Used Gearbox 1:30 for sale (90,289)

Condition: repair required (used), Year of construction: 2007, operating hours: 67,367 h, functionality: not functional, machine/vehicle number: W288, repeat accuracy: 0.01 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 200 mm, positioning accuracy: 0.01 mm, workpiece weight (max.): 3,000 kg, type of input current: three-phase, input voltage: 250 V, sheet thickness aluminum (max.): 100 mm, table length: 3,000 mm, operating speed: 6,000 mm/s, table width: 1,500 mm, tank capacity: 5,500 l, pressure: 3,600 bar, positioning speed: 60 m/min, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 2 m/min, table height: 1,000 mm, operating pressure: 3,600 bar, year of last overhaul: 2024, waste water connection: 50 mm, input frequency: 50 Hz, power: 120 kW (163.15 HP), controller manufacturer: Bystronic, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, Equipment: safety light barrier, Bystronic Byjet 3015 Waterjet. This machine has a 3000 x 1500 cutting table up to 200mm thickness, complete with two cutting heads. Fsdpfezlt Ayex Ak Uspl The waterjet is powered by a Bypump 50 APC hydraulic unit. This machine was regularly serviced by a Bystronic service engineer. This machine is being sold as as a spare parts machine, but could be easily put back in production. It has a new hydraulic pump fitted shortly before it was taken out of production. It comes complete with a chain conveyor with paddles for the automatic removal of used garnet from the cutting beds. It also comes with an air blower and reservoir tanks for the raising and lowering of the water levels in the cutting bed for reducing the noise levels during the cutting process.

Year of construction: 2004, condition: good (used), Spritzgiessmaschine bis 5.000 KN Machine type: Krauss Maffei KM 2300-12000 MC Year: 2004 Control: CNC MC4 Working hours: 93.900 h SPECIFICATIONS Closing unit Closing force: 23,000 kN Maximum tool opening force: 1,420 kN Thrust force of the movable plate (opening): 227 kN Clamping force of the movable platen (closing): 203 kN Tool clamping area (H x W): 2,830 mm x 2,400 mm Stand spacing (H x W): 2,000 mm x 1,600 mm Tool opening stroke: 2,600 mm Min. tool height: 1,100 mm Maximum tool height: 1,800 mm Maximum tool spacing: 3,700 mm Fpjdpfjzi Sfzjx Ak Uol Hydraulic ejection stroke: 350 mm Ejector force (forward/reverse): 415/115 kN Screw diameter: 135 mm L/D ratio: 23 Injection pressure: 1,389 bar Displacement: 8,588 cc Projectile weight (PS): 7,815 g Injection capacity: 1,019 cc/s Screw speed: 113 rpm Maximum plasticizing capacity: 191 g/s Nozzle pressure: 241 kN Electrical and hydraulic equipment Rated power of the pump motor: 132 kW Installed heating capacity: 997 kW Adjustable cylinder heating zones: 7 Number of drying cycles: 350 per hour Tank capacity: 2,500 L Dimensions and Weight Machine dimensions: 15.15 m x 4.15 m x 3.29 m Total weight of the machine: 143,000 kg Maximum mold weight: 62,000 kg LRX 1000 Robot X-Axis: 2.000 mm Y-Axis: 3.000 mm Z-Axis: 5.000 mm

