Used Lukas Zph 10/25 for sale (40,587)

Condition: used, functionality: fully functional, machine/vehicle number: W4X379R04317, Year of construction: 2004, operating hours: 2,257 h, load capacity: 1,000 kg, lifting height: 2,520 mm, fuel type: electric, mast type: simplex, construction height: 1,680 mm, fork length: 940 mm, empty load weight: 855 kg, drive type: Elektro, High lift truck Fahrgestellnummer: W4X379R04317 Mast type: Standard Technical condition: good Battery Volt: 24V Battery Ah: 200Ah Battery year of construction: 2015 Description: Linde L10 No.: M0082 Year of construction: 2004 Operating hours: 2,257 The device is visually and technically in good condition. Subject to errors and prior sale. If you have not found your truck, please contact us. We have a large selection of other appliances on site. Scale, Nedpfxouhw D Es Afajcr

Year of construction: 2025, condition: new, Weighing unit with 10 weighing heads (containers) for very precise weigh checking, with 2.5-Liter volume each. Special design to suit pasta (up to 300mm length) and pasta like products; reversible vibration motor and rotating pole between every two linear feeder pans to allows completely drop onto linear feeder pans. - Specifications: max. speed of the machine in neutral: 50 cycles/minute; weighing range: 10-3000g; accuracy +/-0.1-2.0g; touchscreen operation; stagger dump; double door hopper to allow faster dropping; stainless steel; 220V, 1.5kW; L1600xW1136xH1484; 600/650kg. Nsdpfx Afjv Nmq Ajaocr That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, Year of construction: 2025, Weighing unit with 10 weighing heads (containers) for very precise weigh checking, with 2.5-Liter volume each. Special design to allow high speed operation, stronger stagger dump function to avoid jams, individual control of each linear feeder, etc. - Specifications: max. speed of the machine in neutral: 60 cycles/minute; weighing range: 10-3000g; accuracy +/-0.1-2.0g; touchscreen (large version) operation; stagger dump; double door hopper to allow faster dropping; stainless steel; 220V, 1.5kW; L1436xW1086xH1258; 500/550kg. Nodpfev Nmraox Afascr That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Year of construction: 1962, condition: good (used), machine/vehicle number: 1886, Used vertical hydraulic internal broaching machine with 3 broaching points Tractive force: 10.000 kg clearing length: 1.200 mm Broaching points: 3 pieces Distance between the broaching points: 380 mm Mounting diameter of the broaching heads 3 x Ø ___mm Passage width between the cylinders: max. XXX mm Cutting speed: hydraulically infinitely variable from 1 m/min to max. 7 m/min Return speed: hydraulically infinitely variable from 7 to max. 25 m/min Space requirement of the machine: (w x d x h) approx. 1,300 x 1,450 x 3,350 mm (without pit) Power supply / connected load: 380Volt 50 HZ / 8.0 KW Accessories / special equipment: The machine is equipped with a workpiece table with 3 holes for 3 broaching positions. The tool clamping system is provided for spring-mechanical locking in the drawbridge and in the feeder. The machine has an integrated coolant system. Remarks: Ncsdpfot Dwb Dex Afaor The machine is designed for use in series production, ideally a foundation (pit) or optionally a platform is required for optimum use. Drawing heads and needle lifters are available on request. The machine can be viewed in our warehouse.

Condition: new, Year of construction: 2025, Weighing unit with 10 weighing heads (containers) for very precise weigh checking, with 2.5-Liter volume each. - Specifications: max. speed of the machine in neutral: 70 cycles/minute; weighing range: 10-3000g; accuracy +/-0.1-2.0g; touchscreen operation; stagger dump; double door hopper to allow faster dropping of larger sized granulate like products; stainless steel; 220V, 1.5kW; L1600xW1136xH1484; 500/550kg. Ncjdpsv Nmqcsfx Afaor That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: used, mileage: 354,172 km, power: 70 kW (95.17 HP), first registration: 07/2012, fuel type: diesel, overall weight: 3,500 kg, axle configuration: 2 axles, wheelbase: 3,250 mm, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro5, number of seats: 2, Equipment: ABS, airbag, Power/Engine : 2.143 cm³, with turbocharger Axles : 4x2 Brakes : Disc brakes Cab : Audio System BASETech Radio Cooling body : Cold Car, bunker doors/ice, 3 doors left, number of doors right 3 doors Cooling unit : Thermo King, compressor/electricity drive, cooling down to -25 °C Other equipment : Power steering, immobilizer ID: 117812 Cold Car, bunker doors/ice, 3 doors left, 3 doors right Thermo King compressor/electric drivedrive wheelbase 3250mm refrigerated body SERVICEINTERVAL INDICATOR ASSYST DISC BRAKE ABS FUEL FILTER WITH WATER SEPARATOR FUEL PREHEATING BRAKE SYSTEM WITH ABS AND ASR ELECTRONIC STABILITY PROGRAM (ESP) REAR SPRING HARDENER STABILIZERS HA UNDER FRAME REINFORCED STABILIZER BAR FRONT AXLE REINFORCED STABILIZATION STIFFENER F. FGST. You can find more of our offer under Non-binding offer, sale only to traders, errors and prior sale reserved Advertisements and company logos on vehicles may have been digitally processed on photos Ncjdpoud D Hxefx Afajr

