Used Engel E-Max 200/100 Reinraum for sale (97,098)

Year of construction: 2014, condition: ready for operation (used), Clamping force: 1600kN, weight: 9t, operational hours counter: 3638h, with Handling Robot ENGEL viper 20. Pgsdpfxeh Nypfo Amysp

Condition: new, maximum load weight: 37,075 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete range of vehicles, including those available immediately or at short notice, on our website. Excerpt from the equipment list. Full equipment details available on request. Gooseneck: * Gooseneck with front corners beveled approx. 45° and rear taper approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN). Hardwood floor approx. 30 mm thick Pjdpfx Ajyhkqzsmyegp Loading area: * Loading area after the gooseneck hydraulically liftable/lowerable, length approx. 2,800 mm, with rear taper approx. 1,000 mm x 8° * 6 pairs of folding outward lashing rings (LC 5,000 daN) * 2 pairs of folding outward lashing rings (LC 10,000 daN) * 1 pair of inward folding lashing rings at the front central beam (LC 10,000 daN) * Cutouts in the external frame of the loading area for attaching tension belts (LC 2,000 daN) * Grating surface C40/4 (point load approx. 2.3 t on an area of approx. 20 x 20 cm), over the axles checker plate Two-piece steel ramps: * One pair of galvanized two-piece steel ramps, approx. 2,750 + 1,400 x 800 mm, with C40/4 grating (point load approx. 2.2 t on an area of approx. 20 x 20 cm) * Ramp with hydraulically folding in/out ramp sections. Hydraulic lift system, hydraulically adjustable * Maximum load per pair: approx. 40,000 kg Landing gear: * JOST landing gear (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles and suspension, 2 rigid axles, 1 self-steering axle * Technical axle load: 12,000 kg each * Electromagnetic reverse lock via reverse gear and manual activation * Air suspension with lift and lower valve Brake system: * WABCO brake system according to EU regulations with EBS-E (2S2M) Tyres: 235/75 R 17.5 3PMSF – Manufacturer of our choice TPMS: * TPMS tire pressure monitoring system in accordance with ECE R 141 Paintwork: * HRM metalizing of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminum) for optimal corrosion protection * Final paint in 2 coats of 2K topcoat, solid color in RAL 3002 Carmine Red in accordance with RAL system 841GL * Rims in silver grey Including accessories: * 2-inch kingpin * One galvanized steel front wall, approx. 400 mm high * Grating in the gooseneck taper C30/3 (point load approx. 2 t on an area of approx. 20 x 20 cm) * Grating in rear taper of the loading area C40/4 (point load approx. 3.4 t on an area of approx. 20 x 20 cm) * Non-slip sand paint on the checker plates above kingpin and loading area * Electro-hydraulic unit at the rear under the loading area * On the gooseneck: plug-in aluminium side walls and rear wall, approx. 2,440 x 400 mm (L x H). The rear galvanized drop-in stakes are removable. (Body length approx. 2,560 mm) * An electric cable winch with radio remote control, approx. 5,400 kg pulling force, including approx. 9.5 mm thick steel cable, approx. 24 m long, with cable guide pulley * Bolted 5 t ring for cable winch deflection on the neck without deflection pulley * One galvanized toolbox integrated in the beveled gooseneck with opening for a winch * Grating on the gooseneck C30/3 (point load approx. 2 t on an area of approx. 20 x 20 cm) * 7 pairs of stake pockets for plug-in stakes approx. 100 x 50 mm in the outer frame of the loading area * Lift axle on the front axle with control via TEBS E depending on current axle load and loading condition * 7 pairs comple...

