Used Feutron Temperature Test Chamber for sale (17,962)

Condition: used, CTS   CTS CW‑60/5.5 – Water-Cooled Climate Test Chamber   The CW‑60/5.5 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climate chamber for conducting temperature and humidity tests on multiple test specimens simultaneously.   Device Description The climate test chamber can be used to test the function or material properties of a test specimen under temperature and humidity conditions. The good air circulation, with a correspondingly high volume of recirculated air, guarantees good transfer to the test specimen. The air handling unit is located at the rear of the interior. The units are located behind the device in a separate frame and are easily accessible. The control system is housed in a separate control cabinet. The control panel is integrated into the control cabinet door. To dehumidify the test chamber, the chamber is equipped with a self-regenerating compressed air dryer. The test chamber can be purged with fresh air via a fan.   Technical Performance Data:   Temperature Tests: Temperature range -60 °C to +100 °C Temperature deviation ±0.5 to 1 K over time Temperature change rate, linear with test specimen and with heat radiation, measured in the supply air Heating: 2 K/min from -40 °C to +85 °C Cooling: 2 K/min from +85 °C to -40 °C   Climate Tests: Kodpfozizmbox Ahbjdu   Temperature range +10 °C to +90 °C Humidity range 10 % to 95 % relative humidity in the dew point range +5°C to +89 °C Temperature deviation ± 0.5 K over time Humidity deviation ±1 - ±3 % r.h. over time   The technical data refer to an ambient temperature of +25 °C, rated voltage 400 V, without test specimen, without radiation, and without additional equipment.   Dimensions: Internal dimensions (test chamber / usable space): Volume: approx. 5,500 liters (5.5 m³)   Internal dimensions (approx.): Height: 2300 mm Width: 1600 mm Depth: 1550 mm External dimensions: Height: 2800 mm Width: 2250 mm Depth: 5000 mm   Operating Data:   Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz Rated power: 58.3 kW (incl. 5 sockets) Rated current: 86.0 A Protection class IP 54   Technical Design:   Refrigeration unit water-cooled, low-noise, semi-hermetic, stepless power adjustment through electronic monitoring and control system, environmentally friendly refrigerant R 23 / R 404 A   Notes   Inspection possible by arrangement (46325 Borken)   Shipping by freight forwarder possible – costs & organization on request   Scope of supply: (See picture)   (Changes and errors in the technical data are subject to change!)   We will gladly answer any further questions you may have by phone.

Condition: used, Vötsch Type: VCS 7034-5 Water-cooled climate test chamber Test chamber volume: 335 liters Performance for temperature tests Temperature range: -70 to +180°C Time-based temperature deviation: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±2.0 K Temperature gradient: 1 to 4 Kodpfx Aozizl Dehbjdu Rate of change: Cooling: 3.5 K/min Heating: 6.8 K/min Heat compensation at +20°C: 3000 W / at -20°C: 3000 W Temperature calibration values: +23°C and +80°C Performance for climate tests Temperature range: +10 to +95°C Time-based temperature deviation: ±0.1 to ±0.3 K Spatial temperature deviation: ±0.5 to ±1.0 K Temperature gradient: 1 to 2 K Humidity range: 10 to 98% Time-based humidity deviation: ±1 to ±3% Dew point range: -3 to +94°C Heat compensation: 400 W Climate calibration values: +23°C / 50% RH and +95°C / 50% RH Test chamber dimensions: Width 580mm, Depth 765mm, Height 750mm External dimensions: Width 870mm, Depth 1595mm, Height 1775mm 1 Feedthrough, approx. 50 mm diameter, left 2 Feedthrough, approx. 125 mm diameter, left 1 Feedthrough, approx. 125 mm diameter, right Electrical connection: 3/N/PE AC, 400 V ±10% 50 Hz Rated power: 10 kW Rated current: 21 A Sound pressure level: 64dB(A) Cooling water consumption: 1.4 m³/h Refrigerant: R404A / R-23 For your safety as a buyer, please note the following information! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We are happy to answer any further questions you may have by phone.

Condition: used, Weiss   Type: WT1-340/30   Converted to R452a   Weiss temperature chamber, air-cooled   Temperature range: from -30°C to 180°C   Temperature change rate, cooling: 1.6 K/min Temperature change rate, heating: 2.1 K/min   Test chamber dimensions: Width 550 mm x Depth 750 mm x Height 800 mm Housing dimensions: Width 800 mm x Depth 1500 mm x Height 1800 mm   Voltage: 3/N/PE AC 400V ±10% 50Hz Rated power: 4.9 kW, Rated current: 9 A   Refrigerant: R452a Kjdpfx Ajzd Rw Sjhbedu   Weight: 515 kg   For your safety as a buyer, please note the following information:   The following steps are performed on our offered chambers in advance: 1. Functional check and replacement of any necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run.   Condition: used   Scope of delivery: (See picture)   (Changes and errors in the technical data are subject to change!)   We will gladly answer any further questions you may have over the phone.

