Used Massivit Massivit 1800 for sale (1,992)

Condition: used, CTS Type: T-70/600/S Water-cooled temperature testing chamber Control: - 32-bit controller - LCD control panel - Digital display of setpoint and actual values - Numerical input of setpoints - Error messages in plain text - RS 232 interface - Free switching channels for external control of the test item Technical performance data Temperature tests: Temperature range -70 °C to +180 °C Temperature deviation ±0.1 to ±0.3 K over time Temperature change rate according to IEC 60068-3-5 Heating 2.5 K/min Cooling 2.5 K/min Heat radiation approx. 2500 W at +20°C Knodpfjzg Ty Ijx Anusc approx. 2500 W at +0°C approx. 1800 W at -40°C The technical data refer to an ambient temperature of +25 °C, rated voltage 400V, without test item, without radiation, and without additional equipment. Dimensions: Test volume 600 liters Test chamber dimensions height, approx. 850 mm, width, approx. 850 mm, depth, approx. 830 mm External dimensions height, approx. 1900 mm, width, approx. 1120 mm, depth, approx. 1875 mm Operating data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Rated power 8.8 kW Rated current 14.8 A Protection class IP 22 Refrigerant: R404A / R23 Weight approx. 700 kg For your safety as a buyer, please note the following information! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by telephone.

Condition: used, operating hours: 500 h, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, Turn fine-grained biomass into uniform pellets with a complete pelletizing system: pellet press, material bunker, drum sieve with conveyor belt and big-bag handling, all from one manufacturer. This EcoKraft RP22 system is built around the second-generation RP22 press, developed for fine-grained biomass. It has built-in steam extraction from the pressing chamber and two central lubrication points, which keeps it compact and easy to operate. Only one system available. This is a single used system, not ongoing stock. Once sold, it is gone. Pickup and transport slots are limited (press alone: 650 kg). Knedpfxoz Rwime Anuec Best for: pelletizing fine-grained biomass (for example fertiliser, wood or plant-fibre mixes) indoors, protected from the weather, with 400 V three-phase power. Not suitable for: outdoor use, unattended operation, or explosion-risk areas (no explosion protection is included as standard). What the equipment means in practice: RP22 GEN2 press, max. 22 kW: powerful press for fine material, with steam extraction from the pressing chamber Bunker 1 m³ with screw discharge and level sensor: the sensor sends a start/stop signal that controls filling of the press Vibration pads on compressed air: help prevent material bridging in the bunker Drum sieve with conveyor belt: screens out fines and collects them in a big bag Complete package (as supplied by EcoKraft AG): • Pellet press RP22 with automatic central lubrication • Pneumatic grease system for 18 kg buckets with 18 kg food-grade grease bucket • Digital water dosing pump 54 l/h • Die 6x20 mm, 45° pre-compression • Material bunker 1 m³ with screw discharge, level sensor and vibration pads • Drum sieve with conveyor belt 6mm sive + 4 mm sive • Big-bag racks: 1x Vario 1.0 and 3x Vario 1.5 (stackable) • Big bags: 1x 90x90x110 cm and 5x 95x95x150 cm Technical data: Press: 1.70 x 0.80 x 1.70 m, 650 kg, max. 22 kW, 63 A CEE plug (50 A upstream fuse required), customs tariff no. 84793010 Drum sieve: Ø300 x 1200 mm, height adjustable, side feed left or right, max. discharge height 1800 mm Conveyor: length 3600 mm, discharge height 2600 mm, belt width 150 mm, 49 cleats, 0.75 kW Manufacturer: EcoKraft AG, Germany, with manufacturer CE declaration Condition: used. Bought second hand in like-new condition, then used by us for approx. 500 operating hours. The bunker is a demo unit with light signs of use. Location: 6064 Kerns (self pick-up, transport by arrangement). Price: EUR 70,000. Why you can buy with confidence: approx. 500 operating hours in our own use, complete scope as listed, manufacturer documentation available, in-person inspection in Kerns by appointment. Inspect and test before you buy: you may verify identity, condition, completeness and operation at inspection or pickup. We guarantee what we control: the system is what this listing says it is, complete and functional when you see it. We do not promise throughput or pellet quality for your material, which is why we ask about your application first. Speed bonus: buy by October 27, 2026 and receive EUR 2,000 off, so EUR 68,000 instead of EUR 70,000. Valid until October 27, 2026, or until the system is sold. Action: send us your material, required capacity and destination. We will confirm suitability and provide a transport estimate.

