Used Mep - Vollautomat Shark 331-1 Nc 5.0 Spider for sale (80,299)

Condition: used, Year of construction: 2006, operating hours: 107 h, functionality: fully functional, machine/vehicle number: 365591, working range: 4,250 mm, travel distance X-axis: 2,200 mm, travel distance Y-axis: 4,250 mm, travel distance Z-axis: 200 mm, type of input current: three-phase, input voltage: 400 V, sheet thickness aluminum (max.): 100 mm, FLOW Waterjet Cutting Machine IFB-12 – Waterjet System Pedsy D A Ifopfx Ahcsra We are selling our Flow waterjet machine with an additional special stainless steel water tank. Food-grade / Industrial / Chemical applications The machine has been in use with us for 2 years. No emergency sale – being sold due to purchase of a new machine. The system is in very good condition Fully functional Manufacturer: Flow Year of Manufacture: 2006 Type: IFB Model: IFB 12’ Base Serial No.: 365591 Laser type: Renishaw Transport dimensions Forklift pockets: 17x10 cm Total height: 220 cm Total width: 480 cm Total length: 450 cm Tank Length: 425 cm Width: 255 cm Data sheet for the machine is available (PDF upon request) Inspection before purchase is possible and encouraged. Delivery available on request. Sale as-is in condition shown in the pictures.

Condition: new, Year of construction: 2026, Hot Air Lance HL-1 is a high-quality and efficient equipment. Hot Air Lance for pavement crack sealing preparation is a self-contained mobile unit for cleaning and drying of cracks, joints, potholes and chips in asphalted and concrete road surfaces, before pouring them with bitumen or bitumen polymeric materials. Powerful hot air flow removes moisture and particles of debris, grass, soil, dust, dirt, small stones, etc. leaving cracks dry, clean and ready to be filled with bitumen materials. Reasons to Buy Hot Air Lance from TICAB • Low price because of no mediators. • Always in stock. • 1-year warranty. • Full support from the manufacturer. Technical specifications: Prodsvpqp Aopfx Ahcja - Propane gas (consumption 5 kg / h); - Gas working pressure: 0.2-0.3 bar; - Gas bottle capacity - 50 l; - Compressor unit weight - 107 kg; - Output air temperature: not less than 400 ° C; - Hot Air Lance weight - 6 kg - Hot Air Lance length: 1500 mm; - Wheeled stand weight: 4kg; - Compressor capacity - 600 l / min; - Engine power: 7 hp.

Condition: new, functionality: fully functional, power: 4.3 kW (5.85 HP), gearing type: other, fuel type: gasoline, color: red, empty load weight: 150 kg, axle configuration: 1 axle, emission class: none, mast type: other, brakes: other, Year of construction: 2026, Equipment: low noise, TICAB Heat Air Lance HL-1 | Professional Asphalt Heat Tool – Road Repair, Crack Sealing & Surface Preparation Equipment The TICAB Heat Air Lance HL-1 is a high-performance gas-powered heat lance designed for asphalt surface preparation, crack cleaning, preheating joints, weed removal, asphalt softening, and bitumen reheating. A must-have asphalt heat tool for road contractors, paving crews, municipalities, utility companies, and surface maintenance professionals seeking efficient heat applications and improved bonding results. Key Features • Heat air lance / asphalt heat tool for asphalt warming, crack prep, and surface softening • Ideal for pre-repair heating, loosening old asphalt material, surface drying, and bitumen melting Psdpfx Aex U Ayvehcjra • High-temperature flame output for consistent heating of asphalt, bitumen, and sealing joints • Gas-powered design for mobile, flexible operation on job sites • Compact, lightweight, and easy to handle for precision work in tight spaces • Durable construction built for heavy-duty road maintenance applications Applications • Weed removal and surface cleaning ahead of maintenance • Asphalt surface preparation before crack sealing or patching • Preheating asphalt joints and edges for improved sealant adhesion • Softening old asphalt, bitumen reheating, and material conditioning • Municipal roads, highways, parking lots, driveways, sidewalks, bike paths, and industrial areas Why Choose TICAB HL-1: It is designed to improve sealant adhesion, accelerate repair workflows, and enhance overall pavement maintenance quality — making it a trusted choice for contractors and municipal crews focused on efficient, professional road repair results. HL-1 combines powerful heating performance, mobility, and precision to deliver superior asphalt surface prep and crack sealing readiness. Contact us now for price, delivery options, and full technical specifications. Boost your asphalt prep and repair workflow today!

