Used Eubama Eubama S6 for sale (1,191)

Condition: good (used), functionality: fully functional, Year of construction: 2019, battery capacity: 775 Ah, remaining battery capacity: 88 %, battery voltage: 48 V, total length: 1,025 mm, total width: 530 mm, total height: 785 mm, overall weight: 1,118 kg, fuel type: electric, Forklift battery 48V 5PzS625, battery tested at 88% capacity Year of manufacture: 2019 Dimensions (l x w x h): 1025mm x 530mm x 630mm Weight: 889 kg Battery has been serviced and tested by a specialist company. Capacity test (C5 discharge test): 556/625 Ah battery Remaining capacity: 88% Equipped with an Aquamatic filling system (BFS) Knedpfx Acozl A H Iocsc With terminal bolts, but WITHOUT end connection.

Condition: used, Year of construction: 1997, pressure 0630 t stroke 300 mm no. of strokes 10- 75 Hub/min table-size 3600 x 2200 mm passage width 4000 mm ram surface 3600 x 2200 mm column travel -side 2000 mm ram adjustment 150 mm shut height (stroke down, adjustm. up) 1000 mm voltage 400 V height over floor 7600 mm Depth of Press under floor 2500 mm total power requirement 160 kW weight of the machine ca. 225 t dimensions of the machine ca. 750 m² Knsdpfx Aowx R Rdeccoc Complete feeding line comes with the machine. It works on a material width of 300- 1600 mm and a thickness of 0,5- 3 mm. Machine has two working tables which move in and out to the front. To the side machine has a stacking device with two pallets. It also has two stacking pallets to the backside. Machine has a Coil charging device of 3 Coils with 25 t, a decoiler Schnutz, a material feeder, a straightening machine and a roll feeder.

Condition: reconditioned (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: X66924, clamping force: 6,600 kN, screw diameter: 115 mm, clearance between the columns: 1,000 mm, displacement volume: 5,349 cm³, injection pressure: 1,800 bar, injection weight: 5,082 g, opening stroke: 1,200 mm, Used Stork IMM 6600EP-8650 injection molding machine. The machine has been overhauled, tested and repaired. Knsdowhk Iuspfx Accec

Condition: new, Year of construction: 2023, New machine Year of manufacture: 2023 Technical data: Working width: 630 mm 4-knife planing cutterhead system TERSA, d=120mm: 4,800 rpm Max. chip removal during jointing according to CE: 8 mm Min./max. thickness setting: 3/310 mm Min. workpiece length: 250 mm Feed speed: continuously variable, 6 - 20 m/min. Motor 380 Volt / 50 Hz: 7.5 kW Sound pressure level according to EN 27960: 86 - 90 dB(A) Standard equipment: Kjdpfx Acew I U Hmeconc Thickness table adjustment via 4 trapezoidal threaded spindles Electromotoric thickness table lift with electronic positioning device (input of the planing height via keyboard with electronic display) Electrical system according to CE with magnetic brake Protective switch Emergency stop switch Safety switch for cutterhead cover Thickness table extension 600 mm Dust extraction port d=150mm Availability: short-term Location: Flörsheim

