Used Gerd Wolff Kls 550 X 700 for sale (64,427)

Condition: ready for operation (used), Year of construction: 2020, operating hours: 7,597 h, functionality: fully functional, machine/vehicle number: NL257200651, turning diameter: 366 mm, spindle speed (max.): 4,000 rpm, controller model: Mitsubishi 730UM CELOS, working length: 700 mm, number of slots in tool magazine: 12, TECHNICAL DETAILS Maximum machining length: approx. 700 mm Maximum turning diameter: 366 mm Workpiece length with tailstock: max. 728 mm Bdedpfx Amozy Hx Dereh Spindle speed: max. 4,000 rpm Tool turret: 12-position BMT60 star turret Tool drive: 40 / 14 Nm Speed of driven tools: max. 10,000 rpm Overhang length of driven tools: 100 mm Chuck: 10" hollow chuck, Ø 254 mm Chuck cylinder: hollow chuck cylinder BB210A821 Tailstock: NC tailstock Tailstock taper: MK 5 MACHINE DETAILS Coolant type: water-miscible coolant / emulsion Coolant pressure: 5 bar Extraction connection: Ø 150 mm Mains voltage: 380 V Frequency: 50 Hz Transformer power: 45 kVA Phases: 3 phases Isolation transformer: 400 V ± 5 % Current: 65 A Control system: Mitsubishi 730UM CELOS User interface: CELOS with ERGOline touch panel Machine operating time: 7,597 h Program runtime: 2,138 h Last maintenance: April 2024 Weight: 5,800 kg EQUIPMENT DMG MORI M730UM control system with CELOS ERGOline touch panel 12-position BMT60 star turret with driven tools 10" hollow chuck, Ø 254 mm Hollow chuck cylinder BB210A821 Double foot switch with protective cover NC tailstock with MK-5 mount Oil-air cooler for circulating spindle coolant Hinged belt chip conveyor High-pressure coolant system, 5 bar Oil mist separator AFS 1100 including interface Manual, swiveling tool pre-setter SCHNEIDER transformer 45 kVA Technology cycle "Alternating Speed" Further technical data can be found in the document attached!

Year of construction: 2011, condition: ready for operation (used), A dough sheeting machine Fritsch for folded dough sheets for subsequent processing is available. Belt width: 700mm, working width: 650mm, roller gap range: 0.3mm-50mm, roller diameter: 98mm, max. dough block weight: approx. 20kg, belt speed: 50m/min, machine dimensions X/Y/Z: approx. 3300mm/1250mm/1550mm, weight: approx. 500kg. An on-site inspection is possible. Bdedpfoy D Tpgex Amrsh

Condition: good (used), OFFER 21469 Technical data: Bdodjhg Tpzjpfx Amreh - Clamping surface width, each: approx. 850 mm - Clamping surface height: approx. 700 mm - Clamping block depth: 300 mm - Overall height with clamping base: 750 mm - Clamping base dimensions: 850 x 450 mm - Clamping holes: M16 - Distance between clamping holes: 40 mm - Number of clamping holes per side: 336 pcs - Total number of clamping holes: 772 pcs - Internal dimensions of clamping block, each: 380 x 220 mm - Wall thickness of clamping surfaces: approx. 40 mm - Side-mounted 3-jaw chuck: 300 mm - Side-mounted hydraulic machine vice RÖHM - Jaw width: 200 mm - Weight: approx. 700 kg

Condition: new, overall weight: 4,400 kg, total height: 310 mm, total length: 4,000 mm, total width: 1,500 mm, Clamping plates - T-slot plates 4000 x 1500 x 310 mm If you have not found the size you are looking for, you can also send us an e-mail with the completed PDF form. With this form we can produce an individual plate for you. Bsdpfxetrli Ro Amredh Number of hookers: 5 Edge distance: 14mm Hook spacing: 270mm Hook width: 28mm Material: cast iron HT250. Flatness less than 0.12 mm. Surface processed according to DIN 876 / III

