Used Cronosstech Chksp 80/30 for sale (37,540)

Condition: new, machine/vehicle number: 7272fc3b6a97f9be58a222f05, empty load weight: 5 kg, maximum load weight: 32 kg, overall weight: 38 kg, axle configuration: 3 axles, tire size: 385/65 r22.5, Further information Chassis Saddle Container Fine-grained steel welded construction, fifth wheel plate with interchangeable 2 kingpins and 2 kingpin positions Front locking on tipping ram support frame with incl. guide wedges on both sides Incl. guide wedges, rear locking on continuous pivot shaft with return spring Without subframe for self-supporting containers Container mounts: Locking cross member, 2-fold for locking 1 x 30 foot or 1 x 40 foot container. Adjustment via central telescope as an interlocking central tubular frame with bolt lock. Optimum fifth wheel load when transporting 30 foot and 40 foot containers. 24 to. 2-speed support winch, single-sided operation, with straight lower section, without thrust compensation 2 wheel chocks with holder Aluminium side bumper Galvanized steel underride guard Half-shell mudguards Lsdoi Riv Eopfx Ancjaa with anti-spray flaps according to EG Hydraulics 100 Low-pressure cylinder max. 150 bar, with HDK screw socket, fixed part, NW 48 mm. (without hose connection) Hydraulic actuation via truck power take-off Incl. Hydraulic connection with hose and HDK screw plug NW = 48 mm with knurled nut Axles + suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser-measured Reduction in tire wear and fuel consumption Axle spacing offset mm (combined transport) up to 44 tons gross train weight Air suspension Brake system 170 2-line compressed air brake system Colored line routing for easy service. Spring-loaded parking brake Tele Control Axle relief for easy telescoping 2 swap-proof coupling heads at the front, without connecting cable EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! with lifting & lowering valve Vehicle stability system Axle load detection via EBS-Canbus signal, for indication via display in the driver's cab, truck must be prepared accordingly, no truck instal. calibrated scales) Wheels and tires 385/65 R22.5 make of the manufacturer's choice Steel rims, factory silver Electrical system 24 volt, multi-chamber lights, amber LED lighting at the sides 2 white position lights at the front 2 white/red rear lane departure lights 2 x 7-pin interchangeable sockets at the front, without connecting cable 2 additional LED work lights at the rear, switched via reversing light

Condition: excellent (used), Year of construction: 2005, travel distance X-axis: 2,340 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 600 mm, feed rate X-axis: 40,000 m/min, feed rate Y-axis: 40,000 m/min, feed rate Z-axis: 40,000 m/min, controller manufacturer: HeidenHain iTNC530, total height: 3,100 mm, total length: 6,500 mm, total width: 3,100 mm, table width: 750 mm, table length: 2,900 mm, table load: 2,800 kg, spindle motor power: 27,000 W, 3-axis CNC machine (VMC) Hedelius - BC80 /2300 Make: Hedelius Type: BC80 /2300 Control: HeidenHain iTNC530 Year: 2005 X - Travel: 2340mm Lajdpfx Aey Enzaencja Y - Travel: 800mm Z - Travel: 600mm Table Length: 2900mm Table Width: 750mm Table load: 2800 Feed rate X-Axis: 40000mm/min. Feed rate Y-Axis: 40000mm/min. Feed rate Z-Axis: 40000mm/min. Spindle Taper: 40ISO/Bt/Mk Power on spindle: 27kW Speeds / ranges: 8000Rpm ATC / revolver: 30 Coolant through spindle / Bar:20 Number of controlled axis: 3 Chip conveyor: Yes Coolantsystem: Yes Length: 6500mm Width: 3100mm Height: 3100mm Weight: 13500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 6,259 h, load capacity: 3,000 kg, lifting height: 3,100 mm, free lift: 150 mm, fuel type: electric, mast type: simplex, construction height: 2,240 mm, fork carriage width: 1,120 mm, fork length: 1,800 mm, empty load weight: 5,614 kg, total length: 2,317 mm, drive type: Elektro, construction width: 1,198 mm, Electric 4-wheel forklift Load center: 500 mm Fork width: 125 mm Fork thickness: 50 mm ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Standard Technical condition: Very good Front tires type: Super elastic Front tires size: 23x10-12 Front tires condition: 40 - 60% Laodsy Eizhspfx Ancsa Rear tires type: Super elastic Rear tires size: 200/50-10 Rear tires condition: 20 - 40% Battery voltage: 80V Battery capacity: 620Ah Battery manufacturer: Jungheinrich Battery type: PzS Year of battery manufacture: 2020 Battery condition: 60 - 80% Description: Inspection and safety check (UVV) newly completed Side shifter, fork positioner, 3rd valve, 4th valve, rear work light, front work light, roof cover, front windscreen, half cabin, heater, road-legal (STVZO), full cabin, safety light, 2-pedal control, joystick (Duo-Pilot), ultra comfort seat (fabric + air-suspended), hydraulic steering, spring-loaded brake, multi-color display, seat heating, rear floor spot, LED work lights, battery can be reconditioned on request (at extra cost)