Condition: used, mileage: 750,864 km, power: 478 kW (649.90 HP), first registration: 01/2018, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, color: grey, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, Scania S 650 A4x2NB CS20 H FIN: 9230668 Chassis / Components: * Wheelbase: 3,750 mm * Full / Air suspension (2 bellows) rear axle * Tires: Front: 385/65 R22.5, Rear: 315/80 R22.5 * Remaining tread depth: Front: approx. 50%, Rear: approx. 90% * 1 x Aluminum tank, 750 L * 1 x AD-Blue tank * 1 x Hydraulic tank Hyva, 201 L Cab: * CS 20 H * Leather seats / Leather steering wheel * 1 x Bunk * Refrigerator * Automatic climate control * Auxiliary heater * Stand-alone air conditioning * Scania Infotainment Premium * Aux, USB, BT * Roof bar Light Fix LED * Skylights / LED * DAB * Scania-AEB = Emergency braking assistant * Scania ACC = Adaptive cruise control * LDW = Lane departure warning * AICC = Speed-dependent adaptive cruise control Engine / Transmission: * 16,353 cc // 650 hp / 478 kW // EURO 6c * Scania retarder * Opticruise / Automatic with 2 pedals * Differential lock * PTO (Power Take-Off) Weights: * Gross vehicle weight: 18,000 kg * Unladen weight: 8,582 kg * Payload: 9,418 kg Other: * German vehicle Ksdpfozaxxksx Accenc * SP 02 / 2027 ---- New main inspections / safety checks or weight adjustments (reduction/increase) are possible upon request. We will gladly assist you in obtaining export/transfer license plates, and we can also arrange for the transport of your purchased vehicles within Germany. Contact us! ---- We speak the following languages: German, English, and Russian! ---- No liability for printing & typographical errors, changes, prior sale, and errors reserved! ---- Who are we? Leible Nutzfahrzeuge is a family-owned company based in Kehl am Rhein. With our many years of experience in the preparation and sale of commercial vehicles, we are a reliable partner for customers worldwide. The particular strength of Leible Nutzfahrzeuge lies in the sale of new and used commercial vehicles. On 11,000 m², you will find a wide variety of vehicles. Our corporate philosophy is characterized by fairness and integrity. As customer satisfaction is very important to us, we offer our customers an excellent all-round service package and provide them with a competent contact person who will assist them in the purchase or sale of vehicles. Convince yourself! Our service for you: Loading vehicles We will gladly assist you in loading your purchased vehicles. Organizing special transports We will gladly assist you in organizing special transports. Daytime registration / Export license plates We will gladly assist you in obtaining export license plates / short-term registration. Handling customs formalities We will gladly assist you in handling customs matters.

Condition: ready for operation (used), Konica Minolta Bizhub 6120p with 5.9 million copies, fully equipped and in good condition, tested and ready to print. Ksdozh Hn Ijpfx Accenc Equipment: - PF 710 - RU 510 - FS 532 As an experienced retailer of used copiers, we have developed considerable expertise in packing and pallet/container shipping to guarantee that our customers receive machines in perfect condition. Our company offers the widest range of production copiers and handles worldwide deliveries upon request. Please do not hesitate to contact us for further information.

Condition: new, Bernardo Semi-Automatic Double Mitering Bandsaw MBS 600 DGA-V / 400 V Technical Specifications Kedpezibdtefx Accenc Cutting capacity, round / square 90° 410 mm / 300 x 300 mm Cutting capacity, flat 90° 540 x 300 mm Cutting capacity, round / square 45° R 400 mm / 260 x 260 mm Cutting capacity, flat 45° R 400 x 210 mm Cutting capacity, round / square 45° L 340 mm / 260 x 260 mm Cutting capacity, flat 45° L 380 x 170 mm Cutting capacity, round / square 60° R 260 mm / 175 x 175 mm Working height 965 mm Bandsaw blade dimensions 4290 x 34 x 1.1 mm Cutting speed, stepless 20 – 80 m/min Coolant pump 100 W Motor output S1 100% 2.2 kW Motor input S6 40% 3.0 kW Voltage 400 V Machine dimensions (L x W x H) 2340 x 1430 x 1550 mm Weight approx. 686 kg Mode of operation, semi-automatic: • Hydraulic clamping of the vise • Hydraulic lowering of the saw arm • Raising of the saw arm Scope of delivery • Saw blade • Workpiece stop • Base frame • Manometer for belt tension • Saw blade guide with carbide inserts • Quick-release vise • Coolant system • Hydraulic lowering cylinder • Motor circuit breaker • Automatic end stop

