Used Hauser-Sip Mp-52 for sale (7,687)

Condition: used, functionality: fully functional, color channels: 2 kleuren rechtdoor, paper weight (min.): 30 g/m², paper weight (max.): 350 g/m², paper width (min.): 148 mm, paper width (max.): 520 mm, paper height (min.): 100 mm, paper height (max.): 365 mm, total length: 2,765 mm, total width: 1,523 mm, total height: 1,560 mm, space requirement length: 2,765 mm, space requirement width: 1,523 mm, space requirement height: 1,560 mm, type of input current: three-phase, input current: 20 A, input voltage: 200 V, Equipment: documentation/manual, 2-colour offset press in high-quality construction with hardened and ground gears, cylinders run in class P5 pre-stressed conical roller bearings (sets of 2) and lubricated in oil bath and pressure lubrication. B3 format (35x50 cm) in conventional standard design (no autoplate and/or cocking) but alcohol film dampening with large rollers according to SM52 construction, prints very nicely Originating from 1st owner who did not maintain the machine properly (visually); an extensive maintenance history has been carried out by the importer. The last counter reading in the history is 11.6 Mln from 2003. Due to illness and outsourcing, the previous owner, a printing broker, has hardly used the machine since then. We will check the machine on the current counter reading and ensure correct and proper operation. C)2 dry ice cleaning is still being considered as well as overhauling the entire machine, because the mechanical condition is exceptionally good. This is however cost increasing so the machine is now offered for the cheapest option, that is "as it is", EXW our warehouse in Son, NL. Any type of inspection is of course allowed. We guarantee the machine as free from breakage, cylinder damage and/or repair and damage free to gears. The rubber rollers are vitrified and need to be replaced. The Royce ECO circulation and cooling installation for the dampening work shows signs of corrosion. Some specs, for all specs open the PDF at the bottom of this page. Isdpfx Aov Nv Taea Eoti Maximum printing speed 12,000 sheets per hour Maximum paper size 365 x 520 mm Minimum paper size 100 x 148 mm or 148 x 100 mm Maximum printing surface 350 x 510 mm Rubber cloth size 500 x 520 x 1.9 mm Plate size 400 - 410 x 510 mm Dampening rollers in this case of film dampening is 1 (62mm) Number of ink feed rollers 4 pieces of 46, 48, 52 and 54 mm Inlay stack height maximum 850 mm Explanation stack height max 360 mm Electrical connection 3 phases 200 VAC 50HZ (primary) but there is a transformer for conversion from 3 x 415/400/380/230 VAC to 200VAC Power consumption in total 7kW Primary fuse in any case 20A Dimensions LxWxH = 2765 x 1523 x 1560 mm Net weight 4000 kg

Condition: excellent (used), Year of construction: 2007, load capacity: 200 kg, arm reach: 2,400 mm, controller manufacturer: KUKA, controller model: KRC2 ED05, Compact, extremely fast and with a unique combination of payload and reach: these attributes make KUKA comp series robots are the obvious choice for a wide range of applications – e.g. handling or spot welding. Model: KR200 COMP Payload: 200 kg Reach in mm : 2400 mm Condition: Used & Tested Year: 2007 (Multiple options available) Iodpfx Aaow H A A Ie Ejti Included: Manipulator + KRC2 ed05 Cabinet + Teachpendant + All Wire Sets Shipment expenses are not included in the price Please get in touch with us for a quote and also the refurbishment options. As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with KUKA, ABB, FANUC and Motoman brands.We also offer custom engineering services and design for your specific production needs. (Source: Kuka's Website)

Condition: used, Indexing table Sip Clamping surface diameter 300 mm 8 T-slots, 12 mm wide Swiveling range 0 - 90 degrees Length 800 mm Width 600 mm Height 300 mm Ijdpfx Aascv S Nvs Eoti Weight 120 kg

Condition: used, Year of construction: 1968, Technical details: x-travel: 400 mm y-travel: 250 mm workpiece height: 500 mm grinding diameter: 220 mm table surface area: 600 x 320 mm throat: 310 mm range of angles: 12 ° grinding wheel stroke - vertical: 110 mm stroke speeds: 0 - 6 m/min grinding spindle speed: bis 50000 U/min peripheral speed: max. 35 m/sec capacity: ca. 7 kVA power capacity: 6 kW weight of the machine ca.: 2 t dimensions of the machine ca.: 3 x 3 x 3 m rotary table d = 300 mm frequency changer * Isdpfx Aasvbzwze Esti