Condition: like new (used), Year of construction: 2010, I sell the radial arm crosscut saw STROMAB RSP 750. Cutting length 750mm Cutting height max. 255mm Tilting heads 0 + - 45° in all directions X - Y - Z Kodpfx Asz Su Hlenusnc Pneumatic cutting stroke on push buttons 1 pc pneumatic material pressure Motor 4,0kW (5,5 HP) Working table 1800 x 1100 mm Total weight 300kg. Condition like new. Available immediately.

Condition: new, machine/vehicle number: 2642110, fuel type: diesel, motor manufacturer: Volvo TAD882GE-SV, General information Year of manufacture: 2026 Field of application: Construction Weights Empty weight: 3.840 kg Functional Generator capacity: 275 kVA Dimensions of cargo space: 424 x 120 x 230 cm CE mark: yes Other information Fuel consumption: 39.5 Liter per hour at 75% Load Generator: Stamford UCDI274K1 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Emission level: Stage V / Tier IV final Water tank volume: 1800 l Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank = Remarks = The images shown, including components such as the control panel, circuit breaker, coolant heater etc. may differ from the actual units that are available for sale. This is due to the availability of various enclosures, components and frames Stage V Generator Stage V Aggregaat Stage 5 Generator Stage 5 Genset Stage V Gen set Stage V Generator set EU Stage V Generator StageV Knjdoxbwxqopfx Anujc

Condition: new, Year of construction: 2023, functionality: fully functional, power: 5.5 kW (7.48 HP), Continuous power: 5500 watts - 400V Continuous power: 1800 watts - 230V Powermate OHV - Gasoline Manual start + Electric start Fuel tank capacity: 26.0 liters Socket panel: 2 x Schuko 1 x CEE 400V 16A Weight: approx. 90 kg Dimensions in mm: 800x698x620 Wheel set with handles Digital multimeter AVR regulation, oil level sensor Knodpfx Anez Stbueuoc

Condition: new, Year of construction: 2025, Manufacturer: Hiwell Model: SJJ600-V Year: 2025 Condition: New Serial number: 0362514 Stock number: 3445 Belt width: 600 mm Knodpfoz I Txdox Anusc Pump: Gedong SCP-10418 diaphragm pump Power: 3 x 380V, 50Hz, 2.45kW Dimensions: 1800 x 1150 x 1350 mm Weight: 300 kg Protein skimmer with a variable and adjustable belt speed. New, never used.

Condition: new, axle configuration: 2 axles, color: red, With us, you will find a wide range of Beco tippers. We supply new and used tippers in various models and sizes, including Maxxim, Super, and Magna. Agricultural tippers, earth dumpers, hooklift carriers, and special-purpose tippers are available. Beco tippers are robust trailers designed for agricultural use, featuring a reinforced construction and heavy-duty chassis. They are towed by tractors and used for transporting harvested crops to processing facilities. The open loading body can be tilted using a hydraulic system, allowing the load to be tipped and discharged. In addition to crops, tippers or earth dumpers can be used to transport and unload bulk materials such as gravel, sand, soil, or rubble. At Aantjes Goudriaan, we certainly have a Beco tipper for sale that matches your harvested crop volume or soil transport needs. For example, we offer a Beco tipper with a 12-ton payload capacity and a hydraulic tailgate. Our Beco tippers are also available with other payload capacities, constructions, and different chassis variants. From a Beco Maxxim 220 and Maxxim 260 to a Beco Super 1800, you will find what you need at Aantjes Goudriaan. Beco stands for quality Beco understands better than anyone how important a reliable tipper is for ensuring a smooth logistical operation. Their products are designed with this in mind. For over forty years, they have been manufacturing tippers used daily by farmers. Beco tippers at Aantjes Goudriaan You can buy both new and used Beco tippers at Aantjes Goudriaan. We inspect all tippers and test them to ensure everything works properly. We make sure you know exactly what to expect when purchasing a Beco tipper. Are you curious to see what else we can offer, or do you want more information about our tippers? Contact us for more information. Condition: New Knjdpfjz S Dxwox Anusc

Condition: used, Year of construction: 2000, Technical details: turning diameter: 800 mm turning length: 2965 mm max. turning dia. over saddle: 520 mm spindle bore: 92 mm turning speed range: 3 - 1800 U/min spindle head: Größe 11 total power requirement: 37 kW weight of the machine ca.: 6,5 t dimensions of the machine ca.: 5,2 x 2,2 x 1,9 m Kedpfxjxxig Uo Anuonc Teach In Control MTC-K 3-jaw chuck ROTAS Dia. 400 mm face plate RÖHM Dia. 630 mm 4-station toolholder system PARAT 1 fixed steady coolant attachment and chip conveyor *