Condition: used, functionality: fully functional, Year of construction: 2003, operating hours: 53,000 h, control type: CNC control, controller manufacturer: Siemens, controller model: Sinumerik 840 D, laser type: CO₂ laser, laser power: 3,200 W, punching diameter: 76 mm, sheet thickness steel (max.): 8 mm, Equipment: cooling unit, documentation/manual, dust extraction, emergency stop, quick-change device, safety light barrier, Special equipment: + 2000 on Laser TruFlow 3200 + Blow-out device for small parts + Thread forming function with thread former breakage monitoring + MultiShear function + Slitting function + Marking/Fast chamfering function + Softpunch function + Re-punch cylinder + Vibration-damped mounting + Chip conveyor with tilting container + Additional clamping arm Manufacturer's standard description: Standard equipment: - Hi-Las high-pressure cutting - Laser cutting head with 5'' lens - Laser cutting head with 7.5'' lens - Cutting head quick-change system - Programmable cutting gas selection/pressure setting - Capacitive height control Dias III - Function: ContourLas - Slag cone detection - Compact dust extractor - Tank heater - 18 tool cassettes - 18 die plates - Automatic tool changer with 19 stations - 2 clamping arms - Rotation of all tools - NC-controlled, digital, maintenance-free three-phase drives - Automatic re-punching - Tool length compensation - Fast shutdown of the hydraulics - Automatic shutdown - 2 automatic dividing slides for parts 500 x 500 mm each - Sensors for both dividing slides - 2 scrap bins - Punch scrap extraction - Forming capability - Programmable stamping tool lubrication with 2 containers - Programmable pressure plate - Adaptive stroke length control - Safety devices - Remote diagnostics system - RJ 45 network connection - 3.5'' floppy disk drive Fpedpfx Aozdc Hmok Ujl - Comprehensive operating manual

Condition: used, mileage: 835,500 km, power: 220 kW (299.12 HP), first registration: 09/2010, fuel type: diesel, number of seats: 31, gearing type: automatic, emission class: euro5, color: white, Equipment: ABS, air conditioning, electronic stability program (ESP), soot filter, In accordance with our "General Terms and Conditions," without any guarantee or warranty, we can offer you the following vehicle on a non-binding basis, subject to finalization, errors, typographical errors, and prior sale: Fpjdpezztrajfx Ak Uol Mercedes Benz Citaro NF O530 bus, 31+57+1 (Vehicle No. 316) First registered: September 27, 2010 835,500 km Engine: 11,967 ccm 220 KW / 352 hp Euro 5 EEV Permissible gross vehicle weight: 18,000 / 20,900 kg Unladen weight: 11,789 kg Payload: 6,211 kg Front axle load: 7,245 kg, Rear axle load: 11,500 kg Overall length: 11,950 mm, Overall width: 2,550 mm, Overall height: 3,400 mm 31+57+1 seats (sitting/standing/wheelchair/stroller) Ramp at the second double door for strollers and wheelchairs Air conditioning, heating, auxiliary heater Double doors at the front and rear Microwave Fully automatic transmission LAWO (system) No cash register Radio/CD Electric windows Emergency exit Electric mirrors + mirror heating Engine slightly oily, air dryer malfunction, air dryer cartridge needs to be replaced, various signs of wear and tear, consistent with its age Not a new vehicle, the vehicle was in regular service until it was deregistered Full air suspension Full automatic Tires: 275/70R22.5, front approx. 40/80%, rear approx. 30/30%, inside approx. 40/40% Price: €7,500.00 (net) All information is provided without any guarantee or warranty. Our "General Terms and Conditions" apply. The place of jurisdiction for both parties for disputes up to a value of €10,000 is the Ludwigslust District Court; for disputes exceeding this value, it is the Schwerin Regional Court. Subject to errors, typographical errors, and prior sale.

