Used Kaiser+Kraft 2000/800 for sale (15,586)

Condition: used, Year of construction: 2002, The equipment described is a register punch manufactured by Bacher. This specific model is known as the ZollRegister punch Control 2000 Zoll and was produced in the year 2002. The machine has a size of 1400 mm. It is currently in stock and located in Germany. The register punch is reported to be in good condition, suggesting that it has been well-maintained and is ready for use. Format: 1400 mm Equipment: Register punch Hedpfx Akewzxzpo Usfl Good condition

Condition: used, Year of construction: 2011, Base Machine M800 X5 TV 1 WORKING RANGE X: 5,020 mm Y: 1,830 mm Z: 675 mm Clearance Height: 300 mm (from 50 mm suction cup height) MACHINE STRUCTURE The base structure is a monolithic construction made from thick-walled steel. It is reinforced across the entire machine bed with welded components, providing exceptional stability. The table design, with its large base, is the key to ensuring lasting precision and stability. The machine’s layout enables the operator to achieve optimal workflow with minimal space requirements. The mobile gantry is built as a solid monoblock. It is positioned in the X direction on prismatic, ground guides with recirculating ball carriages. The machining unit is mounted on this mobile support carriage, also on prismatic, ground guides and recirculating ball carriages. AXIS MOVEMENT All axes travel on prismatic linear guides with large cross-section and recirculating ball shoes with a wide contact surface, which ensures optimal sliding, even at high speeds and accelerations. The precise and fast positioning of the movable gantry (X-axis) is achieved via helical rack and pinion. Large cross-section recirculating ball screws ensure accurate positioning of the machining unit along the movable gantry (Y and Z axes). The perfect mechanical dynamics and maximum positioning accuracy are controlled by high-quality drives and brushless motors. Max. axis speeds: · X-axis = 90 m/min · Y-axis = 90 m/min · Z-axis = 30 m/min Safety device with bumper and light barrier 1 Bumpers with sensors are fitted to the movable upright, and a light barrier system is installed at the front of the machine. If the operator enters the active zone, the X-axis travel speed is reduced to a lower value of 25 m/min without stopping the machine. This system allows parts to be loaded during pendulum operation without the limitation of access areas, as seen with pressure mat systems. This prevents unwanted interruptions in the machining cycle and offers greater freedom of movement around the worktable. CE certification for the safety system 1 Safety protection fence 1 Side and rear protection fence Automatic central lubrication controlled via CNC 1 The lubrication of the X, Y, and Z axes is controlled by the CNC; intervals are regulated automatically, without manual intervention. Central extraction connector 1 All individual extraction connections of the machining units are collected into a central extraction port. Inside the port, there are various slider valves controlled by the NC. This reduces the required extraction air volume. Chip conveyor 1 Maxi – 5-axis electrospindle 11 kW HSK-63 “Prisma K 1 5-axis electrospindle, 11 kW at 20,000 rpm S1 (100% duty cycle) Speed: max. 20,000 rpm Rotation direction: left/right Liquid cooling Tool interface HSK 63F Inverter 18 kW, stepless, smooth power delivery Max. rotation B-axis = 200° (+-100°) C-axis = 650° Thanks to the non-orthogonal axes, it is possible to perform complex horizontal positioning in a small workspace. This enables the machining of complex geometries without the risk of collision. Hjdpfjxy Tmnox Ak Uefl

Condition: used, Motor 4.0 kW Roller diameter: 800 mm Max. cutting height: 440 mm Max. cutting width: 785 mm Table height: 970 mm Table dimensions: 1170 x 800 mm Blade width: 40 x 7/10 mm Blade length: 5630 mm Extraction port diameter: 120 mm Dimensions: 1625 x 940 x 2516 mm Weight: 650 kg Stock location: Nattheim Hsdpfx Akswayzbe Usfl