Condition: excellent (used), Calibration and fine sanding machine with 1 sanding unit 1 motor, processing from above Working width 1000 mm Sanding belt dimensions 2200 x 1030 mm Workpiece dimensions 3 - 170 mm Table height adjustment motor 0.18 kW, 400 V, 50 Hz Main motor 7.5 kW, 400 V, 50 Hz 2 feed speeds 5.5 & 11 m/min 1st unit: Combination unit, sanding drum, rubberized, 90 Sh / pneumatic sanding pad Sanding pad NEW 2nd unit: Cleaning brush Compressed air requirement approx. 6 bar Suction diameter 200 mm Dimensions approx. L x W x H = 1385 x 1980 x 1900 mm Weight approx. 1800 kg Automatic workpiece thickness adjustment with digital display Oscillation of the sanding belt Sanding belt emergency stop with disk brakes Table extension with 3 rollers in the outfeed Emergency stop button Main switch TRANSPORT CARPET LIKE NEW - was replaced by us approx. 3 years ago MORE THAN 30 WIDE BELT SANDERS Note used machines: - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! Kjdpfx Aneudxchousnc - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).

Condition: used, Year of construction: 2009, functionality: fully functional, machine/vehicle number: 20082, type of input current: three-phase, total width: 2,000 mm, total length: 6,700 mm, input voltage: 400 V, input current: 10 A, 32 C – GERBER XLS-125-180-L Automatic Fabric Spreader – Industrial Spreading System Description For sale is a GERBER XLS-125-180-L automatic fabric spreading machine designed for high-volume textile and garment production. This industrial spreading system enables precise and efficient multi-layer fabric spreading directly onto a conveyor table. The motorized spreading carriage ensures consistent material handling, alignment, and production speed, making it suitable for demanding production environments. The machine is known as a reliable industry workhorse, capable of handling a wide range of materials from heavy denim to lightweight fabrics. The system has been operated as part of a fully integrated cutting line together with a Lectra Vectorfashion VT-FA-Q2-72 cutter (unit 35 C) and FINN-CONVEY V307 conveyor system (unit 30 C). This setup significantly improves production flow, reduces manual labor, and enables continuous high-volume operation. The machine has been used in a professional garment factory and was operational prior to factory shutdown. Recently serviced on 27.02.2026. Video available from operation (05.03.2026). The video material shows the GERBER spreading system in operation together with other cutting line equipment, including a Lectra Vectorfashion VT-FA-Q2-72 CNC cutter (unit 35 C) and a FINN-CONVEY V307 conveyor system (unit 30 C). Includes • GERBER XLS automatic spreading machine Knodpfx Anoy Alciousc • Motorized spreading carriage • Roll holder system • Integrated touchscreen control panel • Fabric alignment and feeding system • Mounted rail system for table operation Technical Details • Manufacturer: Gerber Technology • Model: XLS-125-180-L • Year: 2009 • Serial number: 20082 • Max roll weight: 125 kg • Max roll diameter: approx. 600–650 mm • Machine weight: approx. 400 kg • Spreading width: up to 1800 mm • Speed: up to approx. 100 m/min (material dependent) • Voltage: 3 x 380–415 V • Frequency: 50/60 Hz • Current: approx. 10 A Key Features • Fully automated fabric spreading for reduced manual labor • Suitable for both rolled and folded fabrics • Precision tension control to prevent fabric distortion • Accurate edge alignment for material optimization • Touchscreen interface for easy programming and control • Integrated safety systems including emergency stop and sensors Production Advantages • High precision reduces material waste • Fast spreading significantly improves cutting room throughput • Consistent tension ensures dimensional stability of cut parts • Enables efficient multi-layer cutting preparation Maintenance & Reliability Gerber spreading systems are known for strong spare part availability and long service life. Condition Used industrial condition Fully operational prior to shutdown Recently serviced (27.02.2026) Video available from operation (05.03.2026) Typical signs of use from production environment Inspection possible prior to dismantling Sold as-is, where-is, without warranty Typical Applications • Automatic fabric spreading • Multi-layer cutting preparation • Denim and heavy fabric production • High-volume garment manufacturing • Cutting room operations Location Valga, Estonia Removal & Transport Buyer responsible for dismantling and transport Professional dismantling recommended due to system size

