Used Irus Deltrak 2.5 for sale (2,060)

Condition: excellent (used), functionality: fully functional, gearing type: hydrostat, fuel type: diesel, color: orange, overall weight: 7,200 kg, empty load weight: 7,200 kg, operation weight: 7,400 kg, tire condition: 80 %, axle configuration: 6x2, number of seats: 2, first registration: 12/2014, shovel volume: 3.8 m³, suspension: air, Year of construction: 2014, operating hours: 6,100 h, Equipment: adjustable chassis, hydraulics, WE HAVE THREE CATERPILLAR ASPHALT PAVERS IN STOCK: TWO ORANGE AND ONE YELLOW. The following offer applies to a 2014 Caterpillar AP300D with 6,100 operating hours, equipped with an AS3173 working table. For sale is a professional asphalt paver designed for the construction and renovation of surfaces in small and medium-sized road projects. Its compact dimensions, hydrostatic drive, and hydraulically adjustable working width make it suitable for use in urban areas, on local roads, in parking lots, and on bicycle paths. MACHINE SPECIFICATIONS • Manufacturer: Caterpillar • Model: AP300D • Year of manufacture: 2014 • Operating hours: 6,100 hours • VIN/PIN: CATAP300JTEN00136 • Chassis: wheeled • Working table: Caterpillar AS3173 • Table serial number: DLC00589 • Weight as indicated on the manufacturer’s plate: 7,400 kg • Maximum permissible total weight: 7,750 kg • Country of manufacture: Italy CATERPILLAR C4.4 ENGINE The four-cylinder Caterpillar C4.4 ACERT diesel engine with a displacement of 4.4 liters provides power to the machine's drive and working units. • Gross power: 55.5 kW / approximately 75 hp • Net power according to model documentation: 50.9 kW / approximately 69 hp • Rated engine speed: 2,200 rpm • Fuel tank capacity: 110 liters • Hydrostatic drive system • Catalog travel speed: up to 16 km/h • Catalog paving speed: up to 30 m/min Smooth speed control allows the work rate to be adjusted to the supply of the mixture and the conditions on the construction site. Paving, travel, and maneuvering modes facilitate operation during surfacing and machine movement. AS3173 WORKING TABLE — WORKING WIDTH 1.70–3.20 M The mounted Caterpillar AS3173 table allows for hydraulically adjustable paving width in the basic range of 1.70 to 3.20 m. Model expansion options: Dksdpfx Alez I Srcs Asu • Width up to 4.00 m after mounting additional extensions • Width from 0.65 m with an appropriate reduction attachment • Catalog cross-profile adjustment of the table: from -2.5% to +4.5% The AS3173 design includes electric heating of the working plates and a vibration system. The table forms the surface and provides preliminary compaction of the mixture before final compaction with a roller. MIX FEEDING SYSTEM The AP300D model has a front hopper with a catalog capacity of approximately 3.8 m³. The mixture delivered by the truck is transported by conveyors to the rear of the machine and then distributed by screws in front of the working table. Independent control of the conveyors and screws allows the material feed to be adjusted to the working width and rate. The ability to change the direction of their operation facilitates control of the mixture when finishing the working strip. The stated price is net and applies to export and for companies. A significant discount is possible for individual customers. We invite you to contact us directly by phone to get your best price.