Condition: new, overall weight: 58,000 kg, Year of construction: 2026, Semi-trailer, drop-deck MAX100 4 A 8.60 U Technical data Speed: 80 km/h Total weight: 60,800 kg Fifth wheel load: 18,000 kg Axle load: 42,800 kg Unladen weight: Payload: Gooseneck length: 3,850 mm Fifth wheel height (loaded): 1,250 mm Loading area length: 8,600 mm Extendable by: 5,400 mm Axle distance: 1,360 mm Rear deflection radius: 2,300 mm Loading height (max. load): 860 mm Overall width: 2,540 mm Suspension travel: -55/+145 mm Technical description Gooseneck With beveled front corners at 45° and rear bevel of approx. 760 mm x 10° 3 pairs of lashing rings (LC 5,000 daN) Hardwood flooring, 30 mm thick Loading area in extendable design with rear bevel of approx. 1,000 mm x 8° 5 pairs of lashing rings, foldable outwards (LC 5,000 daN) 3 pairs of lashing rings, foldable outwards (LC 10,000 daN) 1 pair of lashing rings, horizontally mounted at the front in the loading area (LC 10,000) Hardwood flooring, approx. 48 mm thick, with diamond plate steel over the axles Ramps Two-part steel ramps One pair of galvanized two-part steel ramps, approx. 2750 + 1400 mm x 800 mm, with approx. 48 mm thick hardwood flooring Ramp with hydraulic up and folding ramp sections, hydraulic lifting mechanism and hydraulically adjustable. Maximum load per pair: 40,000 kg Tires 235/75 R 17.5 Braking system according to EU regulations with EBS-E (4S3M) without connection lines to the tractor unit Paintwork First-class, durable corrosion protection of the standard bead-blasted welded frame guaranteed by a 2-component zinc dust primer High-quality 2-component (2K) topcoat, solid color in RAL color shades of your choice Rear section metallized and painted in RAL 9010 (pure white). Fifth wheel: Pgedpfx Amog Sk T Djyop JOST fifth wheel (mechanical) with 2-speed gear for 24 t Lifting capacity (50 t test load) Steel construction made of high-strength fine-grain steels. Steel grades: Steel construction made of high-strength fine-grain steel S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Electrical system according to EU regulations, lighting LED 24 Volt ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX on the connection bar at the front with sockets 24N, 24S & 15-pole. Connection according to ISO. 24N ISO-1185 24S ISO-3731 15-pole ISO-12098 Accessories included: One galvanized steel front wall, approx. 400 mm high. 2" Kingpin 4 wheel chocks with holder on the front wall. One bracket for a rotating beacon on the rear of the trailer. SAF axles, two fixed axles, one steered axle, air-suspended, with drum brake, with lifting/lowering function. The trailing steered axle with electro-magnetic reverse lock, which can be activated via reverse gear or manually. Axle tool. Mounting in the rear area of the gooseneck for ALU support ramps. Galvanized folding supports under the bevel of the loading area. Mechanical locking of the locking of the loading area. One spare wheel with holder in front of the front wall. Yellow reflector tape according to EU regulations on the sides, on the extension and at the rear of the trailer. Yellow-red air couplings on the galvanized connection bar at the front. On the gooseneck and on the rear panel, one bracket each on the left and right for the warning signs including socket. One mudflap on the rear of the trailer. Manual and description On the gooseneck, plug-in ALU side and rear panels, approx. 2,440 x 400 mm (L x H). The rear galvanized plug-in posts are removable. Length of the superstructure approx. 2,560 mm, +/- 46 kg 3 pairs of WADER container po

Year of construction: 2012, condition: good (used), robot 40 RC 200 X= 700mm Y= tandem 1600mm Z= 3320mm B + C Servo year: 2012 Pgedpfxegkvtxe Amysp price: 8.900€ contact person: Mr. Rainer Eckerle

Condition: refurbished (used), filter area: 459 m², pressure: 15 bar, cake thickness: 30 mm, Plant: Chamber filter press, tunnel design, second-hand Design: head-guided Filter plate format: 1200x1200 mm Number of chambers: 100 Cake thickness: 30 mm Filter plates: PP Filter cloths: optionally available in coordination with the medium Drain: closed Filter area: approx. 459 m² Press capacity: approx. 2999 dm³ Pedeqa Dv Tspfx Amysgp Filter pressure: 15 bar Closing pressure: 380 bar Operating temperature: min. 10° max. 50° Plate transport: automatic Closing: electro-hydraulic Motor voltage: 380 V Control voltage: 230 V - 24 V Control cabinet: included Accessories: optional according to customer requirements and design Safety device: optional Condition: This system is available as a used system - ready for operation. Refurbished service: optional - The system is refurbished after receipt of order. Special service: optional - The system is set up according to your requirements after receipt of the order. Purchase or rental: Viewings of the systems by arrangement at our factory.

Year of construction: 2005, condition: ready for operation (used), A total of four Engel injection molding machines are available. 1) Engel ES 80/25 HL-V, year of manufacture: 1999, the machine is a defective spare parts carrier. 2) Engel ES 80/25 HL-V, year of manufacture: 2001. 3) Engel VC 200/45 Tech, year of manufacture: 2004. 4) Engel e-Motion 200/55, year of manufacture: 2005. Documentation available. On-site inspection is possible. Individual sale possible. Pgsdpfxev Extzo Amysp