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: 30547, spindle speed (max.): 160,000 rpm, table width: 350 mm, table length: 700 mm, overall weight: 3,000 kg, No reserve price – guaranteed sale to the highest bidder! The payment deadline for the machine is 20/11/2025! By placing a bid, you commit to timely collection between 01/12/2025 and 05/12/2025! TECHNICAL DETAILS Spindle speed Turbine T10: 75 / 100,000 rpm Spindle speed Turbine T16: 120,000 – 160,000 rpm Table dimensions: approx. 700 x 350 mm MACHINE DETAILS Electrical Data Operating voltage: 3 x 380 V Frequency: 50 Hz Control voltage: 110 V Connection: 6 kW Iodpexnl Imjfx Aa Esti Dimensions & Weight Dimensions (L x W x H): 3,500 x 2,000 x 2,900 mm Weight: 3,000 kg EQUIPMENT 3 different high-frequency grinding heads (various speeds) Two-axis digital display by VISULESTA With 4 T-slots

Condition: not inspected (used), functionality: unexamined, travel distance X-axis: 650 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 140 mm, spindle speed (max.): 80,000 rpm, table load: 500 kg, No reserve price – guaranteed sale to the highest bidder! The machine is being auctioned as part of a business liquidation. Placing a bid obligates the buyer to collect the item promptly between 26/01/2026 and 29/01/2026! TECHNICAL DETAILS Travel Travel X-axis: 650 mm Travel Y-axis: 450 mm Travel Z-axis: 140 mm Travel W-axis: 500 mm Travel U-axis: 6/20 mm Work Table Table dimensions: 770 x 630 mm Table load: max. 500 kg Spindle speeds: from 9,000 to 80,000 rpm Feed rates X- and Y-axis: 0 – 3,000 mm/min Feed rate W-axis: approx. 800 mm/min Feed rate Z-axis: from 15 to 6,000 mm/min Clearance between uprights: 750 mm Clearance from table to spindle: 600 mm Main spindle diameter: 100 mm Taper grinding: max. 16° Digital readout X-/Y-axis: 0.001 mm Positioning accuracy at 20°: 0.004 mm MACHINE DETAILS Itedoxqcuvspfx Aa Esi Electrical Data Operating voltage: 3 x 380 V Frequency: 50 Hz Control voltage: 110 V Power: 7 kW Dimensions & Weight Dimensions (L x W x H): 5,000 x 2,000 x 3,300 mm Weight: 7,000 kg EQUIPMENT Tool holders E 19 and F 6 Including matching workshop cabinet with contents Contents include various grinding abrasives High-frequency grinding heads Clamping devices Extraction system Büche ENF 4000

Condition: not inspected (used), Year of construction: 1987, functionality: unexamined, machine/vehicle number: 2023, travel distance X-axis: 900 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 180 mm, spindle speed (max.): 160,000 rpm, table load: 800 kg, No minimum price – guaranteed sale to the highest bidder! Itjdpfx Aaex Rw E Ss Eji The machine is being auctioned due to a business closure. Bidding obligates the successful bidder to collect the machine within the specified timeframe from 26.01.2026 to 29.01.2026! TECHNICAL DETAILS Travel X-axis travel: 900 mm Y-axis travel: 600 mm W-axis travel: 635 mm Z-axis travel: 180 mm U-axis travel: 6/20 mm Distance between columns: 950 mm Clearance table to spindle: 735 mm Main spindle diameter: 100 mm Tool holder: E 23 E 19 EF 6 Work Table Table dimensions: 1,020 x 860 mm T-slot width: 14 mm T-slot spacing: 100 mm Table load capacity: max. 800 kg Taper grinding: max. 16° Digital readout X/Y: 0.001 mm Basic deviation X/Y at 20°: 0.004 mm Spindle speed: from 4,500 to 160,000 rpm Planetary movement (Z-axis): 5 to 250 C-axis NC drive: 0 – 5 Feed X and Y-axis feed: 0 to 1,500/3,000 mm/min W-axis feed: 800 mm/min Z-axis feed: 0.5 – 12,000 mm/min MACHINE DETAILS Control: CNC 311 Electrical Data Operating voltage: 3 x 380 V Frequency: 50 Hz Control voltage: 110 V Connection rating: 8.5 kW Dimensions & Weight Dimensions (L x W x H): 5,000 x 2,000 x 3,300 mm Weight: 7,000 kg EQUIPMENT Matching workshop cabinet with contents Various grinding tools Clamping devices High-frequency grinding head BÜCHE ENF 4000 extraction unit

