Used Lanico Uv 245 for sale (1,784)

Condition: ready for operation (used), Heidenhain UV 105 . 344 980-02 Serial number: 11545633A – in exchange (Exchange service), Professionally overhauled and fully tested with a 3-month warranty, 100% functional, scope of delivery as shown in the photos. Iaedjx Etkaepfx Aa Ejw Attention: In the exchange process, your defective replacement part must not show any mechanical damage such as fractures, as these can no longer be repaired. In such cases, an additional charge of 400,- EUR incl. VAT will apply.

Condition: ready for operation (used), Heidenhain UV 130 ID: 324 998-03 SN: 13939866B – including test protocol, professionally fully overhauled and tested with 3 months warranty, 100% functional, scope of delivery as shown in photos. Please note: In the exchange process, your defective exchange part must not exhibit any mechanical damages such as fractures, as these are beyond repair. In such cases, a subsequent charge of €500 incl. VAT will be applied. Attention: You are bidding on an inverter from Heidenhain UV 130 ID: 324 998-03 SN: 13939866B on an exchange basis (exchange service), professionally fully overhauled and tested with 3 months warranty, 100% functional, scope of delivery as per photos. In both repair and exchange procedures, your defective exchange part must not show any mechanical damage such as breakages, as these are no longer repairable. In this case, a surcharge of €500 incl. VAT will apply. Iasdpfey Nrm Usx Aa Ejw

Condition: good (used), functionality: fully functional, working width: 500 mm, total width: 1,100 mm, total length: 2,250 mm, total height: 1,400 mm, Water-cooled LED-UV dryer in operation; the machine is equipped with a control system allowing speed adjustment. It features two powerful water-cooled LED lamps for immediate surface drying. Iodpfx Aey Exz Rea Ejaw

Condition: as good as new (ex-display), Schölly Flexilux Mercury vapor Light Source 2000W White/UV selectable Isdpsfr T Hvsfx Aa Ejaw prices are EXW

Condition: used, This listing is for Thermo Scientific Evolution 300 UV-Visible Spectrometer The unit is in full working condition and ready for immediate use Ijdpfezdurmjx Aa Eeaw This high-performance double-beam spectrophotometer delivers exceptional accuracy and versatility for demanding research and routine quality control applications. Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory.

Condition: new, Year of construction: 2021, operating hours: 2 h, functionality: fully functional, machine/vehicle number: M614B703, number of ink cartridges: 8, color channels: 5, number of print heads: 5, resolution (max.): 1,200 dpi, paper weight (max.): 50,000 g/m², paper width (max.): 2,100 mm, paper height (max.): 3,100 mm, number of feeding trays: 1, total length: 4,710 mm, total width: 4,200 mm, total height: 1,510 mm, space requirement length: 6,000 mm, space requirement width: 5,000 mm, space requirement height: 2,500 mm, type of input current: DC, input current: 11 A, input voltage: 240 V, Equipment: documentation/manual, Mimaki JFX500-2131 UV LED flatbed printer, year 2021, in new/unused condition. The machine has only 2 operating hours and is fully functional. This is a large-format industrial UV LED flatbed printer designed for high-quality direct printing on rigid materials. Suitable for printing on PVC foam boards, acrylic/Plexiglas, PET, PC, cardboard, glass, wood, composite panels, and other flat rigid materials. Iedpfx Aozdcizsa Eoaw Technical specifications: Model: Mimaki JFX500-2131 Year: 2021 Serial number: M614B703 Maximum print area: 2100 x 3100 mm Maximum media thickness: 50 mm Maximum media weight: up to 50 kg/m² Print resolution: up to 1200 x 1200 dpi Print heads: 6 industrial piezo print heads Ink configuration: CMYK + White Ink system: bulk ink system, 8 x 2-liter tanks UV system: UV LED lamps Interface: USB 2.0 Power supply: single phase, 200–240 V, 50/60 Hz Power consumption: 2.4 kVA Machine dimensions: 4200 x 4710 x 1510 mm Machine weight: approx. 1400 kg The machine is located in Lithuania and can be inspected by appointment. Documentation/manual is available. Suitable for sign making, advertising production, industrial printing, interior decoration, display production, and rigid material printing.