Condition: excellent (used), Year of construction: 2013, operating hours: 55,200 h, functionality: fully functional, machine/vehicle number: A0035A0294, Machine type: TruPunch 3000-1300 (S11) TruPunch 3000-1300 (S11), medium format 1250/2500 We are the first and only owner of the machine. Machine with complete history and service documentation. Machine is in fully working order and in continuous operation. Technical data: Width 6500 mm Depth 6203 mm Height 2252 mm Max. punching sequence (E = 1 mm) 1000 1/min Max. punching sequence – marking 2500 1/min Punching mode, X-axis 2500 mm Fpjdpfozd U D Nox Ak Ujl Punching mode, Y-axis 1250 mm Max. sheet thickness 6.4 mm Max. workpiece weight 160 kg Max. punching force 180 kN Multitool tool change time 0.3 sec Number of tools/sheet clamps | 18 pcs / 2 pcs Max. part size, part flap when punching 500 mm x 500 mm Max. part size, rigid slide for punching (with sliding table) 80 mm x 50 mm Average power consumption with active automatic shutdown 0.3 kW Average power consumption during production 5.6 kW Additional, non-standard machine equipment: 1) Thread forming function with thread counter and thread forming tool damage control: chip-free thread forming is possible in both structural steel and stainless steel and aluminum. The threading tool is mounted like all other tools in the head. Thread size to be machined ranges from M 2.5 to M10. A thread sensor enables control of the threading tool damage. User-friendly operation, including lubricant level control. 2) Marking/surface embossing function: fast marking using appropriate tools. High-quality knurling can be performed at high speed. 3) Lowerable die: the lowerable die enables scratch-free processing because it moves downward when positioning the sheet metal. 4) Additional clamping device: recommended for processing very thin sheets and when using roller tool machining technology. An additional 2 clamping devices can be installed. In combination with the SheetMaster Compact, a third clamping device is recommended. 5) 3 x Option - vertically movable clamping device: the clamping devices move vertically (maximum stroke 12 mm); enables direct processing of the sheet metal at the clamping devices. This option reduces scratches from high forming dies. 6) Sensor in the slide for small parts: control of the slide for small parts (included in the "Nibbling-free machining" option). 7) Second locating pin: the pin is located on the outside on the right side. 8) RTC tool cassettes: 17 tool cassettes with die plates, enabling quick machine retooling. 9) Brush table with unloading and loading assistance: a brush table is recommended for processing particularly delicate materials. Vertically moving balls embedded in the table facilitate the loading and unloading process. We invite you to contact us.

Condition: used, Year of construction: 1974, operating hours: 10,000 h, functionality: fully functional, machine/vehicle number: 8002/6410, drilling depth: 1,000 mm, drill diameter: 30 mm, type of input current: three-phase, spindle motor power: 21 W, table length: 1,000 mm, input voltage: 550 V, mount diameter: 160 mm, number of spindles: 1, drilling capacity: 1,000 mm, quill diameter: 30 mm, Equipment: rotational speed infinitely variable, Deep hole drilling machine for up to 1000 mm and 30 mm diameter, used for drilling aluminium, regularly serviced, includes a significant quantity of drills. Machine is fully operational and in continuous use. Siemens control, Simatic PANEL, documentation available. Fpodpfsx Ehg Tox Ak Uol

Condition: refurbished (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 019.3790, Machine undergoing repair/overhaul = estimated delivery time approximately 8-10 weeks. Fedozbqzajpfx Ak Uopl Technical data + accessories, see separate PDF.

Condition: excellent (used), Year of construction: 2003, MANZONI Transfer Press Type: T6302MR/2/12/TE Year of manufacture: 2003 Press force: 6,300 kN Stroke rate: 10-45 strokes/min Stroke: 600 mm Ram adjustment: 200 mm Table area: 4,100 x 1,700 mm Ram area: 4,000 x 1,700 mm Fsdpfozy Hb Ssx Ak Uepl Installation height: 1,100 mm Transfer distance: 0-800 mm Opening/closing distance per slide: 150 mm Lifting stroke: 150 mm Distance between gripper slides, closed: 500-1000 mm PBK strip feeding system Strip thickness: 0.2 - 3.5 mm Strip width: 120 - 1,200 mm Coil capacity: 10,000 kg

Condition: like new (used), Year of construction: 2024, ROBOTIC ARM BRAND: KUKA MODEL: KR 30 R2100 / SEL TECHNICAL DESCRIPTION PAYLOAD: 30 KG MAX. REACH: 2100 MM YEAR OF MANUFACTURE: 2024 CONTROL UNIT: KRC5 SOFTWARE: KSS 8.7 OPTIONS: Fpjdpfjzym Rtox Ak Uel KRC 5 dualcab BA C5 dualcab AC SPB USB KSI