Condition: excellent (used), Year of construction: 2010, Ultrafiltration plant for fermented products 3 Main items: 1) Thermization unit 2) Ultrafiltration (UF) for fermented milk 3) Cooler and Silo. The line is used to produce Quark/Skyr. The thermization and ultrafiltration unit are also suitable for producing other fermented and concentrated dairy products such as: Skyr, Mascarpone, and Double Cream cheese. Key data: - Input: 3,500 - 5,000 liters per hour of fermented skim milk, full-fat milk, or enriched products. - Concentration factor: 1.8-2.5 1) Thermization unit Complete skid-mounted thermization unit. Flow rate: 3,500 up to 5,000 liters (depending on the product). Manufacturer: Tetra Pak Temperature cycle: Input: 21-30 °C (incubation temperature) -> recuperation (permeate cooler) -> thermization at 55/60°C or pasteurization at 72/95 °C -> holding -> output to ultrafiltration at approx. 45 °C. Complete unit including: * Stainless steel frame in which everything is pre-assembled. * Closed balance tank with spray bowl. * Centrifugal product pump, stainless steel casing, flush seal, type: LKH. * Plate heat exchanger, 4 stages, new, Tetra Pak, Clip6-SR Model. * Control box with all connections for sensors and pneumatic valves. * Holding tube for 5,000 liters per hour, adjustable by connecting more or fewer tubes: 30 seconds up to 180 seconds in 9 stages. 2) Ultrafiltration unit Manufacturer: Tetra Pak Type: Tetra Alcross US P&F Serial number: T5845810096 Year: 2010 Capacity: Input up to 5,300 liters/hour Description: Concentrates yogurt or fermented milk to achieve the desired composition and texture. The UF separates the product into retentate and permeate. The retentate is the product, with proteins and fat (if included) concentrated. The advantage of this design of UF (compared to spiral-wound UF and separators) is that it is suitable for fermented products with and without fat. Also, all proteins are concentrated (even whey proteins). This results in high pressures in the system; filtration can only be achieved with a plate and frame filtration system with flat FR60pp filters and rotary piston circulation pumps. Some example products that can be made with this system: Input: skim milk 9% TS -> output approx. 16% TS (Skyr). Input: 20% TS including fat -> output: cream cheese or mascarpone. Dkodez Imdaepfx Al Aeu Input: pre-concentrated fermented skim milk up to 12% TS -> output up to 18% TS (Quark). The limiting factor is the permeate output. Approximate permeate per stage: Stage 1: 1100-1755 liters/hour, 13.5 m2 filters. Stage 2: 675/1170 liters/hour, 9 m2 filters. Stage 3: 320/585 liters/hour, 4.5 m2 filters. Stage 4: 300/585 liters/hour, 4.5 m2 filters, 15 bar. Filter: plate and frame type, manufacturer: Tetra Pak - DDS, model: M37 Complete unit including: * Stainless steel frame. * 2 balance tanks with spray bowl (feed and permeate return). * Feed pump Tetra LKH. * 4 circulation loops including circulation pumps. First stage with centrifugal pump, 3 stages with Waukesha 320-U2 rotary piston high-pressure pumps. Last stage up to 15 bar pressure for highly viscous products. 3) Quark silo, cooler, and pump. Manufacturer: Schwarte-Milfor Type: Quarksilo Serial number: 3580 Year: 2011 Capacity: 5,000 liters Description: Robust conical design for very viscous products. Insulated. Hermetic, ultra-clean with sterile air. Sensors for level and temperature. On inlet: - Plate cooler Manufacturer: Tetra Model: Clip line C6 Thermal cycle: 45 -> approx. 18°C

Condition: good (used), Morse taper sleeve, tool holder, Morse taper, Morse cone, taper sleeve, adapter, extension sleeve, reducing sleeve, cone sleeve, adapter sleeve, spindle sleeve -Adapter sleeve: Morse taper sleeve MK6 -Type: Reducing sleeve MK6/5 -Dimensions: Ø 64/220 mm -Number: 6x Morse taper sleeves available Dkjdsz Imiispfx Al Aeu Price: per piece -Weight: 2.5 kg/pc.

Condition: new, Year of construction: 2026, • Two main electric motors, each with a power of 11 kW • Maximum material thickness: 250 mm • Maximum material width: 300 mm • Minimum cutting height: 10 mm • Adjustable feed rate: 5-25 m/min Dksdozqzgwopfx Al Aju • Lower saw blade stroke: 10-150 • Upper saw blade stroke: 20-190 • Minimum distance between the saw blades: 15 mm • Saw blade lubrication: pneumatic sprayers • Hydraulic saw blade tensioning • Manual setting marker • Wheel diameter: 710 mm • Outfeed table length: 2.5 m • Double pressure rollers

