Used Kleiser 16.0 Sq. M. Kleiser Gmbh Horizontal Shell And Tube Heat Exchanger for sale (110,729)

Year of construction: 2015, condition: used, Waste water neutralisation Capacity: 8 m3/h Gjdoxbqr Dspfx Ak Uoug Operation / Control: Control cabinet with touch-screen display / WAGO Features: Neutralisation vessel (37 hl); final control vessel (4,5 hl); caustic vessel; acid vessel; pumps; process measurement, instrumentation and control technology; control cabinet

Condition: used, Year of construction: 2018, functionality: fully functional, volume flow: 10.2 m³/h, input voltage: 230 V, USED VACUUM PUMP Technical data Godpfx Ajw Rqx Dek Uoug Max. pumping speed 50 Hz (mbar) 8.9 m3/h Max. pumping speed 60 Hz (cfm) 6.0 cfm Ultimate vacuum 2 x 10-3 mbar / 1.5 x 10-3 torr Ultimate vacumm with gas ballast 1 x 10-2 mbar / 0.75 x 10-2 torr Ultimate partial vacuum without gas ballast 4 x 10-4 mbar / 3 x 10-4 torr Water vapor tolerance 40 mbar / 30 torr Number of stages 2 Permissible ambient temperature range (operation) 15 - 40 °C Permissible ambient temperature range (storage) -10 - 60 °C Max. outlet pressure (abs.) 1.1 bar Oil capacity min./max. 0.45 / 0.85 l Inlet connection small flange KF DN 25 Outlet connection small flange KF DN 25 Rated motor power 0.30 kW Rated speed 50/60 Hz 1500/1800 min-1 Protection class IEC 60529 IP 40 Dimensions (L x W x H) 503 mm x 156 mm x 240 mm Weight 24.8 kg Noise (sound pressure level) in dBA at 50 Hz or 1500 rpm/62% (VARIO)/1500 rpm (VARIO-SP)/12500 Upm (VACUU·PURE®) - 52 dBA NRTL certification - No

Year of construction: 1990, condition: good (used), Vulcanizing press of the company Wickert Maschinenbau GmbH Landau Year of construction: 1990 Machine-No. 2559 pressing force: 2800 kN heating plates: 500 x 500 mm heating: electric distance between plates: 200 mm control Siemens S5 OP17 (conversion to S7 feasible) incl. sliding table, vacuum pump, vacuum chamber, storage tank Gsdpfx Ajn Sm Ayek Ujug Good, used condition. With CE-marking.

Condition: excellent (used), Year of construction: 2015, Horizontal conveyor 3000x800mm Guedpfxju U Ii Es Ak Ujg year 2015 price: €2,450.00 contact: Mr. Rainer Eckerle

Year of construction: 1993, condition: good (used), Vulcanizing press of the company Wickert Maschinenbau GmbH Landau Year of construction: 1993 Machine-No. 2559 pressing force: 2800 kN heating plates: 500 x 500 mm heating: electric distance between plates: 200 mm Gujdpfxjn Sm A Sj Ak Ujg control Siemens S5 OP17 (conversion to S7 feasible) incl. sliding table, vacuum pump, vacuum chamber, storage tank Good, used condition. With CE-marking.

Condition: excellent (used), Year of construction: 2015, Horizontal conveyor 3000x800mm year 2015 price: €2,450.00 contact: Mr. Rainer Eckerle Gusdpfx Aeu N Argsk Ueg

Condition: excellent (used), Year of construction: 2014, Horizontal conveyor 2000x800mm year 2014 price: €1,850.00 contact: Mr. Rainer Eckerle Guodpfx Akju N Aykj Usg

Condition: excellent (used), Year of construction: 2015, Horizontal conveyor 3000x800mm year 2015 price: €2,450.00 Guodpfx Aou N Aqcek Uog contact: Mr. Rainer Eckerle

Condition: excellent (used), Year of construction: 2014, Horizontal conveyor 2000x800mm year 2014 price: €1,850.00 contact: Mr. Rainer Eckerle Guedpju N Axgofx Ak Usg

Condition: used, Product information: "Neher hand-operated spindle press" Condition: Used Year of manufacture: 1970s Guodpfxoztxvhs Ak Ueg Inquiry item: Transportation costs will be provided in a customized quote.

