Used Kuka Kuka Rotor Für 1Fk7100-5Az91 Mit 86 61111H21 0001 Bremse + Resolver T2J34-D309 for sale (11,491)

Condition: like new (used), Year of construction: 2019, Technical Data: Cross-cutting line with punching unit Strip running direction from the operator's side: right to left Coil changing side in strip running direction: left Operator's side, straightening machine in strip running direction: left Raw material: • cold-rolled strip: S320GD; S350GD; S380GD (strip-galvanized structural steels) • plastic-coated steel strip • aluminum • basically dry surface or commercially oiled • laminated strip • stainless steel Uncoiler: Type: Power Coil M-BS 1600 2 coil loading stations The coil storage track is designed so that a distance of 900 mm remains between 2 coils with an outer diameter of 1600 mm Loading semi-automatic Strip width 200 – 1600 mm Max. coil weight: 16 tons Coil diameter inside uncoiler: 508 - 610 mm Coil diameter outside uncoiler: 900 - 1600 mm Spreading range 470 – 625 mm Machine frame movable on linear guides Spreading hydraulically Strip withdrawal from the coil automatically Coil side guidance automatically, 4-point coil side guidance Press roller, rubberized, centrally positioned on the strip, hydraulically Electrical locking of lifting and traversing movement Control system: Control concept LBF – Control Concept LSV SCHULER Cross-cutting shear: Type: SCHULER HSU-1600 Shear gap adjustment is carried out by motor The shear is used to cut the strip end at a right angle before processing the first part of a production sequence. Bridging roller bed: Arrangement of the bridging roller bed upstream of the straightening machine Type: VOMA C1600 N Passage, max. strip width 1600 mm Fgedpfx Aozzrutelbog Length of bridging roller bed 1050 mm Material running height in the straightening machine 1600 mm Straightening machine: Type: SCHULER SVH 12-53-70-96 / 160-1600 Straightening speed max. 60 m/min. Straightening speed min. 5 m/min. Number of straightening rollers 12 pcs. Diameter of infeed rollers 160 mm Diameter of straightening rollers 3 x 53 mm, 3 x 70 mm, 6 x 96 mm Loop radius 1600 mm Material running height in the straightening machine 1600 mm Strip side guidance automatically Support rollers to prevent roller deflection All-roller drive Looping unit: Threading process in the direction of roller feed via looping bridge, remote-controlled Automatic loop control for continuous straightening process Loop depth below floor approx. 2,500 mm 4-point guidance through 2 sequentially arranged strip side guides To increase feed accuracy, the feed length is recorded by means of a measuring wheel (arranged in front of the feed rollers) Roller feed: Type: SCHULER AC-RP-160-1600 Feed rollers, diameter 160 mm Loop radius 1600 mm Material running height above floor 1200 mm Drive, upper and lower roller, servo drive via a common distributor gear Special coating of the feed rollers Max. acceleration 15 m/s² Brake rollers: Brake rollers generate the strip pull during the rewinding of the strip material from the system onto the coil, in a generator-like manner Adjustment system hydraulically Punching unit with NC tool holder: Type: SCHULER HSU-1600 Design: Double C-frame Punching unit designed as 2 C-frame units, which can be traversed transversely to the strip direction by means of 2 servomotors, for accommodating the punching tools Number of punching tools per side max. 6 pcs. Punching tool, servomotor-driven, 90° rotatable 1 punching cylinder per punching tool Punching force min. 580 kN Max. hole diameter ∅ 90 mm for material thickness 4 mm Manufacturer of punching tools: WILSON TOOL Elevating table: Type: LAWE

Condition: good (used), Industrial robots Manufacturer: Kuka Type: KR30-3, KR30-3 F, KR30L16-2 Type: KR60HA, KR60L30HA All types with KRC4 control Kuka KR30-3 KRC4 Year of manufacture 2014-2017 = several in stock Kuka KR30-3 Foundry KRC4 Year of manufacture 2018 Kuka KR30L16-2 KRC4 Year of manufacture 2017 = several in stock Fgodpfxstui D Tj Albeg Kuka KR60HA KRC4 Year of manufacture 2014 Kuka KR60HA KRC4 Year of manufacture 2018-2019 = several in stock Kuka KR60L30HA KRC4 Year of manufacture 2017 = several in stock 10926

Condition: excellent (used), We have several adjustment sets, all fully functional. Fodpfx Aoyrd S Tjlbegg

Condition: ready for operation (used), Vacuum lifter with swivel crane and chain hoist. Fedpfxszf Akto Albsgg