Condition: new, Year of construction: 2026, faceplate diameter 1000 mm faceplate with 4 clamps: inkl. boring diameter 280 mm weight 419 kg 4-jaw faceplate K72 – Ø 1000 mm Our high-precision 4-jaw faceplate K72 1000 mm was specially developed for the secure and reliable clamping of a wide variety of Bjdpfx Aex S Ry Sjmrjdh workpieces on lathes – ideal for asymmetrical, rectangular or difficult-to-position components. Technical features - Diameter: 1000 mm - Design: 4-jaw faceplate, independently adjustable jaws - Material: High-quality cast body for maximum stability and vibration damping - Clamping jaws: Standard with hard clamping jaws Optional clamping claws according to customer requirements (soft, special shape, special size) - T-slot design: for flexible additional clamping forces - High concentricity with heavy workpieces - Suitable for large turning diameters and high clamping forces Mounting & standardisation The K72 faceplate is not standardised as a complete faceplate (no uniform DIN or ISO standard for diameter, jaw geometry or hole patterns). However, the machine mounting is based on common standards, e.g.: - DIN 6350 (centring mount) - DIN 55029 (camlock mount, e.g. D11 / D15) = This allows adaptation to almost any machine, either directly or via adapter solutions. Other sizes & designs available on request In addition to the K72 1000 mm, we also offer other large faceplates for heavy-duty and special applications: K72 1250 mm K72 1800 mm K78 1800 mm K78 2000 mm ? Delivery to order ? Customised mounting design ? Clamping claws na Translated with (free version)

Condition: new, Year of construction: 2026, faceplate diameter 1000 mm faceplate with 4 clamps: inkl. boring diameter 280 mm weight 419 kg 4-jaw faceplate K72 – Ø 1000 mm Our high-precision 4-jaw faceplate K72 1000 mm was specially developed for the secure and reliable clamping of a wide variety of workpieces on lathes – ideal for asymmetrical, rectangular or difficult-to-position components. Technical features - Diameter: 1000 mm - Design: 4-jaw faceplate, independently adjustable jaws - Material: High-quality cast body for maximum stability and vibration damping - Clamping jaws: Standard with hard clamping jaws Optional clamping claws according to customer requirements (soft, special shape, special size) - T-slot design: for flexible additional clamping forces - High concentricity with heavy workpieces - Suitable for large turning diameters and high clamping forces Mounting & standardisation The K72 faceplate is not standardised as a complete faceplate (no uniform DIN or ISO standard for diameter, jaw geometry or hole patterns). However, the machine mounting is based on common standards, e.g.: Bsdpfx Amex S Rzcsrjdh - DIN 6350 (centring mount) - DIN 55029 (camlock mount, e.g. D11 / D15) = This allows adaptation to almost any machine, either directly or via adapter solutions. Other sizes & designs available on request In addition to the K72 1000 mm, we also offer other large faceplates for heavy-duty and special applications: K72 1250 mm K72 1800 mm K78 1800 mm K78 2000 mm ? Delivery to order ? Customised mounting design ? Clamping claws na

Condition: good (used), Granite Measuring Plate 760 x 1190 x 700 mm Dimensions: H x W x D 760 x 1190 x 700 mm Bdjdpfxsxl Rkue Amrjh Material Thickness: 800 mm Find more items – new and used – in our shop! International shipping costs on request!

Condition: new, length 900 mm width 600 mm height 750 mm weight / kg Workbench with clamping plate on castors With 2 drawers and 2 hinged doors Condition: New clamping plate: Material: cast iron HT250. Surface roughness: ra3.2-ra6.3. Flatness less than 0.12mm. Surface processed according to DIN 876 Length: 900mm Width: 600mm Height: 550mm Number of grooves: 3 Edge distance: 140mm Groove distance: 135mm Groove width: 14mm Groove height: 24mm overall dimension Bodpfoyq S E Eox Amrjdh Length: 900mm Width: 600mm Height: 750mm Assembled delivery - immediately ready for use

Condition: new, length in total 7969 mm band width 700 mm conveying height 2500 mm total power requirement 0,75 kW Please complete the attached form and return it to us by email for quotation preparation. Hinged Belt Conveyors – Overview & Features General - Hinged belt conveyors can be manufactured according to purpose and dimensions. - The design and belt system are robust and durable, provided regular maintenance is carried out. - Most commonly used type of chip conveyor. Applications Transport of: - Long, coarse, corrugated, and crumbly chips - Materials such as transmission steel, tool steel, aluminum alloys, Teflon, Delrin, etc. - Designed for conveying chips from the production process. Bdedpsymf Tnsfx Amreh - Separation of cutting oil/coolant from the chips. Versions - Available with or without a tank for returning cutting oil/coolant to the system. - Four standard chain pitches: 31.75 mm, 38.10 mm, 50.80 mm, 63.50 mm. - Chain pitch selected according to the amount of chips to be conveyed. - Conveyor width, length, motor, and gearbox are matched to the hourly conveying capacity. - Coolant recycling is taken into account during the design. Control - Operation via control panel or CNC control of the machine tool. - Control via plug-in connection possible. Note: Images are for reference only and are not to scale.

