Used Estarta 312 for sale (351)

Condition: good (used), Year of construction: 1995, Engine: JGC312 with 551 kW (year 1995) - Turbocharger overhauled 4,000 hours ago - Additional oil cooler – 3 years old - Cylinder head – new in 2017 - Charge air cooler overhauled 4,000 hours ago - Exhaust manifold – new in 2021 - Complete engine overhaul in 2017 Ljdpfxevcm Nfo Albjah Offer is made without guarantee of availability.

Year of construction: 2001, condition: used, Technical details: Numbers of turbines: 1 Stck. drum length: 580 mm operating hours: 30.810 h compressed air: 5 - 7 bar filling volume: 100 dm³ total power requirement: 24,2 kW total wight: ca. 5,8 t DRUM - Shotblasting Plant in a closed drum Manual and automatic operation technical specifications: -spinning wheel Ø = 380mm -drum Ø = 1150 mm x length 580 mm -max. filling weight = 220 kg, filling volume 100dm³ -piece size (max. edge length) = 100mm -Turbines 380mm; 15.0 kW -blast media discharge speed approx. 80.0 m/s -Ablast media throughput/turbine approx. 240.0 kg/min. -Steel abrasive grade, nothing else possible! (recommended is: StD-Z 0,6 DIN 8201 HV 700) -Compressed air with cartridge filter system approx. 12 m³/h The plant is not electrically connected. Sale as currently is at the warehouse Leipzig (see last photos). Laodpju Nu Nkefx Albeh Machine has been functional before dismantling. *

Condition: good (used), Year of construction: 2019, The Durst Rho 312R is an industrial-grade, 3.2-meter roll-to-roll UV inkjet printer optimized for high-volume production of backlits, fine art prints, POP displays, and outdoor advertising. Manufacturing Year: 2019 Double side print option Colour configuration: 4 colors Mileage: 220.000m² only! In production Printhead status: some slots must be replaced Demo possible Location: Western Europe For further technical information please refer to attached brochure. Productivity & Speed • Maximum Output: Up to 240 m²/h to 274 m²/h in standard high-speed modes. • Boost Mode (Plus Variant): Up to 305 m²/h. Ledpfx Alez Hw Iaebjah • Production Mode: Roughly 128 m²/h to 130 m²/h. • Multi-Roll Printing: Supports simultaneous printing on two 1.6-meter rolls with independent queues

Condition: refurbished (used), battery capacity: 620 Ah, battery voltage: 48 V, total height: 784 mm, total length: 835 mm, total width: 526 mm, Tested forklift battery for your forklift – 48V 4PZS 620Ah – DIN A + 1-year warranty + including Aquamatik (automatic watering system) + including terminal discharge cable & REMA 320 connector (other connectors can be fitted upon request) + Capacity: minimum 90-100% (C5 capacity protocol included with delivery) + Year of manufacture/delivery: 2024 Dimensions: Length 835 mm Width 526 mm Height 784 mm Weight: approx. 960 kg Suitable for the following models and others: Linde E 15 C - 322-00 Linde E 16 CH - 1275-00 Linde E 18 Z - 322-00 Linde E 20 PH - 386-02 – side battery change Linde V MODULAR - 5213-00 Jungheinrich EKS 308 Laedpfoy Rni Ujx Albjh Jungheinrich EKS 312 Crown SC 3220 Common battery sizes available, please inquire. Transport can be arranged.

