Used Engel Engel Victory 200/50 Tech (2011) Viper 12 Robot for sale (64,525)

Condition: excellent (used), Year of construction: 2007, Type: Bwjdor Iy Nkepfx Albot Industrial robot Brand: Hyundai / Hanwha TechM Year of production: 2007 Maximum load: 200kg

Condition: excellent (used), Year of construction: 2021, operating hours: 14,600 h, functionality: fully functional, machine/vehicle number: 248760, clamping force: 40,000 kN, screw diameter: 70 mm, displacement volume: 1,212 cm³, injection pressure: 1,650 bar, injection weight: 1,030 g, mold height (min.): 450 mm, ejector force: 964,000 N, ejector stroke: 250 mm, opening stroke: 1,000 mm, plate length: 1,450 mm, plate width: 1,200 mm, plate height: 1,100 mm, installation height: 3,650 mm, total length: 7,740 mm, total width: 2,340 mm, total height: 2,300 mm, overall weight: 25,600 kg, heating capacity: 29 kW (39.43 HP), pressure: 200 bar, number of injections: 1, pump power: 56,000 W, power: 118 kW (160.44 HP), type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, input current: 213 A, Equipment: documentation/manual, The machine has few operating hours and is in very good condition, having been well-maintained. The machine comes with a Viper12 robot, which was originally supplied with it and can be seen in the accompanying photos. The robot’s control system is not integrated with the machine, so the robot can be removed and used separately, or another robot can be installed in its place. The machine has three air valves and two hydraulic valves, Euro map signals, and a signal for the dispensing unit’s rotation speed. The machine also has a strip guard, which is not included but can be arranged separately. The extruder’s heating elements are insulated with thermal insulation. Due to the guard, the machine can operate with the rear door open. It also has a water tank with 8 zones and two additional blocks with 8 outlets each. The machine has 8 zones for heating the tooling. Only PS material has been injection molded on this machine. Bwjdpfxszqbk No Albet

Condition: good (used), Year of construction: 2007, Ref. no.: 18597 Manufacturer: ENGEL Type: insert 200 H/70 CC 200 Year of construction: 2007 Clamping unit Clamping force: 70 ton Opening stroke: 305 mm Injection unit Screw diameter: 25 mm Injection volume: 69 cm³ Shot weight: 62 g Injection pressure: 2381 bar Measurements and weight Dimensions: 4,0 x 1,8 x 2,5 m Bedpey Au I Usfx Albjwt Machine weight: 5600 kg Further information: The ENGEL INSERT 200H/70 is a professional vertical injection moulding machine specially designed for insert molding and precision technical plastic applications. Built with ENGEL’s compact and robust machine concept, this model has been widely used for many years in the automotive, electronics, cable technology and technical plastics industries. One of the major advantages of this machine is its rotary table system. This design allows the operator to load inserts on one side while production continues on the other side. As a result, cycle times are reduced and production becomes safer and more efficient. This system is especially advantageous for manufacturing metal insert parts, connectors, cable components and precision technical products. Compared to conventional horizontal injection moulding machines, the ENGEL INSERT series offers a much more ergonomic and controlled process for insert placement. Thanks to the vertical clamping system, inserts remain stable inside the mould, enabling highly precise production results. The ENGEL control system used on this machine is known for stable process management and reliable operation. Its user-friendly interface allows easy handling in daily production. The machine has approximately 51,944 operating hours and was reportedly in running condition until removed from production. The overall condition of the machine is clean and well maintained. The electrical cabinet is tidy and the mechanical components appear to be in good condition. The ENGEL INSERT series is particularly suitable for: * insert molding applications * metal/plastic combination parts * electronic component production * connector and cable technology * technical plastic parts * precision industrial products With its robust mechanical construction, compact design and professional production capabilities, the ENGEL INSERT 200H/70 represents a reliable and long-lasting production solution for technical plastic manufacturers.