Condition: ready for operation (used), Year of construction: 2014, operating hours: 30,170 h, travel distance X-axis: 260 mm, travel distance Z-axis: 795 mm, overall weight: 4,800 kg, number of axes: 2, CNC Turning Center manufactured in 2014. This DMG MORI NLX 2500/700 features a maximum turning diameter of 260 mm and a turning length of 795 mm. With a robust machine weight of 4800 kg and a rated power of 25 kVA, it is designed for precision and efficiency. If you are looking to get high-quality turning capabilities, consider the DMG MORI NLX 2500/700 machine we have for sale. Contact us for further details. • Machine type: CNC Turning Center • Year: 2014 • Made in: Japan • Serial number: NL252340704 • Max. turning diameter: 260 mm • Max. turning length: 795 mm • Rated power: 25 kVA • Machine connected and available for inspection/testing. • Main electronic connection: 200 V, 3-phase, 50 Hz Bdjdpoz Akp Sefx Amrsh Technical Specification Through-spindle Coolant No Counter Spindle No Driven Tools No

Condition: good (used), Year of construction: 1991, Control: Fanuc 15 Bsdpezwvp Tofx Amrjdh Maximum turning diameter over bed: 1500 mm Maximum turning diameter over carriage: 1200 mm Distance between centers: 7000 mm Spindle bore: 100 mm Spindle speed: 2.5 to 250 rpm Travel in X-axis: 560 mm Travel in Z-axis: 7200 mm Travel of tailstock: 350 mm Tailstock: MT 7, 260 mm diameter Main spindle motor: 37/45 kW AC Maximum workpiece weight between centers: 15000 kg Turret: 8 positions Steady rest 1: 100 to 150 mm diameter Steady rest 2: 300 to 600 mm diameter Machine weight: 35 tons The machine was originally designed with a C-axis and milling capabilities, but this function was never used, and therefore the machine is offered as a pure turning machine.

Condition: new, turning diameter over bed 250 mm turning diameter over slide rest 145 mm turning length 550 mm turning speeds 50 - 2000 U/min centre height 125 mm spindle bore 26 mm tailstock quill taper MT 2 MK Bjdpfx Amskxhqnsrsdh connected load frequency 230 V total power requirement 0,75 kW weight of the machine ca. 0,12 t dimensions of the machine ca. 1,3 x 0,65 x 0,6 m longitudinal feed. 3-jaw chuck 125 mm. 4-way steel holder. chip tray, bulkhead Hardened bed tracks. Emergency stop switch. lining protection Tool box, instruction manual.

Condition: new, Year of construction: 2026, number of rollers: 3, Equipment: swiveling upper roller, - Capacity: 700 x 4 mm - Conical rollers - Removable top roller - Brake motor - Foot pedal control - Emergency stop - Documentation Bdedpfx Amoh Raytjroh - 400V

Condition: used, Universal milling machine table, angle table, setup angle, clamping table, presumed MAHO make T-slot table, add-on table for universal tool milling machine Table no.: 76-400-1 / 2210 05 00 Table size: 700 x 330 mm Overall height: 210 mm T-slot width: 12 mm T-slot pitch: 45 mm - Table plate with 7x T-slots, 12 mm each - Mounting surface 90°, 13 mm diameter holes, 14 mm elongated holes for fastening and 12 mm guide slot - Hole spacing, top mounting plate Ø 13 mm = 500 mm, 50 mm from the table surface (measured at center) - Hole spacing, middle mounting plate Ø 13 mm = 472 mm, 95 mm from the table surface (measured at center) - Elongated hole spacing, middle mounting plate = 475 mm, 140 mm from the table surface (measured at center) - Elongated hole spacing, bottom mounting plate = 475 mm, 185 mm from the table surface (measured at center) Dimensions (L x W x H): 820 x 330 x 210 mm Weight: 61 kg Bjdpfxoxy Styo Amredh In good condition