Condition: new, 10x20m storage platform, load: 500kg/sqm lower edge: 2.5m, approx. 200sqm system platform Data: Dodpfxez Iq Ics Al Aoku - Length : approx. 10m - Width : approx. 20m - Lower edge of platform : approx. 2.5 m - Top edge of stage : approx. 2.88 m - Total area : approx. 200 sqm - Load : 500 kg / sqm - Covering : 38 mm chipboard P6, top natural, bottom white. - Support grid : 5.0m x 4.0m - NO CROSSES, bracing with dome brace. - New ex works plus freight depending on zip code. Scope of delivery : - 20 x C profile 4000 mm , sendzimir galvanized . - 52 x S profile 4800 mm , sendzimir galvanized . - 18 x support 2500 mm , RAL 7016 . - 03 x strut brace 2517 mm , RAL7016 . - 93 x chipboard 2400 x 1000 x 38 mm natural/white P6 . - 18 x Lining plates for supports . - 18 x Set of dowels for supports . Price : 20.609 € net plus statutory VAT. You will receive an invoice with VAT shown. Optional on request : - collision protection - railing - Transfer station - Stairs - ground anchor - Steel construction can be coated in any RAL color. (standard RAL7016) Transportation : On request, delivery is carried out by our partner forwarding company, the costs for this depend on the zip code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: new, 5x10m storage platform, load: 500kg/sqm lower edge: 2.5m, approx. 50sqm system platform Data: - Length : approx. 5m - Width : approx. 10m - Lower edge of platform : approx. 2.5 m - Top edge of stage : approx. 2.88 m - Total area : approx. 50 sqm - Load : 500 kg / sqm - Covering : 38 mm chipboard P6, top natural, bottom white. - Support grid : 5.0m x 5.0m - NO CROSSES, bracing with dome brace. - New ex works plus freight depending on zip code. Scope of delivery : - 04 x C profile 5000 mm , sendzimir galvanized . - 14 x S profile 4800 mm , sendzimir galvanized . - 06 x support 2500 mm , RAL 7016 . - 03 x strut brace 2517 mm , RAL7016 . - 24 x chipboard 2400 x 1000 x 38 mm natural/white P6 . - 06 x Lining plates for supports . - 06 x Set of dowels for supports . Price : 7.575 € net plus legally valid VAT. You will receive an invoice with VAT shown. Optional on request : - collision protection - railing - Transfer station Dkodpfxjz Iq N Hs Al Aou - Stairs - ground anchor - Steel construction can be coated in any RAL color. (standard RAL7016) Transportation : On request, delivery is carried out by our partner forwarding company, the costs for this depend on the zip code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: new, Year of construction: 2026, Electric Motor 22 kW Cutting Dimensions Max. log diameter 105 cm Max. log length 6.1 m 7.9 m (with BX6 bed extension) 9.7 m (with BX12 bed extension) Min. log length 1.8 m Clearance between rollers 84 cm Max. cutting width (cant) 78 cm Max. cutting height above the blade 34 cm Max. width of clamped material 66 cm Min. width of clamped material 5 cm Max. log weight 2.5 t Head Equipment Automatic thickness setting device (Setworks) Industrial PLC controller Head feed up/down Electric (Servo) Dksdpfx Aozqz Sgol Aeu Head feed forward/backward Electric Blade guide arm Electric (joystick controlled) Blade cleaning system LubeMizer Blade tensioning system Hydraulic with air cushion Debarker Optional Chip outlet diameter 150 mm (6") Head Features Board discharge system Laser Blade Length 5000 mm Width 38 mm 50 mm (Optional) Blade guide wheels Diameter 600 mm Type With flange-pressed and brush belt Material Cast iron Bed Equipment Bed construction Single-sided head guide system Cribbing beds Standard Bed extension BX6 bed extension: 1.8 m BX12 bed extension: 3.6 m Bed Features Board conveyor belt Shock-absorbing roller Log maneuvering kit Industrial hydraulics Center clamp with two bars 2 double-sided clamping devices (optional) 2 two-way chain log turners 2 driven leveling rollers 3 stoppers on two bars 7.5 kW hydraulic unit

Condition: good (used), Year of construction: 2016, Ref. -No.: 10411 Manufacturer: BROTHER Dksdpfx Aezc Dyrjl Aeu Type: Speedio S700X1 Year of construction: 2016 Type of control: CNC-Steuerung Control: BROTHER CNC Storage location: Halberstadt Country of origin: Germany X-Travel: 700 mm Y-Travel: 400 mm Z-Travel: 300 mm Main spindle drive power: 15,4 kW Main spindle speed range: 16 - 16.000 RPM Table surface: 800 x 400 mm Distance Spindle /Table: 180 - 480 mm Table Load: 300 kg Max. Tool Weight: 25 kg Max. Tool Length: 250 mm Max. Tool Diameter: 110 mm Tool change time: 0,8 s Tool Taper: BT 30 Tool Piece Magazine With: 21 Pcs./pcs. Feed Speeds X/Y/Z Axis: 10.000 - 20.000 mm / min Rapid Traverse X-Axis: 50 m / min Rapid Travel Y-Axis: 50 m / min Rapid Traverse Z-Axis: 56 m / min X - axis acceleration: 2,0 G Y - Axis acceleration: 1,3 G Z - axis acceleration: 2,2 G Acceleration time: 0,30 sec Machine length: 2360 mm Machine width: 2120 mm Machine Height: 2500 mm Weight Of The Machine Ca.: 2,4 t Further information: THREAD Speed: 6,000 rpm Acceleration time: 0.11 s CUTTING CAPACITY Drilling capacity in aluminum: max. 24 mm / F0.2 Drilling capacity in C45 steel: max. 18 mm / F0.1 Tapping capacity in aluminum: max. M22 Tapping capacity in C45 steel: max. M14 Milling capacity in aluminum: max. 660 cm³/min. Face milling cutter: Ø 100 / depth 2.2 mm / F=3000 Milling capacity in steel C45: max. 48 cm³/min. Face milling cutter: Ø 40 / depth 2.5 mm / F=484 HIGH-SPEED TOOL CHANGER Stations with directional logic: 21 Change time T - T: 0.8 seconds Changeover time C - C at n=10,000 rpm and XYZ positioning: 1.4 seconds Positioning accuracy: ± 0.006 mm Repeat accuracy: ± 0.004 mm Accuracy of thread depth: 0.05 mm Air consumption: 45 l/min Air pressure: 0.5-0.6 MPa Air quality: 99% anhydrous Including FANUC robot / automation Machine can be inspected under power.