Condition: excellent (used), Year of construction: 2013, Engel Victory 330H/80V/160 combi Ecodrive / Production line with the Sepro SR S5-25 S3 Trans robot / Operating hours: approx. 18,000 h in automatic mode Year of construction: 2013 Injection unit: Screw diameter: 30 mm Injection weight: approx. 100 g Injection pressure: 2385 bar Dosing volume: 113 ccm Clamping unit: Clamping force: 160 t Distance between tie bars: 0x0 mm Size of the clamping plates: 750x750 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 200 - touch screen Additional equipment: 2K injection molding machine with rotary table and robot Tie-bar-less machine, hybrid: energy-saving, high-speed and very quiet Very good technical condition Operating hours: approx. 18,000 h in automatic mode Total number of operating hours: 24,312 h Euromap 67 Robot interface Air valve x 5 Hydraulic core pull x 5 Control unit with hot runners x 16 Reinforced injection units - bimetal Main motors - 2 x servo motor controlled with inverter Proportional valves on injection units - precise spraying Screw diameter in the vertical injection unit: ⌀22 mm - approx. 28 g/hp It is possible to purchase a turntable Robot Sepro SR S5-25 S3 Trans Year of construction: 2013 3-axis robot: 3 axes are driven by servomotors (electric): X, Y, Z (telescopic) Travel distances in axes approx.: X-2000, Y-1000, Z-1500 Automatic axis lubrication Bodpezc Nywjfx Albswt Touch control panel The safety package for robots Robot with adapter and protective housing Purchase of the robot for an additional charge Dimensions Weight: 8700 kg Length/width/height: 5.35x1.76x3.42 m All offered machines are started by our service technicians before sale. It is possible to obtain a video of technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: used, Year of construction: 2011, operating hours: 13,507 h, lifting height: 4,670 mm, fuel type: gas, mast type: duplex, power: 46 kW (62.54 HP), motor manufacturer: Mazda 4cil, fork length: 1,200 mm, color: other, Weights Empty weight: 4.490 kg Functional Lifting capacity: 2.500 kg Maximum passing height: 303 cm Number of valves: 3 Condition General condition: average Technical condition: average Visual appearance: average Other information EPA Marked: yes Fork carriage: Fork spreading Additional information Bodpfx Asv D Ec Hjlbswt Please contact Bas Sindorf for more information

Condition: used, Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG milling unit: you can rebate, groove and profile -with keying: from 2 sides each -Milling unit: swiveling -1x engines Perske -Power kW -Voltage: volts -Frequency: Hz -Speed: rpm -Other engines with other services in stock for an additional charge Bwodob R Hkpspfx Albjt -Dimensions: 650/520/H600 mm -Weight: 80 kg

Condition: used, Year of construction: 2023, 2 x Engel VC 2460/180 injection molding machines, technical version, manufactured in 2023. Bwodpfx Alezhudkjbjt

Condition: ready for operation (used), Fanuc 0551416 reduction gear for Robot R-2000iA 125L - diameter: 180mm, used, normal signs of use, 100% functional, scope of delivery as per photos Bwedpfx Asr Nqr Ielbet

Condition: new, GMN HF-Spindle HSP150DH 381 12 kW 350Hz 7000rpm 400V - Mapal SN: 378200, unused in opened original packaging, 100% functional, scope of delivery as per photos. ATTENTION: Please enquire separately for charges for packaging and shipping! Bedpoy Np Uvofx Albswt

Condition: ready for operation (used), Siemens 1HU3078-0AC01 - Z servomotor, Z = see nameplate, SN: EZJ92450302005, professionally fully overhauled and tested with 12 months warranty, 100% functional, delivery items as per photos. The agreed sales discounts do not apply to this item. Please inquire for pricing separately! Bodpfx Ajx Dvkqjlbswt

Condition: ready for operation (used), Siemens 1FK7063-2AF71-1BH0 synchronous motor SN: YFBN31899502001, professionally fully overhauled and tested with 12 months warranty, 100% functional, delivery as per photos. Bodpjy Npkkofx Albewt

Condition: like new (used), Year of construction: 2025, rotary table diameter: 1,000 mm, Equipment: rotational speed infinitely variable, - Horizontal load capacity: 1200 kg - Vertical load capacity: 600 kg - Table dimensions: 1000 mm - Electrically tiltable - Wireless remote control - Digital display Bjdpfx Aljzcyxqjbswt - Documentation - 400V