Condition: used, Year of construction: 2004, travel distance X-axis: 1,600 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller manufacturer: Fanuc, overall weight: 9,000 kg, table length: 825 mm, table width: 625 mm, controller model: 21i MB, Travelling Bridge CNC Vertical Machining Centre Table size (2) 825 x 625 mm. Number of pallets: 2 Movement x-Axis 1600 mm. Movement y-Axis 600 mm. Movement z-Axis 500 mm. 4th Axis (Rotary table) NC Max table load 1200 kg Number of tools in magazine 51 pieces. Maximum spindle speed 12.000 R/pm. Tool taper DIN 69871A CNC control Fanuc 21i MB If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Iaodpfx Aozavluja Eew Feel free to view our other advertisements for a complete overview of our stock.

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, number of ink cartridges: 26, color channels: CMYK + White + Varnish, number of print heads: 6, resolution (max.): 1,200 dpi, paper width (max.): 3,200 mm, paper height (max.): 50 mm, total width: 3,200 mm, counter reading (color): 1,328, year of last overhaul: 2025, type of input current: AC, input current: 15 A, input voltage: 240 V, We offer this used Liyu DSJ3204 UV HYBRID Digital Print Machine, year of construction 2022. Model number: DSJ3204 Year of manufacture: 2022 Serial number: M33DB0012C0E0 Net weight: 2400 kg Voltage: 200-240 V Current: 15 A Power consumption: 3300 W Frequency: 50 Hz Country of origin: China €63,900 including dismantling at our location and setup at the buyer's site by manufacturer Liyu Price is subject to negotiation (Transport to the customer and unloading at the customer's site are to be organized and are the responsibility of the customer/buyer.) Liyu Platinum EQ3 LED Hybrid Flatbed and Roll-to-Roll UV Printer Condition: Lightly used and in excellent condition Flatbed and roll-to-roll printing INCLUDES 3 mm aluminum composite panels 3050 mm x 1500 mm approx. 24 pieces INCLUDES 3 mm foam board 3050 mm x 2030 mm approx. 160 pieces Includes 26 unopened 1-liter bottles of UV ink Printed output approx. 1328 m² as of May 6, 2026 The Platinum EQ3 hybrid printing press is a state-of-the-art machine that meets the demands of modern printing. This machine boasts a wide range of features that enable users to complete their tasks more efficiently. Iaedoy Nl E Rjpfx Aa Ejw The convenient dual-sided material feed accelerates the workflow and saves time and effort. Furthermore, the 4-zone vacuum system ensures that the material is securely held in place – resulting in higher print quality and a reduced risk of material shifting. Collision and safety sensors play a crucial role in workplace safety. They detect potential collisions and protect both the operator and the machine. The Platinum EQ3 Hybrid can print on materials up to 50 mm thick, opening up a broad range of application possibilities. This flexibility allows for the processing of a variety of materials for diverse projects. The automatic material height measurement system facilitates the precise adjustment of material parameters for accurate printing results. This feature not only improves print quality but also reduces material waste. Number of printheads: 6 RICOH GEN6, 6pl Printheads can be upgraded by speed up to 16 printheads. Inks: Currently CMYK, White, Vanish Print resolution: 1200 dpi Print speed (maximum): 180 m²/h Flow height: 50 mm Color gamut: CMYK + White + Light + Luminaire + Varnish Ink types: UV LED Drying system: UV LED Accessories: Includes inks (Cyan x 1, Magenta x 3, Yellow x 1, Black x 3, White x 2, Varnish x 3, Cleaning Solution x 3, each in 1-liter containers) and cleaning wipes. Further pictures and videos available upon request. For greater distances, a viewing can also be conducted via live video.