Condition: used, functionality: fully functional, Year of construction: 2011, operating hours: 10,497 h, load capacity: 2,500 kg, lifting height: 4,700 mm, fuel type: diesel, mast type: triplex, construction height: 2,120 mm, power: 41 kW (55.74 HP), empty load weight: 4,030 kg, drive type: Diesel, Diesel forklift Mast type: Triplex Condition: Ready for use and fully functional Technical condition: good Front tire type: Solid rubber Front tire condition: 60 - 80% Rear tire type: Solid rubber Rear tire condition: 60 - 80% Description: Diesel forklift TOYOTA 02-8FDF25 - - 2.5 ton lifting capacity - - - Year of manufacture 2011 - - Side shifter + triplex free-lift mast - - Overall height 2.12m - - Lifting height 4.70m - - 10497 operating hours according to display - - Work lights front and rear - - - Solid rubber tires approx. 80% - - - 4th hydraulic circuit to the fork carriage - - - Inspection and test drive on site possible - - - Delivery possible! Side shifter, 3rd valve, 4th valve, overhead guard, Dkjdpfx Aszx Ircsl Aju

Condition: excellent (used), WSM SZ-250K Feeder Dsdsx Elfcspfx Al Ajku The WSM SZ-250K is a feeder from WSM-Automation, specifically designed for applications with high cleanliness requirements. The "k" in the model designation stands for "short" and refers to the reduced length of the sorting spiral, which minimizes the generation of abrasion caused by material level and vibrations. Function: It is a feeder that combines the advantages of screw conveyors with the need for clean processes. Special feature: The shortened sorting spiral (effective length) is the core innovation to minimize contamination through abrasion. Application area: It is used where a high level of cleanliness is required during the feeding process to ensure clean assembly. Feeding unit SZ-250K consisting of: Belt hopper BB-01-B (0.5 l) with level control and contamination barrier Screw conveyor WFL 200 IU (200 mm) with singulation device Aluminum frame with plexiglass housing Overall dimensions: H: 740 mm W: 700 mm D: 380 mm Screws: M 2.5 x 6 mm Voltage: 230 volts You can find more items - new and used - in our shop! International shipping costs on request!

Condition: excellent (used), WSM SZ-250K Feeder The WSM SZ-250K is a feeder from WSM-Automation, specifically designed for applications with high cleanliness requirements. The "k" in the model designation stands for "short" and refers to the reduced length of the sorting helix, which reduces the formation of abrasion due to filling levels and vibrations. Function: It is a feeder that combines the advantages of helix conveyors with the need for clean processes. Special feature: The shortened sorting helix (effective length) is the core innovation to minimize contamination from abrasion. Application area: It is used where a high degree of cleanliness is required during feeding to ensure clean screwing/fastening. Feeding unit SZ-250K consisting of: Belt hopper BB-01-B (0.5 l) with level control and dirt brake Helix conveyor WFL 200 IU (200 mm) with singulator Dodpfx Aljx Elkfo Aeku Plexiglas enclosure Overall dimensions: H: 740 mm W: 700 mm D: 380 mm Screws: M 2.5 x 6 mm Voltage: 230 Volts You can find more items – new and used – in our shop! International shipping costs on request!

Condition: used, functionality: fully functional, Year of construction: 1985, Flatbed trailer CTC SPA RP26S Registered in 1985 3 axles Tires in 40/50% condition Length: 9.68 m, width: 2.5 m, payload: 195 quintals Dkedpfxez Nivcs Al Aju Double hydraulic ramps Good condition Available immediately WE WILL CONSIDER TRADING IN VEHICLES OF ALL BRANDS, INCLUDING MAN, MERCEDES, DAF, RENAULT, VOLVO, SCANIA, EQUIPPED WITH CIFA, SERMAC, OR PUTZMEISTER EQUIPMENT; OR EARTHMOVING MACHINERY FROM CATERPILLAR, FIAT HITACHI, OR KOMATSU.

