Used Gsl 25 Liter for sale (21,170)

Condition: used, Year of construction: 1995, x-travel 650 mm y-travel 410 mm Itedpfozz S R Ujx Am Hel z-travel 410 mm Control Mitsubishi Meldas 50 M max. turning speeds 6.000 min/-1 tool taper SK 40 Used, untested Additional information – Machine weight: approx. 4,200 kg Dimensions (L x W x H): approx. 2,400 x 2,400 x 2,500 mm Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Subject to changes and errors in technical data and specifications, as well as prior sale!

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1987, machine/vehicle number: 40260, control type: NC control, degree of automation: semi-automatic, actuation type: hydraulic, working width: 3,150 mm, cutting angle (max.): 2 °, stroke rate (min.): 1 1/min, stroke rate (max.): 25 1/min, sheet thickness (max.): 25 mm, sheet thickness aluminum (max.): 30 mm, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 18 mm, back gauge adjustment: manual, back gauge: 1,000 mm, input voltage: 380 V, input current: 93 A, type of input current: three-phase, control voltage: 110 V, overall weight: 42,100 kg, total length: 5,040 mm, total width: 3,150 mm, total height: 3,600 mm, table width: 3,250 mm, Equipment: centralized greasing system, documentation/manual, finger protection, foot remote control, type plate available, Used ERFURT ScTP 25/3150 hydraulic guillotine for sale, manufactured by VEB Kombinat Umformtechnik Erfurt, Germany / GDR. The machine is in working condition and is located at an HMC production facility in Plovdiv. Complete technical documentation is available in German and Russian – passport, acceptance reports, electrical reports, electrical diagrams, technical drawings, and a transportation specification. Key data: Maximum cutting length: 3150 mm. Maximum cutting thickness: 25 mm for St 42 / 42–52 kp/mm². Capacity for St 50 – 23 mm, for St 60 – 21 mm, for St 70 – 19 mm. Cutting angle: 2.5°. Distance between columns: 3250 mm. Rear stop adjustable up to 1000 mm. Main motor: 40 kW, connected power: 42 kW. Power supply: 3 × 380 V, 50 Hz. Machine number according to the nameplate: 40260. The machine features conventional electromechanical control, a hydraulic clamping system, a cutting line indicator, an electrically and manually adjustable rear stop, four-edge cutting blades, and an electrical cabinet. Net weight according to the transportation specification: 41,500 kg. Gross weight: 42,100 kg. Dimensions of the main machine body: 5040 × 3040 × 2970 mm. Itedpfjzh Dtzox Am Hol Price: negotiable. Location: Plovdiv, Bulgaria. Inspection by prior arrangement.

Year of construction: 2012, condition: used, A Atf selective soldering system in need of repair is offered. Process area: 350x250mm, extraction capacity: 200m³/h, power/capacity: 400V 50/60Hz. Machine dimensions X/Y/Z: approx. 1560mm/1375mm/1060mm, weight: approx. 380kg without solder. With spray fluxer, temperature sensor and nitrogen equipment. The Z-axis loses its reference position after repeated operation. Inspection by appointment is possible. Iedpfxjzwpglo Am Hjtl

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, spindle mount: MK 3, Meyer Geared Head Pillar Drill Model:SR25 Spindle Taper: No 3 Morse Spindle Speeds:125-2825 RPM Table Area:350 x 400mm (Hand rise and fall / Swivel) Throat:240mm Motor: 0.75 KW With: Chuck Guard Itsdpfx Aozrnndsm Hsl Safety Brake Low-Voltage Light Dimensions: 700 x 450 x 1900mm High Weight: 400 KGS