Condition: like new (used), Year of construction: 2023, functionality: fully functional, overall weight: 9,000 kg, cutting height (max.): 1,200 mm, cutting width (max.): 1,100 mm, roll diameter: 1,400 mm, total width: 2,100 mm, total length: 2,400 mm, input voltage: 220 V, saw band length: 10,450 mm, saw band width: 206 mm, power: 90 kW (122.37 HP), empty load weight: 19,000 kg, cutting speed: 40,000 mm/min, Equipment: cabin, We are selling a complete sawmill line with a VTZ 1400 PLUS vertical band saw from Mebor. The offer includes: - VTZ 1400 PLUS vertical band saw by Mebor - Heavy-duty log conveyor with loading arms - Log edger/canter BM900 by Mebor - Operator cabin for the vertical band saw - Roller and chain conveyors - Edging line VR800 S by Mebor with servo-driven, high-speed circular saw positioning Hjdpexq Rgyofx Ak Usfl - Twin-shaft multi-blade circular saw VC 900 D by Mebor - Waste conveyor line - Chipper shredder for waste TH200/500/3 by Rudnick & Enners - Sorting line 47-14 by Holzmatic

Condition: new, Year of construction: 2026, machine/vehicle number: TRV 2000 Ø700R, warranty duration: 12 months, High-Speed Optimization in Sawmills: TRV 2000 Makes It Possible! Discover TRV 2000, the perfect optimizer for both planed and unplaned boards, designed to deliver high precision, large cutting capacity, and incredible speed. A perfect combination of performance that will revolutionize your sawmill's workflow! Advanced Technology for Outstanding Results The TRV 2000 is equipped with the tried-and-tested CURSAL software, the technological core powering other optimizer series as well. This software is the ideal solution to speed up the production process, optimizing logs by recovering the lateral part, which traditional machines cannot efficiently utilize. It synchronizes perfectly with the multi-blade system to complete the cycle efficiently. Hodjv Ip U Iepfx Ak Uefl With a feed speed of 150 m/min (auto-limited), thanks to the Brushless motor, TRV 2000 eliminates the risk of accumulations, maintaining a continuous flow that integrates seamlessly with the fastest log saws. Uncompromising Precision TRV 2000’s precision is so high that re-sawing after passing through the multi-blade system is unnecessary. Thanks to its innovative technology, it is ideal for optimizing medium-sized, precious woods, making it the perfect choice for those seeking flawless results. Superb Design and Functionality The machine body is equipped with a reliable feed system, enabling movement from right to left through 8 toothed rollers. Pneumatic pressure wheels are specifically designed for unplaned boards, and the in-line optimization capability within the monoblock of the cutting machine allows it to work on curved and twisted boards. Explore Incredible Performance Watch the video on the side and see how TRV 2000 can optimize your production with extraordinary performance. Ideal Applications: Semi-finished wood products for furniture Packaging industry Recovery of boards from the sides of the log Windows, construction, and flooring Laminated, planks, structures TRV 2000: The Ultimate Solution for Modern Sawmills.

Condition: used, Year of construction: 2005, x-travel 2000 (775 + 600) mm y-travel 620 mm z-travel 520 mm Control Heidenhain iTNC 530 turning speed range - main spindle 12.000 min/-1 power capacity - main spindel 18 kW table surface area 1.200 x 600 mm rotary table diameter Ø 500 mm swivellable +15/-95 ° rotatable 0- 360 ° max. table load 1000/350 kg tool taper SK 40 number of toolpositions 30 pos. internal coolant system feed 20 bar rapid traverse ( X / Y / Z ) 30 m/min dimensions 5,0x 2,5 x 3,3 m weight of the machine ca. 11 t CNC-Machiningcenter Universal, 5-Axis and fixed table Machine overhold for 60.000 € - NC-Swivel-Rotary-Table integrated right working area - Fixed-Table left working area - 4th axis on fixed table 165 centre hight Hsdpfxjxbh D Do Ak Usfl - Chip conveyor - internal coolant - filter - 3D probe - Oil dust collector - 2022/2023 overhold for 60.000 € new slideways aspindles in all axis - electric roof - new spindle in 2016 at 20.800 Spindle hours