Condition: new, Year of construction: 2022, Model DPL-1530HP-4 kW 8 levels, 3000x1500mm (300kg load per level) Loading and unloading system Laser Raycus 4 kW Control system FSCUT 2000ER Laser head Raytools BM115, autofocus Chiller Hanli 3.8 kW Air blower 11kW Nesting software Cypnest-Nesting Software Low-pressure gas alarm, gas pressure monitor, and software control Voltage stabilizer 48-72 KVA Enclosure according to Laser Class 4 Heavy-duty machine base. Guodpeci Ik Sjfx Ak Uog High-performance servo motors. Intelligent cutting control system, easy operation Fast tack welding, supported by segment and step tack welding technology Specialized air duct with oversized diameter, ensuring smooth fume extraction. Completely enclosed design European CE standard Dual shuttle tables provide a high level of safety and convenience. Positioning accuracy ±0.05/1000mm Repeat positioning accuracy ±0.03/1000mm Acceleration 1.6 m/s² Max. speed 120 m/min Sheet metal loading capacity 1500 kg Size 8907×2813×2658 mm Laser power 6000 W Control system FSCUT 2000 Machine power 32-48 kW Voltage 380V/50Hz Delivery time: 5 months (construction time + transport) Delivery to customer's premises: €3,500 Installation and training: €8,850 Industry 4.0 software: €9,500 FILTERCUBE 2H, 4.0 kW, 40 m²: €10,500 The Filtercube series is a dust extraction system equipped with filter cartridges, used for fume filtration and dust removal.

Condition: new, Year of construction: 2024, Laser source: 12 kW Raycus/IPG Guedpfx Akoi Ar Ruo Uog Laser head: Precitec Pro-Cutter 2.0 Control system: FSCUT 8000 Effective working area: 1520x3050 mm Max. positioning speed: 120 m/min Max. acceleration: 1.5 m/s² Positioning accuracy: 0.02 mm/m Repeatability: 0.03 mm/m Max. table load: 1500 kg

Condition: new, Bee GTE-88/090/-08-V17-F pneumatic ball valve, 24V DC coil voltage, unused, 100% functional, scope of delivery as shown in the photos. Gedpfx Aoi D T Iysk Ujug

Condition: like new (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 282015 SDU8300, travel distance X-axis: 1,500 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 350 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 8 m/min, spindle speed (max.): 45,000 rpm, table width: 1,500 mm, table length: 1,000 mm, total height: 2,200 mm, total width: 2,800 mm, total length: 1,950 mm, type of input current: AC, input voltage: 400 V, spindle motor power: 6,000 W, CNC machine for powerful machining. The steel/granite sandwich construction for the moving axes, such as the gantry and cross slide, can optionally be driven by AC servomotors via ball screws or by linear motors. In conjunction with high-precision linear guides, it forms the basis of the massive steel/granite machine construction. The advantages of natural stone granite combined with high-strength, lightweight metal offer the highest stiffness while simultaneously reducing weight. This is the only way to achieve the desired dynamics and high feed rates. High-frequency spindles with up to 6.0 kW and 45,000 rpm with HSK25 / HSK32 tool holders are used as milling spindles. The 18-position tool changer (expandable to 36 tools), installed outside the working area, automatically moves from the protective housing to the milling spindle. With the 4th/5th axis designed as a swivel head and the integrated, high-precision gear drive modules, almost all positions of a complex workpiece can be reached with the milling tool. The machine is completed with new, state-of-the-art CNC control functions and an easy-to-use user interface. This allows for 5-axis simultaneous machining via RTCP (Rotation Tool Center Point) function. The control and operating components from Heidenhain include a touchscreen monitor and a comfortable handwheel. Different workpiece clamping systems can be mounted on the universal granite table via steel threaded bushings in a 150x150 mm grid. -Innovative steel/granite sandwich construction -State-of-the-art control technology based on Heidenhain -Automatic tool changer with tool measurement/inspection -Optionally with high-dynamic linear motors or ball screw drives -4th/5th axis as a swivel head or rotary tilting unit on the machine bed -RTCP, TLC, axis kinematics and clamping position compensation -Metal/granite sandwich construction -Rotary/swivel swivel head (4th and 5th axis) -High-dynamic linear motors in the X and Y axes -18-position tool changer, expandable to 36 tools -Heidenhain® TNC640 high-end control -Tool measurement by tool setter or laser -3D edge probe -Modern control panel -Water cooling -Heidenhain® LMT TT160 / optional laser measurement Godpfszzzyljx Ak Usug -3D measuring probe -Handwheel -Minimum quantity lubrication -Tool holders Ideal for machining: Brass Aluminum Ceramics Plastic Copper

Condition: good (used), Year of construction: 2019, Steel plate and chain belt conveyor Manufacturer: FMW Förderanlagen GmbH Gusdpfxozzx Ere Ak Ujg Year of manufacture: approx. 2019 Total length: approx. 45,000 mm Width: approx. 2000 mm For sale is a steel plate and chain belt conveyor with a total length of approximately 45 meters and a width of approximately 2 meters. Please refer to the drawing for detailed specifications. The conveyor is currently assembled and can be inspected upon request. Disassembly is not included in the price.

