Used Gustos D-5-3000-D for sale (86,033)

Condition: used, mileage: 926,538 km, power: 210 kW (285.52 HP), first registration: 09/2006, fuel type: diesel, number of seats: 37, gearing type: automatic, next inspection (TÜV): 04/2027, emission class: euro5, color: red, brakes: retarder, Equipment: ABS, electronic stability program (ESP), soot filter, In accordance with our "General Terms and Conditions," without any guarantee or warranty, we can offer you the following vehicle on a non-binding basis, subject to final sale, errors, typographical errors, and prior sale: Mercedes Benz Citaro (emergency seats) (Vehicle 155) First registration: 08.09.2006 926,538 km Engine: 6,374 cc 210 kW / 286 hp Euro 5 EEV MOT valid until 01/2027, technical inspection valid until 10/2026 Permissible gross vehicle weight: 19,000 kg, unladen weight: 11,340 kg, payload: 7,660 kg Overall length: 12,000 mm x overall width: 2,550 mm x overall height: 3,100 mm Fsdpfjz H Ecrex Al Aogh Tires: 275/70R22.5, front: 80% remaining tread, rear: approximately 30/30% remaining tread, inner tires: approximately 40/40% remaining tread Double doors at the front and rear Driver's cab with door Ramp Fully automatic transmission Microwave Manual windows 2 x electric and heated mirrors Auxiliary heating + 2nd heating Retarder Stop brake LAWO system connected to the cash register Emergency stop 12-volt socket Tie rods corroded 14.02.2024: Alternator tensioner replaced, 07.05.2025: Radiator replaced, water pump sealed, 07.04.2026: Upper control arms on the front axle (left and right) replaced, 26.07.2024: Brakes and discs on the front axle replaced, both brake chambers on the front axle replaced, 29.10.2024: Pressure switch for the air system, circuit 1+2, replaced with air line, 24.01.2025: Four-circuit pressure valve replaced Various signs of wear and tear, consistent with the vehicle's age Last inspection: 21.01.2025 at 873,162 km, next inspection due at 933,162 km Price: 3,000.00 (net) All information is provided without any guarantee or warranty. Our "General Terms and Conditions" apply. The place of jurisdiction for both parties for disputes up to a value of €10,000 is the district court of Ludwigslust; for disputes exceeding this value, it is the regional court of Schwerin. Errors, typographical errors, and prior sale are reserved.

Condition: used, mileage: 156,000 km, fuel type: diesel, Year of construction: 2021, FIAT DOBLÒ, 5 SEATS, COMMERCIAL VEHICLE, YEAR 2021, 1.3MJT ENGINE WITH 95 HP, 156,000 KM, AIR CONDITIONING, TOUCHSCREEN STEREO, STEERING WHEEL CONTROLS, DUAL SIDE DOORS, ONE OWNER, 1-YEAR WARRANTY, FINANCING AVAILABLE Fgedey Itpbjpfx Al Ajh

Condition: used, mileage: 125,000 km, power: 206 kW (280.08 HP), first registration: 03/2009, fuel type: diesel, overall weight: 15,000 kg, axle configuration: 2 axles, brakes: retarder, color: grey, gearing type: automatic, emission class: euro5, Equipment: ABS, air conditioning, compressor, navigation system, parking heater, MAN 15 280 Horse Truck, 5 Horse Capacity, Pop-Out Private sale, VAT not included. * 5 sleeping berths * Leather seating area with table, convertible into a sleeping area * Sleeper cab above the driver's cab * Additional bed above the bathroom * Automatic climate control * Webasto auxiliary heater * Dometic diesel generator * 300-liter fresh water tank * Large hot water boiler * High-quality kitchen with granite countertop * Refrigerator and microwave * Large bathroom with shower, sink, and toilet * TV and sound system * Numerous storage and wardrobe compartments Horse compartment for 4-5 horses * Padded, adjustable aluminum partitions * Soft rubber flooring * Feed trough * 2 electric roof vents * Electric fan * Opening windows * Video surveillance * Interior lighting * Ceiling storage * Direct access to the living area Exterior & Storage * Rear and side ramp with ramp limiters * Large lockable storage compartments * Separate tack room * Horse shower * Show box included in the purchase price Errors/input errors and prior sale reserved. * NET PRICE POSSIBLE. * Top leasing offers Location and viewing of our vehicles: STX HORSETRUCKS GERMANY Hamburgerstrasse 65 23816 Leezen Fgsdpfez Hta Eex Al Ash Sales and service for all brands in the field of horse trucks and trailers. Please arrange an appointment in advance. Contact: Richard Theurer and Andreas Theurer

