Used Ifm Reflective Light Barrier for sale (18,981)

Condition: used, axle configuration: 3 axles, first registration: 09/2008, loading space length: 9,700 mm, loading space width: 2,350 mm, loading space height: 2,165 mm, loading space volume: 50 m³, Chassis ALU chassis, aluminium alloy 5383H34 Two fully automatically welded T-profiles (width 200 mm) Corrosion protection between steel and aluminium components, continuous rubber bonded under pressure onto the longitudinal beams for maximum stability via integrated tipping bearing shaft with wear-resistant, pressed-in special bushes, chassis width approx. 1,600 mm, air and electrical lines integrated in a plastic conduit. Axles and Suspension, Disc Brakes Jost-disc axle assemblies 3 x 9 tons with DCA air suspension, lift and lower valve, load pressure gauge, 3rd axle automatically liftable Tyres and Wheels 6 wheels fitted with 385/65 R 22.5 tyres approx. 50–60% tread remaining, on silver steel rims, 11.75x22.5 ET 120 Lhsdpfx As Adxhieb Asn Landing Gear Mechanical support legs, 2 x 20 ton load capacity, pivoting feet used for air suspension systems Brake System In compliance with EC standards, dual-circuit Wabco system, spring-loaded parking brake acting on two axles, EBS-E system Wabco 2S/2M, with RSS system (Roll Stability Support), aluminium air tanks Electrical System According to German Road Traffic Licensing Regulations (StVZO) with two five-chamber Aspöck LED lights, 24V system with two 7-pin and one 15-pin sockets at front, EBS socket, LED side marker lights, 2 clearance lights, 2 separate LED reversing lights Tipping Body / Bin ALU bin, side walls with welded vertical aluminium profiles, floor approx. 6 mm thick wear-resistant aluminium alloy (5383H34), Brinell HB 110, front wall sloped design in 4 mm ALU with reinforcement profiles for tipping cylinder mount, side walls in 3 mm hard alloy, straight rear wall, universal door with automatic-pneumatic (lockable) swinging and 2/3-1/3 split hinged tailgate, double linkage, manufactured from 4 mm aluminium, 1 grain chute with water protection, wear plates on sides approx. 400-1,000mm x 3,000mm x 4mm Hydraulic System Hydraulic cylinder mounted on front wall with working pressure 150 bar, make: Edbro, with approx. 2 m hydraulic hose and 1" loose half-coupling Accessories 6 Parlok plastic mudguards with 2 Stas mud flaps, 3 m aluminium ladder, reinforced underrun protection in folding execution with 2 towing eyes, 1x folding side guard, walkway on front wall with side access ladder (left), 3 ALU hoops in pivoting design, 1x centre hoop support, rolling tarpaulin with central aluminium tube, rolling tarpaulin system, tarpaulin approx. 660 g/m², quick-release fastener (without tension belts), wheel spanner, 2x wheel chocks, toolbox type 800, continuous splash guard mounted on underrun protection, etc. Offer and pictures subject to change.

Condition: used, axle configuration: 3 axles, first registration: 04/2018, loading space length: 13,535 mm, loading space width: 2,480 mm, loading space height: 2,825 mm, loading space volume: 93 m³, Chassis: Reinforced, continuous chassis design, new. Superstructure: Self-supporting construction with corresponding reinforcements in the lower belt for particularly high stability and strength. Cross members, 140 mm high, reinforced design (for high ground load). Additional reinforcement as a gusset plate in the front lower belt/vehicle frame area. Chassis made of galvanized steel up to the support structure. (Semi-trailer construction, max. 39,000 kg) Axles and Suspension: "Disc brake 22.5" Jost (DCA) axle units, 3x9 tons with DCA air suspension, lifting and lowering function. Wabco Smartboard information center, electronic brake wear indicator (BVA) readable in the control unit (display). First axle with starting assist (new EC regulation, without control unit). Tires and Wheels: 6 wheels with tires size 385/65 R 22.5, approximately 50-60% tread, on Alcoa DuraBright rims, 11.75x22.5 ET 120. Kingpin: 2" kingpin, screwed into a 10 mm thick plate. Landing Gear: Mechanical landing gear with two speeds, 2x 20 tons support load with swivel base. Braking System: According to EC standards, EBS E-system Wabco with RSS system (Roll Stability Support) and premium modulator. Spring brake system acting on two axles, operated from the rear. Aluminum air tank system. Electrical System: According to EC standards 91/633 and 97/28 with 2 five-chamber lights, type Aspöck Europoint, integrated in the aluminum rear panel. 24-volt system with 1x15-pole and 2x7-pole socket. Side marker lights in LED design. 2 reflective panels on the rear. Front position lights 2x white, rear 2x red, 2 separate LED reversing lights integrated in the U-profile. 2 separate LED reversing lights on the sides, approximately at the level of the supports. Superstructure/Body: "Superstructure fully welded inside", reinforced side walls. Front wall load: 17,250 dkn, side and rear wall: 13,400/10,400 dkn. Aluminum body, side walls: 30 mm thick aluminum plank profiles (2-3 mm), 600 mm wide, fully welded with upper and lower belt. Plank profiles fully welded inside. Floor laid out as a sliding floor system on 140 mm aluminum cross members. Floor load approximately 9 tons/m2. Cross members mounted relatively close together (approximately 350 mm). Aluminum front wall with 600 mm plank profile, 2-3 mm thick, straight design. Special aluminum corner profiles in a sloping design. Smooth rear wall in a straight design with 2 aluminum wing doors, 50/30 mm thick, with 2 twist-lock fasteners, mounted in the welded aluminum rear frame with Teflon and stainless steel bearings. Doors secured in the open position with one chain each on the side. Moving residual unloading wall with Kevlar sheet, approximately 1,800 mm long, plus side sealing with Kevlar sheet. Aluminum wear plates on the sides and rear, approximately 2,000x1,500x4 mm. Service door in the front wall. Ljdpfx Abe Adxgxo Ajhn Hydraulic System: "Cargo - Floor" Sliding Floor System Sliding floor system in the floor with hydraulically moved aluminum profiles on aluminum square profiles with approximately 880 PE-HD sliders, plus anti-lifting slide bearings. Type CF, 10 mm floor, ribbed design. Hydraulics with approximately 200 mm working stroke. Locking units, type "Faster". Line size NW 21. Locking units with size and design to be specified. Operating pressure 190-max. 240 bar. Aluminum end pieces welded into the sliding floor. Electrical operation at the rear left with remote control integrated in a lockable, watertight box. Sliding floor rotated/wear

