Used Jam Hyp 1000 10Ton for sale (8,852)

Condition: used, Year of construction: 2018, Overview  The offered filling line for pouch bags was designed by a Swiss company and also delivered by them in 2018. The main manufacturer is Linapack. The line was only used for seasonal production only (2 months a year), therefore the working hours are very low. As the sales volumes are not further increasing, the seller decided to sell the line and stop the production. The line is still assembled and can be shown. It is possible to handle different formats of pouch bags and to do hot filling up to 85°C. The current owner used it for Cocktails but it can also be used for various other non carbonated drinks. Tech. Details - Capacity: - 50 bags/ hour, depending on the volume - 750 -900 l/h - Bag dimensions - Width: 80 - 180mm - Height: 100 - 300mm - Filling temperature: 71 - 85 °C - Siemens PLC Line consists of  - 1,000 l buffer tank - agitator - Flow meter - Level detection - Cleaning spray ball - Integrated into pasteurizer control system - Flash pasteurizer Kreuzmayr PAS-900 - Capacity: 750 - 1,000 l/h - Heated with steam - Fully automatic - Automatic cleaning with - Hot water - steam - acid - caustic - With tubular heat exchanger - Automatic filler Linapack LFS-1000 Duplex - with Siemens PLC - Seven Station system - motorized magazine with pick and place system to supply pouches - Opening of the pouches with vacuum gripper - Filling unit with flow meter and temperature sensor, automated rejection, if temperature is too low - Sealing of pouches - Sealing of pouches - Cooling of the seal - Pouch discharge - Check weigher - Cooler and dryer for pouches - Cooling in water bath - With UV lamps for desinfication Kjdpfjvptt Rjx Ahbjdu - Drying by blower, five nozzles - Conveyors and collection table

Condition: good (used), Filter plates for chamber filter press, chamber filter plates for chamber fitters presses. Format 1000 x 1000 The Chamber filter plates made of Polypropylen, is characterized by excellent chemical resistance and easy handling, due to its low weight, Kdodpfx Ahod Ezfmobsu The plates are cleaned befor delivered. (Example photo) We always have good second-hand and new chamber filter plates from stock Gladbeck for your chamber filter press in all sizes. You are welcome to ask us for your requirements.

Condition: excellent (used), Year of construction: 2011, machine/vehicle number: 3130055185, with Freeflow Printserver and Clear Toner Counter (m): 7.3 Colors: 4 + varnishes Format : A7 – A3+ (SRA3) Equipment / Additional information: Image Resolution: 2400 x 2400 dpi VCSEL ROS Productivity/Print Speeds—AWM • 80/100 ppm (8.5" x 11"/A4 letter), all weights 55–350 gsm (15 lb Bond to 130 lb Cover) • 4800/6000 full process color A4 (letter) 4/0 impressions per hour • 44/50 ppm (11" x 17"/A3–12" x 18"/SRA3), all weights 55–350 gsm (15 lb Bond to 130 lb Cover) • 2400/3000 (11" x 17"/A3–12" x 18"/SRA3 tabloid) 4/0 impressions per hour and 4800/6800 (8.5" x 11"/A4) IMP Paper Format/Sizes • Maximum Sheet Size: 13" x 19.2" (330 x 488 mm) • Minimum Sheet Size: 7.2" x 7.2" (182 x 182 mm), tray inserter kit supports for 4" x 6" (102 mm x 152 mm); see Optional High Capacity Feeder • Maximum Print Area: 12.83" x 19.05" (326 mm x 484 mm) • Maximum Print Image Assurance: 12.48" x 19.05" (317 mm x 484 mm) Machine can staple, punch, fold & front cut Complete machine with software & RIP Brochures, flyers, business cards Envelopes can also be printed Various spare materials: Ksdpfx Aoh Nvm Dohbsdu Contains 1 bottle Blaue, 1x yellow, 1x blue, 1x red 1x Kit Beet Assy – FSR Module IEC 1x Chamonix Waste Tonner Bottle 2x Tonner Waste Container 10x Cartridge M 006R01472 3x Cartridge C 006R01471 4x Cartridge K 006R01470 2x Cartridge Y 006R01473 7x Staple Cartridges 008R12925 1x Belt Assy-IBT 064K93191 8x Fuser Belt Assembly 1x Chamonix Deutemle 1x MM Assy-1 5x Copy Cartridge 4x Chamonix Corotion Assy

