Used Geiss Fz 2800X1000/Fz 2000X1000 for sale (264)

Condition: used, mileage: 253,000 km, power: 120 kW (163.15 HP), first registration: 10/2015, fuel type: diesel, overall weight: 4,800 kg, color: white, gearing type: automatic, emission class: euro6, number of seats: 5, total height: 2,850 mm, Year of construction: 2015, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), parking heater, soot filter, RTW 516 WAS Case internal No:Fz 385 Csdjr Sxldjpfx Ailjrh with new MOTOR original Mercedes ATM and overhauled gearbox MB Sprinter RTW according to DIN EN1789 / DIN EN 13500 Sandwich box body incl. additional hot water heating, etc. * Sendwisch aluminum/GRP box body with lowered box removal door, vacuum mattress door inside * Rear portal: work lights, reversing camera * Vehicle lights and flashing lights * Rear of vehicle fitted with spring-mounted impact protection / rear step * Ceiling center, patient compartment floor, design of the doors, pull-out cabinets, compressor refrigerator, flaps, equipment holders, oxygen lines, blue light system CAN bus central electrics, lighting of the exterior storage compartments and interior lighting correspond to the standard EU RTW design. * Each stretcher system is customizable, very very good condition ready for immediate use / vehicle is reconditioned no dents or scratches / stretcher possible for an extra charge / ABS + ASR, ESP / 2x airbag / electric exterior mirrors / electric windows / 2x battery 12 V 88 AH / engine preheating / auxiliary heating / power steering / stabilizer reinforced / tachograph / air conditioning / immobilizer / rear working light, outside connection 220V / fire extinguisher / center armrest / reversing camera / reading lamp / radio pre-installation / optical signaling system / beam & front flasher acoustic signaling system. Financing or installment plan possible !!! Our used special vehicles are checked, prepared and maintained by an experienced team of service technicians from the special vehicle industry, so that a TÜV or Dekra seal is as self-evident as the immediate operational readiness of all rescue vehicles. FZ is almost like new !!! On this RTW we grant a guarantee of 12 months !!! Sold without medical and technical equipment, but can be purchased separately. Our service - for you ! * 20-40 immediately available RTW always immediately available in our company * DEKRA or TÜV SIEGEL on request * FINANCIAL SERVICE - financing - leasing or installment plan can be individually tailored to your needs * WARRANTY - up to 36 months possible at extra cost * Accident replacement vehicles in stock * Reconditioning - All vehicles are professionally prepared and reconditioned for you by our team * Further vehicle offers and service points can be found under: We look forward to your call / The G&G team is at your disposal at any time. We speak Italian - English - Polish - Spanish and can certainly help you if you are looking for a good used ambulance. This advertisement serves only as a preview of our vehicle and is not part of a sales contract. Information given on the Internet are non-binding descriptions and do not represent guaranteed characteristics. The seller is not liable for errors, input errors and data transmission errors. Subject to changes and prior sale!

Condition: used, mileage: 176,000 km, power: 140 kW (190.35 HP), first registration: 07/2020, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: automatic, emission class: euro6, number of seats: 5, total height: 2,850 mm, Year of construction: 2020, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), parking heater, soot filter, Vet / Animal rescue / OP vehicle / RTW case Special RTW for veterinarian / animal rescue / castration / OP OP table adjustable / stainless steel OP lamps Hot-cold water Airconditioning system in case Parking heater / air heater / water heater 230V / 12V sockets 230V external power connection outside Reversing camera Automatic gearbox Special requests can be considered ! There is enough space to install additional equipment Optional: Solar system 230V Power unit 230V Buffer batteries Marker on the right side Loaded to 3.5t / gross weight 3210 kg We also have such converted special RTWs for dentists Financing or rental possible Sandwich box body incl. additional hot water heating, etc. * Rear of vehicle fitted with spring-mounted ram protection / rear step * Ceiling center, patient compartment floor, design of the doors, pull-out cabinets, compressor refrigerator, flaps, equipment holders, oxygen lines, lighting of the exterior storage compartments and interior lighting correspond to the standard EU RTW design. very very good condition ready for immediate use / vehicle is reconditioned no dents or scratches / stretcher possible for an extra charge / ABS + ASR, ESP / 2x airbag / electric exterior mirrors / electric windows / 2x battery 12 V 88 AH / engine preheating / auxiliary heating / power steering / stabilizer reinforced / air conditioning / parking climate / immobilizer / rear working light, 220V outside connection / fire extinguisher / center armrest / reversing camera / reading lamp. Financing or installment plan possible !!! Our used special vehicles are checked, prepared and maintained by an experienced team of service technicians from the special vehicle industry, so that a Tüv or Dekra seal is as self-evident as the immediate operational readiness of all rescue vehicles. FZ is almost like new !!! Codpfx Aisl Uwatjlorh On this RTW we grant a guarantee of 12 months !!! Sold without medical and technical equipment, but can be purchased separately. Our service - for you ! * 20-40 immediately available RTW always immediately available in our company * DEKRA or TÜV SIEGEL on request * FINANCIAL SERVICE - financing - leasing or installment plan can be individually tailored to your needs * WARRANTY - up to 36 months possible at extra cost * Accident replacement vehicles in stock * Reconditioning - All vehicles are professionally prepared and reconditioned for you by our team * Further vehicle offers and service points can be found under: We look forward to your call / The G&G team is at your disposal at any time . We speak Italian - English - Polish - Spanish and can certainly help you if you are looking for a good used ambulance. This advertisement serves only as a preview of our vehicle and is not part of a sales contract. Information given on the Internet are non-binding descriptions and do not represent guaranteed characteristics. The seller is not liable for errors, input errors and data transmission errors. Subject to changes and prior sale!