Condition: used, Year of construction: 2000, machine/vehicle number: 990101, total length: 6,400 mm, total width: 2,200 mm, total height: 2,300 mm, overall weight: 18,500 kg, Heavy Duty Lathe Seiger SLZ 1200 x 3000 with Siemens Sinumerik 810D Cycle Control (Teach-In) The heavy duty lathe Seiger SLZ 1200 x 3000 is equipped with a Siemens Sinumerik 810D cycle control (Teach-In). The machine was most recently used as a faceplate and frontal lathe and therefore operated without a tailstock and without steady rests. However, the machine can still be structurally equipped with appropriate steady rests or a tailstock and used for classic center work. Configuration with AC main drive, large faceplate, hydraulic unit, separate control cabinet, and 2 chip conveyors. Working Area Distance between centers: 3,000 mm Swing diameter over bed: 1,200 mm Swing diameter over cross slide: 850 mm Cross slide travel: 620 mm Bed width: 750 mm Spindle Spindle nose: DIN 55027 size 11 Spindle diameter front bearing: 190 mm Spindle bore: 104 mm Speed range: 5 – 900 min⁻¹ Max. torque: 6,000 Nm Main Drive Drive power: 37 / 52 kW (100% / 60% duty cycle) Feed X-axis feed force: 24,000 N Z-axis feed force: 16,000 N Rapid traverse X: 7 m/min Rapid traverse Z: 4 m/min Tool Holder Turning tool cross-section: 40 × 40 mm Electrical Data Supply voltage: 400 V Frequency: 50 Hz Max. current consumption: 200 A Workpiece Weights (Manufacturer specifications for standard configuration) Between centers without steady rest: 5,000 kg Between centers with 1 steady rest: 6,000 kg Between centers with 2 steady rests: 7,000 kg Flying in faceplate: 1,800 kg Chip Conveyor 2 x AME Chip Conveyors Manufacturer: AME GmbH, Emsdetten Type: S8 300 Tlg. 63 Year of manufacture: 05/2016 Not Included: Tailstock Fedpfxezdd E Ro Ak Uspl Steady rests Note The machine was most recently used as a faceplate or frontal lathe. Therefore, neither a tailstock nor steady rests are currently available. The machine is particularly suitable for machining large disc, ring, and flange workpieces. A later retrofit for use between centers is fundamentally possible. Serial number: 990101 Tip width: 3000 - mm Turning diameter max.: 850 mm Control: • Siemens Sinumerik 810D Weight approx.: 18,500 kg Dimensions (LxWxH) approx.: 6400 x 2200 x 2300 mm Year of construction: 2,000 Condition: in working order Terms of payment: 100% prepayment before pick-up Terms of delivery: From foundation under power: No

Condition: good (used), Year of construction: 1982, machine/vehicle number: 11.809, Offer 25079 Technical specifications: - Max. working width 3100 mm - Max. cutting capacity - at 400 N/m² strength 13 mm - at 700 N/m² strength 10 mm - Cutting angle 1° 30' - Cutting gap adjustment via hand lever - Number of hydraulic hold-down clamps: 14 - Motorized backgauge - Electric foot switch Fpodpjv Nkdmofx Ak Usl - Front angle stop - Stroke rate 15 per minute - Drive 380 V / 22 kW - Table height 800 mm - Space required including backgauge, without front support arms - Approx. W 3400 x H 2250 x D 2150 mm - Weight approx. 12000 kg

