Used John Deere Lawn Mower Blades, 48 Pieces for sale (18,259)

Condition: good (used), Year of construction: 1998, Motor power [kW]: 150 (2x75) Number of blades on the shaft: 48 (2x24) Blades [mm]: 80x80x45 mm (reinforced/extended mounting threads). New, square. 4 blades, of which 3 blades are 100% and 1 blade is approximately 70% new Rotor: Shaft width [mm]: 2,100 Number of shafts: 2 Lasdpfx Asibzbhsbzsg Shaft diameter: 500 mm Shaft speed [rpm]: 75-165 Screen diameter [mm]: 30 mm Chamber dimensions [mm]: 2,100 x 1,250 Automatic start: Soft start Rated voltage: 3 x 400 V/50 Hz Rated current: 160 A-200 A Automation: Siemens Simatic Weight [kg]: approx. 14,500 Dimensions: Length [mm]: 3,850 Width [mm]: 2,720 Height [mm]: 2,700 Documentation: German 2014 A complete overhaul was carried out. A list of these parts and pictures are available upon request. This machine has not been used for several years (since then - one owner). Previously, it processed plastic, film, and cardboard - RDF after selective recycling. The approximate throughput for materials like the above (lightweight) is about 1-1.5 tons/hour. Other materials - to be checked/discussed. The machine was fully functional and is currently stored on site. Additional photos and video available upon request.

Condition: ready for operation (used), Year of construction: 1987, machine/vehicle number: 402, functionality: fully functional, cutting height (max.): 70 mm, cutting width (max.): 3,200 mm, saw blade diameter: 300 mm, cutting length (max.): 3,200 mm, cutting height with scoring (max.): 70 mm, Equipment: scorer, Cutting length: 3200 mm Cutting width: 3200 mm Width stop: Gear motor adjustment Main saw unit: saw blade Ø 300, Ø 30, Z=60, SH 70 Scoring unit: yes - saw blade Ø 125, Ø 20, Z=24 Softforming unit: no Side pressure unit: yes - Version: FR 50/100 Residual cutting device: yes - Pressure beam recess Veneer cutting device: yes Trimming device: yes - Spacing: 145/525/1790 Support table front: 400 x 1400 mm - 2 pieces Rear support table: 240 x 2960 mm - 1 piece Support bars rear: 40 x 2960 mm - 5 pieces Angled table: 480 x 1400 mm left Angle ruler: with pull-out Collets: 4 pieces - floating - distance 70/400/1600/2800 Stop jaw: 2 pieces - rigid - distance 1000/2200 additional foot at the rear : no - 3 feet safety guard: yes foot switch : no Machine cuts from: left to right unit can emerge in any area: no automatic lowering with saw overtravel: no Lasdpfevi H Disx Abzsg 3-step cutting height adjustment: no Main circular saw: 7.5 kW, 380 V, 2870 rpm, 50 Hz Scoring saw: 1.1 kW, 380 V, 2800 rpm, 50 Hz Width stop adjustment motor with torque compensation: fine input motor: 0.12 kW, 380 V, 1380 /min, main motor: 0.35 kW, 380 V, 1350n.

Condition: used, Year of construction: 1993, functionality: fully functional, Semi-automatic miter circular saw Manufacturer: Eisele, Model: PSU 450 H Year of manufacture: 1993 Technical data Manufacturer: Eisele Model: PSU 450 H Year of manufacture: 1993 Saw blade diameter: 450 mm Cutting diameter: 150 mm Total power consumption: 3.0 / 3.6 kW Voltage: 380 V, 50 Hz Speeds min-1: Gearbox 6 / 12 / 24 / 48 min-1 Motor: 1400 / 2800 min-1 Machine dimensions: L 1 x W 1.4 x H 1.9 m + roller conveyor Machine weight: approx. 1.5 t Equipment Lajdpfxez Dgrio Abzog • Miter setting with fixed stops at 30°, 45° and 90° • Hydraulic clamping device • 2 hydraulic retraction arms • Motorized miter setting • Roller conveyor on the left: 2 m • Roller conveyor on the right with stop: 2 m • Stepless cutting speed adjustment • Coolant system All information is subject to change without notice. A demonstration is possible at any time in our showroom.