Condition: used, mileage: 101,844 km, power: 114 kW (155.00 HP), first registration: 07/2001, fuel type: diesel, empty load weight: 3,840 kg, maximum load weight: 11,160 kg, overall weight: 15,000 kg, axle configuration: 4x2, fuel: diesel, color: orange, driver cabin: other, gearing type: mechanical, emission class: euro2, suspension: other, number of seats: 2, total length: 8,330 mm, Year of construction: 2001, operating hours: 7,385 h, construction height: 3,270 mm, Equipment: trailer coupling, No suction power. The MAN LE 1608 KOMMUNAL KROLL BY SFZ is a robust municipal vehicle in used condition. This right-hand drive vehicle, first registered on July 23, 2001, has a mileage of 101,844 km and is powered by a 4,580 cc diesel engine with 114 kW (155 hp). Equipped with a manual transmission and six gears, it offers space for two people. The vehicle's body includes a Kroll Variant structure and various useful features, such as a rear-view camera and a front mounting plate. With a length of 8,330 mm, a width of 2,500 mm, and a height of 3,270 mm, the MAN KEHRMASCHINE is an impressive vehicle. The permissible total weight is 15,000 kg. Cjdpfor Uzknex Ailerh Front mounting plate, trailer hitch, Kroll Variant BY body. Rear-view camera. Vehicle is labeled/stickered. For sale only to commercial businesses (agriculture, freelancers, small and large businesses) or for export. Errors and prior sale excepted.

Condition: good (used), mileage: 176,991 km, power: 235 kW (319.51 HP), first registration: 05/2015, fuel type: diesel, tire size: 355/50R22.5, axle configuration: 6x2, fuel: diesel, fuel tank capacity: 400 l, color: white, driver cabin: day cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: air, loading space length: 7,350 mm, loading space width: 2,450 mm, loading space height: 2,150 mm, Year of construction: 2015, Equipment: ABS, AdBlue, EBS, USB port, air conditioning, central locking, cruise control, differential lock, electric window regulation, electronic stability program (ESP), fog lights, navigation system, onboard computer, parking heater, power assisted steering, soot filter, spoiler, tail-lift, traction control, trailer coupling, = Additional Options and Accessories = - Alarm system - Armrest - Audio controls on the steering wheel - AUX input - Outside temperature display - Becker holder - Sunroof - Roof spoiler - Differential lock - Differential lock - Tachometer - Electric mirrors, heated - Extra lighting - Driver airbag - Driver seat height adjustment - Remote central locking - Speed limiter - Tinted glass - Height-adjustable steering wheel - Height adjustment for driver's seat - Folding exterior mirrors - LED lighting - Air horn - Air suspension - Multifunction steering wheel - Particulate filter - Radio/CD player - Rearview camera - Disc brakes - Headlight leveling - Sun visor - Auxiliary heater - Immobilizer - Tachograph - Tow hitch = Additional Information = Technical Information Number of cylinders: 6 Axle Configuration Tire size: 355/50R22.5 Axle brand: Goodyear Brakes: Disc brakes Suspension: Air suspension Front axle: Steered; Tire tread left: 60%; Tire tread right: 60% Rear axle 1: Dual tires; Tire tread left inside: 60%; Tire tread left outside: 60%; Tire tread right inside: 60%; Tire tread right outside: 60% Rear axle 2: Steered; Tire tread left: 60%; Tire tread right: 60% Weights Unladen weight: 11,030 kg Payload: 14,970 kg GVW: 26,000 kg Csdjzz Aliepfx Ailsrh Functional Tail lift: Cargolift, tailgate, 2000 kg Loading platform height: 100 cm Condition Technical condition: good Optical condition: good Damage: none Financial Information Price: On request = Company Information = Nidro cars Holland is located in the center of the country and is the right place to buy your car, van, or truck. The indicated price is the 'internet take-away price'. For questions or a test drive, please contact us: VIEW OUR ENTIRE INVENTORY AT All trade-ins are possible with us! (Our advertisements are compiled with great care, but no rights can be derived from the content).