Condition: used, mileage: 91,498 km, power: 206 kW (280.08 HP), first registration: 12/2006, fuel type: diesel, overall weight: 15,000 kg, axle configuration: 2 axles, brakes: retarder, color: red, gearing type: automatic, emission class: euro4, total length: 10,000 mm, total width: 2,500 mm, total height: 3,240 mm, Year of construction: 2006, Equipment: ABS, air conditioning, compressor, MAN LE 15.280 with METZ DLK 23-12 L32 CAN aerial ladder, in ready-to-use condition. ----Equipment of the base vehicle: * Air conditioning * Suspension type: leaf spring/leaf spring * Wheelbase 4575 mm * Permissible total weight 15 t * Automatic transmission ZF 5 HP 590 with retarder * Fuel tank 125l, right side * Adjustable steering wheel * Axle ratio i = 4.62 * Differential lock in rear axle * Medium-length cab * Driver's comfort seat with lumbar support - Manufacturer: GRAMMER * Co-driver's seat Manufacturer: GRAMMER * Exhaust pipe for fire department * Quick-start system * Anti-lock braking system (ABS) * Traction control system * Disc brake for front axle * Armrests on both doors * Additional high and low beam headlights * Hour meter * Cruise control * Radio MAN CD 24V * Stabilizers front and rear axle * Headrests for driver and co-driver * Cab rear wall with 2 narrow windows, left and right * Heated and electrically adjustable rearview mirror * Wide-angle mirror, left and right, heated * Curb mirror, right, heated and electrically adjustable * Electric windows, left and right * 4-wheel parking brake * Tire chains on the rear axle * Winter tires Conti Scandinavia Equipment of the aerial ladder superstructure: * Superstructure: Metz aerial ladder DLK 23-12 L32 CAN with rescue platform (rescue height approx. 30.75m) Max. swiveling angle: 75 degrees, Max. platform load capacity: 270kg, Nominal rescue height: 23m, Nominal outreach: 12m, Outrigger support: horizontal-vertical, Outrigger width variable between 2,400mm and 4,500mm * 2014.9 operating hours * LED spotlights on the ladder for area lighting * Special warning light system * Front warning lights * Original Martin horn system (4-funnel). * Stretcher storage for accommodating a DIN stretcher, including conversion for accommodating a rescue litter, load capacity up to 150 kg * Fixed 230V power supply to the rescue platform, 2 Schuko sockets in the rescue platform * Fixed water supply in the upper part of the ladder with valve and B-Storz couplings * 3 securing points in the rescue platform for securing the crew * Load ring on the lower ladder, loadable up to 4000kg * Load ring on the boom segment (between ladder tip and rescue platform) for attaching a rappelling device, 270kg/400kg payload * LED ambient lighting on the undercarriage * XXL platform on the turntable for accommodating a DIN generator, ventilation unit, traffic cones, spare canister, rescue litter, and extension pipe * LED floodlight bar on the lower ladder, approx. 8282 lumens * 2 x adjustable LED spotlights at the end of the lower ladder, 2880 lumens each, operable from the main control panel * LED spotlights left and right on the rescue platform, 1800 lumens each * 2 LED floodlight bars on swivel arms, left and right on the rescue platform, 3105 lumens each (as a replacement for 1000 watt halogen spotlights) * Complete service booklet available, all maintenance performed annually ----Immediately ready-to-use vehicle in well-maintained condition, inside and out! Non-smoking vehicle! Your contact person for this vehicle: Lsdpfx Alsxafw Seboah ---- Daniel Seidler Tel: Mobile: also WhatsApp Email: Subject to changes, prior sale and errors!