Condition: used, mileage: 861,837 km, power: 220 kW (299.12 HP), first registration: 09/2010, fuel type: diesel, number of seats: 33, gearing type: automatic, emission class: euro5, color: white, Equipment: ABS, air conditioning, electronic stability program (ESP), soot filter, In accordance with our "General Terms and Conditions," without any guarantee or warranty, we can offer you the following vehicle on a non-binding basis until completion of the sale, subject to errors, typographical errors, and prior sale: Mercedes Benz Citaro NF O530 Bus 31+57+1 (Vehicle 311) First registration: 20.09.2010 861,837 km Engine: 11,967 ccm 220 KW / 352 HP Euro 5 EEV Permissible gross vehicle weight: 18,000 / 20,900 kg Unladen weight: 11,789 kg Payload: 6,211 kg Axle load front: 7,245 kg, axle load rear: 11,500 kg Overall length: 11,950 mm, overall width: 2,550 mm, overall height: 3,400 mm 33+57+1 seats (sitting/standing/wheelchair/stroller) Ramp at the second double door for strollers and wheelchairs Air conditioning, heating, auxiliary heater Double doors front and rear Microwave Fully automatic transmission LAWO system No cash register Radio/CD Electric windows Emergency exit Electric mirrors + mirror heating Engine slightly oily, display indicates battery charging failure, carbon brushes on one alternator defective, second alternator charging Various signs of wear, consistent with age Not a new vehicle, was in regular service until deregistration Full air suspension Fully automatic system Tires 275/70R22.5, front approx. 40%, rear approx. 30/30% Fedpozztq Aefx Ak Ujpl Price: €7,500.00 (net) All information is provided without any guarantee or warranty. Our "General Terms and Conditions" apply. The place of jurisdiction for both parties is the Ludwigslust District Court for disputes up to a value of €10,000, and the Schwerin Regional Court for disputes exceeding this value. Subject to errors, typographical errors, and prior sale.

Condition: good (used), Year of construction: 2000, functionality: fully functional, working width: 1,300 mm, passage height: 200 mm, power: 63 kW (85.66 HP), input voltage: 400 V, input frequency: 50 Hz, the machine is in good condition. Fpodey Tm Aljpfx Ak Uel

Condition: excellent (used), Year of construction: 2008, Arburg 520S 1300-800 / machine in very good technical condition Year of manufacture: 2008 injection unit: screw diameter: 50 mm injection weight: 359 g Injection pressure: 2000 bar Metering volume: 392 ccm Clamping unit: clamping force: 130 t tie bar distance: 520x520 mm size of clamping platens: 695x695 mm ejector: hydraulic clamping unit: hydraulic Fodpszy I Hcsfx Ak Uspl Control system: SELOGICA - touch screen Additional equipment: Machine in very good technical condition Euromap 67 Euromap 12 Robot interface Air valve x 2 injection unit hardened - bimetal The machine was regularly serviced by the authorized service Arburg in Germany Dimensions: Weight: 6450 kg Length/width/height: 4.81x1.57x2.19 m Drive: Pumps/motor: 30 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: good (used), Year of construction: 2001, Year: 2000/2013 Since rebuilding by Müller Martin only 5.600 Consisting of: Gathering machine Müller Martini 3681 Description: - Chain tensioning station - Number of gathering stations: 8 - ASIR Automatic Signature Image Recognition - ASAC automatic self adjusting calliper - Pump Fpodpfx Aezg E Idjk Usl - Set up element: 3641 - Reject gate for incomplete products:3617 - Intermediate element with vibrating: 3643 - 2x - Transfer into the binder Perfect binder Müller Martini Corona C18-41 Year: 2001/2014 Description: - 31 clamps - Semi automatic setting - Commander with touch screen - Main milling station - 1st spine preparation station - 2nd spine preparation station - Brushing station - Excluding dust extraction system, machine has centralised dust extraction system - Base for 1st spine glue system - 1st hotmelt spine glue unit, interchangeable - Premelter for spine glue unit: ICS C80 - Base for 2st spine glue system - Base for side glue system - Hotmelt side glue unit, interchangeable - Premelter for side glue unit - Stream cover feeder - Scoring station - Pump - Nipping and pressing station - 2nd nipping and pressing station - Lay down device - Quako-quality control New in 2013 Transport system New in 2013 - Escape delivery Three knife trimmer Müller Martini Zenith S (3672) Description: - Semi automatic setting - Left hand infeed - Precounter stacker - Knife pre-setting device - Sets of knives: 2 - Exchangeable cutting tables (standard set): 4 – 17 Book stacker Müller Martini CB 12 Description: - Compensating stacker - Delivery to the left Option not in price included - Stream feeders - Müller Martin 3605 book block saw with turnoverbelt - Palletizer