Condition: ready for operation (used), Year of construction: 2008, operating hours: 88 h, PCS-H: console for ink and register control with touch panel Electronic double sheet detection Electronic missing sheet detection Iodpfsy H Elxsx Aa Ejaw Photocells Automatic ink regulation from console RyobiMatic-D: alcohol dampening with variable speed Technotrans refrigeration unit Automatic washing of blankets and rollers Semi-RPC: semi-automatic plate changer Circumferential, axial and diagonal registers Extended delivery High pile delivery GrafiX powder sprayer Books and tools 88 million impressions

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, PCS-G control desk, IVS - Ink Volume Setting, Grafix dry spray > RYOBIMATIC dampening system, Ryobi RPC semi-automatic plate change > Preset - automatic size device > Suction feed board > Automatic blanket, roller and impression-cylinder washing device > High pile delivery, non-stop delivery Technotrans LED UV dryer Interdeck between 1st and 2nd unit Iedpfxoy Hx Imj Aa Eeaw 45 million

Condition: used, Year of construction: 2023, operating hours: 448 h, power: 186 kW (252.89 HP), maximum speed: 50 km/h, front tire size: 600/70 R30 | 0%, rear tire size: 710/70 R42 | 0%, tire size: 710/70 R42, number of beds: 43, Tires (front): 600/70 R30, Tires (rear): 710/70 R42, Operating hours: 448, First registration: 17.12.2024_____Standard equipment/technical data ENGINE: Max. power 180/245 kW/hp (ISO 14396), Max. torque 1100 Nm. Maximum power with power management 194/265 kW/hp, Max. torque with power management 1178 Nm. 6 cylinders, 7.4l AGCO Power - 74 LFNT-5D, CR, 4V. Emission standard (DOC+SC+SCR) without exhaust gas recirculation, Stage 5. Electronic engine control with Vistronic fan control. Engine speed memory. Powercore engine air filter with coarse dirt pre-filter. EasyCare radiator package. Additional fuel pre-filter with water separator. 500 liter fuel tank. Isdpfx Aasvv Dp No Esaw

Condition: ready for operation (used), Year of construction: 2014, An industrial large-format digital printer is offered. Max. print area: 3020mm x 2020mm, compressed air requirement: 7-10bar (100-150PSI), short-circuit withstand strength: 10kA, control: PLC. Equipped with UV curing system, vacuum table. Weight: approx. 3750kg, overall dimensions X/Y/Z: approx. 5950mm/2900mm/1550mm. Inspection possible by arrangement. Iaodpozcfibefx Aa Ejw

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 245 h, load capacity: 1,600 kg, lifting height: 3,244 mm, load center: 600 mm, fuel type: electric, mast type: simplex, construction height: 2,190 mm, battery capacity: 375 Ah, battery voltage: 24 V, fork length: 1,150 mm, tire condition: 100 %, drive type: Elektro, High-lift pallet truck Load centre: 600 Mast type: Standard Condition: Refurbished without warranty Technical condition: Very good Front tyre type: Vulkollan Front tyre size: Brand new Front tyre condition: New Rear tyre type: Vulkollan Iaodpfx Aeuttlwoa Esw Rear tyre size: Brand new Rear tyre condition: New Battery voltage: 24V Battery capacity: 375Ah Battery manufacturer: suitable Battery type: PzS Battery year of manufacture: 2018 Description: Overhauled, serviced and inspected according to FEM 4.004 (UVV) // Completely repaired, serviced and checked Free hydraulic function for rotary units or telescopic forks

Condition: used, Year of construction: 2005, functionality: fully functional, UV drying tunnel suitable behind screen printing machines B1 size. Fully working. Including stacker Iasdpfx Asza Tv Roa Esw

Condition: used, UV-9 Oven 11 units available, year of manufacture 2022 and 2023. Ijdpjx Tg Hwsfx Aa Eeaw Configuration: 6726613 UV-9 Oven, 7262431 UV-9 Base model 7263582 Option, closed loop top 7262797 Inlet and outlet shutter option 7263074 Traffic control (board drop detection) 7263583 Board counter 7263584 Board jam detection (entry and exit) 7264524 Automatic width adjustment for conveyors Price from €19,000

Condition: used, length ca. 4.000 mm Working height ca. 900 mm Weight ca. 2.500 kg Iasdpfx Ajvn N Ihja Eew Return transport / mechanization suitable for Weinig Univar for transporting entire window sashes, panels or similar large workpieces