Condition: used, mileage: 599,947 km, power: 213 kW (289.60 HP), first registration: 12/2013, fuel type: diesel, number of seats: 38, gearing type: automatic, next inspection (TÜV): 07/2027, emission class: euro5, color: white, brakes: retarder, Equipment: ABS, electronic stability program (ESP), soot filter, In accordance with our "General Terms and Conditions," without any warranty whatsoever, we can offer you the following vehicle on a non-binding basis until the conclusion of the sale, subject to errors, typographical errors, and prior sale: MAN Lions City LE A78, 38+40+1 + 2 emergency seats (Vehicle 115) First registration: December 16, 2013 599,947 km Engine: 6,871 cc 213 kW / 289 hp Euro 5 EEV MOT until 10/2026, technical inspection until 07/2027 Permissible total weight: 19,500 kg, unladen weight: 11,285 kg, payload: 7,215 kg Overall length: 11,895 mm x overall width: 2,550 mm x overall height: 3,225 mm Double doors at the front and rear Driver's cab with door 38+2 emergency seats + 40+1 Fold-out ramp Auxiliary heater + 2nd heater Retarder Fully automatic transmission Microwave 2 x electric mirrors + mirror heating 12-volt socket Emergency exit Stop brake Driver's seat ISRI with heating and ventilation Lawo system connected to the cash register Tires: 275/70R22.5, front approx. 60%, rear approx. 80/80% Various signs of wear and tear, consistent with the age Good overall condition Last inspection at 565,195 km on April 23, 2025, next inspection at 625,195 km January 20, 2025: Air reservoir replaced. October 2, 2025: Head gasket + valve cover gasket + engine mount on the passenger side rear replaced. January 28, 2026: Brake pads on the front axle replaced, brake caliper on the front axle, driver's side, replaced. Price: €12,000.00 (net) Fjdpfx Alez Iihuj Aogh All information is provided without any warranty whatsoever. Our "General Terms and Conditions" apply. The place of jurisdiction for both parties for disputes up to a value of €10,000 is the district court of Ludwigslust; for disputes exceeding this value, it is the regional court of Schwerin. Subject to errors, typographical errors, and prior sale.

Condition: used, Year of construction: 2001, operating hours: 3,824 h, Rental possible Fgodpfx Aoz Hid Hjl Ash = Further information = Please contact Tobias Ebert for more information.

Condition: new, weight max. 5 t workpiece diameter 300 - 2500 mm drum diameter 250 x 100 mm feed 100 - 1000 mm/min total power requirement 0,75 kW weight 0,6 t dimensions 1,5 x 1,0 x 0,6 m characteristics • Self-aligning for multiple diameters • Infinitely variable speed of the drive unit • Polyurethane coating of the rollers • Optimum load distribution (4 rolls/unit), particularly gentle for workpieces with low wall thickness and sensitive surfaces Fgedepam Hnjpfx Al Aeh • High stability due to the solid construction of the machine • CE certificate • Very good value for money • Remote control on the cable • Documentation in English

Condition: used, functionality: fully functional, Year of construction: 2015, operating hours: 8,714 h, load capacity: 4,500 kg, lifting height: 3,700 mm, fuel type: diesel, mast type: simplex, construction height: 2,771 mm, fork carriage width: 1,400 mm, fork length: 2,200 mm, empty load weight: 6,880 kg, total length: 3,200 mm, drive type: Diesel, construction width: 1,600 mm, Diesel forklift Load center: 500 ISO class: FEM 3 A Mast type: Standard Fedpfxjz H E A Sj Al Ajgh Transmission: Hydrostatic Technical condition: good Front tire type: Pneumatic Front tire size: 2 x 300R15 Front tire condition: 40 - 60% Rear tire type: Superelastic Rear tire size: 2 x 250/70R15 Rear tire condition: 0 - 20% Battery year of manufacture: 2015 Double auxiliary hydraulics, integrated fork positioner with side shifter, cabin with heater, 4 work lights at the front, 1 work light at the rear.