Condition: used, TECHNICAL DETAILS - Spindle number : 1 Pedpfxjug U Dyj Ahcsra - Honing range : Ø 1,5 - 50 [mm] - Honing stroke : 0 - 100 [mm] - Spindle speed : 150 - 2500 [Rpm] - Dimensions : 1550 x 800 x 1450 [mm]

Condition: new, Year of construction: 2024, Grinding wheel D x B 455 x 255 mm, workpiece diameter 1 - 60 mm, regulating wheel D x B 255 x 255 mm, regulating wheel speed 10 - 100 rpm, Psdpfx Ajdlgq Ushcora drive power 11 kW, weight approx. 3.7 tons, dimensions approx. 2,700 x 1,700 mm Machine suitable for continuous and plunge grinding, hardened and ground guideways, grinding and regulating spindle with hydrodynamic three-point bearing, central lubrication for slides and feed spindles, regulating wheel drive via DS motor, frequency-controlled, hydraulic dressing devices for grinding and regulating wheel, electrical equipment predominantly with Siemens components, electrical control cabinet assembled in Germany, GC 1810-NC with stepper motor and Siemens S7 control for plunge and feed movement. Very economical price/performance ratio.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 153-06SP0610, compressed air connection: 8 bar, Textile screen printing machine with 10 stations and 6 printing units (Made in Germany), with only 454,220 prints, and 2 x Digiflash Rutland intermediate dryers. The machine is fully functional, in good condition, and can be inspected in operation until the beginning of October. • 10 aluminum sandwich pallets 420 x 600 mm • 10 aluminum sandwich pallets 320 x 600 mm • Various squeegees • Power requirements: 3 x 400 V, 50 Hz, 16 A • Digital microprocessor control • Operation via touchscreen, text display optionally in various languages • Screen holder from the side • Pneumatic screen clamping • Double indexing and ½ indexing • Control panel on each printing arm • Registration accuracy 0.025 mm • Adjustable cycle speed Pjdpsztqy Sjfx Ahcora • Gap setting Optionally, a Rutcure Master 18 drying tunnel can also be purchased, with a chamber length of 260 cm, belt width of 105 cm, and 18 kW, manufactured in 2007. Price: 2,300 euros (negotiable).

Condition: good (used), Are you interested in this product or would you like more information? Please feel free to contact us. Predpfx Aozr Iizshcsa Additional photos can be provided upon request. The price is negotiable. For more parts and other materials, please also visit our website, CNC-Service. Do you have any questions or are you looking for something specific? Please feel free to contact us!

Year of construction: 2016, condition: excellent (used), functionality: fully functional, We offer this Apollo SRL Macchine Utensili Modular 1 vertical head punching machine, type MB045161215, manufactured in 2016, in very good condition. Psdpfszrpfkex Ahcsra If you have any questions or require further information, please contact us by email or phone.

Year of construction: 1999, condition: ready for operation (used), Max. bar length: 1400mm, bar diameter: 6.35-80mm, weight: 450kg, accessories: cabling, servo amp, bar pusher 52D=12, bar pusher 52D=15, bar pusher 52D=21, with delivery note, copy of the invoice, various manuals, operating and maintenance instructions. An on-site inspection is possible. Prsdszrn Htepfx Ahcoa

Condition: good (used), Min. Pipe length: 100-1800 mm Prjdpeq U Rccefx Ahcea The system was previously used for deburring cut pipes!