Condition: like new (used), Serial: 26557-PO1 Iaodpfx Aohxyq Eja Ejw Stainless, variable speed conveyor with UV disinfection zone, the UV disinfection zone consists of two arrays of UV lamps, the top array is mounted above the wire belt and bottom array of lamps is mounted below the wire facing upwards. This is set up to achieve disinfection on all sides of a product placed on the conveyor, HMI touch screen controls, belt dimensions 3500mm x 500mm, stainless wire mesh belt, with manual, 1Ph

Year of construction: 2002, condition: ready for operation (used), Offered is an aluminum miter circular saw. Saw blade diameter: 550mm, power: 4000W, speed: 2800rpm, control: manual with digital display for cutting angle. Equipped with extraction hose, noise protection enclosure. Weight: approx. 750kg, overall dimensions X/Y/Z: approx. 1400mm/1500mm/1900mm. Inspection possible by arrangement. Iedpfey Uyfpex Aa Eoaw

Condition: good (used), Viessmann cooling/freezing chamber External dimensions: 5700 x 3000 x 2450 mm Internal dimensions: 5420 x 2700 x 2150 mm Plate thickness: 150 mm Stock status: 1 piece The chamber is easy to assemble Aggregate and cooler included Isdpfx Aaoiauifj Eeaw We have many other refrigeration devices. Chillers, compressors, coolers, condensers, chillers, cold rooms, refrigeration and gastronomic furniture as well as machines and devices for restaurants and meat processing. See our other auctions or call us, not everything is machineseeker.

Condition: used, Cooling/freezing chamber Viessmann -External dimensions: 3300 x 2100 x 2450 mm -Internal dimensions: 3100 x 1900 x 2250 mm -Plate thickness: 100 mm -Door clearance: 800 mm -Stainless steel floor Iajdpfx Aoxqpgrja Eew -Cooling/Freezing unit in set -Stock quantity: 1 -The chamber is easy to assemble

Condition: new, Year of construction: 2025, Yanigav Earth Auger TAM 245 Ioder Eznispfx Aa Eoaw • Simple three-point hitch • Very robust, welded chassis • Versatile, high-performance gearbox from 30 to 90 HP • Usable auger diameters from 10 cm to 80 cm and up to 1.80 m in height • Offset of 1.30 m on each side of the axis • Chassis length: 245 cm • Auger tilt adjustment (front/back and right/left) • Auger not included

Condition: good (used), For sale is a used Panhans milling machine Type 245 with 8 milling speeds. The machine has been inspected and refurbished by our qualified staff and is in good condition. Technical data: - Double swiveling unit - Swiveling range -45° to +45° - Electrically height-adjustable and swiveling Iaodey Nncfspfx Aa Eow - Overhead control panel - 8 milling speeds - Direction of rotation switch - Motor power 11 kW / 15 HP - Year of manufacture 2002 The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: milling machine, router, milling Reference: R-S1632