Year of construction: 1991, condition: good (used), machine/vehicle number: nn, Broaching Machine – Vertical Manufacturer: Locher Model: RWIL 10 x 1250 Year of manufacturing: 1991 Force: 10 Tons Stroke: 1.250 mm Area required: approx. 170 x 150 cm With automatic lead Magnetic chip-conveyor Ncedpfxefc T Ews Afajr

Year of construction: 2025, condition: new, Multihead weigher with 10 weighing heads (containers) for fast and very precise weighing operations. Due to protection class IP66 especially for products where the machine has to be cleaned frequently (e.g. frozen or deep-frozen food). Double door hopper to allow faster dropping. - Specifications: max. speed of the machine in neutral: 70 cycles/minute; weight range: 15-3000g; volume per hopper: 2.5L; accuracy: +/-0.5-2.0g; touch screen operation (large version); stainless steel; 220V, 1.5kW; machine dimensions: L1500xW1120xH1400mm. Njdpfx Aev Nmp Esfaecr Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, Year of construction: 2025, functionality: fully functional, type of input current: three-phase, warranty duration: 12 months, overall weight: 5,000 kg, input current: 44 A, table width: 1,200 mm, table length: 2,700 mm, The compactor is designed to compact the bottoms and tops of pallets. After one cycle one pallet is nailed. Nailing is carried out mechanically. The machine automatically takes nails from the storage bins, where they are in bulk. The pallet components are taken from the external magazines by two people . The XP 1000 nailing machine is designed to produce industrial pallets in the 800-1200/1200-2600 size range . The nailing cycle is adjustable from the control panel , takes a minimum of 10 seconds . Hammer plates adjustable on the full range of hammer . Nedpfx Afet Tyn Sjaocr Standard equipment of the nailing machine includes 16 hammers on eight plates and one set of 800/1200 pallet molds . Other molds on request for an additional fee . The performance of the machine depends on the workers and their speed in stacking the parts.

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: H2X387J04185, Year of construction: 2018, operating hours: 12,087 h, load capacity: 2,500 kg, lifting height: 4,760 mm, free lift: 1,500 mm, DGUV certified until: 02/2027, fork length: 1,600 mm, Equipment: UVV, UVV 02/2027 2,500kg Triplex 3rd & 4th Fork Positioner Electric Forklift Forklift Truck No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 2,500 kg Lift height: 4,760 mm Overall height: 2,176 mm Fork length: 1,600 mm Free lift: 1,500 mm MACHINE DETAILS Mast type: Triplex with full free lift Drive type: Electric Dimensions & Weight Dimensions (L x W): 4,100 x 1,250 mm Weight: 4,800 kg Drive type: Electric Battery: 14/09/2018, 80V 575AH, very good performance measured at 84.3V Operating hours: 12,087 h EQUIPMENT Ex-Linde full-service machine Service valid until 02/2027 UVV valid until 02/2027 3rd & 4th valve; fork positioner with side shift Fully enclosed cab with heater and windscreen wiper Facelift model with tilt angle display All measurements are approximate values. No liability is assumed for typographical or measurement errors. PICK-UP CONDITIONS Nodpfxeyzf Ayj Afaocr Side loading up to 5 t possible with a large onsite forklift at your own risk. Collection ONLY with email payment confirmation! Collection WITHOUT appointment Monday to Friday 7:00 am – 4:30 pm. Mast can be dismantled for transport on request if too tall. If collection is not made within the agreed period, a storage fee of €20 per machine per day will be charged (the additional payment must be made before collection).