Condition: like new (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 66342/1B, conveyor belt length: 3,100 mm, conveyor belt width: 400 mm, conveyor belt speed: 50 mm/s, total height: 2,100 mm, input voltage: 480 V, input frequency: 60 Hz, For sale is a high-quality Schuma incline conveyor from the professional PRO-WAA series. Thanks to its robust construction, this belt is ideal for continuous industrial operation. Technical data: Manufacturer: SCHUMA GmbH Model: PRO-WAA 800/2000/400/300/S20 Lsdpfx Asy Ec Uzoncoaa Serial number: 66342/1B Year of manufacture: 2023 Voltage: 480 V Frequency: 60 Hz Power: 0.18 kW Dimensions & geometry: Overall width (belt): approx. 400 mm Horizontal length (lower): approx. 800 mm Incline section (length): approx. 2000 mm Horizontal length (upper/discharge): approx. 300 mm Cleat height: 20 mm (S20) – ideal for small parts, granulates, or plastic components.

Condition: good (used), Clamping plate, marking-spotting plate, measuring plate, measuring table, welding table, welding table, straightening plate, marking plate, straightening table -Clamping plate: with support ribs, on a solid base frame -Clamping surface: 800 x 800 mm -Table height: 930 mm -Plate thickness: 25 mm Lsdswclcijpfx Ancsaa -Transport dimensions: 800/800/H930 mm -Weight: 235 kg

Condition: excellent (used), CATALOG NUMBER 6059 TECHNICAL DATA - Number of horizontal spindles: 2×20 pcs - Number of vertical spindles: 1×20 pcs - Distance between the outermost spindles: 610 mm - Distance between spindles: 32 mm - Feed cylinder stroke: 60 mm - Max length of workpiece: 3400 mm - Horizontal spindle adjustment: up/down, front/back - Vertical spindle adjustment: right/left Lodpfx Ansx Rqkhjcsaa - Each drilling unit can operate independently - Right/left drill bits, threaded mounting (screw-in) - 3 pneumatic clamps - Motor power: 4×1.85 kW - Air requirement: 6-8 bar - Dimensions (L/W/H): 4600x1180x2200 mm - Weight: approx. 1500 kg Net price: PLN 12,900 Net price: EUR 3,070 depending on exchange rate, reference 4.2 EUR (Prices may vary depending on exchange rate fluctuations)

Condition: excellent (used), CATALOG NUMBER 7898 Technical data: - Inlet width: 310mm - Inlet height: 110mm - Shaft width: 330mm - Shaft diameter: 300mm - Knife length: 330mm - Number of knives: 2 pcs - Sieve dimensions: 30x30mm - Lower toothed feed roller - Lower roller motor: 0.55kW - Upper toothed feed roller - Upper roller motor: 0.55kW - Belt feeder - Belt feeder length: 1560mm - Belt feeder width: 300mm Lajdpfjymfktox Ancja - Main motor: 18.5kW - Auto-reverse (adjustable) - Overall dimensions (LxWxH): 2600x1440x2200mm - Weight: 1200kg ADVANTAGES – German-made – Auto reverse (with adjustable settings) – Used shredder, very good condition Net price: 35,900 PLN Net price: 8,550 EUR Net price calculated at exchange rate 4.2 PLN/EUR (In case of major exchange rate fluctuations, the price may change)

Condition: excellent (used), CATALOGUE NUMBER 7026 TECHNICAL DATA - Infeed width: 740mm - Infeed height: 300mm - Shaft width: 780mm Ledpeyk Hfaofx Ancsaa - Shaft diameter: 1000mm - Knife length: 780mm - Number of knives: 2 pcs - Screen dimensions: 55x55mm - Bottom: 4 toothed feed rollers - Lower shaft motor: 5.5kW - Top: 3 toothed feed rollers - Upper shaft motor: 5.5kW - Belt conveyor feeder - Length of belt feeder: 4300mm - Width of belt feeder: 600mm - Feeder belt drive motor: 2.2kW - Main motor: 90kW - Reverse - Autoreverse - Overall machine dimensions (L/W/H): 4600x2350x1700mm - Overall feeder dimensions (L/W/H): 4550x980x970mm - Total weight: approx. 11,000kg – German-made – Autoreverse (adjustable) – Used shredder, in very good condition Net price: 265,900 PLN Net price: 63,300 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of major currency fluctuations, the price may change)