Condition: good (used), Year of construction: 1990, functionality: fully functional, ORMA Hydraulic Frame Presses DE 30/18 Manufacturer: Orma Machine Italy Year of manufacture: 1990 Maximum working dimensions: 3000 x 1800 mm Maximum working depth: 90 mm Vertical pistons: 2 Maximum piston pressure: 2000 kg Horizontal pistons: 2 Motor: 0.55 kW Width = 850 mm Length = 3700 mm Height = 2310 mm Features: Fpedpfxov Iv Sgs Ak Ujl Robust frame Easy adjustment and adjustment of the orthogonality and parallelism of the cross members Working accuracy Easy locking and control of the double-acting pistons Installation for small workshops and for assembling and aligning various components such as doors, windows, louvre doors and windows, simple frames, etc. The pistons are oil-driven.

Condition: good (used), Year of construction: 2004, Koenig bowl tipper - HK 1100/3000 model - lifting height - function for removing dough from the bowl - the machine worked with the I-Rex divider and Sancassiano mixer - used - year of construction ca. 2004 - good technical condition - price 4,000 € EXW Fodpfx Aozh H Tkjk Ujpl

Condition: used, Year of construction: 1989, plate thickness 3 (VA), 4 (ST 40) mm cutting angle adjustment 30 - 120 ° cutting length 200 mm throat 300 mm table height 900 mm work stroke max. 40 mm no. of strokes max. 40 Hub/min total power requirement 4 kW weight of the machine ca. 2.000 kg dimensions of the machine ca. 1500x1300x1400 mm Fjdpfx Akoyv Nz As Uepl

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, collet bore: 38 mm, turning diameter over cross slide: 60 mm, spindle bore: 38 mm, feed length X-axis: 300 mm, feed length Z-axis: 286 mm, spindle speed (max.): 6,000 rpm, overall weight: 1,900 kg, Precision lathe DMG MORI WASINO G 100 / 300 Year of manufacture: 2017 Control system: Fanuc (DMG Compact line) Travel distances: X-axis: 300mm Z-axis: 285mm Main spindle speed: 0 - 6,000 rpm Bar diameter: 38mm Accessories: - Electronic handwheel Fpjdpozwcqwofx Ak Uel - Coolant system - Fire extinguisher - 3x driven tool holders Machine has only been operated under oil lubrication. Accuracy as when delivered!

Condition: new, Year of construction: 2022, SICK S30B-3011BA Safety Laser Scanner Features Design sensor without system connector Indoor application area Protective field range 3 m Warning field range 8 m (at 15 % remission) Distance measuring range 30 m Type of field set Triple field sets Number of field sets 1 Number of fields 3 Number of monitoring cases 1 Scanning angle 270 Resolution (configurable) 30 mm, 40 mm, 50 mm, 70 mm, 150 mm Angle resolution 0.5° Response time 80 ms 1) Protective field allowance 100 mm Number of multiple evaluations 2 ... 16, configurable Delay of automatic reset 2 s ... 60 s, configurable Safety characteristics Type 3 (IEC 61496) Safety integrity level SIL2 (IEC 61508) Category Category 3 (EN ISO 13849) Performance Level PL d (EN ISO 13849) PFHD (mean probability of dangerous failure per hour) 8.0 x 10-8 TM (service life) 20 years (EN ISO 13849) Function Restart interlock ✔ Contactor monitoring (EDM) ✔ Fpjdjpudtlopfx Ak Uol Multiple evaluation ✔ Contour as reference ✔ Integrated configuration memory ✔ Measurement data output Measurement data output Via RS-422 Secure SICK device communication via EFI ✔ Connection type Connection type System connector with or without connecting cable Universal I/Os 5 1) Inputs Contactor monitoring (EDM) 1 2) Reset/restart 1 2) Stand-by 1 Outputs OSSD pairs 1 Signal outputs 3 3) Type of configuration PC with CDS (configuration and diagnostics software) Configuration and diagnostics interface RS-232 Transmission rate 38.4 kBaud Data interface RS-422 Transmission rate ≤ 500 kBaud Secure SICK device communication via EFI Transmission rate ≤ 500 kBaud Cable length ≤ 50 m Conductor cross-section 0.22 mm² 1) Freely programmable, e.g. contactor monitoring input, reset input, contamination warning, reset required. 2) Availability depends on configuration of universal I/Os. 3) Freely programmable, e.g. warning field, contamination, reset required. Protection class III (EN 50178) EN 60950 Supply voltage Uv 24 V DC (16.8 V DC ... 30 V DC) Current consumption ≤ 0.33 A 1) ≤ 1,7 A 2) Outputs Safety outputs (OSSDs) 2 x 250 mA Signaling outputs 3 x 100 mA 3) 1) At 24 V DC without output load. 2) At 24 V DC with maximum output load. 3) Freely programmable, e.g. warning field, contamination, reset required. Item condition: new, from stock clearance (Without original packaging) Year of manufacture 2022 Financing through our bank is also possible. komplett-konzept.leasingo.de More scanners - new and used - you will find in our store! International shipping costs on request!

