Used Graphite Seals for sale (2,921)

Condition: new, Year of construction: 2026, Bitumen Sprayer+Crack Sealer 2in1/ BM Combo (Without trailer) Melt and apply asphalt crack filler machine Combo has a wide range of applications. BCM-120 is professional equipment that has proven itself in the road construction industry, maintenance or repair of road surfaces. Trailed asphalt distributor ensures accurate and efficient spreading of bitumen emulsion. An upgraded bitumen machine BM-Combo runs on diesel engine with hydraulic pump drive and heats emulsion from diesel burner. The bitumen emulsion sprayer is equipped with a separate tank. Another one is installed to be filled with mastic. Materials are mixed manually. A crack sealer has an automatic control of mastic heating and the purging system. GENERAL 1. Diesel engine – 14-18 hp 2. Compressor receiver – 25L 3. Pumps drive – hydraulic CRACK SEALER 1. Bitumen tank – 120L 2. Bitumen pump – up to 10L/min, 5 bar 3. Hand spraying rod + hose 2m (not heated) 4. Manual mixing 5. Bitumen heating – diesel/gas burner 6. Heating control – automatic 7. Blowing system BITUMEN EMULSION SPRAYER 1. Emulsion tank – 1000L 2. Pump – 36L/min, 2 bar Lredevptd Njpfx Ab Aju 3. Emulsion heating – diesel/gas burner 4. Hand spraying rod + hose 4m 5. Spraying bar 7 nozzles 6. Pipe line cleaning system and spray bar blowing Advantages -You get a bitumen emulsion sprayer and a crack sealer in one machine. -An economical diesel engine comes as standard. -You can heat the mixture from gas or electricity. -We offer the price from the manufacture and unsurpassed service.

Condition: used, Year of construction: 2016, Overview Lodpfx Ajz Sr Uyeb Aeru This Speidel Braumeister 200 L is a compact all-in-one brewhouse: mashing, lautering and wort boiling take place in a single vessel. The unit was bought new from Speidel in 2016 and has been used exclusively for craft ales (top fermentation), with about 280 brews. It was in production until August 2026 and is now dismantled and stored in a climate-controlled warehouse. The malt pipe sits inside the kettle; the recirculation pump drives the wort through the grain bed, and the integrated lifting device raises the malt pipe for lautering. The automatic controller runs the brewing programme. Technical data - Manufacturer: Speidel - Model: Braumeister 200 L - Year of manufacture: 2016 - Nominal brew volume: 200 L - Power supply: 400 V, three-phase, 50 Hz - Power: 9.3 kW; heating 3 x 3,000 W - Dimensions: approx. 136 x 90 x 208 cm including lifting device - Weight: approx. 150 kg - Control: automatic - Utilities: no cooling water and no permanent drain connection needed in normal operation Equipment - Stainless steel lid - Malt pipe with perforated filter plates, fixing bar and clamp - Lifting device for the malt pipe - Recirculation pump - Automatic controller - Hoses, external connections, cable and three-phase plug - Printed manual; invoice, CE certificates and original documentation available Condition Used, in excellent condition: no known faults, leaks or pending repairs. Pumps, heating elements, seals and controller are original. Maintained quarterly according to the manual; routine cleaning with warm water and alkaline detergent, with caustic soda and nitric acid every five brews. The unit sits on its own frame and can be loaded without a pallet. A second, identical unit is available as a separate offer. Availability Available immediately. Location: Spain. Viewing is possible by appointment.

Condition: used, Year of construction: 2004, machine/vehicle number: M284, Used filling monoblock OCIM for oil tins 1000 bph The used OCIM filling monoblock for oil tins 1000 bph efficiently bottles oil in metal containers. Notably, OCIM manufactured this plant in 2004, ensuring high operational reliability with its robust mechanical structure. Moreover, its optimized filling system delivers precision and continuity in the production process. Technical specifications of teh Filling monoblock OCIM for oil Tins The OCIM monoblock model 8.5 fills 1000 tins par hour, thus maintaining efficient and stable production. Additionally, the system applies a gravity or light vacuum filling method, effectively handling viscous liquids such as oil. Furthermore, 8 fixed valves distribute uniform doses into each container. The machine processes different oil tin formats, specifically: 1-liter oval-shaped tin 3- and 5-liter rectangular tins Consequently, with its adaptable configuration, the OCIM monoblock quickly adjusts to various formats, thereby enhancing production line efficiency. Capping system and safety features Lodpj Adt T Tjfx Ab Ajru For sealing containers, the monoblock utilizes a system with 1 capping head, specifically designed for pull-out spout caps. In particular, the machine supports a 38.5 mm cap diameter, a standard in the edible oil bottling industry. Additionally, the machine incorporates safety devices that protect operators and ensure compliance with industrial regulations. As a result, these systems reduce operational errors and maintain reliable long-term performance. Current state and operational configuration of the Filling monoblock OCIM for oil Tins Currently, the used OCIM filling monoblock for oil tins 1000 bph operates continuously in production, meaning it functions without significant interruptions. Furthermore, the system’s clockwise rotation integrates smoothly into existing lines without requiring complex mechanical adaptations. Given these advantages, this machine provides an optimal solution for companies seeking a reliable, precise, and high-performance bottling plant for oil in metal containers. Moreover, with its modular design and compatibility with various formats, the OCIM monoblock maximizes production efficiency and minimizes machine downtime, which are crucial factors in the industrial bottling sector. Consequently, businesses can ensure continuous and cost-effective operations. Similarly, its adaptability makes it a viable choice for various production demands. In conclusion, this monoblock stands out as a dependable asset in the bottling industry.