Condition: like new (used), functionality: fully functional, Year of construction: 2017, operating hours: 48 h, VERTICAL HYDRAULIC BALER MG 50 TVE Vertical hydraulic baler, model MG 50 T.V.E. 1200x1100x3500h, for compacting and baling soft material scraps such as fiberglass mats or similar. The MG 50 T.V.E. model features a fully enclosed compaction chamber, with both the material loading door and bale extraction door capable of opening. The control panel is mounted on the side of the unit with integrated controls, and is equipped with a 10-meter extension cable to allow for placement away from the baler. The pressing plate is operated by a single cylinder with a 2700 mm stroke and is guided by four lateral sliding rails. Material is loaded from the front. The compaction cycle (press descent and ascent) is automatically activated via push button. - For transportation, the machine is manufactured in three parts: one section is 2000 mm high, one approximately 2300 mm high, and the cylinder, which will be assembled on-site. - Bale tying is preset; it is done manually with the doors open. Via slots in the rear of the chamber, tying can be completed with standard pre-cut wire or strapping. - Bale extraction is carried out by forklift, with special channels at the base for the insertion of fork tines. - The bale extraction door is closed via a handwheel, ensuring safe operation even with elastic materials. A safety microswitch ensures the door is securely closed before pressing. The top loading door features a hydraulic lever closure with machine-mounted controls. - The baler can be placed flush against a wall; only front space is required for material loading and bale removal. - The hydraulic circuit is equipped with an anti-fall safety blocking valve for the press plate. - The machine must be anchored to the floor and is placed above a wash liquid collection tray. • Brand / Model: MG 50 T.V.E. 1200X1100X3500H • Pressing force: 50 tons • Pressing pressure on material: 3.8 kg/cm² Bwedpfx Aljyzr Nmsbot • Operating pressure: 220 bar • Bale size: mm 1250 x 1150, variable height (min 800 mm, max 1700 mm) • Bale weight: 400–1000 kg, depending on material • Press chamber: mm 1200 x 1100 x 3500 h • Loading opening: mm 1200 x 1800 h • Compactor stroke: 2700 mm, single cylinder • Operation: Automatic by push button • Cycle time (automatic): 130 seconds • Manual ties: No. 5 • Bale ejection: Removal by forklift • Hydraulic power unit: Integrated into press • Motor power: 10 HP – 7.5 kW • Power supply: 380 Volt – 50 Hz • Overall dimensions: mm 2000 x 3500 x 7150 h • Noise level: 78 dB • Press weight: approx. 5000 kg • Certification: CE Condition: • Used hydraulic baler in excellent condition, sold as seen and approved.

Condition: used, mileage: 342,000 km, power: 210 kW (285.52 HP), first registration: 07/2019, fuel type: diesel, overall weight: 16,000 kg, axle configuration: 2 axles, next inspection (TÜV): 09/2015, color: white, gearing type: automatic, emission class: euro6, loading space length: 8,200 mm, loading space width: 2,500 mm, loading space height: 2,300 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), tail-lift, VEHICLE HISTORY * GERMAN VEHICLE * FROM 1ST OWNER * VIDEO AVAILABLE ON REQUEST * IMMEDIATELY READY FOR USE VEHICLE EQUIPMENT * THERMO-KING T1200R-50 SPECTRUM * FOLDABLE TAIL LIFT * AUTOMATIC TRANSMISSION * LANE ASSIST * BRAKE ASSIST * HILL START ASSIST * ROCKING MODULE ASSIST * ENGINE BRAKE * CRUISE CONTROL * MULTIFUNCTION STEERING WHEEL * AIR CONDITIONING * SEAT HEATING * PARTIAL LEATHER * BODY: KIESLING BOX BODY * THERMO-KING T1200R-50 SPECTRUM * PARTITION WALL * TAIL LIFT: BÄR 1.5 TON * WHEELBASE: APPROX. 5.60M * LOADING AREA: * LENGTH: 8.20M * WIDTH: 2.50M * HEIGHT: 2.30M * GROSS WEIGHT: 16,000KG * EMPTY WEIGHT: 8,970KG * PAYLOAD: 7,030KG * FRONT AXLE: SPRING SUSPENSION-285/70 R19.5 * REAR AXLE: AIR SUSPENSION-285/70 R19.5 * 1X DIESEL TANK * 1X ADBLUE TANK * EXPORT SALES ONLY WITH DEPOSIT MIN. €500 - €2,000 EXPORT REGISTRATION CUSTOMS EXW IN 10 MIN. (AUTHORIZED EXPORTER) 5 DAYS, 30 DAYS LICENSE PLATE AND 17 - 21 DAYS AUSTRIAN LICENSE PLATE EURO 1 VEHICLE RESERVATIONS PLEASE ONLY VIA EMAIL FUNCTION VERBAL RESERVATIONS ARE NOT VALID! For sales to the EU and third countries, a deposit of at least €500.00 / €5,000.00 is required PLEASE NOTE THAT FOR SOME VEHICLES, LABELS/MARKINGS MAY BE REMOVED WITH PHOTOSHOP Bwodpfex Tbzpox Albet Subject to changes, mistakes and prior sale! You can find more vehicles on our homepage: Sale takes place exclusively according to our terms and conditions – see homepage Important notice – Important information: Despite careful checking of all details in our offer, errors may occur. Some of these are caused by transmission errors in the systems of various platform providers. Therefore, we would like to point out that all information is given without guarantee and does not constitute a legal claim. Legal Notice: This sales advertisement does not constitute an offer within the meaning of §145 BGB. Rather, it is information for contract initiation. The details provided here are given without guarantee and do not constitute warranted characteristics.

