Used Flow Mach M500-2060 for sale (25,547)

Condition: good (used), Year of construction: 2011, Load moving system Blodpfewvhrtsx Amysk CBM 240 / ST 120 MACH-ID 923 Type: CBM 240 / ST 120 Year: 2011

Condition: good (used), Year of construction: 2015, Steering skate length:630mm Steering skate width:220mm Bljdpfx Aswvhpfomyok Steering skate hight:115mm Skate length: 630mm Skate width: 220mm Skate hight: 115mm Max. loading capacity:12T Wheel Ø: 85mm Wheel material: steel Hydraulic jacks: 2 Lifting range of foot:30 - 260mm Lifting range of head:420 - 650mm

Condition: good (used), through hole: 50 mm, three-jaw chuck diameter: 200 mm, Metal cutting Tooling CBT - 200 MACH-ID 3000 Make: CBT Type: 200 Bjdpfx Amozdifwoyslk Year: 2001 Diameter: 200mm 4 chuck: x Spindle bore:50mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), three-jaw chuck diameter: 200 mm, through hole: 55 mm, Metal cutting Tooling CBT MACH-ID 3001 Make: CBT Year: 2014 Diameter: 200mm 3 Chuck: x Spindle bore:55mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Blodpezdid Tsfx Amyok

Condition: excellent (used), three-jaw chuck diameter: 250 mm, through hole: 75 mm, Diameter: 250mm 3 Chuck: x Blodpfx Aszdidtomyjk Spindle bore:75mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2005, Eckold tool Blsdpfx Aezdglmsmyok ECKOLD - SW4T MACH-ID 3787 Make: ECKOLD Type: SW4T Year: 2005 Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, total height: 6,500 mm, 1x Pallet flow rack by Bito, fully functional. Capacity for 96 pallet positions. Year of manufacture: 2021. Basic dimensions: W 10.20 m - D 5.20 m - H 6.50 m. Pallet weight min: 250 kg, max: 1000 kg. Channel width / beam length: 2400 mm. The floor-level roller tracks are foldable for flexible cleaning access underneath (see picture no. 4). Blsdew Az Emepfx Amysk Inspected and serviced annually. The system is already dismantled and in storage. Europe-wide shipping available for an extra charge.

Condition: good (used), Eckold tool ECKOLD - KS 50 MACH-ID 3813 Make: ECKOLD Type: KS 50 Blsdpfx Ajzc I Eremysk Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2007, Eckold tool ECKOLD Bljdjzc I D Uepfx Amysk MACH-ID 3819 Make: ECKOLD Year: 2007 Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 2009, condition: used, For sale are 8 free-flow centrifugal pumps from Pumpenfabrik Wangen, manufactured in 2009. These are the ESP model. Five of the eight free-flow centrifugal pumps have a motor. Quantity: 5 / 3 with motor Length: 172cm (without motor) / 229cm (with motor) Height: 34cm Manufacturer: Pumpenfabrik Wangen Type: ESP No.: 920607 Year of manufacture: 2009 Connections: DN100 PN16 Motor: SEW Eurodrive Type: RF77DV100L4/TF Bodpfx Amega Dtcsyolk No.: 01.1280626601.0003.09 rpm: 1400/48 kW: 3/S1 V: 230/400 A: 11 / 6.30

Condition: new, Manufacturer: Wenglor Condition: New, without packaging Type: Flow sensor Model: FFAF209 Measuring principle: Calorimetric flow monitoring Medium: Liquids Bjdpfx Amszcw Snsyolk Output function: Switching output Electrical connection: M12 connector Supply voltage: 18–30 V DC Protection class: IP67 Housing material: Stainless steel Display: Integrated status and switching state indicator Application area: Monitoring of cooling circuits, pump systems, process plants, and industrial fluid applications Mounting type: Direct integration into pipelines and supply systems