Condition: excellent (used), Year of construction: 2006, travel distance X-axis: 13,000 mm, travel distance Y-axis: 3,500 mm, travel distance Z-axis: 1,000 mm, spindle speed (max.): 8,000 rpm, spindle speed (min.): 6 rpm, feed rate X-axis: 30 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 30 m/min, total width: 7,000 mm, total length: 21,000 mm, total height: 5,100 mm, overall weight: 80,000 kg, mount diameter: 50 mm, The Pama Speedram 1000 is a versatile and powerful floor drilling and milling machine designed for heavy industrial applications. This machine offers advanced features and specifications that meet the highest standards of precision and efficiency. PAMA automatic head change system PAMA MG4 high speed head: 8000 rpm & 20 kW PAMA CU130-90S tool changer: up to 1300 kg tool weight Chip conveyor: 235 mm and 1200 mm outfeed height Double base plate field: 4000 x 2500 + 4000 x 2500 mm Spindle torque: 1525 Nm Floor drilling and milling machine: cast iron column, gray cast iron, hydrostatic guides, geometric compensation RAM type: 360 x 400 mm with spindle Ø150 mm Note: No cooling system, dry operation. X - axis: 13000mm Y - axis: 3500mm Z - axis: 1000mm W - axis: 700mm Speed: 6 - 3500 (8000)Rpm Power: 37kW Bdsdpfx Aeu Avwvemrjh Ram dimension: 360 x 400mm Tool holder: 50ISO/Bt/Mk Feed X - axis: 30000mm/min. Feed Y-axis: 20000mm/min. Feed Z-axis: 30000mm/min. Feed W-axis: 30000mm/min. Tool changer: 90 Control: 840D Number of controlled axes: 4 Length: 21000mm Width: 7000mm Height: 5100mm Weight: 80000kg

Condition: ready for operation (used), Year of construction: 2019, operating hours: 2,808 h, functionality: fully functional, machine/vehicle number: NL257181158, turning length: 705 mm, travel distance X-axis: 260 mm, travel distance Y-axis: 50 mm, travel distance Z-axis: 795 mm, swing diameter over cross slide: 742 mm, swing diameter over bed slide: 920 mm, New auction due to buyer's payment default! TECHNICAL DETAILS Working Area Swinging diameter over bed max.: 920 mm Swinging diameter over cross slide max.: 742 mm Turning length max.: 705 mm Bar capacity: 80 mm X-axis travel: 260 mm Y-axis travel: 50 mm Z-axis travel: 795 mm Main Spindle Power: 18.5/15 kW Speed max.: 4,000 rpm Chuck size: 10 inches Spindle bore: 91 mm Front bearing diameter: 140 mm Counter Spindle Power: 11/7.5 kW Speed max.: 4,000 rpm Chuck size: 6 inches Spindle bore: 45 mm Front bearing diameter: 85 mm Turret and Axes Tool stations: 12 Arbor cross-section: 25 mm Speed of driven tools max.: 10,000 rpm Rapid traverse X-axis: 30,000 mm/min Rapid traverse Y-axis: 10,000 mm/min Rapid traverse Z-axis: 30,000 mm/min Rapid traverse B-axis: 30,000 mm/min MACHINE DETAILS Control: M730UM with CELOS Dimensions & Weight Machine height: 2,000 mm Footprint: 3,347 x 2,106 mm Weight: 5,820 kg Operating hours: 2,808 h Power-on hours: 11,311 h Bedszck Txepfx Amrodh EQUIPMENT Y-axis Counter spindle Main spindle with 10-inch chuck Counter spindle with 6-inch chuck Chip conveyor High-pressure coolant system Tool measuring device Parts catcher Workpiece ejector Interface for bar loader

Year of construction: 2022, operating hours: 180 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 2005871-N650050, Machine Overview Machine Name: 2022 Neomec Rover Cab 1000 x 2700 Automatic Spraying Machine Condition: Used / Lightly Used Origin: Made in Italy Location: Near Sofia International Airport (10 minutes away), Bulgaria Technical Specifications & Features Bdedpfxoz D S Ags Amrjh Application: Automatic spraying machine designed for both flat and dimensional items. Integration: Designed to operate inside a conventional spray booth (Note: spray booth is not included). Fluid System: Equipped with an industrial Binks (CFT) pneumatic fluid handling / agitator system. Logistics & Inspection In-Person Inspections: Highly convenient location just 10 minutes from Sofia International Airport for easy buyer visits. Shipping: International shipping can be arranged upon request (Buyer covers shipping costs). For questions, additional information, or to schedule an inspection, please send a message or give us a call.