Condition: new, Year of construction: 2026, functionality: fully functional, spindle speed (min.): 12,000 rpm, spindle speed (max.): 36,000 rpm, High part output | 3D CNC milling for small workpieces up to 1000 x 800 x 400 mm. > Efficient milling spindle, short throughput times and high part output: Due to the highly efficient milling spindle, the 5-axis CNC machine creates a high part output. The CNC milling machine stands for absolutely fast production processes and short throughput times. In addition, the rotary table of the CNC milling machine performs the C-axis movement, making milling even more effective. > Little space required, fast commissioning: The RT-F 1400 CNC milling machine requires little space and can be commissioned within two days. Set-up times are minimal. The CNC machine can be easily moved to another location using a forklift. > First-class contour accuracy for 3D machining with fixtures: All components, such as milling tool, spindle and the machine are matched to each other and to the desired component. A fixture from HG GRIMME SysTech can additionally influence the milling quality. Existing fixtures can be reused at any time. > Use in industry and small businesses: The CNC rotary table milling machine RT-F 1400 is particularly suitable for 3D machining of smaller components (800x1000x400mm). The CNC milling machine is used just as successfully by large industrial companies, such as the automotive industry, as it is in small businesses. > Basic version of the CNC machining center - Protective cabin with automatic gate unit, pneumatic - Swiveling, integrated control panel - High-performance CNC control NUM Flexium+ with nPad and 19'' monitor - Tool changing system with 12 places, dust-tight - Tool measurement Renishaw-TS 27 R - chip tray, vacuum pump > 365 further equipment options - example CFK package The machine can be equipped with many further options. One example is the upgrade of the machine equipment for CFRP machining. The CFRP package takes into account many safety aspects that are necessary for the processing of composite material. We offer around 365 additional options across our entire product range and can further equip the basic machine offered at any time. > Suitable materials for the 5-axis CNC rotary table milling machine 1400: plastics, composites such as CFRP, model making materials, aluminum. Further technical data Cube dimensions component - 1000 x 800 x 400 mm (+162 mm substructure) Travels X/Y and Z - X/Y and Z: 1,040 x 1,400 mm x 725 mm Travels of rotary axes A and C Guodpfx Akjx S Etms Usg - Rotary axis C (table) ± 1,080°. - Swivel axis A, standard tool spindle with tool changing system ± 110°. Speeds - Rapid traverse linear axes X/Y/Z 40/40/30 m/min - Rapid traverse rotary axes A/C 14,000°/18,000° m/min Accuracies - Positioning accuracy ± 0.040 mm - Repeat accuracy ± 0.035 mm Machine rotary table - ø 800 mm Table load - approx. 200 kg Milling spindle - High-frequency milling spindle 9 kW (S6) - High frequency milling spindle 8 kW (S1) - speed 36.000 rpm - Tool holder HSK 40 E Machine weight - approx. 3000 kg Already included special equipment - Head suction for floating dust and chips - Interior with perforated footboards - interior lighting - Ethernet and remote maintenance - 3D spline - Connection T-Box (nPad) (subject to change without notice)

Condition: used, Year of construction: 1999, Used Capsuling Machine ROBINO GALANDRINO up to 15000 bph Guodpfxjvgvkmj Ak Ujg Introduction The machine provides a highly efficient solution for the bottling process. Specifically, it is suitable for operations requiring a machine with a production capacity of up to 15,000 bottles per hour (bph). This specific model, in particular, applies heat-shrink capsules, ensuring a secure and uniform closure on a wide range of bottles. Technical Specifications The MONOSTADIO Z T8 model, for instance, features 8 thermal heads, allowing it to operate at speeds of up to 15,000 bph. Consequently, the machine moves bottles from left to right, which is crucial for integrating it with other line equipment. Safety and Protections The machine, therefore, prioritizes operational safety with guards installed along its entire perimeter. Consequently, these safety guards minimize the risk of accidents during operation and ensure a safe working environment for operators. Additionally, the design complies with current safety regulations, ensuring reliability. Documentation and History This specific capsuling machine branded ROBINO GALANDRINO,  was built in 1999, includes a paper-based electrical schematic. This documentation is essential, as it aids in maintenance and troubleshooting. Moreover, it facilitates technical interventions when needed. The machine is currently not in use, but it’s production was stopped while it was in perfect working conditions. Conclusions of the Used capsuling Machine ROBINO GALANDRINO up to 15000 bph This capsuling machine, model MONOSTADIO Z T8, offers a capacity of 15,000 bph and utilizes heat-shrink capsules to ensure secure closure. Furthermore, its safety guards and included technical documentation make it a robust choice for bottling lines that demand high productivity and reliability. Consequently, verify bottle diameters and conduct regular maintenance to optimize the machine’s performance.