Condition: ready for operation (used), Year of construction: 2018, operating hours: 17,000 h, functionality: fully functional, machine/vehicle number: 222866, clamping force: 3,000 kN, screw diameter: 70 mm, displacement volume: 1,120 cm³, overall weight: 7,100 kg, TECHNICAL DETAILS Clamping force: 3,000 kN Screw diameter: 70 mm Shot volume: 1,120 cm³ MACHINE DETAILS Weight: 7,100 kg Operating hours: 17,000 hours Psdpfxow N In Hs Amyjgp EQUIPMENT Barrier screw with homogenizing unit and mixing head Cleanroom suitability

Condition: new, maximum load weight: 38,140 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available immediately and at short notice, on our website. Excerpt from equipment. Full equipment details available on request. Gooseneck: - Gooseneck with front corners chamfered approx. 45° and rear bevel approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Hardwood flooring, approx. 30 mm thick Loading area: - Telescopic loading area with rear incline approx. 1,000 mm x 8° - Between 1st and 2nd axle: one pair of fixed wheel recesses, approx. 1,610 x 970 x 400 mm (L x W x D) - Incl. 3-piece removable galvanized cover over wheel recesses (width approx. 670 mm – max. point load 5 t / pc.) - 1 pair of flat lashing rings at the front of the loading area (LC 10,000 daN) - 4 pairs of outward folding lashing rings (LC 5,000 daN) - 3 pairs of outward folding lashing rings (LC 10,000 daN) - Cutouts in the outer frame for attaching tie-down straps (LC 2,000 daN) Psdjw Tpq Depfx Amysgp Landing legs: - JOST landing legs (manual) with 2-speed gearbox for 24 t lifting capacity (50 t test load) Tyres: - Tyres 235/75 R17.5 3PMSF, make at our discretion - TPMS tyre pressure monitoring system in accordance with ECE R 141 - Data transfer to the towing vehicle via standardised EBS interface as per ISO 11992 - For correct display, the towing vehicle must be able to receive and display this data Axles: - BPW axles and suspension, 2 axles rigid, 3rd axle self-steering - Technical axle load: 12,000 kg - Electromagnetic reverse lockout activated automatically when reversing and manually - Air suspension with lifting and lowering valve. Axle tools Braking system: - WABCO braking system according to EU regulations with EBS-E (2S2M) without piping to the tractor unit Electrical system: - Electrical system per EU regulations - LED lighting 24 Volt ASPÖCK-NORDIK (ASS3) - All LED side marker lights flash with the indicator - ASPÖCK-UNIBOX at front connection strip with 24N, 24S & 15-pin sockets, according to ISO; 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Steel construction: - Steel structure made of high-strength fine-grained steels - Steel qualities: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Paintwork: - Complete steel structure automatically shot-blasted after welding in a wheel-blasting system - Second shot-blasting with corundum for optimum coating adhesion - HRM metallization of entire chassis with ZINACOR 850 (85% zinc/15% aluminium) for maximum corrosion protection - Final painting with 2 layers of 2K topcoat, single-colour in RAL 3002 Carmine Red, rear section metallized and painted in RAL 9010 Pure White - Metallic finish not available - Paint structure tested in salt spray test according to ISO 9227-NSS - Internal cavities sealed with special wax Including the following accessories: - On the gooseneck and rear, left and right, one holder for warning signs each, including socket - Spare wheel holder in front of the front wall (without spare wheel) - 2-inch king pin - Galvanized steel front wall, approx. 400 mm high - Yellow-red air couplings on the galvanized front connection bar - Galvanized folding supports under the inclination at the rear of the loading area - A hardwood crash protection strip at the rear wall from gooseneck to the loading area - 1 pair of recessed lashing rings along the central beam at the rear inclination (LC 10,000 daN) - Aluminium drop sides and tailgate on the gooseneck

Year of construction: 2013, condition: good (used), robot Engel Viper 20 RC 200 X= 700mm Y= tandem 1500mm Z= 2840mm B + C Servo year: 2013 price: 7.500€ Pedpshqmpxjfx Amyjgp contact person: Mr. Rainer Eckerle

Year of construction: 2012, condition: good (used), robot Engel Viper 20 RC 200 X= 700mm Y= tandem 1500mm Z= 2840mm B + C Servo year: 2012 price: 9.400€ contact : Mr. Rainer Eckerle Pgjdegpwgaspfx Amyjp