Condition: used, mileage: 281,001 km, power: 70 kW (95.17 HP), first registration: 06/2017, fuel type: diesel, tire size: 215/65R16, axle configuration: 4x2, wheelbase: 2,930 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, number of gears: 5, emission class: euro6, number of seats: 3, total length: 4,700 mm, total width: 1,900 mm, total height: 2,080 mm, loading space length: 1,780 mm, loading space width: 1,600 mm, loading space height: 960 mm, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, power mirror, traction control, trailer coupling, = Additional Options and Accessories = - Heated mirrors - Halogen lamp - Manual - Rear view camera - Standard - Fabric - Partition = Notes = Configuration: 4x2, Payload: 1125 kg, Unladen weight: 1485 kg, Gross vehicle weight: 2610 kg, Towing capacity, unbraked: 750 kg, Towing capacity, center axle, braked: 1800 kg, Tow hitch, Type of cab: Single cab, Cruise control, Air conditioning, Number of airbags: 2, Parking assistance: Rear, Electric windows, Electric mirrors, Partition, Color: White, Heated mirrors, Rear view camera, Type of lighting: Halogen lamp, Air conditioning, Engine power: 70 kW (94 hp), Number of cylinders: 4, Engine displacement: 1560 cc, Fuel: Diesel, Euro: 6, Drive technology: Timing belt, Type of transmission: Manual, Gears: 5, Power steering, ABS, ASR, Starter battery, Side wall paneling, Roof rack: Standard, Side doors: 1, Rear closure: Double door, Central locking, Number of seats: 3, Seat arrangement: 1+2, Seat cover: Fabric, Seat adjustment: Manual, L1 Compact Export Airco Euro6 Roof rack Camera Tow bar!, Spare wheel, Tread depth of spare wheel: 7% = Additional Information = Knedpfoy Ni T Eox Anusc General Information Number of doors: 1 License plate: V-703-GV Axle Configuration Tire size: 215/65R16 Brakes: Disc brakes Suspension: Coil spring suspension Axle 1: Tire tread depth left: 5 mm; Tire tread depth right: 6 mm Axle 2: Tire tread depth left: 7 mm; Tire tread depth right: 7 mm Weights Unladen weight: 1,485 kg Payload: 1,125 kg GVW: 2,610 kg Functional Loading area height: 95 cm Condition Overall condition: average Technical condition: average Optical condition: average Damage: none Number of keys: 2

Condition: good (used), Year of construction: 2000, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, Machine Version • Work table 1200 x 600 mm with 4T-slots • Ram travel 750 mm • Drilling spindle SK 40 with tool clamping device • Stepless speed programming • Stepless quill feed via three-phase servo motor • 2 T-slots 18 mm on the machine base at the rear • 2 T-slots 18 mm on the machine base on the left • Thread cutting device • Central lubrication • Coolant system • Machine lamp • CE marking • Protective device • USB interface Dimensions and travels Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column stroke (W-axis) mm 410 Distance Spindle bottom edge - min mm 70 Table top edge max. mm 680 Distance Spindle bottom edge - min mm 970 Ground max. mm 1580 Drilling radius mm 540 - 1590 Work table height mm 900 Machining values Drilling capacity in steel St 60  40 Cast iron GG 22  50 Thread cutting Steel St 60 M 36 Cast iron GG 22 M 42 Main spindle drive Kedpsz S T A Esfx Anusnc AC motor, frequency-controlled kW 5.5 at 100 % duty cycle Speed range: min -1 15 - 2800 Torque Nm max. 250 constant from min -1 15 – 2000 Feed drives X-axis - AC - Servo motor kW 0.25 Y-axis - AC - Servo motor kW 0.25 Z-axis - AC - Servo motor kW 4.50 W-axis - AC - Servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speeds (W): m/min 3 Feed rates, stepless mm/min 5 – 2000 Accuracy Positioning accuracy X, Y axis on 1200 mm mm ± 0.075 Electrical data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat screen backlit, easily readable from all sides, 215 x 160 mm Position data: Cartesian or polar, dimensions absolute or incremental, Unit: mm or inch or in degrees Interpolation: 2 axes (X, Y) Technology database: Tool management, tool suggestions according to Machining type, material-dependent cutting data suggestions Tool management: max. 500 tools Subprogram technique: yes Machining cycles Standard software options: Programming in dialog, 38 zero point offsets, rotation and mirroring, teach-in for X, Y, Z, restart in program with selection functions for targeted start Zero point determination: Cycles to determine zero points by manually probing the workpiece for: - any clamped rectangular parts - any clamped round parts - aligning castings and forged parts - Angle detection in round parts by probing reference edges or surfaces Test graphic Graphical display of drilling patterns