Condition: not inspected (used), Year of construction: 1987, functionality: unexamined, machine/vehicle number: 2023, travel distance X-axis: 900 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 180 mm, spindle speed (max.): 160,000 rpm, table load: 800 kg, No minimum price – guaranteed sale to the highest bidder! The machine is being auctioned due to a business closure. Bidding obligates the successful bidder to collect the machine within the specified timeframe from 26.01.2026 to 29.01.2026! TECHNICAL DETAILS Itjdexqfk Tjpfx Aa Eoi Travel X-axis travel: 900 mm Y-axis travel: 600 mm W-axis travel: 635 mm Z-axis travel: 180 mm U-axis travel: 6/20 mm Distance between columns: 950 mm Clearance table to spindle: 735 mm Main spindle diameter: 100 mm Tool holder: E 23 E 19 EF 6 Work Table Table dimensions: 1,020 x 860 mm T-slot width: 14 mm T-slot spacing: 100 mm Table load capacity: max. 800 kg Taper grinding: max. 16° Digital readout X/Y: 0.001 mm Basic deviation X/Y at 20°: 0.004 mm Spindle speed: from 4,500 to 160,000 rpm Planetary movement (Z-axis): 5 to 250 C-axis NC drive: 0 – 5 Feed X and Y-axis feed: 0 to 1,500/3,000 mm/min W-axis feed: 800 mm/min Z-axis feed: 0.5 – 12,000 mm/min MACHINE DETAILS Control: CNC 311 Electrical Data Operating voltage: 3 x 380 V Frequency: 50 Hz Control voltage: 110 V Connection rating: 8.5 kW Dimensions & Weight Dimensions (L x W x H): 5,000 x 2,000 x 3,300 mm Weight: 7,000 kg EQUIPMENT Matching workshop cabinet with contents Various grinding tools Clamping devices High-frequency grinding head BÜCHE ENF 4000 extraction unit

Condition: not inspected (used), Year of construction: 1984, functionality: unexamined, machine/vehicle number: 0175, travel distance X-axis: 650 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 140 mm, spindle speed (max.): 80,000 rpm, table load: 500 kg, No reserve price – guaranteed sale to the highest bidder! The machine is being auctioned due to a business closure. By placing a bid, you commit to timely collection between 26.01.2026 and 29.01.2026! TECHNICAL DETAILS Travel Distances Travel X-axis: 650 mm Travel Y-axis: 450 mm Travel Z-axis: 140 mm Travel W-axis: 500 mm Travel U-axis: 6/20 mm Clearance between columns: 750 mm Clearance from table to spindle: 600 mm Main spindle diameter: 100 mm Itjdpfx Aaexqd Hts Eoi Work Table Table dimensions: 770 x 630 mm Table load capacity: max. 500 kg Taper grinding: max. 16° Digital readout X/Y-axis: 0.001 mm Positioning accuracy at 20°: 0.004 mm Spindle speed: from 9,000 to 80,000 rpm Feed Feed rates X and Y-axis: 0 – 3,000 mm/min Feed rate W-axis: approx. 800 mm/min Feed rate Z-axis: from 15 to 6,000 mm/min MACHINE DETAILS Control: HAUSER Electrical Data Operating voltage: 3 x 380 V Frequency: 50 Hz Control voltage: 110 V Connection: 8 kW Dimensions & Weight Dimensions (L x W x H): 5,000 x 2,000 x 3,300 mm Weight: 7,000 kg EQUIPMENT Matching workshop cabinet with contents Various abrasives Selection of high-frequency grinding heads Büche ENF 4000 extraction unit

Year of construction: 1999, condition: good (used), IMA Compact MFA / F / 5212 edge banding machine Year of manufacture: 1999 Serial number: 06601 Max. edge banding thickness: 12 mm Min. workpiece thickness: 10 mm Max. thickness of edging material roll: 3 mm Feed speed: 12 m/min Adjustment of the joint guide rail: manual Heating time: 10 min Jointing unit: Yes, with 2 milling units Automatic edging roll magazine: Yes Trimming shears up to: 0.2 - 3.0 mm Solid edge magazine: Yes Preheating of the panel by heating radiator Automatic glue application with glue tank and granulate Cutting saw angle adjustment via program Multi-function unit Rounding unit/corner copying, 2 motors Profile trimming blade Flat trimming blade Buffing unit Unit display, mechanical digital display Control type via control panel Operation: selector switch/push buttons Protective hood Weight approx. 2500 kg Dimensions L x W x H: 6500 x 1000 x 1600 mm Isdpfeia Naqjx Aa Eeti CE marked Technical specifications subject to change

