Used Heraeus Furnace for sale (802)

Year of construction: 2025, condition: new, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 Gedofzccnspfx Ab Deit 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Year of construction: 2025, condition: new, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Godpefx Nfmjfx Ab Deit Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Condition: used, Year of construction: 2011, functionality: unexamined, total length: 1,700 mm, total height: 1,400 mm, total width: 680 mm, overall weight: 400 kg, Centrotherm VLO 20-N2-HCOOH Vacuum Furnace/Process System Thermal process system with nitrogen and formic acid supply, including Leybold vacuum pump and control system. Year of manufacture: 2011. Well-maintained exterior condition, but without documentation and no available password – therefore only partially tested. Gjdpfxoyubphj Ab Doit Power: 10 kW; Load current: 25 A; Supply: 3/N~ 400/230 V 50 Hz; Breaking capacity: 0.3 kA; Operating hours: approx. 21,286 h

Year of construction: 2013, condition: ready for operation (used), functionality: fully functional, - Compact tabletop model with user-friendly, parallel upward-opening door - Double-walled housing with blower cooling, low external surface temperature Gisdpeytr Ekjfx Ab Det - Furnace insulation made of low thermal mass alumina material, allowing for rapid heating and cooling - High-quality heating elements made from molybdenum disilicide (MoSi2) - Low power requirements - Heating elements controlled via thyristors, ensuring extremely precise furnace control; wear-free and silent operation - High temperature accuracy inside the furnace chamber - Exhaust vent in the furnace ceiling Incl. PC: HP Compaq dx2300 Microtower Dx2300M/E2160/160hnd/1024L/4rf, Dual Core with Microsoft XP + DVD drive + 19" Philips monitor Model ID: 190B4CS/00 (Company: Bechtle, Heilbronn 26.09.2003 net €528 Inventory No. 5633) with Eurotherms iTools with Wizards pre-installed and on DVD, all necessary cables, keyboard, Logitech wireless mouse

Condition: ready for operation (used), Year of construction: 2001, total width: 1,500 mm, total length: 3,000 mm, Glass tempering furnace 4-19 mm, loading 1.5 x 3 m, without convection, furnace is connected, machine is operational but requires improvements, on-site testing possible. Gsdpfxex Dy Sfj Ab Djit

Condition: used, heating: electrical useable space: ø400 x 400 mm temperature: max. 1.300°C ventilation: exhaust fan during the cooling phase and activated cooling fan ultimate vacuum: 10 mbar exhaustion time: ca. 5 min nitrogen: inlet pressure min. 3 bar Gijdpjv Sbc Eofx Ab Dot oxygen: inlet pressure min. 3 bar

Condition: refurbished (used), Roller hearth furnace, make Mahler type: RHEE 500/100/3000-6500 refurbished: 2016 max. charge weight: 40 kg/m nominal throughput: 288 kg/h clear roll width: 500 mm clear height above roll: 100 mm furnace length: approx. 22100 mm working temperature: - Warm-up zone: 800-1000°C - High temperature zone 800-1250°C Gisdpfx Aofc Hbdob Djt heating: electric connected load: 400 kW gases used: nitrogen, hydrogen

Year of construction: 2000, condition: repair required (used), We are offering this SAFED conveyor belt furnace in need of repair, year of manufacture 2000. Numerous spare parts are included. Manufacturer: Safed Model: 1 used continuous furnace Year of manufacture: 2000 Operating temperature (hardening furnace): 870-930°C Gas power: 240 kW A Max. gross batch weight: 400 kg/h Max. batch width: 600 mm Quenching type: oil Gjdpfxjyr Atps Ab Dsit Tempering furnace: Gas power: 215 kW Operating temperature: 170-650°C Max. batch weight: 400 kg/h Washing machine: Max. batch weight: 400 kg/h The system is still operational until the end of March 2026. Several spare parts are also included. Original purchase value approx. €85,000. All prices are ex works Kehl; disassembly and all subsequent costs are the responsibility of the buyer. VAT is not included in the prices. Subject to prior sale and errors. Used equipment is sold without any warranty or guarantee. We cannot be held liable for personal injury or property damage during disassembly by the buyer. Place of jurisdiction is Germany. All agreements are made under German law. The material remains the property of the seller until full payment has been received. If you have any questions or require further information, please feel free to write us a message or give us a call.