Condition: used, Thermotron Type: Thermotron SE-1000-5-5 Water-cooled Thermotron temperature chamber SE-1000-5-5 Kedszd R S Nspfx Ahbodu Dimensions of the working area - WxDxH: 102 x 100 x 97 centimeters Working area volume: 986 liters Temperature uniformity: ± 0.5°C Temperature range: -70°C to 180°C Temperature control tolerance: 0.3°C Overall dimensions - WxDxH: 122 x 188 x 218 centimeters Electrical requirements 400/3/50 32.4 A Refrigerant: R-404A / R23 Approximate weight: 862 kg For your safety as a buyer, please note the following information: The following steps are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant 3. Leakage test with certificate 4. After successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and information are subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: used, Thermotron Type: SM-8-8200 Thermotron environmental test chamber, water-cooled Working area volume: 227 liters Temperature uniformity: All models 0.7°C Temperature range: -70°C to +180°C Temperature control tolerance: All models 0.3°C Shipping weight: approx. 400 kg Internal dimensions: Width 610 mm x Depth 610 mm x Height 610 mm External dimensions: Width 890 mm x Depth 1240 mm x Height 1850 mm Humidity range: All models 10% to 98% RH Humidity control: All models 2.5% RH Heating time in minutes -65°C to 71°C: 17 Heating time in minutes -65°C to 180°C: 43 Heating time in minutes -40°C to 85°C: 16 Electrical requirements in full-load amps 230/3/60: 19 Kdedpjzd Snrefx Ahbeu Electrical requirements in full-load amps 230/1/60: 25 Electrical requirements in full-load amps 220/1/50: 27 Cooling time in minutes 85°C to -40°C: 32 Cooling time in minutes 71°C to -65°C: 54 Cooling time in minutes 180°C to -65°C: 72 Compressor size: (2) -2 Hp Operating voltage: 400V 16.7 A Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: used, Köhler Type: HKT 500 WTG Köhler salt spray chamber, corrosion chamber Köhler salt spray chamber HKT 500 Operation via touchscreen Internal dimensions W x D x H (without hood): 1880 x 840 x 1210 mm Ksdezd Ux Tspfx Ahbsdu Test chamber volume: 500 l Temperature range: chamber, room temperature to 50°C Power supply: 230V 1P/N/50Hz 3000W Weight: 400 kg Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: used, Espec Type: EHS-221M Espec (ThermoTec) Stress Test Chamber Overpressure and humidity tests at over 100 degrees Celsius in many different modes. Program capacity of 10 samples with 30 steps per sample. Ksdpfxjzd Uy De Ahbodu A variety of safety mechanisms: over-temperature/overpressure protection, detection of water supply failure, complete door interlock, and temperature sensor. Saturated temperature range: 105 to 142.9°C Unsaturated temperature range: 105 to 132.9°C Humidity range: 50 to 100% r.h. Nominal pressure: 0.196 MPa at 132.9°C and 100% r.h. External dimensions: Width 740 x Height 1553 x Depth 1000 mm Test chamber dimensions: Width 355 x Height 355 x Depth 426 mm Other equipment: with rails and grating Test specimen connections inside Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: used, H. KÖHLER GmbH Condensation Water Test Device / Corrosion Test Cabinet H. KÖHLER HK 300 S Condensation Water Climate Test Device according to DIN 50 017 For sale is a used condensation water test device from the manufacturer H. Köhler GmbH. The device is suitable for corrosion tests, condensation water climate tests, material testing, coating testing, paint testing, and quality assurance. Technical Data Manufacturer: H. Köhler GmbH Type: HK 300 S Device Type: Condensation Water Test Device / Corrosion Test Cabinet Test Standard: DIN 50 017 Test Chamber Volume: approx. 300 liters Temperature Range: Room temperature to approx. +55 °C Humidity Range: Saturation operation possible Test Chamber Heater: 1,000 W Power Connection: 230 V / 50 Hz Connected Load: 1,000 W Compressed Air Consumption during Ventilation: approx. 3 Nm³/h Kdsdpfx Aozhadcehbju Compressed Air Connection: 4.5 - 7.0 bar Deionized Water Connection: 2.5 - 4.0 bar Dimensions without Brine Tank: Width: approx. 1,200 mm Depth: approx. 600 mm Height: approx. 1,750 mm Weight: approx. 