Condition: used, functionality: fully functional, LENZKES Clamping System Package Upper components: 6 pieces, width = 60 mm, groove = 18 mm, length = 125 mm, height = 130 mm 6 pieces, width = 60 mm, groove = 18 mm, length = 125 mm, height = 70 mm 4 pieces, width = 90 mm, groove = 28 mm, length = 180 mm, height = 110 mm 4 pieces, width = 90 mm, groove = 28 mm, length = 180 mm, height = 200 mm Lower components: 3 pieces, width = 60 mm, length = 150 mm, height = 250 mm 3 pieces, width = 60 mm, length = 150 mm, height = 160 mm Adjustable force clamps: 5 pieces, width = 60 mm, length = 130 mm, height = 42 mm 3 pieces, width = 60 mm, length = 110 mm, height = 42 mm 12 pieces, width = 60 mm, length = 90 mm, height = 42 mm 6 pieces, width = 52 mm, length = 127 mm, height = 35 mm 3 pieces, width = 52 mm, length = 87 mm, height = 37 mm Laedpfozyk Suex Abzeg 14 pieces, width = 52 mm, length = 76 mm, height = 37 mm 2 pieces, width = 75 mm, length = 48 mm, height = 160 mm 4 pieces, width = 75 mm, length = 48 mm, height = 110 mm Free addition: Various clamping jaws (7 pieces complete + 5 pieces accessories) AMF clamping jaws (comparable with Lenzkes) AMF No. 6321/17 4 pieces, width = 50 mm, length = 140 mm, height = 50 mm incl. clamping screws M12

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, operating hours: 3,000 h, SCM Accord 40 fx – CNC Machining Center for Timber Construction (Complete description available in the attachment) Used Machine, Year of Manufacture: 10/2022 Consisting of: - R21431 Accord 40 fx – Working field X-Y = 9000 x 1905 mm, Z = 350 mm, quantity: 1 - OF0158 Usable pass-through height Z = 350 mm (with H50 vacuum cups), quantity: 1 - OF0165 Traversing speed on all axes, Accord 40 fx (PRO-SPEED version), quantity: 1 - OF0168 Pendulum operation, quantity: 1 - OF0169 Automatic axis lubrication, quantity: 1 - OF0299 TELESOLVE remote maintenance via Internet, quantity: 1 - 450328 eye-M PRO operation console with integrated PC, quantity: 1 - 450291 Additional fixed operator panel, quantity: 1 - 870068 TECPAD – remote control for machine functions, quantity: 1 Lsdpfx Aoyzgxcobzeag - 560058 No. 10 MATIC support rails, L1825, quantity: 1 - 230237 MAXI working unit – Prisma T, quantity: 1 - 870031 Chip hood on the electric spindle, adjustable, quantity: 1 - 870109 Preparation for angle gear "Prisma T-S", quantity: 1 - 470014 Air nozzle for tools, quantity: 1 - 870119 Tool length measuring device, quantity: 1 - 870016 BRC working unit, quantity: 1 - 510014 Jaw preparation H145 for worktable with 10 support rails, quantity: 1 - 480178 Front stop row H110 for worktable with 10 support rails, quantity: 1 - 480105 Rear stop row H110 for worktable with 10 support rails, quantity: 1 - 480137 First lateral stop row H110 for worktable with 10 support rails, quantity: 1 - 480005 Vacuum cup H110 145x145 mm, quantity: 12 - 480006 Rotatable vacuum cup H110 145x55 mm, quantity: 8 - 480018 Rotatable vacuum cup H110 145x30 mm, quantity: 5 - 480049 Rotatable vacuum cup H110 200x40 mm, quantity: 5 - 480149 First lateral stop row H145 for worktable with 10 support rails, quantity: 1 - 480153 Second lateral stop row H145 for worktable with 10 support rails, quantity: 1 - 480107 Round pneumatic clamping cylinders H145, quantity: 8 - 480108 Square pneumatic clamping cylinders H145, quantity: 30 - 480111 No. 6 lifting devices with double stroke H145, quantity: 1 - 450289 Laser and reference stop H145 for arcs (left), quantity: 1 - 350016 Vacuum pump 250 (300) m³/h – 50 (60) Hz, quantity: 1 - 190046 PRO-SPEED safety system, quantity: 1 - 210057 TRC 48 – rear-side tool magazine, quantity: 1 - 210190 MACH 5 – quick-change system, quantity: 1 - 870236 RTCP setting – self-calibration system for Prisma working unit, quantity: 1 - Air conditioning for the control cabinet, quantity: 1 - 450288 Safety enclosure with vertical ON-OFF adjustment, quantity: 1 - 210852 SCM angle head HSK 63E – underfloor milling unit, quantity: 1 - OF0438 Human-machine interface software (HMI) MAESTRO ACTIVE, quantity: 1 - OF0543 Operating system Windows 10 embedded 64 bit, quantity: 1 - OF0422 Machine control interface software Maestro cnc, quantity: 1 - OF0435 Hardware dongle for Maestro cnc, quantity: 1 - 524309 Maestro 3D-Advanced module, quantity: 1 - 630359 Additional hardware dongle for Maestro cnc (for USB port), quantity: 1 - 523687 ProView simulation software, quantity: 1 - 109993 MACHINE LANGUAGE: German, quantity: 1 - SPEC01 Special design – Special Accord 9 meter processing in X - SPEC02 Special design – 2 pieces push-in double-stroke aids H145 - SPEC03 Special design – Spare spindle Maxi-Prisma-T