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: D 2402263, overall weight: 176 kg, total length: 930 mm, total width: 550 mm, total height: 450 mm, volume flow: 129 m³/h, operating pressure: 1,500 bar, power: 6.7 kW (9.11 HP), input frequency: 50 Hz, rotational speed (max.): 1,740 rpm, Dry-running positive displacement pump for low pressure, from Becker, type KDT 3.140/0-400, built in 2009. The rotary vane compressor uses self-lubricating vanes made of a graphite composite material and requires only minimal maintenance and no oil change. Ledpstp Tklofx Ab Aeru For further details see type plates / files. Packaging and loading included.

Condition: good (used), Year of construction: 2017, machine/vehicle number: HD 11610556, pressure: 350 bar, overall weight: 850 kg, power: 30 kW (40.79 HP), Equipment: type plate available, Used high-pressure plunger pump with integrated gearbox and special crosshead seal. Designed for low-viscosity media. Main areas of application in industry and services: - Sewer cleaning - Descaling - Industrial high-pressure cleaning - Special applications Technical specifications: Type: KD716-GK Year of construction: 2017 30kW Pressure: 350 bar 1500 1/min 47 l/min With Elektra electric motor 14BG 220-4AA60-Z 225S 400 / 690V 68 / 39.5A 50Hz 37kW 1475 1/min Condition: used (see pictures and type plates) Lrjdpfx Aotuqlxjb Aju Scope of delivery: 1 PUmpe

Condition: excellent (used), Wide Belt Sander for Calibration and Fine Sanding SCM Lodpfx Aboxqggcs Asru Model RCS 1st Unit: Calibration Roller, Steel 2nd Unit: Combination Unit (Roller 60 Shore, sanding pad with 2 inserts – hard, soft) Working width: 920 mm Abrasive belt dimensions: 930 x 1,525 mm Main motor power: 11.0 kW, 400 V, 50 Hz Feed motor power: 0.37 kW, 400 V, 50 Hz 2 feed speeds Electromotive table height adjustment Main switch lockable 2 x emergency stop Table extension with 2 rollers, front and rear Sanding pad inserts fitted with new graphite cloth Including as-new sanding belts All documentation included Note for used machinery: • Specifications, data, and prior sale are subject to change. • Prices stated are ex works – free loaded! • The machine has been cleaned and functionality tested. • All machines are sold as seen without any rights to warranty. Buyers are welcome to inspect the machines on site. • Special agreements are only valid in written form. (We only respond to inquiries that include your address and telephone number!)

Condition: excellent (used), MOSCA RO-M-P2 – automatic PP strapping machine For sale: a high-quality, automatic polypropylene (PP) strapping machine from the renowned German manufacturer, MOSCA. This device is designed for the quick and efficient strapping of cartons, packages, and other products prepared for transport and storage. Ljdpfjz Sncnox Ab Ajru The machine is ideally suited for use in warehouses, logistics centers, manufacturing companies, online stores, and packaging facilities. Technical specifications: Manufacturer: MOSCA Maschinenfabrik Gerd Mosca GmbH Model: RO-M-P2 Year of manufacture: 2000 Serial number: 58664 Country of manufacture: Germany Power supply: 230 V Frequency: 50 Hz Power: 0.5 kW Rated current: 2.4 A Control voltage: 24 V DC Equipment: Automatic PP strapping Strap tension adjustment Automatic strap sealing Control panel with indicators Main switch Large stainless steel worktable Mobile design with wheels Robust industrial construction Condition: Used machine. Technically functional. Good visual condition, with normal signs of wear and tear from use. Sold in the exact condition as shown in the photos.