Condition: excellent (used), functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, DGUV certified until: 08/2027, type of input current: three-phase, warranty duration: 6 months, TOP – Winterhalter GS 650 Energy+ Dishwasher - Freestanding unit, stainless steel design - 3 wash programs - Powerful pump Knjdpfx Acsxduw Aocec - 1 wash basket - Booster pump - Rinse pump & detergent pump - Large tank - Equipped with Energy+ heat exchanger - Connection: 400 V, 32A-CEE plug - Dimensions: 755 x 880 x 1780 / 2350 mm (W x D x H) - Used machine - Comes with warranty + spare parts service Quality from a specialist company! Benefit from over 35 years of experience! Options: - Water filter - Delivery service - Maintenance contract - Service package - Spare parts box for added security - Training and commissioning Visit our large showroom!

Condition: new, Siemens 1FT6062-1AH71-3AG1 servomotor, SN: 1TS629247601, unused in original packaging, 100% functional, scope of delivery as per photos. Ksdsx Dunbepfx Accenc

Condition: excellent (used), Year of construction: 1996, grinding length 600 mm grinding width 350 mm total power requirement 7,5 kW Q U O T A T I O N We are pleased to offer you ex our stock, subject to prior sale, and error in technical data : GEIBEL & HOTZ CNC horizontal surface & profile grinding machine model FS 635 - Z CNC year 1996 Knsdpfxex Harys Accsc Grinding length max. (table movement 660 mm) 600 mm Grinding width max. (cross movement 360 mm) 350 mm Mounting height under new grinding wheel 375 mm Distance table – center of spindle min / max 140 – 525 mm Standard size of magnetic plate 600 x 350 mm Table size 820 x 350 mm Max. table load 400 kg Table speed 5 – 35.000 mm/min Cross movement, intermittently 3 – 40 mm Cross-/Vertical quick feed 5 m/min Grinding wheel measurements 300 x 50 x 76,2 mm Grinding spindle speeds, variable 1.000 – 3.000 rpm Grinding spindle-drive approx. 7,5 kW Total electrical load approx. 15 kW - 400 V - 50 Hz Weight approx. 2.600 kg Accessories / Special Features: • SIEMENS CNC control model 840 D with comprehensivel GEIBEL&HOTZ grinding software. User friendly interface, supported by dialog and graphics, simple programming also of complex grinding wheel profiling and easy linking of grinding cycles. • All standard grinding-programms and cycles as surface and multiple surfaces grinding with roughing-finishing-sparkout- return, plunge in grinding, automatic dressing cycle with compensation, etc. • electronic handwheel for 3 axis; cross feed (Z) and infeed (Y) effected by ball screw drive. • Table movement is actuated by belt drive (Z), which allows both very high and very low table speeds and is also ideal for profile grinding. • Hydraulically upwarding diamond dressing device mounted on the left side of the table (also for profile dressing); additional fixed dresser with automatic dressing cycle, including compensation. • Mounted sinus tilting magnetic plate 600 x 200 mm, fine pole division. • Separate paper band coolant filtration unit, separate switch cabinet, lamp for working area, various accessories, manuals, etc. Condition : very good, universal machine for all sorts of grinding tasks ! Please click here to view a video of the machine running : ! Delivery : immediately available, FCA Metzingen Payment : 100 % Net, after conclusion of contract, before loading We always have a large selection of surface grinders – CNC or conventional - available. Please let us know your requirements.