Condition: excellent (used), Catalogue number 7374 TECHNICAL DATA - Upper feed hopper dimensions (L/W): 840x620 mm - Lower feed hopper dimensions (L/W): 300x300 mm - Rotor width: 340 mm - Motor: 22 kW - Screen: 15 mm - Number of knives: 6 pcs Ljdjy At Nqepfx Ancjaa - Discharge for shredded wood: Ø 160 mm - Dimensions (L/W/H): 1400x800x2000 mm - Weight: 840 kg ADVANTAGES – German-made – Very good condition – Used wood chipper Net price: 23,900 PLN Net price: 5,690 EUR based on an exchange rate of 4.2 EUR (Prices may vary significantly with currency fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 7130 TECHNICAL DATA - Maximum working width: 800mm - Maximum working thickness: 200mm Top section: - Pawls - Toothed feed roller Laedpjytdtaofx Ancsa - 3 rows of pressure rollers - Planing shaft 810mm, for 4 knives (2 blades fitted), approx. 7.5kW - Pressure - Smooth, metal feed roller Bottom section: - Adjustable infeed table with slip roller - Planing shaft 810mm, for 4 knives (2 blades fitted), 7.5kW - Smooth, metal slip roller - Electric table raising - Extraction nozzle diameter: 120mm - Dimensions (L/W/H): 1900x1450x1350mm - Weight approx. 2500kg – Czech manufacture – Very good condition – Used planer Net price: 33,500 PLN Net price: 7,970 EUR depending on EUR 4.2 rate (Prices may change with significant fluctuations)

Condition: excellent (used), Catalog number 6726 Lodsignt Uepfx Ancjaa TECHNICAL DATA - Loading hopper inlet 280x300 mm - Discharge outlet for chipped wood Ø 310 mm - Rotor working width 340 mm - Main motor 22 kW - Number of knives 6 pcs - Dimensions (L/W/H) 1300x1150x1680 mm - Weight 720 kg ADVANTAGES – very good condition – used wood chipper Net price: 19,900 PLN Net price: 4,740 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: used, functionality: fully functional, power: 58 kW (78.86 HP), fuel type: diesel, empty load weight: 5,700 kg, lifting height: 3,954 mm, Year of construction: 2008, operating hours: 3,591 h, total length: 5,600 mm, construction height: 2,570 mm, drive type: Diesel, load capacity: 1,600 kg, construction width: 1,570 mm, Yard loader Condition: Ready for use and fully functional Ledpfx Asy Dyr Uencjaa Technical condition: Good Front tires condition: 40 - 60% Rear tires condition: 40 - 60% Description: Yard loader - Hoftrac WEIDEMANN 3070 CX80 - - - Year of manufacture 2008 - - - 3,591 operating hours as per display - - - WITH NEW BUCKET - - - WITH NEW PALLET FORK - - - hydraulic quick coupler - - - 2-speed hydrostatic drive - - - operating weight 5,070 kg - - - permitted total weight 6,000 kg - - - overall height 2.57 m - - - width 1.57 m - - - length with bucket 5.60 m - - - total working height 3.95 m - - - max. bucket pivot point height 3.3 m - - - max. dumping height 2.40 m - - - 4-cylinder DEUTZ diesel engine TURBO 78 hp - - - lighting system - - - articulated steering - - - additional hydraulics up to fork carriage - - - good, wide tires approx. 50% - - - Weidemann to Euro attachment adapter can be removed - - - original paint - - - wheel loader in good condition!! Quick coupler, 3rd valve, 4th valve, rear work lights, front work lights, heating, full cabin,