Condition: good (used), mileage: 367,366 km, power: 338 kW (459.55 HP), first registration: 01/2018, fuel type: diesel, axle configuration: 8x4, fuel: diesel, color: grey, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, loading space length: 11,370 mm, loading space width: 2,550 mm, loading space height: 3,990 mm, Year of construction: 2018, operating hours: 5,152 h, Equipment: ABS, AdBlue, air conditioning, central locking, electric window regulation, = Additional options and accessories = - 3rd control valve - Speed limiter - Cab - Air suspension - Reversing camera - Sun visor - Power Take-Off (PTO) = Further information = Credpfxjy D Ak Te Ailoh Axle configuration Front axle 1: Steered Rear axle 1: Steered Weights Unladen weight: 18,963 kg Payload: 13,037 kg Gross vehicle weight (GVW): 32,000 kg Functionality Mast: Telescopic (9 sections) Mast length: 26 m Lifting capacity: 6,700 kg Number of control valves: 3 Superstructure brand: PALFINGER PK 34.002 SH E + PJ 60 B CE marking: yes Condition Technical condition: good Visual condition: good MAN 35.460 8X2 CURTAINSIDER FLATBED WITH PALFINGER PK34.002 + JIB PJ 060 B CRANE EURO 6 L PACKAGE 460 HP DRIVE 8X4 – 4TH AXLE LIFTABLE AND STEERABLE WHEELBASE: 420 CM LEAF/AIR SUSPENSION DIFFERENTIAL LOCK DAY CAB WITH AIR CONDITIONING, REFRIGERATOR, RADIO, MULTIMEDIA, NAVIGATION, REVERSING CAMERA, AUTOMATIC TRANSMISSION WITH ENGINE BRAKE CURTAINSIDER FLATBED WITH SLIDING ROOF LENGTH 661 CM, WIDTH 254 CM, HEIGHT 264 CM PALETTE FORK KINSHOFER KM461-2000 TOOL BOXES TRAILER COUPLING PALFINGER PK34.002 + JIB PJ 060 B CRANE TOTAL OPERATING HOURS: 5,152 ADDITIONAL 5TH AND 6TH FUNCTIONS 9X HYDRAULIC EXTENSIONS TOTAL 4X BOOM EXTENSIONS RADIO REMOTE CONTROL MAX. LIFTING CAPACITY AT 4.3 M: 6,700 KG MAX. LIFTING CAPACITY AT 19.5 M: 1,420 KG MAX. LIFTING CAPACITY AT 26.0 M: 570 KG MAX. WORKING HEIGHT: 29.0 M WE SPEAK GERMAN WE SPEAK ENGLISH HABLAMOS ESPAÑOL

Condition: used, Year of construction: 1965, pressure 400 t throat 1140 mm stroke 600 mm table surface area 2000x1000 mm Plate 4000x1000x300 mm ram head dimension 2000x1040 mm Cylinder 300 mm Daylight 650 dimensions of the machine ca. 3,9x4x4,2 m Machine has been overhauled. Maximum distance from ram to clamping plate: 1250 mm The tech. Data are manufacturer or operator information and therefore non- Crjdoyt R Dljpfx Ailsh binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: excellent (used), Year of construction: 1972, functionality: fully functional, For sale: this gear hobbing machine. It is connected and can be tested. Comes with numerous accessories. Csdpfx Aoxwlthjilorh Technical specifications: Max. gear diameter: 7100 mm Gear width: 1500 mm Max. module: 45 Table diameter: 4000 mm Hob diameter x width: 400 x 500 mm Max. helix angle: 45 degrees Cutter diameter: 500 mm Cutter speed: 9–63 rpm Total power consumption: 47 hp Machine weight: 160,000 kg The machine has hydraulic workpiece balancing. A video of the machine can be sent via WhatsApp.