Condition: new, Hygienio B1.N1 Steam Disinfection System Dedpfxoykt Inj Al Aeku The B1.N1 is ideally suited for ambulances, medical practices, dental clinics, and smaller spaces. Its compact size and unique features make it the perfect choice. If you are looking for a reliable and efficient disinfection solution without complicated operation, the Hygienio B1.N1 is just the thing for you. The ultimate, simplified disinfection system – developed for easy operation and handling. The B1.N1 model dispenses with the electronic control unit and is therefore particularly easy and effortless to use. Thanks to the manual and direct system status check, you have full control over the selection of the correct application mode – whether disinfectant or steam. The fluid tanks are equipped with optical level indicators, so you can monitor the level at any time and prevent possible damage to the internal components. Mobility: 4 abrasion-resistant rubber wheels Consumption: 2 liters of disinfectant solution per hour Tank capacity: Water tank: 2 l / Disinfectant tank: 2 l Working pressure: 2.5 - 4 bar Dimensions: 93.5 x 48.5 x 35.5 cm Lance length: 240 cm Weight: 23 kg Length of power cable: 4 m Manufacturer's price: €3,500 You can find more items – new and used – in our shop! International shipping costs available upon request!

Condition: new, TRUMPF Femtosecond Laser System / Ultrafast Pulsed Laser TruMicro 5070 Femto / TruMicro 5000 NEW / UNUSED – comprehensive laser system with system accessories For sale is a new and unused TRUMPF TruMicro 5070 Femto laser system with a TruMicro 5000 control/power supply unit and extensive accessories. The system has not been used in production and comes from a project where the equipment was never put into operation. Technical data: Manufacturer: TRUMPF Laser GmbH Type: TruMicro 5070 Femto (FU06) Year of manufacture: 12/2018 Wavelength: 1030 nm Laser power: 300 W Pulse energy: 1.5 mJ Pulse duration: 0.3–15 ps Power connection: 380–460 V / 3 AC + PE Frequency: 50/60 Hz Power consumption: 2.5 kW / 2.9 kVA Current consumption: 4.2 A at 400 V Protection class: IP54 Weight TruMicro 5070: approx. 380 kg Equipment: TRUMPF TruMicro 5070 Femto laser source TRUMPF TruMicro 5000 control/power supply unit Operator panel with emergency stop Industrial operating monitor TRUMPF control and electronics modules Beckhoff automation components Cognex component Optics and lens components Laser and light guide components Extensive power, control, signal and connection cables Dkjdoz I N Tkopfx Al Aju Pre-assembled connection cables Original TRUMPF documentation / manuals Additional extensive accessories as shown in the pictures Application areas: Laser structuring Micromaterial processing Precision machining Industrial laser applications Research and development Scope of delivery: TRUMPF TruMicro 5070 Femto TruMicro 5000 control/power supply unit Control, electronics and optics components Cables, connection components and documentation Extensive accessories as shown in the pictures Condition: NEW / UNUSED NEVER USED IN PRODUCTION Storage and packaging marks may be present. Shipping or freight forwarding possible. Subject to change, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: good (used), Year of construction: 1977, functionality: fully functional, Weinig Type PFA 250/85 Year of manufacture: 1977 1 U-7.5 kW 2 R-7.5 kW 3 L-11 kW 4 R-5.5 kW Dkodpfoz I A N Esx Al Aju 5 O-11 kW 6 O-7.5 kW 7 U-7.5 kW 8 Uni 7.5 kW Table: 2.5 m Spindles 6 and 7 with jointer Feed: 5.5 kW

Condition: ready for operation (used), Year of construction: 2015, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, total height: 2,800 mm, total width: 3,500 mm, table load: 6,500 kg, overall weight: 16,400 kg, spindle speed (max.): 6,000 rpm, spindle motor power: 24,000 W, product length (max.): 5,200 mm, number of axes: 4, This 4-axis ANAYAK CORREA XPERTA 25 was manufactured in 2015. It features an impressive X-axis travel of 2,500 mm, Y-axis travel of 1,000 mm, and Z-axis travel of 1,000 mm. The machine includes a robust table size of 2,800 × 1,000 mm and a maximum table load of 6,500 kg. If you are looking to get high-quality machining capabilities, consider the ANAYAK CORREA XPERTA 25 vertical machining centre we have for sale. Contact us for further details. • Table size: 2,800 × 1,000 mm • Spindle torque: 286 / 382 / 840 Nm • Rapid traverse X/Y/Z: 25 m/min • Universal indexed head: 2.5° • Through-spindle coolant (CTS): 30 bar • Machine dimensions / footprint: 5,200 × 3,500 × 2,800 mm Additional equipment • Chip conveyor Technical Specification Taper Size ISO 50 Dedpfxjz I Rime Al Asku