Condition: used, mileage: 33,825 km, power: 90 kW (122.37 HP), first registration: 03/2000, overall weight: 7,490 kg, fuel type: diesel, color: beige, gearing type: mechanical, loading space width: 2,440 mm, loading space length: 4,180 mm, loading space height: 1,800 mm, total width: 2,500 mm, total height: 3,200 mm, Equipment: ABS, parking heater, Very good condition, directly from disaster control service, regularly maintained, no rust, immediately ready for operation. Large long-distance driver's cab 2 with roof hatch / 2+4 seats with seatbelts, optionally with sleeping berth. Rear axle differential lock. Engine type/design/cycle: OM 904 LA, 4-stroke diesel engine with turbocharging and intercooler, direct injection, 90 (122) kW (hp) at 2300 rpm, 4249 cm³. Transmission: 6-speed manual gearbox. Braking system: Dual-circuit air brake system with ABS, spring-loaded parking brake acting on rear wheels, engine brake. Wheels: 6x 225 / 75 R 17.5 M+S, 1. 6.5 bar 2. 4.75 bar Electrical system: 24V, onboard voltage 12V Maximum speed: 109 km/h (documents), 115-120 km/h (speedometer), no tachograph Turning circle: 13.7 m Weights and capacities (kg): * Gross vehicle weight: 7490 * Unladen weight: 4555 * Payload: 2935 * Axle load, unladen / max: 1. 2500 / 3300 2. 1900 / 4900 * Trailer load unbraked: 1500 * Trailer load with overrun brake: 3500, with continuous brake system: 7500 Dimensions (mm or O): L: 6505, W: 2500, H: 3200 Wheelbase: 3700 Approach angle: front: 23°, rear: 17° Loading platform height: 1127 Knjdpfox Hq Tbjx Accoc Coupling height: 670 Drawbar coupling, type: Rockinger, Ringfeder G 135 Trailer socket/type/voltage: 12 V, 13-pin, with adapter 7-pin 24 V, 15-pin Brake connections: two-line braking system Vertical load: 400 kg Warm air heating Type/model: Eberspächer D1LC, Heat output: 850 – 1800 W, adjustable Tank: 125L + mounting bracket for 2x20L canisters Price incl. new TÜV/general inspection +++ Subject to errors, changes, and prior sale.

Condition: used, Year of construction: 1998, Hydraulic chainsaw Blade maximum diameter 500mm Small stroke cutting capacity: 250/120mm Double stroke cutting capacity: 600/120mm Command by double buttons Motor 7.5kw Small run: 36 cups/min Double feed: 18 cuts/min 400V 350 cm stop with rollers with digital display 1 m roller conveyor at discharge Machine documents Knodpoyngb Aefx Accjc Machine footprint: Chainsaw: 110cm/140cm/h175cm (with pallet) Conveyor discharge: 370cm/110cm/h90cm Input conveyor: 70cm/65cm/h90cm Dimensions of the assembly: 530cm/140cm

Condition: used, mileage: 209,841 km, power: 200 kW (271.92 HP), first registration: 02/2015, color: white, gearing type: automatic, emission class: euro6, number of seats: 2, Year of construction: 2015, Equipment: ABS, central locking, electric window regulation, power mirror, = Additional options and accessories = - Remote controlled central locking - Reversing camera = Further information = General information Number of doors: 2 Technical information Number of cylinders: 6 Engine displacement: 7,800 cc Fuel type: Natural gas Weights Unladen weight: 16,025 kg Payload: 11,975 kg Gross vehicle weight: 28,000 kg Interior Interior: Black Kedpfsy Rmlbjx Accjnc Maintenance, history and condition Number of owners: 2 Number of keys: 2 Product safety Manufacturer: IVECO Schouten Used B.V. / Altena Trucks B.V. Almweg 4 4286LG ALMKERK, NL

Condition: ready for operation (used), Siemens 7ME4110-2CC10-1AA0 SITRANS F C MASS 6000 SN 190919N406, as new, 100% functional, delivery as per photos. Knedjy Nr R Hspfx Accoc

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Machine refurbished by Nodema for packaging products in bundles. The machine has a heat-shrink tunnel attached to the frame for packaging. It can process up to 17 products per minute. The sealing bar is 600mm wide. The film width is up to 800mm. Ksdpfjy Tuxzox Accjnc This machine has an angled infeed, making it ideal for packaging products such as canned beverages with a tray.