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: PSP-26001, pressure: 0.4 bar, total width: 500 mm, total length: 500 mm, total height: 1,950 mm, overall weight: 75 kg, warranty duration: 3 months, manhole location: bottom, empty load weight: 50 kg, input voltage: 230 V, machine base height: 250 mm, type of input current: AC, volume flow: 0.15 m³/h, Equipment: documentation/manual, type plate available, Continuous-flow pasteurizer (throughput volumes depend on operating time, hygiene, and precision): • Performance and investment suitable for small on-farm dairies as well as local processing workshops: 700 liters in 6 hours. • Base of 50x50cm, 200cm high. Removable side guards. • Gravity-fed milk flow: provides stable flow and smooth regulation. The milk or juice is fed or pumped into an intermediate container at a height of 4 meters and flows from there to the bottling station. • A pump supplies this container at the elevated height. It also ensures effective cleaning through intense detergent circulation. • Manual control by the operator at the bottling station with alarms for "too fast" filling (incomplete pasteurization) or "too slow" filling (product overheated): the operator can then slow down or speed up the bottling process. • No contact with air: Hygienic and precise processing! • Only 2.2 kW of electricity to pasteurize more than 120 liters per hour (700 liters per day). Automatic control of the water bath temperature with a setpoint between 70 and 92°C (from thermization at 65°C to "cooking" for yogurt at 85°C). • The basic pasteurizer consists of: 1. a heat exchanger between the incoming (cold) milk (or juice) and the pasteurized milk (or juice) (72°C), 2. a heating tank (2.2kW, temperature adjustable to 5°C above the pasteurization setpoint) in which a coil is immersed, through which the liquid exiting the heat exchanger circulates, 3. a well-insulated holding tube where the milk/juice is kept for 15 seconds at the pasteurization temperature, 4. a temperature controller to illuminate a light if the liquid is too cold and another if the liquid is too hot, Bedszg Dlbspfx Amyelk 5. a tube leading to the elevated inlet container, tubes connecting all components, one or two tubes with a Mohr clamp for manual filling of bottles (optional bottling unit) or jars (one at a time), 6. a drain valve at the lowest point (after pasteurization and holding, and before returning to the heat exchanger): allows the circuit to be emptied down to the last drop of pasteurized product. 2. Transfer pump with controls: • Prevents the need to transport milk or juice by pumping it from where it is located (tank on a trailer, refrigerated tank, receiving tank, container, etc.) to the inlet tank of the pasteurizer on the upper floor. • Automatic pause when the inlet tank of the pasteurizer is full (conductivity probes). Automatic restart when the level drops. • Performance between 8 and 25 liters per minute (depending on the height difference). • Also ensures powerful cleaning of the entire pasteurization circuit. • Food-grade design and materials. • Electrical consumption of 400 W. • Option: 200µm basket filter for wort, juices, and herbal extracts with moderate alcohol content. 3. Option: "Manual gravity-fed bottling unit with automatic stop, 180 liters per hour": twice the throughput with less work!

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, Manufacturer: Wittmann Type: DF02TA Bsdpfx Amjzgw S Ueyjlk Double Price: 100 EUR

Condition: excellent (used), functionality: fully functional, working width: 2,060 mm, sheet thickness (max.): 3 mm, back gauge adjustment: motor-driven, Equipment: emergency stop, safety light barrier, Vimercati mechanical guillotine shear. - Cutting width: 2060 mm - Sheet hold-down cylinders: 11 units Bodpfx Aoxdr R Tsmyjlk - Maximum cutting thickness for steel with Rm 410 MPa: 3 mm - Maximum cutting thickness for steel with Rm 600 MPa: 2 mm - Pneumatic rear sheet support Machine is currently in operation and fully functional. Equipped with motorized back gauge with manual control and display showing cutting dimensions. Machine comes complete with added safety guards and an operation and maintenance manual.

Condition: ready for operation (used), AFC AFC-04 Advanced Flow Control AB . 12375 S.Nr. 257, used, minor signs of wear, 100% functional, scope of delivery as per photos. Blsdpfxjx Eqp To Amysk

Condition: ready for operation (used), AFC AFC-04 Advanced Flow Control AB SN:273 , the plastic sheathing is damaged on one connection socket, see photo, used, normal signs of wear, 100% functional, scope of delivery as per photos Bljdpfx Amjrv Npmeyek

Condition: ready for operation (used), AFC AFC-04 Advanced Flow Control AB SN:266, used, with normal signs of wear, 100% functional, scope of delivery as per photos. Bljdpfx Amex Eqqqeyek