Condition: good (used), Technical Data for Pallet Racking System: Racking System: Arestant Type: NS Installation Specifications: Number of rack rows: 1 unit Length per rack row: 16,760 mm Number of bays per rack row: 6 units Number of levels incl. ground level: 3 units Volume Specifications: Pallet positions per bay: 9 units Pallet positions per rack row: 36 units Total pallet positions: 36 units Note: The images are for illustrative purposes only. Quantities shown may differ from the actual scope of supply! Scope of Delivery Includes: 07x Pallet rack uprights, used Color: sendzimir galvanized Profile dimensions: 80 x 70 x 2 mm Incl. horizontal and diagonal braces, baseplates Uprights are pre-assembled (bolted truss structure) 6,005 mm high 800 mm deep 36x Pallet rack beams, used Color: orange Beam type: M14051 Box profile: 142 x 50 mm Connector: 4 HK (hooks) Clear span: 2,700 mm 72x Safety pins, used Color: sendzimir galvanized For securing the longitudinal beams against accidental lifting 28x Anchor bolts, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Material: carbon steel, galvanized Approved for: cracked concrete 14x Shims, used Finish: fully galvanized Hfjdpfx Akow Tkmao Ujl For leveling rack uprights placed on uneven floors 01x Load sign With details for bay and shelf loads, manufacturer and order number Dimensions: 420 x 297 x 3 mm Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General Information about the Item: This item is offered for collection only. If transport or shipment of this item is required, additional costs will apply. These can be provided separately, depending on delivery location and scope, upon request.

Condition: used, Year of construction: 2001, Technical details: Hfjdpfx Akstwglae Uol spindle passage: 25 mm Article: CNC sliding headstock automatic lathe Manufacturer: Tornos Type: Deco 2000/20 Year of construction: 2001 Control: Fanuc spindle diameter: D25 mm max. speed: 7000 rpm comb: 2 (X,Z,Y-axis) Front attachment: 1 (X,Z,S-axis) Loading magazine: Tornos Robobar SSF Chip conveyor: Hinged belt conveyor other: various accessories such as polygonal impact device, HF spindle Please, contact us for getting more information and pictures on mail(at) or *

Condition: good (used), The scope of delivery includes: 01x collision protection guard rail, new / used Material color: yellow / black / white Total height: 400 mm Total depth: 180 mm Clear width: 800 mm Consists of: 02x Sigma profile, used Material color: white Profile dimensions: C: 130 x 50 mm Clear width: 800 mm 02x L - collision protection corners, new Material color: yellow / black according to DIN standard Total height: 400 mm Leg length: 170 x 170 mm Material thickness: 5 mm Weight/piece: 6.10 kg Hjdevmz Ahopfx Ak Usfl 08x screws: M12 08x nuts: M12 16x washers: M12 The collision protection guard rail is delivered completely pre-assembled. Your contact person in our company: Mr: Andre Evering Mr: Mario Klöver Mr: Falk Deutsch General information about the article: This article is only available for collection. Any additional transport or shipping of this article is associated with additional costs, which can be requested from us separately depending on the delivery location or scope of delivery.

Condition: used, Year of construction: 2000, Overview  The crate washer was manufactured in 2000 by the German company Bohrer. It is located at a German brewery and was part of a plant that has been shut down as it was replaced by a completely new line. In autumn 2024 the line was stopped and the machine was dismantled and stored.  Technical Details  - Capacity: up to 2,000 crates/hour (can be adjusted from 500 - 2,500 crates/hour) - Formats: - crate of 12 bottles 700ml 356 x 275 x 346 travel direction crosswise - crate of 20 bottles 250ml 360 x 275 x 255 travel direction crosswise - crate of 20 bottles 500ml 400 x 300 x 290 travel direction crosswise - crate of 20 bottles 500ml 400 x 333 x 260 travel direction crosswise - Horizontal and vertical spray nozzles - Spraying with hot caustic and fresh water - Caustic heater with temperature regulation is integrated in the machine - Machine is heated by steam - Dimensions: Hodpfevm D Umsx Ak Ujfl - Length: 4800mm - Width: 900mm - Height: 1400mm - Weight: 1800kg - Sieves for removal of dirt - Incl. documentation - Incl. spare parts list - Incl. Electrical diagram