Condition: used, mileage: 19,393 km, power: 191 kW (259.69 HP), first registration: 09/1997, fuel type: diesel, overall weight: 14,000 kg, axle configuration: 2 axles, color: red, gearing type: mechanical, emission class: euro2, total width: 2,400 mm, total height: 3,260 mm, Year of construction: 1997, Equipment: ABS, compressor, MAN 15.264 Silent with METZ DLK 23-12 PLC III turntable ladder in immediately operational condition! ----First registration: 26.09.1997 Mileage: 19,393 km Operating hours: 1,170 h Chassis equipment: * Leaf/leaf spring suspension * Wheelbase 4325 mm * Permissible total weight 15 t * 8-speed manual transmission EATON * Fuel tank 127L rear * Adjustable steering wheel * Axle ratio i = 4.11 * Differential lock on rear axle * Medium-length driver's cab * Driver comfort seat with lumbar support - Make: GRAMMER * Front passenger bench, Make: GRAMMER * Exhaust tailpipe for fire department use * Engine brake * Anti-lock braking system (ABS) * Traction control (ASR) * Disc brakes for front axle (new brake discs and pads!) * Armrests on both doors * Heated driver's seat * Additional headlights and fog lights * Operating hour counter * Headrest for driver * 2 headrests for front passenger * Rear cab wall with 2 narrow windows, left and right * Heated and electrically adjustable rearview mirrors * Right side wide-angle mirror, heated * Right side kerb mirror, heated * Reversing camera Turntable ladder superstructure equipment: * Superstructure: Metz turntable ladder DLK 23-12 PLC III with rescue cage (rescue height approx. 30.75m). Max. elevation angle: 75 degrees, max. cage load: 270kg, rated rescue height: 23m, rated outreach: 12m, stabilizers: horizontal-vertical, stabilizer width adjustable between 2400mm and 4500mm * Complete service booklet available, all maintenance carried out annually * Front blue warning beacons and rear blue lights ----Immediately operational vehicle in well-maintained condition! Non-smoking vehicle - in good condition inside and out! Your contact person for this vehicle: ---- Daniel Seidler Tel: Mobile: also WhatsApp Email: Ledpfswlxbdsx Albeah Subject to changes, prior sale, and errors!

Condition: used, Year of construction: 2006, Used Machine Year of Manufacture: 2006 Condition: Completely Overhauled Features and Technical Specifications: - Equipped with a new glue application system - Manually adjustable feed guide - Joining milling unit 1961 - Edge feeder 1903 - Glue application station 1906 with sensing nozzle - Pneumatic pressure unit 1816 - Trimming unit 1822 - Milling unit 1942 M: radius, chamfer, flush - Blowing nozzle, complete - Scraper unit 1929 - Chip collection box - Surface scraper 1964 - Exhaust hood set - Protective hoods, complete - Total length: 5291 mm - Workpiece thickness: min. 6 / max. 50 mm - Edge banding thickness depending on configuration: 0.4–5 mm Lodozk Nlhspfx Albeah - Max. edge banding height: 55 mm - Edge banding strip length: min. 350 mm - Edge banding overhang/height per side: max. 3 mm - Workpiece width: min. 60 mm - Workpiece length: min. 180 mm - Feed speed: 12.5 m/min - Exhaust: - Jointing unit: 900 m³/h - Milling unit: 280 m³/h - Rake blade unit: 280 m³/h - Static negative pressure: - Joint milling unit: 1490 Pa - Milling unit: 1650 Pa - Min. air velocity: 20 m/sec - Joint milling unit connection: 70 mm - Scraper unit connection: 70 mm - Compressed air: 6 bar

