Used Ilvet Continious Annealing Furnace for sale (815)

Condition: new, Year of construction: 2025, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Gusdpfxsfz I Rxo Ak Uog Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Year of construction: 2025, condition: new, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Guedpfxefzb Rcs Ak Ueg Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Condition: new, Year of construction: 2025, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ Gjdpfxsfzccne Ak Uoug 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Year of construction: 2020, condition: new, 7" Touchpad Large color touch panel looks aesthetically and uses comfortably and intuitively. Set on it all the important parameters.Memory 20 programs each with 10 events Gedpfx Ajfzkqmok Usug You can save up to 20 programs and activate up to 10 consecutive events time-temperature arranged in the heating curve. This is especially needed for the more demanding process.Information about consumption of power Consumption is calculated based on the settings of the burner. This feature will allow you to estimate the cost of the cycle, consumption and plan check staff.Recorder of cycle USB Each of the ovens is equipped with two-channel temperature recording on USB flash drive.. Each file is automatically created and is responsible for a separate cycle are recorded temperature extremes, hour and minute measurement. Files are saved in * .csv (Excel sheet) For all buyers the end of 2016 option is free, the competition for the option you have to pay up to several thousand euros. History 20 latest of burn Something's wrong? and perhaps too few overbroad elements from the oven? Now you check thoroughly oldest and lastest burning parameters, how often took, whether cycle proceeds without any problems, what was the consumption and when they ran. Start the oven automatically at 6 am How many times have you stay after hours and expecting end of the cycle? If you own a powder coating plan that works for a long time, You know exactly what we are talking about. With our solution you can leave cycle not cured in the oven, to automatically end when you come to the job next morning.

Condition: new, Year of construction: 2026, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ Gjdpfx Akofz Anpe Ujug 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Year of construction: 2020, condition: new, 7 "Touch Panel The large color touch panel looks aesthetically and is comfortable and intuitive to use. You will set all important parameters on it. Memory of 20 programs with 10 events It is possible to save up to 20 programs and activate up to 10 consecutive time-temperature events arranged in the heating curve. This is especially needed for more demanding processes. Information on gas / oil consumption The consumption is calculated based on the burner settings. This feature will allow you to estimate the cost of a given cycle, plan consumption and check personnel. Dual-channel recorder of USB cycle parameters Gsdpfefz U Tqjx Ak Ujug Each furnace is equipped with a recorder that records all firing parameters, including two temperature channels - like in an airplane black box, on a USB flash drive. The system also enables the analysis of monthly / daily statements, including media consumption and performance. Each start of heating, opening the door, can be recreated, a few years back. Such a dedicated option is not offered by any manufacturer. It is a system developed from scratch by our programmers Automatic smoke exhaust chimney The chimney can be programmed to open a few minutes before the end of the firing in order to smoke the chamber. It can be remotely controlled from the panel, it does not need to be done mechanically as in most structures. Minute forecast until the end The cycle has started, how long will it end? calculating the heating dynamics, we will count it and show on the display how much longer it will take. To open it, just pull the door. The lock has adjustable pressure of the door, to close it just push it, the lock will catch the door and automatically pull it back. In order to minimize the effect of heating the hall when opening the door, a hood is installed above the door to remove some of the heat to other places. The MTS system was created to provide a real reading of the temperature of the furnace chamber. Standard measurement is based on one temperature measurement which is often wrong.MTS is a system of many sensors located in the outermost places of the chamber. The multi-zone heating system ensures a firing quality that has been so far unique. Each normal oven has only one heating zone and only one temperature measurement! The multi zone heat system supports up to 8 independent heating zones in one oven. Each heating zone has as many as 3 temperature sensors! When there are temperature differences between zones, they are automatically equalized! The system helps to combat the problem when elements of different material thicknesses enter the furnace.

Year of construction: 2015, condition: new, Vertical furnace height: 1100mm useable diameter: 790mm outside diameter: 1560 mm outer height (without lid): 1480mm outer height (with lid): 2300mm electrically heated: 40 kW circulating fan: 2,2 kW three-phase supply: 400 V, 50 Hz temperature: max. 750°C Gjdpfxjcdi D De Ak Uoug

Year of construction: 1985, condition: used, Hardening furnace, Heraeus Type KM 260 Guedpjgtxuqsfx Ak Ueg Width 250 mm, height 150 mm, depth 500 mm Temperature up to 1150 °C