Condition: ready for operation (used), Tray dimensions X/Y 1: 250mm/180mm, tray dimensions X/Y 2: 357mm/265mm, max. film width: 400mm, packaging output: approx. 6–8 cycles/min. Machine dimensions X/Y/Z: approx. 5000mm/900mm/2000mm, weight: approx. 800kg. Documentation available. An on-site inspection is possible. Lredpfjxtfgaex Ab Aou

Condition: ready for operation (used), Year of construction: 2012, Two semi-automatic angle welding machines Minipack with L-seal for shrink film are available. Packaging capacity: 900 packages/min, sealing bar dimensions X/Y: 840mm/600mm, max. film roll diameter: 300mm, max. film roll width: 800mm, working table height: 930mm, machine dimensions X/Y/Z: approx. 2100mm/1000mm/1250mm, weight: approx. 250kg. Documentation available. An on-site inspection is possible. Sale of individual units is possible. Lrsdpjw N Shdefx Ab Aju

Condition: used, empty load weight: 8,807 kg, maximum load weight: 30,193 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 06/2025, next inspection (TÜV): 06/2026, loading space length: 13,403 mm, loading space width: 2,490 mm, loading space height: 2,650 mm, loading space volume: 88 m³, suspension: air, tire size: 385/65 R22,5, color: white, Year of construction: 2025, Equipment: ABS, Unladen weight: 8807 kg, permissible total weight: 39000 kg, cargo space (L W H): 13,403 mm x 2,490 mm x 2,650 mm, tire size: 385/65 R22.5, cargo space volume: 88 m³, 1st axle: , 2nd axle: , 3rd axle: , air suspension, underrun protection, lift axle at the front, pallet box, electronic braking system EBS, spare wheel holder (2x), bolted chassis, temperature recorder, double-deck EURO pallet with beams, connection plug 1x15 and 2x7-pole, anti-splash, international customs seal, telematics system. You can find our entire vehicle range at . Would you like financing? With our value-added services, we offer you individual financing options, full-service and telematics services. We will be happy to advise you. Lrjdpfx Abj Adv Elj Asu

Condition: used, Year of construction: 2017, ++ without ST package ++ can be purchased separately CNC-CONTROLLED MACHINING CENTER KEY FEATURES "PRO-SPACE" SAFETY DEVICES: SAFE AND COMPACT "HE" TABLE - FOCUS: EFFICIENCY AND SAVINGS TECHNICAL DATA AXES Pratix S22 Working area in X-Y-Z axis * mm 22-43 = 4286-2155-150 Travel X-Y-Z axes mm 22-43 = 4970-2585-250 Travel speed of X-Y axes m/min 35 WORK TABLE Type Multifunction table made of aluminum Stops for "A" working area pcs 4 Vacuum pump (Opt.) m³/h 90/108 - 250/300 DRILLING UNIT Vertical spindles No. – rpm 7 (5X-3Y) 6,000 – 12 (8X-5Y) 6000 Horizontal spindles (Opt.) No. – rpm 4 (2X-2Y) 6,000 – 6 (4X-2Y) 6000 Integrated saw blade in X (Opt.) Ø mm – rpm 120 – 7500 Ledpjz Ebzhsfx Ab Asru Motor power kW (HP) 2.2 (3) ELECTROSPINDLE Motor power Std. (S6) kW (HP) 6.6 (9) – 9.5 (13) Max. speed rpm 24000 Side tool changer 13 positions INSTALLATION Installed power kVA 23÷28,5 Compressed air requirement l/min 400 Extraction air requirement m³/h 5300 Extraction air speed m/sec 30 Extraction nozzle diameter (electrospindle + drilling unit + kit) mm 250 Machine weight kg 22-43 = 3200 * X Distance between stops - Y Max. panel width - Z Workpiece passage Only electrospindle or electrospindle + drilling unit: diameter 200 mm; extraction air requirement 3400 m³/h In conjunction with the slider for panel output, the extraction nozzle diameter is always = 250 mm GENERAL FEATURES CNC-controlled machining center for processing panel materials. Self-supporting structure and work table Box structure made of cold-rolled steel, consisting of rectangular sections that are welded together; multifunction work table made of aluminum with a single working area. Holes in a 120 mm grid for vacuum connection, can be easily removed using a magnetic device (patented system). The entire surface is grooved at a distance of 20 mm so that the workpieces can be clamped using rubber seals, MODULSET or suction cups. Automatically retractable reference stops that ensure accurate positioning of the workpieces to be processed. Moving gantry This is a gantry structure made of cold-rolled steel in a box design, consisting of right-angled sections. The working units are installed on the gantry. Working unit consisting of a drilling head with vertical spindles, horizontal spindles, an integrated grooving and sawing unit and an SCM electrospindle with a tool quick-change system type HSK63F. Travel paths of the gantry and the unit carrier The movement in the X, Y and Z axis takes place on linear prismatic recirculating ball guides with the help of pre-tensioned Movement transmission of the X and Y axes (moving column and carriage) takes place via a reduction gearbox with rack and pinion drive and oblique The movement of the unit carrier in the Z direction takes place via pre-tensioned Positioning of the working units and control of the machine functions takes place via "Brushless" three-phase servomotors and digital CONTROL The control unit consists of a numerical control for milling and drilling machines and a user interface with remote control with a 7" touchscreen color screen. The Xilog Maestro machine operating interface offers optimal communication between operator and the machine for all programming functions.