Condition: like new (used), functionality: fully functional, power: 17.5 kW (23.79 HP), gearing type: hydrostat, fuel type: diesel, fuel tank capacity: 40 l, color: green, overall weight: 5,600 kg, maximum load weight: 3,830 kg, lifting height: 20,700 mm, drive condition: 95 %, number of seats: 1, emission class: euro5, Year of construction: 2024, operating hours: 121 h, Equipment: additional headlights, adjustable boom, crane, low noise, tilting carriage, === KEY SPECIFICATIONS === Year: 2024 Working hours: 121 h Max. lifting capacity: 3,830 kg Max. lifting height: 16.8 m (20.7 m with fly jib) Max. working radius: 16 m Drive: Diesel Remote control: Yes Jib: Optional (fly jib available) Attachments / extras: Hook block, searcher hook (optional) Track type: Rubber tracks Track condition: Good Operating weight: 5,600 kg CE certified: Yes === HIGHLIGHTS === Carefully selected machine with verifiable history CE certified with full documentation available Ready for immediate use and transport Equipped with remote control for precise operation Advanced safety systems for safe and efficient work Compact spider crane – ideal for restricted access areas === CONDITION === Excellent working condition – fully inspected, serviced, and tested All functions operate correctly Inspection available upon request === LOCATION & PRICE === Located in Sittard, Netherlands Worldwide delivery available Price €127,500 (EXW / excl. VAT) === DESCRIPTION === Prsdpfx Ahjyvrt Uscoa Reliable Maeda MC405C-3 spider crane from 2024 with only 121 working hours. This compact mini crane combines high lifting performance with excellent maneuverability, making it ideal for indoor applications, construction sites, glass installation, and confined spaces. With a maximum lifting height of up to 20.7 meters (with fly jib) and a lifting capacity of 3.8 tons, this machine delivers strong performance within a compact footprint. Fully inspected, CE certified, and ready for immediate deployment. === DELIVERY === Crane loading available upon request Flexible shipping options tailored to your destination Transport handled by Collé Rental & Sales

Condition: used, axle configuration: 1 axle, first registration: 02/1999, suspension: air, tire size: 275/70R22,5, color: other, Year of construction: 1999, Equipment: ABS, tail-lift, = Additional Options and Accessories = - Tail lift = Remarks = Number of axles: 1, Unladen weight: 9,480 kg, Gross weight: 22,000 kg, Chassis type: Full chassis, Chassis material: Steel, Kingpin size: 2 inch, Suspension type: Air suspension, ABS, Body build year: 1999, Refrigeration unit manufacturer: Carrier, Refrigeration unit model: Maxima2, Refrigeration unit: Diesel/electric, Operating hours / electric: 1,678, Operating hours / diesel: 9,338, Type of cooling: Chilling, Axle type: ROR, Tail lift, Tail lift design: Rear platform, Tail lift capacity: 1,500 kg, Tail lift material: Steel, Battery for ramp = Further Information = General Information Cab: Day cab Licence plate: KLEYN1 Drivetrain Fuel type: Diesel Transmission Gearbox: Manual gearbox Axle Configuration Tyre size: 275/70R22.5 Brakes: Drum brakes Suspension: Air suspension Axle 1: Twin tyres; Tyre tread left inside: 14 mm; Tyre tread left outside: 14 mm; Tyre tread right inside: 14 mm; Tyre tread right outside: 14 mm Weights Unladen weight: 9,480 kg Payload: 12,520 kg Gross vehicle weight (GVW): 22,000 kg Functional Tail lift: Rear platform, 1,500 kg Refrigeration unit: Diesel and electric (9,338 operating hours diesel; 1,678 electric) Environment Emission class: Euro 0 Condition General condition: Fair Technical condition: Fair Optical condition: Fair Damages: None = Company Information = Kleyn Trucks is one of the world’s largest independent dealers of used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our range covers all European brands, years of manufacture, and price categories. Why buy from Kleyn Trucks? Easy! • Large and fast-changing stock • Recognizable quality • Good prices • Fair business practice • We speak many languages • We understand our customers • Support with import and transport Predpfxsxzy Tds Ahcja • (Export) registration plates arranged quickly • Expert technical services • The certainty of “recognizable quality” • And more…. Please visit our website for special offers and complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit an inquiry via our website. Ask directly about our European warranty package.