Condition: new, maximum load weight: 37,075 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete range of vehicles, including immediately available and short-term delivery vehicles, on our website. Sample of the equipment. Full equipment details available on request. Neck (Gooseneck): * Gooseneck with front corners bevelled approx. 45° and rear bevel approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Loading Platform: * Loading area behind the gooseneck hydraulically liftable and lowerable, length approx. 2,800 mm, with rear bevel approx. 1,000 mm x 8° * 6 pairs of external foldable lashing rings (LC 5,000 daN) * 2 pairs of external foldable lashing rings (LC 10,000 daN) * 1 pair of internal foldable lashing rings at the central beam front (LC 10,000 daN) * Cut-outs in the outer frame of the platform for hooking in tensioning straps (LC 2,000 daN) * Grating flooring C40/4 (point load approx. 2.3 t over an area of approx. 20 x 20 cm), treadplate flooring over the axles Two-piece Steel Ramps: * One pair of galvanized two-piece steel ramps, approx. 2,750 + 1,400 x 800 mm, with grating surface C40/4 (point load approx. 2.2 t over an area of approx. 20 x 20 cm) * Ramp with hydraulically folding ramp sections * Hydraulic lift unit, hydraulically adjustable * Maximum load per pair: approx. 40,000 kg Landing Legs: * JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lift capacity (approx. 50 t test load) Axles: * BPW axles and suspension, 2 fixed axles, 1 self-steering axle * Technical axle load: 12,000 kg each * Electromagnetic reversing lock automatic via reverse gear and manual activation * Air suspension with lift and lower valve Braking System: * WABCO braking system in compliance with EU regulations with EBS-E (2S2M) Tyres: Tyres 235/75 R 17.5 3PMSF – make at our discretion TPMS: * TPMS tyre pressure monitoring system according to ECE R 141 Paintwork: * HRM metallisation of the complete vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminium) to ensure maximum corrosion protection * Final coating with 2 layers of 2K topcoat, single-coloured in RAL 3002 Carmine Red as per RAL System 841GL * Rims in silver grey Accessories included: * 2-inch king pin * Galvanized steel front wall approx. 400 mm high * Grating in the gooseneck bevel C30/3 (point load approx. 2 t over an area of approx. 20 x 20 cm) * Grating in the platform bevel C40/4 (point load approx. 3.4 t over an area of approx. 20 x 20 cm) * Electric-hydraulic unit at the rear under the platform * Plug-in aluminium side and rear boards on the gooseneck, approx. 2,440 x 400 mm (L x H). Rear galvanized insert stanchions removable. (Body length approx. 2,560 mm) * Electric winch with radio remote control, approx. 5,400 kg lifting capacity, including approx. 9.5 mm thick steel cable, approx. 24 m long, with cable guide roller * Bolted approx. 5 t ring for winch cable loop on the neck without deflection pulley * One galvanized toolbox integrated in the sloped gooseneck with opening for a winch * Grating on the gooseneck C30/3 (point load approx. 2 t over an area of approx. 20 x 20 cm) * 7 pairs of stanchion sockets for plug-in stanchions, approx. 100 x 50 mm, in the outer frame of the platform * Lift axle on the front axle, controlled by TEBS E depending on actual axle load and current loading status * 7 pairs of recessed lashing rings along the central beam (LC 5,000 daN): 2 pairs in the lift bed, 5 pairs in the rear section of the platform Pgedpfx Ajyhkrremyop