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Lsds Adzmhjpfx Ab Ajhn MACHINE DETAILS Machine dimensions Length: 700 mm Width: 600 mm Height: 1,000 mm Weight: 50 kg

Condition: used, Edwards Edwards iXH4545H – Industrial High-Vacuum/Dry Pump For sale is an Edwards iXH4545H, MK1 HV MM96 Black EMS version. This unit comes from a technical corporate environment and belongs to the high-performance iXH series from Edwards, which is used worldwide in industrial high-vacuum and coating processes. Device Data Manufacturer: Edwards Model: iXH4545H Version: MK1 HV MM96 Black EMS Weight: approx. 890 kg Technical Data (iXH series) Dimensions: approx. 1,240 × 860 × 1,310 mm (L × W × H) Pumping speed: up to approx. 4,500 m³/h (depending on gas and configuration) Ultimate pressure: < 1 × 10⁻² mbar Inlet: ISO 100 / ISO 160 Outlet: KF 40 / NW 40 Power supply: 400–480 V, 3-phase Power consumption: typ. 12–18 kW Cooling: water-cooled (approx. 6–10 L/min) Description: The Edwards iXH4545H is an industrial high-vacuum/dry pump from the 4500 series. It is typically used in: PVD / CVD coating Semiconductor industry Process chambers / vacuum furnaces Research & Development Applications with high gas load Lsdpfx Ajzixyfob Aehn Chemical/corrosive process gas environment The iXH series is known for its high reliability, robust design, and 24/7 operability. Weight: approx. 890 kg Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have over the phone.