Condition: excellent (used), mileage: 483,500 km, power: 315 kW (428.28 HP), first registration: 06/2001, fuel type: diesel, tire size: 385/65R22,5, axle configuration: 6x4, wheelbase: 6,650 mm, fuel: diesel, fuel tank capacity: 430 l, color: green, driver cabin: sleeper cab, gearing type: mechanical, number of gears: 16, emission class: euro3, suspension: other, number of seats: 2, total length: 9,310 mm, total width: 2,530 mm, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 11,500 kg, permissible axle load (axle 3): 11,500 kg, Year of construction: 2001, Equipment: ABS, crane, cruise control, differential lock, electric window regulation, trailer coupling, = Additional Options and Accessories = - 430 liter diesel tank - Heated mirrors - Comfort seats for driver - Differential lock - Differential lock - High beam lights - Speed limiter - Hydraulic system - Air horn on cab roof - Hub reduction - Radio/CD player - All-round lights - Sleeper cab Codpjy R Rwhefx Ailjrh - Sun visor - Power take-off (PTO) - ZF16 manual gearbox - Tow hitch = Notes = GOOD CONDITION GINAF M3232-S 6x4 CHASSIS WITH LOGLIFT (V-CRANE) & LEEBUR HOOKARM SYSTEM, ZF-16 MANUAL GEARBOX & REDUCTION AXLES!! 430HP, DAF 6-CYLINDER ENGINE (EURO 3)!! ZF16 MANUAL GEARBOX!! REDUCTION AXLES!! (DAF AXLES!!) STEEL SUSPENSION FRONT AXLE!! P.T.O.!! HYDRAULIC SET!! ETC.!! LEEBUR 20,000 KG HOOK-ARM SYSTEM (> 6 METER CONTAINERS) LOGLIFT (V-CRANE) F105Z27A CRANE BEHIND CABINE! CLAMB WITH 360 ROTATION!! TRUCK IS IN GOOD WORKING & DRIVING CONDITION, READY FOR THE HEAVY CONSTRUCTION JOBS!! MORE 4x2 / 4x4 / 6x2 / 6x4 / 8x4 (CONSTRUCTION) TRUCKS IN STOCK FOR SALE!! (>75 TRUCKS/TRAILERS IN STOCK)!! SHIPMENT, STACKING, TRANSPORT OR LOADING?, NO PROBLEM FOR US, WE ARE AN "ONE STOP SHOP" COMPANY!! PLEASE CHECK OUR WEBSITE; YOU CAN ALSO WATCH OUR COMPANY MOVIE ON YOUTUBE FOR THE FIRST IMPRESSION!! ( / ) ENGEL TRUCKS; "YOUR GLOBAL TRADING PARTNER" = Further Information = Technical Information Number of cylinders: 6 Engine displacement: 12,580 cc Transmission Gearbox: ZF16 MANUAL GEARBOX, 16 gears, manual transmission Axle Configuration Brakes: Drum brakes Front axle: Tire size: 385/65R22.5; Max. axle load: 9000 kg; Steered; Tire tread depth left: 80%; Tire tread depth right: 80%; Suspension: Leaf spring suspension Rear axle 1: Tire size: 295/80R22.5; Dual tires; Differential lock; Max. axle load: 11500 kg; Axle brand: DAF; Tire tread depth left inner: 50%; Tire tread depth left outer: 50%; Tire tread depth right inner: 50%; Tire tread depth right outer: 50%; Reduction: External planetary axles; Suspension: Hydraulic suspension Rear axle 2: Tire size: 295/80R22.5; Dual tires; Differential lock; Max. axle load: 11500 kg; Axle brand: DAF; Tire tread depth left inner: 50%; Tire tread depth left outer: 50%; Tire tread depth right inner: 50%; Tire tread depth right outer: 50%; Reduction: External planetary axles; Suspension: Hydraulic suspension Weights Unladen weight: 15,500 kg Payload: 16,500 kg GVW: 32,000 kg Functional Lifting capacity: 10,000 kg Crane: LOGLIFT V-CRANE F105Z77A, year of manufacture 2001, behind the cab Body brand: LEEBUR 105Z 77A HOOK-ARM SYSTEM 105Z 77A Loading platform height: 130 cm Condition Technical condition: very good Optical condition: very good Identification License plate: BL-FZ-09 Further Information Please contact the Sales Department for further information.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 5,824 mm, travel distance Y-axis: 897 mm, travel distance Z-axis: 1,005 mm, rapid traverse X-axis: 6,000 m/min, rapid traverse Y-axis: 8,000 m/min, rapid traverse Z-axis: 8,000 m/min, spindle speed (max.): 4,000 rpm, rotational speed (max.): 4,000 rpm, Equipment: documentation/manual, SHW UFZ 4 Travel distances • X-axis (bed): 5,824 mm • Y-axis (horizontal spindle stock): 897 mm • Z-axis (vertical): 1,005 mm Control • CNC control: Heidenhain iTNC 530 Clamping plate • Clamping surface: 5,000 x 2,000 mm Crodox Uw Egopfx Ailjh Cross-traversing rotary table • Diameter: 1,400 mm (flattened) • Cross-axis travel: 1,131 mm Rapid traverse • X-axis: 6,000 mm/min • Y- and Z-axis: 8,000 mm/min Horizontal and vertical milling head • Tool holder: SK 50 DIN 69871 • Speed range: 36 – 4,000 rpm • Internal coolant supply • Spindle orientation with cycle 13 • Tapping without compensating chuck • The milling head was recently completely overhauled Automatic tool changer • Tool magazine for 45 tools Coolant system • Belt filter Chip conveyor Splash and chip guard General overhaul including control upgrade in 2008 About the company MBM MBM Maschinenservice & Gebrauchtmaschinen GmbH is an independent specialist for SHW machine tools. Our core business is in the field of tool milling machines. Our services include, among others, spare parts supply, on-site customer service, machine overhauls as well as control system modernizations. Services: - Used machines - Spare parts - Customer service - Machine service - Machine overhauls - Control system modernization ----- Used machine – used milling machine – used travelling column milling machine – metal machining – tool milling machine – milling head – SHW machine – SHW spare parts – used milling machine – used cnc milling machine – used boring milling machine – used metal milling machine – used metal mill – used cnc mill – cnc milling machines – milling machine – large part machining – cnc large part machining – milling – Heidenhain – MBM milling machine – MBM machine – column milling machine

Condition: used, maximum load weight: 28,228 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 05/2022, next inspection (TÜV): 07/2027, loading space volume: 92 m³, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, Kraker sliding floor semi-trailer, 92 m³, in good condition * First registration: 05/2022 * Lift axle * Disc brakes * EBS/ABS * Aluminum body * Sliding floor * Tool box * Underrun protection * Good tires * Well-maintained interior * Good overall condition * Ready for immediate use Codpfx Aijzviqbolerh If you have any questions, please do not hesitate to contact us.