Condition: new, maximum load weight: 39,720 kg, overall weight: 50,960 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Sample equipment features. Full specification upon request. Gooseneck * With beveled front corners approx. 45° and rear bevel approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring, approx. 30 mm thick Loading Platform Loading platform in extendable design * 5 pairs of fold-out outer lashing rings (LC 5,000 daN) * 3 pairs of fold-out outer lashing rings (LC 10,000 daN) * 1 pair of recessed lashing rings at the front of the loading platform (LC 10,000 daN) Psdpou Sd U Uofx Amyegp * Recesses in the outer frame of the loading platform for securing straps (LC 2,000 daN) * Hardwood flooring approx. 48 mm thick, over axles with chequer plate covering Landing Gear * JOST (mechanical) with 2-speed gearbox, approx. 24 t lift capacity (approx. 50 t test load) Axles * BPW axles: 2 fixed axles, 2 steering axles, drum brakes * Air suspension with lift/lower function * Self-steering axle with electro-magnetic reverse lock, activated via reverse gear or manually * Tires: 205/65 R 17.5 Brake System * Wabco brake system in accordance with EU directives with EBS-E (4S3M), without interconnecting lines to the tractor unit Steel Construction * Made of high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690QL/S700MC (yield strength 690MPa) Paintwork * First-class, durable corrosion protection of the standard shot-blasted welded frame, guaranteed by a 2-component (2K) zinc dust primer * High-quality 2-component (2K) top coat, single-color, RAL 3002 Carmine Red * Rear section metallized and painted in RAL 9010 (Pure White) * Rims in silver Accessories Included * 2-inch king pin * Galvanized front steel bulkhead approx. 400 mm high * Spare wheel holder in front of bulkhead * Yellow-red air couplings on galvanized connector bar front * 4 wheel chocks with holder at bulkhead * Bracket at rear of gooseneck for aluminum loading ramps * Galvanized folding supports under inclined edge of loading platform * Holder for beacon at rear of trailer * Yellow reflective tape on sides, extension, and rear in accordance with EU regulations * Brackets for warning signs with socket on both sides at the gooseneck and rear panel * TPMS tire pressure monitoring system per ECE R 141. Data transmission to the tractor unit via standardized EBS interface according to ISO 11992; for correct display, the tractor unit must support data transmission and display * Plug-in aluminum side walls and tailgate on gooseneck, approx. 2,440 x 400 mm (L x H); rear galvanized stakes are removable (body length approx. 2,560 mm) * Galvanized toolbox, integrated in gooseneck slope * 6 pairs of WADER container locks in loading platform, for 1 x 20' container, 2 x 20' containers or 1 x 40' container * Sliding mounting rails for aluminum ramps at rear of vehicle * 7 pairs of stake pockets for plug-in stakes approx. 100 x 50 mm, in the outer frame of the loading platform * Galvanized cross bracket under the loading platform * Galvanized extendable widenings, extendable approx. 230 mm per side * Lift axle on front axle, controlled via TEBS E according to current axle load and load status * 5 pairs of recessed lashing rings along the central beam (LC 5,000 daN)

Condition: used, Plant: Used membrane filter press Type: Passavant Noggerath Application area: Sludge dewatering Design: Sidebar frame Filter plate size: 1200x1200 Number of plates: 100 units / membrane-mix Filter plates: PP Filter cloths: optionally available, tailored to the medium Press volume: approx. 2900 dm3 Filter pressure: approx. 15 bar Pump technology: optional Purchase or rental: Inspection of the plant possible by appointment at our facility. Pgsdjwy H Nropfx Amyop

Condition: used, first registration: 04/2002, Make: KRONE Type: SDR 27 Vehicle type: Refrigerated trailer First registered / 04/2002- Loading area: 13.40 x 2.47 x 2.70 m Tires: 385/65 R22.5 Tread depth in mm: 4/3/3/8/3/4 Axle configuration: SAF / pneumatic Total weight: 36,000 kg Unladen weight: 7,400 kg Equipment: CARRIER MAXIMA 1200 As seen or advertised, without any additional services or accessories. Our offer generally does not include a new TÜV inspection. If a new TÜV inspection is required, we would be happy to provide you with a quote from our partner workshops! The vehicle can be covered with advertising and/or lettering. Our general terms and conditions of delivery and payment apply. We support you with exports, preparing export documents, obtaining license plates, supplier declarations, etc.! The information provided in advertisements, on the internet, on price tags, and in pictures are non-binding descriptions and do not constitute guaranteed properties. The seller assumes no liability or warranty for typos or data transmission errors. Listed features may need to be checked separately. We expressly reserve the right to prior sale, as we also offer this item on other portals. Information about accessories is provided without guarantee. Subject to change, prior sale, and errors. We offer and strongly recommend viewing and inspection to ensure that the buyer is not misled about the condition and suitability. Viewings and inspections are possible at any time by appointment and are expressly desired. Pgsdpfx Asv Ndhfemyop

Condition: refurbished (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 234S, total length: 2,400 mm, total width: 800 mm, total height: 1,255 mm, overall weight: 330 kg, input voltage: 400 V, type of input current: three-phase, power: 2.5 kW (3.40 HP), year of last overhaul: 2025, input frequency: 50 Hz, conveyor belt width: 200 mm, CRM NEXUS 200/1100 chop cutter for whole loins (section 195 x 200 x 1000 mm) 2011 machine, fully overhauled and refurbished in October 2025 Up to 170 slices per minute Cuts with bone Machine in perfect condition Equipped with a cover over the buttons for cleaning Psdpfjxwdmyox Amyegp