Condition: excellent (used), Year of construction: 2008, Battenfeld HM 100/525 with Battenfeld R10S Robot / Operating Hours: approx. 19,000 in automatic mode Year of manufacture: 2008 Injection Unit: Screw diameter: 40 mm Shot weight: 228.4 g Injection pressure: 2,100 bar Dosage volume: 251 ccm Clamping Unit: Clamping force: 100 t Tie bar spacing: 470x420 mm Platen size: 680x663 mm Ejector: hydraulic Clamping unit: hydraulic Control system: UNILOG B6 - touchscreen Ncedpfx Ajy Dqhgjfajr Additional equipment: Machine in very good technical condition Operating hours: approx. 19,000 in automatic mode Total operating hours: 26,580 Euromap 67 Robot interface Air valve x 1 Hydraulic core pull x 1 Injection unit is wear-resistant and corrosion-resistant Battenfeld R10S Robot Year of manufacture: 2015 5-axis robot: 3 axes powered by servomotors (electric); axis B - pneumatic, axis C Robot with adapter Purchase of robot at extra cost Dimensions: Weight: 4,600 kg Length/Width/Height: 4.23x1.41x2.05 m All machines offered are started up by our service technicians prior to sale. It is possible to receive a video of the technical tests for the selected machine or to participate in live technical tests at our premises in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2007, Battenfeld TM 100/525 Year of manufacture: 2007 injection unit: Screw diameter: 40 mm Injection weight: 228.4 g Injection pressure: 2100 bar Metering volume: 251 ccm Clamping unit: clamping force: 100 t tie bar distance: 420x420 mm size of clamping platens: 640x640 mm ejector: hydraulic clamping unit: toggle lever Control system: UNILOG B2 Additional equipment: Euromap 67 Robot interface Hydraulic core pull x 1 Control with hot runners x 12 Injection unit is wear resistant and resistant to corrosion Central lubrication Automatic mold height adjustment Dimensions: Weight: 3900 kg Length/width/height: 4.46x1.33x1.78 m Drive: Pumps/motor: 18.5 kW Heating power: 12,1 kW Nedpsy Dqhmofx Afaecr Total power: 30.6 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: used, Year of construction: 2006, grinding diameter 250 mm grinding length 1000 mm Control Kavalir K 51 peripheral speed 25 - 45 m/sec max. workpiece weight between centres 80 kg Ncodpfx Afex I Sigeasr voltage 400V AC 50 Hz control voltage 24V AC/DC current -Sicherung für Zuleitung 35 A weight of the machine ca. 3,8 t In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: excellent (used), Year of construction: 2019, Speedmaster CX 102-5 LX2 Year of Manufacture: 2019 Condition: Very good Status: Under power Availability: Immediately Highlights: - AirStar Pro: Central air supply cabinet (water-cooled) - Prinect Inpress Control 2: Inline spectrophotometric measurement system - Prinect Press Center XL 2 control console - Ultrasonic double sheet detection - Wallscreen XL touchscreen - Pull lay control – double sheet detection - Preset Plus feeder - Electromechanical stream controls - Feeder touchscreen display - AutoPlate Pro: Fully automatic staggered plate change - Program-controlled automatic blanket washers for blanket and impression cylinders - Program-controlled fully automatic inking unit washer - Preset Plus Delivery X2 - Dynamic sheet brake - Technotrans CombiStar CAN (water-cooled) ink temperature control - Alcolor Vario dampening system - Energy-saving system with automatic start/stop for all drives - Acoustic package - ScrollStar air compressor - Water-cooled press - Sinus-synchron drive Nsdoy Eyi Aepfx Afaecr - PowderStar AP 500 CAN: Powder application system - XL sheet feeder system - Sheetfed control - AirTransfer system (for sheet transfer) - Tresu coating unit with chambered doctor blade - FilterStar: Single-stage dampening solution filtration - High-end chambered doctor blade system - InsertStar - Automatic central lubrication system - CleanStar Compact: Efficient powder emission removal at delivery - DryStar Combination CANopen dryer for conventional ink and coating with 3 cassettes - StaticStar Compact: Antistatic system Machine inspection possible. Video available upon request.

