Used Instantaneous Water Heater for sale (13,232)

Condition: new, Year of construction: 2024, Gold River SWZ-700 water separators Application description: The GOLD RIVER SWZ series separator has been designed for special tasks, it can cope with the most difficult materials that contain many properties that disturb the separation process in separators commonly available on the market. SWZ water separators separate heavy fractions (non-ferrous metals) from, among others, plastics in the process of recycling secondary raw materials. SWZ separator equipped with a four-section copper water system equipped with radial nozzles with variable linear geometry. The separator uses the latest divided type of separation mat. The development of a modern module for preliminary division and preparation of material guarantees the purity of recovered raw materials in a very short time (plastics, metals). Why a water system? Our device uses a system similar to that used in the gold recovery industry. We use water as a carrier and a force that affects the materials in a gentle way. In the water system, all particles with higher mass are gently washed out and separated, generating no losses during the entire separation process. The properties of water together with our proprietary solutions are unrivaled compared to, for example, air separators. SWZ type separators are used: Separation of heavy from light materials (metal granulates contaminated with plastic, foil, paper, cotton, fibers) Cleaning plastics after air separators (dry) Separation of metals in cable and non-ferrous metal recycling lines The SWZ-700 water separator, thanks to the use of the latest module, performs the separation process in a very short time, therefore it is characterized by a high hourly efficiency of separated material of approximately 1200 kg/h. Description of action: The material fed into the separator goes through the transport channel to the module for initial fraction division into its mass and humidity changes. Some of the material is separated at this stage. In the second part of the module, the humidity of the remaining batch changes. Then the material falls onto the separation table where the final fraction separation takes place. As a result of this process, we obtain valuable materials from both sides of the separator. Construction description: Gedpfx Aksua Tbwsyobu The massive structure and the inertial drive of the separator are made of materials appropriately selected to withstand the overloads resulting from vibrations. The supporting frame ensures excellent stiffness and failure-free operation for many years. Due to the type of vibration drive, the design does not require the installation of a soil separator. Separation table equipped with hydraulic adjustment of the angle of inclination. The separation table has a special module for initial division of fractions into their mass and preparation for final separation. The water system has several water pressure valves. The water circulation in the separator is closed. There is no need for constant access to an external water source because the device works using the water already in the tanks. Based on experience and continuous research in our laboratories. We are able to provide you with separators individually adapted to the specific nature of the material being separated. In various versions and sizes. SWZ-700 separators are manufactured to individual order.

Condition: excellent (used), Coolant pump, immersion pump, coolant pump, centrifugal pump, cooling lubricant pump Gedehtryxspfx Akyjbu -Manufacturer: Grundfos, coolant pump type SPK1-11/8 AAA -Drive: 0.25 kW 2850 rpm -Max. flow rate: 1.0 m³/h -Max. delivery head: 22 m Maximum temperature: 90 °C -Dimensions: 180/150/H590 mm -Weight: 11 kg

Condition: refurbished (used), Year of construction: 2003, operating hours: 7,951 h, functionality: fully functional, total width: 2,450 mm, total length: 7,600 mm, pressure: 1,000 bar, operating pressure: 1,000 bar, fuel: diesel, overall weight: 9,000 kg, rotational speed (max.): 2,100 rpm, empty load weight: 9,000 kg, year of last overhaul: 2025, water pressure: 1,000 bar, pump capacity: 205 l/min, Equipment: rotational speed infinitely variable, type plate available, High-pressure pump unit, Hammelmann HDP 402, housed in a WAB container. Similar to, but not a Kamat, Uraca, or Woma. Pump type: Hammelmann HDP 402 PRESSURE STAGE 1: Operating pressure: 880 bar Flow rate: 242 l/min PRESSURE STAGE 2: Operating pressure: 1000 bar Flow rate: 205 l/min Gbedpeipadxsfx Akyou Drive speed: 2100 rpm Plunger: d50 mm Drive power: 400 kW with a 442 kW Caterpillar C-15 2CPXL14.6ESK diesel engine with workshop and changing room. Dimensions L x W x H: approx. 7600 x 2450 mm Weight: approx. 9000 kg Year of manufacture: 2003 Operating hours: 7951 Condition: The high-pressure pump has been fitted with new valves. New batteries. In good used condition.