Condition: used, Year of construction: 2007, DOALL TYPE: C4100 NC AUTOMATIC FEED YEAR: 2007 Pjdpjw U N I Eofx Ahcsra

Condition: used, Year of construction: 2012, 2012 | Nissan Cabstar France Elevateur Topy 100-1 | Used Truck-Mounted Boom Lift | 80618 kms 📍Location: Germany 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 15000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 50 inspection points 49 approved ✅ 1 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: The truck drives well, shifts well, good condition, auxiliary frame galvanized no rust. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "41123 Equippo" is commonly used when looking up more details online. Prodpfxezl E Dcs Ahcsa 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: reconditioned (used), Tenoning spindle 1 St Number of milling agregates 4 St. Spindle diameter 50 mm Control Weinig, PC-Nexus Weinig Unicontrol 10 CNC - Spindles radially and axially CNC-controlled ----- The machine was factory overhauled by Weinig in 2024. The control panel was also upgraded to a Siemens S 7 677 C, with a new membrane panel "Touch". With the following machining units: Crosscut saw ----- with laser alignment light, motor power 3 kW, spindle diameter 40 mm, spindle speed 3,000 Prodoxpi Duspfx Ahcsa Axially adjustable via NC axis Radial pneumatic adjustment to 8 positions for edge rounding from above Unit from below for edge rounding ----- Axially adjustable with crosscut saw Tenon and slotting spindle ----- Motor power 15 kW Spindle diameter 50 mm Spindle speed 2,925 rpm Tool travel radius min. 380, max. 400 mm Tool clamping length 640 mm Axially adjustable CNC axis Axially adjustable travel 580 mm Adjustment speed 100 mm/sec. 1. Profile spindle (up- and down-rotation) ----- Motor power 11 kW Spindle diameter 50 mm Spindle speed 6,000 rpm Tool clamping length 400 mm with counter bearing Axially and radially adjustable via CNC axis 2. Profile spindle ----- Motor power 11 kW Spindle diameter 50 mm Spindle speed 6,000 rpm Tool clamping length 400 mm with counter bearing Axially and radially adjustable via CNC axis Profile milling unit horizontally mounted on top ----- Motor power 3 kW Spindle diameter 40 mm Spindle speed 9,000 rpm Pneumatically adjustable to 8 axial and radial positions Profile milling unit vertically mounted on the right side Machine end ----- Motor power 3 kW Spindle diameter 40 mm Spindle speed 5,850 rpm Pneumatic adjustment to 8 axial and radial positions Additional accessories ----- CNC-controlled length stop, mounted on the slotting table for lengths up to 3,500 mm, including a positioned cross-cutting saw integrated into the control system. Studio window device, pivots 60° on both sides Double-part package with automatic separation and transfer Synchronization device with automatic window rebating Rebating carriage for rebating small sash widths Air conditioning unit in the control cabinet PC control NEXUS Automatic turning system Slat conveyor, including conveyor belt for returning the workpieces to the operator (Technical specifications according to the manufacturer - without guarantee).