Condition: excellent (used), Year of construction: 1988, functionality: fully functional, Thickness planer PANHANS Type 426, 630mm is in very good optical and technical condition; the machine comes from a small assembly company and has only been used lightly. Everything functions perfectly. With anti-kickback device. The planing knives can be adjusted very easily and precisely; adjustment gauges are included, which can be screwed onto the knife shaft, ensuring the highest precision. The chips can be effectively removed through the closed system. With 4-knife shaft for standard strip planing knives. The thickness table is mounted on 4 trapezoidal spindles and is tilt-proof and warp-resistant. With a protective cover that can be folded up. Max. planing width 630mm, max. planing height 250mm. We will personally deliver and demonstrate the machine throughout Germany for 220.00 Euros, so you have no risk when purchasing. Delivery to other countries is also possible upon request. The machine is low-noise according to DIN 45635. Fsdpfxjzzrqus Albogg With very effective feed rollers; the infeed and outfeed rollers are made of metal, and the pressure can be adjusted on both rollers. The infeed roller is ribbed and divided into individual segments; the outfeed roller is smooth. The machine table has 2 sliding rollers, which can be used if required and raised upwards. The sliding rollers can be very helpful with damp wood. With manual. The feed speed is 7 and 14 m/min; the feed is driven by a separate geared motor. With extraction port 160mm. The height adjustment of the thickness table is electric; fine adjustment is done with a handwheel. The planing height can be read very precisely on a mechanical counter. With this machine, you can achieve a very clean planing result. The powerful 7500-watt motor ensures that almost no fatigue occurs. The machine contains 4 sharpened knives. Very robust and durable design, best workmanship with the highest quality. The machine can be used immediately. 380V, 7500W Speed: 5000 rpm Year of manufacture: 1988 Weight: approx. 900kg Tested GS version. Optimal, simple, fast and safe operation. The construction of the machine is heavy, robust and durable – simply indestructible.

Condition: like new (used), Year of construction: 2019, operating hours: 20 h, functionality: fully functional, overall weight: 1,069 kg, load capacity: 120 kg, arm reach: 2,701 mm, controller manufacturer: KUKA, controller model: KR C4, teach pendant manufacturer: KUKA, teach pendant model: KUKA SmartPAD, warranty duration: 12 months, Equipment: documentation/manual, KUKA KR 120 R2700-2 with KR C4 – AS NEW / only 19.95 operating hours We offer a KUKA KR 120 R2700-2 industrial robot in as-new condition with KUKA KR C4 controller. Manufactured in 03/2019 with only 19.95 operating hours. Robot specifications - Model: KUKA KR 120 R2700-2 - Payload: 120 kg - Reach: 2701 mm - Year of manufacture: 03/2019 - Operating hours: 19.95 h - Cable set: INT 084ST2700 - Configuration: ES13 133 CTR MB1 PNT EPS AIR - Colour: KUKA Industrial Orange Controller - KUKA KR C4 EU - KSS 8.5 - Servo configuration SC4.1 - 400 V transformerless power supply - Siemens SCALANCE X208 - Parallel Safety interface X11 - Ethernet interface X66 - CSP 2x USB 3.0 - Cabinet base with spacer - Set of 75 mm rollers Installed KUKA software & technology packages - KUKA.PROFINET M/S 4.1 - KUKA.DiagnoseSafety 3.0 The robot is supplied with the complete configuration according to the attached technical specification. 12-month warranty included. CUSTOM CONFIGURATION AVAILABLE The robot can be supplied in its current configuration or customized according to the customer's application and technical requirements. Depending on the application, RSA Systems can provide configuration and installation of suitable KUKA software and technology packages, communication interfaces and fieldbus systems, as well as configuration for external axes and other application-specific requirements. Additional services available on request Installation & commissioning | Programming & optimization | Integration & automation | Custom robot configuration | Technical support | ISO 9283 metrology & calibration | KUKA robot training Inspection and functional demonstration of the robot at our facility is possible by appointment. Fgsdpfszyyynjx Albjg Send us your application and technical requirements and we can prepare the robot configuration according to your project. RSA Systems s.r.o. Experience. Reliability. No Compromise.