Condition: new, power: 14 kW (19.03 HP), inner dimension length: 1,000 mm, inner dimension width: 1,000 mm, inner dimension height: 1,000 mm, total length: 1,395 mm, total width: 1,600 mm, total height: 2,045 mm, overall weight: 400 kg, control type: NC control, actuation type: electric, fuel type: electric, continuous power: 14 kW (19.03 HP), Equipment: CE marking, ⭐⭐⭐⭐⭐ ⚡ Top Service ⚡ Fast Delivery ⚡ Professional Support! ✈️ Shipping costs are calculated separately according to the delivery address. Please contact us for an individual transport quote. ✅ Made to order ✅ Brand new, unused professional industrial product ✅ Proton Maschinenbau GmbH is the sole authorized European distributor for Matech products ✅ 2-year warranty ⏱️ Delivery time: approx. 4 weeks after receipt of payment Please also inquire about current stock availability. ➖➖➖➖➖ ⭐ Matech Powder Oven with Electric Heating – MATOVENB-101010 MATECH QUALITY – WITH PROTON SERVICE! ☘️ Compact ☘️ Efficient ☘️ Professional Curing ✅ Electrically heated powder oven ✅ Compact design for small and medium-sized workpieces ✅ Digital temperature control up to 220°C ✅ Adjustable curing temperature and curing time ✅ Automatic exhaust fan function adjustable ✅ Acoustic signal at the end of curing time ✅ Insulated door with special locking system ✅ Robust sandwich panel construction ✅ Excellent heat retention through strong insulation ✅ Timer function from 10 minutes to 24 hours ✅ Automatic shut-off after process completion ✅ Can be used with a mobile workpiece trolley ✅ Optional insert shelving system for small series ➖➖➖➖➖ ♨️ Also available with upgrade for up to 500 °C for high-temperature processes (optional) ➖➖➖➖➖ Technical Specifications: ✔️ Electric heating power: 12 kW ✔️ Blower output: 1,500 m³/h ✔️ Circulation fan: 0.75 kW ✔️ Total output: approx. 14 kW ±10% ✔️ Digital temperature control ✔️ Stepless temperature adjustment up to 220°C ✔️ Interior: 1.2 mm galvanized steel ✔️ Exterior: 1.2 mm powder-coated steel ✔️ Insulation: 150 mm ✔️ 50 mm rock wool + 100 mm glass fiber ✔️ Adjustable curing time ✔️ Adjustable exhaust fan function ✔️ Acoustic signal after process end ✔️ Control panel: 1 piece ➖➖➖➖➖ ⚙️ Optional Control Functions ✅ PID control for precise temperature management ✅ Touchscreen control panel and smartphone operation ✅ Ramp heating mode for defined temperature curves ✅ Storage of process parameters ✅ Weekly & monthly reports at the push of a button Godpewfpp Esfx Ak Usug ➖➖➖➖➖ ⚙️ Safety and Process Control Safety sensor for overheating prevention Automatic shut-off in case of fault Acoustic warning signals for errors Fume extraction via automatic ventilation ➖➖➖➖➖ ♨️ Ramp-Heating Mode (optional) Control temperature profile and holding times precisely, e.g.: • Reach target temperature in defined time • Hold at set temperature for desired period • Controlled cool-down to target temperature • Automatic notifications for process events ➖➖➖➖➖ ✅ No repeated settings required! The oven stores your process parameters – batch after batch. This saves you time and prevents errors. ➖➖➖➖➖ ✳️ Maintain your liquidity! We offer various financing models so you can flexibly plan your investment. Please contact us for information about leasing, hire purchase, or installment options. ➖➖➖➖➖ ✨ Buy directly from the official European distributor and secure the advantage of professional service and guaranteed quality! ✨ Custom dimensions or individual configurations are available on request. We are happy to design a suitable solution for your workshop. Inquire now – make your business ready for professional powder coating!

Condition: good (used), Year of construction: 2000, Matador MD 151 Bakery Oven - used - year of manufacture approx. 2000 - surface area 15 sqm - manual control - 5 chambers, each 1.8 x 1.6 m - hood with fan - machine from production - requires inspection/overhaul - overall technical condition good - collection from warehouse/shipping possible - price on request Guedpfx Aey Alhlek Ujg

Condition: excellent (used), Year of construction: 2016, Hein Universal Tube-Type Bakery Oven - Model: EA 2 6060 - Year of manufacture: 2016 - Area: 22 sqm - 6 chambers, each 1.8 x 2.0 m - Hood with fan Gujdpfxoxwwu Ds Ak Usg - Semi-automatic device Spider/Hewa - Vacuum cleaner - Computer control - Technical condition: very good - Self-collection from bakery or warehouse - Price on request

Condition: good (used), Wachtel Infra bakery oven – used – year of manufacture 2008 – surface area 8 sqm – 4 chambers of 1.2 x 1.6 m – manual control – steaming for each chamber – oven from production – good technical condition – collection from warehouse – price on request Gusdpfx Akex Hgxys Ujg

Year of construction: 2020, condition: like new (used), functionality: fully functional, conveyor belt length: 95,000 mm, Tunnel Type Enamel Cooking Ovens are based on the principle of hanging the workpiece to be fired on the oven conveyor and firing at maximum 1200C. These types of furnaces are internally rotating furnaces, after the workpiece is hung on the conveyor (maximum gross output 1 000 kg/h), it is provided to be fired (firing zone 10meters) or dried while traveling at a certain speed according to the thickness and m2 area of the part. Tunnel Type Enamel Cooking and Drying Ovens are specially designed with our expert engineering staff. Our Tunnel Type Enamel Cooking and Drying Ovens are also manufactured as assembled. Thanks to this feature, it can be easily assembled and moved to other areas if desired. In the industry, it is preferred by high-capacity production enterprises. Guodpfxovcdr Do Ak Usg

Condition: good (used), Year of construction: 2001, functionality: fully functional, type of input current: three-phase, Glass tempering furnace TAMGLASS, HTF-2136-ABT-10-R 3,8 – 19 mm, 2100 x 3600 mm, Right-Left Year: 2001. Without convection Noise reduction cabin included 400 V, 50 Hz, total power: 800 kW (heating 470 kW, motors 330 kW) Guodpfsvkhl Djx Ak Ujg In good technical condition. Inspection is possible by appointment.