Condition: refurbished (used), Year of construction: 2015, operating hours: 33,630 h, ASCO A120P Dry Ice Pelletizer – Refurbished We have various new parts in stock for Cold Jet machines. A robust and reliable industrial dry ice machine, suitable for the production of high-quality dry ice pellets for cleaning, cooling, and transport. Specifications Brand: ASCO Type: A120P Operating hours: 33,630 hours Ready for immediate use Major maintenance performed (2024) The machine underwent extensive maintenance by ASCO Germany in late 2024. During this process, several critical wear parts were replaced, and the press unit was refurbished. Among the parts replaced: ✔ New press chamber kit ✔ New piston ✔ New guide bushings ✔ New sintered bushing ✔ New hydraulic filter ✔ New solenoid valves ✔ New pressure regulator (latest version) ✔ Hydraulic valve replaced ✔ Various springs ✔ New seals ✔ Various fasteners Ljdezquixepfx Ab Ajru Service documentation available The machine comes with the original documents, including: Original ASCO service report Test results after maintenance This confirms that extensive refurbishment work was carried out on the press chamber and hydraulic components. Worldwide shipping. Cold Jet dry ice machine for sale, dry ice machine for sale, dry ice blasting machine for sale, dry ice blasting machine to buy, dry ice blaster for sale, dry ice blasting machine for sale, industrial dry ice blaster for sale, CO2 cleaning machine for sale, Cold Jet Aero 30 for sale, Cold Jet Aero 40FP for sale, Cold Jet Aero 40HP for sale, Cold Jet Aero 75 for sale, Cold Jet Aero 75 DX for sale, Cold Jet Aero75 DX, Cold Jet 75DX, used Cold Jet machine, second-hand dry ice blasting machine, Cold Jet Aero series, Cold Jet i3 MicroClean, Cold Jet E-CO2, Cold Jet SDI Select 60, Cold Jet IceRocket, Cold Jet Elite 20, Cold Jet Dry Icepress, Cold Jet pelletizer, dry ice blaster, dry ice cleaning machine, industrial dry ice cleaning system, pellet dry ice blaster, dry ice blasting equipment, cryogenic cleaning machine, CO2 blasting machine, carbon dioxide blaster, industrial cleaning, machine cleaning, maintenance cleaning, production line cleaning, mold cleaning without disassembly, dry ice paint removal, dry ice coating removal, rust removal, fire and soot damage cleaning, electrical cabinet cleaning, food industry cleaning, automotive cleaning, printing press cleaning, dry ice blaster 20 bar, high-pressure dry ice blaster, non-abrasive cleaning machine, refurbished dry ice machine, 20 ft blasting hose, dry ice blasting gun, venturi nozzle, Kärcher Ice Blaster, Kärcher IB 7/40, Kärcher IB 15/120, ASCO Jet, Cryoblaster, ICS Dry Ice, Nozzitec, Triventek, Cryonomic, Südstrahl, White Lion dry ice blaster, ICEsonic dry ice blaster, dry ice blasting machine Netherlands, dry ice machine Noordwijkerhout, industrial cleaning equipment Europe, export dry ice machine, DrDryice

Condition: good (used), Italdibipack Swing 4255 Shrink wrapping machine The machine is in full working order, ready for production, and in very good condition. The photos show the actual product being sold. Made in Italy. Description: The „Swing” series of L-sealer shrink wrapping machines is characterized by a compact design, allowing them to occupy less space than other similar systems available on the market. Technical specifications: Sealing bar dimensions: 420 × 550 mm Max. product height: 230 mm Lrjdpfez S Ulhsx Ab Aou Power supply: 230V