Condition: like new (used), operating hours: 12 h, For sale is a KILIA 65-liter high-speed cutter, which will undergo a comprehensive factory overhaul at HELTEK | KILIA. Our factory overhaul is not simply a repair or cosmetic refurbishment. The machine is completely disassembled and rebuilt from the ground up, both technically and visually. The goal is to achieve a condition that consistently meets today's new machine standards for KILIA. This cutter is ideally suited for butcher shops, meat processing plants, and industrial production facilities for the production of a wide variety of meat, sausage, and food products. Scope of the Factory Overhaul The machine is first completely disassembled down to the base frame. This allows areas that are not accessible during normal operation to be refurbished. The factory overhaul includes, among other things, the following work: complete disassembly of the machine new base plate, professionally welded in refurbishment and blasting of the machine frame refurbishment or glass bead blasting of the stainless steel areas high-quality new powder coating of the base frame new main motor or completely overhauled Siemens main motor new motor tensioning device made of stainless steel new bowl drive or new gearbox complete overhaul of the bowl shaft bearing Itjdpez A Ufzsfx Am Hel new bearings and relevant bearing components overhaul or renewal of the bearing seats new or refurbished knife shaft new knife shaft bearing new central lubrication system new wear parts new scrapers, guides, and sliding elements made of food-grade blue POM overhaul of all relevant mechanical components electrical system and controls completely new The electrical equipment is also comprehensively renewed. This includes, among other things: new PLC control system modern 10" HMI touch panel new frequency converters new contactors and relays new lines and cables new or refurbished sensors new safety technology complete rewiring of the relevant machine areas As a result, the cutter receives a modern control architecture with good spare parts availability and high serviceability. Technical Data Manufacturer: KILIA Machine Type: High-speed cutter / meat cutter / bowl cutter Bowl capacity: 65 liters Knife shaft speed: frequency-controlled, approx. 50–5,100 rpm Reverse operation / mixing mode: approx. 50–500 rpm Bowl speed: frequency-controlled, approx. 7–20 rpm Control: PLC Operation: modern touch panel Voltage: 400 V / 50 Hz After the factory overhaul is completed, the machine will undergo a comprehensive inspection and a FAT (Factory Acceptance Test). Advantages of the KILIA Factory Overhaul You will receive the extremely robust basic construction of a proven KILIA cutter, combined with modern drive, control, and automation technology. Proven KILIA quality. Modern technology. Ready for many more years of production. Warranty We provide a 6-month warranty on the factory-overhauled machine, in accordance with our terms and conditions. The knife shaft bearing is excluded from this warranty. Inspection and machine acceptance at our factory can be arranged.

Condition: used, Year of construction: 1962, pressure 025 t throat 200 mm Ijdezrprqopfx Am Hjtl stroke 8 - 80 mm no. of strokes 180 /min distance table/ram, max. stroke up, adjustment up 330 mm table surface area 550 x 400 mm hole in the table 60 mm table height over floor 800 mm passage to the back 200 mm ram surface 355 x 220 mm ram adjustment 50 mm power requirement 2,7 kW weight 2,5 t dimensions (WxDxH) 1,2 x 1,8 x 2,4 m

Condition: used, mileage: 245,040 km, power: 320 kW (435.08 HP), first registration: 07/2011, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: orange, gearing type: semi-automatic, emission class: euro4, total width: 2,550 mm, total height: 4,000 mm, Equipment: air conditioning, electronic stability program (ESP), ++ BUY ++ BUY ++ BUY ++ BUY ++ BUY ++ Internal Number: #660 Wiedemann Water Recycling Unit Super 2000 Mercedes Benz ACTROS 2544 6x2 Superstructure * Wiedemann enviro tec, stainless steel 1.4301 * Super 2000, 10.0 / 6.0 * Approx. 16,000 liters total volume (air), of which 10,000 liters for sludge / 6,000 liters for rinsing water * Discharge: Tipper * IFM CAN control system with 5" display and wireless remote control * Outrigger arm at the end of the tank, centrally mounted at the top, telescoping to a working length of 3,900 mm, with suction and rinsing hose guide High-pressure system * URACA P3-45 G65 * Approx. 408 l/min at 175 bar * Rinsing hose 1: 160 m DN32, reel hydraulically extended for 180 m DN32, mounted on the outrigger * Rinsing hose 2: approx. 40 m DN13 Vacuum system * KW 3000 liquid ring pump * Approx. 3,000 m³/h * Liquid ring pump * Suction hose approx. 25 m DN125, reel on the tank, dirty water can be discharged via the suction hose Special features * Equipment cabinet on both sides with two flaps * Soundproofing cladding in front of the pumps on the left and right * Tool box 1x steel * Advertising panels: Yes * Rotating beacon lights: Cab 2x, superstructure 1x * Garbage bin / scrap box, vice available * Reversing camera: Yes Technical data * Mercedes Benz Actros 2544 L * 6x2 Isdezz Uz Nspfx Am Hjtl * EURO V * 440 hp / 320 kW * Semi-automatic * Fuel tank: approx. 400 l * Color: orange/blue * Permissible total weight: 26,000 kg * Unladen weight: 18,750 kg * Length x width x height: 10.80 m x 2.55 m x 4.00 m * First registration: 11.07.2011 * FIN: WDB9302011L534153 For further detailed information and/or images, please contact us directly. A wide selection of other vehicles for PURCHASE or RENT can be found at: Subject to changes, prior sale and errors. The buyer is obliged to independently verify the condition and equipment of the goods. The sale takes place exclusively according to our general terms and conditions and with the exclusion of any warranty.