Condition: used, total width: 900 mm, total length: 2,050 mm, total height: 2,100 mm, Year of manufacture: 1956 Colour: Green Empty weight: 2.400 kg - Year: 1956 - Serial number: 3706 - Drive system: Conventional - Drive system: Gear drive - Number of drills [pcs]: 4 - Power [kW]: 6 - Table type: Fixed table - Table length [mm]: 1800 - Table width [mm]: 350 - Drilling depth [mm]: 160 - Drilling capacity [mm]: 25 - Reach [mm]: 275 - Main spindle power [kW]: 6.0 - Min. spindle speed [rpm]: 180 - Max. spindle speed [rpm]: 2000 - Options: Tapping function - Transport dimensions: 2050mm x 900mm x 2100mm (l x w x h) - Transport weight [kg]: 2400kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Kodpfxoz R Dt Ee Anuenc Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: new, Aluminum format sliding carriage (anodized) with hardened steel guide rods. Kickback protection for thickness planer. Anodized parallel stop with micrometric fine adjustment. Slant adjustment of the saw blade up to 45° using a handwheel. Knsdpfxevrvcas Anusc Table opening ø190 mm with under-table suction. Milling stop 180 mm. Built-in milling spindle lock. Laying table with telescopic stop, eccentric clamp, degree grid 100% Made in EU (developed, built, quality tested) Technical data: Surface planing unit: Table width: 410 mm Table length: 1800 mm Planing shaft diameter: 100 mm Number of planing knives: 4 pieces Shaft speed: 5000 Motor output power: 5 kW S6 400V (4 kW S1) Thickness unit: Thickness passage, min/max: 4 - 230 mm Feed speed: 7 m/min Milling machine: Useful length of the spindle: 125 mm Height adjustment of the. Spindle: 160 mm Max. tool diameter when profiling: 180 mm when tenoning: 250 mm Spindle speed: 8000/6000/3500/1400 Table openings: 190 mm Integral stop: 500 mm Motor output power: 3.8 kW S6 400V (3kW S1) Circular saw: Format table: 2300 x 285 mm Saw blade diameter max/min: 315 mm/250 mm Incline position: 90° - 45° Max. cutting height: 90° 45 ° Saw blade 315: 102/72 Motor output power: 3.8 kW S6 400V (3kW S1) Weight: 900 kg Optional accessories: Reversible blade (no extra charge) Spiral planer shaft Long hole board Scoring unit

Condition: excellent (used), belt driven Flow rate 14500 m3/h Negative pressure 3091 Pa Motor power 22 kW Speed ​​2340 rpm Suction DM 500 mm Ksdpjh Tfqhofx Anujnc Outlet DM 400 x 500 mm Dimensions L x W x H = 1800 x 1300 x 1250 mm Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: excellent (used), functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 230 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 1,800 rpm, spindle speed (min.): 40 rpm, Universal milling machine, CME model FU1S, table size 1100mm x 240mm, longitudinal travel 800mm, transverse travel (Y-axis) 230mm, vertical travel (Z-axis) 400mm, with ram, Huron-type spindle with ISO 40 mount, spindle speeds from 40-1800 rpm, total power 3.75 kW, with steady rest and arbor, with digital readouts, with new mechanical vise, 160mm wide, manufactured in 1992, original paint. Knedpfsz Tc Itsx Anuoc

Condition: used, Year of construction: 1997, operating hours: 13,410 h, load capacity: 1,600 kg, lifting height: 4,310 mm, free lift: 1,405 mm, fuel type: electric, mast type: triplex, battery capacity: 1,000 Ah, battery voltage: 24 V, fork carriage width: 1,000 mm, fork length: 1,100 mm, overall weight: 3,000 kg, total height: 2,000 mm, total length: 3,000 mm, total width: 1,050 mm, No. 04537 Electric front forklift Steinbock Boss LE 16-100 MK V A-1 Used, year of manufacture 1997 Approx. 13,410 operating hours Rated load capacity 1600 kg at a 500 mm load center distance Triplex lift mast Lifting height 4310 mm Free lift 1405 mm Hydraulic mast tilt Fork length 1100 mm Fork carriage width approx. 1000 mm Fork adjustment manually adjustable Superelastic tires (SE) Power steering Electric drive, infinitely adjustable Direction switch on the steering column Driver protection roof Driver's seat with seat belt Rearview mirror Headlights Emergency stop switch Battery data according to nameplate: 24 V / 1000 Ah Including automatic charger miditron B, 24 V / 200 A Vehicle length without forks approx. 1800 mm Knedpfxoz S U S Uj Anuec Transport dimensions approx. 3000 x 1050 x 2000 mm LWH Weight approx. 3000 kg To avoid any possible misunderstandings, an on-site inspection is possible and recommended after prior appointment Sale is made in the current condition Technical data, condition description, year of manufacture and scope of delivery according to the manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, all warranties are excluded; the condition "sold as seen" applies Payment terms: Prices plus statutory VAT, payment before collection or dispatch Delivery terms: ex warehouse