Condition: used, Year of construction: 2004, Victory 330/80 PLUS Year: 2004 Serial No.: 52863 Operating hours: 103,000 Screw: D40 CC200 A01 4-circuit water cooling 1x core pull 4x digital input, 4x digital output Few sockets ROBOT: TecnoMatic Micro 210/0184 Year: 2021 Load: 3 kg X-Y-Z – servo C – pneumatic Bwedpszcaxdefx Albot

Condition: good (used), turning height: 1,500 mm, workpiece weight (max.): 20,000 kg, turning diameter: 2,400 mm, Manufacturer: VIPER Type: VTL 20/24 M Control: Fanuc Oi-TD Year of construction: 2008 X Stroke 1835mm Z Stroke 1000mm Table load 20 Ton Ram size 230 x 230 mm Stroke cross rail 800 mm Stroke crossrail in 5 steps each 200 mm Live tools 2000 rpm Power live tools 15 kW ATC 18 station max L = 450 mm Taper BT50 BIG PLUS Full C-Axis 360,000 Under power in AEROSPACE precision plant 2020 Table bearing replaced 2020 Ram bearing replaced 2025 new chip conveyor Specifications Metric US standard Max. turning diameter 2400mm Table diameter Ø 2000 mm Tool changer 18 Speed 200 rpm Power 48 kW Max. turning height 1500 mm C-axis 360,000 ° Dimensions (estimate) Bwodev R Di Sjpfx Albjt Length 9,300 mm Width 6,300 mm Height 6,700 mm Weight 48,000 kg Please note: The information on this page has been obtained to the best of our knowledge and belief, and where possible, from the manufacturer. The information is provided in good faith, but its accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contractual terms. We recommend that you check all important details.

Condition: new, load capacity: 1,200 kg, rotary table diameter: 1,200 mm, table load: 1,200 kg, – Horizontal capacity: 1200 kg – Vertical capacity: 1200 kg – Table size: 1200 mm – Electrically tiltable – Wired remote control – Digital display Bwjdpfxowkth Ao Albjt – Documentation – 400 V

Condition: new, Year of construction: 2025, load capacity: 1,200 kg, – Horizontal capacity 1200 kg – Vertical capacity 1200 kg – Table dimension 1300 mm – Electrically tiltable – Wireless remote control – Digital display – Boreholes Ø 16 mm – Documentation – 400V Bjdjwygixepfx Albewt

Condition: used, Year of construction: 2002, operating hours: 49,100 h, functionality: fully functional, clamping force: 450 kN, overall weight: 3,300 kg, First owner Bwodjzal Thepfx Albet

Condition: new, – Horizontal capacity: 1200 kg – Vertical load capacity: 600 kg – Table size: 550 mm Bodeligqcspfx Albewt – Table size: 1000 mm – Electrically tiltable – Cable remote control – Digital display – Documentation – 400V