Condition: excellent (used), Perlmühle Drais PM 25 RL-V Previously used, protected design Grinding container, 26 liters Stirring motor power: 24 kW with feed pump Itodpfx Ask D Agtsm Hol In very good condition, directly from production!!!

Condition: good (used), Year of construction: 2010, This is your *KAESER SK 25 compressor + 500L tank + TBH 23 dryer*. Itodpfxez Ab A Ao Am Hsl - *KAESER SK 25 - SIGMA screw compressor* - *Part No. 101958.0 / Serial 1562* - *Hour meter:* - Photo 1: *20,704 total hours* - This is low for a KAESER; they typically run for 60,000 hours. - Photo 2: *5,224 hours under load* (1) - This represents the core operating time of the machine. - Photo 3: *314 hours* - Hours under pressure (2). - *Displayed pressure 0.0 bar = normal shutdown, no fault.* - *Complete set:* - SK25 compressor (15 kW - approximately 2 m³/min at 8 bar) - Vertical tank X. PAUCHARD 500L galvanized (with pressure gauge) - KAESER TBH 23 KRYOSEC refrigeration dryer.

Condition: used, Year of construction: 2005, input voltage: 400 V, Degen TAM 25/600 tool grinding machine, manufactured in 2005, with a Norton grinding wheel and manual longitudinal and transverse adjustment via handwheels and levers. Coolant supply via a flexible hose. Includes various extra grinding wheels. Technical specifications: - Year of manufacture: 2005 - Grinding wheel: Norton - Design: floor-standing machine cabinet with grinding unit - Adjustment: manual, longitudinal and transverse - Coolant supply: flexible hose Itedpfezzn Sujx Am Hsl - Connection: 400 V, red CEE plug Included: various grinding wheels. The machine is sold in its current condition (used, from a bankruptcy sale, Apeldoorn, Netherlands). Disassembly, loading, and transport are the responsibility of the buyer; the buyer is responsible for providing the necessary tools, lifting/loading equipment, and packaging. Inspection is possible by appointment.

Condition: refurbished (used), Used, complete reconditioned, 1 year warranty, plate format 1200 x 1200 mm, 40 - 125 plates, open or closed spout, 20, 25 or 30 mm cake thickness, pressure max. 15 bar, capacity 1200 - 4500 liters, filter surface 85 - 350 m², dimensions 7000 - 13.500 x 1800 x 2400 mm, weight 10.000 - 28.000 kg, autom. plate transport, engine hydraulics, with or without filter cloths Iodpsfbbqhefx Am Hetl

Condition: good (used), Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Cylinder: Ø 180 mm -Piston rod: Ø 125 mm -Pipe outer diameter: 210 mm Itjdpfx Ajcgtyqjm Hjl -Stroke: approx. 350 mm -Pressure force at 180 bar: approx. 45 tons -Total length when retracted: 860 mm -Hole diameter: Ø 65 mm -Ideal for building a hydraulic press -Number: 2 cylinders available -Price: per piece -Dimensions: 200/280/H860 mm -Weight: 150 kg/piece

Condition: excellent (used), Year of construction: 1987, functionality: fully functional, power: 8.75 kW (11.90 HP), pressing force: 25 t, stroke length: 500 mm, operating speed: 100 mm/s, reverse speed: 450 mm/s, table width: 630 mm, table length: 500 mm, ram plate width: 450 mm, ram plate length: 360 mm, clearance between the columns: 800 mm, total length: 16,500 mm, total width: 10,500 mm, total height: 27,500 mm, overall weight: 2,200 kg, die cushion stroke: 160 mm, Hydraulic press PYE 25 S1M with ejector. Year of manufacture: 1987. Manufacturer: VEB Wema Zeulenroda (Germany). Specifications: Maximum pressing force: 25 tons. Itodpetzwxdjfx Am Hsl Working pressure: 16 MPa. Upper table: 450 x 360 mm. Lower table: 630 x 500 mm. Clearance: 800 mm. Cylinder stroke: 500 mm. Downward speed: 100 mm/sec. Upward speed: 450 mm/sec. Lower ejector force: 10 tons. Lower ejector stroke: 160 mm. Power requirement: 8.75 kW. Weight: 2200 kg. Height: 2750 mm, Length: 1650 mm, Width: 1050 mm. Very good technical condition. The machine has undergone a complete overhaul. Machine can be inspected and tested under power.