Year of construction: 2015, condition: refurbished (used), functionality: fully functional, machine/vehicle number: E61MH16062525487 / E11MH15102480183 / DT1UE15055010409, This listing concerns the Rational CMP 61 / CMP 101 combi steamers offered as a duo system. The units have been fully refurbished in-house and are in perfect working order. As shown, the package includes both combi steamers, the UltraVent condensation hood, and a mobile stand, all offered for a single total price. Iaodpfxey I Tudj Aa Esw Please note: The two Rational units pictured next to the duo system are not part of this offer. The total tower height is 2125 mm. For delivery, the duo system can be disassembled as needed. You will receive an invoice with clearly itemized VAT. Service: We are happy to help you find a certified Rational service technician anywhere in Germany. Are you looking for a specific Rational model? Contact us—we have access to a wide range of both used and new equipment. We are pleased to advise on any type of Rational unit, including SCC, CM, CMP, VCC, iVario, iCombi Classic, and Pro. The Rational CombiMaster® Plus is robust and delivers top-quality results thanks to its advanced features, allowing for the highest level of food quality. It supports the chef’s craft with precise climate control in the cooking chamber, and exact adjustment of temperature, humidity, airflow, and cooking duration. Technical Data – UltraVent Condensation Hood: (9261) W x D x H: approx. 854 x 1226 x 470 mm Minimum door opening for transport (W x H): 845 x 1050 mm Power Supply: 230 V / 50-60 Hz Weight: approx. 55 kg Serial number: DT1UE15055010409 Condition: used, fully refurbished, fully functional Technical Data – Combi Steamer CMP 61 (9257) Serial number: E61MH16062525487 Year: 2016 Tray supports: 1/1, 1/2, 2/3, 1/3, 2/8 GN Capacity: 6 x 1/1 GN Meal output per day: 30-80 Width: 847 mm Depth: 776 mm Height: 782 mm Minimum door opening for transport (W x H): 845 x 850 mm Weight: 103 kg Connection: 3NAC 400 V / 10.0 kW / 50-60 Hz Condition: used, fully refurbished, fully functional Technical Data – Combi Steamer CMP 101 (9260) W x D x H: approx. 847 x 776 x 1042 mm Minimum door opening for transport (W x H): 845 x 1050 mm Power supply: 400 V / 18.6 kW / 50-60 Hz Capacity: 10 x 1/1 GN Weight: approx. 132 kg Serial number: E11MH15102480183 Year: 2015 Condition: used, fully refurbished, fully functional Additional information: Operating modes: - Steam: from 30°C to 130°C - Hot air: from 30°C to 300°C - Combination: from 30°C to 300°C Finishing®: brings pre-cooked and chilled foods to serving temperature with perfect climate control Automatic grease separation for clean cooking chamber air Manual cleaning program 5 fan speeds: from delicate to robust, the CombiMaster® Plus has the right air speed for all foods Double-glazed, ventilated door (swinging for easy cleaning) LED cooking chamber lighting Core temperature probe Cool-down function High-performance fresh steam generator (automatic rinsing and draining) Hand shower with automatic retraction Dynamic air circulation If you have any questions, would like advice, or wish to inspect the units on site, you can reach us by phone during our business hours: Monday–Friday 09:00–13:00 and 14:00–17:00. Sale is subject exclusively to our general terms and conditions (AGB).

Year of construction: 2021, condition: new, functionality: fully functional, ANAPURNA H1650i LED UV Printing System: The entry-level, wide-format hybrid Anapurna H1650i LED is perfect for sign shops, digital printing houses, photo labs and mid-sized graphic screen printers looking to combine board and roll printing jobs. The engines print up to 1.65m wide for both outdoor and indoor jobs. The Anapurna H1650i LED is equipped with UV LED lamps, allowing you to print on a wider media mix, saving energy, cost and time. The white ink function allows you to print on transparent materials for backlit applications or print white as a spot color. Rigid Media Maximum Width: 165 cm (5.4 ft), 160 cm (5.2 ft) with borderless printing Maximum Length: 3.2 m (10.5 ft) – 4 rigid tables (2 rear and 2 front) Minimum Size: A2 Landscape (60 x 42 cm – 1.97 x 1.4 ft) Iedpfxsy It T He Aa Esaw Thickness Minimum Thickness: 1 mm (0.04”), Maximum Thickness: 45 mm (1.77”) Maximum Weight: 10 kg/m² on print table (22 lbs) Flexible Media Maximum Width: 165 cm (5.4 ft) Maximum Length n/a – limited by weight and diameter Thickness Min. 0.2 mm, Maximum Weight 50 kg (110 lbs)

Condition: ready for operation (used), Year of construction: 2019, A Fujifilm UV flatbed and roll printing system is available. Roll weight: 25kg, max. roll media width: 1620mm, max. rigid media width: 1610mm, min. media width: 210mm, max. media thickness: 13mm, max. roll outer diameter: 180mm, media core diameter: 2inch/3inch, max. print length: 3030mm, media guidance: 170mm. Machine dimensions X/Y/Z: approx. 3250mm/800mm/1550mm, weight: approx. 300kg. The system was only used from December 2019 until early 2024. Documentation vorhanden. An on-site inspection is possible. Iasdpfx Aey Tav Eea Eew