Condition: excellent (used), Working area X: 5,920 mm Working area Y: 1,287 mm Working area Z: 170 mm C, A axes: available Swivel machining: 2 working areas for swivel machining Work table: ATS-HTS-EPS Automatic console positioning system EPS 10 automatically positionable consoles 2 locating pins per console 5-axis milling spindle: Power: 9 kW / 11 kW at 60 Hz Speed: up to 24,000 rpm Tool holder: HSK-F63 Liquid-cooled Drilling head BH 26 16 vertical drilling spindles 4 horizontal drilling spindles in the X direction 2 grooving units for grooves in the X and Y directions Vertical drilling spindles 16, Horizontal drilling spindle X = Tool changer: Chain tool changer with 21 tool positions Clamping systems: Uniclamp clamping system - 6 pieces Control system: BIESSE XP 600 Chip removal: Motorized conveyor belts for the removal of chips and machining waste Vacuum pump BECKER: Motor power 5.5 kW Conveying capacity: 244/286 m³/h Additional equipment: Numerous vacuum suction cups; 6 UNICLAMP clamping systems; Numerous HSK 63 tool holders; 2 large saw blades in the tool magazine Compressed air: 7-7.5 bar Total power: 25.3 kW Laodpfjzxbhwjx Abzeg Weight: 4200 kg

Condition: used, functionality: fully functional, power: 26 kW (35.35 HP), first registration: 09/2015, fuel type: diesel, color: red, axle configuration: 4x4, operation weight: 1,500 kg, fuel: diesel, driver cabin: day cab, gearing type: hydrostat, Year of construction: 2015, operating hours: 2,398 h, Equipment: additional headlights, air conditioning, all wheel drive, hydraulics, Self-propelled work machine, mower: + Toro + Groundsmaster 360 + Year of manufacture: 2015 + 2,398 operating hours + 4-cylinder Kubota diesel engine, 1,498 cc, 35 HP + All-wheel drive + Selectable all-wheel steering + Hydrostatic drive, max speed 20 km/h + Front and mid-mount lift arms + Front hydraulics + PTO (power take-off) + Beacon lights + Full cab with opening windows + Air conditioning / heating + Hand throttle + Toro rotary mower deck with 3 blades, 180 cm cutting width Optional: + Müthing front mulcher + Type MU-FM + 160 cm working width + 240 kg + Year of manufacture: 2015 Municipal vehicle from first owner Receive all newly listed vehicles by email – sign up for our NEWSLETTER! Laodpfx Abox E R Enozjg Errors and typos excepted, subject to prior sale!

Year of construction: 2020, condition: good (used), approx. 8 - 10 pcs. continuous scales / automatic scales for use in a conveyor system, Mettler Toledo - second-hand - used Price per piece: 2.950.-€ ex site (net), disassembled, packed and loaded! Manufacturer: Mettler Toledo For example (a more detailed list will follow) Item 48 Automatic scale Year of manufacture: 2020 Type: C 21 TLW250Corgo Max. 35.000gram Min: 100gram T= - 35.000gr 230V Belt width: approx. 49cm Element width: approx. 55cm Length: 1.07m Terminal / Dísplay: ICS469d-cargo ICS4x9-1 110-240V - 50/60Hz, 300mA Still without pos: Automatic scale Year of manufacture: 2014 Type: ICS469-100 Max. 40.000gram Min: 200gram D= 5gr T= - 40.000gr 230V Laedpfx Absq U Rq Hezeg Still without pos. (hangs under the ceiling): Automatic scale Year of construction: 20? Type: C21 TLW250 Cargo Type: LCC300 Max. 300kg Min: 200gram D= 5gr T= - 40.000gr 230V