Condition: excellent (used), Year of construction: 2008, operating hours: 282 h, Calibration and finishing machine, wide belt sanding machine with electronic segmented sanding pad and finish sanding Ideal sanding machine for interior construction companies, also suitable for intermediate sanding of coated surfaces. Bookbinding machine with combined unit and electronic articulated pressure bar, edge segments can be switched on and off Segment width of the pressure bar 35mm Contact roller can be pneumatically adjusted, low wear due to corrugated steel roller Grain compensation Drive motor 7.5kW with automatic motor brake, stepless belt speed controlled by frequency inverter from 2 - 18 m/s Belt feed steplessly adjustable via frequency inverter from 2.5 - 13m/min Pneumatic workpiece-controlled belt blowing device Cleaning brush at the outlet Constant working height 900mm by adjusting the upper part of the machine, thus also integrable into sanding lines Feed belt still has good grip and is in very good condition Knodozqvmrepfx Anusc Maximum sanding width approx. 1340mm Workpiece height approx. 3 to 150mm Common sanding belt dimension 1360 x 1900mm 3 rubberized pressure rollers Infeed roller table and foldable outlet table Preparation for vacuum blower. The belt is perforated and plugs for optional blower are available. Alternatively, the belt can also be connected to the extraction system. Extraction connection 1 x 200mm, 1 x 140mm and 2 x 100mm Terminal control with 50 programmable sanding programs for automated machine control. Parameters: Belt speed, feed speed, workpiece height, pressure bar engagement points at the front and rear as well as edge segments, belt blowing nozzle, optional vacuum blower, pneumatic adjustment of the calibration roller CE marking Operating manual without the illustrated connection cable Original paint, only touched up in places Approx. 282 operating hours, i.e. approx. 20 minutes per week. Dimensions approx. 1800 (with table 2600) x 2050 x 2150mm (LxWxH). Weight approx. 2400kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration and are in our warehouse, see "other offers from this provider".

Condition: good (used), Year of construction: 2014, functionality: fully functional, power: 22 kW (29.91 HP), planing width: 400 mm, rotational speed (min.): 2,940 rpm, overall weight: 1,800 kg, Equipment: CE marking, Calibrating Milling Machine / Planer for Parquet Manufacturer: Ledinek Model: Rotoles 400 D-S Year of manufacture: 2014 This machine comes from a parquet production facility. Working width: 400 mm Working height: 2 - 150 mm Minimum workpiece length: approx. 150 mm Thickness rotor power: 22 kW Motor speed: 2940 rpm Feed continuously variable: approx. 10 - 45 m/min., motor approx. 3 kW Number of reversible blades: 48 pcs Maximum chip removal: approx. 8 mm Total connected load: approx. 26 kW Electrical voltage: 3x 400 V, 50 Hz Compressed air: 6 bar Dimensions: approx. 2000 x 1300 x 2000 mm (LxWxH) Knedpfozyx E Aex Anujc Weight: approx. 1800 kg

Condition: used, Bosch Diffusion Welding Machine The system described here was designed for the following application: Diffusion welding machine for manufacturing the connection between the armature lead and the commutator for starter armatures using diffusion welding. Diffusion welding unit (also known as polymer diffusion welding unit, diffusion welding, copper soft-soldering unit, copper band welding unit), consisting of a main machine and control system, "PLC control, touchscreen operation". Process Description The workpiece carrier moves into the station and is lifted. The alignment gripper takes the armature from the workpiece carrier and aligns it to the welding position. The loading gripper takes over the armature and inserts it into the welding fixture. The welding fixture moves with the armature to the welding position. The contact and welding cylinder move together, and the first welding process begins. This process is repeated until the armature is completely welded. The welding fixture moves with the armature to the transfer position, and the unloading gripper takes over the armature and places it on the lifted workpiece carrier. The workpiece carrier is lowered. Workpiece carriers with I0 armatures continue on the belt system; I0 armatures are conveyed to the removal belt. Technical Data: Knjdpog Icfpofx Anuoc Manufacturer: Gatek Designation: Diffusion Welding Machine Energy Data: Frequency: 50 Hz Rated power: approx. 11 kW Operating voltage: 400 V / 3P Control voltage: 24 V Rated current: 20 A Fuse: 35 A Water: Inlet 4 bar, 15-23 °C approx. 25 l/min Compressed air, oil-free: min. 5 bar Temperature: 1000 °C at the tungsten electrodes Machine dimensions without control cabinet Depth: 1800 mm Width: 3100 mm Height: 2700 mm Weight: 3000 kg Year of manufacture: 2016 You can find more new and used items in our shop! International shipping costs on request!