Condition: new, Technical data for the pallet racking system: Racking system: SSI Schäfer Type: PR 600 Technical data for the installation: Number of racking rows: 01 unit Length per racking row: approx. 7,500 mm Number of bays per racking row: 03 units, each 2,400 mm Number of levels including base level: 02 units Included in the scope of delivery: 04x Pallet racking uprights, new Material color: Sendzimir galvanized Material color of base plates: RAL 5010 Enzian Blue Upright type: P73 Upright profile: 75 x 75 x 2.00 mm Incl. cross and diagonal bracing, Base plates The uprights are delivered unassembled (bolted frame) 2,350 mm high 800 mm deep Note: The racking uprights are delivered unassembled. We can pre-assemble the racking uprights for an additional charge of €17.50 plus 19% VAT. 12x Pallet racking crossbeams, new Material color: RAL 7035 light grey Box profile: 80 x 40 mm Crossbeam type: TRV1-240-084-30CE Agraffe: 5 hooks Clear width: 2,400 mm Max. load per pair of crossbeams: 1,600 kg, with evenly distributed load 06x Chipboard, 2nd choice, used Thickness: 22 mm Dimensions: 2,380 x 800 mm Surface: possibly coated Hjdpfx Akokr Uzbe Uefl (possibly in two parts) 48x Z-brackets for locking/inserting chipboard, surface galvanized Suitable for chipboard flooring from 22 - 38mm, can be rotated and inserted on both sides For a width of 40 mm 24x Locking pins, new Design: fully galvanized For securing the longitudinal beams to prevent accidental lifting 16x Bolt anchors, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Design: Carbon steel, galvanized Approved for: cracked concrete 08x Shims, new Design: fully galvanized For leveling the racking uprights that are installed on uneven ground 01x Load signs with information on bay and frame loads, manufacturer and batch number Dimensions: 297 x 210 x 2 mm Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only offered for collection. Any additional transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: new, Technical specifications for the pallet racking system: Racking system: SSI Schäfer Type: PR 600 Technical specifications for installation: Number of racking bays: 01 unit Length per racking bay: approx. 9,975 mm Number of bays per racking bay: 04 units, each 2,400 mm Number of levels including the base level: 02 units Included in the scope of supply: 05x Pallet racking uprights, new Material color: Sendzimir galvanized Material color of base plates: RAL 5010 Enzian Blue Upright type: P73 Upright profile: 75 x 75 x 2.0 mm Includes cross and diagonal braces, Base plates The uprights are delivered unassembled Hfjdpfsktbp Dox Ak Uol (bolted frame) 2,350 mm high 800 mm deep Note: The racking uprights are delivered unassembled. We can pre-assemble the racking uprights for an additional charge of €17.50 plus 19% VAT. 16x Pallet racking beams, new Material color: RAL 7035 light gray Box profile: 80 x 40 mm Beam type: TRV1-240-084-30CE Agraffe: 5 hooks Clear width: 2,400 mm Max. load per beam pair: 1,600 kg, with evenly distributed load 32x Locking pins, new Design: fully galvanized For securing the longitudinal supports against unintentional lifting 20x Bolt anchors, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Design: Carbon steel, galvanized Approved for: cracked concrete 10x Shims, new Design: fully galvanized For leveling the racking uprights that are installed on uneven ground 01x Load signs with information on bay and shelf loads, manufacturer, and batch number Dimensions: 297 x 210 x 2 mm Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. Any further desired transport or shipment of this item will incur additional costs, which can be requested separately depending on the delivery location and scope.

Condition: new, Wide-span shelving unit, new Dimensions: L 2550 x H 2000 x D 600 mm Includes 4 shelves Shelf load capacity: ~250 kg with evenly distributed load #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# Hsdpfxjcfb Alo Ak Usfl Basic shelving unit consisting of: 2x Shelf uprights, 600x2000mm Unassembled, includes cross and diagonal braces, Plastic footplates 8x Crossbeams 2450mm, Includes locking pins 4x Shelves 2440x545mm, Thickness: 22 mm

Condition: good (used), Shelf upright: 4,700 mm x 800 mm / Clear width: 2,700 mm Technical data of the pallet racking system: Racking system: Stow Type: Pal Rack NS Technical data for installation: Number of rack rows: 01 pcs. Length per rack row: approx. 11.500 mm Number of bays / rack row: 04 pcs. á 2.700 mm Number of levels plus floor level: 03 pcs. Included in delivery: Hodpfxem Eztis Ak Uofl 05x pallet rack uprights, used material color frame: sendz. galvanized material color framework: blue Profile dim.: 140 x 80 x 2.25 mm Incl. cross and diagonal braces, Base plates The stands are pre-assembled ( screwed truss ) 4.700 mm high 800 mm deep 24x pallet rack traverse, new Material color: Ral 2004 orange box profile: 130 x 50 mm type of cross beam: PNB 0413 S355MC agraffe: 4 HK (hooks) clear width: 2.700 mm max. load per truss pair 3.000 kg with evenly distributed load 48x safety pins, used execution: compl. galvanized To secure the longitudinal beams against unintentional lifting out 20x bolt anchor, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Design: carbon steel, galvanized Approved for: cracked concrete 10x shims, used execution: complete galvanized for levelling of the racks which are are placed on uneven ground 01x load plates with data of field and shelf loads, manufacturer and commission number Dimension: 297 x 210 x 2 mm