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 7/61, Manufacturing origin Swiss Voltage 380/50/3 Netweight abt. 760 kg Dimensions abt. 1250x1000x1700 mm TECHNICAL DATA WORK CAPACITY Travel X and Y 200x200 mm Vertical slide travel 250 mm Travel of drilling spindle 70 mm Max free passage between table and spindle nose 330 mm Free passage between column and centre of spindle 260 mm Max drilling capacity (steel) 10 mm Max reaming capacity 50 mm TABLE Usable surface 400x300 mm Admitted load 100 kg Travels X and Y through motors Number of T-slots 6 (longitudinal) DRILLING HEAD Spindel morse taper 0 Itjdpfod Amgkjx Aa Eei Speed of spindle 150-3000 rpm Feed of drilling spindle 0,015 mm/t PRECISION Direct reading on divided drums 0,01 mm Direct reading on verniers 0,001 mm Guaranteed precision on displacement of slide-way 0,002 mm MEASURE Measuring system direct, optical Elements of measure graduated rule, div.1mm Read-out projection screens Shifting of zero-point yes Direct read-out 0,001 mm Guaranteed positioning precision 0,002 mm Installed power 1,2 kW errors and omissions excepted data given without obligation Inventory Nr.2160006, machine equipped with : 1 turning table Ø 220 with optical measure 1 centering microscope with 3-points suspension, zoom 40x, lightening 1 centering device with dial comparator cap. 3 mm. MT0 1 centering point MT0 1 tracing tool with spring-mounted point MT0 1 center punch MT0 1 chuck for centering drills MT0 1 self clamping drill-chuck 0-5 mm., MT0 1 boring head type 0, cap. 0.5-30 mm., MT0 1 levelling foot with 2 round levelling supports

Condition: new, Year of construction: 2026, The screw compressor of the Polish brand CORMAK, the THEOR H1520 COMPACT series, with an integrated dryer is the most modern solutions used in pneumatics in combination with the use of high-quality materials and components. Low operating costs, ease of use, ergonomic and solid construction as well as high efficiency of the device guarantee effective and trouble-free operation. Key benefits: strong, compact design of a screw compressor from a European manufacturer automation based on modern and quality-tested components to ensure safe and effective work a specially designed cooler ensures optimal working conditions even when the device is heavily loaded Ijdpfx Aaemrmx Te Eeti connection of the radiator with the module through good quality hydraulic hoses the technology used allows for significant energy savings special air outlet design for more efficient work a powerful and robust pump is installed in the compressor unique filtration system with triple separation for effective work the compressor uses a reliable and reliable solution, which is a direct drive transmission system between the engine and the screw mechanism (via the so-called claw clutch), which ensures: high effective efficiency; more effective leveling of vibrations low noise of the screw compressor thanks to a specially designed soundproof housing (sound insulation boards) electronic control from the MAM series allows you to set parameters, including: intervals between service inspections, power failure alarms, phase direction changes, phase loss, overheating. Possibility to buy additional cylinders. Technical parameters: Compressor Engine power 15kW Dimensions 1550x750x1200mm Weight 500kg Exhaust thread G 3/4" General parameters Capacity at 0-6 bar 1350L/min Capacity at 6 bar 1350L/min Capacity at 8 bar 1250L/min Capacity at 10 bar 1250L/min Capacity at 12 bar 1150L/min Capacity at 14 bar 1150L/min Capacity at 16 bar 1050L/min Capacity at 18 bar 930L/min Capacity at 20 bar 930L/min The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: new, Characteristic Itedpfx Aash Rumbs Esi Cable probe for hydrostatic level measurement, with ceramic cell Diameter = 22mm: General applications, Drinking water Diameter = 42mm: Wastewater applications Diameter = 29mm: Salt water applications

Condition: reconditioned (used), Year of construction: 1998, operating hours: 44,675 h, functionality: fully functional, travel distance X-axis: 650 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 140 mm, spindle speed (max.): 60,000 rpm, spindle speed (min.): 9,000 rpm, workpiece weight (max.): 800 kg, table width: 860 mm, table load: 1,500 kg, travel distance W-axis: 635 mm, Equipment: documentation/manual, Fully overhauled and in perfect condition as per original specifications and accuracy. 6 Axis X-Y-Z-C-U 7th axis CNC-rotary table with tailstock in option Control: Fanuc 15 MB Grinding Spindle 60S speed 9,000 to 60,000 rpm Hi-Cut system with full enclosure CBN Form rotary dressing with Fischer spindle and Dr. Kaiser diamond wheel This machine is under power and can be seen in our facility in Gals, Switzerland Garantee of 6 months Itedpfxswb Db Us Aa Eei Shipment, installation and training can be provided

Condition: new, Year of construction: 2024, Endress+Hauser level meter FTM50 new Level switch for fine-grained or powdery bulk solids. Process connections: Threaded, flanged and hygienic process connections (Tri-Clamp) Temperature: -50 to +280 °C Itjdpfx Aor E Uf Soa Eei Pressure: -1 to +25 bar Sensor length: 145 mm, 200 mm Sensor material: 316L (3.2 µm, 0.8 µm, PTFE coated, ETFE coated) International explosion protection certificates 4 pieces available