Condition: ready for operation (used), Trumpf / Hüttinger 1456168 control box Flow 36-48kW SN: 200128104 - 13.56MHz E, used, in good condition, 100% functional, scope of delivery as per photos Bodpfjx Eu T Aox Amyolk

Condition: ready for operation (used), AFC AFC-04 10881 Advanced Flow Control AB, used, minor signs of wear, 100% functional, scope of delivery as per photos. Bjdpfxex Eqp Hj Amyjlk

Condition: used, Burkert fluid control systems flow meter Pipe size: DN 65 Control system type: SE 56-B1D1B1A40 Flow meter type: SO 56-T65-3A1B VMA Wekerom See our other ads Bljdpfswyfx Eex Amyjk

Condition: excellent (used), Available: immediately Bsdpfoh Eu S Rjx Amyslk

Condition: excellent (used), Several HB-Therm flow meters and water distributors available. Condition: like new – from cleanroom production. The following variants are available: Blsdpfx Ajw D Eh Ismyok * 3-way * 5-way * 6-way * 12-way * 13-way * 16-way Note: Original new prices can be found in the attached documentation. I would like to pay 1/3 of the new price.

Condition: good (used), The scope of delivery includes: Bodpfji A I Taex Amyslk 1x used continuous flow shelving frame Material color: white/galvanized Material color (rollers): white For traverse width: approx. 2,800 mm Overall width: approx. 2,780 mm Overall depth: approx. 2,450 mm Overall height: approx. 110 mm Further data for the continuous flow shelving frame: Number of roller strips per segment: 18 pieces Roller strip spacing: approx. 130 mm Shelf width: approx. 440 mm The KDR shelves were installed in the following shelving systems: Manufacturer: Tegometall Type: CI Clear width: 2,800 mm

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 57920 € 1094.69 € 60 to 2050 mm 3 (Y1, Y2, X) 265 mm 1700 mm 450 mm 530 mm hydraulisch 200 mm/s 10 mm/s 110 mm/s 650 mm 500 mm/s 350 mm/s 250 mm 900 mm 104 mm 100 l 7.5 kW 3200 mm 1550 mm 2850 mm 5600 kg 650 mm 3 axes (Y1, Y2,X ) CNC control DT-15 - 2D grafic display 15" - intuitive touch-screen control (simple drawing of the bending outline with your finger) - user friendly programming in dialogue form - automatic calculation of the bending sequence - automatic calculation of the blank sheet size - graphic product and tool memory - correction possibility - USB interfaces for backup and programm transportation - PC software, generating programms on the PC and transfer to the machine by USB servo motorized back gauge on linear guides and ball screws back gauge finger blocks on double linear guides CNC crowning table upper tool 1010 / A / 75 °, devidedand cranked 4-V die block 60x60 2009 (V = 16,22,35 and 50 mm) laser safety device Fiessler AKASmounted on the upper beam linear guided sheet support arms according to CE rules oilfilling users manual in English or German ADVANTAGES OF AD-S COMPAIRED TO PBF: - more stroke, installation height and throat Blsdpfx Aewirivemyok - higher approach and retraction speed of the top beam - higher backgauge speed - backgauge finger on double instead of single linear guide - more options available such as: additional backgauge axes (e.g. Z1/Z2, Delta X, up to 6 axes), bending aids, laser angle measuring system, tandem design, other CNC controls ... optional equipment: R-Axis R/Z1/Z2-Axis DBend, 3D CAD/CAM importing- and simulation program (step, iges and dxf file import) CNC Control SKY22 CNC Control Delem DA66 S CNC Control DELEM DA-69S 3D incl. PC software Profile-S with 3D file import option Quick Release Clamping

Condition: good (used), Year of construction: 2005, - 5 spindles - Min. working width 10 mm - Maximum working thickness 120 mm - Variable speed drive 5-29 m/min - Rotation of the machining spindle 6,000 rpm - Diameter of the machining spindle 40 mm - Tool diameter max 180 mm - Pneumatic clamp - tilting the heads at an angle heads order: 1. Rights 2. Rights 3. Left 4. Left Blodpfx Asiu E Rtjmysk 5. Left Installed power 18 kW 39A