Condition: used, Iridex Type: Iridex OcuLight SLx Laser: IRIDEX Oculight SLx Tri-Mode 810 nm diode laser Description: Designed for longevity, with a thermal management system to enhance laser conversion efficiency and reliability. Ledpezd Uubefx Ab Aohn Improved user interface with conveniently arranged, easy-to-understand controls. Enables easy transport between rooms and offices. The Tri-Mode capability offers three different laser energy delivery modes: CW-Pulse, MicroPulse, and Long-Pulse. An extremely ergonomic user interface, infrared wavelength, and a wide range of delivery systems provide a broad spectrum of treatment options. Well-suited for retinopathy of prematurity and end-stage glaucoma. The CW-Pulse mode delivers energy in single or repetitive exposures. The LongPulse mode delivers laser energy over extended periods. The MicroPulse mode delivers laser energy in a series of short pulses, allowing for fine control of thermal effects. Features: Application area: ophthalmology Amplifier medium: solid-state Ergonomics: table-top device Wavelength: 810 nm Treatment laser power: infrared diode laser 810 nm, 0–3000 mW Target laser power: red diode laser 650–670 nm, 0 to < 1.0 mW Delivery devices: EndoProbe, TruFocus LIO, portable SLAs, DioPexy, G-Probe, Large-Spot SLAs, LIO, and OMAs Exposure durations: CW-Pulse 10-9000 ms, MicroPulse 0.1-1.0 ms, LongPulse 10s-30 min No external air or water cooling required Weight: 6.4 kg Length: 10 mm Width: 30 mm Height: 30 mm Clinical applications: The Oculight SLx laser system can be used to perform retinal photocoagulation and glaucoma procedures. While this infrared laser (810 nm) can be used for conventional photocoagulation, it also offers some unique treatment options, such as: transscleral retinal photocoagulation for retinal tears and detachments, transscleral cyclophotocoagulation for refractory glaucoma, transpupillary thermotherapy photocoagulation for choroidal lesions, and MicroPulse photocoagulation below the threshold for diabetic retinopathy and age-related macular degeneration (AMD). Laser Indirect Ophthalmoscope (LIO) The TruFocus Laser Indirect Ophthalmoscope (LIO) is ideal for patients who are best examined and treated in a supine position. It features a unique optical design that eliminates the need to adjust the laser focus and allows for a wide range of working distances. Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Year of construction: 2013, machine/vehicle number: 1584.18, functionality: fully functional, pressing force: 160 t, stroke length: 700 mm, table width: 2,000 mm, table length: 1,400 mm, table height: 800 mm, total length: 2,000 mm, total width: 3,200 mm, total height: 5,000 mm, overall weight: 28,000 kg, Equipment: documentation/manual, Hydraulic 4-column press – 160 T – 2,000 × 1,400 mm For sale is a hydraulic 4-column press from the manufacturer HYMAG with a maximum pressing force of 160 T. The machine has a table size of 2,000 × 1,400 mm, a maximum installation height of 1,200 mm, and a stroke of 700 mm, making it suitable for forming, straightening, upsetting, and assembly operations in industrial applications. ##### Technical data + information: Hydraulic 4-column press – 160 T – 2,000 × 1,400 mm ==== General information - Reference ID: TPT-06 - Manufacturer: HYMAG - Design: Four-column press - Model: HS 4-160 K - Machine number: 1584.18 - Year of manufacture: 2013 - Pressing force: 160 T - Rated force: 1,600 kN - Table size (working area): 2,000 × 1,400 mm - Plunger plate size: 2,000 × 1,400 mm - Table height: 800 mm - Open height: 1,200 mm - Stroke: 700 mm - Front clearance: 2,010 mm - Side clearance: 900 mm - Overall height: 5,000 mm - Overall width: 3,200 mm - Overall depth: 2,000 mm - Total weight: 28 T - Basement required: no ==== Hydraulic cylinder - Stroke: 700 mm - Max. working pressure: 305 bar - Return speed (downward): 220 mm/s - Return speed (upward): 150 mm/s - Pressing speed: 45 mm/s ==== Hydraulics & Drive - Main motor: 55 kW - Additional hydraulics: 7.5 kW - Oil tank: 500 l - Hydraulic oil: ISO VG 46 - Pump type, main unit: V30D-115-RKN - Pump type, additional hydraulics: PGH4-2X/025 - Oil-air cooler: TFS/A-20-400 - Stepless pressure control via proportional valves - Stepless speed control via proportional valves - Actual pressure display in the PLC - Quick traverse cylinder with after-suction/locking valve - Oil-air cooler with its own circulation pump (45/75 °C) - Additional hydraulics: 130 bar - 2 double-acting tool cylinders - Tool cylinder speed: approx. 50 mm/s at Ø 100 mm ==== Tooling - T-slots: 9 - T-slot design: M20 according to DIN 650 ==== Control system - Control: Siemens SIMATIC C7 - Control panel: on the frame - Stepless pressure control - Stepless speed control ==== Safety - Light curtain/light barrier: available - Two-hand operation: available - Safety control: available - CE-compliant design - Dwell time: 70 ms - Dwell travel: 118 mm ==== Electrical connection - Operating voltage: 400 V Lhedpj Adz Ulofx Ab Aen - Main motor current consumption: 105 A - Main motor speed: 1,450 rpm - Additional hydraulics voltage: 400 V - Additional hydraulics power: 7.5 kW - Additional hydraulics current consumption: 15 A - Cooling motor power: 1.5 kW - Cooling motor voltage: 400 V - Cooling motor current consumption: 5.1 A ##### Application areas: Forming, deep drawing, straightening, upsetting, assembly work, toolmaking, mold making, mechanical engineering, metalworking, contract manufacturing, series production (Hydraulic 4-column press, four-column press, 4-column press, hydraulic press, HYMAG, HYMAG HS 4-160 K, 160 T press, 160 ton press, forming press, deep drawing press, straightening press, upsetting press, assembly press, industrial press)

Condition: refurbished (used), functionality: fully functional, Year of construction: 2025, operating hours: 300 h, machine/vehicle number: C15_202500018, stroke length: 270 mm, operating speed: 100 mm/s, reverse speed: 100 mm/s, overall weight: 2,800 kg, pressing force: 44 t, year of last overhaul: 2026, Equipment: CE marking, angle measuring system, documentation/manual, safety light barrier, Electric Press Brake C15 - IRIS+ Angle Measuring System CoastOne - Made in Finland Lhodps Ad Adhjfx Ab Aen Year of manufacture: 2025 - Project machine Press force: 44T Bending length: 1600mm Spindles: 2 x 22T Control: TC15-2D graphic Light barrier: Lazersafe IRIS+ angle measuring system Backgauge: 5-axis controlled X-R-Z1-Z2-Dx axes Tool holder: Manual type WILA / TRUMPF / Type B Light working area front and rear Front support table - height adjustable Dual foot pedal for opening and closing the Y-axis 1 set of press brake tools included 36-month warranty after installation Delivery extra; immediately available Viewing under power possible at any time by appointment!