Condition: excellent (used), Year of construction: 2021, temperature: 1,000 °C, energy consumption: 10 kWh, Laboratory furnace / Glass tempering furnace Max temperature: 1000°C Giedpfx Abjxcb Hns Dot

Year of construction: 1985, condition: used, For sale Batch annealing furnace – completely customs refurbished in 2010. With 2 furnace lids made of stainless steel – new ( 2020 and 2025). Original manufacturer : LEE WILSON ENGINEERING Company. CLEVELAND OHIO Gsdpfx Aoyqyf Hsb Deit 3m diameter x 3 m height size of charge Protection Gas: HNX (Nitrogen-Hydrogen) -Pression in cover :8 mbar. Fan rotation:750r/min. Cooling: Air jet cooler (Max 60°c/hour depending on the charge) The atmosphere can be changed, currently at 95/5% H N. If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: new, 7 pieces heating coil new for a melting furnace Fulmina SOU 20E, Technical data: Reversible element with connection ends Ø 10 x 270 mm power: 10.000 Watt Voltage: 220 Volt cold resistance: 4,60 (± 5%) Ohm wire diameter: 4,50 mm coil inner Ø: 29 mm leg length: 240 mm Number of legs: 3 x 8 pieces Wire quality: CrFeAl Y 3 heating coils are a complete set in this model (the pictures of the melting furnace serve the representation and show the model in which the heating coils were installed, they fit however also into other models with smaller or higher achievement, it changes only the number of pieces) immediately available from stock Godpfsd Tx A Esx Ab Djit

Year of construction: 2012, condition: used, Technical details: Gisdpfx Abeu R Dhxo Dot max. temperature: 700° - übliche Temperatur: 400 - 650°C Grad size of opening: B: ca. 2200 x T: ca. 3800 x H: ca.1100 mm program control: Siemens S7/300 IM 151-7 interface: Ethernet container volume: Ofen-Volumen: 9,2 m³ l control voltage: 24 / 230 Volt current type: 1P/PEN; 50 Hz Voltage: 400 V elect. connected power requirement of heater: 3 x 3 x 21 kW = 189 kW flow rate: 3 x ca. 9.000 = 27.000 m³/h weight of the machine ca.: 8,0 t dimensions of the machine approx. HxWxD: ca. 3.9 x 3.8x 4.8 m dimensions electric cabinet: ca. B: 2.400 x T: 400 x H: 2.000 mm transport dimensions LxWxH: ca. 5,2 x 3,6 x 2,9 m Electrically heated circulation oven Electric annealing furnace whose housing is made of profiled sheet steel and lined with lightweight refractory bricks/ firebricks. Application/processes: mainly annealing of low-alloy and high-alloy wood cylinders (e.g. alloyed gray cast iron) Usual operating weight 5000kg max. 8000kg The parts are placed directly crosswise on the bogie hearth/grate in the flow device. (Height above floor approx. 750mm without grate) Heating integrated in oven ceiling Circulation fan (3 compact fans) on oven side wall, 3 x 4.0 kW = 12.0 kW Forced cooling (1 cooling air fan) Program control via 25 programs with 50 program sections per program Oven door/lifting door with SWE gear motor approx. 2.2 kW (frequency-controlled) Bogie hearth drive approx. 3.0 kW SEW geared motor (frequency-controlled) incl. center rail (chain drag) used, good condition *