Condition: new, Year of construction: 2022, machine/vehicle number: 27762, type of input current: three-phase, input voltage: 22,000 V, input frequency: 50 Hz, nominal power (apparent): 250 kVA, secondary voltage: 400 V, type of output current: three-phase, output voltage: 400 V, Equipment: type plate available, SEA Trasformatori TTO oil-immersed distribution transformer for outdoor installation. Condition: new and unused warehouse stock. Never commissioned. Year of manufacture: 2022. Serial number: 27762. Country of manufacture: Italy. Nameplate data: - Rated power: 250 kVA - Primary voltage: 22 / 20 kV - HV tapping range: +/- 4 x 2.5% - Secondary voltage: 400 V - Rated secondary current: 360.8 A Dsdpfx Alez Nx I Ie Aeku - Frequency: 50 Hz - Phases: 3 - Cooling: ONAN - Winding material: aluminium - Highest voltage for equipment: 24 kV - Insulation level: LI 125 kV / AC 50 kV - Temperature rise: oil 60 K / windings 65 K The attached photograph shows the original manufacturer nameplate.

Condition: excellent (used), Year of construction: 2021, EMCO E350, SIEMENS 828D, 10,000 RPM 3-axis CNC milling machine with integrated 20-position tool magazine. Control: SIEMENS 828D Spindle: Speed: 10,000 RPM Spindle power: 7 kW Torque: 41 Nm Tool holder: SK30 ISO7388-1 (DIN 69871) Pull stud: ISO7388-3 (DIN69872 Type A) Travel: X=350mm, Y=250mm, Z=300mm Spindle nose to table distance: 120-420mm Rapid traverse X, Y, Z: 24 m/min Table: Cast iron table with T-slots Number - Width - Pitch: 5 - 12 - 45 Clamping area: 520 x 300 mm Maximum table load: 100 kg Tool changer: Drum magazine with 20 tool positions Tool change time (tool to tool): 2.5 seconds Coolant: Standard pump 3.5 bar Work area lighting: Via 1 halogen spotlight Standard equipment: o Central lubrication o Thread cutting without collet o Spindle blow-out device for cleaning the tool holder during tool changes o Coolant tank 140 liters o Vibration-damping leveling feet o Mounting angles and heavy-duty anchors Year of manufacture: 2021 Machine No. Q4A211601 Includes: Control language: Italian NC handwheel, portable Fastening material ET420/345/332 E45/65 MT45/65 Leveling element FK03/NBR05/NBR9014 Heavy-duty anchor FH18x80/50 B M12 Dkodpfsz Nm A Tex Al Aju Fastening material High-pressure coolant system 50Hz Coolant gun Warning light, LED, 3-way, side-mounted E350 Operating manual / ITALIAN

Condition: used, functionality: fully functional, Year of construction: 2014, Vögele 1603-2 vibratory asphalt paver Year: 2014 8,000 operating hours Equipped with leveling sensors and an extendable screed, 2.5 m closed – 5 m extended Djdsz Nkduspfx Al Ajku Maximum operating weight: 17–18.8 tons Engine type: Perkins 1104D-E44TA Working speed: 18 m/min Electric heating Good overall condition WE CONSIDER TRADE-INS OF VEHICLES OF ALL BRANDS, INCLUDING MAN, MERCEDES, DAF, RENAULT, VOLVO, SCANIA, AND EQUIPMENT FROM CIFA, SERMAC, PUTZMEISTER; OR EARTHMOVING MACHINERY FROM CATERPILLAR, FIAT HITACHI, KOMATSU.

Condition: good (used), Column jib crane, overhead crane, workstation crane -Manufacturer: Hans-Hebetechnik, Column jib crane type SSA 125-3.8, lifting capacity 125 kg -Large base plate: 1000 x 1000 mm Dkjdpfsxwt Nwsx Al Asu -Projection: 2,530 mm -Total height: 3,935 mm -Hook height: 2690 mm -Swivel range: 270° -Chain hoist: Demag type DCM-PRO 2 250 H2.8 V -Main stroke: 8.0 m/min -Fine stroke: 2.0 m/min -Transport dimensions: 3935/1000/H1000 mm -Empty weight: 540 kg