Condition: good (used), Year of construction: 2012, fuel type: diesel, General information Field of application: Construction Weights Empty weight: 2.172 kg Functional Generator capacity: 60 kVA CE mark: yes Condition Technical condition: good Visual appearance: good Other information Fuel consumption: Diesel Delivery terms: EXW Water tank volume: 390 l Additional information Please contact Christian Theißen for more information Manufacturer: SDMO Model: R66C2 Year of build: 2012 Condition: Used Data: Performance: 60 kVA Lajdpex H Nlisfx Abzog Engine: John Deere Length: 234 cm Width: 108 cm Height: 190 cm Tank capacity: 39 l / Diesel Required connection: 2x 230 V/16 A, 1x 380 V/16 A, 1x 380 V, 63 Ao. Klemmleiste. Drive type: Diesel Operating noise: 88 dB Own weight: 2.172 kg Weight: betankt 2.500 kg Own weight: 2.172 kg Special features: Lifting eye, consumption of approximately 14.75 liters per hour. On Weijer trailer. Location: 41468 Neuss immediately available

Condition: used, functionality: fully functional, Year of construction: 2007, operating hours: 5,000 h, load capacity: 4,500 kg, lifting height: 10,000 mm, fuel type: diesel, mast type: telescopic, construction height: 2,450 mm, power: 80 kW (108.77 HP), empty load weight: 13,000 kg, total length: 7,000 mm, drive type: Diesel, construction width: 2,300 mm, Telescopic forklift, rigid frame Mast type: Telescopic Condition: Ready for operation and fully functional Laodpfx Abez Dzdyszsg Technical condition: good Front tire type: Air Front tire condition: 20 - 40% Rear tire type: Air Rear tire condition: 20 - 40% Description: LIEBHERR TL445-10 telescopic handler - - 4.5-ton lifting capacity - - 10m lifting height - - Year of manufacture 2007 - - 5000 operating hours according to display - - 2-speed hydrostatic drive - - hydraulic quick coupler - - 4-cylinder John Deere diesel engine, 108 hp - - 4-wheel steering - - 4-wheel drive - - 3 steering modes - - 13,000 kg operating weight - - Overall height 2.45m - - Width 1.30m - - Length 7m - - Tires approximately 40% remaining - - Includes used pallet fork - - Very maneuverable handler - - Telescopic forklift in good condition - - Used bucket, 3 m³, available for an additional charge of 1500 euros!! - - Inspection and test drive are welcome - - Includes CE Declaration of Conformity + operating manual - - Delivery possible. Quick coupler, 3rd valve, 4th valve, heater, full cab, CE certificate

Year of construction: 2020, condition: excellent (used), Fine impact mill, hammer mill, pin mill, pulverizer, side mill, granulator, shredder, powder mill, granulate mill, granulator, rotor mill, recycling technology, agglomerator -Condition: The machine was a demonstration unit, equipped without a control system. -Manufacturer: WIPA, Hammer mill -Type: WPZ 750-45 -Drive motor: 45 kW -Number of mallets: 4 pieces -Number of counter blades: 6 pieces -Ejection: Height adjustable Quantity: 1 piece available -Dimensions: 1730/220/H3200 mm -Transport dimensions: 1370/220/H1730, 1400/800/H1470 mm Lajdpezbk Iyofx Abzeg -Weight: 1900 kg