Condition: ready for operation (used), KUKA stator for 1FK7103-5AF81 motor, serial number: YFTN50397188010, used, in good condition, 100% functional, scope of delivery as shown in the photos. Fedpfjzx Nhxex Albegg

Condition: ready for operation (used), Tool turret 5603923WZ SN:1286 with 12 stations for EMAG VSC 200 DUO, manufacturer unknown, used, normal signs of wear, 100% functional, scope of delivery as per photos. ATTENTION: Please enquire for packing and shipping costs separately! Fgedpfx Aszziudjlbog

Condition: new, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 106653, New ZH for KR30/60. This is a new part supplied by the manufacturer KUKA. Fgsdpfxsxzynuj Albjg

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,100 kg, maximum load weight: 34,900 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 7,690 mm, total width: 2,550 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 100 %, Custom-Made Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs. Chassis, Saddle, Container Fine-grained steel welded construction, saddle plate with 2 replaceable kingpins Container receptacles: 1 x 20 ft in the center (or swap body container 7.15 / 7.45), not retractable at the front, the pivot pins of the container locking mechanism in the longer version 24 tons, two-stage support jacks, single-sided operation With anti-splash flaps according to EC standards Front axle drip tray with 1 1/4 inch drain pipe + 1 1/4 inch shut-off valve, including drip pan, with perforated tread plates, approx. 400 mm wide, left + right between the drip tray and the longitudinal beam 4 hose racks, approx. 4500 mm long (hose box) for hose pipes, 2 x DN 200 on the outside + 2 x DN 160 arranged in the center, at the rear hose box (stainless steel) 300 mm deep, splash-proof, lid (stainless steel) all around with rubber seal, with drain hole at the lowest point, then without lid on the hose pipes 1 stainless steel grounding lug at the rear on the right side of the frame, with international grounding sticker on the frame Climbing steps at the rear right on the underrun protection, at the rear right on the outside of the main beam, tread plate approx. 260 mm long and 300 mm wide Fodpei Rixkofx Albogg Axles + Suspension SAF disc brake axles Axle/suspension laser-measured for reduced tire wear and fuel consumption Offset axle spacing (combined transport) up to 44 tons total train weight Air suspension 1st axle: automatic lift axle, including forced lowering and start-up assistance, activation 3x brake Braking system 2-line compressed air braking system Color-coded line routing for easy maintenance Spring brake parking brake 2 fail-safe coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by tractor units that ensure the effectiveness of the ABS! With raising and lowering valve Vehicle - Driving stability system Axle load detection via EBS-CAN bus signal, for display via the display in the driver's cab, truck must be prepared accordingly, no truck installation (no calibrated scale) Wheels and tires 385/65 R22.5, manufacturer's choice Steel rims, factory silver Electrical system 24 volts, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red side marker lights at the rear 1 x 15-pole socket at the front, without connecting cable Operating instructions The specified total weight is technically possible, but depending on the load, the total weight may not be reached while complying with the permissible axle/support and saddle loads. (Poor driving and handling behavior may occur due to incorrect load distribution) This vehicle may only be loaded with 20' tank containers that comply with ISO 668 and in particular ISO 1496-3! The tank containers must have "end-load-transfer areas"! Country of registration / signs Germany Type approval according to EC 2007/46 24/7 service hotline Prepared for single-row license plate holder Warning sign according to ECE - 70 Acceptance according to ADR, according to 9.1.1.2 of the ADR, EX/II, EX/III / Vehicle registration certificate for the transport of certain dangerous goods (ex.B3) with warning sign on the rear, not valid for substances according to UN 0

Condition: ready for operation (used), Tool turret 5603923WZ SN:1285 with 12 stations for EMAG VSC 200 DUO, manufacturer unknown, used, normal signs of wear, 100% fully functional, scope of delivery as per photos. ATTENTION: Please enquire separately for costs of packing and shipping! Fedpfx Aozzit Telbsgg

Condition: ready for operation (used), Tool turret 5603923WZ with 12 stations for EMAG VSC 200 DUO, manufacturer unknown, used, normal signs of wear, 100% functional, scope of delivery as shown in the photos. ATTENTION: Please enquire for charges for packing and transport separately! Fgjdszzit Hjpfx Albjg

Condition: ready for operation (used), Tool changer unit for Nakamura Tome TW20 with Index motor 22603035, oil pump, used, in good condition, 100% functional. Scope of supply as shown in the photos. PLEASE NOTE: Please request separate pricing for packaging and shipping! Fgsdpfx Aozzivbjlbog

Condition: used, Year of construction: 2007, functionality: fully functional, machine/vehicle number: 940920, input voltage: 400 V, type of input current: three-phase, The robot has been working flawlessly for 7 years in our facility, performing the automated unloading of furniture panels from the drilling line. Fsdpfxezyrx Ae Albjgg

Condition: used, mileage: 1,001 km, fuel type: diesel, color: silver, driver cabin: other, gearing type: other, loading space length: 5,100 mm, loading space width: 2,350 mm, loading space height: 900 mm, Vehicle location: Bovenden, steel body Fgsdpji Rrtwsfx Albog Body: 3-S tipper, aluminum side boards, split on the right, foldable and swing-out. Exchange system available as an option (ex 2646) – additional cost with semi-trailer coupling frame: EUR 1,500.00. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, interim sales and errors!