Condition: new, *IMMEDIATELY AVAILABLE* Act now! We're clearing out our new location! There are unique exhibition pieces available at absolute rock-bottom prices! Steel sheet sandwich construction, 30mm walls, side door, sloped front, 2 lashing rails, 4 lashing eyes Technical Data: • Type: New vehicle • TÜV: New/2 years • Availability: IMMEDIATE! • Permissible total weight: 1,500 kg • Unladen weight: approx. 555 kg • Payload: approx. 945 kg • Internal dimensions: 305 x 152 x 193 cm (L x W x H) • Total external dimensions: 454 x 203 x 257 cm (L x W x H) • Loading edge height: approx. 59 cm • Brakes: Yes • Jockey wheel: Yes • 100 km/h approval: optional (surcharge) • Incl. vehicle documents Body Construction: • Floor: wooden, Finnish multiplex board • Walls: 30mm steel sheet sandwich • Roof material: 25mm GRP sandwich • Chassis: ALKO rubber torsion axle • Number of lashing eyes: 4 pcs (750 kg/daN) • Rear door: No • Rear ramp: Yes • Rear ramp material: aluminum • Rear ramp/door function: rotary bar lock • Interior light: optional (surcharge) • Prop stands: optional (surcharge) • Overrun device & brake: Yes • Frame/chassis: V-drawbar, hot-dip galvanized • Lighting connector: 13-pin • Approval: COC papers Standard Equipment: • Robust V-drawbar, hot-dip galvanized • Tandem axle • Overrun coupling by ALKO • Floor panel in Finnish multiplex • Side walls in solid 30 mm steel sheet sandwich • Roof in 25 mm GRP sandwich • Aluminum loading ramp, reinforced version • Stainless steel rotary bar lock and galvanized hinges • Rear frame and finishing profiles in special aluminum profiles • 4 lashing points in the floor, 750 kg tensile force per lashing point • Lashing rails preinstalled on both sides of the trailer • Automatic jockey wheel • Reversing automatic brake • Plastic fenders • 13-pin plug • Reversing light • Large, safety-certified lighting • Integrated rear fog light • Body: splash-proof • Documentation: COC papers Extras included in the price: • Side door lockable from inside and outside • Roof sloped at front for fuel savings • Aluminum loading ramp at rear Optional accessories (retrofit possible – please inquire): • Anti-theft device • Rear support legs • 100 km/h approval with shock absorbers Iodpfoyivb Uox Aa Eeti • Additional side door • Motorcycle wheel chocks • Motorcycle stand rails • Motorcycle tie-down straps • Additional lashing straps • Additional lashing eyes • Additional perforated rails for tension belts & cargo bars • Bar rail with rubber coating for tension belts & cargo bars • Cargo bars in steel or aluminum • Interior lights • Reversing lights • Many more options New vehicle with warranty and TÜV. - Financing or leasing available - Nationwide delivery available - Vehicle registration documents can be sent in advance or transit plates (Germany) can be provided - Export plates including customs declaration possible Descriptions and images are protected by copyright! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available from stock! For over 30 years we have been a specialist dealer and workshop for Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Ifor Williams / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix and many other brands. - Subject to errors, technical changes, and prior sale -