Condition: used, Year of construction: 2000, Overview  This complete PET bottling line was manufactured between 2000 and 2012 by a group of reputable European manufacturers, including SIG Corpoplast, KHS, Sacmi, Kisters, Paxona, and others. The line is suitable for still and carbonated soft drinks and includes a blow moulder, filler, labeller, packer, and various conveyor and inspection systems. The line reaches up to 36,000 bph at 1.5L and is available promptly. All machines are well maintained and include original components and relevant peripheral equipment. Technical data  - Capacity: - 36,000 bph at 1.5L water - 35,000 bph at 1.5L soft drinks (sweet) - 32,000 bph at 1.5L soft drinks (light) - Formats: - 0.5L and 1.5L bottles - PCO 28-1881 closure - Filling product: - Water and carbonated soft drinks (7.5g CO₂) - Closure system: - Screw caps, fed via chute and tipper (Zalkin + NSM) - Packing: - Shrink pack: 3x2 bottles (double lane) Hjdpfjwh U Avsx Ak Ujfl - Pallet type: - Euro (1,200 x 800 mm) - Düsseldorfer (600 x 800 mm) - Electrical specs: - 400 V / 50 Hz - Control systems: ABB, Siemens - Operating direction: Standard Scope of Delivery  - Blow moulder: SIG Corpoplast Blomax 24, year 2008 - 24 stations, heating oven with 20 boxes, ABB control - Incl. Preform tipper MD3, preform hopper SBT, elevator HFT, conveyor RGTD, chute ASTK - Air conveyor: NTS Mistral, year 2000 - Pneumatic adjustable rails, basket cable tray - Filler: KHS Innofill EV-VF, year 2000 - 176 electronic filling valves, valve manifold (APV), air conveyor, infeed worm, clamping star wheel - Screw capper (Zalkin, 22 heads), cap feeding (NSM), foam cleaning (ECOLAB, 2001), dosing units (2011) - Mixer / Deaeration: KHS Innopro DX65 Contimix 65/5-T20, year 2000 -  65,000 l/h, 5 components, Brix meter (Anton Paar), Hilge pumps - Labeller: Sacmi Opera 300 RF 26T/R S1E1, year 2012 - 26 plates, hotmelt, wrap-around, reel-fed, parallel infeed, safety lift version - Inspection & Coding: - Fill level and closure check: KHS Innocheck CUB Vision Circle, year 2013 - Bottle laser coding: Videojet with housing - Pack inspection: KHS Innocheck CUB, year 2015 - Packing machine: Kisters SP060V, year 2000 - Shrink-packer 3x2 (double lane), 60 cycles/min, manual lane width, foil only - Conveyors & Pack labelling: - Bottle conveyor: KHS Innoline BTR, year 2000, plastic chain, dry lubrication - Pack conveyor: Paxona + Schaefer, year 2009 - Pack labelling: Contact 100, self-adhesive label from reel

Condition: good (used), Note: This is a used steel locker. Slight damage (e.g., scratches, dents, dirt, or similar) may be present. The scope of delivery includes: 1x Steel locker with sloping roof, used Material color: gray Door color: gray Number of doors: 2 with ventilation grille Door handle: Turn-lock lock Overall width: approx. 610 mm Overall depth: approx. 500 mm Overall height: approx. 1,895 mm Weight: approx. 50.0 kg Locker compartment layout per door: Door handle: 1x Turn-lock lock Compartment dimensions: approx. 285 x 490 x 1,600 mm (W x D x H) Clothes rail: 1x | approx. 280 mm Hat base: approx. 285 x 307 x 400 mm (W x D x H) Hjdpfxewaa D Aj Ak Uefl Lockable with a padlock (Padlock not included) 1x Bench with shoe rack Dimensions: approx. 610 x 810 x 410 mm (W x D x H) Shoe rack dimensions: approx. 570 x 285 mm (W x D) Weight: approx. 15.0 kg Total dimensions: approx. 610 x 800 x 2,305 mm (W x D x H) Currently in stock: approx. 21 units. Your contact persons: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is available for pickup only. Any additional transport or shipping of this item will incur additional costs, which can be requested from us separately depending on the delivery location or scope of delivery.