Condition: new, Year of construction: 2026, Technical data Swing over bed 360 mm Swing over cross slide 150 mm Maximum turning length 750 mm Spindle speed 100–2000 rpm Spindle bore Ø 51 mm Spindle taper A2-6 Tailstock spindle taper MT5 Number of tools in the holder 8 Tools size 20×20 Tailstock spindle feed 100 mm Main motor power 3.7 kW Dimensions 1815×1300×1600 mm Weight 1300 kg Available equipment SINUMERIK 808D control system in Polish and English SIEMENS servomotors 1 live tool 3-jaw hydraulic chuck 8-position turret head soft jaw kit hydraulic tailstock cooling system automatic gear and guide lubrication system 24V halogen lighting Polish and English manuals EC declaration Predpfx Ahoizw E Aecea The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Year of construction: 1991, condition: used, max. wheel diameter 400 mm max. number of teeth 150 max. module 5 total power requirement 16 kW weight of the machine ca. 10 t Workpiece Ø, min./max. 30 - 400 mm Number of teeth 6 - 150 Module range, max. 5 Tool holder shaft Ø SK 30 / 20 Tool speeds 4,000 rpm Spindle drive max. infinitely variable 1.8 kW Feeds, longitudinal and cross 0.001 - 12 m/min Workpiece speed, max. (1.5 kW) C Axis 2,000 rpm Workspindle slide 400 mm Tool speed, max. 3,000 rpm Tool holder SK 30 Predpfst Hwylox Ahcea Total electrical load, approx. 16 kW - 380 V - 50 Hz Weight, approx. 10,000 kg Accessories / Special Features * BWO (HECKLER & KOCH) CNC Control model 785 H for altogether 7 axes. Input via monitor. The control has all the supervision and fault diagnosis features necessary for fully automatic working process. * 2 workspindle units, left and right, which can be set at any angle. * CNC controlled: Z and W Axes for tool cross slide. X and U Axes for tool longitudinal slide. * L and O Axes for milling spindle. C Axis for workspindle rotation. * Manually controlled: Tool slide rotary table (B and E Axes). Tool slide vertical infeed (V and Y Axes). Tilt of tool head (A and D Axes). All axes have digital display in the control. * Hydraulically operated workpiece clamping device in conjunction with an automatic loading device using workpiece feed / conveyor belt and swivelling loading device, as well workpiece control by air. * Coolant equipment with chip conveyor. * Noise protection cabin. * Central lubrication. * Built-on hydraulic unit. * Pneumatically driven safety doors. * Deburring device, etc. The machine uses the hypocycloidal milling principal, with electronically synchronized tool and workpiece axes for working straight roof-formed teeth, symmetric as well as asymmetric forms. Advantages are high precision and productivity. Condition : Good to very good. Machine can soon be inspected under power. Delivery : Ex stock, as inspected Payment : Net, after conclusion of contract Thank you for your interest. We always have a good selection of gear machines available on stock.

Condition: used, Year of construction: 1978, spindle diameter 105 mm Predet Hwtxspfx Ahcsa x-travel 1250 mm y-travel 1000 mm z-travel 600 mm table length 1100 mm table width 900 mm tool adaptor 50 ISO / MK total power requirement kW weight of the machine ca. t CNC Table Borer, Reconditioned 2002, BOSCH CC 300

Year of construction: 1991, condition: used, max. wheel diameter 0 mm Prjdst Hwv Hopfx Ahcea max. number of teeth 0 max. module min. module total power requirement kW weight of the machine ca. t dimensions of the machine ca. m CNC controlled milling machine for synchronous rings

Condition: used, Year of construction: 2004, Tenoning spindle 2 St. Number of milling agregates 7 St. Spindle diameter 50 mm Control Weinig PC-Nexus Weinig Unicontrol 12 CNC ----- Sale on behalf of a customer. Machine connected and ready for demonstration. Including used window tools for Unicontrol 12, OERTLI for various wood thicknesses ----- Brief Summary: ----- - 2 x tenoning spindles each 640 mm length, CNC controlled - "Vario-Table" - 3 x profile spindles each 400 mm length, CNC controlled - FItting spindle + grooving units (top and bottom) - Includes used window tools for Unicontrol 12, OERTLI programmed and set up for various wood thicknesses and systems (see pdf attached). Detailed Description: ----- crosscut saw ----- Crosscut saw electronically, horizontally infinitely adjustable Number of tools: 1 pc. Spindle speed: 3000-6000 rpm Spindle diameter: 40mm Pjdpsyyqm Iofx Ahcora Tool diameter max.: 400 mm Motor power: 3 kW Laser guide light to identify the saw section rounding aggregate ----- Position: horizontally below Motor power: 1 kW Spindle diameter: 20mm Spindle speed: 9000 rpm Tool flight circle max.: 130 mm electronic length stop, length: 3500 mm ----- 1. tenoning Spindle ----- Number of tools: variable, CNC-controlled Tool clamping length: 640 mm Vertical spindle stroke: variable, CNC-controlled Spindle speed: 2800-4000 rpm Spindle diameter: 50mm Tool diameter max.: 380 mm Motor power: 15 kW 2. Tap and Slot Spindle ----- Number of tools: variable, CNC-controlled Tool clamping length: 640 mm Vertical spindle stroke: variable, CNC-controlled Spindle speed: 2800-4000 rpm Spindle diameter: 50mm Tool diameter max.: 380 mm Motor power: 15 kW 1. Profiling spindle ----- Position: vertical right Number of tools: variable, CNC-controlled Tool clamping length: 400 mm with upper bearing Vertical spindle stroke: variable, CNC-controlled Horizontal spindle stroke: variable, CNC-controlled Spindle speed: 6000 rpm Spindle diameter: 50mm Tool flight circle max.: 232 mm Motor power: 11 kW 2. Profiling spindle ----- Position: vertical right Number of tools: variable, CNC-controlled Tool clamping length: 400 mm with upper bearing Vertical spindle stroke: variable, CNC-controlled Horizontal spindle stroke: variable, CNC-controlled Spindle speed: 6000 rpm Spindle diameter: 50mm Tool flight circle max.: 232 mm Motor power: 11 kW 3. Profiling spindle ----- Position: horizontally above Tool clamping length: 40 mm Spindle speed: 9000 rpm Spindle diameter: 40mm Tool flight circle max.: 130 mm Motor power: 3.7 kW 4. Profiling spindle ----- Position: vertical right Number of tools: variable, CNC-controlled Tool clamping length: 400 mm with upper bearing Vertical spindle stroke: variable,...