Condition: used, mileage: 85,528 km, power: 206 kW (280.08 HP), first registration: 12/2004, fuel type: diesel, overall weight: 15,000 kg, axle configuration: 2 axles, brakes: retarder, color: red, gearing type: automatic, emission class: euro3, total width: 2,500 mm, total height: 3,290 mm, Year of construction: 2004, Equipment: ABS, compressor, MAN LE 15.280 with METZ DLK 23-12 PLC 3.2 L32 aerial ladder, in immediately operational condition. ----Equipment of the base vehicle: * Suspension type: leaf spring/leaf spring * Wheelbase: 4575 mm * Permissible gross weight: 15 tons * Automatic transmission ZF 5 HP 590 with retarder * Fuel tank: 125 liters, right side * Adjustable steering wheel * Axle ratio i = 4.62 * Differential lock in rear axle * Cab: medium length * Driver's comfort seat with lumbar support - manufacturer: GRAMMER * Passenger seat - manufacturer: GRAMMER * Exhaust pipe for fire department * Quick start system * Anti-lock braking system (ABS) * Traction control system * Disc brake for front axle * Armrests on both doors * Additional long-range and fog lights * Hour meter * Cruise control * Radio MAN CD 24V * Stabilizers for front and rear axle * Headrests for driver and passenger * Cab rear wall with 2 narrow windows, left and right * Heated and electrically adjustable rearview mirrors * Wide-angle mirrors, left and right, heated * Curb mirror, right, heated and electrically adjustable * Electric windows, left and right * 4-wheel parking brake * Snow chains on the rear axle * Winter tires Equipment of the aerial ladder superstructure: * Superstructure: Metz aerial ladder DLK 23-12 L32 CAN with rescue platform (rescue height approx. 30.75m) Max. outrigger angle: 75 degrees, max. platform load capacity: 270kg, nominal rescue height: 23m, nominal outreach: 12m, outriggers: horizontal-vertical, variable outrigger width between 2,400mm and 4,500mm * Special signal system * Front flashing light * Siren * Stretcher storage for accommodating a DIN stretcher, including conversion for accommodating a rescue sled, load capacity up to 150 kg * Permanently installed 230V power supply to the rescue platform, 2 Schuko sockets in the rescue platform * Permanently installed water supply line in the upper part of the ladder with slide valve and B-Storz couplings * 3 anchor points in the rescue platform for securing the platform crew * Load eye on the lower ladder, loadable with up to 4,000 kg * Load eye on the boom segment (between ladder tip and rescue platform) for attaching a lowering device, 270kg/400kg payload Laodpfx Aloxa Sbqjbjh * LED ambient lighting on the undercarriage * XXL platform on the turntable for accommodating a DIN generator, ventilation unit, traffic cones, etc. * 2 adjustable spotlights at the end of the lower ladder, operable from the main control panel * Complete service history available, all maintenance performed annually. Upon request and for an additional charge, a new 20-year service including hose replacement and inspection is possible! ----Immediately operational vehicle in well-maintained condition, both inside and out! Non-smoking vehicle! Your contact person for this vehicle: ---- Daniel Seidler Tel: Mobile: also Whatsapp Email: Subject to changes, prior sale and errors!

Condition: good (used), functionality: fully functional, machine/vehicle number: Serial No.: 110847, Year of construction: 2015, load capacity: 1,350 kg, lifting height: 6,000 mm, fork length: 1,150 mm, tire condition: 50 %, Equipment: pallet forks, Lajdpfx Aljy Hi I Dsbjh

Year of construction: 2010, condition: ready for operation (used), A complete turning line for the production of drive shafts, consisting of a Lang-Laru cut-off and centering machine, three EMAG lathes with robot automation, conveyor peripheral equipment and measuring station, is available. 1) End machining machine Lang-Laru DHZ 03/1250-RR-S, year of manufacture: 2010, tool stations: 2x12, loading: Kuka robot/EWAB conveyor, machine dimensions X/Y/Z: approx. 8600mm/3000mm/4100mm, weight: approx. 15000kg, control: Siemens Sinumerik 840D. 2) 3x vertical shaft turning centers EMAG VTC 250, year of manufacture: 2010, loading: Kuka robot/EWAB conveyor, max. turning length: 630mm, max. swing diameter over bed: 140mm, max. workpiece weight: 20kg, spindle bore: 52mm, speed: 5000rpm, tool stations: 2, tool holder: VDI40, machine dimensions X/Y/Z: approx. 8100mm/3300mm/4300mm, weight: approx. 14000kg, control: Siemens. This is a complete turning line with peripheral equipment and automation. Documentation available. An on-site inspection is possible. Ledpfx Aszfp Hhelbsah