Condition: good (used), Cooling water pump, centrifugal pump, water pump, coolant pump, drilling water pump, submersible pump, switching pump Gbsdpfjif Satjx Akysu -Cooling water pump: with cooling water reservoir -Pump: Manufacturer Elpu Type N 120 -Power: 0.085 kW -Speed: 2800 rpm -Dimensions: 570/540/H370 mm -Weight: 24 kg

Condition: good (used), Oil-water separation system, condensate separator, oil and water separator, oil separator -Manufacturer: Alarm clock, oil-water separation system oil and water separator type WO 2 -Dimensions container: Ø 470 x 740 mm -Total dimensions: Ø 590 x 1160 mm Gbsdpfx Akeq Ei Dbsysu -Weight: 27kg

Condition: excellent (used), Year of construction: 2007, Buderus SB735 low temperature boiler Year: 2007 Output: 1200Kw Gsdpfx Akjnr Ek Ujysbu Burner: Weishaupt oil or gas burner on request

Condition: used, Cooling water pump, centrifugal pump, water pump, coolant pump, drilling water pump, submersible pump, switching pump -Cooling water pump: with cooling water tank -Pump: Unfortunately the type is no longer readable -Container content: approx. 25 liters Gbsdjqbycbspfx Akyou -Total dimensions: 420/360/H3500 mm -Weight: 13 kg

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, - High-pressure cleaner PTC Torpedo Compact 21/250, 21/350, and 15/500 – similar to, but not a Dynajet, Oertzen, Falch, etc. - Cold water/hot water at approx. 95°C and steam at 32 bar up to 140°C + high-pressure steam up to 150°C at 200 bar (only in versions with 250 and 350 bar) and a chemical-free weed control function with approx. 99°C. The following models are available: - Torpedo Compact 23/250 | 23 l/min. at 250 bar | Diesel engine: Kohler KDW1003 18.9 kW with electric starter - Torpedo Compact 23/350 | 23 l/min. at 350 bar | Diesel engine: Kohler KDW1003 18.9 kW with electric starter - Torpedo Compact 16/500 | 16 l/min. at 500 bar | Diesel engine: Kohler KDW1003 18.9 kW with electric starter - Torpedo Compact 16/250 PS (high-pressure steam) | 16 l/min. at 250 bar | Diesel engine: Kohler KDW1003 18.9 kW with electric starter - Torpedo Compact 16/350 PS (high-pressure steam) | 16 l/min. at 350 bar | Diesel engine: Kohler KDW1003 18.9 kW with electric starter Gbsdpedqkrwofx Akysu - Dimensions and empty weight without water tank: 1205x1250x1330mm, approx. 280kg - Dimensions and empty weight with 300 l water tank: 1250x1900x1330mm, approx. 350kg - Dimensions and empty weight with 500 l water tank: 1250x1900x1330mm, approx. 350kg - 80/100 kW diesel burner with electronic temperature control - High-pressure pump: Comet RW/TW three-plunger pump with ceramic plungers - Operating hour counter - Manometer - Pressure regulator - Safety valve - High-quality frame made of painted steel with forklift slots - Covers made of stainless steel - Magnetic descaling device - incl. 20 m high-pressure hose, spray gun, lance, and flat jet nozzle 25° - Further accessories such as a frame for the water tank, water tank 300 or 500 l, water-sandblasting kit, surface cleaner, rotating nozzle, sludge suction pump, steam nozzle, weed control lance and bar available on request.

Condition: good (used), Heating fan, mobile heater, gas heater, gas blower -Power output: adjustable 50 kW Gbedpfx Akjb A Iwasysu -Connection pressure: 0.35-1.5 bar -Air flow rate: 1000 m³/h -Weight: 20 kg

Condition: good (used), Emulsion splitting plant, oil-water separation system The cost-effective and permanently reliable The solution to the problem is usually the oil/water- Gjdpfx Aob A I Dvokyebu Separation for dispersed condensates. Purified water meets legal requirements Regulations for sewer discharge -Dimensions: 500 x 1000 mm -Weight: 50 kg

Condition: good (used), Emulsion splitting plant, oil-water separation system The cost-effective and permanently reliable The solution to the problem is usually the oil/water- Separation for dispersed condensates. Purified water meets legal requirements Gbodpfjb A I Iksx Akysu Regulations for sewer discharge -Dimensions: 750/600/H950 mm -Weight: 80 kg