Condition: new, Year of construction: 2026, Bore 25 mm number 6 Dimensions (LxWxH) 155 x 140 x 130 mm weight - pallet system 14 kg Two new Toolholder for BMT 65 turret Nsdpey Ehv Rsfx Afajcr Price for each toolholder 6x Ø 25 mm bore extern and internal coolant Haas ST- line / BMT 65 for Dooasan, Haas, Hwacheon

Condition: good (used), mileage: 261,948 km, power: 301 kW (409.25 HP), first registration: 05/2018, fuel type: diesel, tire size: 385/65R22,5, axle configuration: 8x4, wheelbase: 4,520 mm, fuel: diesel, brakes: retarder, color: orange, driver cabin: day cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: steel-air, total length: 10,900 mm, total width: 2,550 mm, total height: 3,700 mm, loading space length: 6,990 mm, loading space width: 2,420 mm, Year of construction: 2018, Equipment: ABS, Bluetooth, air conditioning, central locking, crane, cruise control, electric window regulation, power mirror, retarder, traction control, - Heated mirrors - Digital tachograph - Tachograph (recording device) - Fixed - Halogen lamp - Short cab - Manual - PTO (Power Take-Off) - Pump - Radio/cassette - Rearview camera - Lane departure warning system - Fabric Ncedjy Eckiopfx Afajr - Auxiliary brake system Number of axles: 4, Configuration: 8x4, Total tank capacity: 300 liters, Fifth wheel: Fixed, Number of diff locks: 2, Suspension type: Air suspension, Cab type: Short cab, Cruise control, Tachograph (recording device), Digital tachograph, Air conditioning, Power windows, Electric mirrors, Radio/cassette, Color: Orange, Heated mirrors, Rearview camera, Lighting type: Halogen lamp, Lane departure warning system, Bluetooth, Flashing lights, Engine output: 301 kW (404 Hp), Fuel: Diesel, Euro: 6, Transmission type: Opti-cruise, Gearbox make: Scania, Gears: 12, Auxiliary brake system, Retarder brand: Scania, Power steering, ABS, ASR, PTO (Power Take-Off), PTO type: 1, Starter battery, Pump, Central locking, Seat arrangement: 1+1, Seat upholstery: Fabric, Seat adjustment: Manual, Crane, Crane manufacturer: Hiab X-HIDUO 258, Crane position: Rear-mounted, HIAB 258EP5 Transmission Gearbox: SCA, 12-speed, automatic Axle configuration Brakes: Disc brakes Axle 1: Tyre size: 385/65R22.5; Steering; Tread depth left: 7 mm; Tread depth right: 7 mm; Suspension: Leaf spring Axle 2: Tyre size: 315/80R22.5; Twin tyres; Tread depth left inside: 7 mm; Tread depth left outside: 8 mm; Tread depth right inside: 9 mm; Tread depth right outside: 10 mm; Suspension: Air suspension Axle 3: Tyre size: 315/80R22.5; Twin tyres; Tread depth left inside: 7 mm; Tread depth left outside: 7 mm; Tread depth right inside: 8 mm; Tread depth right outside: 8 mm; Suspension: Air suspension Axle 4: Tyre size: 315/80R22.5; Lift axle; Steering; Tread depth left: 8 mm; Tread depth right: 6 mm; Suspension: Air suspension Functionality Crane: Hiab X-HIDUO 258, mounted at the rear of the chassis Platform height: 133 cm Pump: Yes Condition Technical condition: Good Visual condition: Good Damages: None Number of keys: 1 Financial Information Leasing price: €1,284 per month (default, 72 months); Please contact us for further information and terms Identification License plate: KLEYN1 Kleyn Trucks is one of the world’s largest independent traders of used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our range includes all European makes, years of construction and price categories. Why buy from Kleyn Trucks? Simple! • Large, fast-moving stock • Recognizable quality • Fair prices • Proper business conduct • We speak many languages • We understand our customers • Assistance with import and transport • (Export) license plates are arranged quickly • Expert technical services • The security of 'recognizable quality' • And much more… Please visit our website for special offers and complete stock: Leasing through Kleyn Trucks is available in most European countries! Quickly calculate your leasing rate and send a...