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,360 mm, travel distance Z-axis: 1,000 mm, spindle speed (max.): 15,000 rpm, controller model: Heidenhain TNC430 PA, Submitting a bid obligates you to collect the machine on time, during calendar week 25! TECHNICAL DETAILS Travel range X-axis: 3,000 mm Travel range Y-axis: 2,360 mm Travel range Z-axis: 1,000 mm Feed rate X-axis: 20 m/min Feed rate Y-axis: 20 m/min Feed rate Z-axis: 20 m/min Rapid traverse rate X-axis: 20 m/min Rapid traverse rate Y-axis: 20 m/min Rapid traverse rate Z-axis: 20 m/min Spindle speed (max.): 15,000 rpm Torque: 57 Nm Spindle power: 18 kW Work table (L x W x H): 4,500 x 2,000 x 400 mm T-slots, lengthwise: 18H12 Distance between T-slots: 250 mm Tool interface: HSK 63 F Tool clamping: hydraulic MACHINE DETAILS Control system: Heidenhain TNC430 PA Type of input current: Three-phase Power requirement: 20 kW Frequency: 50 Hz Voltage: 400 V Fuse rating: 63 A Dimensions & Weight Machine footprint without control cabinet (L x W x H): 6,000 x 3,500 x 4,050 mm Total weight: 15,000 kg EQUIPMENT Spindle speed infinitely adjustable Tool changer Cjdpfxsy Sxkrj Ailerh TT140 measuring probe Note: Machine without enclosure. The zero-point clamping plates and other accessories shown in the pictures are not included in the scope of delivery.

Condition: excellent (used), Year of construction: 2014, x-travel 2500 mm y-travel 3000 mm z-travel 1250 mm Control HEIDENHAIN iTNC530 spindle turning speed - stepless 22000 U/min c-axis +-300° milling-head swivable +/- +-110° tool taper HSK 63 A tool change unit 50 Pos. total power requirement 130 kW weight of the machine ca. 53,5 t dimensions of the machine ca. 7,6 x 7,3 x 5,7 m This ZIMMERMANN FZ33c is available immediately and in good condition. - NEW spindle received 6 months ago Description: Technical specifications of the machine and working ranges X-axis 2500 mm Y-axis 3000 mm Z-axis 1250 mm A-axis ± 110 ° C-axis ± 300 ° Includes vibration sensor Includes bearing temperature sensor Includes rotary joint for internal tool magazine feed (IKZ) 5-axis path control: Heidenhain iTNC 530/handwheel HR520, 15” TFT colour display Extraction system LTA Industrial Air Cleaning Machine room canopy 50-position tool changer, chain magazine, behind the machine Chip conveyor, ejection 60° to the left, front-facing No probe available!!! Blum Laser tool measurement ‘Control NT-Micro’ Clamping table Length x width x height 2500 x 3250 x 400 mm Table load 8000 kg/m² (max. 16000 kg) T-slots, arranged longitudinally 18H12 T-slot spacing 250 mm Dimensions, weights Footprint (excluding peripheral equipment) approx. 7600 x 7300 x 5650 mm Total weight approx. 53500 kg Electrical connection data Voltage (three-phase) 400 V Frequency 50 Hz Compressed air connection (to be provided by customer) Required air pressure 6 bar Average air consumption approx. 15 m³/h (depending on machine configuration) Linear axis drives Feed rate X, Y, Z axes 60 m/min Axis acceleration X, Y, Z axes up to 5 m/s² Rotary axis drives – VH30 Feed rate A- and C-axis 360 °/s Axis acceleration A- and C-axis 700 °/s² Resolution A- and C-axis 0.0001 Accuracies of linear axes – in accordance with VDI / DGQ 3441 Positioning accuracy X-axis P= 0.026 mm Y-axis P= 0.028 mm Z-axis P= 0.020 mm Repeatability X-axis Ps= 0.015 mm Y-axis Ps= 0.016 mm Z-axis Ps= 0.010 mm Resolution of measuring systems (interpol) A-, C-axis 0.0001° Accuracy of rotary axes – VH30 Positioning accuracy A- and C-axis P= 12" = 0.0033° Repeatability A- and C-axis Ps= 8" = 0.0022° VH30 milling head 2-axis milling head: VH30, Siemens Weiss milling spindle Spindle power S1 (100% duty cycle) 60 kW, Spindle speed 22,000 rpm, 95 Nm, HSK-A63 External dimensions of fork head L x W approx. 500 x 600 mm Nominal torque of rotary axes Control loop A: min. 1,200 Nm C: min. 1,047 Nm Clamped A and C axes: 3,000 Nm Credpfezak Hgsx Ailjh (Continuous grease lubrication with automatic relubrication system) Swivel axis – spindle nose 326 mm Tool holder HSK 63 A Tool clamping Spring clamp Tool unclamping Hydraulic Permissible tool weight 4.5 kg (manufacturer’s specification) Coolant supply External and internal Coolant/lubricant supply (emulsion) at the front of the milling spindle with belt filter system Volume 1500 l Pump 1: 40 l/min at 20 bar Pump 2: 20 l/min at 40 bar, Air blow at the front of the milling spindle