Condition: used, Keysight Mixed Signal Oscilloscope / Digital Storage Oscilloscope Keysight / Agilent InfiniiVision MSO-X 3034A 350 MHz Mixed Signal Oscilloscope with 4 analog channels, 16 digital channels, and 4 GSa/s sampling rate For sale is a used Mixed Signal Oscilloscope from the manufacturer Keysight Technologies / Agilent Technologies. The device is suitable for precise signal and measurement tasks in development, laboratories, service, training, research, as well as industrial electronics and quality assurance. Technical data Manufacturer: Keysight Technologies / Agilent Technologies Type: MSO-X 3034A Series: InfiniiVision Device type: Mixed Signal Oscilloscope / Digital Storage Oscilloscope Bandwidth: 350 MHz Analog channels: 4 Digital channels: 16 Max. sampling rate: 4 GSa/s Display: Color display MegaZoom technology Inputs: 4x analog BNC inputs Digital input / Logic connector USB port USB Device / USB Host Trigger Out Ext. Trigger / Calibration connector Power connection: 100 - 240 V AC 50 / 60 Hz Power consumption: max. 100 W Dimensions: approx. 381 × 204 × 142 mm Weight: approx. 4 kg Features Large color display Front-panel control buttons 4 analog channels 16 digital channels USB interfaces Trigger functions Analysis functions Measurement functions Storage and printing functions Carrying handle Accessories as shown in the pictures Application areas Electronics development Laboratory Service Troubleshooting Signal testing Printed circuit board testing Training Research and development Quality assurance Industrial electronics Scope of delivery Keysight / Agilent InfiniiVision MSO-X 3034A 3x probes as shown in the pictures Power cable Accessories as shown in the pictures Condition Used Optical condition as shown in the pictures Lodjzh I Dwopfx Ab Aoru Device can be switched on Display and operation appear to be functioning properly Test seals / stickers as shown in the pictures are present Weight: approx. 4 kg The table shown in the photos or other items not explicitly mentioned are not included in the sale. Shipping is possible. Subject to changes, errors and prior sale. We would be happy to answer any further questions by telephone.

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 12 months, type of input current: AC, product width (max.): 400 mm, input voltage: 230 V, Minipack Replay 85 EVO The Minipack Replay 85 EVO is a mobile, manual shrink wrap machine with a hood, designed for large products and larger packaging formats. – Mobile, manual shrink wrap machine with hood – Output of up to 300 packages per hour – Usable sealing bar dimensions: 840 × 590 mm – Max. product dimensions: 800 × 590 × 300 mm Lredox Tr R Uopfx Ab Aou – Max. film roll dimensions: Ø 300 × 800 mm – Working table height: 940 mm – Machine dimensions (closed): 1,950 × 1,000 × 1,180 mm – Machine dimensions (open): 1,950 × 1,000 × 1,480 mm – Machine weight (net/gross): 212 / 264 kg