Condition: excellent (used), Year of construction: 2019, liter capacity 22 l coolant R407C pressure 4,5 bar t Ncodpfx Aey D T U Nsfaer tank 70 l total power requirement 15 kW weight of the machine ca. 0,3 t dimensions of the machine ca. 0,7 x 0,7 x 2,2 m

Condition: ready for operation (used), Year of construction: 2000, operating hours: 2,981 h, spindle speed (max.): 3,500 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 1,035 mm, spindle motor power: 18,500 W, overall weight: 5,600 kg, controller manufacturer: FANUC, controller model: MSG-501 MAPPS, number of axes: 3, This 3-axis MORI SEIKI SL-253B MC/1000 was manufactured in 2000. It features a maximum turning diameter of 260 mm and a turning length of 1,035 mm. The machine is equipped with a spindle speed range of 35–3,500 RPM and a robust turret with 12 stations. If you are looking to get high-quality turning capabilities, consider the MORI SEIKI SL-253B MC/1000 horizontal turning machine we have for sale. Contact us for further details. • Max turning diameter: 260 mm • Max turning length: 1035 mm • Spindle nose/bore: JIS A2-8 / 86 mm • Bar capacity: 74 mm • Rapid traverse (X/Z): 18 / 24 m/min Nodpfjy D Rnyex Afajcr • Live tooling (BMC): 3,000 RPM / 6.5 kW • Tailstock: MT 5, 150 mm stroke • Control: MSG-501 MAPPS (Fanuc) • Turret: 12 station VDI 40 Technical Specification Counter Spindle No Driven Tools Yes

Condition: excellent (used), End mill, end mill, cutter, face mill, milling head Ncedpfxsy D Nblo Afasr -Manufacturer: PWZ, End mill, angle end mill, cylindrical end mill, original packaging, carbide-tipped -Type: 100x50x40 251G-TH10 66-007 -Hole: Ø 40 mm -Number: 9x milling cutters available -Price: per piece -Box dimensions: 125/115/H70 mm -Weight: 1.6 kg/pc.

Condition: new, Year of construction: 2025, machine/vehicle number: WR300208, fuel type: diesel, power: 1,000 kW (1,359.62 HP), motor manufacturer: Caterpillar C32, General information Field of application: Construction Weights Empty weight: 6.985 kg Functional Generator capacity: 1.250 kVA CE mark: yes Other information Fuel consumption: 185.5 Liter per Hour at 75% Load Generator: Caterpillar SR5 Frequency: 50 Nedpfx Afoxq Up Esaecr Voltage: 400 Drill equipment: Control Panel Transport dimensions (LxWxH): 4,64x1,68x2,16 Production country: US Additional information Please contact Kenny Bongers, Tijmen Pesselse, Arjen van Dijk or Ronald van der Laar for more information = Additional options and accessories = - Control Panel

Condition: used, mileage: 640,000 km, fuel type: diesel, Year of construction: 2018, IVECO EUROCARGO 120E25, Year 2018, EURO 6, curtain-side body M10.20 x 2.55 m, hydraulic lift/lowering system with remote control, full air suspension, 6-cylinder engine, automatic gearbox, air conditioning, 640,000 km. Financing or leasing available on site. Njdpfxey Hcfis Afaocr

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, operating hours: 5,360 h, load capacity: 2,500 kg, lifting height: 4,100 mm, free lift: 1,750 mm, load center: 600 mm, fuel type: diesel, mast type: duplex, construction height: 2,650 mm, motor manufacturer: KUBOTA, gearing type: hydrostat, fork carriage width: 1,380 mm, fork length: 1,100 mm, fork width: 120 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: superelastic tires (black), front tire size: 16x7x10 1/2, rear tire type: superelastic tires (black), rear tire size: 22x10x16, overall weight: 9,055 kg, empty load weight: 6,555 kg, total height: 2,250 mm, total length: 1,550 mm, total width: 1,500 mm, color: yellow, Equipment: CE marking, all wheel drive, front guard, lighting, pallet forks, sideshift, 🚜 USED FORKLIFTS WITH QUALITY ASSURANCE – FT LOGISTICS ✅ 📌 Years of experience | 🛠️ In-house workshop and paint facility | 👨‍💼 Professional advice | 🚛 Own transport fleet | 🤝 After-sales support 🔎 Looking for a forklift you can truly count on? We are a reputable supplier of new and used forklifts with many years of experience. 🌍 We serve customers all over Europe – from small enterprises to international manufacturers. Our forklifts are more than just equipment – they are a guarantee of smooth, reliable logistics operations. ⭐ Why choose us? 🔧 Each forklift undergoes a full technical inspection (diagnostics, testing, filter and oil replacement, key component overhaul) 📄 Complete UDT certification available on request 🎨 In-house painting and service facilities – machines are refurbished both visually and mechanically 🚚 Europe-wide transport – handled by our own fleet and trained drivers 👷 Operator training on delivery + onsite functional test 🤝 Post-sale service and technical support – we remain at your disposal after the purchase 👀 Opportunity to inspect and test machines at our premises – visitors welcome! 🌟 Hundreds of satisfied customers across Europe – join those who have already placed their trust in us Nodpjy Hb Ezjfx Afaocr 💶 Financing options – we work with most leasing companies 📑 Invoice in EUR or PLN – as preferred by the client 📦 ON OFFER: 🏗️ COMBILIFT CB2500 – Four-Way / Multi-Directional Forklift 📅 Year of manufacture: 2016 ⏱️ Operating hours: 5360 h ⛽ Drive: Diesel ⚖️ Load capacity: 2,500 kg 📏 Mast: Duplex – 4,100 mm 🔩 Fork positioner 1,380 mm | Forks 1100 mm 🛞 Superelastic tyres – 100% tread ⬆️ Free lift: 1750 mm ✅ Technical condition: Excellent – after major service ✨ Visual condition: Well-maintained, rust-free, ready for immediate use 📐 Dimensions: Height: 2,250 mm Overall length: 1,550 mm Width: 1,500 mm Positioner width: 1,380 mm Overall height: 2,650 mm 🎯 Ideal for: 🏢 Warehouses with narrow aisles 🪵 Wood, steel, and pipe industries 📦 Handling long loads 🏭 Indoor and outdoor applications 💼 FT Logistics – Quality you can rely on. Service you can trust.