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 9,015 h, load capacity: 2,500 kg, lifting height: 4,650 mm, free lift: 1,420 mm, fuel type: diesel, mast type: triplex, construction height: 2,180 mm, fork carriage width: 1,150 mm, empty load weight: 4,430 kg, total length: 2,700 mm, drive type: Diesel, construction width: 1,320 mm, Diesel forklift Load center: 500 ISO class: FEM 2 A Mast type: Triplex Fjdpfx Alsz H E Dco Aogh Transmission: Hydrostatic Technical condition: good Front tire type: Superelastic Front tire size: 2 x 27x10-12 Front tire condition: 60 - 80% Rear tire type: Superelastic Rear tire size: 2 x 23x9-10 Rear tire condition: 60 - 80% Battery year of manufacture: 2019 Additional single hydraulic circuit, 3rd valve to fork carriage, full free lift, single-pedal and single-lever operation

Condition: used, functionality: fully functional, Year of construction: 2013, operating hours: 17,812 h, load capacity: 5,000 kg, lifting height: 3,100 mm, fuel type: diesel, mast type: simplex, construction height: 2,471 mm, fork carriage width: 1,350 mm, empty load weight: 6,675 kg, total length: 3,100 mm, drive type: Diesel, construction width: 1,450 mm, Diesel forklift Load center: 500 ISO class: FEM 3A Mast type: Standard Transmission: Hydrostatic Technical condition: good Front tire type: Superelastic Front tire size: 2 x 300-15 Fgodpfx Aloz H E Nfo Ash Front tire condition: 60 - 80% Rear tire type: Superelastic Rear tire size: 2 x 250-15 Rear tire condition: 60 - 80% Battery year of manufacture: 2013 Additional single hydraulic circuit, fully enclosed cabin with heater, dust protection, single-pedal operation, single-lever operation, 2 work lights at the front, 1 work light at the rear.

Condition: new, functionality: fully functional, Year of construction: 2024, screw conveyor diameter: 20 mm, screw conveyor length: 25 mm, noris- Extruder MINI ESE 20/25 D Technical data Screw diameter [mm] 20 Screw length [L/D] 25 Screw speed [min-1] 20-200 min -1 Screw axial pressure [bar] 300 Continuous load 350 maximum Drive Three-phase drive with frequency converter Drive power [kW] max. 2.5 Reduction gear with integrated axial bearing Weight [kg] approx. 160 Dimensions [Lx Wx H] [mm] approx. 1050 x 600x 1590 *) Electrical connection values 3 / N / PE Supply voltage [V] 400 at 50 Hz Control voltage [V] 230 Temperature control electrical resistance heating bands in mica design. Max. processing temperature [°C] 300 Switch cabinet and control panel The electrical installation of the extruder is located in the machine base. The base contains all the necessary switching, control and display devices. The feed zone is water-cooled, the water connection is provided by the customer, a cooling unit for cooling the water is not included in the offer. Extruder tools are not part of the offer Fgjdohx Elfopfx Al Ajh

Condition: new, table diameter 1500 mm Fgjdpofv Axfefx Al Aeh table load 5,0 t swivelling range 0 - 135 Grad turning speeds 0,05 - 0,5 U/min max. torque on the faceplate 10000 Nm table pass 200 mm welding current 700 Ampere total power requirement 1,5 + 3,0 kW weight of the machine ca. t ELDING TABLE WITH LARGE THROUGH BORE • Self-locking gearbox, no pre- or after-run with eccentric load. • Electronic components from Siemens and Schneider. • Frequency-controlled, very accurate speed control. • Turntable with large through hole and T-slots. • High stability through a clever construction. • CE certificate. • Very good price / quality ratio. • The D-TLP series comes with remote control and foot pedal (left / right). No original pictures. Design but identical.

Condition: new, table diameter 1500 mm table load 5 t swivelling range 0 - 130 Grad turning speeds 0,05 - 0,5 U/min 10000 Nm 0 1,5 / 1,5 kW welding current 700 Ampere Fgodpfxjfv Ax Us Al Ajh • Self-locking gear, therefore no forward and backward at eccentric load. • Electronic components from Schneider, Siemens and Delta. • Frequency-controlled stepless speed of the turntable. • High stability due to the robust construction. • welding power transmission • CE certificate. • Very good price / quality ratio. • The D-HBE series comes as a standard version with a cable remote control and delivered with a footswitch.

Condition: new, Table dimensions 800 x 800 mm table load 1500 Kg swivelling range 0 - 105 Grad turning speeds 0,15 - 1 U/min height adjustment 672 - 1180 mm hollow spindle diameter mm welding current 500 Ampere max. torque on the faceplate 3000 Nm total power requirement 0,75 kW dimensions of the machine ca. 1560x1120x750 m Characteristics: • Made in EU • Self-locking gear, therefore no leading and trailing at eccentric load • Hydraulic height adjustment allows almost limitless positioning • Electronic quality components from Schneider / Siemens / Delta • Frequency-controlled stepless speed of the turntable • High stability through a heavy and compact design • CE certificate • Very good value for money • Standard version comes with remote control and dual foot pedal Fsdsfv Azpepfx Al Aegh • 3 years warranty (see warranty conditions) • Hydraulically height adjustable with locking system (for fall protection)