100 kg Control System HK PC102 Control LCD Display Programmable Test Cycles Condensation Water Climate according to DIN 50 017 Manual Operation / Test Operation Heater 1 / Heater 2 Alarm Display Equipment Stainless Steel Test Chamber Large Glass Door with Seal Test Chamber Thermometer Manometer Ventilation System Compressed Air Connection Deionized Water Connection Drain Connection Stainless Steel Base with Castors Accessories as shown in the pictures Application Areas Condensation Water Testing Corrosion Testing Coating Testing Paint Testing Material Testing Automotive Industry Quality Assurance Research and Development Condition Used Optical Condition as shown in the pictures No documentation available Scope of Delivery H. Köhler HK 300 S Condensation Water Test Device Stainless Steel Base Accessories as shown in the pictures The other items visible in the pictures, which are not explicitly described, are not included in the scope of delivery. Shipping or freight shipping is possible. Subject to changes, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: used, Liebisch Constamatic Type: S1000 M-TR Corrosion testing system / Salt spray test chamber Liebisch Constamatic S1000M-TR (4BVL) Professional corrosion testing system for salt spray, condensation, and cyclic climate tests For sale is a used corrosion testing system from the manufacturer Liebisch Labortechnik. The system was developed for corrosion tests under defined environmental conditions and is suitable for quality control, research, development, and material and coating tests. Due to the robust chest design and large test chamber volume, larger components can also be tested. Technical data Manufacturer: Liebisch Labortechnik Type: Constamatic S1000M-TR (4BVL) Device type: Corrosion testing system / Salt spray test chamber Design: Chest design Test chamber volume: 1000 liters Test chamber dimensions (W x D x H): 1435 x 780 x 600 mm External dimensions (W x D x H): 2600 x 1120 x 1255 mm Temperature range, test chamber: Ambient temperature to 50 °C Temperature range, humidifier: Ambient temperature to 70 °C Reservoir for salt solution: 100 liters Power connection: 230 V AC Frequency: 50–60 Hz Current consumption: 12 A Power consumption: approx. 2700 W Suitable for tests according to DIN EN ISO 9227 DIN EN ISO 6270-2 VDA 621-415 ASTM B368 MIL STD 202 F-101D VW PV 1210 as well as other corrosion and cyclic climate tests Equipment Automatic control Salt spray test Condensation test Combined corrosion and cyclic climate tests Temperature control Humidification system Test rack with sample holders Pressure gauge Large reservoir for test solution Gas spring dampers for comfortable lid opening Areas of application Automotive industry Coating and paint testing Material testing Quality assurance Research and development Laboratory and testing technology Weight: 450 kg Condition Used Normal signs of wear and tear Interior with discoloration due to corrosion from previous testing operations Optical condition as shown in the pictures Scope of supply as shown in the pictures Scope of supply 1x Liebisch Constamatic S1000M-TR corrosion testing system Test rack and integrated holders Other accessories as shown in the pictures Kedpfx Aozcdyxjhbodu Inspection and testing on-site are possible by arrangement and are highly recommended. Loading can be organized by arrangement. (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Vötschtechnik Climate test chamber / Temperature test chamber Vötschtechnik ClimeEvent C/340/70/5 Temperature and climate test chamber, water-cooled For sale is a used climate test chamber from Vötschtechnik GmbH. The test chamber is suitable for temperature and climate tests, environmental simulation, material testing, quality assurance, as well as development and stress tests. Technical data Manufacturer: Vötschtechnik GmbH Type: ClimeEvent C/340/70/5 Device type: Climate test chamber / Temperature test chamber Year of construction: 2018 Test chamber volume: approx. 340 liters Weight: approx. 650 kg External dimensions (H x W x D): approx. 1830 x 900 x 1890 mm Internal dimensions (H x W x D): approx. 750 x 580 x 765 mm Temperature range: -70 °C to +180 °C Temperature change rate (heating): approx. 7 K/min Temperature change rate (cooling): approx. 6.7 K/min Max. heat compensation: approx. 3000 W Temperature deviation (time): ±0.1 to ±0.5 K Temperature homogeneity (spatial): ±0.5 to ±1 K Temperature gradient: ≤2 K Climate range (temperature): +10 °C to +95 °C Dew point range: -3 °C to +94 °C Humidity range: 10 to 98 % RH Humidity deviation (time): ±1 to ±3 % RH Temperature deviation (time, climate operation): ±0.1 to ±0.3 K Temperature homogeneity (spatial, climate operation): ±0.5 to ±1 K Refrigerant: R449A / R23 Refrigerant quantity: 2.50 kg / 0.75 kg Power connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 9 kW Rated current: 20 A Sound pressure level: approx. 