Condition: new, empty load weight: 1,700 kg, overall weight: 3,500 kg, color: grey, Year of construction: 2026, Equipment: hydraulics, Brand new sales trailer / contrailer – the perfect combination of a flexible food truck and a spacious container. Get started right away with the perfect combination of a flexible food truck and a spacious catering container. Thanks to the hydraulic lowering system, the trailer can be easily lowered to ground level at any location, allowing your customers barrier-free access at eye level. Your advantages at a glance: ✨ Condition: Brand new (year of manufacture 2026), ready for immediate use. ❄️ Insulation: Isothermal construction made of aluminum-fiberglass laminate for an optimal room climate in any season. 🔥 Professional kitchen (NEW): High-end gas appliances from Bertos. ✨ Location flexibility: Simply tow with the vehicle and lower it directly to ground level using hydraulics. 🚚 Ready for immediate use: Including TÜV inspection and complete report. 🛡️ Safety: 1 year warranty on the entire kitchen installation. 💳 Flexible financing: Attractive lease-purchase and leasing options available. 🛠️ Individually customizable: We will implement your desired equipment, different lengths or additional serving hatches on request. Technical data: Dimensions of the body: 4,450mm x 2,400 x 2,495 mm (L x W x H) Weight: Unladen weight 1,700 kg | Permissible total weight 3,500 kg Color: Anthracite / Gray Lhsdpfx As Ad Iguob Ajn Professional catering equipment (NEW): 🔥 Professional gas appliances (brand Bertos): Gas fryer "Bertos", 2 x 8 liter bowl capacity, dimensions (W x D x H) 600 x 600 x 290, output: 13.2 kW, made of stainless steel, with drain tap, GL8+8B Gas stove "Bertos" with 4 burners, dimensions (W x D x H) 600 x 600 x 290, output: 12.4 kW, made of stainless steel, G6F4B Gas grill "Bertos", smooth plate, dimensions (W x D x H) 600 x 600 x 290, output: 8 kW, made of stainless steel, G6FL6B ❄️ Cooling & Hygiene: Refrigerator with glass door (perfect for beverages) Small under-counter refrigerator "Liebherr" Large combination refrigerator "Liebherr" 💧 Water system: Water system with water canisters, 30 liter capacity, with fresh and wastewater canisters Two stainless steel sinks with faucet Hygiene package consisting of a folding towel dispenser and a soap dispenser 10-liter hot water boiler Pump ⚡ Lighting: LED lighting on the ceiling LED lighting with color changing effect around the serving hatch with remote control Emergency light ✨ Safety & Extras: Serving counter and work surfaces made of brushed stainless steel Insulating wall at the cooking area (fireproof) Exhaust hood made of labyrinth filters Non-slip floor for catering Splash guard optional Built-in insulated generator cabinet On-site inspection in Saarbrücken possible at any time by appointment. Contact us now for a customized offer or a demonstration of the hydraulics!