Condition: used, Year of construction: 2007, UV dryer, Cefla UV 2000 - Manufacturer: Cefla/Sorbini - Model: UV 2000 M2 / TTE2500 - Year of manufacture: 2007 - Working width: 1,300 mm (1,445) mm - Working height: 900 ± 40 mm - Control panel on the right - Max. part height: 70 mm - Number of tubes from above: 2 - Straight-mounted tubes: 2 - Suitable for mercury tubes - Suitable for gallium tubes - Max. tube power: 120 W/cm - Bar transport - Length: 2,500 mm - Width 2,300 mm - Height 1,500 mm - Volts, Hz 400 / 50 - Total electrical connection 86 A / 36.4 kW - Voltage fluctuations max. +/- 5 % Images are examples of a machine of the same design* Hjdexn Nlvjpfx Ak Usfl

Condition: used, Year of construction: 2000, Overview This self-adhesive labelling machine was manufactured in 2000 by Germany KRONES. The Autocol 1200-20 TA is designed for the application of self-adhesive labels on bottles. The machine is configured with three labelling stations (front, back, and neck/seal label) and includes a Taxomat label feed system. It is suitable for standard beverage packaging applications and is equipped with an integrated Checkmat inspection system for quality control. The machine is currently still installed and will be available from February 2027. The unit is described as used and maintained based on operational requirements. Technical data - Capacity: up to approx. 15,000 bph Hfjdpfxey Azu Us Ak Uol - Formats: 0.5 L – 1.0 L (15 formats) - Application: Self-adhesive labelling of bottles - Configuration: 3 labelling stations (front / back / neck/seal) - Label positions: Front, back, neck/seal - Incl. Inspection system | KRONES | Checkmat

Condition: used, Year of construction: 2000, Overview The SAME barrel support cradles are V-shaped metal supports specifically designed for wineries, ensuring stable and secure positioning of oak barrels during storage, handling, and washing operations. Their geometry guarantees optimal load distribution and perfect barrel support, reducing stress on the barrel structure. SAME standard supports are fully compatible with automated barrel washing lines, making them ideal for professional cellar operations. Technical Data:  A total of 488 units are included in this lot. Key Features - Equipment Type: Barrel support cradles / sleepers for wineries - Design: V-shaped structure for secure barrel positioning - Barrel Capacity: 2 barrels per support - Compatible Barrel Sizes: 225 to 700 liters Hedpfjyiamrjx Ak Uefl - Manufacturing Process: Robotic MAG continuous wire welding - Structural Strength: High resistance to load, handling, and mechanical stress - Surface Finish: Oven-cured polyester powder coating - Compatibility: Suitable for automated barrel washing systems - Application: Wine cellar barrel storage and handling - Quantity: 488 units Dimensions (Standard 225 L Barrel Support) - Length: 1,430 mm - Width: 610 mm - Height: 364 mm

Condition: like new (used), Year of construction: 2020, machine/vehicle number: CL5058002, functionality: fully functional, operating hours: 9,000 h, power: 6 kW (8.16 HP), input voltage: 400 V, input frequency: 50 Hz, oil tank capacity: 800 l, overall weight: 800 kg, Equipment: CE marking, Specifications of the MULLER Combiloop CL5-800 150 high-pressure unit and filtration system, 800L/27L, 150 bars: - 800L capacity with level sensor - Centrifugal pump for supplying dirty fluid - Self-adjusting HP Eco+ pump, 150 bar/27L/min (5.5kW) - 8 controllable outputs, including one output for counter-spindle rinsing - 1 low-pressure pump with constant flow rate, 100L/min, 5 bar (1.2kW) - 1 low-pressure pump with constant flow rate, 80L/min, 3.5 bar (1.9kW) - Automatic 40μ filtration with automatic control and clogging detection - Complete high and low-pressure filtration - Pressure control for the part program - Whole oil (recommended viscosity for machining: 15-22 mm²/s; for deep drilling: 5-8 mm²/s) - Includes: EURO COLD RCFO 95t cooling unit - Excellent condition (very little use) Hfsdpfx Aszhi Nnsk Uol

