Used Horstkemper 600 X 3400 Mm for sale (93,190)

Condition: refurbished (used), Year of construction: 2013, functionality: fully functional, power: 18.5 kW (25.15 HP), -300 mm x 2600 mm max. timber cross-section -circular saw blade D 900 mm determination of the value 8.000 € new flat motor 18.5 kW / 1450 r/min with flange 4.300 € new positioning gearmotor 1.700 € new circular saw blade AKE D 900 mm, Z 120, 10% discount 8.500 € new electrical control cabinet Ppsdscbq Nwjpfx Amket 22.500 € without steel construction and without assembly -the special saw was only used for about 5 hours after the overhaul >>Made in West Germany 100% massive steel construction with movable portal and mounted saw unit from above, circular saw motor 18.5 kW, 1450 rpm with electronic brake travel drive 2.5 kW with frequency converter, travel speed infinitely variable saw blade max. D 900 mm, cutting height max. approx. 300 mm if the saw unit is in the basic position, the circular saw blade is in a lower protective hood and completely covered. machine overhauled without additional safety devices >> The working width can also be increased by conversion

Condition: excellent (used), For panels measuring 5600 x 2600 (2700 mm), thickness from 2 mm to 60 mm N° 2 double-deck infeed roller conveyors, 1 x 6.000 mm long and 1 x approximately 3.800 mm long Hydraulic lifting table (5600 x 2700 mm ca.) System with rubber wheels (11 top + 11 bottom) for panel pressure/feeding Sliding bridge with 45 suction cups and 5 supports (for panel stack alignment) 1st Rear - Pusher, with 11 clamps Rotating table (90° panel rotation) with plastic wheels 1st Panel Saw AH8 580 - Max cutting width mm 5600 (Max blade projection mm 165) Scoring Unit (max. diameter saw / power) mm 200 ca. (Kw 2,2 ca.) Main Sawing Unit (max. diameter saw / power) mm 520 ( Kw 32) Adjustable speed of the saw carriage (m/min) 0 - 150 Sliding crosspiece with 7 pushers for cut panels With 4 supports (for panel stack alignment) and 3 motorized chains 2° Rear - pusher, with No. 25 (27) clamps/grippers 2nd Panel Saw - Max cutting width mm 2700 (Max blade projection mm 165) Scoring Unit (max. diameter saw / power) mm 200 ca. (Kw 2,2 ca.) Main Sawing Unit (max. diameter saw / power) mm 520 (Kw 32) Adjustable speed of the saw carriage (m/min) 0 - 150 Waste evacuation system with grinder VECOPLAN (Kw 55) Ppsdpfsxvc N Djx Amket Plastic wheels coated table for cut panel output Stacking system for cut panels with N° 2 front support tables with air blowing system 400 x 6300 mm + N° 8 lifting tables (4 are 1300 x 1600 mm and 4 are 1300 x 1410 mm) - Total power KVA 130

Condition: excellent (used), For panels measuring 5600 x 2600 (2700 mm), thickness from 2 mm to 60 mm N° 2 double-deck infeed roller conveyors, 1 x 6.000 mm long and 1 x approximately 3.800 mm long Hydraulic lifting table (5600 x 2700 mm ca.) System with rubber wheels (11 top + 11 bottom) for panel pressure/feeding Sliding bridge with 45 suction cups and 5 supports (for panel stack alignment) 1st Rear - Pusher, with 11 clamps Rotating table (90° panel rotation) with plastic wheels 1st Panel Saw AH8 580 - Max cutting width mm 5600 (Max blade projection mm 165) Scoring Unit (max. diameter saw / power) mm 200 ca. (Kw 2,2 ca.) Main Sawing Unit (max. diameter saw / power) mm 520 ( Kw 32) Adjustable speed of the saw carriage (m/min) 0 - 150 Sliding crosspiece with 7 pushers for cut panels With 4 supports (for panel stack alignment) and 3 motorized chains 2° Rear - pusher, with No. 25 (27) clamps/grippers 2nd Panel Saw - Max cutting width mm 2700 (Max blade projection mm 165) Scoring Unit (max. diameter saw / power) mm 200 ca. (Kw 2,2 ca.) Main Sawing Unit (max. diameter saw / power) mm 520 (Kw 32) Adjustable speed of the saw carriage (m/min) 0 - 150 Pjdjxvc Rzjpfx Amkept Waste evacuation system with grinder VECOPLAN (Kw 55) Plastic wheels coated table for cut panel output Stacking system for cut panels with N° 2 front support tables with air blowing system 400 x 6300 mm + N° 8 lifting tables (4 are 1300 x 1600 mm and 4 are 1300 x 1410 mm) - Total power KVA 130