Condition: used, mileage: 12,723 km, power: 135 kW (183.55 HP), fuel type: electric, gearing type: automatic, axle configuration: 4x2, wheelbase: 3,300 mm, first registration: 06/2023, color: white, number of seats: 3, Year of construction: 2023, Equipment: ABS, air conditioning, central locking, cruise control, electronic stability program (ESP), fog lights, immobilizer system, navigation system, parking sensors, seat heater, sliding door, traction control, = Additional options and equipment = - Air conditioning - Rear parking sensors - Front parking sensors - Right-hand side sliding door - Android Auto - Apple CarPlay - Automatic dipped beam - Heated exterior mirrors - Front electric windows - Electrically adjustable exterior mirrors - Driver airbag - Remote central locking - Height-adjustable driver's seat - Height-adjustable steering wheel - Keyless start Pgodpfjzp Rirsx Amyep - Collision mitigation via braking - Collision warning system - Leather steering wheel - Multimedia interface - Fog lights - Rain sensor - Reversing camera - Headlamp assistant - Seat heating - Voice control - Lane keep assist - Immobilizer - Tachograph - Connected services - WiFi hotspot - Heated windscreen - Partition wall = Further information = General information Number of doors: 5 Model range: Feb. 2022 - 2026 Cab type: single Technical information Torque: 430 Nm Transmission Transmission: 1-speed automatic Dimensions Length/Height: L2H2 Dimensions (L x W x H): 553 x 206 x 255 cm Weights Unladen weight: 2,494 kg Payload: 1,006 kg Gross vehicle weight: 3,500 kg Battery Existing battery: Purchased Battery: 68 kWh, condition: 98% Charging port: Type 2 Fast charging capability: yes Fast charging port: Combined Charging System Interior Interior: black Maintenance, history, and condition General inspection (TÜV/MOT): valid until 06/2027 Number of keys: 2 (2 remote controls) Product safety Manufacturer: Oostland Automobielen Wasaweg 22 9723JD GRONINGEN, NL

Condition: excellent (used), functionality: fully functional, mileage: 355,000 km, first registration: 12/1995, fuel type: diesel, overall weight: 10,000 kg, wheelbase: 3,690 mm, fuel: diesel, color: white, emission class: euro2, Year of construction: 1995, Equipment: air conditioning, airbag, crane, differential lock, fog lights, full service history, IVECO EUROCARGO 100 E 15 truck 3-sided tipping body PM 8024 crane with hydraulic extensions Year 12/1995 Body length: 4,200 mm Wheelbase: 3,690 mm Overall length: 6,600 mm Gross weight: 10,000 kg Payload: 4,200 kg 6-speed manual gearbox Leaf spring suspension Differential lock Air conditioning ABS Pedpfx Amsy Aki Ioyogp Electric mirrors and windows Radio 355,000 km.

Condition: ready for operation (used), functionality: fully functional, mileage: 750,000 km, power: 132 kW (179.47 HP), first registration: 10/1997, fuel type: diesel, number of seats: 59, emission class: euro2, color: yellow, brakes: engine braking, Year of construction: 1997, Equipment: ABS, air conditioning, airbag, fog lights, IVECO 100 E18 E2 48 CACCIAMALI TEMA 16/2 (School bus), year 1997, 2 axles, FIAT 8060 45B engine, output 180 HP (132 kW), manual transmission, air conditioning, Euro 2, length 9,195 mm, width 2,400 mm, height approx. 3,000 mm. Cacciamali Tema 16/2 body, type-approved as a school bus with 59 seats. Equipped with rear air suspension, ABS, tires 225/75 R17.5 (128/126M), GVW 8,600 kg, kerb weight 3,600 kg. Vehicle in good operational condition, ideal for school transport. Mileage: 750,000 km. Pgodexqgmpepfx Amyjp

Condition: new, mileage: 10 km, power: 100 kW (135.96 HP), fuel type: electric, color: white, gearing type: automatic, number of seats: 3, Equipment: ABS, central locking, electronic stability program (ESP), navigation system, Your direct contact: Andreas Kawa, Head of Sales Commercial Vehicles – Phone: | Email: Enhanced LED cargo area lighting (5W + 10W) Protective wooden cargo floor (9mm, non-slip) CONNECT PACK Pgjdsznrl Sspfx Amysp LED headlights, LED daytime running lights Glazed and insulated partition PACKAGE "E-WORKSITE" Double co-driver seat incl. Moduwork COMFORT PACK Additional equipment: Airbag driver/passenger side, audio controls on the steering wheel, RCC DAB audio system (radio/CD player MP3-capable), double co-driver seat, on-board computer, rear parking assist, electric motor 100 kW (cont. 57 kW), driver assistance system: emergency call and assistance system (CITROEN Connect), rear wing doors without glazing, HV battery 75 kWh (lithium-ion), body/superstructure: van, charging cable with Type 2 connector (Mode 3), charging device on-board charger 11 kW, steering column (steering wheel) mechanically adjustable in height/length, headlight range adjustment, model upgrade, parking brake electric, wheelbase 3275 mm, safety package (DZVOE), sliding door right without window, front left seat adjustable in height, seat cover/upholstery: fabric Curitiba, special paint Ice White / Kaolin White, socket (12V connection) 3-fold, socket (12V connection) in the cargo area, rain sensor Errors, changes, and sales prior to publication – the information on equipment in this advertisement does not constitute a guaranteed characteristic in the legal sense and serves solely for general information. Binding equipment features are exclusively subject to the purchase contract.