Condition: used, BIO-CIRCLE Type: RWR 80L Auto KST Lredpfszgclmex Ab Asu Description: RWR 80 L KST Fully Automatic PLC Parts Washing System The RWR systems from Bio-Circle are the optimal solution for cleaning internal circuit systems without disassembly. The unit is space-saving, quiet, and very easy to operate. Due to the completely closed system, there is no odor nuisance from the cleaner or the dirty water. External dimensions: approx. 1200 x 800 x 1050 mm Power supply: 400 V 50 Hz plug 16A CEE 5p 6h Drain: 1 1/4“ outlet Technical specifications: Type of contamination: Limescale, rust (mineral), oil, grease Quantity of parts: Individual parts, small series, low quantities Component geometry: Complete components (without disassembly) Quality seal: Stainless steel, service package available Maximum filling volume: 80 L Tank material: V2A stainless steel Electrical connection: 400V / 50 Hz Heating: 4.5 kW Flow rate: 25 l/min Temperature (preset): 60 °C Total weight of the cleaning system without tank filling: 180 KG Application area: The RWR 80 L KST Fully Automatic PLC has been developed for the plastics injection molding field and can be used wherever cooling channels (circuit systems, lines) need to be cleaned. Application: Fill the RWR 80 L KST Fully Automatic PLC with Power Cleaner KST 2.0. Once the minimum fill level is reached and the system is switched on, the system will begin to heat up. During the heating period, the system can already be connected to the tool via the two hoses. The 5-stage cleaning program and the change of flow direction run automatically after the instructions displayed on the display have been confirmed. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: used, H. KÖHLER GmbH Condensation Water Test Device / Corrosion Test Cabinet H. KÖHLER HK 300 S Condensation Water Climate Test Device according to DIN 50 017 For sale is a used condensation water test device from the manufacturer H. Köhler GmbH. The device is suitable for corrosion tests, condensation water climate tests, material testing, coating testing, paint testing, and quality assurance. Technical Data Manufacturer: H. Köhler GmbH Type: HK 300 S Device Type: Condensation Water Test Device / Corrosion Test Cabinet Test Standard: DIN 50 017 Test Chamber Volume: approx. 300 liters Temperature Range: Room temperature to approx. +55 °C Humidity Range: Saturation operation possible Test Chamber Heater: 1,000 W Power Connection: 230 V / 50 Hz Connected Load: 1,000 W Compressed Air Consumption during Ventilation: approx. 3 Nm³/h Compressed Air Connection: 4.5 - 7.0 bar Deionized Water Connection: 2.5 - 4.0 bar Dimensions without Brine Tank: Width: approx. 1,200 mm Depth: approx. 600 mm Height: approx. 1,750 mm Weight: approx. 100 kg Control System HK PC102 Control LCD Display Programmable Test Cycles Condensation Water Climate according to DIN 50 017 Manual Operation / Test Operation Heater 1 / Heater 2 Alarm Display Equipment Stainless Steel Test Chamber Large Glass Door with Seal Test Chamber Thermometer Manometer Ventilation System Lodpezhadcefx Ab Aeru Compressed Air Connection Deionized Water Connection Drain Connection Stainless Steel Base with Castors Accessories as shown in the pictures Application Areas Condensation Water Testing Corrosion Testing Coating Testing Paint Testing Material Testing Automotive Industry Quality Assurance Research and Development Condition Used Optical Condition as shown in the pictures No documentation available Scope of Delivery H. Köhler HK 300 S Condensation Water Test Device Stainless Steel Base Accessories as shown in the pictures The other items visible in the pictures, which are not explicitly described, are not included in the scope of delivery. Shipping or freight shipping is possible. Subject to changes, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: reconditioned (used), Year of construction: 2018, functionality: fully functional, operating pressure: 180 bar, empty load weight: 204 kg, input voltage: 400 V, warranty duration: 6 months, temperature: 150 °C, NILFISK MH 7P-180/1260 FAX HOT-WATER PRESSURE WASHER BUILT-IN HOSE REEL The unit comes with new accessories, including a spray gun from the German brand R+M, a stainless steel lance, a steel-braided hose, and a 25° power nozzle. Year of manufacture: 2018 A durable brass pump head, equipped with new ceramic pistons and seals, ensures long-lasting, trouble-free operation. A highly efficient three-phase motor ensures stable performance, even during prolonged use. With an operating pressure of 180 bar and a flow rate of up to 1170 l/h, this machine is well-suited for heavy-duty tasks in construction, industry, logistics, and agriculture. Each unit we offer is photographed individually; you are purchasing the exact machine shown in the images. TECHNICAL SPECIFICATIONS: Supply voltage [V]: 400 ~3-phase Water flow rate [l/h]: 1170 Operating pressure [bar]: 180 Max. Heating temperature [°C]: 90–150 Connected load [kW]: 7.6 Cleaning agent tank [l]: 10+10 Hose length [m]: 20 Weight [kg]: 204 EQUIPMENT: BUILT-IN HOSE REEL NEW heavy-duty pressure gun from the German brand R+M NEW stainless steel pressure lance NEW reinforced, steel-braided high-pressure hose (20 m) NEW 25° power nozzle Lrsdpfx Aj Adtagsb Aju Water filter and GEKA claw couplings – INCLUDED FREE OF CHARGE KEY FEATURES: Open oil system – no operating time restrictions Built-in chemical tank allows for the dispensing of cleaning agents directly through the machine Highly legible and intuitive control panel Simple design with easy access to internal components, making the machine user-friendly and easy to service

Year of construction: 2011, operating hours: 10,500 h, condition: used, machine/vehicle number: ISP17, Used Inspector KRONES Linatronic K735 year 2011 The Used Inspector KRONES Linatronic K735 year 2011 offers a proven and efficient solution for quality control in high-performance bottling lines. The German manufacturer KRONES, a global leader in beverage industry automation, built this model with reliability, precision, and modular construction in mind. As a result, this inspector fits seamlessly into industrial environments that demand high accuracy and operational consistency. Electrical characteristics and technical configuration of the Used Inspector KRONES The Used Inspector KRONES Linatronic K735 year 2011 runs on a three-phase power supply at 400/230 volts, with a 50 Hz frequency and a 13-ampere current draw. Consequently, it aligns with European industrial standards and supports stable operation under demanding conditions. Furthermore, the electrical system includes integrated safety devices that protect the components from overload or malfunction. In addition, the compact and durable enclosure facilitates easy integration into existing production layouts. Year of production and machine hours KRONES produced this unit in 2011. Since then, the machine has logged 10,500 operating hours, which reflects moderate usage for equipment designed for industrial use. Compared to other models with similar functionality, this unit maintains good performance standards. Moreover, the machine structure shows minimal wear, confirming its careful maintenance. Therefore, technicians can expect reliable functionality without immediate need for major refurbishment. The machine is currently operational, specifically until Easter. Then it will be dismantled.  Supported inspection types The Used Inspector KRONES Linatronic K735 year 2011 is equipped with a comprehensive range of inspection functions to ensure the quality and integrity of each bottle. -The system performs bottom inspection to detect chips, cracks, or foreign objects at the base. -The sidewall (walls) inspection uses a rotating mirror and cameras to identify defects such as scratches, cracks, or dirt on the entire lateral surface. -The neck finish and thread inspection ensures that bottle openings are free from damage or deformation that could compromise sealing or capping. -Scuffing inspection checks for surface abrasions that indicate excessive wear. In addition, the machine employs infrared (IR) and high-frequency (HF) technology to detect residual liquid, ensuring the bottles are dry and ready for fill... Lrodpfx Abo Adyv Us Aou