57 dB(A) Equipment Touchscreen control Stainless steel interior Large viewing window Interior lighting Water-cooled version Side cable entry Multiple shelf levels Ethernet interface USB interface Accessories as shown in the pictures Application areas Temperature testing Climate testing Kdedpfx Aezznx Ishbsu Environmental simulation Material testing Electronics testing Quality assurance Research and development Condition Used Optical condition as shown in the pictures Scope of supply 1x Vötschtechnik ClimeEvent C/340/70/5 climate test chamber Accessories as shown in the pictures Important note: For the safety of our customers, the following work will be carried out on the offered climate chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leakage test with certificate 4. Documented test run after successful inspection Shipping or freight forwarding possible. Subject to changes, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: used, CTS Type: C-40/350 Air-cooled climate testing chamber For sale is a professional CTS climate testing chamber, model C-40/350. This unit is designed for demanding environmental simulations in industry and is ideal for material testing, electronics, automotive, aerospace, and research. Temperature tests: Temperature range -40°C to +180°C Temperature deviation ≤ ±0.3 K over time Temperature change rate according to IEC 60068-3-5 Heating 3.5 K/min Cooling 4 K/min Heat compensation approx. 3500 W at +20°C approx. 2000 W at -20°C Climate tests: Temperature range +10°C to +90°C Humidity range 10% to 95% relative humidity Dew point range +5°C to 78°C Temperature deviation ≤ 1.0 K over time Humidity deviation ≤ +3.0% RH over time The technical data refers to an ambient temperature of +25°C, rated voltage 400V, without test specimen, without heat compensation, and without additional equipment. Options may influence the performance data. Technical design: Refrigeration unit air-cooled, low-noise, fully hermetic, stepless power adjustment through electronic monitoring and control system, environmentally friendly refrigerant R404A Test chamber: Floor load 150 kg / m2 Insert grid: Stainless steel, Surface area 620 x 600 mm Load per grid max. 35 kg Total load with max. grid configuration 100 kg Control: 32-bit controller LCD operating panel Digital display of setpoint and actual values Numerical input of setpoints Error messages in plain text RS 232 interface Ethernet interface Free switching channels for on-site test specimen control Dimensions: Test volume 350 liters Internal dimensions: Height 750 mm × Width 650 mm × Depth 715 mm External dimensions: Height 1800 mm × Width 920 mm × Depth 1670 mm Operating data: Electrical connection 400V 3/N, 50 Hz Kdjdjzizmzopfx Ahbeu Rated power 7.1 kW Rated current 11.5 A Protection class IP 54 Sound pressure level

Condition: used, Köhler Type: HK 500 Salt spray chambers: Versatile testing options, from salt spray tests to fully automatic alternating tests Simple operation thanks to a graphical menu Customer-specific designs for many applications Easy operation via a touchscreen Internal dimensions W x D x H (without hood): 1080 x 675 x 580 mm External dimensions W x D x H: 1940 x 900 x 1220 mm Test chamber volume: 500 liters Chamber temperature: Ambient temperature +5 – 60°C Humidification temperature: Ambient temperature +5 – 75°C Power connection: 230V, 1 phase, 50/60Hz, 2000W Compressed air: 4.5 – 8.0 bar / 3 Nm³/h Salt solution reservoir: 140 liters Material: Stainless steel (Completely overhauled and converted by the manufacturer to a Comfort control system) - Renewal of all electrical components - Renewal of all hose connections 400 kg Condition: used Kedpfx Ahszd Umkjbjdu Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: used, Weiss Kdjdpfx Ahozd Ultsbsu Type: SB2/500/80 Water-cooled climate testing chamber Cold-heat operation: -75°C ... +180°C Climate operation: +10...+95°C Humidity range: 10...98 % RH Temperature stability, over time: ± 0.2K Humidity stability: ±1 % RH Temperature change rate: Cooling: approx. 1.4 K/min Heating: approx. 2.5 K/min External dimensions: Height 1980 mm, Width 1265 mm, Depth 1365 mm Connections: Left side: ∅ 100 mm Right side: ∅ 50 mm The connection voltage is: 400V/3Ph+N+PE/50 Hz Power: 10.4 kVA Weight: approx. 720 kg Refrigerant: R404a / R23 For your security as a buyer, please note the following information! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: used, RS Simulators Type: KS 300 / 75 Water-cooled climate test chamber 300 liters Internal dimensions: Width 670 mm, Depth 670 mm, Height 670 mm Temperature range from -75 °C to +180 °C Time deviation: +- 0.2 K to +- 0.8 K Average heating rate: approx. 2.1 K/min Average cooling rate: approx. 1.2 K/min Humidity range from 10 % to 98 % relative humidity Operating climate range Temperature: 10 °C to 95 °C Humidity: 25 % to 75 % relative humidity Kdodpfx Ahezd R Auobeu Dimensions: Width 1000 mm, Height 1800 mm, Depth 1400 mm Voltage: 3x400V/N/PE, Current: 40A Refrigerant: R404a / R23 Weight: 630 kg For your safety as a buyer, please note the following information: The following points are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant 3. After successful inspection, the chambers are subjected to a test run, which is monitored with calibrated devices. Condition: used Scope of delivery: (See pictures) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Atlas Type: SC 350 MHG Atlas Solar Climatic Test Chamber, Air-Cooled For sale is an ATLAS SC-340 MHG SolarClimatic test chamber (climatic chamber with solar simulation using an MHG lamp). The unit is suitable for carrying out standardized weathering and aging tests under the combined influence of radiation, temperature, and climate. Equipment & Special Features: Precise temperature and humidity control Integrated humidification system with water tank Cooling via water or air system (optional) Feedthroughs for measuring cables available Control via control panel or interfaces (RS232 etc.) Stable test chamber floor, load-bearing up to 60 kg (optional reinforced up to 150 kg) General Data: Model: SC 340 MHG Test chamber volume: approx. 