Condition: ready for operation (used), Kuka 1FK7105-5AY81-1YY3-Z servo motor, serial number: YFVD50670459012, used, in good condition, 100% functional, scope of delivery as shown in the photos. Fgjdpfx Alszwtpqobog

Condition: ready for operation (used), Rexroth RF03 12 305054 circuit board for rotary encoder with accessories, used, normal signs of wear, 100% functional, scope of delivery as shown in the photos. Fodpozzhlzefx Albegg

Condition: refurbished (used), PRICE ON REQUEST! Price on request: The price for the products offered is not stated directly, but must be requested. Fgjdpfxeral R Te Albeg Condition of the products: The products on offer are used, but they have been completely overhauled and all wearing parts (O-rings, precision bearings, shaft seals, screws, circlips, Castrol oil) have been replaced. Measurements and tests: Precise measurements were carried out, particularly in the area of axles and gearbox clearances. An 8-hour load test was also carried out. (Gearbox play axle 4 - 0.01 / axle 5 - 0.01 / axle 6 - 0.02). Delivery and packaging: The products are delivered in a special box and the shipment is insured. Central hand exchange: It is possible to receive the central hand in exchange. Alternatively, it can also be purchased without exchange on request. Warranty: A warranty of 12 months is offered, and there is an option to extend this to 18 months, but at an additional cost. Stock: The supplier has more than 100 central hands in stock, various models are available. Express overhaul: A quick overhaul of KUKA central hands is offered, which takes place within 48-72 hours after delivery. Repair service: In addition to the products offered, there is also a repair service for ABB wrists. Repair and maintenance of industrial robots: Is your industrial robot experiencing problems such as oil leaks, high gear backlash, crash damage or significant wear and tear? Our experienced repair and maintenance service is at your disposal! Our services at a glance: Fixing oil leaks: We identify and eliminate leaks, replace seals and ensure reliable sealing. Reduce gearbox backlash: Through precise measurement and adjustment, we minimize gearbox backlash to ensure optimum performance. Crash damage repair: After collisions, we carry out a comprehensive analysis, replace damaged parts and restore full functionality. Wear reduction: All worn components are carefully replaced to extend the service life of your robot. Wrist repair for various brands: ABB, Yaskawa, Hyundai, Fanuc, Kawasaki, Nachi and many more brands. Why you should choose our services: Experienced team of robotics experts Fast diagnosis and repair Use of high-quality spare parts Customer satisfaction is our top priority Our services include the repair of all wrists from leading brands such as ABB, Yaskawa, Hyundai, Fanuc, Kawasaki, Nachi and more. We only sell in exchange. The sales price already includes VAT. On-site collection by appointment only. Contact us today for individual advice and a quote. We specialize in restoring your industrial robots to top condition! If you require further information or are interested in a product, we recommend contacting the supplier directly and sending an inquiry directly to "vertrieb(at)robotic-refit.de".

Condition: ready for operation (used), KUKA 1FK7083-5AF81-1YY3-Z S16 servo motor, serial number: YFU150407861021, used, in good condition, 100% functional, scope of delivery as shown in the photos. Fgjdezu Emcopfx Albeg

Condition: ready for operation (used), Siemens 1FT5076-0AF71-1 - Z AC variable-speed drive motor, Z = see nameplate, serial number: EK882610801001, with Binder 77 60013A00 brake, used, normal signs of wear, 100% functional, scope of delivery as shown in the photos. Fedpfx Alslg Iyusbegg

Condition: ready for operation (used), Siemens 1FT5076-0AF71-1 – AC variable speed drive motor, Z = see nameplate, serial number: YFR524263501001, with Binder 77 60013A00 brake, used, normal signs of wear, 100% functional, scope of delivery as shown in the photos. Fsdpelg Iyxefx Albjgg

Condition: ready for operation (used), KUKA 1FK7060-5AF71-1ZZ9-Z S03 servo motor, serial number: YFM0628693001035, used, in good condition, 100% functional, scope of delivery as shown in the photos. Fjdpszwzvlefx Albegg

Condition: ready for operation (used), Kuka 1FK7083-5AF81-1YY3-Z servo motor, serial number: YFV050657664024, used, in good condition, 100% functional, scope of delivery as shown in the photos. Fedpfozwtn Hsx Albogg

Condition: ready for operation (used), Kuka 1FK7083-5AF81-1YY3-Z servo motor, serial number: YFT035716101075, used, in good condition, 100% functional, scope of delivery as shown in the photos. Fgedozwtntjpfx Albeg

Condition: ready for operation (used), Siemens SIM encoder, communication with connecting cable for encoder, used, in good condition, 100% functional, scope of delivery as shown in the photos. Fgsdpfx Aozzhuislbeg