Condition: excellent (used), Year of construction: 2016, Mazak Optiplex 3015 Fiber 4KW Laser Cutting Machine Manufacturer: Yamazaki Mazak Corporation Type: Optiplex Nexus 3015 Fiber 4KW Year of manufacture: 05/2016 Condition: used, very good, under power Availability: from May 2023 Operating hours: Time CNC AN 29.999h Time laser AN 15.653h Time automatic operation 11.839h Cutting time 28,708h Total cutting time 6,665h CNC control: MAZATROL PREVIEW 3 Weight: 15000 kg Travel: 3,100mm x 1,580mm x 110mm Power requirement: 54 kVA. GENERAL MACHINE OPTIONS 1 set of adjustment tools Support grid (distance of the bars 100mm) Automatic calibration device Non-contact height sensing with repeat function Nozzle cleaning brush Focus position adjustment Manual workpiece clamping Machine feet / leveling shoes Machine status indicator light NC monitoring for shielding gas pressure without resonator Programming function on the control unit via fixed programs Collecting container for material waste 6981NO612 Cutting table layer detection Transformer for the European market Additional selector switch for cutting gas CUTTING HEADS Multi-Control cutting head Lens for Multi-Control cutting head Cassette for focus lens Multi-Contro cutting head Protection window for Multi-Control cutting head 5 pieces NOZZLES Mazak Hi-Acc Pencil Nozzle(Sgl)1.0,3.0Mm each 5 pieces Mazak Hi-Acc Pointed Nozzle (S)1.2,1.5,2mm each 5 pieces Mazak precision nozzle adapter (8 pieces) Fpsdpfeyucgujx Ak Uel AUXILIARY GAS LINES 3rd auxiliary gas line (30 bar) PAINTING Mazak standard color PROTECTIVE HOUSING Laser safety screen (5 pieces) SAFETY EQUIPMENT Work area lighting Machine with CE mark Preparation for dust separator FACTORY AUTOMATION Automatic switch-off via circuit breaker triggering The power supply is switched off at the end of a program. PALLET CHANGER 2-fold pallet changer. The next workpiece can be prepared during processing. NUMERICAL CONTROL 15″ Xga Color Tft monitor LAN interface Mazatrol Preview 3 control NC repeat function Relocation Detector USB interface for PC MACHINE MODEL Preparation for 4kW resonator GENERAL MACHINE OPTIONS Automatic nozzle change magazine with 8 slots Nozzle cooling function Fiber Laser Resonator 4kW incl. cable and cooling unit Intelligent monitoring + focus point detection Workpiece lifting table (CE) PERIPHERAL EQUIPMENT INCLUDED Extraction unit for Donaldson DFPRO4 laser cutting machine DOCUMENTATION Set of manuals in electronic form on CD