Condition: good (used), Make: ELIOG Year of manufacture: 1992 Godpfjym U Sgjx Ab Dsit Opening (W x H x D): 150 x 110 x 350 mm Temperature: up to 1,350 °C Nominal power: 4 kW Connection load: 5 kW Accessories/Equipment: separate control cabinet Condition: good Total weight: 170 kg Furnace dimensions: 500 x 600 x 430 mm Control cabinet dimensions: 450 x 550 x 700 mm

Condition: excellent (used), Year of construction: 2001, Vacuum tempering furnace Manufacturer: BMI year of construction 2001 Maximum temperature: 750°C Year of construction: 2001 Batch size: L X W X 1200 X 600 X 600mm Heating: Electric Heating capacity 100 KW Giedpfjvcyf Tsx Ab Dot

Year of construction: 2005, condition: ready for operation (used), Industrial drying oven / heating oven: Maximum operating temperature: 160°C, power: 20.6kW, double-door model, recirculating air / fresh air system, digital PID temperature controller, digital timer / process control, digital recording device / chart recorder (TE Direct), internal dimensions (W x H x D): approx. 1000mm x 1500mm x 800mm (approx. 1200l volume), external dimensions (W x H x D): approx. 1600mm x 2100mm x 1200mm, total weight: 580kg. Inspection possible by arrangement. Gjdpfx Aeylzg Iob Deit

Year of construction: 2025, condition: new, functionality: fully functional, Equipment: CE marking, Bogie hearth furnace / kiln / oven for heat treatments on steel (normalizing, annealing, tempering, preheating, etc.) made by Pagnotta Termomeccanica srl, Deruta, Italy Model FFEC/TT Maximum temperature: 800°C Usable load dimensions: 1,300 x 1,000 x 1,300 mm (H) CE certification 12-month warranty New machine, built in Italy Gedjwd Haljpfx Ab Deit The specifications and attached photos are purely indicative. Customized machines are available, specifically for each heat treatment process.

Condition: new, # suitable for treatment under inert gas # with rapid cooling by fan external dimensions (w x h x d): 1500 x 1600 x 2500 mm useable dimensions (w x h x d): 750 x 600 x 1100 mm temperature: 1200°C Gedpfjcdi R Eox Ab Deit electrical heated: approx.. 42 kW charge weight: 700 kg

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, total length: 23,000 mm, type of input current: AC, number of chambers: 1, Equipment: documentation/manual, Glass tempering furnace TAMGLASS / GLASTON, HTF-2442-CTA-10-L Gsdeylaqlopfx Ab Dsit 2400 x 4200 mm, Left – Right Year: 1999. With convection (Low-E glass) Noise reduction cabin included. 400 V, 50 Hz, total power: 1160 kW (heating 630 kW, motors 530 kW) In good technical condition. Inspection during production is possible by appointment. Available: SEPTEMBER 2026

Condition: excellent (used), Carbolite CWF 11/5 Chamber Furnace 1100 °C Gedpopygpfjfx Ab Doit Max Temp: 1100 °C With exhaust system and table Upward opening door keeps hot surface away from user Soft self-closing door (for 5, 13, 21 & 23 liter models) Standard start delay and process timer function Durable aluminum oxide support plates for the heating elements; sturdy door surround and base plate High quality fiber insulation with low thermal mass Powerful heating elements on both sides provide very good temperature homogeneity Easy access to elements and controls simplify maintenance and servicing Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles new and used - you will find in our store! International shipping costs on request!

Condition: good (used), Glasbeek Finish Gas Chamber Furnace Type 003.05 Glasbeek finish Gas chamber furnace Type 003.05 With loading trolley Maximum temperature 200 ° C Giedod Spx Dspfx Ab Dst Approximate inside dimensions (B1900mm x T2950mm x H1800mm) Financing through our bank is also possible. komplett-konzept.leasingo.de More articles - new and used - can be found in our shop! International shipping costs on request!