Condition: used, Year of construction: 1997, machine/vehicle number: 835, functionality: fully functional, pressing force: 200 t, stroke length: 400 mm, table width: 890 mm, table length: 1,460 mm, table height: 600 mm, total length: 1,800 mm, total width: 2,120 mm, total height: 3,550 mm, overall weight: 12,500 kg, Equipment: documentation/manual, Oil-hydraulic 4-column forming machine – 200 T – 1,460 × 890 mm For sale is an oil-hydraulic 4-column forming machine from August Luigart & Sohn GmbH u. Co. KG with a maximum pressing force of 200 T. The machine has a table size of 1,460 × 890 mm, a maximum installation height of 800 mm, and a stroke of 400 mm, making it suitable for forming, stamping, straightening, and assembly work in industrial applications. ##### Technical data + Information: Oil-hydraulic 4-column forming machine – 200 T – 1,460 × 890 mm ==== General information - Reference ID: TPT-08 - Manufacturer: August Luigart & Sohn GmbH u. Co. KG - Design: Oil-hydraulic 4-column forming machine - Model: 4 SPY 200 SO - Machine number: 835 - Year of construction: 1997 - Pressing force: 200 T - Rated force: 2,000 kN - Table size (working area): 1,460 × 890 mm - Table height: 600 mm - Open height: 800 mm - Installation height: 800 mm - Stroke: 400 mm - Ram width: 1,460 mm - Lateral passage: 450 mm - Total height: 3,550 mm - Total width: 2,120 mm - Total depth: 1,800 mm - Total weight: 12,500 kg - Max. upper tool weight: 2,500 kg ==== Hydraulic cylinder - Number of cylinders: 1 - Cylinder diameter: Ø 300 mm - Piston rod diameter: Ø 270 mm - Guide column diameter: Ø 160 mm - Stroke: 400 mm - Max. working pressure: 285 bar Lodpo Ad Hayofx Ab Ashn - Return speed downwards: 200 mm/s - Return speed upwards: 251 mm/s - Pressing speed: 37–11 mm/s - Setting speed: 10 mm/s ==== Hydraulics & Drive - Main motor: 32.5 kW - Oil tank: approx. 850 l - Hydraulic oil: HL / HLP ISO VG 46 - Oil filter fineness: < 25 µm - Max. oil temperature: 60 °C - Vibration damper: EFFBE LM 7-100 - Foundation according to manufacturer's specifications required ==== Tooling - Number of T-slots: 5 - T-slots: T22 M20 according to DIN 650 ==== Control - Control: no PLC - Control panel: on the frame - Light curtain / light barrier: available - Two-hand operation: available ==== Safety - Decay time: 82 ms - Decay distance: 164 mm - Safety distance: 13 mm - Protective grid: available - CE-compliant design ==== Electrical connection - Operating voltage: 415 V - Power supply: 3PEN - Frequency: 50 Hz - Conductor cross-section: 25.0 mm² - Fuse rating: 80.0 A - Rated current: 64.2 A - Control voltage: 230 V AC - Valve voltage: 24 V DC ==== Environmental conditions - Ambient temperature: +5 to +40 °C - Relative humidity: 30–95 % (non-condensing) - Installation altitude: max. 1,000 m above sea level - Noise level: < 70 dB(A) ##### Application areas: Forming, stamping, straightening, embedding, assembly work, toolmaking, mold making, metalworking, mechanical engineering, contract manufacturing, series production (Oil-hydraulic 4-column forming machine, 4-column forming machine, hydraulic press, August Luigart press, 4 SPY 200 SO, 200 T press, 200 ton press, forming press, stamping press, straightening press, embedding press, industrial press)

Condition: new, neu ca. 12 - 14 Wochen ab Auf Türkei 236800 € 30 to 2500x1250 mm 2500 mm 1250 mm 116 m/Min 80 m/Min 140 m/Min 40 mm 1200 1/Min 425 1/Min Lhodpeynnayefx Ab Aen 3200 1/Min 6 mm 3 mm 3 mm 1.5 mm 27 0,1 mm 0,05 mm 22 U/Min 150 U/Min 120 kg 940 mm 6 bar 88.9 mm 15 kW 5750 mm 6800 mm 5360 mm 7360 mm 2310 mm 12960 kg Control unit DURMA CAD-CAM software Programming on the control panel Remote diagnostic function Automatic clamp positioning Network Ethernet communication Automatic tool lubrication UPS for control panel Movable scrap box Brush table Oil Cooler USB Driver Command pedal Web cam for service Reposition on X axis Alignment Tools for Index Station D Manual nesting turret (27 stations without tool and holder): 11 x A-Station fix: 0,8-12,7 mm 11 x B-Station fix: 12,8 - 31,7 mm 2 x C-Station fix: 31,8 - 50,8 mm 1 x D-Station fix: 50,9 - 88,9 mm 3 x D-Station index: 50,9 - 88,9 mm Infra-red light barriers according to CE rules Price FCA Türkiye

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 8,000 kg Lifting height: 4,050 mm Fork length: 2,400 mm Mast: Duplex mast, free-lift mast without a central hydraulic cylinder Hydraulics: 3rd and 4th valve Fork adjustment: Hydraulically adjustable Side shifter: Present MACHINE DETAILS Manufacturer: Linde Type: H80/900T Year of manufacture: 2019 Drive type: LPG Operating hours: 16,052 h Own weight: 13,860 kg Overall length: 6,350 mm Overall width: 2,300 mm Overall height: 3,380 mm Front tires: Dual tires EQUIPMENT Fork positioner with side shifter Multiple pallet fork Full cabin Air conditioning Heating Windshield wiper Roof window LED work light (front) LED work light (rear) Safety light (front) Safety light (rear) Comfort seat with lumbar support Seat heating LPG gas tank Color display Tilt angle indicator Lot number: 13 Collection conditions: Side loading up to 6 tons is possible with a large forklift on site. Loading is done at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Ljdpfx Abs Ad N A De Ajhn Collection without prior registration is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Outstanding storage fees must be paid in full before collection.