Condition: used, Year of construction: 2000, Overview Hfsdpfxezd S Ixo Ak Uol This filling monoblock was manufactured in 2000 by Germany MAG Schymanski. The machine is designed for the hot filling of juice and non-carbonated beverages. The system is equipped with 28 filling valves and 4 capping heads. The machine is already dismantled and stored. Technical data - Capacity: approx. 3,500 – 6,000 bottles/hour - Formats: 0.5 L / 0.7 L / 1.0 L / 1.5 L - Application: Hot filling of juice and non-carbonated beverages - Configuration: 28 filling valves / 4 capping heads

Condition: new, Year of construction: 2025, Mechanical sheet metal guillotine METFORMER HCO-2x2000mm The guillotine is made entirely of steel, the structure is solid and heavy. Simple design with good looks. It is easy to use. This guillotine is widely used for cutting thin and medium steel sheets in light engineering, hardware manufacturing. The blade is made of a super strong steel alloy. Technical data: Model, HCO-2x2000, Engine power, kw, 3.0, Maximum sheet thickness (mm), mm, 2, Number of knife changes, pcs, 4, Length, mm, 2800, Hodsfwmydjpfx Ak Uofl Width, mm, 1260, Height, mm, 1300, Weight, kg, 1350,

Condition: used, Year of construction: 2000, Overview  The rinser cleans and sterilizes containers and was built in 2000 by the German manufacturer Krones. The machine has already been disassembled and put into storage.  Technical details  Capacity: up to 32.000 containers/ h  Number of rinsing stations: 50 (some of them are missing)  Running direction: counterclockwise Container: glass + plastic  Wetted parts in V2A  Central lubrication Extensive documentation available Electropneumatic valve control Siemens S7 control Voltage: 400 / 230 V Frequency: 50 Hz Control voltage: 24 V DC Hjdpfx Asn S A R Sok Uefl

Condition: good (used), Spindle diameter: 80 mm Spindle nose: SK50 Spindle speeds: 11 - 1000 RPM X-axis movement: 1700 mm Y-axis movement: 1800 mm Z-axis movement: 1800 mm Spindle out (W-axis): 710 mm Table size: 1100 x 900 mm Elbo Digital readout: On Y-axis and Z-axis Featured with: - Turning table - Toolholders Hfodpfx Akjphl Ece Ujl Spindle engine: 7,5 KW Machine LxWxH: 5100 x 2650 x 3300 mm Machine weight: 10 Ton

Condition: used, Available quantity: 4 units Manufacturer: MÜLLER Type: ZE 800-35.1.1 Year of manufacture: 1969 General overhaul: 2008 Pressing force: 8,000 kN Pulling force, press ram: 8,000 kN Ram stroke: 1,100 mm Ram surface area: 3,500 × 2,200 mm Max. dimension at the hydraulic clamps: 2,040 mm Hydraulic table cushion, one-piece: Displacement force: 250 – 2,500 kN Stroke: 85 – 300 mm Cushion surface area: 2,700 × 1,500 mm Hydraulic ram cushion, unregulated: Displacement force: 100 – 1,000 kN Stroke: 150 mm Cushion surface area: 2,400 × 1,500 mm Distance, table – ram TDC: 2,200 mm Distance, table – ram BDC: 1,100 mm Table clamping surface: 3,500 × 2,200 mm Clearance between guides: 3,550 mm Max. tool weight: 32 t Equipment: Punch impact damper Hfedpfx Aszw Nq Dsk Usl Speeds: Rapid descent speed: max. 500 mm/s, unregulated Working speed: 5 – 140 mm/s Return speed: 30 – 420 mm/s Operating modes, table cushion: Return without locking, followed by ejection Return with locking and delayed ejection Operation with the pull cushion deactivated is possible Documentation: No digital data available Drawings: Partially available as ink drawings; on-site inspection possible Packing lists: No packing lists with individual weights available