Condition: used, Ferwood Code: RU0010598 - Manufacturer Code: G042300060 - Condition: Used - Compatible Machine: SCM EDGE BANDING MACHINE - If interested we offer a revision service, contact us. Kodpjvazhdjfx Ahbjdu

Condition: excellent (used), machine/vehicle number: 3.278-870805-1, Part No.: 42.35.53 Kodoh Eii Tjpfx Ahbedu Technical data and description: see pictures

Condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: 0G000072, The Frascold Q5-21.1Y compressor is a reliable, high-performance solution for a variety of industrial and commercial applications. With an impressive flow rate of 21.18 m3/h, this compressor guarantees efficient cooling and refrigeration processes. Whether you work in HVAC, cold storage or food processing, the Frascold Q5-21.1Y delivers exceptional performance. ➢Product highlights: ✓Powerful performance: The Q5-21.1Y boasts a maximum power consumption of 6.6 kW, making it a suitable choice for demanding applications. ✓Optimal Oil Management: With a 1.6-liter oil charge, this compressor ensures smooth operation and long service life. ✓Rugged construction: the Q5-21.1Y is built to last, with dimensions of 449 mm x 286 mm x 325 mm and a weight of 79 kg. Its solid design stands up to the rigors of industrial environments. ✓Versatile connections: The suction connection is 1 1/8", and the flow is 3/4", allowing easy integration into existing systems. ➢Specifications: Kdedpfxor Id Tqe Ahbju Compressor Frascold Q5-21.1Y, discharge: 21.18 m3/h, maximum power consumption: 6.6 kW, oil charge: 1.6 l, connection: suction 1 1/8 inch, discharge 3/4 inch, dimensions (length x width x height) 449 x 286 x 325 mm, weight: 79 kg` Price without VAT.

Condition: new, Year of construction: 2026, Horizontal bending machine T 1000 Multi - ZOPF - with semi-automatic control - hydraulic pressure 100 to. - length of stroke 300 mm - bending speed adjustable - max. working speed 10 mm/sec. - return speed 20 mm/sec. - hydraulic pressure adjustable - maximum bending high 300 mm - motorcapacity 10 KW - 400 V 50 hz 3 ph. - working height 900 mm - closed table - replaceable wear plate - weight 2300 kg Kdjdpfjg Anurjx Ahbju - colour RAL5012 / RAL7015 - bending capacity: flat material max. 300x32 mm (V200) round tube 3/8" - 3"

Condition: not inspected (used), VERINOX JUNIOR universal oven for small and medium productions. The technological excellence of our most sophisticated industrial systems – applied to ovens for small and automatic medium productions – ensures maximum performance and top quality products. Oven with forced draft ventilation for dry cooking, steam cooking, drying and smoking Maximum heat treatment uniformity and efficiency (+/- 1°C) Fast heating up to 180°C Cooking time optimisation Suitable for all types of cooking and for top quality products Simple to use Low energy consumption Recipes and processes programmed from an electronic control panel for automatic oven operation Works 24 hours per day with the utmost reliability The JUNIOR oven is suitable for the following heat treatments: - Dry cooking - Drying - Frying - Smoking Kdodpfxjg H Tldo Ahbeu - Steaming Preparation uses: cheese, salami, pasta, confection of vegetables and fruits, drying of meat products, smoking of meat products, animal food, fish, etc. Junior universal ovens are thermally insulated with an expanded material that has high insulating properties, coated with sheets of satin-finish and ribbed AISI 304 stainless steel. The excellent speed and uniformity of the heating up to a maximum of 180°C, an important feature of the JUNIOR, is ensured by stainless steel fans and special shielded heating elements. The JUNIOR oven comes with its own steam production system. Integrated control system. The microprocessor-based control panel is an extremely hi-tech, simple and reliable means of control. Its main features are working temperature and time indicators, an indication of the number of stages in progress, airlock position indicator, commands for setting ventilation, commands for setting stage transition, commands for setting pause and delayed start, memorisation of values and functions in progress. Total external dimensions: W 107 cm x H 100 cm x H 215 cm Interior dimensions: W 97 cm x W 75 cm x H 120 cm Interior dimensions of the lower collector drawer: W 73 cm x W 72 cm x H 25 cm Trolley: 90 cm x 72 cm x120 cm The cell has 2 product probes. Power supply: 380 V, 12 kW For the Romanian companies, there is the possibility of selling in instalments. Price Euro 2.900 Euro + VAT, FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: excellent (used), Year of construction: 2003, Feeder Caps 8006 automatic disc feeder, sorting machine Kdsdpfxjg Rkwmj Ahbsu Fully automated, variable dosing speed, manual height adjustment. Stainless. Year of production: 2003 Power: 0.55kW max. dosing capacity: approx. 1000 pcs / min Diameter: 1400mm Siemens control. Purchase of industrial equipment and machinery. Wide Range of Used Machinery, Industrial Equipment