Condition: good (used), oil-water separation system, condensate separator, oil and water separator, oil separator, separator, oil/water separator, oil/water separator -Manufacturer: Kaeser, oil-water separator -Type: Aquamat 4 -Dimensions: 530/480/H1000 mm -Weight: 22 kg Gedpfx Akjv Aip Ujyjbu

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 240202088, total width: 1,300 mm, total length: 700 mm, total height: 2,550 mm, overall weight: 350 kg, water tank capacity: 120 l, noise level: 70 dB, input voltage: 400 V, water pressure: 200 bar, pump capacity: 14 l/min, working width: 1,100 mm, Equipment: type plate available, High-pressure washing booth (new installation), working area 1100mm x 650mm. Temperature range adjustable from 0-45°C. The system features a chip screen and filter. In the washing area, the system is equipped with a high-pressure lance and an air blow gun. Gedpjzlp Ifofx Akyebu Stainless steel AISI304, steam extraction, water level sensor.

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 7,500 kg, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE A dewatering screen is a vibrating screen used in industries such as mining, sand and gravel, and construction to remove moisture from a mud mixture. By separating the solid particles from the water, dewatering screens provide an efficient way to process materials while reducing water usage and improving the quality of the final product. • Model: FABO DSHC-1635 Type - Dewatering Screen - Capacity: 80-120 T/H - Size: 1650 x 3500mm - Screen Decks: 1 Deck 0.250 micron Polyurethane Screen - Screen Surface: 5.60 m2 - Screen Power/Spin: 2 x 7.5 kW 1000 rpm Vibro Motor - Screen Inclination angle: 8° - Stroke: 6-9 mm - Screen Side Sheet: ERD A1 Quality 12mm - Discharging pipe: 219 x 10 mm installation tube Godjzvxmljpfx Akyobu - Weight: 7500 kg FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, heating capacity: 350 kW (475.87 HP), Heating system, heating, chip heating Manufacturer Endress Type USF-W 350 Output 350 kW Year of manufacture 2010 with feed with ash discharge Gbsdpfx Aeznca Hjkyju with control

Condition: refurbished (used), 50 m³ / 50,000 l fire water tank according to DIN 14230 Tank volume: 50,000 liters / 50 m³ Length: approx. 10,700 mm Diameter: approx. 2,500 mm Weight: approx. 8,000 kg Material: Steel, grade S 235 JRG 2 Underground tank for underground storage, single- or double-walled, suitable for areas that can be walked and driven on (load class SLW 30) with 1 dome (outer diameter 720 mm) with a blind cover, gasket and screws. Available new or used, immediately! The container has been emptied, cleaned, completely overhauled and tested for leaks by us as a specialist company. The container complies with the requirements of DIN 14230 (Underground fire water tank): - Fire water suction connection according to DIN 14244 with a mounted fire hose coupling / fixed coupling A according to DIN 14319 in form B, without a level gauge connection - Vent flange stub in DN 100 with cap, with a total length of approx. 1,300 mm, suitable for 800 mm of ground cover and 500 mm above ground - Externally coated with bitumen for protection - If required, we can coat the tank with an internal full coating based on bitumen or epoxy resin (against corrosion) - It is also possible to line the container with a plastic inner liner Cost-effective delivery with our own truck is possible. Simply let us know the delivery address, and you will immediately receive the exact freight costs. Inspection is possible at any time by prior appointment. We can also offer trade-in and purchase of tanks/containers of all types. Please contact us for this. We also have the following sizes of these tanks constantly in stock: Gsdpfx Aehh Sprekyjbu - 10,000, 13,000, 16,000, 20,000, 25,000, 30,000, 40,000, 50,000, 60,000, 80,000 liters