Condition: used, Ball transfer table 2000-1007-1000 Cedpowhtc Iefx Ailjrh RA2407 Technical data: Year of manufacture: unknown Condition: good (used) dimensions: 2000x1000 distance balls: 55 mm row, with 75 mm pitch Height: 800 mm - 900 mm Scope of delivery: including feeds Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg For individual, professional advice, simply get in touch with us. Simply contact us by phone or by mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team of Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: refurbished (used), Year of construction: 2015, SPITZENBERGER & SPIES Bordnetzsimulation Supply Simulation System PAS 15000/GN/KFZ/OPD Cjdpfjwg Rzfox Ailjrh The device is from VW. Update: Device overhauled by the manufacturer. As pictured. According to specifications, the following tests can be carried out: Audi BDM LAH XXX.915.181.XX ISO 7637-2 ISO 16750-2 ISO 21848 LV 124 SAE J 1113-11 VW TL 80101 VW TL 82066 VW TL 82366 Among others, the following components are installed: Power Supply NT 15000/GN/Kfz SyCore 2-Quadrant Amplifier PAS 15000/GN/Kfz Overvoltage Protection Device OPD 15000/GN/Kfz The instruction manual can gladly be sent by email in advance. Viewing welcome. Also see my other measurement and test equipment offers.

Condition: used, Year of construction: 1993, Second-hand machine Year of manufacture: 1993 Bench-top machine The zigzag thread used as the adhesive medium is applied from below Automatic thickness and tolerance compensation for measured veneers Veneer from approx. 120 mm in length, 35 mm in width and a thickness of 0.3–2 mm Electrical connection: 230 V Column reach 700 mm Material feed rate approx. 6 m/min. Credpfxezk N D Ro Ailsh Weight approx. 54 kg Availability: at short notice Storage location: Flörsheim

Condition: used, Year of construction: 2009, - Veneer strip lengths (fiber direction): 350-1500 mm - Veneer strip widths (cross-fiber direction): 50-500 mm - Veneer surface width (cross-fiber direction): min. 260 mm - Veneer strip thickness: 0.3-1.5 mm Veneer machine with direct stacking Manufacturer: Fischer & Rückle Type: FZR 15 / DAR 22 Year of manufacture: 2009 Cross-feed splicer For the most efficient cross-gluing of parallel-joined veneer strips into endless or component-specific veneer surfaces. The cut or rotary-cut veneers must be pre-glued, using PVAc or urea adhesives. This cross-feed splicer is the most economical alternative to longitudinal splicers for cross-fiber applications. Production Approx. 17-20 joints/min Technical data Veneer strip lengths (fiber direction): 350-1500 mm Veneer strip widths (cross-fiber direction): 50-500 mm Veneer surface width (cross-fiber direction): min. 260 mm Veneer strip thickness: 0.3-1.5 mm Equipment Feeding device for efficient and convenient semi-automatic feeding of veneer strips. Panel automatic for component-specific surfaces with pre-sorted components and a pre-selected number of veneer strips. Features - Perfect bonding of cut or rotary-cut veneer of all wood species, even with wavy or undulating veneer - Unique, tried-and-tested horizontal pressing system that results in completely closed, solid glue joints - Solid, robust construction for a long service life, reliable and fail-safe operation - Easy operation thanks to screen, clear symbols, separate pressure gauge with direct access, etc. - Liftable pressure beams for quick and easy access to the heating plates for cleaning - Few wear parts, low costs for service and maintenance Cross-cutter For cutting to a pre-set format width (across the fiber direction) immediately after splicing. The straight alignment of the veneer must be observed and, if necessary, corrected by pressing a button. When working in endless mode, the required distance to the direct stacking device is set. Direct stacking device DAR-22 For outputting and stacking the veneer surface immediately after splicing or cutting. The spliced surfaces are gently output and stacked without this compact direct stacking device exerting any mechanical forces. Min. veneer sheet lengths (fiber direction): 350* - 1500 mm Codpfxozuz Hle Ailsrh Veneer sheet widths (across the fiber direction): 260 - 500* - 2200 mm Stack removal from the left, right, or rear Max. stack height: 500 mm *Reliable stack alignment not guaranteed Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 1995, Constant machine - combination station, dust brush - thickness measuring device - electronic segmented sanding pad MCS System Weber 32 mm - grooved steel calibrating roller - belt blow-off - vacuum conveyor belt. Sanding width: 1100 mm Drive: 15 kW Feed approx. 1.1 kW Height adjustment 0.25 kW Sanding belt dimensions: 1150 x 2500 mm Max. workpiece thickness: 150 mm Machine width: 1700 mm Machine length: 2000 mm Machine height: 2160 + 150 mm Machine weight: 1900 kg Constant working height: 850 mm Extraction connector: belt 180 mm / brush 120 mm Suction air volume: 0.74 m³/s Connected load: 23 kW Compressed air supply: 7 bar Feed speed: 3-15 m/min. Operating hours: 7000 h Location: Nattheim Cedex Twcpspfx Ailorh