Condition: new, table length 2000 mm table width 1000 mm table height 850 - 900 mm weight of the machine ca. 0,45 t Welding table / perforated table: Hole diameter: 28mm The table is made of 15mm thick, high-alloy steel S355 JR T = 15 The surface is untreated. Sidewalls 165mm height adjustable from approx. 880 - 980mm Ribbed underside for reinforcement. including floor storage Accessories optional !! Ksdpfxogp Dymo Ahbodu Surface flatness 0.2 - 0.4mm on 1000mm. Very sturdy base, so the Table can be moved with a pallet truck. The accessories shown are optional! Pallet truck is not included in the scope of delivery

Condition: like new (used), Year of construction: 2020, operating hours: 50 h, machine/vehicle number: LW250*1000, Decanter centrifuge manufactured in 2020, but put into operation in May 2021! The machine is in like new condition (used in total approx. 50 operating hours)! The decanter is for sale due to a change in technology, it works flawlessly! Kedpfx Ahopu A D Ajbjdu Manufacturer: YIXING HEAD SEPARATOR MACHINERY CO. LTD., CHINA Year of manufacturing date: 2020 Serial Number: LW250*1000 Machine signal: 02-001 Decanter indication number: 2647 Sludge formation capacity of decanter: 500 kg/h Main motor capacity: 7,5 KW Vice motor capacity: 3 KW Capacity: 1-5 m3/h Netto weight of decanter: 1000 kg Material of wetted parts:1.4404 Feed volume flow: 0,5t – 3t/h Stainless steel Reference number: 2590

Condition: new, The POSEIDON-1000 cleaning machine is designed to diagnose, wash, and dry DPF filters and catalytic converters of various designs, meeting EURO 5 and EURO 6 standards. The machine offers gentle and effective cleaning through a washing method that achieves excellent results without damaging the expensive filters. The stand operates based on hydro-impact and turbulent fluid movement, using special washing solutions and temperature regimes for effective cleaning. After cleaning, the filter's operating properties are restored by 97%. KEY FEATURES - Testing of the filter before washing to assess the degree of clogging and after washing to check the quality of the cleaning. - Automated washing cycle with the possibility of programming all operating modes. Filter cleaning is hydrodynamic, with hydraulic and pneumatic systems operating in specific modes to generate hydraulic impulses for the removal of contaminants. - Accelerated drying of the filter by means of a powerful hot air blower, which allows the complete removal of residual moisture from the product. >> This allows the entire cleaning cycle to be completed in a short time, >> and return to the customer a clean and dry filter ready to be fitted to the vehicle. Kdodpopbv Hgofx Ahbou Perspective business with POSEIDON-1000 • The equipment and technology allow to perform high quality cleaning of DPF particulate filters of all types and brands of cars. • The most functional stand among foreign analogues, thanks to which it has high productivity. • Automated operation and control of the process of cleaning and drying the filter allows the stand to be operated by one person. • Minimal resources and time required to open your own service for cleaning particulate filters with our equipment. • Maximum quick payback of the equipment if you own a service for the repair of automotive units. YOUR BENEFITS + Automated process of DPF filter cleaning with the possibility of programming all the machine's operating modes, gives you the opportunity to independently adjust the washing mode to increase the efficiency of the processes or to work with the modes set by the manufacturer. + Full control of the filter cleaning and drying process is guaranteed by the presence in the standard programme of graphs displaying air or water pressure values in real time. + The filter condition diagnostic function with report printing allows the creation of reports before cleaning (to check the degree of contamination) and after cleaning (to check the quality of the operation performed). + The working surfaces and the body of the stand are not subject to corrosion as they are made of stainless steel sheet material. + The hermetic chamber not only limits the spillage of technical fluids, but also reduces the noise level to acceptable levels, making work on the stand more comfortable and safer. + Quick installation of the DPF filter is possible thanks to a separate pneumatic system for the connection of a universal quick-fit adapter. + The universal tool allows the installation of any DPF filter, regardless of the vehicle type. + Closed-loop fluid filtration is achieved with coarse and fine filters. The filters are equipped with pressure gauges that allow the degree of contamination to be determined. + Rationally selected water tank volume allows to provide short fluid warm-up time, long time between fluid changes. Please contact us to get the best offer!