Condition: good (used), Pallet wrapper, strapping machine, packaging machine, strapping machine, skinpack machine, stretch wrapping machine, stretch film machine, wrapping roll, roll carrier for cardboard roll -Roll carrier: winding roll for packaging machine -Roll: Ø 148 x 1600 mm -Drive shaft/mount: Dimensions see photos Ppjdpfx Aexmi H Rjmkjt -Dimensions: Ø 148 x 1870 mm -Weight: 38 kg

Condition: excellent (used), lifting height: 2,000 mm, load capacity: 2,000 kg, total length: 2,600 mm, total width: 800 mm, transport length: 2,600 mm, power: 1.5 kW (2.04 HP), roll width: 700 mm, 2 WTT Fördertechnik - hydraulic scissor lift tables with driven roller conveyor. Type: E.20.16.8.2.0.RB, Pedpfxjuyhlts Amkopt Length - 2600mm, width - 800mm roller width 700mm Load capacity 2000kg each Lifting height max 2000mm

Year of construction: 1983, condition: good (used), strip width 1.600 mm strip thickness 0,3 - 3 mm reference material (tensile strength) 420 N/mm² speed 68 m/min. at 6.000 mm plate length Ppjdpfx Amsbidg Eokot 23 m/min. at 400 mm plate length

Year of construction: 1979, condition: good (used), strip width: 600 - 1.600 mm Ppedpfx Amjgnyglsket strip thickness: 0,4 – 2 mm edge trimming width: 5 - 60 mm speed: approx. 60 m/min

Year of construction: 1979, condition: good (used), strip width: 600 - 1.600 mm strip thickness: 0,4 – 2 mm edge trimming width: 5 - 60 mm speed: approx. 60 m/min Ppjdpfx Amogrug Rsket

Condition: new, pressure: 100bending length: 2600column width: 2150daylight: 530stroke lenght (max.): 300column throat depth: 450messurements (LxWxH): 3320x2260x2780weight approx.: 79004 axes (Y1, Y2, X, R): Ja alle Achsen über die Esa S630 (2D Grafik Steuerung)CNC crowning system by control: ja über die Esa S630 (2D Grafik Steuerung)motor power: 11 Standard equipment: KK Kletzer Europe We have put together a high-quality model for Europe. The CNC press brake KK kletzer Made in Turkey. Model KKI EUROPE XL The powerful EUROPA XL press brake is characterized by its high precision, accuracy and versatility. Europa XL has a very large installation height and, as a result, a large stroke (cylinder travel). The projection is also above average in order to restrict yourself as little as possible. We rely on quality, which is also reflected in the management. As a standard control we have the high-quality Esa S640 (2D graphic control) Furthermore, the press brake KKI Europa XL is equipped with Y1, Y2, X and R CNC axes via the control. Of course, the CNC crowning control Esa S640 (2D graphic control) is also included. We don't make any compromises when it comes to the upper tool and the die either the CNC press brake KKI EUROPA XL with quality tools from EUROSTAMP Italy. Of course, every machine is only as good as the service. For this reason we set our focus on highly qualified employees with many years of experience in the CNC sheet metal processing sector. CNC axes Y1, Y2 , X and R axis Esa S640 (2D graphic control) Back gauge with double linear guide and ball screw Motorized crowning device with CNC control 2 pieces of support arms in front, heavy version, height adjustment with hand wheel, from 175 tons heavy version on linear guide Laser safety device on the upper beam CE protective equipment various options available Ppedped En Rysfx Amkst Other controls: ESA 640 2D 15'' touch screen control                                     ¤ 4,529.00 inkl. ESA 675 W 3D 21'' touch screen control (Windows Base)      ¤ 6,485.00 DELEM 66 T 2D 17'' touch screen control (Windows Base)     ¤ 10.165,00 DELEM 69 T 3D 17'' touch screen control (Windows Base)     ¤ 16.350,-- KK Industries GmbH There's something for everyone!