Condition: new, Year of construction: 2026, feed length X-axis: 80 mm, feed length Y-axis: 80 mm, feed length Z-axis: 60 mm, spindle speed (min.): 24,000 rpm, Perfect for: Applications in model and mold making, as well as for milling other materials – a universal powerhouse with a rapid traverse rate of 80 m/min. Materials: Plastics, composite materials such as CFRP/GFRP, model-making materials, aluminum. Industries: Automotive, aerospace, transportation & logistics, leisure industry, sanitary, boat building, automation. _____ Reference number: 1233 Availability from: approximately December 2026 / January 2027 CNC machine type: 5-axis CNC milling machine G-S-F/UNI (35-15) Spindle data: 13 kW / 10.3 Nm; 12000-24000 1/min; HSK F 63 Rapid traverse rate X/Y/Z: 80/80/60 Part dimensions X/Y/Z: 3500 x 1500 x 700 Control system: SIEMENS – Sinumerik One with hand terminal HT 2 Tool changer: 10 tools Tables: 1 table Vacuum system: yes Tool breakage and length monitoring: Renishaw-TS 27 R Gsdpjzy Updofx Ak Ueug Other: on request Year of manufacture: 2026 Condition: new

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 533 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. Gusdpjz Ag Rrsfx Ak Ueg - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 532 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. Gujdpfx Akjz Agw Ee Ueg - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 531 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available. Godpfjz Agv Usx Ak Uoug

Condition: new, SAPI Powder Coating The Perfect Coating for Lasting Protection. Powder coating is a highly effective and widely used method for applying a protective and decorative surface to various types of substrates. It is a dry finishing process where a fine powder made of resins, pigments, and additives is applied to a substrate. The powder is electrostatically charged, allowing it to adhere evenly to the surface and form a uniform coating. To achieve optimal adhesion and durability, the substrate is thoroughly cleaned and prepared first. Oils, dirt, and other contaminants are removed to ensure a clean surface. This is crucial for ensuring that the powder bonds effectively to the substrate, creating a strong and long-lasting coating. Components of a Powder Coating System A typical powder coating system consists of several components and devices required for applying and curing the powder coating. Spray Booth and Spray Area The booth provides a clean environment for the application process and ensures an even distribution of the powder. 🎨 Powder Coating Gun A powder coating gun is used to apply the powder coating to the workpiece. 💨 Powder Feed System The powder feed system consists of a hopper or container where the powder coating material is stored. It typically includes devices like powder pumps, feed hoses, and powder sieves to transport the powder from storage to the spray gun. 🔄 Pre-treatment Equipment Pre-treatment systems are used to prepare the substrate before applying the powder coating. This can include processes like cleaning, degreasing, rinsing, and surface treatment to ensure proper adhesion and durability of the coating. 🧼 Curing Oven A curing oven is a crucial component of a powder coating system. It is used to heat the coated substrate to the correct temperature so the powder coating melts, flows, and hardens into a permanent surface. The oven usually consists of a conveyor system or racks to transport the coated parts through the oven chamber. 🔥 Exhaust System An exhaust system is installed to remove excess powder, fumes, or volatile compounds generated during the coating process. It helps maintain a clean and safe work environment for the personnel and prevents the accumulation of powder particles in the air. 🌬️ Looking for a Powder Coating Solution? Are you searching for a custom powder coating solution? Gjdsun Sd Uopfx Ak Ueug We specialize in providing tailored powder coating solutions to meet your individual needs. Whether you have specific color requirements, complex designs, or challenging substrates, our experienced team is ready to deliver exceptional results. 💡 Contact us today to discuss your requirements, and let us develop a custom powder coating solution for you. 📞 Get in touch with us today!