Condition: good (used), PTO shaft, drive shaft -Capacity: 1 3/8" 6 teeth (Ø 35 mm) -Length: 80-100 cm -They are suitable for fertilizer spreaders, field sprayers, band or circular saws, forestry winches, log splitters, hay turners, rotary rakes, loader wagons and many other implements. -Number: 10x PTO shafts available Kdodob A Niyspfx Ahbeu -Price: per piece -Weight: 16 kg/piece

Condition: good (used), Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Design: Single-acting -Piston diameter: approx. 165 mm -Piston rod: Ø 140 mm -Stroke: 1000 mm -Total length retracted, center to center of hole: 1670 mm -Piston rod mounting: Ø 80 mm -Cylinder mounting: Ø 80 mm Quantity: 1 piece available -Dimensions: 1850/270/H220 mm Kdedpfx Aecv Sivshbeu -Weight: 318 kg

Condition: used, functionality: fully functional, Parallel Lathe CAZENEUVE HB 500 Between points: 1000 mm Maxi Ø on bench: Ø 500 mm Maxi Ø over saddle: Ø 190 mm Spindle diameter: Ø 42 mm Spindle speed: from 20 to 1600 RPM Turret: MULTIFIX type B 3-jaws chuck Ø 215 mm Threadings: Metric + Whitworth Tailstock: CM5 Scale: 2 axes NEWALL Recent electrical panel Supplied with 1 tool holder + 1 set of jaws Lubricant pump Kedpfx Asz D Hrvohbodu Voltage: 380 V Dimensions (L x W x H): 2500 x 1400 x 1600 mm Weight: approx 2 T

Condition: excellent (used), functionality: fully functional, from an EDM (electrical discharge machining) machine Kdodsz Euqispfx Ahbsu Travel in X: 220 mm Travel in Y: 160 mm Mitutoyo 2-axis digital readout with a display accuracy of 1/1000 mm . Base without evaluation .

Condition: used, Pair of cast iron angle plates Height: 3000 mm Kodpoz H I Abofx Ahbsdu Width: 1000 mm Depth: 1245 mm Weight: 3 T / unit

Condition: like new (used), Year of construction: 2019, operating hours: 706 h, functionality: fully functional, Exellent condition, can be seen working Kdjdpoz Hdi Dofx Ahbsu

Condition: used, KELLENBERGER KEL‑VISTA UR 175/1000 is a CNC cylindrical grinder, engineered for precision, high accuracy and reliability. Capacities: centre height 175 mm, distance between centres 1000 mm, max workpiece 100 kg; grinding wheel Ø400×63 mm, bore 127 mm; tailstock travel 50 mm, max table tilt 9°. Specs: wheel peripheral speed 35 m/s, spindle speeds 8–800 t/min (stepless), grinding spindle motor 5 kW, rapid feed 12 m/min, spindle taper ASA5/MK5, overall L3200×W1700×H2000 mm. Accessories: coolant system, paper filtration, set of grinding wheels. Delivers tight tolerances; ideal for automotive, aerospace, machine tools and medical sectors. Kjdpfx Aez Dvzajhbodu

Condition: refurbished (used), Year of construction: 2012, functionality: fully functional, input voltage: 400 V, total length: 6,100 mm, total width: 1,200 mm, year of last overhaul: 2025, warranty duration: 12 months, input frequency: 50 Hz, UV curing oven with 2 lamps Adjustable belt speed Adjustable lamp power Total belt length: 12.50 meters Kdsdoz Dgtgopfx Ahbou Usable belt length: 6.05 meters Belt width: 1 meter