Condition: new, power: 350 kW (475.87 HP), fuel type: diesel, overall weight: 40,000 kg, tire size: 325/95R24, axle configuration: 6x4, wheelbase: 3,600 mm, brakes: engine braking, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro5, suspension: steel, number of seats: 2, Equipment: ABS, air conditioning, cabin, central locking, cruise control, differential lock, fog lights, onboard computer, power assisted steering, seat heater, traction control, Vehicle location: Bovenden, StreamSpace, Mercedes PowerShift 3, long cab, 1x comfort seat, 1x sleeper berth, seat heating, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, sun visor, cruise control, electric roof, ABS (anti-lock braking system), traction control (ASR), constant throttle, PTO, differential lock, fog lights, leaf suspension, aluminum fuel tank, green environmental sticker. Wheelbase: 3600 mm, 8t front axle, rear axle planetary gear 16t, crown wheel 300, electronic braking system with ABS and ASR, ABS switchable, drum brakes on front and rear axle, stabilizer on front axle, condensate monitoring for compressed air system, electronic parking brake, smoker package, seatbelt monitoring, lower comfort bed, construction site dust filter, electric lifting roof, prep for upper comfort bed, reversing warning system, StreamSpace, light sensor, economy/power driving programs, Mercedes PowerShift 3, PowerShift Advanced, multimedia radio with touch display, classic dashboard, tank capacity: 320l + 480l, transmission oil cooling, LED daytime running lights, high performance engine brake, protection plate under bumper, cyclone pre-filter for coarse dust, Grounder, PTO MB 131-2c pump. Export only! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors excepted! Knodpfjyrt Sisx Accec

Condition: excellent (used), mileage: 25 km, power: 382 kW (519.37 HP), first registration: 04/2026, fuel type: diesel, axle configuration: 6x6, wheelbase: 4,150 mm, fuel: diesel, fuel tank capacity: 390 l, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: other, emission class: euro3, Year of construction: 2026, Equipment: air conditioning, electric window regulation, retarder, trailer coupling, = Additional options and accessories = - All-wheel drive - Leaf spring suspension - Intarder - Cab - Sun visor - Power take-off (PTO) - Tow hitch = Further information = Transmission: continuously variable transmission Front axle: Steerable Number of cylinders: 6 GVWR: 180,000 kg Ksdpsyyyn Ijfx Acconc Body brand: TURBO RETARDER CLUTCH Technical condition: very good Optical condition: very good

Condition: good (used), Year of construction: 1992, Sheet metal shears, tin scissors, sheet metal scissors, hydraulic shears -Sheet shear: hydraulic -Cutting width: 2000 mm -Max. cutting thickness: steel 6 mm -Features: Back gauge, cutting gap adjustment -Space requirement: 3280/2700/H2060 mm Kodpeywzbdsfx Accenc -Transport dimensions: 2280/2700/H2060 mm -Weight: 5980 kg

Condition: used, mileage: 652,600 km, power: 350 kW (475.87 HP), first registration: 11/2018, fuel type: diesel, empty load weight: 13,632 kg, maximum load weight: 12,368 kg, overall weight: 26,000 kg, axle configuration: 6x2, wheelbase: 3,600 mm, fuel: diesel, brakes: engine braking, color: blue, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Equipment: ABS, air conditioning, crane, cruise control, differential lock, low noise, onboard computer, parking heater, soot filter, Mercedes-Benz Actros 2548 LS 6x2 semi-trailer tractor unit with heavy-duty crane First registration: 11/2018 652,600 km with documentation Euro 6 emission class Long-distance cab Mercedes PowerShift automatic transmission Air conditioning, auxiliary heater Adaptive cruise control Lane keeping assist 6x2 drive Leaf/air suspension Knedpfxozcg Eqs Accec Liftable 3rd axle Adjustable fifth wheel Tires 385/55 R22.5, tread depth approx. 60% Tires 315/70 R22.5, tread depth approx. 60% Wheelbase 3600mm Unladen weight 13,925 kg Crane HMF 3220 K4 Year of manufacture: 2018 Including rotator Remote control 4-point outriggers 4 hydraulic extensions 4.60 m / 6410 kg 6.40 m / 4460 kg 8.30 m / 3330 kg 10.30 m / 2620 kg 12.30 m / 2170 kg Hook height approx. 16 meters The vehicle is from a single owner and is in good condition. Export/net price: 67,900 Euros All information without guarantee, errors and omissions excepted.