Condition: used, Tenoning spindle 2 Stk. Number of milling agregates 5 St. Spindle diameter 50 mm Control Weinig, PC-Nexus Weinig Unicontrol 10 NC Window System — Optional: Extensive Tooling Set ----- Optionally available (at an additional cost): IV 68 Wood, Wood/Aluminum IV 78 Wood, Wood/Aluminum IV 68 Entrance Doors Manufacturer's Technical Description: ----- Item 1: Weinig Unicontrol 10 NC Window System ----- Cross-cut Saw ----- with laser alignment light; motor power: 3 kW; spindle diameter: 40 mm; spindle speed: electronically variable (with brake) from 3,000 to 6,000 rpm. Max. tool cutting circle: 400 mm Axial adjustment: 150 mm via NC axis Radial adjustment: pneumatic, to 8 positions for top edge rounding Horizontal bottom rounding unit ----- Axial adjustment travel: mechanically coupled with cut-off saw 1st Tenoning and Slotting Spindle ----- Motor power (with brake): 15 kW Spindle diameter: 50 mm Spindle speed: 2,925 rpm Max. tool cutting circle: 400 mm Tool clamping length: 640 mm Axial adjustment travel: NC axis Home position (below table): 5–10 mm Radial adjustment travel: fixed 2nd Tenoning and Slotting Spindle ----- Motor power (with brake): 11 kW Spindle diameter: 50 mm Spindle speed: 2,925 rpm Max. tool cutting circle: 400 mm Tool clamping length: 320 mm Axial adjustment travel: NC axis Radial adjustment travel: NC axis Home position (below table): 5–10 mm 1st Profiling Spindle (Climb and Conventional Milling) ----- Motor power (with brake): 11 kW Spindle diameter: 50 mm Spindle speed: 6,000 rpm Tool cutting circle: 140 mm Max. tool diameter: 232 mm Tool clamping length: 400 mm (with outboard bearing) Axial adjustment travel: 350 mm (NC axis) Radial adjustment travel: NC axis Home position (below table): 5–10 mm 2nd Profiling Spindle ----- Motor power: 11 kW Spindle diameter: 50 mm Spindle speed: 6,000 rpm Tool cutting circle: 140 mm Max. tool diameter: 232 mm Tool clamping length: 400 mm (with outboard bearing) Axial adjustment travel: 350 mm (NC axis) Radial adjustment travel: NC axis Home position (below table): 5–10 mm Horizontal Profiling Unit (Top) ----- Motor power (with brake): 3.0 kW Spindle diameter: 40 mm Psdozawizspfx Ahcjra Clamping length: 40 mm Spindle speed: 5,850 rpm Max. tool cutting circle: 130 mm Pneumatic adjustment: 8 positions (axial and radial) 3rd Profiling Spindle ----- Motor power: 11 kW Spindle diameter: 50 mm Spindle speed: 6,000 rpm Tool cutting circle: 140 mm Max. tool diameter: 232 mm Tool clamping length: 400 mm (with outboard bearing) Axial adjustment travel: 350 mm (NC axis) Radial adjustment travel: NC axis Home position (below table): 5–10 mm Vertical Profiling Unit (Right, at Machine End) ----- Motor power (with brake): 3.0 kW Spindle diameter: 40 mm Clamping length: 160 ...