Condition: used, STANGE Elektronik GmbH Industrial Control / Process Control SE-604 Automation solution with multitasking PLC CoDeSys For sale is a used industrial control system from STANGE Elektronik GmbH. The SE-604 is a powerful control and visualization solution for industrial process and heat treatment plants. Control, PLC, program management, and plant visualization are combined in a single system. Technical data: Manufacturer: STANGE Elektronik GmbH Type: SE-604 Display: 6.5 inch TFT-LCD Resolution: 640 x 480 pixels Operation: Foil keypad, 34 keys Dedpfx Ajz Nvkyol Aeku Processor: Pentium-based 32-bit processor Working memory: 256 MB DRAM Program memory: CompactFlash ≥ 256 MB Operating system: WindRiver VxWorks PLC: IEC 61131 CoDeSys multitasking soft PLC Power supply SE-604: 24 V DC (18–36 V) Power consumption: typ. 24 W Operating temperature: 0 to +50 °C Protection class: Front IP65 / Rear IP20 Dimensions SE-604 (W x H x D): 290 x 165 x 90 mm Weight SE-604: approx. 2.5 kg Functions: Up to 50 control zones Up to 250 programs / recipes Up to 500 alarms with alarm history Program generator for up to 50 setpoints and 64 control tracks PID control with self-optimization function Plant visualization Web server / remote control Configurable user and operating levels Interfaces: Ethernet 10/100 2 x USB 2.0 RS232 RS422 CAN Modbus Profibus DP optional Application areas: Industrial and process plants Heat treatment plants Universal chamber furnaces Nitriding furnaces Hearth car furnaces Autoclaves Climate chambers Scope of delivery: STANGE SE-604 control system in housing Connection and communication cables as shown in the pictures Condition: Used Optical condition as shown in the pictures Operating hour counter available The table shown in the photos and any other items not explicitly mentioned are not included in the sale. Shipping or freight shipping is possible. Subject to changes, errors and prior sale. We would be happy to answer any further questions by telephone.

Condition: used, Year of construction: 2013, functionality: fully functional, travel distance X-axis: 3,500 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,250 mm, spindle speed (max.): 4,000 rpm, table width: 1,000 mm, table length: 3,700 mm, spindle motor power: 28 W, SORALUCE TA-A 35 CNC milling and boring center, equipped with a HEIDENHAIN iTNC 530 HSCI numerical control system, an automatic milling head, and a 40-position tool changer. Technical specifications Manufacturer: SORALUCE Model: TA-A 35 Year: 2013 Numerical control: HEIDENHAIN iTNC 530 HSCI Longitudinal travel X: 3,500 mm Dedpfsz Nhzdex Al Aeku Vertical travel Z: 1,250 mm Transverse travel Y: 1,200 mm Table dimensions: 3,700 × 1,000 mm Spindle power: 28 kW Spindle speed: 20 to 4,000 rpm Spindle torque: 479 Nm Spindle taper: ISO 50 / DIN 69871 A Rapid traverse rates: 25,000 mm/min Machine weight: approximately 18,500 kg Equipment and options Automatic milling head with 2.5° × 2.5° indexing Automatic 40-tool changer, with horizontal and vertical tool change HEIDENHAIN control with HR 410 electronic handwheel M&H 20.41-MULTI workpiece measurement system HEIDENHAIN TT 140 tool measurement probe Longitudinal chip conveyor Transverse chip conveyor Protective enclosure with access doors 3D thermal compensation Automatic centralized lubrication Preparation for the integration of a CNC dividing head

Condition: excellent (used), Year of construction: 2008, operating hours: 282 h, Calibration and finishing machine, wide belt sanding machine with electronic segmented sanding pad and finish sanding Ideal sanding machine for interior construction companies, also suitable for intermediate sanding of coated surfaces. Bookbinding machine with combined unit and electronic articulated pressure bar, edge segments can be switched on and off Segment width of the pressure bar 35mm Contact roller can be pneumatically adjusted, low wear due to corrugated steel roller Grain compensation Drive motor 7.5kW with automatic motor brake, stepless belt speed controlled by frequency inverter from 2 - 18 m/s Belt feed steplessly adjustable via frequency inverter from 2.5 - 13m/min Pneumatic workpiece-controlled belt blowing device Cleaning brush at the outlet Dsdpfx Alszqvmro Aoku Constant working height 900mm by adjusting the upper part of the machine, thus also integrable into sanding lines Feed belt still has good grip and is in very good condition Maximum sanding width approx. 1340mm Workpiece height approx. 3 to 150mm Common sanding belt dimension 1360 x 1900mm 3 rubberized pressure rollers Infeed roller table and foldable outlet table Preparation for vacuum blower. The belt is perforated and plugs for optional blower are available. Alternatively, the belt can also be connected to the extraction system. Extraction connection 1 x 200mm, 1 x 140mm and 2 x 100mm Terminal control with 50 programmable sanding programs for automated machine control. Parameters: Belt speed, feed speed, workpiece height, pressure bar engagement points at the front and rear as well as edge segments, belt blowing nozzle, optional vacuum blower, pneumatic adjustment of the calibration roller CE marking Operating manual without the illustrated connection cable Original paint, only touched up in places Approx. 282 operating hours, i.e. approx. 20 minutes per week. Dimensions approx. 1800 (with table 2600) x 2050 x 2150mm (LxWxH). Weight approx. 2400kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration and are in our warehouse, see "other offers from this provider".