Condition: good (used), Year of construction: 1992, Glasbeek Finish Gas Chamber Furnace Type G.11.01, 250 ° C Glasbeek finish Gas chamber furnace Type G.11.01 Maximum temperature 250 ° C Approximate inside dimensions (B1400mm x D1900mm x H1985mm) 6m³ Bogie dimensions approx. (1000 mm x 1800 mm x H250 mm) Year 1992 Gisdjd Srlrspfx Ab Det 3 x 380 volts 41 kW Financing through our bank is also possible. komplett-konzept.leasingo.de More articles - new and used - can be found in our shop! International shipping costs on request!

Condition: good (used), Year of construction: 2015, Laboratory furnace for bending tests, 120 kW kiln, 900 °C chamber furnace 2 bending chambers Adjustable ceiling height Temperature range: max. approx. 900 °C Auxiliary heating Control cabinet PC, HP, Intel Core 2 Duo Voltage: 400 V Power: 120 kW Year of manufacture: 2015 Pre-chamber Width: 900 mm Height: 300 mm Gjdpfxoxurpwe Ab Djit Depth: 580 mm Bending chamber Width: 520 mm Height: 115 mm Depth: 550 mm Financing through our bank is also possible. komplett-konzept.leasingo.de Further items – new and used – can be found in our shop! International shipping costs on request!

Condition: excellent (used), Sat B2599A Drawer oven 130 °C If very different products or product parts with equally different annealing times are to be treated independently of each other in the smallest possible space, drawer ovens are the smartest ergonomic solution. Oven data Manufacturer: Sat Model: B 2599 A Type: 1000T Type: Drawer oven Outer dimensions of the furnace width with control cabinet: 2500 mm depth: 1700 mm Height: 2250 mm Usable volume in each drawer width: 1200 mm depth: 850 mm Height: 170 mm (measured 178 mm) Maximum working temperature: 130 °C Temperature homogeneity in the usable volume, when stabilized : +/-3°C at 80°C Frame : The basic structure consists of a non-alloyed steel beam structure, on which the external lighting made of non-alloyed steel is painted in RAL 1013 (pearl white). The furnace inner casing is made of aluminized steel sheet. Insulation between the two furnace housings (inner/outer housing) is provided by 120 mm rock wool. Floor: Same as the furnace walls, with 120 mm thick thermal insulation. Height (from factory floor to I. drawer): 800 mm +/100 mm adjustable by the furnace feet. Openings: 3 drawers, height 250 mm, for a usable load of 120 mm height. Maintenance doors : 2-leaf maintenance door on the back of the oven. Gsdpfx Abeim Ik Sj Doit Secured by screws. This door allows complete access to the inside of the furnace. Parts handling: The handling of the parts is ensured by 3 drawers (one above the other). Height between each drawer : 250 mm Usable height per drawer : 170 mm, with almost 10 mm reserve. The drawers are smooth and equipped with a locking piece at the bottom of the drawer to reduce heat loss when opening. Each drawer has a useful load capacity of 120 Kg with load distribution over the entire surface. Load peaks up to 240 Kg can be supported. The drawer seals are made of silicone. The locks of each drawer are ensured by electromagnets and controlled by the Siemens system. Timing of the minimum preheating time with a timer per drawer (located in the electrical cabinet). Timing of the maximum preheating time with one timer per drawer (located in the electrical cabinet). One temperature indicator is provided per drawer. These indicators will be located on the front of the furnace, to the left of the drawers. Financing through our bank is also possible. komplett-konzept.leasingo.de More industrial furnaces in other sizes - new and used - you can find in our store! International shipping costs on request!

Year of construction: 2008, condition: ready for operation (used), Loading chamber dimensions: 280x580mm, loading height: 700mm, max. load: 300kg, with protective housing and documentation, machine was functional until the end, complete maintenance would have to be carried out on the machine, inspection is possible. Gjdpfx Absqgfbgj Doit

Year of construction: 2010, condition: ready for operation (used), Heated surface: 1600x2600/ 2000x2000mm, nominal power: 120kW, length: 2600mm, width: 2300mm, with control cabinet and conveyor. Godpoifpuaefx Ab Dsit