Condition: new, empty load weight: 590 kg, maximum load weight: 2,010 kg, overall weight: 2,600 kg, axle configuration: 2 axles, loading space length: 2,760 mm, loading space width: 1,500 mm, loading space height: 300 mm, loading space volume: 1.3 m³, color: silver, construction height: 1,010 mm, working width: 1,570 mm, Hydraulics, automatic reverse drive, hot-dip galvanizing, roof window, * IMMEDIATELY AVAILABLE * incl. solid steel floor Technical data: - Type: New vehicle - TÜV: New/2 years - Availability: IMMEDIATELY! - Gross vehicle weight: 2,600 kg - Unladen weight: 590 kg - Payload: 2,010 kg - Interior dimensions: 276 x 150 x 30 cm (L x W x H) - Overall exterior dimensions: 420 x 157 x 101 cm (L x W x H) - Loading sill height: 73 cm - Tires: 165R13C steel rims - Brakes: yes - Support wheel: yes, automatic - 100km/h: for an extra charge - Incl. vehicle documents: incl. vehicle documents. Vehicle superstructure: - Brake: yes - Number of axles: 2 - Floor: solid steel floor, 3mm solidly reinforced - Drop sides: anodized aluminium, double-walled double-walled - Dropside height: 30 cm - Dropside folding: 4-sided - Dropside removable: 4-sided - Dropside hinges: 3 side / 2 front + rear, bolted - Corner stanchions removable: Yes, all removable - Locks: Long lever locks, internal - Swivel dropside: No - Number of pallet spaces: 3 - Multifunctional vehicle:No - Tipping / lowering function:Without - Hydraulic pump:Cordless screwdriver pump - Number of stages cylinder:3-stage - Tipping angle (R/S):45 - Battery charging function:- - Overrun device/brake: ALKO - Frame/chassis:Welded steel frame - Galvanization: Hot-dip galvanized - Drawbar: V-drawbar, continuous, square tube - Mudguards: Steel mudguards - Superstructures / attachments: Optional, attachable - Ramp shaft: No - Ramps/ramp flap: Optional - Ramp type: - - Ramp load: - - Drive-on angle: - - Supports: Optional, can be retrofitted - Lashing eyes: 6 - Rear lighting: Incandescent lamps, lamps recessed in rear frame - Side lighting: - - Plug for lighting: 13-pin - Vehicle documents: ZBII & COC documents Accessories can be retrofitted - please enquire: - Unique, torsion-resistant side member chassis for safe driving characteristics - Anodized double-walled aluminium drop sides - All drop sides can be folded and removed - Removable steel corner stanchions - Insertion option at all 4 corners for tarpaulin frames, grid attachment, drop side attachments or front wall extension - Recessed long lever locks - Full steel floor 3mm hot-dip galvanized ? extremely robust - drawbar and frame hollow profile construction welded and completely hot-dip galvanized - many cross beams therefore high point load - all cross and longitudinal beams rest on the floor - 6 lashing troughs foldable, mounted recessed in the floor frame profile (600DaN/kg) - 4 lashing eyes under the loading area - solid 3-stage hydraulic cylinder - hydraulic unit Pumpless- tipping with pump driven by cordless screwdriver - maintenance-free rubber spring axles from ALKO - automatic reverse drive - automatic tipping with pump driven by cordless screwdriver - maintenance-free rubber spring axles from ALKO - automatic reverse drive - automatic tipping with pump driven by cordless screwdriverALKO overrun device and parking brake - 13-pin plug - reversing lights - large safety lighting - integrated rear fog light - lighting recessed in the rear frame - support wheel in the middle with clamp New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - Isdpfx Aasu Ht Umj Eoti

Condition: new, empty load weight: 979 kg, maximum load weight: 2,521 kg, overall weight: 3,500 kg, axle configuration: 3 axles, loading space length: 5,500 mm, loading space width: 2,270 mm, color: black, construction height: 800 mm, working width: 2,290 mm, Automatic reverse drive, tiltable loading area / drive-on ramps / multifunctional trailer / ramp shaft / perforated lashing floor, tiltable loading area, hot-dip galvanized, * IMMEDIATELY AVAILABLE * including tiltable loading area / drive-on ramps / multifunctional trailer / ramp shaft / perforated lashing floor TECHNICAL DATA - Make: Brian James - Model: Connect 476 - Vehicle type: High loader - Vehicle condition: New vehicle - First registration: Without first registration - TÜV/HU: 2 years from first registration - Internal dimensions (LxWxH): 550 x 227 x 0 cm - External dimensions (LxWxH): 717 x 229 x 80 cm - Loading height of floor: 65 cm - Perm. Total weight: 3,500 kg - Unladen weight: 979 kg - Payload: 2,521 kg - Chassis: High loader (wheels under the body) - Tyres: 195/60R12C - Chassis: ALKO rubber suspension axle - Support wheel: Yes - 100 km/h approval: Optional, can be retrofitted DESCRIPTION - Most adaptable multifunctional trailer for commercial goods and vehicle transport of all kinds. - Every available option can be flexibly attached or detached and thus enables customization for almost any application - Perforated steel lashing floor in combination with 18 mm multiplex floor offers high slip resistance and is extremely wear-resistant, even under the toughest operating conditions. - Insertion option at all 4 corners for drop sides, tarpaulin frames, drop side attachments or front wall elevation - vehicle also designed for all options after purchase: enormous potential for retrofitting - very stable welded steel frame - contact edge for drive-on ramps can be moved for different track widths - numerous lashing points punched directly into the frame enable professional load securing - integrated ramp shafts - high-quality perforated steel ramps, galvanized, L=2.35m, the pair - tiltable cargo bed with manual hydraulic hand pump - side panels color: black - frame cpl. Sturdy net hooks under the loading area - Spare wheel mounted on the drawbar for easy access - Automatic reverse - ALKO overrun device and parking brake - Cast steel coupling head with integrated ALKO high-security lock - Very stable V-drawbar REINFORCED - 13-pin plug - Reversing lights - Large LED safety lighting - Complete LED lighting: Extremely bright, durable and reliable. - dynamic LED indicators are clearly visible even in bad weather - robust protection for the rear lights - integrated rear fog light - various front, side and rear marker lights - heavy-duty support wheel - 5-year chassis warranty Accessories can be retrofitted - please enquire! - Supports - Storage box - Drop sides - Drive-on flap -. Winches - attachments New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale excepted - Ijdpfju Hrnlox Aa Ejti

Condition: used, Year of construction: 2007, Clark CMPD25 Iedpfsx Ivm Nox Aa Eoti Bj 2007 Capacity 2500kg Triplo / diesel

Condition: good (used), Aluminum plate aluminum 252 x 128 x 6cm workbench worktop Heavy aluminum plate -37- Ijdpfx Aajiu Uzuo Ejti Aluminum 252 x 128 x 6cm Workbench worktop. More items - new and used - you will find in our store! International shipping costs on request!