Condition: like new (used), Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch Mr.: Simon Blank Technical data of the pallet rack traverse: Racking system: SSI Schäfer Type: PR 600 Included in delivery: 01x pallet rack traverse, II. choice Material color: RAL 5010 gentian blue Type of truss: head truss U-profile: 70x42 mm agraffe: 5 hooks clear width: approx. 1.970 mm max. load per truss pair 600 kg, with evenly distributed load 02x safety pins, II. choice execution: compl. galvanized To secure the longitudinal beams against unintentional lifting out Further information / data: These cross beams / longitudinal bracings can be used with pallet racks as storage shelf for boxes / cartons etc. The storage of euro pallets / pallets is not permitted on these pallets is not permitted on these traverses. The maximum load per truss pair is approx. 600 kg. General information about the article: This item is offered for pickup only. A desired transport or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery with us. Our services at a glance: Ppedpfx Amjhryi Ieket (prices on request) Assembly, erection our general assembly conditions are to be observed Rack inspection Rack inspection according to DIN EN 15635 executed according to the requirements of BGR 234 visual inspection for all racking systems Delivery with our own fleet (without

Condition: excellent (used), Year of construction: 2009, Technical data: Working width: 2600 mm Ppsdpfeyg Eulox Amket Bending capacity: 16.0 mm Pre-bending: 12.0 mm NC control Upper roller diameter: 330 mm Middle roller diameter: 290 mm Side roller diameter: 270 mm Conical bending device via inclined positioning of the side rollers Mobile control panel with digital display Motor power: 11 kW CE mark Dimensions (length x width x height): approx. 5100 x 2100 x 1800 mm Weight: approx. 12 tons The seller is not liable for typographical or data transmission errors. The machine's condition, both visually and technically, as well as wear, is in accordance with its age; used machines are sold without any warranty.

Condition: excellent (used), Rubber protective mats, conveyor belt, belt conveyor belt, conveyor belt rubber, rubber conveyor belt, conveyor belt, conveyor belt -Conveyor belt: Conveyor belt conveyor belt unused -Width: 140 mm -Length: 6 m -Transport dimensions: Ø 660 x 140 mm -Weight: 5.9 kg Psdpfx Amjvu Tauokspt

Condition: excellent (used), Rubber protective mats, conveyor belt, belt conveyor belt, conveyor belt rubber, rubber conveyor belt, conveyor belt, conveyor belt -Conveyor belt: Conveyor belt, transport belt, unused Podpjvu Td Hefx Amkept -Width: 140 mm -Length: 6 m -Dimensions: Ø 240 x 145 mm -Weight: 3.2 kg

Condition: used, Roller conveyor, conveyor belt, roller conveyor belt, dust blow-off machine, roller conveyor cleaning machine -with adjustable baffle Pedpfx Ameb Ryn Uekspt -Compressed air blow-off nozzles below/above -Roll width: 950 mm -Conveying length: 4600 mm -Diameter roller: 85 mm -Center distance: 150 mm -Height: mm -driven: via gearbox -Geared motor: 0.25 kW -Speed: m/min -Dimensions: 1400/4700/H1400 mm -Weight: 600 kg

Condition: used, Rubber protective mats, conveyor belt, belt conveyor, conveyor belt rubber, rubber conveyor belt, conveyor belt, conveyor belt -Conveyor belt: conveyor belt conveyor belt -Width: 175 mm -Length: 9600 mm Pjdpjirukbjfx Amkopt -Thickness: mm -Number: 2x conveyor belt available -Price per piece -Transport dimension: Ø 125 x 175 mm -Weight: 1.8 kg/pc.

Condition: used, Conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, support rollers Pjdpfx Aerxw Hqsmkjpt -Conveyor belt rollers: transport rollers diameter 60 mm -Total length: 1600 mm -Shots: M10 -2 sprockets:Ø 62 mm, 14 Zähne -Quantity: 6x transport rollers available -Price per piece -Dimensions: Ø 60 x 1600 mm -Weight: 9,4 kg/pc.

Condition: good (used), Conveyor belt, belt conveyor belt, conveyor belt, belt conveyor, blind conveyor belt, slat conveyor belt, transfer station -Transfer station: Conveyor belt with tipping function, comes from blind production -Speed: 10 m/min -Conveyor belt width: 6050 mm -Conveyor belt length: approx. 880 mm, dimensions see technical photo. drawing -Drive/gearbox: 2x Nord, see photos of nameplates -Transport dimensions: 6050/910/H960 mm Ppedpfx Amsptf H Dskst -Weight: 520 kg

Condition: good (used), Tubular heater, heating tape, heating sleeve, mica heater, cylinder heater, heating cylinder, ceramic heating tape -Manufacturer: Erge, heating tape, heating sleeve -Type: Ø125 x 95 mm -Item No.: 827 565 65 -Heating power: 1600 W -Voltage: 220 V -Dimensions: 190/150/H95 mm -Weight: 1.1 kg Ppjdpelu N Elefx Amkst