Condition: new, weight max. 150 t workpiece diameter 1000 - 6300 mm Fedpjfv A Dyefx Al Aegh drum diameter 500 x 300 mm feed 100 - 1000 mm/min total power requirement 8 kW

Condition: used, Year of construction: 2015, operating hours: 8,195 h, load capacity: 2,500 kg, lifting height: 4,700 mm, fuel type: diesel, mast type: triplex, construction height: 2,960 mm, motor manufacturer: VW, gearing type: automatic, fork length: 1,200 mm, Equipment: 3rd hydraulic function, 4th hydraulic function, UVV, air conditioning, cabin, hydraulic fork positioner, lighting, pallet forks, sideshift, Technical Specifications * Manufacturer: Linde Material Handling * Model: H25D - 02 * Year of Manufacture: 2015 * Load Capacity: 2,500 kg * Operating Hours: 8,195 h * Mast: Triplex * Lifting Height: approx. 4,700 mm * Free Lift: approx. 1,600 mm * Side Shifter and Fork Positioner * Drive: Diesel * Dead Weight: 3,725 kg Equipment: * Air Conditioning * Heater * Lighting according to STVO (German Road Traffic Regulations) * Triplex Mast * Work Lights: 2 front, 2 rear * Reversing Light * Comfort Seat with Seat Heating * Hydraulic Additional Functions: 3rd and 4th Valve * CE Version Condition * Immediately ready for operation * Recently serviced * Next service due in approximately 900 operating hours * Engine and hydraulics are functioning perfectly * Technically in good condition * Optically well-maintained Fgedpfx Aoz H Tm Sol Ajh Price: 16,900 EUR net, negotiable Inspection and test drive possible by arrangement. Loading and transport can be arranged. If you have any further questions, please feel free to write or call.

Condition: used, first registration: 06/2006, overall weight: 3,500 kg, Equipment: crane, Crane: Fgedpoz E Uf Tofx Al Ash ----- Palfinger PK16502-5 - Radio remote control - 5x hydraulic extensions - Quick-change system

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, operating hours: 4,252 h, load capacity: 4,500 kg, lifting height: 5,500 mm, free lift: 2,050 mm, load center: 700 mm, fuel type: diesel, mast type: triplex, construction height: 2,900 mm, motor manufacturer: PERKINS, gearing type: hydrostat, fork carriage width: 1,250 mm, fork length: 1,400 mm, fork width: 150 mm, fork thickness: 60 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 200 / 50 - 10, rear tire type: cushion tires (black), rear tire size: 250 - 15, overall weight: 11,690 kg, empty load weight: 7,190 kg, total height: 2,600 mm, total length: 2,650 mm, total width: 2,250 mm, color: orange, Equipment: 3rd hydraulic function, 4th hydraulic function, CE marking, all wheel drive, cabin, fork extension, front guard, head guard, hydraulic fork positioner, lighting, pallet forks, 🔥 HUBTEX DQ45-D | TRIPLEX 5500 MM | FORK POSITIONER | FREE LIFT | FULL CABIN | READY TO WORK 🔥 🔧 FULLY SERVICED MACHINE | 🛡️ WARRANTY | 🚛 TRANSPORT THROUGHOUT EUROPE AND WORLDWIDE If you are looking for a forklift that will start generating profit from day one instead of incurring service costs, this offer is for you. We offer a proven and professionally prepared HUBTEX DQ45-D multidirectional forklift. The machine has undergone a complete technical inspection, full service, and thorough testing. It is ready for immediate operation in a production facility, warehouse, or logistics center. ⭐ KEY ADVANTAGES ✔ Full service completed before sale ✔ Start-up warranty ✔ Brand new super elastic tires ✔ Very good technical and visual condition ✔ Ready to work without additional investment ✔ Live online presentation available ✔ Direct delivery to your company available 📋 TECHNICAL DATA 🏭 Manufacturer: HUBTEX 🔹 Model: DQ45-D 📅 Year: 2012 🏋️ Lifting capacity: 4500 kg Fodsz H A R Hepfx Al Aegh ⛽ Engine: DIESEL ⏱️ Operating hours: 4252 h ⬆️ Mast: TRIPLEX 📏 Lifting height: 5500 mm 🔝 Free lift: 2050 mm ↔️ Fork positioner: 1250 mm 🔱 Fork length: 1400 mm ⚖️ Load center: 700 mm 🚪 Cabin: Full and heated ⚙️ Operating weight: 7190 kg 📐 DIMENSIONS ↕️ Height: 2600 mm with air conditioning ↔️ Length: 2650 mm ↔️ Width: 2250 mm 📏 Overall construction height: 2900 mm 🛞 TIRES Front: 200 x 50 - 10 SE super elastic Rear: 250 - 15 SE super elastic Condition: 100 percent NEW ⚙️ EQUIPMENT ✔ Fork positioner ✔ Full heated cabin ✔ Free lift ✔ Working lights ✔ Warning beacon ✔ Windscreen wipers ✔ Sliding windows ✔ Camera system 🏗️ IDEAL FOR 🪵 Timber industry 🏭 Steel mills and steel stockholders 🔩 Steel construction manufacturers 🔧 Handling pipes, profiles, and long materials 🏢 Indoor and outdoor operation 💼 WHY FT LOGISTICS FT LOGISTICS specializes in forklifts, sideloaders, multidirectional forklifts, and professional warehouse equipment. Every machine undergoes a technical inspection, complete service, and comprehensive testing before delivery to the customer. 🌍 We have more than 100 machines available in stock and deliver equipment throughout Europe, South America, Africa, Asia, and the Middle East. 🤝 WE PROVIDE ✔ Full service before sale ✔ Warranty ✔ Professional technical advice ✔ Leasing and financing ✔ International transport organization ✔ Export services and customs documentation ✔ After-sales support Hundreds of customers throughout Europe have trusted our machines and return to us for further purchases. 📹 Live online machine presentation available 📸 Additional photos and videos on request 🚛 Individual worldwide transport quotation available FT LOGISTICS 🚀 WE DELIVER MACHINES READY TO WORK.