Year of construction: 1980, condition: good (used), - Horizontal sieves - 30 filter plates - Filter area : 6 m2 - Max, operating pressure : 6 bar - Capacity : 30 - 120 hl/h - With semi-automatic cleaning Dimensions : - Length : 1800 mm - Width : 850 mm Knsdpfjmn I Nxex Anuoc - Height : 2000 mm

Condition: excellent (used), functionality: fully functional, 1x Universal milling machine Deckel FP4 NC Dialog 3 1x Universal milling machine Deckel FP4 NC Dialog 4 Kjdpfj Acd Tbox Anuenc Manufacturer: Deckel Type: FP4 Condition: used, good ----- Travel ranges: X-axis: approx. 500 mm Y-axis: approx. 400 mm Z-axis: approx. 400 mm Table clamping surface: approx. 700 x 400 mm Speed range: approx. 50 – 2500 rpm Tool holder: ISO 40 ----- Tool clamping: hydraulic Drive power: approx. 6.0 kW Feeds and rapid traverses: in all 3 axes Feed range: approx. 8 – 630 mm/min Rapid traverses: approx. 3.0 m/min ----- L x W x H: approx. 2300 x 1800 x 1800 mm Weight: approx. 1750 kg *Machine light *Spindle guard Scope of delivery: * 5x tool holders * Allmatic vise * Walter dividing head * Documentation * Spindle guard

Condition: good (used), Year of construction: 2014, functionality: fully functional, CNC-controlled lathe with driven tools, a parts handling arm, an eye for automatic tool referencing, a chip conveyor, and a material feeder. Commissioned in 11/2014 OSP-P300L CNC control system with a 15" color touchscreen Machine hours: Power-on time: 65,458 hours as of March 18, 2026, NC operating time: 36,054 hours Spindle rotation time: 19,533 hours Cutting time: 16,582 hours Continuously increasing. Power consumption: 33.1 kVA Technical data Max. swing diameter: 480 mm (approx. depending on the current design of the parts handling arm) Ksdpfo Abw U Aox Anuonc Max. machining diameter: 340 mm Max. turning length: 785 mm Collet chuck + 10" hydraulic chuck B210-A06-01, 3x soft jaws (Schunk KM-WBL 103) 1x hard jaws (Schunk SHB-J 100) Hydraulic through-bore cylinder SS 1770, draw tube Main spindle Spindle with JIS A2-6 connection, 80 mm bore, integrated motor Speed range: 45 - 5,000 min.-1 Power/continuous operation: 22 kW/15 kW Continuously controlled C-axis, 360° with 0.001° increment Sub spindle Speed range: 50 – 6,000 min-1 Power/continuous operation: 11 kW/7.5 kW Spindle with 140 mm connection, 62 mm bore, integrated motor Continuously controlled C-axis, 360° with 0.001° increment Collet chuck + 6" hydraulic chuck B206-01, 3 x set of soft jaws (Schunk KM-WBL 62) Hydraulic through-bore cylinder SS1243, draw tube Sub spindle travel – NC axis W, travel for W450: 595 mm Spring-loaded part ejector from the sub spindle Overload protection for W-axis (drive torque) Tailstock mounting in the sub spindle Turret Number of tool stations: 12, fixed and driven, BMT60 (not VDI) Tool shank diameter: 25 x 25 mm Tool shank outer diameter: 40 mm Driven tools Drive power: 7.1/4.1 kW Speed range: 45 – 6,000 min.-1 Feed rates Rapid traverse in X and Z axes: 25/30 m/min. Rapid traverse in C axis: 200 rpm Travel X-axis: 260 mm Z-axis: 510 mm Y-axis: 115 mm (+70 mm / -45 mm) Machine data Width: 3330 mm – without feeder and conveyor Depth: 1800 mm Height: 2250 mm Machine weight: 5,250 kg Accessories: OSP-P300L Advanced One Touch CF-M-E package including: Coordinate transformation function Profile generation function Advanced One Touch IGF Where N Hwxez Hk R Ue Nou 3D machining process simulation Machining time overrun control Load monitoring (spindle, feed axes) NC operation monitoring (including part count) Cycle time reduction function Hi-Cut Pro function Spindle speed control function High-pressure coolant, max. 20 bar, max. 50 l/min Material feeder ILS type MUK 7012, with bar magazine 6-70 mm/1250 mm, year of manufacture 05/2014, manufacturer Kurt Breuning – IRCO Maschinenbau GmbH, Steinenbronn. FILTERMIST FX4002 extraction system Machine equipment: Collet chuck: SMW AUTOBLOK: KSZ-DZN-065-A06 201342 (currently on the main spindle) collets diameter (mm): 6-7-8-9-10-11-12-13-14-15-16-17-18-19-20-21-22-23-24-25-26-27-28 -29-30 31-32-34-35-36-38-39-40-41-42-44-45-46-48-50-51-53-55-57-60-64-6 5 Grooved collets diameter (mm): 55-60-65 Collet chuck: SMW AUTOBLOK: KSZ-DZN-042 Z140 205073 (currently on the sub spindle) collets diameter (mm): 6-7-8-9-10-11-12-13-14-15-16-17-18-19-20-21-22-23-24-25-26-27-28 -30 31-32-34-35-36-39-38-40-41 Tool holders: Axial tool holder - 5X Turning tool holder - 5x Boring bar holder - 2X Front steady rest, double-sided - 3X Rear steady rest - 3X Reduction sleeve (manufactured from stock material) Reduction - nylon, diameter (mm): 12-14-15.5-17-20-22-24-26-28-30-31-34-36-38-40-42-44-47-50-52 The machine is regularly serviced.