Condition: excellent (used), functionality: fully functional, Complete machine park for sale, consisting of: Holzher machine park in like-new condition (in operation since 6/2024), consisting of: Tectra 6120 Dynamic beam saw, automatic panel storage system Storemaster 5110 (approx. 12x18m), Nextec 7705 nesting machining center, Weinig Dimter Opticut S60 optimizing miter saw (year of manufacture 2009), including waste conveyor (new, in operation since 6/2024). Nestro dust extraction system (in operation since 06/2024), consisting of: filter tower 11 kW + 7.5 kW (15,000 m³/h), briquetting press, shredder, piping for all machines, various pipe diameters. Dsdpfxszh Hw Ae Al Asku Mobile dust extraction unit Holzkraft RLA160, 2x mobile dust extraction units ASA2553 or similar. 2x Renner compressors, each 7.5 kW (1x new, in operation since 06/2024). 1x Ayen multiple drilling machine, special construction with 2.5m stop rail. 1x Cesab B625 electric forklift, 2.5 tons (year of manufacture 2014), 2x electric high-lift pallet trucks Toyota/BT (year of manufacture), 3x electric high-lift pallet trucks Cesab including initial lift (year of manufacture 2025). Various work tables, templates, pallet racks, material carts, etc. BeA various nailers & staplers. Various electric power tools, vacuum cleaners from Festool, Bosch Professional, etc. Bench drill Stürmer. Festool table saw. Bosch large panel miter saw on stand. EUR 530,000,- net (Total price EXW (ex works) for self-dismantling/collection). If you are seriously interested, we can gladly provide pictures and details of the individual items.

Condition: ready for operation (used), Year of construction: 2024, travel distance X-axis: 406 mm, travel distance Y-axis: 356 mm, travel distance Z-axis: 381 mm, table width: 305 mm, table length: 914 mm, table load: 227 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 11,200 W, number of slots in tool magazine: 31, tool weight: 5,400 g, number of axes: 3, This 3-axis HAAS Super Mini Mill was manufactured in 2024. It features impressive travels of 406 mm in the X-axis, 356 mm in the Y-axis, and 381 mm in the Z-axis. The machine includes a robust table size of 914 x 305 mm and a maximum table load of 227 kg. If you are looking to get high-quality machining capabilities, consider the HAAS Super Mini Mill vertical machining centre we have for sale. Contact us for further details. • Condition: Showroom machine • Working hours: 0 • Spindle nose to table: max 19.0 in / 483 mm; min 4.0 in / 102 mm • Spindle max torque: 22.0 ft-lbf @ 5000 rpm / 29.8 Nm @ 5000 rpm • Spindle drive system: Direct Speed, Belt Drive • Spindle bearing lubrication: Air / Oil Injection • Spindle cooling: Air Cooled • Table length: 36.0 in / 914 mm • Table width: 12.0 in / 305 mm • Table T-slot width: 0.626 in to 0.630 in / 15.90 mm to 16.00 mm • Table T-slot center distance: 4.33 in / 110 mm • Number of standard T-slots: 3 • Max cutting feedrate: 833 ipm / 21.2 m/min • Rapids (X/Y/Z): 1200 ipm / 30.5 m/min • Max thrust (X/Y/Z): 2000 lbf / 8896 N • Tool changer type: Side-Mount Tool Changer (SMTC) • Tool changer capacity: 30+1 • Max tool diameter (full): 2.5 in / 64 mm • Max tool diameter, large (adjacent empty): 5.0 in / 127 mm • Max tool length (from gage line): 7.00 in / 178 mm • Tool-to-tool (avg): 2.80 s • Chip-to-chip (avg): 4.20 s Djdsz Nxwiopfx Al Aoku • Coolant capacity: 45 gal / 170 L • Air required: 4 scfm @ 100 psi / 113.0 L/min @ 5.5 to 6.9 bar • Inline air hose & coupler: 3/8 in • Input AC voltage (3 phase) - Low / High: 220 VAC (30 A) / 440 VAC (15 A) • Shipping dimensions: 90.0 in x 80.0 in x 99.0 in / 229 cm x 203 cm x 252 cm • Shipping weight: 4650 lb / 2109.2 kg Technical Specification Taper Size BT 40