Year of construction: 1997, condition: excellent (used), machine/vehicle number: 1095, Dear Customers Currently we offer you a universal milling machine for the model and mold making of the brand Zimmermann. Here are the technical data of the machine: Work table: 630 x 490 mm Support table: 490 x 400 mm Round movement: 360 ° Pivoting: 2x 90 ° Tension groove: 14 x 25 mm Power: 1,1 kW Speeds: 560 - 14,000 rpm Tool holder: ISO30 / SK30 - Motorbrake - motor-driven height adjustment - digital read-out with Heidenhain meassuring system - cabinet Crsdpfx Aioxy Ntqoloh Space required: 1,400 x 1,520 x 1,970 mm Weight: 790 kg The machine was cleaned completely including the support table. The technical as well as optical condition of the machine is top! We look forward to your questions and inquiries.

Condition: used, mileage: 99,000 km, first registration: 10/2014, fuel type: diesel, overall weight: 2,205 kg, color: yellow, gearing type: mechanical, emission class: euro4, Equipment: ABS, central locking, electronic stability program (ESP), soot filter, Please, no emails – due to time constraints, we are unable to respond to them. No emails – cannot be processed for time reasons. Price depends on: - Mileage - Date of first registration - Optical condition - Technical condition - TÜV (German vehicle inspection) due - TÜV – 1 year - TÜV – new - Service due - Service – new Cedozy T Sqopfx Ailerh - 1-seater - 2-seater Please, no emails – due to time constraints, we are unable to respond to them. Thank you for your understanding! ---- Opening hours and further information: Viewings and purchases are possible without prior registration: MON – THU: 9:00 a.m. to 4:00 p.m. FRI: 9:00 a.m. to 1:00 p.m. SAT: 9:00 a.m. to 12:00 p.m. Address: Tabakried 11 84076 Pfeffenhausen Please, no emails – due to time constraints, we are unable to respond to them. Thank you for your understanding! For questions, please contact Christian Hirsch: or our friendly staff. ---- We speak German / English. ---- Large selection of Volkswagen Transporter & Caddy models. New deliveries daily! ---- More information available at: More Information Opening hours: ----Price depends on: - Mileage - Date of first registration - Optical condition - Technical condition - TÜV (German vehicle inspection) due - TÜV – 1 year - TÜV – new - Service due - Service – new - 1-seater - 2-seater - Advantages of truck registration: - Low vehicle tax - Tax benefits (no 1% rule) - NO driving ban on Sundays - Can be driven with a standard car driving license Equipment: - Airbag - ABS - ESP - 2 sliding doors (LEFT + RIGHT) - Central locking / remote control - Electric windows - Electric mirror adjustment - Parking aid - Power steering - Seat height / steering wheel adjustable - Tinted windows - Through-loading (2.65m - 2.95m) with or without passenger seat - Rear window wiper - Rear window heating - SERVICE BOOK MAINTAINED -> REGULARLY MAINTAINED AT A VOLKSWAGEN AUTHORIZED WORKSHOP For questions: Automotive Engineering Master Technician: Christian Hirsch Information provided on the internet are non-binding descriptions. They do not constitute guaranteed characteristics. The seller is not liable for typographical and data transmission errors / changes / input errors. Errors and prior sale are reserved.

Condition: reconditioned (used), cut-off saw 3 KW Spindle diameter 50 mm Spindle length 300 mm Number of tools variabel St. Control CNC Dimensions (L/W/H) 2500x1700x2100 mm weight 1700 kg HABERKORN - FZS-2 Electronic Slotting Machine with Stepless Slotting Spindles and Automatic Roller Table ----- Crosscut Saw ----- Spindle Positioned at the Top Three-Phase Motor 3 KW Spindle Diameter 30 mm Speed ??2800 rpm Saw Blade Diameter 400 mm * Automatic Brake with Speed ??Monitoring * Stepless Saw Positioning with Siko Display * Guard and Extractor Hood with 100 mm Diameter Extractor Nozzle 2 Slotting Spindles 50 mm Diameter ----- Power 2 x 7.5 KW Speed ??4200 rpm Spindle Diameter 50 mm Max. Tool Diameter Approx. 360 mm Usable Length 300 mm * Both slotting spindles can be positioned via ball screw * Freely programmable 19 programs, display with function keys * Protective and extraction hood with 180 mm diameter extraction nozzle * Automatic brake with speed monitoring Studio table ----- * Swivel range +/- 65° * Automatically changing counter wood (programmable) * Pneumatic clamp * High-precision electrical degree indicator * Automatic length compensation Cedpswgwlkjfx Ailerh * Counter wood at any angle setting in the cutting plane Special features ----- Continuously adjustable roller table feed Laser for workpiece positioning Manual length stop LA 2000 Length 2500 mm Extraction nozzle diameter: 2 x 180 mm for slotting spindles 1 x 100 mm for crosscut saw ----- Price of the above-mentioned machine upon request! ----- Images show the same model. Original images not yet available. (Technical specifications according to the manufacturer - no guarantee!) All prices quoted are net, plus statutory VAT.