Condition: used, mileage: 23,135 km, power: 154 kW (209.38 HP), first registration: 08/2002, fuel type: diesel, empty load weight: 7,105 kg, maximum load weight: 3,045 kg, overall weight: 10,150 kg, tire size: 335/80R22.5, axle configuration: 4x4, color: red, driver cabin: other, gearing type: mechanical, emission class: euro3, suspension: steel, number of seats: 9, Equipment: ABS, all wheel drive, cabin, differential lock, parking heater, trailer coupling, Vehicle location: Bovenden, crew cab, sun visor, auxiliary heater, 6-speed manual gearbox, ABS (anti-lock braking system), frame covers, differential lock, rotating beacon, storage box. Body: Magirus fire engine LF 8/6 with 600-litre water tank and built-in FPN 8/8 fire pump, several units available from EUR 15,000 to EUR 39,000. Sale to business customers or for export is subject to an additional 19% VAT! ACCESSORY INFORMATION WITHOUT WARRANTY; subject to changes, interim sale, and errors! Pgedpfx Aevmhudsmyep

Year of construction: 2003, condition: used, functionality: fully functional, maximum load weight: 100 kg, total length: 1,965 mm, total width: 1,970 mm, total height: 2,550 mm, loading space volume: 2 m³, machine/vehicle number: 03108, Heavy-Duty 100 kg Steam-Heated Industrial Tumble Dryer for Garment & Textile Processing The Triveneta Grandi Impianti E/100 R.V. is a heavy-duty industrial steam-heated tumble dryer manufactured by Triveneta Grandi Impianti S.r.l., Italy. Designed for continuous industrial laundry and textile finishing operations, this high-capacity dryer is ideal for garment manufacturing, denim production, commercial laundries, and other high-volume drying applications. This unit (MASI internal reference K672) was used in professional apparel production until the factory shutdown and remained operational. Technical Specifications • Manufacturer: Triveneta Grandi Impianti S.r.l. • Model: E/100 R.V. • Machine Type: Industrial Steam-Heated Tumble Dryer • Serial Number: 03108 • Year: 2003 • Country of Manufacture: Italy • Maximum Load Capacity: 100 kg • Heating System: External Steam Supply • Power Supply: 400 V, 3-Phase, 50 Hz • Machine Weight: Approximately 1,450 kg • Dimensions: • Width: 1,970 mm • Depth: 1,965 mm • Height: 2,550 mm Pgodpfxjzmwdks Amyjp Key Features • High-capacity industrial drying drum • Steam-heated drying system • Digital microprocessor control • Programmable drying cycles • Pneumatic door opening system • Stainless steel front loading door • Twin exhaust and ventilation system • Integrated lint filter housing • Emergency stop system • Heavy-duty industrial construction • Designed for continuous production environments Includes • Triveneta Grandi Impianti E/100 R.V. tumble dryer • Integrated microprocessor control panel • Steam connection interfaces • Lint filtration system • Pneumatic door system • Industrial support frame Applications • Garment manufacturing • Denim production • Industrial laundry operations • Textile finishing • Commercial laundry facilities • Industrial garment drying • High-volume textile processing Condition • Fully operational prior to factory shutdown • Previously used in professional garment production • Good industrial condition • Structurally complete • Normal cosmetic wear consistent with industrial use • Minor surface oxidation around the door frame • Available for inspection before dismantling Location Valga, Estonia Dismantling & Transport Buyer is responsible for disconnecting steam, electrical, and utility connections, dismantling, loading, transportation, and all related costs. Professional rigging and lifting equipment are recommended due to the machine's approximately 1.5-tonne weight. Sales Terms Sold as-is, where-is, without warranty. Part of the MASI JEANS factory liquidation. The machine is available individually or together with the complete industrial laundry and finishing line.