Condition: as good as new (ex-display), Year of construction: 2025, Machine is in the exhibition. Optimill F 110 HSC Premium CNC milling machine direct from the manufacturer. F 110 HSC - The OPTIMUM Premium CNC milling machine with Siemens SINUMERIK 828D control is characterized by performance, speed, precision and a long service life. - Heavy-duty design - High productivity - High reliability - Heavily ribbed, torsion-free machine base - Profiled rail with recirculating ball bearing for high rapid traverse speeds in all axes - High-torque servo drives in all three axes - Telescopic guideway cover on all three axes - Automatic lubrication - Massive, exact milling table with three T-slots, large dimensions and precision-ground - The portable, electronic handwheel with enabling switch and emergency stop switch makes it much easier to the run-in of programs considerably - Coolant device with chip flushing system and cleaning gun - Chip conveyor in belt design ensures efficient chip removal - Chip trolley - RJ45 plug connection and 230 V power connection - Closed switch cabinet with integrated heat exchanger ensures optimum temperature and prevents the ingress of dirt particles - Machine light in the work area - Additional package SIEMENS material liability for defects and free online/on-site service OSS Plus - 1-year Basic maintenance contract included in D/A/CH Milling spindle Inline spindle Machine data Lsdsymka Hjpfx Abzjag Electrical connection 400 V / ~50 Hz Total connected load 15 kVA Milling spindle Drive motor S1 operation 9 kW Torque drive motor S1 operation 57 Nm Drive motor S6-30% operation 21.2 kw Torque drive motor S6-30% operation 135 Nm Spindle holder SK 40 / DIN 69871 Internal spindle cooling option Drive motor S1 operation 10.5 kW Torque drive motor S1 operation 50 Nm Drive motor S6-30% operation 26.4 kW Torque drive motor S6-30% operation 125 Nm Cooling lubricant system Power of the coolant pumps, 2 pieces 900 W Delivery rate max. 35 l/min. Tank capacity 116 liters Cleaning pump Power of the cleaning pump 530 W Milling accuracy Repeat accuracy ± 0.005 mm Positioning accuracy ± 0.005 mm Tool changer Double arm gripper type Number of tool positions 20 Tool diameter max. 78 mm Tool diameter (secondary positions free) max. 120 mm Tool length 300 mm Tool weight max. 8 kg Time tool change: tool to tool 2.5 seconds Travel distance X-axis 650 mm Y-axis 400 mm Z-axis 500 mm Feed drive Rapid traverse X-, Y-, Z-axis 48 / 48 / 32 m/min. Motor torque X- / Y- / Z-axis 11 Nm / 11 Nm / 20 Nm Feed forces X- / Y- / Z-axis 3.67 kN / 3.67 kN / 6.68 kN Speed range Speeds* 12,000 min-1 Pneumatics Air pressure 6 bar Air consumption per hour 6 - 8 kg/m³ Milling table Distance spindle - table 100 - 600 mm Table length x width 850 x 400 mm T-slot size / number / distance 18 mm / 3 / 100 mm Max. load 400 kg Dimensions Length x width x height 2,100 x 2,300 x 2,750 mm Total weight 4,300 kg

Condition: excellent (used), Year of construction: 2016, Construction compressor Manufacturer: Atlas Copco Model: XAVS 186 Lajdewubzrjpfx Abzog Year of manufacture: 2016 Operating hours: approx. 657 h - Delivery pressure: max. 14 bar - Flow rate: max. 11.4 m³/h - Power: 104 kW - Engine: John Deere 4045HAC05 - Aftercooler - Water separator - Weight: approx. 2.45 t

Condition: good (used), Year of construction: 2014, functionality: fully functional, System consisting of: PANEL SAW SELCO WNT 610 / 4500 x 2200 mm PC-BASED CONTROL SYSTEM Max. cutting length: 4,500 mm Max. saw blade projection (main saw): 95 mm Max. opening of clamping grippers: 90 mm Min. panel dimensions from rear: 1,830 x 915 mm Max. panel dimensions from rear: 3,100 x 2,200 mm Min. panel thickness for rear feeding: 3 mm Worktable height: 985 mm Main saw motor: 15 kW Main saw blade diameter: 380 mm Scoring saw motor: 2.2 kW Scoring saw blade diameter: 200 mm DIGISET: electronic adjustment of scoring saw to main saw QUICK CHANGE: fast blade change at the push of a button Saw carriage drive: 1 - 140 m/min Integrated side aligner in saw carriage: 0 - 4,200 mm Automatic measuring system for manual cuts Pusher extension from 5,500 to 7,800 mm 10 pneumatic clamping grippers on pusher with double fingers 3 front aligners 16 support roller tracks behind the machine table 4 air-cushion tables in front of the machine table, rounded, including movement device for table 2 Automatic ejection of end pieces beyond the cutting line Material support area under the pusher equipped with brush rollers for sensitive surfaces Machine table with air nozzles for sensitive surfaces Automatic device for monitoring the main saw blade consisting of a sensor that detects blade deflection and a system for measuring main spindle speed Software package: QUICKOPTI for optimizing cutting plans directly on the machine OSI PLUS INTERFACE VERSION OPTIPLANNING OPTIMIZATION SOFTWARE incl. hardware dongle, allows management of up to 10 users via network OS LABELLING: graphical editor on the machine control system with workpiece drawings, real-time label printing directly at the machine possible COMMUNICATION BETWEEN STORAGE FEED SYSTEM AND SELCO Industrial label printer at the machine STORAGE FEED SYSTEM RBO WINSTORE 2D STANDARD TRAVERSE 8000 MM Swiveling suction frame 0 - 180 degrees with controlled axis Panel alignment/squareness correction system consisting of 3 photocells mounted on pneumatic cylinders Panel weight detection via load cell mounted on the suction frame in the separation area, Laodpfoxranpex Abzeg checks whether the specified weight value is within the expected range for this panel type. If not, the panel is set down again and the separation cycle restarts. Roller conveyor for stacking and unstacking: 4,200 mm Software: LINE SUPERVISOR with warehouse mapping, catalog, import of machining data from the optimizer, management of BOMs, plant control