Condition: used, Roller conveyor, conveyor belt, roller conveyor belt, roller conveyor -Roll width: 900 mm -Conveying length: 3600 mm -Diameter roller: 50 mm -Center distance: 100 mm -Height: 655 mm -driven: via chain -Geared motor: kW no nameplate -Speed: 14 m/min Psdpfxscii Nxe Amkjpt -Dimensions: 3600/1000/H655 mm -Weight: 200 kg

Condition: like new (used), Year of construction: 2025, functionality: limited functionality, spindle motor power: 60 W, turning length: 9,000 mm, turning diameter over cross slide: 1,400 mm, spindle speed (max.): 160 rpm, turning diameter: 1,600 mm, overall weight: 35,500 kg, rotational speed (max.): 160 rpm, rotational speed (min.): 1 rpm, total width: 2,000 mm, total length: 12,000 mm, working length: 10,000 mm, workpiece weight (max.): 16,000 kg, turning diameter over bed slide: 1,600 mm, power: 60 kW (81.58 HP), warranty duration: 12 months, Machine in like-new condition with CNC, undergoing retrofit. Built originally in 1990, has few working hours due to the factory closure. Fully modernized equipment: electric, electronic, hydraulic, cable, portable chains; new CNC(2025 Edition). Mechanically in like-new condition, fully inspectable. Partially dismantled due to space constraints, partially in operation until installation is completed. Can be inspected at any time, suitable for heavy industrial use. For more technical details, please send request. Price: quote on request. Delivery/installation: transportation options and installation quote available at request. Testing on delivery: available Warranty: 1 year mechanical, electric, hydraulic, 2 year CNC equipment. Ppsdpoygk I Dofx Amkot

Condition: good (used), functionality: fully functional, grinding length: 600 mm, grinding width: 250 mm, Minini (Italian) Horizontal Spindle Surface Grinder Ppedsxxywkjpfx Amket Capacity: 600 x 250mm With Magnetic Chuck

Year of construction: 2020, condition: new, The Sapphire is the optimum solution for heavy industry for material thicknesses up to 200 mm. It enjoys great popularity with various production companies - often in three-shift operations - and all areas of application where stability, efficiency and process reliability are particularly important. Thanks to the high-quality equipment, the system is a universal tool for the highest demands and a helpful instrument for process optimization. Used in more than 400 industrial plants worldwide, the Sapphire cutting system proves itself every day. Equipment - Harris oxy-fuel burner - Kjellberg plasma torch with e-touch - Kjellberg Q 3000 plasma power source with automatic gas console - Crosshair laser pointer for easier positioning - CamConcept Finest Cut V 7 - Suction table 3000 x 6000 mm - Suction unit PFC 6 incl. suction pipes - Delivery, installation and commissioning Main features - High dynamics and precision in automated 2D & 3D cutting of sheets, tubes and profiles - Sheet metal processing up to a material thickness of 200mm - Extensive cutting database for ideal user-friendliness - Designed for highest demands under the most difficult conditions in three-shift operation General technical data Drive: Servo AC Available working widths: 2.000-7.000 mm Available working lengths: from 1.500 mm positioning speed: 25,000 mm/min cutting thickness: up to 200 mm Pedpfef Ak N Rjx Amkopt Cutting quality: DIN-EN ISO 9013 Positioning accuracy

Condition: good (used), Cast iron bed - Floor Plate Ppedpeh Auahjfx Amkot Useful surface (L x W x H): 3600 x 1200 x 300 mm 4 T-slots: width 44 x 26 mm Equipped with Levelling feet Weight: approx 3 T

Condition: used, Cast iron bed 2600 x 2000 x 350 mm Length: 2600 mm Width: 2000 mm Thickness: 350 mm 8 T-slots T-slots dimensions: 55 x 35 mm Slots spacing: 250 mm Equipped with 12 leveling feet Weight: approx 4,5 T Psdpewlhd Uefx Amkjpt

Condition: used, Cast iron bed 2600 x 2000 x 350 mm Length: 2600 mm Width: 2000 mm Thickness: 350 mm 8 T-slots T-slots dimensions: 55 x 35 mm Pedpswlhflsfx Amkspt Slots spacing: 250 mm Equipped with 12 leveling feet Weight: approx 4,5 T