse forward, rapid traverse backward, grinding operation, feed stop, mym feed. Automatic longitudinal grinding cycle Central coolant supply for all grinding points Workpiece spindle stock with continuously adjustable drive for both rotating and lockable spindle. Feed control for longitudinal grinding and face grinding, input for retraction, feed amounts, feeds, dwell times, clearance strokes Digital display for X-axis from Heidenhain Paper band filter system can be offered upon request. Similar to Weiss/EMAG/GP round grinding machines/Studer/Kellenberger/Schaudt/Tschudin/Tacchella/Dannobat .

Condition: defective spare-parts repository (used), Year of construction: 2001, functionality: not functional, Unfortunately, the machine is not functional due to an electrical problem. Mechanically, everything is in order. The machine has two external grinding wheels and one internal grinding attachment. The B-axis has a 2.5-degree gear. Njdpsz Ikz Njfx Ag Ijlh