Condition: good (used), Gas metal arc welding machine, arc welding system, MIG/MAG welding system, welding machine -Manufacturer: Messer Griesheim, MIG/MAG gas-shielded welding machine Itodpfxjz A R R Te Am Hol -Type: Euromag 25-2 -Max. welding power: 250 A -Wire feed: 4-roll drive, separate, mobile -Accessories: Hose assembly, ground cable (see photos) -Dimensions: 970/490/H890 mm -Weight: 168 kg

Condition: used, Year of construction: 2015, operating hours: 14,014 h, Type of fuel: Electric Colour: Grey Empty weight: 5.200 kg Dimensions (LxBxH): 232 x 119 x 271 cm Lifting capacity: 2.500 kg Lift height: 602 cm Clearance lift height: 198 cm Fork dimensions: 1.300 x 1.000 mm - Year: 2015 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 516345F00709 - Operating hours: 14014 - Lifting capacity: 2500kg - Lifting height: 6018mm - Overhead clearance: 2710mm - Free lift: 1980mm - Fork length: 1300mm - Maximum fork width: 1000mm - Minimum fork width: 240mm - Number of wheels: 4 Wheels - Attachment: 3rd valve to fork carriage - Options: Non-marking tires, Full cabin, Free-lift, Work lights - Mast: Triplex - Drive: Electric - Battery information: - └ Capacity: 620Ah - └ Battery voltage: 80V - └ Battery test result: 93% - └ Tray length [mm]: 1030 - └ Tray width [mm]: 710 Iodpsz Ayf Njfx Am Hstl - └ Tray height [mm]: 785 - Transport dimensions: 2328mm x 1199mm x 2710mm (l x w x h) - Transport weight [kg]: 5200kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Koen van Lent

Condition: used, Year of construction: 1979, functionality: fully functional, working width: 250 mm, planing height: 160 mm, spindle diameter: 50 mm, planing width: 250 mm, working height: 160 mm, overall weight: 10,000 kg, power of feed motor: 30,000 W, spindle speed (max.): 6,000 rpm, height adjustment type: mechanical, planer shaft diameter: 50 mm, type of input current: three-phase, table length: 1,000 mm, number of spindles: 9, input frequency: 50 Hz, Weinig Hydromat 25 9 spindles, Isdeqvml Rjpfx Am Hstl Working width: 250 mm, working height: 140 mm, spindle diameter: 50 mm, feed: 30 kW / 6 - 65 m/min, Spindle arrangement: 1-bottom (11 kW) - with hydraulic clamping 2- Right (7.5 kW) 3-left (11 kW) Jytnaq 4-Left (7.5 kW) 5-Right (7.5 kW) 6-Top (7.5 kW) - with hydraulic clamping 7-Top (15 kW) - with hydraulic clamping and straight jointer 8-Bottom (11 kW) - with hydraulic clamping and straight jointer 9-bottom (11 kW) - with hydraulic clamping and straight jointer 8 driven rollers in the table

Condition: used, mileage: 311,000 km, power: 213 kW (289.60 HP), first registration: 10/2017, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: white, gearing type: automatic, emission class: euro6, loading space length: 8,650 mm, loading space width: 2,500 mm, loading space height: 2,500 mm, Year of construction: 2017, Equipment: ABS, air conditioning, Manufacturer MAN Model TGM 18.290 4x2 Carrier Supra 1250 nordic Year 2017 Condition Good Serial Number WMAN28ZZ6JY365837 Ref. nr. 198181 Reg. date: 25-10-2017 Last seen: 27-01-2026 Hk: 290 Km: 311000 Gearbox: Automatic Eurotype: 6 Diesel tank: 1 Tank liter: 400 Air conditioning: ? Disc brake: ? ABS: ? Engine brake: ? Tire Size: 315/70R22,5 Cover% left 50 - 80% Front suspension: Air Suspension rear: Air Isdpfx Aszyd U Asm Hetl Total weight: 18000 kg. Net weight: 10050 kg. Load capacity 7950 kg. Inside length: 8650 mm. Internal width: 2500 mm. Interior height: 2500 mm. Lift Brand: Zepro Lift capacity: 2500 kg. Remote control: ? Refrigerator brand: Carrier Supra 1250 Nordic Refrigerator year: 2017 Engine hours 5451