Condition: new, Bosch DSM 04 A 2101-D, No. 1070075000-202, serial number: 001299670, unused, in open original packaging, 100% functional. Scope of delivery as shown in the photos. Fjdpfx Aji D T Uisl Ajgh

Condition: ready for operation (used), Okuma BDU-30A Brushless Servomotor Drive Unit with E4809-045-061-D, serial number as shown in the photo, used, with normal signs of wear, 100% functional. Fsdpfx Alsi D Naaj Asgh

Condition: ready for operation (used), Bosch DSM 04 A 2101-D, No. 1070075000-202, Serial No.: 001299671, used, shows normal signs of wear, 100% functional, scope of delivery as shown in the photos. Fjdpsi D T Umefx Al Aogh

Condition: new, Müller Co-Ax 5-PCS-2 10 NC valve with external 24V DC actuator, unused, 100% functional, scope of delivery as shown in the photos. Fsdpei Eb Tajfx Al Aogh

Condition: new, Indramat DDS02.1-W015-D controller, serial number: 263496-48917, unused, in opened original packaging, 100% functional, scope of delivery as shown in the photos. Fjdpfsi Ebf Hox Al Aogh

Condition: used, fuel type: diesel, color: red, lifting height: 21,000 mm, Year of construction: 2023, operating hours: 1,590 h, Empty weight: 14.900 kg Carrying capacity: 4.500 kg GVW: 19.400 kg Dimensions (LxBxH): 673 x 250 x 304 cm = Additional options and accessories = Fgedpfx Ajzrx Egel Aeh - Pallet fork - Stabilizers

Condition: used, Harmonic Drive planetary gearbox HPS-180-5-Di- removed from Demag Ergotech El-Exis S 60/370-310 Fedpfx Asyxg S Rel Aegh - removed from running machine - fully functionalmanufacturer: Harmonic Drive type: HPS-180-5-Di spare part no.: 12171266

Condition: used, functionality: fully functional, Year of construction: 2026, operating hours: 49 h, load capacity: 5,000 kg, lifting height: 3,700 mm, fuel type: diesel, mast type: duplex, fork carriage width: 1,670 mm, empty load weight: 8,325 kg, drive type: Diesel, construction width: 2,080 mm, Rough terrain forklift Load center: 600 ISO class: ISO Class 4 = 5,000 - 10,000 kg Mast type: Duplex Technical condition: New Front tire type: Pneumatic Front tire size: 18-22.5 MPT-06 Front tire condition: NEW Fgedpfx Aloz Dlm Ej Aeh Rear tire type: Pneumatic Rear tire size: 340/80 R18 XMCL Rear tire condition: NEW Load guard, side shifter, 3rd valve, 4th valve, rear work light, front work light, roof protection, windshield, heater, load guard, oil separator, soot filter, full cabin, CE certificate, safety light, Image may serve as a symbolic representation - Easy Link - LED work lights, front and rear - mechanically sprung vinyl seat