Condition: reconditioned (used), functionality: fully functional, pressure: 180 bar, input voltage: 400 V, overall weight: 130 kg, temperature: 155 °C, KÄRCHER HDS SUPER M Eco HOT-WATER PRESSURE WASHER The unit comes with new accessories, including a spray gun from the German brand R+M, a stainless steel lance, a steel-reinforced high-pressure hose, and a 25° power nozzle. A durable brass pump head, equipped with new ceramic pistons and seals, ensures long-lasting, trouble-free operation. A highly efficient three-phase motor guarantees stable performance, even during prolonged use. With an operating pressure of 180 bar and a flow rate of 900 l/h, this machine is well-suited for demanding tasks in construction, industry, logistics, and agriculture. Each unit we offer is photographed individually; you are purchasing the exact machine shown in the images. Lsdpfx Abo Ady Tts Ajru TECHNICAL DATA: Supply voltage [V]: 400 (3-phase) Flow rate [l/h]: 900 Operating pressure [bar]: 180 Max. Heating temperature [°C]: 90/155 Connected load [kW]: 6.4 Cleaning agent tank [l]: 20 Hose length [m]: 10 Weight [kg]: 130 EQUIPMENT: NEW heavy-duty pressure gun from the German brand R+M NEW stainless steel pressure lance NEW reinforced, steel-braided high-pressure hose (10 m) NEW 25° power nozzle Water filter and GEKA claw couplings – INCLUDED FREE OF CHARGE KEY FEATURES: Open oil system – no operating time restrictions Built-in chemical tank allows for the dispensing of cleaning agents directly through the machine Highly legible and intuitive control panel Simple design with easy access to internal components, making the machine user-friendly and straightforward to service Tank for RM110 water-softening agent prevents corrosion and scale buildup within the heating coil and other internal piping.

Condition: ready for operation (used), Year of construction: 2017, operating hours: 1,179 h, travel distance X-axis: 550 mm, travel distance Y-axis: 340 mm, travel distance Z-axis: 355 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, table load: 500 kg, spindle speed (max.): 42,000 rpm, number of slots in tool magazine: 40, number of axes: 3, This 3-axis Exeron HSC 300/3 was manufactured in 2017. It features impressive travels of 550 x 340 x 355 mm and a clamping table size of 470 x 400 mm with a maximum load of 500 kg. The machine is equipped with a high-frequency spindle capable of speeds up to 42,000 rpm and a tool magazine with 40 positions. If you are looking to get high-quality machining capabilities, consider the Exeron HSC 300/3 vertical machining centre we have for sale. Contact us for further details. • Clamping table: 470 x 400 mm • Spindle speed: up to 42,000 rpm (StepTec high-frequency spindle) • Taper / tool interface: HSK 40-E Lredpfxo Ad Hbko Ab Aju • Usage: exclusively for machining graphite electrodes • Spindle time: 1,180 h Additional equipment • Workpiece probe: Heidenhain TS 460 + calibration mandrel • Tool measurement: integrated laser system MICRO COMPACT NT • Extraction system: Keller L-CUT-1-PM3-BE58 (graphite dust extraction) • Chip conveyor: No (machine equipped with graphite dust extraction instead)