Condition: new, empty load weight: 400 kg, maximum load weight: 350 kg, overall weight: 750 kg, loading space length: 2,510 mm, loading space width: 1,320 mm, loading space height: 1,520 mm, loading space volume: 4.9 m³, color: white, construction height: 2,080 mm, working width: 1,760 mm, Hydraulics, automatic reverse drive, hot-dip galvanizing, unbraked, drive-on flap, plywood superstructure 15 mm roof/walls, 6 lashing eyes, * IMMEDIATELY AVAILABLE * with drive-on flap, plywood superstructure 15 mm roof/walls, unbraked, 6 lashing eyes Technical data: - Type: New vehicle - TÜV: New/2 years - Availability: IMMEDIATELY! - Gross vehicle weight: 750 kg - Unladen weight: 400 kg - Payload: 350 kg - Interior dimensions: 251 x 132 x 152 cm (L x W x H) - Overall exterior dimensions: 375 x 176 x 208 cm (L x W x H) - Loading sill height: 50 cm - Tires: 145/80 R13 steel rim - Brake: no - Support wheel: yes - 100km/h: included! - incl. vehicle documents Vehicle superstructure: - Floor: Wood, screen-printed board 15mm - Walls: 15mm plywood, plastic-coated - Roof material: 15mm plywood, plastic-coated - Chassis: ALKO rubber spring axle - Number of lashing eyes: 6 pieces (400kg/daN) - Tailgate: No - Tailgate: Yes - Tailgate material: Plywood reinforced - Tailgate/door function: espagnolette lock - Clearance dimensions tailgate/flap: 120x147cm - Interior light: Yes, with switch - Supports: at an extra charge - Overrun device & brakes: no Additional charge - Overrun device & brake: no - Frame/chassis: V-drawbar, hot-dip galvanized - Lighting plug: 13-pin - Approval: COC papers Standard equipment: - stable V-drawbar, hot-dip galvanized in immersion bath - overrun device from ALKO - base plate 15 mm thick - side walls and roof made of multi-layer wood, 15 mm thick, with UV-resistant plastic coating - interior light mounted - single-wing door at the rear - galvanized espagnolette lock and hinges - lashing rings in the frame profile, tensile force 400 kg per lashing ring, Dekra tested - support wheel - plastic mudguards - 13-pin plug - reversing lights - large rear lights - rear lights - rear lights - rear lights - rear lights - rear lights - rear lights - rear lights. plug - reversing lights - large safety lighting - integrated rear fog light - body: splash-proof - registration papers: ZBII & COC papers Special equipment included in the price: - White drive-over wall instead of rear door, with drive-over point Accessories can be retrofitted - please enquire: - Anti-theft device - Rear supports - 100km/H approval with wheel bumper - Side door - Motorcycle rocker panels - Motorcycle stand rails - Motorcycle lashing straps - Lashing straps - Additional lashing eyes - Slot-and-hole rails for tensioning straps & locking bars - Rod strip with rubber coating for tensioning straps & locking bars - Steel or aluminum locking bars - Interior lights - Reversing lights - and much more. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale reserved - Iodpju Htavjfx Aa Esti

Condition: ready for operation (used), Year of construction: 2009, A wood dust extraction and filtration system Krämer for saw lines is available. 1) Wood dust extraction unit Krämer VKA-P 100/650/55, air volume flow: 27000m³/h, pressure increase: 3800Pa, motor power: 55kW, V-belt length: 3550mm. 2) Filtration unit Krämer GFS Shake 160/25/250, filtration capacity: 30000m³/h, filter material: polyester needle felt, material discharge: TFS40/10/1.1. 3) Fan Krämer VFM-R 45/250/3, air volume flow: 3000m³/h, pressure increase: 2500Pa, motor power: 3kW. 4) Fan Krämer VFM-P 42/200/4, air volume flow: 2500m³/h, pressure increase: 3000Pa, motor power: 4kW. 5) Separator tank/filter hopper Krämer. 6/7) 2x axial fans. Including pipes and peripheral equipment. The motor flange on the discharge motor is defective. Documentation available. An on-site inspection is possible. Ijdpfsxl Elgex Aa Eoti