Condition: refurbished (used), 80 m³ / 80,000 liter fire water tank according to DIN 14230 Tank volume: 80,000 liters / 80 m³ Length: approx. 12,780 mm Diameter: approx. 2,900 mm Weight: approx. 13,250 kg Material: Steel, grade S 235 JRG 2 Underground tank for underground storage, single- or double-walled, suitable for areas that can be walked and driven on (load class SLW 30) with 1 dome (outer diameter 720 mm) with a blank cover, seal, and screws. New or used, immediately available! The container has been emptied, cleaned, completely overhauled, and inspected for leaks by us as a specialist company. The container complies with the requirements of DIN 14230 (Underground fire water tank): - Fire water suction connection according to DIN 14244 with a mounted fire brigade coupling / fixed coupling A according to DIN 14319 in the form B design without a gauging port - Vent flange stub in DN 100 with cap, with a total length of approx. 1,300 mm, suitable for 800 mm ground cover and 500 mm above ground - Externally coated with bitumen for protection - Upon request, we can coat the tank with an internal full coating based on bitumen or epoxy resin (against corrosion) - It is also possible to line the container with a plastic inner liner Cost-effective delivery with our own truck is possible. Simply let us know the delivery address, and we will provide you with the exact shipping costs immediately. Inspection is possible at any time by prior appointment. If you require further information, please call us or send us an email to b.barth(at)barth-tank.de We can also offer trade-in and purchase options for tanks/containers of all kinds; please do not hesitate to contact us. We also have the following sizes of these tanks in stock: Gbedpfxjhh Sr Uo Akyeu - 10,000, 13,000, 16,000, 20,000, 25,000, 30,000, 40,000, 50,000, 60,000, 80,000 liters

Condition: refurbished (used), 150 m³ / 150,000 l fire water tank according to DIN 14230 Godpfx Akohh St Ijyebu Tank volume: 150,000 liters / 150 m³ Length: approx. 22,500 mm Diameter: approx. 3,000 mm Weight: approx. 32,000 kg Material: Steel grade S 235 JRG 2 Underground tank for underground storage, single- or double-walled, suitable for areas that can be walked on and driven over (load class SLW 30) with 1 dome (outer diameter 720 mm) with a blank cover, seal, and screws. Available new or used, ready for immediate delivery! The container has been emptied, cleaned, fully overhauled, and tested for leaks by us as a specialist company. The container complies with the requirements of DIN 14230 (Underground fire water tank): - Fire water suction connection according to DIN 14244 with a mounted fire hose coupling / fixed coupling A according to DIN 14319 in design B without a level indicator. - Vent flange stub with a cap, total length approx. 1,300 mm, suitable for 800 mm of soil cover and 500 mm above ground. - Externally coated with bitumen for protection. - Upon request, we can coat the tank with an internal full coating based on bitumen or epoxy resin (against corrosion). - It is also possible to line the container with a plastic inner liner. A cost-effective delivery with our own truck is possible. Simply let us know the delivery address, and you will receive the exact freight costs immediately. An inspection is possible at any time after prior appointment. If you require any further information, please call us or send us an email to b.barth(at)barth-tank.de. We can also accept and purchase tanks/containers of all types; please contact us for this. We also have the following sizes of these tanks constantly in stock: - 10,000, 13,000, 16,000, 20,000, 25,000, 30,000, 40,000, 50,000, 60,000, 80,000 liters.

Condition: refurbished (used), Fire extinguishing water tank according to DIN 14230 (underground fire extinguishing water tank): 40,000 liter fire extinguishing water tank for underground storage, single or double-walled, 1 manhole DN 600 with blind cover including seal and screws, outside with bitumen insulation - used - Gjdpfx Aevmz Idjkyobu Tank volume: 40,000 liters / 40 m³ Length: approx. 8,720 mm Diameter: approx. 2,500 mm Weight approx. 6,600 kg Material: steel material S 235 JRG 2 The tank has a fire extinguishing water suction connection according to DIN 14244 with a mounted fire brigade coupling/fixed coupling A according to DIN 14319 in the form B version without a dipstick. The tank also has a vent flange in NW/DN 100 with a cap with a total length of approx. 1,300 mm suitable for 800 mm of earth cover and 500 mm above ground. The tank is emptied, cleaned and was given a bitumen exterior coating by us at the factory If desired, we can equip the tank with a full internal coating based on bitumen (against corrosion) or an epoxy resin interior coating We are happy to offer you cost-effective delivery with our own truck. Simply let us know the delivery location and you will receive the exact freight costs immediately. A viewing is possible at any time by prior appointment. Trade-in and purchase of tanks/containers is possible, just talk to us about this. We of course always have such tanks in stock in the following sizes: - 10,000, 13,000, 16,000, 20,000, 25,000, 30,000, 50,000, 60,000, 80,000, 100,000, 120,000 liters

Condition: ready for operation (used), Year of construction: 1987, Recooling capacity at water flow temperature of 15/10°C: 2.3/2.1 kW Volume flow: 0.5 m³/h electrical Connection: 380 V, 1 kW Space requirement: 900 x 600 x 1020 mm Weight: 160kg Gjder Ezdrjpfx Akyebu Water connections reduced to 1/2".