Condition: used, Year of construction: 2008, machine/vehicle number: 1540.18, functionality: fully functional, pressing force: 160 t, stroke length: 700 mm, table width: 2,000 mm, table length: 1,400 mm, table height: 800 mm, total length: 2,000 mm, total width: 3,200 mm, total height: 5,200 mm, overall weight: 28,000 kg, Equipment: documentation/manual, Hydraulic 4-column press – 160 T – 2,000 × 1,400 mm For sale is a hydraulic 4-column press from the manufacturer HYMAG with a maximum pressing force of 160 T. The machine has a table size of 2,000 × 1,400 mm, an open height of 1,200 mm, and a stroke of 700 mm, making it suitable for forming, straightening, pressing, insert molding, and assembly operations in industrial applications. ##### Technical data + information: Hydraulic 4-column press – 160 T – 2,000 × 1,400 mm ==== General information - Manufacturer: HYMAG - Type: Hydraulic 4-column press - Model: HS 4-160K - Machine number: 1540.18 - Year of manufacture: 2008 - Pressing force: 160 T - Table size (working area): 2,000 × 1,400 mm - Table height: 800 mm - Open height: 1,200 mm - Stroke: 700 mm - Overall height: 5,000 mm - Overall width: 3,200 mm Lhodpfx Abe Adtl Ae Aon - Overall depth: 2,000 mm - Overall weight: 28 T - Basement required: no ==== Hydraulic cylinder - Stroke: 700 mm - Max. working pressure: 280 bar - Return speed downwards: 220 mm/s - Return speed upwards: 150 mm/s - Initial pressing speed: 45 mm/s ==== Hydraulics & drive - Main motor: 55 kW - Auxiliary hydraulics: 7.5 kW - Oil tank: 600 l - Pneumatic pressure accumulator: yes ==== Control - Control: SIEMENS SIMATIC C7 - Control panel: pendant control panel - Two-hand operation ==== Safety - Blanking force limitation - Maintenance platform - Emergency stop - Light curtain / light barrier - Protective grating - Separate control cabinet ##### Application areas: Forming, deep drawing, straightening, insert molding, assembly work, toolmaking, mold making, mechanical engineering, metalworking, contract manufacturing, series production (Hydraulic 4-column press, 4-column press, hydraulic press, HYMAG, HYMAG HS 4-160K, 160 T press, 160 ton press, forming press, deep-drawing press, straightening press, insert molding press, assembly press, industrial press) Are you looking for a hydraulic press tailored to your specific application? Contact us for a customized quote. Our hydraulic presses are manufactured according to German and European Machinery Directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they meet all points of the national Brazilian safety guideline NR 12, which is based on them. Our core strength lies in the design and construction of custom-made machines and press automation. We distribute customized hydraulic presses at surprisingly affordable prices. Predominantly, components from leading European manufacturers are used for the hydraulics of the presses.

Condition: new, neu ca. 8 Wochen ab Auftragse Türkei 3100 mm 6 mm 4 mm 50 mm 15 1/min 1.5 ° 16 14 to 1000 mm 200 mm/s 15 kW 200 l 2 Stk. 865 mm 500 mm 3515 mm 4110 mm 2200 mm 3700 mm 2100 mm 7300 kg Swing cut construction NC-preselection system D-touch 7 with touch screen for back gauge, cutting length, quantity, USB port Motorized back gauge 1000 mm on ball screws, folding upwards Clear control panel mounted on moveablearm Hydraulic hold down pistons are arrangedclose to the cutting edge Foot switch Central, manual blade gap adjustment Cutting line illumination Broad table with balls Piece counter Single and continous stoke Fold up finger guard 1.000 mm 1 squaring arm 1. 500 mm with scale,T-slot and tilting cam 2 supporting arms 1.000 mm with T-slot Lodpfx Abjwiqyye Aehn Simple replacement and grinding of theblades Variable adjustable cuttinglength for economic processing Lower blade fourfold turnable Upper blade double turnable Oilfilling Light barrier on the back of the machine Qualified customer support User manual in GERMAN and ENGLISH according to CE rules

Condition: new, neu ca. 12 - 14 Wochen ab Auf Türkei 87900 € 1661.31 € 4100 mm 13 mm 8 mm 350 mm 8 1/min 1.75 ° 18 62 to 1000 mm 200 mm/s 30 kW 330 l 3 Stk. 818 mm 550 mm 4520 mm 5350 mm 2250 mm 3650 mm 2250 mm 16300 kg Swing cut construction NC-preselection system D-touch 7 with touch screen for back gauge, cutting length, quantity, USB port Motorized back gauge 1000 mm on ball screws, folding upwards Clear control panel mounted on moveablearm Hydraulic hold down pistons are arrangedclose to the cutting edge Foot switch Central, manual blade gap adjustment Cutting line illumination Broad table with balls Piece counter Single and continous stoke Fold up finger guard 1.000 mm 1 squaring arm 1. 500 mm with scale,T-slot and tilting cam 2 supporting arms 1.000 mm with T-slot Simple replacement and grinding of theblades Lhodpswirynjfx Ab Ajn Variable adjustable cuttinglength for economic processing Lower blade fourfold turnable Upper blade double turnable Oilfilling Light barrier on the back of the machine Qualified customer support User manual in GERMAN and ENGLISH according to CE rules (sample photo) WE HAVE MORE THAN 850 REFERENCES!