Condition: used, Year of construction: 1999, machine/vehicle number: 211237, functionality: unexamined, power: 11 kW (14.96 HP), input voltage: 400 V, input current: 63 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 127 t, oil tank capacity: 250 l, Equipment: CE marking, safety light barrier, Used machine, includes many tools. Itsdpfjzqux Tsx Am Hsl Cannot be tested. Collection only.

Condition: used, CNC Press Brake BEYELER - BYSTRONIC Type PR 8 (2500 kN x 3100 mm) Iedsya Iaqopfx Am Hotl Press brake with 6-axis backgauge and CYBELEC control Serial No.: Year of manufacture: 2001 Pressing force: 250 tons Working length: 3100 mm Stroke: 365 mm Throat depth: 410 mm Clearance between side frames: 2750 mm Table width: 100 mm, 200 mm with table extension Table height above floor: 840 mm Backgauge X-axis: 620 mm travel Backgauge R-axis: 240 mm Approach speed: 200 mm/s Working speed: 1-10 mm/s Y rapid traverse: 200 mm/s Y working traverse: 1-10 mm/s Y return: 135 mm/s Oil capacity: approx. 400 liters Motor power: 18.5 kW Connected load: approx. 25 kW Power supply: 400 Volt, 50 Hz, 50 Amp. - 8 axis CNC control Cybelec DNC 1200 PS/A, X1 + X2 / R1 + R2 / Z1 + Z2 - 2 freely programmable backgauge fingers, laterally movable (Z1+Z2) - Backgauge (X-axis 620 mm) with 3 gauging points up to max. 1080 mm - Ram with servo valves and measuring system Y1 and Y2 - FIESSLER AKAS safety light barrier - Operation via electric foot switch and/or two-hand control panel - Hydraulic upper tool clamping (TRUMPF system) with 20 mm clamping slot - Tool holder for lower tool, height 160 mm x width 60 mm, with holder slot 14 x 23 mm - Tool system TRUMPF, without tools Space requirement (L x W x H): 0 x 2500 x 3400 mm Machine transport height: 3360 mm Weight: 17,000 kg Good condition

Condition: good (used), Year of construction: 1997, functionality: fully functional, saw blade diameter: 500 mm, For Sale – Elumatec SA 142/25 Aluminum Saw (1997) Machine: Elumatec SA 142/25 Type: Automatic aluminum cutting saw (suitable for aluminum and light-metal profiles) Year: 1997 🔧 Technical Specifications Saw blade diameter: 500 mm Blade rotation speed: 2800 rpm Feed length per cycle: 5–600 mm Cutting angle: 90°, with possible bevel/mitre capability depending on machine configuration Power supply: 230/400 V, 3-phase, 50 Hz Air supply required: 7 bar Suitable materials: Aluminum profiles, thin-wall light-metal profiles, window/door profiles and general industrial aluminum cutting ✅ Features & Benefits Reliable industrial saw designed for high-volume aluminum profile cutting Strong and stable construction with a 500 mm blade for fast, clean cuts Step-feed system (5–600 mm) enables efficient serial production and flexible cutting lengths Isdpfxexz R Ixs Am Hjtl Ideal for window & door manufacturers, metal workshops, façade builders, and any company working with aluminum extrusions Simple, durable design – easy to maintain, spare parts widely available 📌 Notes Requires 3-phase electrical connection and compressed air (7 bar) Angle-cutting functionality should be verified depending on the machine’s configuration Machine condition and accessories can be confirmed upon inspection. Chip vacuum is included in this sale! Please verify the accuracy of the machine specifications with the seller.

Condition: good (used), Year of construction: 2008, Offer 26289 Approximate technical specifications: Iodpfxszvnb Se Am Hjtl - CNC flame cutting machine with 2 torches, as shown in the picture - 2 torches with adjustable height and inclination - Track gauge approx. 4.2 m - Track length approx. 7.5 m - Track height approx. 0.5 m - Supporting table - Space requirement approx. L 8 x W 7.5 x H 2.3 m - Weight approx. 3 tons - Without supporting table!