Condition: excellent (used), CATALOG NUMBER 7751 TECHNICAL DATA - Track width: 250mm - Working width of roller: 250mm - Max blade diameter: 300mm - Blade bore diameter: 60mm - Max cutting height: 100mm - Table width with extension: 520mm - Table length: 1580mm *from above: - pawls: 2 rows - metal pressure slip roller - shaft with saw blades - smooth metal slip roller *from below: - slip roller - guide rail - pawls - track - central track lubrication - stepless feed speed adjustment - feed motor: 0.75kW - main motor: 15kW - extraction port diameter: 200mm - overall dimensions L/W/H: 1640x1400x1550mm - weight: 1000kg ADVANTAGES – Italian manufacture – in very good condition Nodpfx Afsyh H Hveaocr – used multi-blade saw Net price: 32,900 PLN Net price: 7,830 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (if there are significant exchange rate fluctuations, the price may change)

Condition: excellent (used), CATALOG NUMBER: 6911 TECHNICAL DATA - Track width: 350 mm - Shaft width: 370 mm - Max cutting height: 200 mm Ncodpfx Afeyh Nr Usajr Maximum saw blade diameter: - Upper shaft: 340 mm - Lower shaft: 300 mm - Blade bore diameter: 80 mm From above: - Kickback guards - 2 pressure slip shafts - Pressure unit - Saw shaft 37 kW - 2 smooth slip shafts From below: - Infeed table + guide rail - Kickback guards - Crawler track - Saw shaft 37 kW - Crawler track - 1 outfeed shaft, slip, smooth - Pneumatically pressed rollers - Maximum saw blade diameter: 300 mm - Electric lifting of upper body up/down 1.1 kW - Automatic central lubrication - Electrically controlled stepless feed speed adjustment 3 kW - Extraction nozzle diameter: 230 mm, 250 mm - Dimensions (LxWxH): 3000x2300x1900 mm - Weight: approx. 4500 kg ADVANTAGES – Italian production – Twin-shaft – Used multi-blade saw – very good condition Net price: PLN 168,900 Net price: EUR 40,200 Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), CATALOGUE NUMBER 6907 TECHNICAL DATA - Loading hopper inlet at the top: 1980x1050mm - Loading hopper inlet at the bottom: 980x1050mm - Discharge for shredded wood: diameter 210mm - Rotor working width: 980mm - Main motor: 30kW - Pump motor: 1.1kW - Number of knives: 36 pcs - Knife size: 40x40mm - Screen: 18mm Nsdpfxsyyzito Afascr - Pusher drawer - Electric auto-reverse - Dimensions (L/W/H): 2100x2030x2070mm - Weight: approx. 3500kg – French-made – Similar to WEIMA WL 10 – New knives installed – Auto-reverse – Pusher drawer – Very good condition – Used shredder Net price: 88,900 PLN Net price: 2,160 EUR Net price calculated at exchange rate of 4.2 PLN/EUR (in case of major rate fluctuations, price may change)