Condition: like new (used), functionality: fully functional, power: 94 kW (127.80 HP), fuel type: diesel, overall weight: 34,000 kg, Year of construction: 2022, operating hours: 1,238 h, Output capacity up to: approx. 500 t/h Maximum feed size: 800 x 500 x 300 mm Feed height: approx. 3,570 mm Feed height with rear wall folded down: 2,830 mm Hopper volume: 9.1 m³ Hopper discharge belt width x length: 1,400 x 4,500 mm Screening type: double-deck heavy-duty screen Screen area upper deck: 1,550 x 4,880 mm (W x L) Screen area lower deck: 1,550 x 4,500 mm (W x L) Fine material conveyor width x length: 1,200 x 4,380 mm Fine material discharge conveyor width / length / discharge height: 900 x 7,760 / 2,960 to 3,980 mm Medium grain discharge conveyor width / length / discharge height: 900 x 7,760 / 2,310 to 3,630 mm Oversize discharge conveyor width / length / discharge height: 1,400 x 6,065 / 2,650 to 4,050 mm Drive concept: diesel-hydraulic Lodpsxl Szzsfx Abzsag Engine manufacturer: John Deere Drive unit power: 94-98 kW Transport dimensions: 15,840 x 3,000 x 3,400 mm (L x W x H) Transport weight: 34,000 kg

Condition: as good as new (ex-display), Year of construction: 2024, type of input current: DC, cutting height (max.): 285 mm, cutting range round steel at 45°: 230 mm, cutting range round steel at 90°: 250 mm, saw band length: 2,950 mm, saw band width: 27 mm, Title MEP SHARK 282 CCS [with semi-automatic lowering] Article number SH282CCS Ledpfx Abjzzkthszsag Motor power 1.5/1.8 kW Belt opening 285 mm Belt dimensions 2950x27x0.9 mm Weight 440 kg Speed 36/72 m/min. Cutting surface 0° 250 / 220x220 / 280x220 Cutting surface 45° right 230 / 200x200 / 220x200 Cutting surface 45° left 200 / 170x170 / 200x140 Cutting surface 60° right 120 / 80x80 / 140x80 Cutting surface 60° left Description MEP sawing machine: Basic equipment: Vice with quick adjustment and adjustable guide rails Hydraulic band clamping device with clamping pressure indicator Underframe with removable coolant tray Chip clearing brush Adjusted precision stops for cuts of 0°, 45° and 60° left and 45° right Length stop for cuts of the same length Material support arm, simultaneous connection option for roller conveyor/loading side Turntable for double mitre cuts Machine is designed for pallet truck/forklift transport M2 bi-metal band saw blade for solid and profiled material Tools and operating instructions Electrical equipment: Control panel labeled cable connections Control lamp for operational readiness Main safety switch Emergency stop button Speed changeover switch Thermomagnetic protection Undervoltage release Control handle IP 55 protected Phase comparator Low voltage system 24 Volt Electrical coolant system 48 V (attachment of a micro-spraying device possible) Motor 1.5/1.8 KW 2 speeds 36/72 m/min. Vice opening 285 Saw band 2950 x 27 x 0.9 Weight 440 kg

Condition: excellent (used), functionality: fully functional, 1. Mawera PS silo discharge system, in very good condition. 2. Weiss silo discharge system with chain. Year of manufacture: 1989, very robust design. Already dismantled. Arm length: 3 m. Motor: 5 kW. Ledozv Eiajpfx Abzsag 3. Mawera SST hydraulic silo discharge system with 2 push rods, length: 14.5 m / piece. With hydraulic cylinders, unit, documentation, etc. The Mawera SST two-beam, hydraulically operated discharge system is used for the uniform and continuous discharge of wood chips from a rectangular silo. The slides or shovels move the material in alternating strokes to feed the boiler. Silo length: • Design with 12 slides: 14.50 m Internal width of the silo: 4.24 m Shovel blade width: 900 mm, shovel depth: 250 mm, shovel height: 70 mm 4. Mawera RSS spring arm silo discharge system: Design: Rotating silo discharge system with spring arms. Application area: Discharge of wood chips, wood shavings, sawdust, and biomass fuels. The rotating arms located on the silo floor convey the fuel to the central discharge point. Outlet: Central discharge opening / transition to a further conveying system.