Condition: new, Year of construction: 2025, power: 5 kW (6.80 HP), SAPI Premium 200-liter pressure blast machine with cyclone cleaner and abrasive vacuum for abrasive treatment. This blasting system provides a cost-effective, highly economical, and effective solution for open blasting work with semi-automatic abrasive recycling. Open blasting system for manual sandblasting of many different types of workpieces using a blaster with abrasive treatment. The abrasive is collected by hand after blasting and pushed into the collection hopper on the floor. The abrasive vacuum extracts the abrasive from the hopper and pulls it through the cyclone cleaner. The dust is extracted and collected in the dust container of the vacuum. Coarse particles are separated by a sieve. The cleaned abrasive falls back into the vented pressure blast pot and is available for reuse. Our SAPI safety shut-off ensures a safe and economical blasting process. The remote control allows you to start and stop the blast pot using a hand lever mounted on the blast hose package. This is a highly economical and effective solution for open blasting operations with semi-automatic abrasive recycling. The scope of delivery includes: Gjdpfx Aewc Rcnsk Ujug SAPI Premium 200-liter blast pot with 1 1/4" piping, pressure-regulated from 0.1 - 12 bar, max. operating pressure 12 bar High-performance 1 1/4" water separator, permanently installed on the unit SAPI safety shut-off device Cyclone cleaner for abrasive preparation with lifting device Abrasive sieve (inserted sieve in the blast pot hopper) Filling hopper 500x500x380 mm 4-meter connecting hose from the filling hopper to the cyclone cleaner 3-meter connecting hose from the cyclone cleaner to the abrasive vacuum cleaner Abrasive vacuum cleaner 5.5 kW, 400 V, 50 Hz with 70-liter dust container 10-meter blast hose package 25x7 mm, fully assembled with nozzle holder, hand lever, control line, and blast hose coupling Boron carbide Venturi long nozzle (diameter optionally 6 mm) mm, 8 mm or 10 mm)

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, A used horizontal form, fill, and seal machine (HFFS) from the DEAPHS series is for sale. It is designed for the automatic production, filling, and sealing of pouches made from flat film. ### Current Machine Condition The machine is currently set up for the production of 4-side seal pouches. The machine forms the pouch directly from flat film, takes over the filling process – in conjunction with a suitable dosing system – and then automatically seals the pouch. The DEAPHS series is fundamentally modular in design and can be adapted for other pouch types and applications, depending on the existing or additional equipment, for example: - 3-side seal pouches / sachets - 4-side seal pouches - Doypack / stand-up pouches Adaptation to other pouch types depends on the format, product, and required machine components and is not part of the current setup. ### Possible Applications Depending on the dosing system used, the machine is suitable for packaging, for example: - Powdered products - Granules and granular products - Food products Gedpeum R Ezjfx Ak Uoug - Animal feed - Cosmetic products - Technical and other non-food products - Single-serve packs, sample sizes, and samples Different dosing and feeding systems can be used for different products. ### Machine Equipment - Independent film unwinding shaft - Pouch bottom sealing - Pouch bottom former - 3 horizontal sealing units - 2 vertical sealing units - Servo-controlled film/pouch feed - Mechanical pouch cut - Vacuum pouch opening - Photoelectric sensor control for printed film - LCD touchscreen display - Panasonic PLC - Servo film drive The separate film unwinding system enables controlled film tension and adjustment to different film widths and pouch formats. ### Possible Dosing Systems Depending on the application, the machine can be combined with the following dosing systems, among others: - Auger dosing - Volumetric cup filler - Multi-head combination weigher - Piston filler - Pump filler / liquid dosing, e.g., Hibar Availability and scope of delivery of the respective dosing systems can be requested separately. ### Technical Data Machine dimensions: approx. 5,500 × 1,100 × 1,400 mm (L × W × H) Net weight: approx. 2,000 kg Power supply: 380 V / 3 phases / 50 Hz Connected load: approx. 6.5 kW Air consumption: approx. 0.23 m³/min ### Installed Components / Manufacturers Components from, among others: Mitsubishi, Panasonic, Autonics, ABB, Airtac, and SMC Suitable packaging films, as well as other dosing, feeding, and peripheral equipment, can also be offered depending on the application. Inspection of the machine is possible by appointment. Further information on pouch formats, working widths, possible dosing systems, and scope of delivery can be provided upon request.

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 530 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available. Godpfxszz Rpcj Ak Uoug