Year of construction: 2017, condition: used, Used Machine Year of Manufacture: 2017 Features and Technical Specifications: Automatic cutting plotter with vacuum sectors on the work surface Automatic cutting table with automatic detection of print images and reference points The work surface consists of 40 individual vacuum sectors that are automatically activated as needed Multi-tool cutting head for cutting, scoring, and milling materials up to 50 mm thick Multi-batch cutting capable, allowing different substrates to be cut simultaneously Automatic tool presetting Video projection system for optimizing material yield Cutting speed up to 102 m/min, acceleration 1.4 G Automatic substrate height detection Working area 3100 x 2000 mm Suction sectors in the working area: 40 Cutting speed up to 102 m/min Tooling program: Scoring tool, oscillating blade, router Laedpszlbqlsfx Albjh Elitron CAD

Condition: new, Year of construction: 2025, functionality: fully functional, SEMI-AUTOMATIC ROBOT, FOR PALLET WRAPPING WITH STRETCH FILM Lajdpfjxx Ry Nex Alboh Upward-downward carriage speed Top and bottom reinforcement wraps Film tension Table rotation speed Ergonomic carriage stop at the end of the cycle Upward-downward cycle Self learning cycle Altimeter and photocell delay 6 recordable programs

Condition: used, operating hours: 7,972 h, lifting height: 4,500 mm, fuel type: diesel, motor manufacturer: Volvo-Diesel, Year of manufacture: 2019 Lifting capacity: 33.000 kg Please contact Sales Team for more information Lodpfoznw Husx Albeah AdBlue, Stage 4, full cabin, airco & heater, street & working lights, beacon, sideshift & forkpositoner, rear view camera

Year of construction: 2018, operating hours: 2,154 h, condition: ready for operation (used), overall weight: 11,000 kg, total width: 1,850 mm, total height: 2,890 mm, pressing force: 204 t, product length (max.): 3,580 mm, stroke length: 260 mm, Hydraulic press manufactured in 2018. This Baykal APHS 31200 features a press force of 200 t and a bending length of 3,100 mm. With a maximum stroke of approximately 260 mm, it is designed for efficient bending operations. If you are looking to get high-quality bending capabilities, consider the Baykal APHS 31200 hydraulic press we have for sale. Contact us for further details. • Hydraulic pressure: approx. 276 bar • Nominal power: approx. 15.3 kW • Power supply: 400 V / 50 Hz / 3 Ph • Production hours: 2,154 h Additional equipment • Included tooling: • V16 H80 mm: 10 / 15 / 20 / 40 / 50 / 100 / 200 / 370 / 835 ×2 mm • V50 H60 mm: 10 / 15 / 20 / 40 / 50 / 100 / 200 / 370 / 835 ×3 mm • V12 H80 mm: 10 ×2 / 15 / 20 / 195 / 285 / 295 / 835 ×3 mm • V80 H80 mm: 835 ×3 mm • V16 / V22 / V32 / V50: 10 / 15 / 20 / 40 / 50 / 100 / 200 / 370 / 835 ×3 mm • Additional tooling information: • ID 1177 – Standard – 85° – Height 65.50 mm – Radius 3.00 mm • ID 1271 – Standard – 60° – Height 115.00 mm – Radius 0.80 mm • ID 1284 – Standard – 60° – Height 135.00 mm – Radius 0.80 mm • TS-10.516 – Standard – 60° – Height 85.00 mm – Radius 0.80 mm Technical Specification Laedpfx Asz Hl Iujlbsh Bending Length 3100 mm

Condition: good (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 122, (Please tell us your offer price) Sale only within Europe, incl. Turkey Price without packaging; delivery condition: FCA (machine location) ===== Technical data see handout. Laodpfx Ajxruvuslbsh All warranty rights are excluded. For the correctness of the technical data and year of construction, for the completeness of accessories and tool equipment, and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations. No sale to private individuals. Sales only within Europe, incl. Turkey Price without packaging; Delivery condition: FCA (machine location) ===== Technical data please see handout in attachment. German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations. No private sales.