Condition: used, Neue Nummerierwerke - New Numbering units Zeisser 100/200 ZAVSome Numbering heads ZEISSER - NEW Online-Video-Inspection by Skype-Video Podpfx Ajh Ax Hxemysgp We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: excellent (used), Year of construction: 2008, Mossini press Drive: Servo Pgjdpfezl R Hvjx Amyep Pressing force: 2,000 kN Stroke adjustment: 20 - 100 mm Stroke rate: 30 - 90 strokes/min Ram adjustment: 100 mm Tool installation height: 455 mm Year of manufacture: 2008

Condition: excellent (used), CTS Type: TSS-70/350-A Water-cooled cooling unit For sale is a high-quality temperature shock testing chamber from CTS (Clima Temperatur Systeme), model TSS-70/350-A. The unit is used for carrying out temperature shock tests and is typically used in industry, research, and quality assurance. Application areas: Material testing Aging tests Electronics and component testing Temperature shock and cyclic temperature tests Technical data: Type: TSS-70/350-A Temperature range: Hot chamber: +50°C to +200°C Cold chamber: -70°C to +100°C Pjdpfx Asy Hkgbomyogp Electrical data: Connection: 400 V, 3/N, 50 Hz Rated power: approx. 20.4 kW Rated current: approx. 36.5 A Refrigeration system: Refrigerant: R404A / R23 Pre-cooling stage: approx. 6.0 kg Cooling stage: approx. 3.0 kg Water-cooled Equipment / Features: CTS control panel with touch display Microprocessor-controlled control and monitoring system Program operation Digital setpoint and actual value display 2-zone system (hot and cold chamber) Automatic moving platform for shock tests Technical design: Hot and cold chambers are separate Moving platform system for rapid temperature changes Test chamber made of stainless steel Insert shelf / grating Viewing window in the door Water cooling connections available Control cabinet integrated Dimensions: External dimensions (H x W x D): approx. 2450 x 2160 x 2200 mm Internal dimensions (H x W x D): approx. 610 x 850 x 680 mm Weight: approx. 2500 kg Additional data: Protection class: IP 54 Operating overpressure: approx. 25 bar Test pressure: approx. 27.5 bar For your security as a buyer, the following information is provided! The following points will be carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers will be subjected to a documented test run. Condition: used Scope of supply: see pictures (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: excellent (used), CTS Type: TSS-70/130 Water-cooled refrigeration unit For sale is a high-quality thermal shock test chamber by CTS (Clima Temperatur Systeme), model TSS-70/130. This device is designed for performing thermal shock tests and is typically used in industry, research, and quality assurance. Application Areas: - Material testing - Aging tests - Electronics and component testing - Thermal shock and temperature cycling tests Technical Specifications: Type: TSS-70/130 Test volume: 130 liters Temperature range: - Hot chamber: +50°C to +200°C - Cold chamber: -80°C to +100°C Heating rate: approx. 6 K/min from ambient temperature to +180°C Cooling rate: approx. 4 K/min from ambient temperature to -60°C Temperature deviation: - ±1 K over time - ±2 K spatially Temperature change rate: - max. 100 K/min average for shock test mode (no radiant heat) Transfer time between chambers: - ≤ 15 min for -65°C to +200°C with 10 kg ICs Changeover time: - < 10 seconds Electrical Specifications: Connection: 400 V, 3/N, 50 Hz Nominal power: approx. 17.2 kW Nominal current: approx. 29 A Site fuse: 32 A slow-blow Connection: Cekon 32 Refrigeration System: Refrigerant: R404A / R23 Water-cooled, low noise, fully hermetic Features/Equipment: - CTS control panel - Microprocessor-controlled regulation and monitoring system - Programmable operation (up to 100 test programs) - Digital setpoint and actual value display - RS232 interface - 2 free switching channels for external device control - Fault notification via volt-free contact (Loadable up to 30 V DC, 2 A) - EMC tested Technical Construction: - Hot and cold chambers - Transfer basket with spindle drive Pjdoy Hkd Hjpfx Amyjgp - Test chamber/transfer basket made of stainless steel (material no. 1.4301) - Stainless steel wire insert basket - Tube port NW 50 with sealing plug - Compressed air connection 1/4" male - Non-pressurized condensate drain R 1/2" female thread - Safety door locking - Lockable door with window Dimensions (according to installation diagram): External dimensions approx.: 2335 x 940 x 1820 mm Installation clearance approx.: 1990 x 940 x 1652 mm Test chamber internal dimensions: height approx. 410 mm, width approx. 480 mm, depth approx. 660 mm Window: 300 x 300 mm Additional Data: Protection class: IP 22 Sound pressure level: < 60 dB(A) Weight: approx. 950 kg Average consumption during test cycle: approx. 8 kWh Important information for your safety as a buyer! The following points are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, chambers undergo a documented test run. Condition: used Scope of delivery: see photos (Specifications subject to change and errors excepted.) For further questions, please feel free to contact us by phone.