Condition: like new (used), Year of construction: 2022, Used HMZ-3 FR CNC miter saw with routing unit The miter line consists of: - a miter saw with a 5.5 KW braked motor and a 700 mm saw blade; - an infeed roller conveyor with a working length of 6,500 mm and a pusher unit; - an outfeed roller conveyor with a length of 6,000 mm; Laodpfxozg Il Ss Abzjg - an industrial computer with a 17” LCD color screen; - computer-controlled axes; - optimization software for importing Tekla/HSB CAD files, etc. Saw machine specifications: - motor power 5.5 KW; - saw blade diameter 700 mm, saw height 250 mm; - angle adjustment from 0 to 270 degrees; - noise level 81 dB; - combined guard/sound hood over the entire saw; - 2 dust extraction ports; - pneumatic material guiding system for the saw; - centerline adjustment 200 mm Infeed conveyor specifications: - robust steel construction. - working length 6,500 mm (- rollers with a diameter of approximately 50 mm and a load-bearing capacity of 125 kg each). - adjustable feet, 100 mm adjustment range. Outfeed conveyor specifications: - robust steel construction. - approximately 6,000 mm long. - equipped with an automatic scrap chute. Automatic positioning unit specifications: - reading accuracy selectable: 1 or 0.1 mm. - positioning accuracy plus or minus 0.2 mm. - speed up to 80 m/min. - Servo motor with rack and pinion, driven by a frequency inverter. - steel guide with 8 adjustable bearings. Computer specifications: - Industrial computer with a 19” LCD touchscreen. - hard drive 200 Gb, and USB port. - network card and Windows 10. - special, H&M-developed, Dutch-language Windows software. - graphical display of the cutting pattern. - control from the office via a network or by importing a drawing program, e.g., HSB CAD. - integrated optimization module. Operation: A cutting list is created or called up on the control computer and activated. Then, the available lengths and quantities can be specified, so that the machine can optimize the cutting process. After that, the saw can be started, and the machine requests the desired length. The pusher is in the starting position, and the control system requests the correct length. After a start command is given, the pusher starts and the beam is pushed through the machine and automatically cut to the desired specifications. The cut product ends up on the outfeed table. Additional options on the machine: - Label printer with software and stand. - Supports for the saw (8 pieces). Routing unit The saw is combined with a routing unit with a 90-degree (vertical) stroke. Max. reach: - 150mm. Height - 120mm. Depth Dust extraction port for routing unit: 100mm.

Condition: good (used), Year of construction: 1980, Joint cutter, diesel joint cutter, asphalt cutter Laodpfxob A Hv De Abzeg -Saw blades: 2 pieces -Saw blade diameter: 500 mm -Cutting depth: approx. 180 mm -Working width: 425 mm -Hatz diesel engine: 25 kW -E-Start -infinitely variable feed

Condition: excellent (used), power: 129 kW (175.39 HP), operation weight: 18,800 kg, Year of construction: 2014, operating hours: 14,245 h, Equipment: air conditioning, cabin, CATERPILLAR M320F year: 2014 operation hours: 14.245 hrs. ROPS Airco Radio Back drive camera hydr. 2 piece boom stick: 2,50 meter all hydr. lines (hammer-, gripper-, scissor-) Pre-configured for the Trimble GCS900 Quick coupler OQ65 1 x Bucket with 800mm width central lubrication Camso tyres 10.00-20 approx 50% good blade support ( 2.5m width) CE Engine with 129kW Transport : 9x2.5x3.30m Lasdpozud Apefx Abzog operation weight: 18.8 to.