Condition: new, axle configuration: 3 axles, loading space volume: 55 m³, total length: 10,520 mm, total width: 2,300 mm, total height: 3,990 mm, suspension: air, tire size: 385/65-22,5, color: green, Equipment: ABS, - EBS Brand New from PAVIC. Available Immediately! PAVIC 3-Axle 55 m³ Tipping Trailer with Lift Axle Technical Specifications: Coupling height: 1250 mm Length: approx. 10,522 mm Width: approx. 2300 mm Height: approx. 2380 mm Technical load capacity of the axle group: 27,000 kg Technical load capacity of the kingpin: 12,000 kg Unladen weight: 8,520 kg CHASSIS: Heavy-duty and particularly durable I-beam main chassis; made of high-strength MC700 steel, welded using an automatic robotic welding process. TIPPER BODY: Volume: 55 m³ Base plate: HARDOX450, thickness 5 mm Side walls: HARDOX450, thickness 4 mm Front wall: HARDOX450, thickness 4 mm Rear door: HARDOX450, thickness 4 mm In the front area, a resonator/vibrator is installed under the body to loosen compacted material when the body is tilted (see pictures). TIPPER BODY: Tipper body design with hydraulic tailgate. Suitable for agriculture, forestry, recycling (scrap metal), and more. HYDRAULIC CYLINDER (STROKE): Heavy-duty hydraulic cylinder (HYVA – C brand), single-circuit. AXLES: 3 x 9-ton axles SAF CD (BI9–22S) with disc brakes (SBS2220) SUSPENSION: Air suspension. LIFT AXLE: Automatic lift axle on the 1st axle. TIRES: 6 x 385/65R22.5 (brand-name tires) RIMS: 6 x steel rims BRAKE SYSTEM: WABCO brake system 2-line brake system according to EC regulations EBS 2S/2M Pneumatic parking brake 1 x yellow air coupling 1 x red air coupling 1 x brake pressure valve TPMS (Tire Pressure Monitoring System) Lhjdo Adyi Uspfx Ab Aen KINGPIN: 1 position, 2” (JOST or SAF brand) SUPPORT LEGS: Mechanical aluminum support legs. Both support legs are operated via a locking mechanism (after coupling). ELECTRICAL SYSTEM: Voltage: 24 V 2 x 7-pole and 1 x 15-pole ISO connectors EEC-compliant lighting according to standard: SAE tail lights Side marker lights Brake warning lights Rear signal lights Lighting ASPÖCK (EUROPOINT III): 2 combined tail/brake lights (red) 2 combined turn signal lights (orange) 1 license plate light ACCESSORIES: 6 x mudguards 2 x splash guards 2 x reflective strips and reflector signs at the rear and sides 1 x rear underrun protection 2 x chock blocks with holders 1 x side aluminum protection 1 x toolbox 1 x work platform (painted and bolted) 1 x roll-up tarpaulin (incl. mechanical retaining bar) PAINTING: Surfaces are smoothed and cleaned before painting. Then: sandblasting according to SA 2.5, followed by: 2 coats of primer 2 coats of acrylic topcoat RAL colors: Chassis (KTL): Black Body: Green (similar to RAL 6016, yellow-green) Our sales team is available to answer any further questions. This is a non-binding offer. Subject to prior sale, errors and changes. General information Year of manufacture: 2026 Design year: 2026 Axle configuration Tire size: 385/65-22,5 Brakes: Disc brakes...

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2026, operating hours: 10 h, control type: CNC control, degree of automation: automatic, actuation type: electric, laser type: fiber laser, laser source manufacturer: MAX Photonics, laser power: 3,000 W, laser wavelength: 1,070 nm, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 10 mm, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, compressed air connection: 8 bar, overall weight: 2,800 kg, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, Laser cutting machine with 3kW fiber laser / eco line Exhibition machine with few operating hours (approx. 10 hours) Our goal is to offer high-precision, long-term stable, and yet affordable laser machines. Our machines are ideal for workshops and repair shops. A perfectly developed cutting parameter library is included in the scope of delivery, as well as first-class service. The super-affordable entry into laser cutting technology - Designed specifically for steel and stainless steel processing Exhibition machine with very few operating hours - High-quality MaxPhotonics laser source - Extremely energy-efficient cutting system - Requires only approx. 3.0 x 3.0 meters of floor space - Top quality, schedule a viewing now! Cutting of steel sheets up to 20mm Cutting of stainless steel sheets up to 10mm - Travel range approx. 1300 x 1300mm - Size of the support table: approx. 1300 x 2500mm (i.e., an entire medium-format sheet fits into the machine) - Machine control in German - Automatic front door (secured with a light barrier) - Extensive collision protection measures - Large front window for observing the cutting process - Programmable, proportional valve for oxygen - Incl. cutting parameter file - Incl. drawer module - Very easy to operate. - Powerful laser chiller - Incl. extensive wear parts package The sale is exclusively to commercial businesses. Delivery / Consulting / Sale only in Germany / Austria / Switzerland Machine dimensions approx.: Width: 3.2m Height: 2.3m Length: 3.3m Total weight: approx. 3400kg Leasing or hire purchase is possible via our financing partner. Do you need a different laser power, table shape, or table size? No problem. I will gladly create a suitable offer. Lhsdpfsy A Tu Tox Ab Aen Are you not sure which laser power is suitable for your application? Of course, I will carry out cutting tests according to your requirements. There is a lot possible here. From 0.5 kW to 20kW laser power.