Condition: new, sheet width 700 mm plate thickness 4,0 mm distance between columns 720 mm diameter of upper rolls 95 mm total power requirement 1,1 KW weight of the machine ca. 0,37 t dimensions of the machine ca. 0,95 x 0,76 x 1,25 mm Bdedpfxsfv H Axe Amreh

Condition: used, Clamping plate with T-slots and cross table, plate field, welding table, welding table, plate boring machine, T-slot plate -T-grooved plate comes from: from a milling machine -Travel: approx. 1200 mm -Width: 700 mm -Length: 2000 mm -Height: 510 mm -Plate thickness: mm -Table height: mm -Plate: is solid -Groove width: mm Bdsdpfx Amsduiwworjh -Dimensions: 3030/850/H510 mm -Weight: approx. 1200 kg

Condition: new, plate width nach Wunsch plate depth nach Wunsch plate height nach Wunsch Bdsdpfx Ameymf Ufsreh #-Plates made to measure Below you can see some examples with different dimensions. 1000 mm x 1000 mm x 200/300 mm 1500 mm x 1500 mm x 200/300 mm 2000 mm x 2000 mm x 200/300 mm 3000 mm x 1500 mm x 500 mm 3500 mm x 2500 mm x 400 mm 4000 mm x 3000 mm x 300 mm 5000 mm x 1500 mm x 300 mm 6000 mm x 1500 mm x 300 mm 7000 mm x 3000 mm x 300 mm Casting qualtity: HT 250. Surface is machined according to DIN 876/III System plate field - Clamping plate - Clamping cube - Clamping angle - Modular plate - Plate field - Milling table - Clamping tables

Condition: used, Technical details: floor-plate length: 1100 mm Bjdpfeu N Dyrox Amredh plate width: 700 mm plate height: 85 mm weight of the machine ca.: 430 kg Clamping plate, cast steel with T-slot according to DIN 650 a=25; h=41; b=48;c=24mm; center distance 76mm *

Condition: like new (used), Manufacturer: V. Randwijks Rotor Dia.: 500mm Bdedpfx Asg Snt Somreh Rotor Width: 700mm Electrical Motor: 22kW / 1.470 RPM

Condition: good (used), Code: 0015 Bdsdpfx Aevutm Iomrsh Brand: FRAVOL - ITALY Model: RAPID RX 700 - CE Standard Automatic electronic edge bander for EVA - PUR - POLYURETHANE glue, with grinding unit for applying Pvc, Abs , melamine , veneer , solid strip and roll edges, for joinery workshops, custom furniture, naval furniture, doors, panels, kitchen furniture, bathroom furniture - CE Standard Panel thickness min/max mm 10/120 Panel length min mm 140 Panel width min mm 60 Edge thickness mm 0,4 - 16 Variable feed 10-20 mt/min Automatic presser lift Composition: Touch Screen electronic control 10,7" colour Controlled axis infeed guide Group 2 incoming grinders for perfect panel grinding - Motors Kw 2,2 - Rpm 6000 - Diamond tools mm 100 x 120 x 30 Infrared lamp 0-600 degrees - Watt 600 Cooling anti-adhesive spray system Edge height mm 120 Automatic edge loader Universal gluing unit with pre-melting unit for polyurethane glue and EVA glue - Quick release glue pot - Controlled axis pressers Roll edge cutting 3 mm Pvc/Abs Glue pot cleaning table End cutting unit with 2 tilting motors each 0,50 kW - 12000 rpm Tilting trimming unit with controlled axis - Motors Kw 1,1 - Rpm 12000 Rounding unit with 2 motors with controlled axis - Motors Kw 0,22 - Rpm 12000 Scraping unit with controlled axis Glue scraping unit Brush unit - Motors 0,18 Kw - Rpm 1400 Dryer unit 0-600° - 4000 watt Soundproof booth Fixed panel support roller conveyor Suction n° 7 inlets diameter 80 - N° 1 inlet diameter 120 Installed power Kw 22 Compressed air 6 bar Overall dimensions mm 6730 x 1500 x 1910 h Weight kg 2400

Condition: used, Herkules WS1100 x 7000 CNC roll grinder (re-manufactured by Metex - Year 2011) Model WS1100 x 7000 18 ton capacity 1100mm swing 7000mm between centres Single saddle 700mm chuck Lismar roll inspection Waste conveyor Siemens Sinumerik 840 DSL controls Bedoy U Hc Ijpfx Amrjdh Safety fence

Condition: excellent (used), Year of construction: 1980, Gurutzpe Super BT lathe 700 x 6000 mm e.p, turning over bed 1380mm, over cross slide 1045mm, over neck 1770mm, neck length before plate 620mm, diameter of the spindle bore 102 mm , speeds 2.8-400rpm, 40cv motor, plate of 4 independent jaws with a diameter of 1200mm, with a fixed steady rest and a mobile one, bed width 800 mm, diameter of the tailstock axis 140mm, max weight on lathes between points 10tns with a steady rest 12tns, estimated weight of the lathe 17600kg, pre-owned lathe electrical panel in very good condition condition Bsdpoiqyv Iefx Amrodh