335 liters Chamber weight: approx. 500 kg Irradiation unit weight: approx. 65 kg Technical Data: Test volume: 340 l (internal dimensions 580 × 765 × 750 mm) External dimensions (W×D×H): 865 × 1,595 × 2,180 mm Radiation source: 1 × 1,200 W MHG lamp Irradiance: 800–1,200 W/m² Irradiated area: approx. 1,600 cm² Weathering: Spectrum 300–3,000 nm, standardized tests according to DIN 75220, IEC 60068-2-5, MIL-STD-810F Temperature range with radiation: –20 °C to +100 °C (±1 K) Kdjdpfxjziizms Ahbou Temperature range without radiation: –30 °C to +100 °C (±0.1–0.5 K) Heating/cooling rates: 3.0 K/min (heating), 2.5 K/min (cooling, without radiation) Noise level: approx. 58 dB(A) at 1 m distance Power supply: 400 V, 3/N/PE, 50 Hz Power consumption: max. 6.2 kW, 16 A Refrigerant: R-404A Weight: approx. 565 kg For your security as a buyer, please note the following: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: used, Vötsch   Type: VCS³ 7027-10   Vötsch climate testing chamber, water-cooled With a temperature change rate of 10 K/min   Data for temperature testing: Temperature range: -72°C to +180°C Temporal temperature deviation in the center of the usable space: ± 0.3 K to ± 0.5 K Spatial temperature deviation: ± 0.5 K to ± 2.0 K   Temperature change rate Heating: 10 K/min Cooling: 14.5 K/min   Data for climate testing: Temperature range: +10°C to +95°C (extended climate range: 2°C/95% RH, regulated for a maximum of 2 hours) Temporal temperature deviation in the center of the usable space: ± 0.2 K to ± 0.3 K Spatial temperature deviation: ± 0.5 K to ± 1.0 K Temporal humidity deviation in the center of the usable space: ± 1% to ± 3% RH Humidity range: 10% to 98% RH (extended climate range: 2°C/95% RH, regulated for a maximum of 2 hours)   External dimensions: Width 780 x Depth 1895 x Height 1775 (mm) Test chamber dimensions: Width 580 x Depth 615 x Height 750 (mm) Test chamber volume: approx. 270 liters   Side opening: 50 mm Side opening: 125 mm   Data for operation: LED strip 24 V, 6.8 W / 2 x halogen bulb 24 V, 50 W Rated voltage: 3/N/PE AC 400 V ± 10%, 50 Hz Rated power: 14 kW Rated current: 26 A Fuse, on customer’s side: 63 A, slow-blow   Refrigerant: R404A/R-23   Weight approx. 835 kg   For your safety as a buyer, please note the following information!   Ksdpfx Aezh Huushbjdu The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run.   Condition: used   Scope of supply: (See picture)   (Changes and errors in the technical data are subject to change!)   We will gladly answer any further questions you may have by phone.

Condition: used, Weiss   Type: WT11-1000/40   Weiss temperature chamber, air-cooled, with Weiss condenser cooler   Test chamber volume approx. 990 liters   Data for temperature tests:   Temperature range -40°C to +180°C   Temporal temperature deviation in the center of the usable space ± 0.1 to ± 0.5 K Spatial temperature deviation ± 0.5 to ± 2.0 K Temperature gradient (according to IEC 60068-3-5) 1 to 4 K   Temperature change rate (according to IEC 60068-3-5) Heating 4 K/min Cooling 3 K/min   Heat compensation max. 4500 W   Feedthroughs installed as standard Kedpfxezfzamo Ahbedu R1: NW 125 mm L1: NW 50 m   Dimensions:   Test chamber dimensions: Width 1100 mm x Depth 950 mm x Height 950 mm Housing dimensions: Width 1390 mm x Depth 1525 mm x Height 1995 mm   Maximum load (evenly distributed over the area) of the test chamber floor 150 kg Per insert shelf 50 kg Total load of the shelf supports 100 kg   Data for operation:   Test chamber lighting: Halogen bulb 24V, 50W   Rated voltage 3/N / PE AC 400 V ± 10% 50 Hz Rated power 11.5 kW Rated current 22 A Heat dissipation water-cooled test cabinets max. heat dissipation to the environment 1.3 kW   Noise measurement: Sound pressure level approx. 64 dB(A)   Refrigerant: (converted to R-452a)   Weight: approx. 840 kg   For your safety as a buyer, please note the following information!   The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run.   Condition: used   Scope of supply: (See picture)   (Changes and errors in the technical data are subject to change!)   We will gladly answer any further questions you may have by telephone.