Condition: good (used), axle configuration: 3 axles, first registration: 09/2016, loading space volume: 90 m³, suspension: air, color: red, Year of construction: 2016, Make axles: SAF Empty weight: 7.300 kg Crjdjx Eb Ukepfx Ailoh Carrying capacity: 31.700 kg GVW: 39.000 kg Technical condition: good Visual appearance: good Please contact Arie or Pedro for more information = Additional options and accessories = - Air suspension - Disc brakes - EBS

Condition: new, maximum load weight: 30,840 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 13,530 mm, loading space width: 2,480 mm, loading space height: 2,750 mm, loading space volume: 92 m³, total length: 14,040 mm, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2026, Equipment: ABS, Brand new Knapen 3-axle SANH sliding floor trailer with electric roll cover, available from stock! * BPW 9-ton ECO Air HD rigid axle with disc brakes 430, 10-bolt, ET-120 * TireCheck tire pressure monitoring system * Smart Board * A-axis lift axle including starting aid * Steel rims with rim size 22.5" x 11.75 * Krone TRUSTED KT 231 385/65R22.5 164J 3PMSF * Gearbox-supported winch with push compensation, pivoting mud flaps * Plastic toolbox 1000x500x500mm * Water tank 28 L with soap dispenser * Long aluminum ladder * Extendable stairs with platform at the rear of the trailer * Broom and shovel holder * CARGOFLOOR CF-500 SL-C system, electric operation * Ribbed aluminum floor boards, 10 mm, 21 boards * Wear plates on the ends of the floor profiles, 350 x 3 mm Crjdpfx Aiez Iuw Ueljh * Stainless steel plate at the rear, under the floor * Platform on the front wall with ladder and safety switch to interrupt the power supply to the electric roll cover * Moving bulkhead * Rear doors with external locking bars * One locking bar per rear door * "A" sign (vertical hinge line) on the left rear door * Electric roll cover POWERSHEET, with remote control * Tarpaulin 900 gr./m2 * 3-position tarpaulin supports (4 pieces) * Side wall protection tarpaulin mounted in the welt on the left side wall, including fixed roll-fix operation at the front, color: dust gray, RAL 7037 * 2 ECOLED III rear lights, completely LED * LED side marker lights flash simultaneously with the turn signal * 3 pairs of additional work lights * Acoustic reversing warning * Remote control for floor, lift axle, and work lights * Hydraulic connections on the front wall and at the kingpin supports * Air connection 7.2 mm, "workshop connection" * Tarpaulin similar to RAL 9006 WHITE ALUMINUM * Superstructure RAL 7011 IRON GRAY * Chassis galvanized, not painted * A-frame painted in RAL 7011 IRON GRAY

Condition: used, empty load weight: 370 kg, first registration: 10/2004, next inspection (TÜV): 06/2027, Year of construction: 2004, mileage: 1,001 km, gearing type: other, driver cabin: other, Vehicle location: Bovenden, L: 5055 W: 2080 H: 0840 Maximum axle load up to 1500 ZU 15.1 +15.2: also known as 195/50B10-98L A. LM-WHEEL trailer type XX BK01, 6J-X10, ET-4* 1st owner, inspection valid until July 2027 Cjdpfjwyvzdjx Ailerh ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale and errors excepted!

Condition: excellent (used), Year of construction: 2023, color: grey, NEW! Container 10m³ / 10 cubic meters With French door. Length: 5.5 meters Width: 2.28 meters Height: 0.8 meters Crsdpfezldrxox Aileh Hook height: 1.45 meters Cevoman bvba. Lenskendijk 5 2200 Herentals Belgium

Condition: ready for operation (used), Year of construction: 1999, travel distance X-axis: 300 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 250 mm, Vertical milling center Chiron FZ08W Fanuc 21i-M Max RPM: 15,000 rpm High-pressure spindle through-cooling X = 300 mm Y = 250 mm Z = 250 mm The machine was originally supplied with 2 x 4th axis Peiseler RT 100, but the 4th axes have now been removed. Tool interface: HSK 32 ATC: 24 positions Serial: Yrzzng Machine is currently in production and can be inspected at any time. Credpfx Aiexd T Rzslsh The machine is in very good technical condition. I offer a 3-month startup warranty.