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2013, operating hours: 20,315 h, load capacity: 2,500 kg, lifting height: 4,800 mm, free lift: 1,450 mm, fuel type: diesel, mast type: triplex, construction height: 2,230 mm, motor manufacturer: VW, tire condition: 40 %, front tire type: superelastic tires (black), front tire size: 27 x 10 - 12, rear tire type: superelastic tires (black), rear tire size: 23 x 9 - 10, overall weight: 4,505 kg, total height: 2,230 mm, total length: 2,650 mm, total width: 1,300 mm, fuel: diesel, LINDE H 25 D-02 / 600 – Diesel forklifts TECHNICAL DATA Lifting capacity: 2.500 kg Lifting height: 4.800 mm Closed height: 2.230 mm Free lift: 1.450 mm Mast: Triplex (3F480) Fork carriage: FEM 2 A Drive: 4-Zyl.-Diesel Engine: VW Tyres: Superelastik SE 27 x 10 - 12 (40%) / 23 x 9 - 10 (20%) Service weight: 4.505 kg Length: 2.650 mm Width: 1.300 mm Year of manufacture: 2013 Operating hours: 20.315 h Condition: ready to drive Iedpfx Aoz Ap D Ijm Hetl EQUIPMENT 3rd valve, Front work lights, Overhead guard cover, Front windscreen Internal no.: 1102818 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Year of construction: 2022, condition: used, - Model: Classic Line 60 KK - Year of manufacture: 2022 - Load capacity: 400 kg Isdpfxjzrvkao Am Hjtl - Collection capacity: 65 liters - Dimensions: 785 x 639 x 281 mm - With grating - Steel construction - Color: blue (powder-coated) - Weight: 37 kg

Year of construction: 2014, condition: excellent (used), Vötsch VCS³ 7034-5 Climate Testing Chamber / Temperature and Humidity Testing Chamber Manufacturer: Vötsch Industrietechnik GmbH Type: VCS³ 7034-5 Machine Type: Climate Testing Chamber / Temperature and Humidity Testing Chamber Test Chamber Volume: approx. 335 liters For sale is a used Vötsch VCS³ 7034-5 climate testing chamber with temperature and humidity control, programmable touch panel control, and water-cooled design. The system is suitable for professional temperature and climate testing, humidity testing, environmental simulations, material testing, electronics and component testing, as well as for research, development, and quality assurance. Technical Data: Manufacturer: Vötsch Industrietechnik GmbH Temperature Range: -70 °C to +180 °C Humidity Control: included Water-cooled design Test Chamber Volume: approx. 335 liters Power Connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated Power: 9 kW Rated Current: 20 A Refrigerant 1: R404A, 2.50 kg Refrigerant 2: R23, 0.75 kg Equipment: Programmable touch panel control Temperature control Humidity control Water-cooled design Stainless steel interior Isdpfx Aez Akcfsm Hstl Large viewing window Test chamber lighting Separate digital temperature and humidity display Several stainless steel inserts in the test chamber Program mode and manual mode Test specimen port Ø 125 mm Additional test specimen port Ø 50 mm Front main switch Electrical connection with approx. 3.5 m connection cable Connection for condensate drain / overflow Cooling water connection Connection for demineralized water Compressed air connection Dimensions: External Dimensions (W × D × H): approx. 872 × 1,758 × 1,800 mm Internal Dimensions (W × D × H): approx. 580 × 765 × 750 mm Weight: approx. 585 kg Transport Data: Dimensions (W × D × H): approx. 872 × 1,758 × 1,800 mm Transport Weight: approx. 585 kg Condition: Used Optical condition as shown in the pictures. Scope of Delivery: Vötsch VCS³ 7034-5 climate testing chamber Programmable touch panel Stainless steel inserts as shown in the pictures Accessories as shown in the pictures Availability: by arrangement. Scope of delivery as shown in the pictures. Subject to changes, errors and prior sale.

Condition: used, Year of construction: 2016, operating hours: 15,000 h, functionality: fully functional, machine/vehicle number: kom 4892, Set of dryer equipment, including: Loading bunker Oversize vibrating screen Chain conveyor to dryer Belt dryer Itjdpfxjxa Drho Am Hjl Chain conveyors from dryer Vibration separator