Condition: used, Liebisch Type: S 1000 A-TR / 42016211 Kdjdezh Ht Ropfx Ahbeu Chamber-type test equipment with a 1000-liter test chamber volume for salt spray tests. Constamatic® TR This series includes automatically controlled chamber-type test equipment of type A-TR. The device's internal control is operated via a touchscreen. All functions are displayed on a touchscreen with intuitive user guidance. Technical data: Device type: S 1000 A-TR External dimensions of the housing: (W x D x H in mm) 2600 x 1120 x 1210 Internal dimensions of the test chamber: (W x D x H in mm) 1535/1425 x 800/780 x 660/650 Max. load of the sample holder: 10 kg / level 10 kg Operating voltage: 230 V +6/-10% Connected load S: 2700 W Control range humidity S: up to / 70°C Control range test chamber K: up to / 50°C Control range test chamber S: up to / 50°C Frequency: 50/60 Hz Device fuse: 12 A Temperature control: PLC Over-temperature protection: yes Volume of test chamber: 1000 liters Reservoir for test solution: approx. / 150 liters Test solution consumption / hour: approx. / 0.7 – 1.0 liters Water filling, base pan KON: 15 liters Weight: 450 kg Condition: used Scope of delivery: (See image) (Subject to changes and errors in the technical data!) We would be happy to answer any further questions you may have over the phone.

Condition: used, Vötsch Type: VTS 7011-5 Heraeus Vötsch temperature control chamber, water-cooled Test chamber volume: 110 liters Test chamber dimensions: Width 560 mm, Depth 350 mm, Height 630 mm External dimensions: Width 850 mm, Depth 1030 mm, Height 1640 mm Temperature range: -70°C to +180°C Temporal temperature deviation: ± 0.3 to 1 K Kdodpfszg Tpcex Ahbju Spatial temperature deviation: ± 0.5 to ± 2 K Temperature change rate (cooling): 6 K/min Temperature change rate (heating): 10 K/min Refrigerant: R-404A / R 23 Voltage: 3/N/PE AC 400V ±10% 50Hz Rated power: 7.5 kW Rated current: 13 A Weight: 360 kg For your safety as a buyer, please note the following information: The following steps are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: used, RS Simulators Type: Walk-in climate simulation chamber KKC 22/45 Water-cooled Technical data: Temperature range: -40 to +120 °C Temperature tolerance: +/- 1.5 °C Temperature change rate: 1 K/min Humidity range: 10 to approx. 95% RH Humidity tolerance: +/- 5.0% RH Dimensions: Test chamber volume: 22 m³ External dimensions (W x D x H): approx. 2600 mm x 6400 mm x 2800 mm Test chamber (W x D x H): approx. 2200 mm x 4700 mm x 2300 mm Kjdpfx Ahozg Txdsbodu Door opening (W x H): approx. 2200 mm x 2300 mm Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: used, Weiss Technik Kdedpjzg Er Ajfx Ahbou Salt spray chamber / corrosion test cabinet Weiss Technik SaltEvent SC 1000 Corrosion test equipment / salt spray test chamber For sale is a used Weiss Technik SaltEvent SC 1000 salt spray chamber. The device is suitable for corrosion tests, salt spray tests, material testing, surface testing, quality assurance, as well as research and development. Technical data Manufacturer: Weiss Technik GmbH Type: SaltEvent SC 1000 Device type: Salt spray chamber / corrosion test equipment Year of manufacture: 2019 Test chamber size: Size 1000 liters Rated voltage: 1/N/PE AC 230 V ±10 % / 50 Hz Rated power: 2.6 kW Rated current: 11.3 A Customer-side fuse: 16 A slow-blow Weight: approx. 370 kg Overall dimensions according to layout drawing: approx. 2910 × 900 × 960 mm Max. test chamber load: 150 kg Floor grid load: 150 kg Insertion rods: 8 kg per rod Shelf for machine part covers: 5 kg Temperature range salt spray test: Ambient temperature +5 K to +50 °C Temperature range condensation test: Ambient temperature +5 K to +42 °C Temperature compressed air humidifier: Ambient temperature +5 K to +70 °C Temperature stability over time: ±1 K Salt solution consumption during salt spray test: approx. 