Condition: good (used), Folding machine, folding machine, form folding machine, profiling machine, profiling system, slat production, blind production, roller feeder, reel, unwind reel, motorized reel for sheet metal processing, motor reel, unwind reel, sheet metal unwinder, strip feeder, strip feeder for eccentric press, hydraulic press -Profiling system: Roller insertion with cooling water/hot water device, from slat/blind manufacturing -Sealing heads: maier type DX 215 L / DX 215 R -Rollers: Ø 120 x 220 mm -Drive: 1.1 kW -Individual components: see photos Lsdpepwnf Nofx Albsah -Drive shaft: Ø 35mm -Dimensions: 1120/405/1310 mm -Weight: 312 kg

Condition: used, Companion lens Height without base: 300 mm Diameter: 110 mm Lasdecrcybspfx Albjh Base width: 50 mm

Condition: ready for operation (used), Year of construction: 2007, pressing force: 122 t, Press brake manufactured in 2007. This Gade PS-C 3120 features a pressing force of 120 tons and a bending length of 3,000 mm. If you are looking to get high-quality bending capabilities, consider the Gade PS-C 3120 machine we have for sale. Contact us for further details. Technical Specification Lodpfx Alezzmydebeah Bending Length 3000 mm

Condition: excellent (used), power: 168 kW (228.42 HP), operation weight: 20,000 kg, chain condition: 90 %, Year of construction: 2022, operating hours: 2,110 h, Equipment: air conditioning, CATERPILLAR 963-12A year: 2022 operation hours: 2.110 hrs. ROPS Airco Radio Back drive camera Central lubrication bucket with teeth U/C: approx. 90% good trackshoes: 550 millimeter width CE / EPA Ripper valve CAT C7.1 engine with 168.9kW Lasdpfsyidn Tex Albsh operation weight: 20 tons

Condition: used, Year of construction: 2008, pressure 120 t chamfer lenght . mm distance between columns 2550 mm stroke 200 mm total power requirement 13,2 kVA Number of working hours 2500 h workpiece 1 Satz Standart workpiece 1 Satz Standart Prisma Number of strokes 11000 Ledpjyqvfcsfx Albjah weight of the machine ca. 8,3 t The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: ready for operation (used), Indramat DDS02.2-W050-B, serial number: 275962-31239, has been completely overhauled and tested by qualified personnel and comes with a 12-month warranty. It is 100% functional. The scope of delivery is as shown in the photos. Laedpfx Alsz R Iknjboh

Condition: excellent (used), 753 USED Koenig grain spreader. The device is operational, after inspection. EXTERNAL DIMENSIONS (in cm): - width 70, - length 312, - height 144. Lsdpfsr Eluwsx Albeah The device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: transport / assembly / commissioning of the device. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN.

Condition: ready for operation (used), Heidenhain ERN 1387.001-2048 / Z1 . 312 215-02 Serial number: 8852731C, used, in good condition, 100% functional, scope of delivery as per photos. Ljdpfoy Rclqjx Albsah

Condition: used, mileage: 128,877 km, power: 88 kW (119.65 HP), first registration: 04/2022, fuel type: diesel, overall weight: 3,340 kg, color: white, gearing type: mechanical, Maximum permissible total weight: 3340 kg. Ljdpfezq Hyvex Albsah

Condition: used, Year of construction: 1991, Technical details: x-travel: 1050 mm y-travel: 600 mm z-travel: 650 mm range of revolution per miute: 40 - 1720 / 12 step U/min spindle taper: SK 50 spindle head swivable left - right: 90° re/li und 45° = 360° ° distance spindle nose and table: 0 - 600 mm table surface area: 1700 x 470 mm Ledpeva Hd Refx Alboah feed continuous: X/Y= 15 - 625 + Z= 7,5 - 312 mm rapid traverse Z-axis: 1250 mm/min. rapid traverse:: X/Y: 2500 mm/min. total power requirement: 11,1 kW weight of the machine ca.: 2500 kg machine dimensions LxWxH: ca. 2,45 x 2,0 x 2,85 m Equipment: with Huron universal milling head coolant system control panel machine feet Accessories Machine vice (jaw width 120mm) *