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 110 mm, spindle speed (max.): 160,000 rpm, spindle speed (min.): 8,000 rpm, workpiece weight (max.): 250 kg, overall weight: 6,000 kg, travel distance W-axis: 400 mm, Hauser Coordinate Grinding Machine S35. Fully functional. Very good motors and additional accessories available. The machine is under power and can be inspected. Grinding trials can be arranged by appointment. U-axis in excellent condition. Positioning is highly precise. C-axis for contour grinding is available and fully operational. Control: Fanuc O-M The machine is in daily use and continues to be highly accurate. Fanuc components have been replaced over the last two years. Old parts have been exchanged for new ones. Machine is being sold - > bought as seen -> "As is where is" - no manufacturer or seller warranty. Itedpfxsxp Hq Es Aa Eji Training on the machine and control system is possible at any time, either at our facility or on your premises. (We are also happy to assist with any further questions.)

Year of construction: 1970, condition: ready for operation (used), Three old metalworking an tooling machines are available. 1) Milling machine Klopp FWU 13/6, year of manufacture: 1970, table length: 1905mm, machine dimensions with extended table: 2805mm/2000mm/1660mm, weight: approx. 2200kg. Without vice, with defective display. 2) Precision flat grinding machine Georg Müller MPS2, year of manufacture: 1971. 3) Plate shear Reinhardt RAS 52.80, year of manufacture: 1971, working width: 1540mm, power: 5.5PS, max. sheet thickness: 2mm, table height: 750mm, machine dimensions X/Y: approx. 2150mm/2020mm, weight: approx. 860kg. The mechanical lifting unit of the machine is defective. Documentation available. On-site inspection is possible. Individual sale possible. Itedju Eumhopfx Aa Eji

Condition: new, empty load weight: 1,010 kg, maximum load weight: 2,490 kg, overall weight: 3,500 kg, axle configuration: 3 axles, loading space length: 4,600 mm, loading space width: 1,980 mm, loading space height: 300 mm, loading space volume: 2.8 m³, color: silver, construction height: 1,680 mm, working width: 2,530 mm, incl. rear ramp / parabolic suspension / spare wheel / bucket storage, automatic reverse drive, drive-on ramp, hot-dip galvanizing, *INSTANTLY AVAILABLE incl. rear ramp / parabolic suspension / spare wheel / bucket storage Technical data: - Type: New vehicle - TÜV: New/2 years - Availability: IMMEDIATELY !!! - Gross vehicle weight: 3,500 kg - Unladen weight: 1010 kg - Payload: 2,490 kg - Interior dimensions: 460 x 198 x 30 cm (L x W x H) - Overall exterior dimensions: 660 x 253 x 168 cm (LxWxH) - Loading sill height: 38 cm - Tires: 195/60R12C - Brake: yes - Support wheel: yes, automatic - 100 km/h: optional - incl. vehicle documents Vehicle body: - Brake: yes - Number of axles: 3 - Floor: Wood, Finnish multiplex board - Side walls: Sheet steel, single-walled - Side wall height: 30 cm - Locks: Eccentric locks - Number of pallet spaces: 7 - Multifunctional vehicle: No - Tipping / lowering function: None - Hydraulic pump: - - Overrun device/brake: KNOTT - Frame/chassis: Welded steel frame - Galvanization: Hot-dip galvanized - Drawbar: V-drawbar, bolted, C-profile - Mudguards: Aluminium chequer plate mudguards - Spare wheel: Yes - Bucket storage: Yes - Superstructures / attachments: No - Ramp shaft: No - Ramps/ramp flap: Yes - Ramp type: Continuous tailgate - Ramp load: - - Drive-on angle: approx. hot-dip galvanized - steel drive-on flap standing on shaft 130cm - sturdy eccentric locks - support brackets on drive-on flap - lifting aid for drive-on flap - very low chassis for low drive-on angle - excavator bucket rest at the front - spare wheel, mounted under excavator bucket support - 10x lashing rings mounted in the outer frame (1000dAN/kg) - 10x lashing rings on the inside - parabolic spring axle from KNOTT - parabolic spring axle for absolutely heavy-duty use - automatic reverse drive - KNOTT overrun device and parking brake - lockable coupling head - spare wheel, mounted under excavator bucket support - very sturdy bolted V-drawbar REINFORCED - 13-pin plug - return driving license - very sturdy bolted V-drawbar - 13-pin plug - return driving license - return driving license. plug - reversing lights - generously dimensioned safety lighting - integrated rear fog light - lighting recessed in rear frame - lane departure lights at rear with rubber arm - heavy-duty support wheel in the middle Accessories can be retrofitted - please enquire: - 100 km/h approval - storage box - net hooks - additional lashing eyes - reversing lights - lashing straps - and much more. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale excepted - Isdpfju Hrlqex Aa Ejti