0.5 to 1.5 l/h Equipment S!MPAC control system WEBSeason / color control panel Touch operating panel Test chamber hood Storage tank Control cabinet Floor grid / test chamber grid Compressed air humidifier Hood locking Temperature monitoring Interface Documentation as shown in the pictures Connections / media supply Power connection: 230 V / 50 Hz Compressed air connection available Connection for demineralized water available Exhaust connection available Water drain / condensate drain available Application areas Salt spray test Corrosion test Condensation test Material testing Surface testing Coating testing Automotive Quality assurance Research and development Condition Used Optical condition as shown in the pictures. Scope of supply 1x Weiss Technik SaltEvent SC 1000 salt spray chamber Storage tank Accessories as shown in the pictures Documentation as shown in the pictures The table shown in the photos and any other items not explicitly mentioned are not included in the sale. Inspection possible by appointment. Loading with a forklift is available. Shipping or freight forwarding is possible. Subject to change, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: used, ESPEC Temperature Shock Chamber ESPEC TSA-72EL-A Temperature Shock Chamber Water-cooled For sale is a used ESPEC temperature shock chamber, model TSA-72EL-A from the manufacturer ESPEC CORP. This chamber is suitable for temperature shock tests, temperature cycling tests, material testing, electronics testing, automotive applications, quality assurance, and research and development. Technical Data Ksdpfxjzhkfqo Ahbsdu Manufacturer: ESPEC CORP. Model: TSA-72EL-A Type of equipment: Temperature Shock Chamber System: 2-zone testing with damper switching Design: Air-cooled Test chamber volume: approx. 72 liters Internal dimensions of test chamber (W × H × D): 410 × 460 × 370 mm External dimensions (W × H × D): 1310 × 1900 × 1470 mm Weight: approx. 900 kg Temperature range, hot chamber: +50 °C to +200 °C Temperature range, cold chamber: -65 °C to 0 °C Temperature stability: ±0.5 °C Preheating temperature: up to +205 °C Pre-cooling temperature: up to -75 °C Heating time: from ambient temperature to +200 °C within approx. 15 minutes Cooling time: from ambient temperature to -70 °C within approx. 40 minutes Temperature recovery condition: +125 °C / 30 min. to -40 °C / 30 min. Temperature recovery time: within approx. 5 minutes Max. test chamber load: 30 kg evenly distributed Cable entry: Ø approx. 50 mm Compressed air supply: 0.4 to 0.7 MPa / 4 to 7 bar Refrigerant, high-temperature side: R404A Refrigerant, low-temperature side: R23 Power supply: AC 400 V / 3 phases / 50 Hz Max. current consumption: 45 A Features Color touchscreen control TFT color LCD, 10.4 inches PID temperature control Program memory Trend graphics Alarm history Eco mode Automatic defrost RS-485 interface Over-temperature / under-temperature protection Vertical sliding door Stainless steel test chamber Mechanical cascade refrigeration system Electronic expansion valve Sirocco circulating air fan Damper drive via air cylinder 2 stainless steel test inserts Cable entry, Ø approx. 50 mm Application areas Temperature shock testing Temperature cycling testing Electronics testing Semiconductor testing Automotive Component testing Material testing Quality assurance Research and development Condition Used Optical condition as shown in the images Scope of delivery 1x ESPEC TSA-72EL-A Temperature Shock Chamber 2x Stainless steel test inserts Accessories as shown in the images Important note: For the safety of our customers, the following work will be carried out on the offered climate chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. Documented test run after successful inspection Inspection possible by appointment. Forklift available for loading. Shipping or freight forwarding possible. Subject to changes, errors and prior sale. We would be happy to answer any further questions by telephone.