Condition: used, Year of construction: 2013, HEDELIUS C50 C50/40/530/1800/8 Machining Center ==> Spindle running time: 8,997 h Manufacturer: HEDELIUS Model: C50 Year of manufacture: 2013 Control system: Heidenhain Machine weight: approx. 5,500 kg Technical data Travel in X: 1,800 mm Travel in Y: 510 mm Travel in Z: 480 mm Table size: approx. 2100 x 510 mm Feed rate: up to 8,000 mm/min Spindle speed: up to 30,000 rpm Spindle running time: 8,997 h Program running time: 10,446 h Equipment Heidenhain CNC control system Fully enclosed machining center Central lubrication system Fpjdpfx Aszc Rctsk Uel Coolant system Electronic handwheel Tool magazine Documentation available Description The machine is in very good condition and can be inspected while powered on after prior arrangement. With an X-axis of 1800 mm, the machine is ideally suited for machining long workpieces in tool, machine, and fixture construction. The comparatively low spindle running hours of only 8,997 hours are particularly noteworthy. The machine has a Heidenhain control system and reaches spindle speeds of up to 8,000 rpm. The HEDELIUS C50 stands for high precision, stability, and reliability "Made in Germany" and is ideally suited for both single-part and series production. Inspection: Possible by appointment in Bremen. _____ Subject to prior sale and errors in the technical specifications. The technical specifications have been compiled to the best of our knowledge, but do not constitute guaranteed characteristics. Our general terms and conditions apply; in addition, the seller is not liable for typing or data transmission errors. The appearance of the offered items corresponds to their age and the images shown. The technology and wear of the offered items are in accordance with their age. Used machines are sold exclusively to commercial enterprises and without warranty.

Condition: good (used), Year of construction: 1991, Table saw Manufacturer: SCM Type: T 130 Year of manufacture: 1991 Table: 1200 x 730 mm Power: 4 kW Spindle: 30 mm Reversible rotation Fpsdozhlrrspfx Ak Ujl Including feed mechanism

Condition: refurbished (used), Year of construction: 2007, VIDEOS AVAILABLE ON REQUEST UNION CBFK 130/2 CNC Table Type Horizontal Boring & Milling Machine Fpodpfx Aozqbg Djk Uel Manufacturer: UNION Gera (VEB Werkzeugmaschinenfabrik UNION Gera) Model: CBFK 130/2 Control: Heidenhain CNC Machine type: CNC Table Type Horizontal Boring & Milling Machine Travels X-axis: 3,000 mm Y-axis: 1,600 mm Z-axis: 1,275 mm W-axis (spindle quill): 400 mm B-axis (rotary table): 360° Table Table size: 1,600 × 2,000 mm Maximum workpiece weight: 7,000 kg Main Drive Main spindle motor: 32.4 kW Electrical Data Connected load: 80 kW Supply voltage: 380 V Frequency: 50 Hz Control voltage: 220/24 V Auxiliary voltage: 220/15 V Rated machine current: 150 A Recommended fuse: 200 A Operating temperature: 15–35 °C Machine Weight Approximate machine weight: 28.3 tonnes Year Originally manufactured: (not shown on plate) General overhaul: 2007 Machine Identification Model: CBFK 130/2 Serial number: 12266 Operating Hours (Heidenhain) Control ON: 112,694 h Machine ON: 100,869 h Program running time: 22,209 h Spindle running time: 18,280 h

Condition: excellent (used), Year of construction: 2004, Engel Victory 330/110 Tech / production line with robot Engel ER-HLI 41 and conveyor belt / machine in very good technical condition Year of manufacture: 2004 Injection unit: Screw diameter: 40 mm injection weight: 190 g Injection pressure: 1670 bar Metering volume: 201 ccm Clamping unit: clamping force: 110 t tie bar distance: 0x0 mm size of clamping platens: 790x680 mm ejector: hydraulic clamping unit: hydraulic Control system: CC 100 Additional equipment: Production line with integrated robot Engel ER-HLI 41 and conveyor belt. Tie-bar-less machine Hydraulic core puller x 1 Injection unit hardened - bimetal Machine serviced by authorized service Engel Machine with original protective housing to the robot and conveyor belt Dimensions: Weight: 7400 kg Length/width/height: 5.10x1.50x2.10 m Drive: Pumps/motor: 18.5 kW Fpodpozy Iqbsfx Ak Uel Heating power: 9,2 kW Total power: 27,7 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request