Condition: ready for operation (used), ABA-WERK Aschaffenburg - Hand lever - FFK surface grinding machine -Magnetic clamping plate: approx. 300 × 150 mm -Working area: approx. 350 × 150 × 150 mm -Grinding length: approx. 350 mm -Grinding width: approx. 150 mm -Max. workpiece height: approx. 150 mm -Grinding wheel dimensions: approx. Ø 200 × 20 × 76 mm Lsdpfx Abszr U Svo Aehn -Grinding spindle speed: approx. 2,800 rpm -Longitudinal table adjustment: manual -Transverse table adjustment: manual -Height adjustment: manual -Magnetic clamping plate: permanent magnet -Machine feet -Grinding wheel guard -Extraction system -Work light -Documentation Dimensions: L x W x H 1.1 x 1.1 x 1.7 meters / Weight 800 kg Errors and omissions excepted.

Condition: excellent (used), functionality: fully functional, input voltage: 380 V, total length: 1,200 mm, total width: 800 mm, overall weight: 100 kg, Equipment: documentation/manual, Hydraulic hand grinder, Hydraulic power unit, 80 liters Motor, 4.0 kW, 380V Speed control via flow regulator, working speed approx. 2500 rpm Central water supply through the shaft Threaded connection: M 24 Length of hydraulic hoses: 13.0 m Lhjdpfx Aszv Tagjb Ajn Weight of the grinder: approx. 3.8 kg

Condition: ready for operation (used), functionality: fully functional, Universal tool grinding machine DECKEL S 11 with accessories & tool cabinet -Grinding stroke 190mm -Grinding stroke during orbital grinding 190mm -Longitudinal adjustment of the grinding spindle approx. 5mm -Vertical adjustment of the grinding head approx. 320mm -Transverse adjustment of the tool slide approx. 100mm -Adjustment ranges: -Grinding head carrier approx. 800mm -Tool carrier approx. 215mm Lodjzx R Awspfx Ab Aehn -Universal / dividing head approx. 330mm -Swivel angle / grinding head carrier 360 degrees / grinding head 360 degrees / tool carrier 360 degrees -Clamping surface of the tool slide approx. 500x180mm -Max. workpiece diameter between centers 130mm -Max. workpiece diameter / overhanging clamping (universal dividing head) 620mm -Digital display -Measuring optics -Further accessories (SEE PICTURES) -Documentation -Tool cabinet Errors and omissions excepted.

Condition: used, Year of construction: 2022,

Condition: used, functionality: fully functional, roll diameter: 50 mm, total width: 1,300 mm, total height: 85 mm, total length: 2,930 mm, conveying length: 2,930 mm, TAF article number: 1000004158 (220864) Manufacturer: unknown Year of manufacture: unknown Overall dimensions: approx. 2,930 x 1,300 x 85 mm (LxWxH) Cheek width: 1,300 mm Cheek height: 80 mm Conveyor length: 2,930 mm Conveyor width: 1,230 mm Roller type: Plastic Rollers per axle: 1 piece, 2 axles per row Roller pitch: 55 mm Roller diameter: 50 mm Lhsdpfx Aev Hffgeb Aen Drive: Gravity Condition: Used / fully functional Function test: OK

Condition: like new (used), For sale is a Hammer edge sanding machine HS950, with a belt length of 2515 mm. The machine is in good condition and has been inspected by our specialist staff. - Belt length: 2515 mm - With oscillation motor - Tiltable 0 - 90° Lhsdsw Hf D Iepfx Ab Aen - Motor power: 2.2 kW / 3 HP - Year of manufacture: 2024 - Demonstration machine The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Info Tel. 06244-20299 Related terms: edge sanding machine, sanding machine, surface finishing Reference: R-A0117

Condition: used, This listing is for a Roche LightCycler II Thermal Cycler Parts Only Lodpfexzgubsx Ab Aehn

Condition: used, This listing is for 1 of 3 Roche LightCycler II Thermal Cycler Lhedpfx Absxzguhs Aen

Condition: used, This listing is for 1 of 2 Roche LightCycler 1.5 Thermal Cycler Lodpfx Aoxzgunsb Aehn