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, total length: 23,000 mm, type of input current: AC, number of chambers: 1, Equipment: documentation/manual, Glass tempering furnace TAMGLASS / GLASTON, HTF-2442-CTA-10-L 2400 x 4200 mm, Left – Right Year: 1999. With convection (Low-E glass) Noise reduction cabin included. 400 V, 50 Hz, total power: 1160 kW (heating 630 kW, motors 530 kW) Gedpfx Aksylaqle Usug In good technical condition. Inspection during production is possible by appointment. Available: SEPTEMBER 2026

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, type of input current: AC, Equipment: documentation/manual, TAMGLASS / GLASTON HTF ProE – 2448-ADS-R 2400 x 4800 mm, 3 – 19 mm, Right – Left Glass tempering furnace (for Low-E glass) Year: 2006 Noise reduction cabin included Gedpfx Akoxtf Dfe Ueug 160 kW compressor for 3 mm glass included In good condition.

Condition: used, Year of construction: 1997, functionality: fully functional, type of input current: AC, Glass tempering furnace EFCO, 1500x3000 1500 x 3000 mm, Right – Left Guedexguqnspfx Ak Usg Year: 1997. 415 V, 50 Hz, 3 Ph. In good technical condition. Disassembled and ready for loading.

Condition: excellent (used), Year of construction: 2021, temperature: 1,000 °C, energy consumption: 10 kWh, Laboratory furnace / Glass tempering furnace Gedpfx Akoxcb Hnj Ueug Max temperature: 1000°C

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: seco, Used Heat Treatment Furnace for Aluminium Alloys Make: SECO WARWICK Model: SDBF-24.16.30/600E Guodpfx Ajx Tbf Uok Ueg Year of manufacture: 2014 EXPERIENCE SECO/WARWICK is a global leader in the development, design, and manufacture of furnaces and systems for the heat treatment of aluminium alloys. SECO/WARWICK has delivered numerous solution heat treatment, aging, and annealing furnaces for processing aluminium alloys from both wrought and cast materials. All technical solutions presented in this offer are proven and have already been successfully implemented by SECO/WARWICK in furnaces for a wide range of applications within the aluminium industry. A significant number of these furnaces have been supplied to the aerospace industry and meet their particularly stringent requirements as well as all relevant standards and regulations. CAPACITY The data provided by the customer forms the basis for the system design and also serves as the foundation for the guaranteed performance of the line. The system is designed for the heat treatment of aluminium pistons and cylinder heads.

Year of construction: 1990, condition: used, degree max 1800 Gusdpfx Ajrgbyvjk Uog total power requirement 5 kW

Year of construction: 1994, condition: used, max. temperature 1100 Grad voltage 230 V output 3 kw range - high tensile Innen 295x230x125 mm Gujdpfsthr Ncjx Ak Usg

Condition: used, functionality: fully functional, power: 60 kW (81.58 HP), fuel type: electric, operation weight: 500 kg, maximum load weight: 500 kg, Year of construction: 2020, operating hours: 400 h, machine/vehicle number: 2020-2704-0001, Vacuum-Controlled Plasma Nitriding Furnace Gsdpexz Divsfx Ak Uoug

Year of construction: 2000, condition: good (used), Temptec annealing furnace: Max workpiece size: approx. 1200 × 1200 × 1200 mm Godpfjx Tcmysx Ak Ujug Loaded for transport.

Year of construction: 1996, condition: used, functionality: fully functional, load capacity: 650 kg, IPSEN DAQ 7-8 Manufacturing Year : 1996 Heating : Gas Guodpfx Ajxivumek Usg Heaters : Recon 2 (x3) Charge Capacity : 650kg Brutto Charge dimensions : W:650mm L:1173mm H:550mm Protective Gasses : Endogas Ammonia Nitrogen The furnace can be operated with existing conditions.

Year of construction: 1997, condition: excellent (used), functionality: fully functional, machine/vehicle number: PP120/40, Hot Wall Pulsed Plasma Nitriding Furnace (tandem with 2 bases) Control system was refurbished in 2018 Furnace Model : Plateg PP120/40 Loading Dimensions Diameter : 1000 mm Height : 1250 mm Gsdpfx Akewmfyvo Uoug Max. Load Weight : 1000 kg (gross) Plasma Power : 40 kVA Heaters Power : 3x13,5 kW, (3 zones) Electrical Connection : 400V 3 phase 50 Hz