Condition: used, CTS Type: CSR-60/810/S Temperature & Climate Air Conditioning Unit, Air-Cooled CTS Climate Testing System CSR-60/810/S | -60 °C to +170 °C 39.6 kW | Test chamber 1200 L Description: For sale is a professional climate and temperature testing system from CTS GmbH, consisting of a CSR-60/810/S type conditioning unit and an external test chamber (1200 liters). The system is ideally suited for industrial, development, and laboratory applications, e.g., for automotive, electronics, component, and material testing. It enables precise temperature and climate simulations over an extremely wide operating range. This is a professional climate and temperature conditioning system from CTS GmbH, consisting of: Conditioning unit (CSR-60/810/S) External test chamber (Test chamber 1200 L) The system is designed to supply external test rooms or test chambers with precisely controlled temperature and humidity. Typical applications include industrial, automotive, electronics, material, and component testing (environmental simulation, stress screening, lifetime testing). Technical data (from nameplate & manual) General: Manufacturer: CTS GmbH, Hechingen Type: CSR-60/810/S Year of construction: Temperature & Climate Temperature range: -60 °C to +170 °C Humidity range: 10 % to 80 % RH Dew point range: +5 °C to +74 °C Electrical data: Rated voltage: 400 V / 3-phase / N / PE / 50 Hz Rated power: 39.6 kW Rated current: 64.9 A Recommended fuse: 80 A slow-blow Connection type: Fixed connection Refrigeration system Refrigerant: Pre-cooling stage: R452A (17.0 kg) Cooling stage: R23 (5.3 kg) Compressor: Bitzer (cascade system) Protection class: Conditioning unit: IP54 Test chamber: IP22 Dimensions & Weight: Conditioning unit: Dimensions (W x D x H): approx. 1,200 × 1,100 × 2,200 mm Weight: approx. 1,200–1,500 kg Test chamber 1200 L Dimensions (W x D x H): approx. 1,600 × 1,400 × 1,600 mm Weight: approx. 600–800 kg Total system weight: approx. 1.8–2.3 t For your safety as a buyer, the following information: Kdjdpfxjzimgae Ahbou The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Weiss Type: WK11 - 600/70/5 Weiss Climate Chamber, Water-Cooled The Weiss climate chamber WK11-600/70/5, with an approximate usable volume of 600 liters, is suitable for temperature and humidity testing as well as for conditioning samples and materials in the range of -70 °C to +180 °C. Simcon/32 - Net Controller Technical Data: Test chamber designation: WK11-600/70/5 External dimensions with hinges and door closure: Height 1995 mm, Width 1090 mm, Depth 1660 mm External dimensions without hinges and door closure: Kedpfozimg Hox Ahbodu Height 1995 mm, Width 1000 mm, Depth 800 mm Internal dimensions: Height 950 mm, Width 800 mm, Depth 800 mm Connections: 2x R1 NW 125 mm ∅ 1x L1 NW 50 mm ∅ Test chamber volume: approx. 600 liters Data for temperature tests: Temperature range -70 °C to 180 °C Temporal temperature deviations in the center of the usable space: ± 0.1 to ± 0.5 K Spatial temperature deviations: ± 0.5 to ± 2 K Temperature gradient: 1 to 4 K Temperature change rate: Heating: 6 K/min Cooling: 6 K/min Thermal compensation: at +20 °C: 5000 W at -20 °C: 5000 W Data for climate tests: Temperature range +10 to +95 °C Humidity range 10 to 98 % RH Temporal temperature deviations in the center of the usable space: ± 0.1 to ± 0.3 K Spatial temperature deviations: ± 0.5 to ± 1 K Temperature gradient: 1 to 2 K Temporal humidity fluctuation in the center of the usable space: ± 1 to ± 3 % RH Thermal compensation: 500 W 3/N/PE AC 400V ±10% 50Hz Rated power: 16.5 kW Rated current: 29 A Fuse on customer side: 32 A slow-blow Permissible weight of test specimen: Total load of the shelf supports: 80 kg Test chamber floor: 80 kg, insert shelf: 40 kg Weight: 675 kg Refrigerant: R452A / R23 Important note: "The table shown in the photos is not included in the sale." For your safety as a buyer, please note the following information! The following points will be carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers will be subjected to a documented test run. Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Vötsch   Type: VCS 7033   Vötsch climate chamber VCS 7033, water-cooled   Temperature range: -70°C to +180°C   Temperature change rate:   Heating: 7.5 K/min Cooling: 6.5 K/min   Humidity range: 10% to 98% RH   Temperature deviation (temporal): ± 0.5 K Temperature deviation (spatial): ± 1.5 K   Test chamber dimensions: Width 675 mm x Depth 650 mm x Height 760 mm Housing dimensions: Width 930 mm x Depth 1565 mm x Height 1840 mm   Side feedthrough: 90 mm diameter   Approx. 330 L, weight: 600 kg   Voltage: 3/N/PE AC 400V ±6/-10% 50Hz Rated power: 9.5 kW, rated current: 17 A   Refrigerant: R-404A / R23   Kodpfxszfy Rqe Ahbsdu For your safety as a buyer, please note the following:   The following steps are carried out on our offered chambers in advance: 1. Functional check and replacement of any necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leakage test with certificate 4. After successful inspection, the chambers are subjected to a documented test run.   Condition: used   Scope of supply: (See picture)   (Changes and errors in the technical data are subject to change!)   We would be happy to answer any further questions you may have over the phone.