Condition: used, Univ. universal milling machine with active digital display, DECKEL Type FP 1 Machine No. 2101 - 7088, Year of manufacture 1993 Travel distances X: 300 mm, Y: 150 mm, Z: 330 mm Table size 600 x 200 mm Spindle mounting SK 40 - S20x2 Spindle speed 40-2000 rpm, 16 steps Predpfx Asziny Ijhcea Feed rate X and Y axis 5 to 500 mm/min. Rapid traverse 1200 mm/min. Motor power 1.6 and 2 kW, pole-changing Power connection 380 Volt, 50 Hz - Active control and digital display for 3 axes, HEIDENHAIN Type TNC 123 - Stepless feed rate via servo motor in the X, Y, and Z axes - Spindle speed via 2 motor speeds and 8 gear stages - Quill travel on the vertical milling head 60 mm - Vertical milling head swiveling and horizontally extendable by 100 mm - Swivel, rotary, and tilting angle table DECKEL, Type 2114 - Coolant system in the machine base - Central lubrication - Adjacent control cabinet - Hinged protective shield with safety switch - Original chip tray for mounting on the machine base - Electrical diagram available Space requirement L x W x H 1600 x 1200 x 1770 mm Weight 900 kg Good condition

Condition: refurbished (used), operating hours: 35,498 h, functionality: fully functional, DEMAG D325 – 1590 NC III Year of manufacture: 1991 Control system: NCIII Screw diameter: 70 mm Injection volume: 960 cm³ / 860 g (70 mm) Clamping force: 3250 kN Tie-bar spacing: 630 mm x 630 mm Minimum mould height: 330 mm – 770 mm Mould opening stroke: 600 mm Ejector stroke: 200 mm Core pull: 2 circuits Pneumatic valve: 1x Robot interface Equipment: Core pull, 2-circuit / Robot interface, 2-circuit Pneumatic valve 5/2 No.1 on moving platen Pneumatic valve 5/2 No.2 on moving platen Clamping force controlled Handling interface, Euromap 12 (32-pin) robot interface Mould protection interface (ejector plate safety) Integrated hot runner control, 12 zones Mould protection Podezma Avspfx Ahcsra Plug combination for electrical connection

Condition: used, CNC control, control panel, control panel, control unit, card slot, control cards, MC3 control, plug-in cards, circuit boards, valve module, valve amplifier, circuit card, analog distribution card, distribution board card, valve amplifier, bus print, bus board, processor card, coupling card, temperature control card Prodpfx Ahen Hbc Iocea -Manufacturer: Mannesmann Demag, control electronic modules from injection molding machine D 100-275 NC -Card holder: Murrelektronik 630055 -Control card: Philips 9404 780 020 -Individual components: see photos -Price/sale: complete -Total dimensions: 315/140/H215 mm -Weight: 1.4 kg

Condition: good (used), CNC control, control panel, control desk, operating unit, card slot, control cards, MC3 control, plug-in cards, printed circuit boards, valve module, valve amplifier, printed circuit board, analog distribution card, distribution print card, valve amplifier, bus print, bus board, processor card, coupling card, temperature control card Predpfxjn H Etfs Ahcja -Manufacturer: Siemens, control electronic modules from injection molding machine Demag D 100-275 NC -Power supply: Type E220 G5/15WRGD -Adapter capsule: Type 6ES5 491-0LB11 5 pieces -Interface modules: 6ES5 306-7LA11 -Subrack: 6ES5 700-2LA11 -Individual components: see photos -Price/Sale: complete -Dimensions total: 485/220/H305 mm -Weight: 12.3 kg