Condition: used, Year of construction: 1981, cutting diameter 320 mm saw band length 4670 mm cutting width 580 mm total power requirement 7,4 kW weight of the machine ca. 3 t Sawing range, circular, max. 100 - 320 mm vertical, max. 100/100 x 320/460 mm Length of cut, min./max. 0 - 580 mm Distance from column to saw band, max. 690 mm Cutting speed, infinitely variable 16 - 160 m/min Dimensions of saw band, length x Ø approx. 4,670 x 38 mm Length of remaining pieces, automatic/single cut 100/10 mm Saw blade drive, approx. 4.4 kW Total electrical load, approx. 7.4 kW - 380 V - 50 Hz Weight, approx. 3,000 kg Laedpfx Abjt Hwrnszsg Accessories / Special Features: * Infinitely variable speeds of saw blade motor via servo motor and STOEBER drive. Display of cutting speed on control panel. * Infinitely variable settings of sawing feed with display of the current cutting speed. * Workpiece counter: Number of workpieces can be preset. Selection switch for single cuts / multiple cuts. * Display for band tension and cutting feed. * Automatic motor-driven material feed, controlled by a positioning processor, Model PP 160, with input of the appropriate lengths using a roll conveyor approx. 1,500 mm, with enlargement approx. 2,000 mm. And with a stable roll conveyor for the exterior area, 3,500 mm. * Built-in chip conveyor with coolant device. * Built-on switch cabinet. Condition : Good. Machine can soon be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract. Thank you for your interest. We have a selection of saws on stock. Please let us know your requirements.

Condition: good (used), Year of construction: 2004, functionality: fully functional, Heavy-duty, fully hydraulic CNC bandsaw machine Ledjzl Ulpopfx Abzeag for automatic and economical cutting of solid and profile materials. Key features: - Cutting range: round 410 mm or flat 410 x 410 mm - Modern 2-axis CNC control - Bandsaw blade monitoring with automatic feed rate adjustment - Inching function for the first cut, 15 mm min. remaining piece length - Stepless, frequency-controlled saw drive - Clamping pressure adjustment for thin-walled tubes and profiles - Hydraulically driven chip conveyor - Automatic double-sided bandsaw blade lifting device - Hydraulic bandsaw blade tensioning - Material feed via precision ball screw and linear guide Drive power: 5.5 kW Working height: 730 mm Paint finish: plating gray RAL 7036 and turquoise RAL 5018 Includes 1 bi-metal bandsaw blade 6150 x 41 x 1.3 mm

Condition: good (used), functionality: fully functional, type of input current: three-phase, A very nice machine with the added benefit of the infeed wheel (or roller) on the Centauro R800 resaw acts as a mechanical hand. It pushes wood into the blade. This creates even cuts and smooth surfaces. It also helps you safely cut very thin, uniform pieces. Lajdpfszifn Ajx Abzeg

Condition: ready for operation (used), Year of construction: 1994, functionality: fully functional, For sale: KOCH net saw—optimized for fast and precise trimming of furniture components, especially drawer sides. The machine ensures a clean, net cut (with no tears or edge defects)—a solution significantly faster than cutting on panel saws. Key features and specifications: - PLC control—automatic operation (separately retrofitted) - Buffer magazine for workpieces - Pusher beam on hydraulic system—feeds part to next operation - Maximum machine span: 2 m - Maximum feed speed: 12 m/min - Drive can be activated from both sides of the machine - Top scoring saw blades for cutting components from above - Spindle speed approx. 4,500–5,000 rpm (motors: 2,100 rpm) - Complete safety covers and safety sensors - Ready production of 'drawer ribbon' (final-sized drawer banding) The top saws are used for producing complete drawer bands (ready-to-install components). Example: a 640 mm long piece is surfaced/truncated from above and divided into 3 parts, so by adding the drawer front and bottom, you have a finished drawer without any additional side processing. Performance: For a sample drawer side (350 x 100 mm): approx. 25,000–30,000 pieces per shift (highly efficient production). Location: Elbląg Loading is the responsibility of the buyer/assistance available on site. Please feel free to get in touch—I’ll be happy to answer any questions. Lsdpsyyyfyefx Abzjag

Condition: excellent (used), Catalog number: 8095 TECHNICAL DATA - track width: 240mm - roller width: 240mm - max. disc diameter: 350mm - disc bore diameter: 80mm - max. cutting height: 120mm - table width with clearance: 690mm - table length: 1800mm – from above: - pawls/ejectors - sliding/pressure roller: 1 piece - pawls/ejectors - sliding roller - saw arbor Lajdpjzx U N Iefx Abzsg - sliding/pressure roller: 2 pieces – from below: - guide - infeed/sliding roller - pawls - track - electric adjustment of the machine body up/down - stepless feed speed adjustment: 4-40m/min - feed motor: 2kW - main motor: 22kW - central lubrication - diameter of the dust extraction port: 200mm - overall dimensions (L/W/H): 2020x1530x1640mm - weight: approx. 2000kg ADVANTAGES – made in the Czech Republic – electric adjustment of the machine body up/down – multi-blade saw, used – very good condition Net price: 35,900 PLN Net price: 8,548 EUR, depending on the exchange rate of 4.20 EUR (Prices are subject to change due to significant fluctuations)