Condition: new, Year of construction: 2025, table diameter: 1,000 mm, – Horizontal capacity: 1200 kg – Vertical load capacity: 600 kg – Table size: 1000 mm – Electrically tiltable – Remote control with cable – Digital display Bwjdpfoliftnsx Albjt – Documentation – 400V

Condition: excellent (used), Year of construction: 2006, load capacity: 150 kg, arm reach: 2,700 mm, The KUKA KR 150 is a 6-axis industrial robot designed for high-precision and high-speed applications. With a 150 kg payload capacity and a wide working envelope, it delivers reliable performance in tasks such as welding, assembly, handling, and machining. Bodjw Nat Ispfx Albjwt Model: KR150-2 2000 Condition: Used Year: 2006 Included: Manipulator + KRC2 + KCP2 Teachpendant + All Wire Sets Please get in touch with us for a quote and also the refurbishment options. As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with the brands of KUKA, ABB, FANUC and Motoman. (Source: Kuka's Website)

Condition: good (used), Year of construction: 1995, Used radial drilling machine from Foradia Model: GR 50 1200 Arm length: 1200 mm Drilling capacity up to: 50 mm Year of manufacture: 1995 Bwsdpfx Aljytb Eyebst

Condition: good (used), Year of construction: 2010, functionality: fully functional, overall weight: 375 kg, load capacity: 3 kg, For sale is a stand-alone handling machine of the Engel brand and type ERC 13/12-F The handling unit is ready for immediate use and fully functional after assembly Technical data Year of construction: 2010 Max. handling weight: 3.5 kg X-stroke: 400 mm Y-stroke: 1,000 mm Z-stroke: 2,240 mm Y-axis: Single stroke B-axis drive: Pneumatic B-axis torque: 5 Nm Servo axes: 3 Pneumatic axes: 2 Compressed air circuits: 2 Valve positions: 6 required DI(UEK): 8 Stand height: 375 mm Connection data: 3*400 V /50HZ/16 A Rated current: 10,000 A Shelf height 900-1200 mm (depending on installation height) Bwodpfx Aovgc Skjlbst On request, transportation and loading can be arranged at extra cost. can be organized throughout Europe. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: ready for operation (used), Year of construction: 2007, operating hours: 101,500 h, clamping force: 3,000 kN, overall weight: 19,700 kg, Hydraulic injection moulding machine manufactured in 2007. This Engel Victory VC1800/300 P features a clamping force of 3,000 kN and an opening stroke of 900 mm. It includes a robust control system with a 15" TFT touchscreen and a maximum injection pressure of 1,735 bar. If you are looking to get high-quality injection moulding capabilities, consider the Engel Victory VC1800/300 P machine we have for sale. Contact us for further details. Identical Engel Victory VC 1800/300P (2008 model) also for sale — same configurations. • Power supply: 3 x 400 V + N + PE / 50 Hz • Control system: ENGEL CC200 A02 (15" TFT touchscreen) • Opening stroke: 900 mm • Maximum platen distance: 1,500 mm • Minimum mould installation height: 600 mm • Ejector stroke: 200 mm Bwedjyn Ntzjpfx Albot • Ejector force: 90 kN • Pump drive power: 37 kW • Injection unit version: M3 • Available screw diameters: 60 / 70 / 80 mm • Screw diameter installed: 70 mm • Maximum swept volume (70 mm): 1,039 cm³ • Maximum screw speed: 226 rpm • Injection rate (70 mm): 385 cm³/s • Specific injection pressure (70 mm): 1,442 bar • Maximum injection pressure (increased): 1,735 bar • Nozzle stroke: 500 mm • Nozzle contact force: 110 kN • Hours: 101,500 h • Maintenance/Service history: • Complete hydraulic hose replacement in 2025 • Motor and planetary gearbox replacement in 2021 • High-pressure cylinder replacement in 2020 • Several cost-intensive main components renewed in recent years Additional equipment • Robot: ENGEL ERC 64 (included) • Axes travel: X 1,200 mm, Y 1,300 mm, Z 3,600 mm • B-axis rotation: -90° to +270° • Vacuum circuits: 4 • Pneumatic circuits: 8 • Reject/quality conveyor belt • Box transfer for 600 x 400 x 250 mm boxes • GWK temperature control tower (optional)