Condition: excellent (used), pressure: 3 bar, temperature: 134 °C, type of input current: three-phase, input voltage: 400 V, usable tank capacity: 2,500 l, Used Becomix production plant consisting of main mixer RW2500 and pre-mix vessel AB1200 for mixing, dispersing, homogenizing and emulsifying on an industrial scale. Originally used for sterile skin care products. Very good condition, complete factory overhaul planned (new seals, piping, pneumatics and control, homogenizer and drives overhauled), new stainless steel platform included. MAIN MIXER RW2500 • Working volume approx. 600–2,500 L, total volume approx. 3,458 L, 316L mirror polished • 0–3 bar, vacuum to -1 bar, up to 134 °C, jacket, TÜV approved • Anchor agitator with PTFE scrapers approx. 30 kW, rotor-stator homogenizer approx. 45 kW (5–25 m/s) Lredps Ad H Iqefx Ab Aeu • Recirculation line DN100, hydraulic lid PRE-MIX VESSEL AB1200 • Working volume approx. 400–1,200 L, turbo agitator, two-zone heating, transfer line FURTHER EQUIPMENT • CIP for both vessels incl. CIP rack, CIP/SIP capable, aseptic valves • Water ring vacuum pump approx. 200 m³/h, powder suction and liquid dosing • New Siemens PLC with touch panel, recipe control, GMP documentation SERVICE • Turn-key installation and commissioning available • 12 months warranty (excluding wear parts) Inspection in Weyhe near Bremen, Germany, by appointment. Questions or more photos? Simply send us an inquiry. Offer subject to prior sale by an independent dealer, not affiliated with the manufacturer.

Condition: refurbished (used), power: 30 kW (40.79 HP), type of input current: three-phase, input voltage: 400 V, rotational speed (min.): 3,500 rpm, Used Vakumix inline homogenizer with 30 kW, horizontal design on castors – for retrofitting to existing vessels and mixing plants. For homogenizing, dispersing and emulsifying in recirculation or single pass for cosmetics, pharma, food and chemicals. EQUIPMENT • Drive power 30 kW, PLC controlled • Suction connection DN 100, discharge DN 80 • Front suction inlet DN 25 for liquids OVERHAULED • New control system Lredpfx Abjyf N Hvo Asu • New frequency converter • All seals new incl. mechanical seal DELIVERY • Delivery time approx. 4 weeks, international shipping possible Inspection in Weyhe near Bremen, Germany, by appointment. Questions or more photos? Simply send us an inquiry. Offer subject to prior sale by an independent dealer, not affiliated with the manufacturer.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Closing force: 635 kN Operating pressure: 206 bar Ledpfx Ao Ad Izxob Aeru Piston diameter: 200 mm Stroke: 140 mm Daylight height: 150/180 mm Heating plate dimensions: 250 x 300 mm Max. weight of the heating plates: 70 kg Oil tank: 100 l Rated power: 19.66 kW Heating power: 9.6 kW Vacuum motor power: 2.6 kW Light barrier, distance to the tool area: 270 mm Stroke of the vacuum cover: 140 mm Dimensions: 2,650 x 2,100 x 2,100 mm The vulcanizing press from the manufacturer PAN STONE, type S-V-65-2RT-PCD, was used by a renowned German company in the sealing technology and electromobility sector. This company is known for its high quality and innovation in sealing production. The machine was part of a production line responsible for manufacturing high-performance seals used in various industries. It was always professionally maintained and repaired, which explains its very good condition. This press offers you the opportunity to invest in a proven technology that has been used by a leading company in Germany.

Condition: reconditioned (used), pressure: 2 bar, temperature: 133 °C, power: 45 kW (61.18 HP), type of input current: three-phase, input voltage: 400 V, usable tank capacity: 125 l, rotational speed (max.): 82 rpm, rotational speed (min.): 19 rpm, Used Symex CML125 vacuum homogenizer mixer in pharma design, factory overhauled with new seals. Complete process unit for mixing, dispersing, homogenizing, emulsifying, heating, cooling and vacuum – ideal for creams, ointments, gels and pastes in pharma, cosmetics and food. Lodpeyf N H Ajfx Ab Aeru EQUIPMENT • Scraper agitator with PTFE scrapers and 2 baffles, for products up to approx. 100,000 mPas • Bottom homogenizer Symex HFDA 250, forward/reverse, double mechanical seal SiC/SiC • Large and small recirculation DN50, direct powder and liquid suction • CIP with rotating spray heads (Toftejorg), hydraulic lid lift • Liquid ring vacuum pump, temperature control unit (steam / cooling water) • Siemens S7-300 with touch panel, batch control, trend recording • Documentation incl. manuals, wiring diagrams, test certificates; PED / AD2000 SERVICE • Turn-key installation and commissioning available, optional IQ/OQ • 12 months warranty (excluding wear parts) Inspection in Weyhe near Bremen, Germany, by appointment. Questions or more photos? Simply send us an inquiry. Offer subject to prior sale by an independent dealer, not affiliated with the manufacturer.