Condition: used, all stainless steel electrically heated heating separately adjustable in two areas adjustable speed belt width ± 1.000 mm 270 kW, 411 amp canopy with electric hoists with a fine-mesh band Suitable for steam injection (to heat up and to improve product yields) suitable for CIP cleaning system outside dimensions (l x w x h): ± 9.000 x 2.600 x 3.700 mm in good condition Fully mechanically overhauled: New bearings, chains, seals, slide bushings, gears, … All (motor-)driven transmissions overhauled or replaced with new ones Hood and tank completely re-insulated New grill belt, standard dimensions for snack products All wear-sensitive components replaced or fully overhauled General cleaning, overhaul, and inspection of the construction Fully electrically overhauled + update of electrical cabinet and control system: All electrical components and cables replaced with new ones Conventional push-button operation with Jumo temperature PID controller New electrical diagrams (E-Plan) New sensors Coding/labeling of components and cables Kodsz Ep A Hepfx Ahbedu New electrical heating elements: New folded heating resistances Completely new wiring Electrically tested, heated through, and measured

Condition: good (used), Year of construction: 2010, Ref. -No.: 10530 Manufacturer: DöRRIES - SCHARMANN Type: Alpha 1000 Year of construction: 2010 Type of control: CNC Control: Siemens SINUMERIK 840 D Storage location: Halberstadt Country of origin: Deutschland X-Travel: 2000 mm Y-Travel: 2000 mm Z-Travel: 2000 mm A-Axis: 0 - 90 x 0,001 ° B-Axis: 360 x 0,001 ° Number of T-slots: 1 + 8 Max. Workpiece Weight: 5000 kg T - groove width: 22 mm T - slot spacing: 100 mm T-Slots: DIN 650 mm Kdedpfx Ahjy Ed Ehsbeu Tool Taper: HSK - A 100 Tool Piece Magazine With: 207 + 10 Pcs./pcs. Max. Torque: 1250 Nm Feed Speeds X/Y/Z Axis: 1 - 30000 mm / min Rapid Travel X/Y/Z: 30,00 mm / min Drive Capacity - Spindle Motor: 45 kW Total Power Requirement: 100 kW Dimensions Of The Machine Ca.: 13 x 8 x 4,5 m Size Of Pallet: 2 x 1000 x 1000 mm Spindle speed gear stage 1: 1 - 1096 1 / min Spindle speed gear stage 2: 1096 - 6000 1 / min Further information: - Measuring probe - Chip conveyor - Coolant system - Coolant through the spindle - Pallets with 5-way media connection and clamping hydraulics - Extraction system - Swivel spindle A-axis 0 - 90 - NC rotary table B-axis

Condition: used, Year of construction: 2005, operating hours: 40,000 h, clamping force: 25 kN, displacement volume: 230 cm³, injection pressure: 2,500 bar, overall weight: 2,500 kg, screw conveyor diameter: 18 mm, terms of delivery: FCA Pegnitz delivery time: on request terms of payment: 100% prior to delivery Kdsdpfx Aheynbcnjbsu

Condition: used, Year of construction: 2001, operating hours: 70,000 h, clamping force: 50 kN, displacement volume: 739 cm³, injection pressure: 2,470 bar, overall weight: 2,500 kg, screw conveyor diameter: 28 mm, terms of delivery: FCA Pegnitz delivery time: on request Kdedpfx Ahjzt Alysbju terms of payment: 100% prior to delivery

Condition: refurbished (used), Year of construction: 2003, operating hours: 7,951 h, functionality: fully functional, total width: 2,450 mm, total length: 7,600 mm, pressure: 1,000 bar, operating pressure: 1,000 bar, fuel: diesel, overall weight: 9,000 kg, rotational speed (max.): 2,100 rpm, empty load weight: 9,000 kg, year of last overhaul: 2025, water pressure: 1,000 bar, pump capacity: 205 l/min, Equipment: rotational speed infinitely variable, type plate available, High-pressure pump unit, Hammelmann HDP 402, housed in a WAB container. Similar to, but not a Kamat, Uraca, or Woma. Pump type: Hammelmann HDP 402 PRESSURE STAGE 1: Operating pressure: 880 bar Flow rate: 242 l/min PRESSURE STAGE 2: Operating pressure: 1000 bar Flow rate: 205 l/min Drive speed: 2100 rpm Kdjdsipadxspfx Ahbju Plunger: d50 mm Drive power: 400 kW with a 442 kW Caterpillar C-15 2CPXL14.6ESK diesel engine with workshop and changing room. Dimensions L x W x H: approx. 7600 x 2450 mm Weight: approx. 9000 kg Year of manufacture: 2003 Operating hours: 7951 Condition: The high-pressure pump has been fitted with new valves. New batteries. In good used condition.