Year of construction: 2015, condition: used, Manufacturer : SWECO / MACON Separator Knjdpfxjzfwvqo Accoc Model : MA48S6666 Year : 2015 Motor power: 1.8 kW / 2.5 HP Available separation level: 1 Screen diameter: Ø 1200 mmUnclogging system: noneMaximum number of stages: 3 (2 screens) Height: 630 mm (Frame only) / 995 mm (with screen)

Condition: used, Year of construction: 2002, Suitable for automatic grinding of all types of tools. Accessories: Total enclosure Knoll E53319 bandfilter system Numroto 3D Simulation Software, Numroto 3D Collision Detection Software, Numroto Form Cutter Software, Pallet loader CNC handwheel Kjdeyv Hv Rspfx Acconc Control cabinet cooler, automatic tailstock automatic central lubrication Glass scales on the X, Y, Z linear axes Measuring probe Hydraulic workpiece clamping Oil collection tray 2 loading pallets, 1 grinding wheel holder. X axis travel: 800 mm Y axis travel: 270 mm Z-axis travel: 660 mm B axis travel: 400 ° Rapid traverse: 30/15/30 m/min Workpiece mount: ISO 50 Tool holder cone: ISO 50 Grinding spindle drive power: 12 kW Grinding spindle speed stepless: max. 9000 rpm, Grinding wheel diameter: max 203mm Connected load approx.: (400V/50Hz) Dimensions L x W x H: 1900 x 2300 x 2300 mm Weight approx: 5400 kg Colour: Grey / yellow

Condition: excellent (used), Year of construction: 1996, Wood chip screening system Kjdpfx Acoxn T R Asconc Manufacturer - Andritz Group, Model: Konewood CS600 Screen capacity: 400-675m3/h Sieving sawdust and shavings from wood chips Conveyors. Steel Structures: – Steel support structures for screens and conveyors – Ladders and walkways for operation and maintenance

Condition: repair required (used), Year of construction: 2009, operating hours: 4,131 h, functionality: limited functionality, number of ink cartridges: 8, color channels: 8, number of print heads: 1, We are selling our Epson printer, which is no longer needed. It has been stored in our warehouse for a few years and was used to print photos in the garage. The print head is likely defective, and it does not recognize the cartridges on the left side, indicating that they are empty, even though they are full. Includes software and automatic paper roll feed. Knsdezi Svmepfx Accsc I did not connect it to the network, so I can only provide the number of pages printed: 4131 pages. Sold as is, with defects. We didn't use it much because we mostly print on our plotter. Inspection is possible.

Year of construction: 2000, condition: ready for operation (used), A Stromab pendulum saw with swiveling saw unit and roller conveyors is available. Motor power: 7.5kW, saw blade diameter: 600mm, saw blade bore: 20mm, max. cutting height: 210mm, max. cutting length: 460mm, extraction port diameter: 150mm, roller conveyor length left/right: 2500mm/2500mm, roller conveyor width: 500mm, weight: approx. 600kg. Documentation available. An on-site inspection is possible. Kjdsyb Sclspfx Acconc

Condition: ready for operation (used), Year of construction: 2010, Workpiece diameter: 500mm, workpiece height: 730mm, travel X/Y/Z: 630mm/765mm/600mm, A-axis: -120°/+30°, C-axis: +/-360°, max. table load: 500kg, spindle interface: HSK-A63, speed: 18000rpm, rapid traverse: 52m/min, feed rate: 52m/min, rotary table diameter: 610mm, tool positions: 30, control: Mazak Mazatrol Matrix. Documentation available. An on-site inspection is possible. The machine is located in China. Knjdpox Aunxofx Accjc