Condition: refurbished (used), Year of construction: 2024, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 305 mm, warranty duration: 24 months, power: 30 kW (40.79 HP), OMAX MAXIEM 2040 3D, 30 kW MAXIEM Pump and A-JET Tilting Cutting Head Factory-refurbished with manufacturer certification and a two-year warranty. The waterjet cutting system configuration is freely selectable. Feel free to contact us and let us know your desired configuration. Customers searching for efficient and cost-effective waterjet cutting systems will find their ideal solution in the Modular Line MAXIEM. These powerful MAXIEM systems combine operational flexibility and affordability, and can be expanded with a broad range of accessories to suit your specific cutting needs. With the modular MAXIEM line, OMAX delivers advanced, reliable waterjet cutting technology at an economical entry price, thereby opening up the advantages of this technology to a wide array of application areas. Leasing with highly attractive terms is available on request, for example, for up to 86 months. - Accuracy up to ±0.05 mm - Software and machine components based on the latest OMAX standards With the 3D A-JET cutting head, the MAXIEM achieves cutting precision of under 0.1 mm. The 3D head enables bevel cuts up to 60° and compensates for cutting angle errors. Gedpfx Akorm Ilfeysbu The machine is currently being factory-refurbished; the images are thus similar to the actual offering. Prompt delivery can be arranged with INNOMAX AG.

Condition: excellent (used), mileage: 425,359 km, power: 265 kW (360.30 HP), first registration: 01/2001, fuel type: diesel, axle configuration: 6x2, fuel: diesel, color: red, driver cabin: day cab, gearing type: mechanical, suspension: steel-air, total length: 9,700 mm, total width: 2,530 mm, total height: 3,030 mm, Year of construction: 2001, = Additional options and accessories = - PTO = Notes = BELGIAN TRUCK, EX-FIRE DEPARTMENT 8000 LITER STAINLESS STEEL WATER TANK + MP10-1000 BRICK PUMP, 2003 PERFECT CONDITION = Further information = Technical information Number of cylinders: 6 Axle configuration Front axle: Steered; Suspension: Leaf spring Rear axle 1: Twin tires; Suspension: Air suspension Godszdlp Aepfx Akysbu Rear axle 2: Lift axle; Suspension: Air suspension Weights Unladen weight: 11,485 kg Payload: 14,515 kg GVW: 26,000 kg Maintenance, history and condition APK (Technical inspection): valid until 07/2027 Technical condition: very good Optical condition: very good Further information Please contact Thierry Leemans for more information.

Condition: used, Year of construction: 2008, OMAX 60120 P3060V 30HP (22kW) 4100 Bar EnduroMAX - machine including crank pump 30HP (22kW) 4100 Bar EnduroMax Gbjdpfxetmp T Do Akyju - working table 3656 mm x 1956 mm - X - Y axis travel 3200 mm x 1575 mm - air cushion (allows material to be cut while submerged) - control computer compatible with Windows 10 and OMAX Layout&Make Premium software - premium software - integrated diamond orifice head - OMAX 300kg abrasive feeder Full overhaul of the machine performed in 2024 (year of production 2008) Possibility to equip the machine with additional accessories for an extra charge.

Condition: used, Cooling unit, water-cooled condenser, DALEX Type DRF 2 Machine No. 38913719, Year of manufacture 1989 Flow rate 0.35 m3/h Cooling capacity 1950 Watts Operating pressure 2 to 3 bar Refrigerant R 134a; unit was converted from R12 to R134a Operating overpressure 18 bar Pipe connection thread 3/4" Tank volume 600 x 400 x 350 mm = approx. 80 liters Mains connection 380 Volts, 50 Hz Space requirement L x W x H 900 x 800 x 1020 mm Gbsdpjg D H Rujfx Akyju Weight 100 kg Good condition

Condition: used, Cooling unit, cooling water recooler, water chiller, chiller O. Hellwig Year of manufacture: approx. 1995 Cooling capacity: approx. 8 kW Gedopu R Ncepfx Akyjbu Rated power of cooling unit: 3 kW Refrigerant: R422D Water tank volume: approx. 35 liters Circulation pump flow rate: 40 liters/min Pump output: 0.63 kW Water connections: 1/2 inch Power supply: 380 Volt, 50 Hz - Temperature setting via rotary potentiometer Space requirement (L x W x H): 1100 x 750 x 140 mm Weight: 285 kg