Condition: used, Osai Neomark 400 Nd-YAG Laser Marking Machine The NeoMark 400 Performance system was developed for printed circuit board marking. By completely eliminating mechanical movements of the laser, extremely high-resolution markings are possible. The internal conveyor belt is designed to perform width registration for various card types up to a side length of 320 mm. The user interface consists of a console with a separate keyboard for controlling the laser source, the control systems, the marking systems, and the automation responsible for card movement via a PC. The NeoCut management software, developed based on NC², the control software of the NEO family, is a simple and intuitive interface for programming the machine and subsequent production monitoring. The Neomark is also equipped with an extraction system that can be connected to an external extractor or a central extraction system to collect the fumes and dust generated during the process. Main features: Manufacturer: Osai Type: Marking Laser GIOTTO Laser Type: Neomark Y400 Power: 500 W Voltage: 230 V Rated frequency: 50 Hz ± 2 % Knedpfx Anexbck Eeuoc Maximum electrical absorption: 4 kW Minimum flow rate for pneumatic system: 20 Nl/min Working area: up to 320 x 320 mm Laser safety class: Class 1 (EN 60825-1) Access to the working area: Front door with laser filter Loading and unloading of the printed circuit board PC with LCD monitor and keyboard Dimensions: 1200 x 1310 x 1800 mm Weight: approx. 1300 kg Laser completely rebuilt Motor of the beam expander renewed All hoses for cooling renewed More items - new and used - can be found in our shop! International shipping costs on request!

Condition: used, Iridex Type: IRIDEX OcuLight TX Iridex Laser Systems OcuLight TX IRIDEX OcuLight TX Green 2.5 W 532 nm laser system, main console including foot pedal, key, and cables. The OcuLight TX solid-state laser systems emit true green continuous-wave laser light (532 nm) for ophthalmological applications. The OcuLight TX and GLx models are also indicated for otolaryngological applications. Improper use of the laser system can result in undesirable side effects. OcuLight TX Ophthalmology: Retinal photocoagulation Laser trabeculoplasty Iridotomy Iridoplasty Otolaryngology: Stapedectomy Stapedotomy IRIDEX OcuLight TX Green 532 nm Laser Ksdpfxszd Ut Rs Anuonc Excellent efficiency with a powerful 2500 mW of laser energy provides pulse durations and pulse intervals from 10 to 3000 ms. Offers TrueCW laser pulses for maximum control and precision. Flexible range of delivery devices and a wide selection of handpieces for different surgical procedures. Optional remote control and wireless foot switch to reduce clutter and improve ergonomics and control. Quiet operation eliminates distractions. The lightweight, portable design is easily transported between treatment rooms and offices. IRIDEX OcuLight TX Green 532 nm Laser Green treatment laser: 532 nm Target laser: nominally 632 nm Cooling: On-demand whisper fan 10–3000 ms exposure duration and repetition interval Compatible with EndoProbe, LIO, OtoProbe, and SLA Power output: EndoProbe 0–2000 mW, LIO 0–2000 mW, OtoProbe 0–2500 mW, SLA 0–1800 mW Weight: 6.4 kg Length: 15 mm Width: 30 mm Height: 30 mm Condition: used Scope of supply: (See picture) (Subject to changes and errors in technical data, information provided is without guarantee!) We will be happy to answer any further questions you may have by telephone.