Condition: excellent (used), Year of construction: 2008, Arburg 520S 1300-800 / machine in very good technical condition Year of manufacture: 2008 Ledpfx Ajy Dqvkjnceaa injection unit: screw diameter: 50 mm injection weight: 359 g Injection pressure: 2000 bar Metering volume: 392 ccm Clamping unit: clamping force: 130 t tie bar distance: 520x520 mm size of clamping platens: 695x695 mm ejector: hydraulic clamping unit: hydraulic Control system: SELOGICA - touch screen Additional equipment: Machine in very good technical condition Euromap 67 Euromap 12 Robot interface Air valve x 2 injection unit hardened - bimetal The machine was regularly serviced by the authorized service Arburg in Germany Dimensions: Weight: 6450 kg Length/width/height: 4.81x1.57x2.19 m Drive: Pumps/motor: 30 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2013, Engel Victory 330H/80V/160 combi Ecodrive / Production line with the Sepro SR S5-25 S3 Trans robot / Operating hours: approx. 18,000 h in automatic mode Year of construction: 2013 Injection unit: Screw diameter: 30 mm Injection weight: approx. 100 g Injection pressure: 2385 bar Dosing volume: 113 ccm Clamping unit: Clamping force: 160 t Distance between tie bars: 0x0 mm Size of the clamping plates: 750x750 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 200 - touch screen Additional equipment: 2K injection molding machine with rotary table and robot Tie-bar-less machine, hybrid: energy-saving, high-speed and very quiet Very good technical condition Operating hours: approx. 18,000 h in automatic mode Total number of operating hours: 24,312 h Euromap 67 Robot interface Air valve x 5 Hydraulic core pull x 5 Control unit with hot runners x 16 Reinforced injection units - bimetal Lsdpfsy Dqmcsx Anceaa Main motors - 2 x servo motor controlled with inverter Proportional valves on injection units - precise spraying Screw diameter in the vertical injection unit: ⌀22 mm - approx. 28 g/hp It is possible to purchase a turntable Robot Sepro SR S5-25 S3 Trans Year of construction: 2013 3-axis robot: 3 axes are driven by servomotors (electric): X, Y, Z (telescopic) Travel distances in axes approx.: X-2000, Y-1000, Z-1500 Automatic axis lubrication Touch control panel The safety package for robots Robot with adapter and protective housing Purchase of the robot for an additional charge Dimensions Weight: 8700 kg Length/width/height: 5.35x1.76x3.42 m All offered machines are started by our service technicians before sale. It is possible to obtain a video of technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, clamping force: 1,225 kN, controller model: CC100, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Clamping force: 125 t Horizontal cylinder: 35 Vertical cylinder: 18 MACHINE DETAILS Control: CC100 Lasdpfx Ansy Exc Iecsa EQUIPMENT 1x hydraulic core pull BAP 1x proportional hydraulic interface for index plate BAP 16x heating zones (HK) 2x magnetic clamping plates for BAP and FAP Note: When purchasing multiple items from the same location (see offers below), you will benefit from the lowest costs for dismantling and loading.

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, clamping force: 2,942 kN, screw diameter: 70 mm, displacement volume: 1,039 cm³, No minimum price – guaranteed sale to the highest bidder! Engel injection moulding machine including robot! TECHNICAL DETAILS Clamping force: 300 tons Laodpfx Aey Ew U Aencsa Screw diameter: 70 mm Max. shot volume: 1,039 cm³ EQUIPMENT 3x core pulls Robot Note: When purchasing multiple items from the same location (see offers below), the respective lower costs for dismantling and loading will be waived.

Condition: ready for operation (used), functionality: fully functional, fuel type: diesel, color: green, overall weight: 12,900 kg, maximum load weight: 3,800 kg, lifting height: 15,740 mm, Year of construction: 2007, operating hours: 6,100 h, machine/vehicle number: Roto 38.16, Equipment: UVV, all wheel drive, hydraulics, pallet forks, Rotating Telehandler Technical Specifications Working height: 15.74 m Lateral reach: 12.98 m Slew range: 415° Length: 6.24 m Width: 2.24 m Clearance height: 2.85 m Lifting capacity: 3,800 kg Platform capacity: 300 kg Total weight: 12,900 kg Stabilizers: angled outriggers Drive: diesel Accessories: Forks Remote control only available for platform function Driver’s license class: 3/B Inspections / Status Safety inspection (UVV) valid until 11/2025 Operating hours: 6,100 h as of 02/2024 Interested? We are happy to assist you at any time. You can reach us from Monday to Friday between 7:00 a.m. and 4:00 p.m. Lasdpfx Aetucp Tencoa Price stated plus VAT at the legal rate. Subject to change and errors!

Condition: used, Year of construction: 2017, operating hours: 2,900 h, * Hyundai HX330 NL tracked excavator Lodpfx Asy Eu Akjncsaa * Year of manufacture: 2017 * 2,900 operating hours * 33,300 kg * 202 kW Cummins engine, 6 cylinders * Oilquick OQ80 fully hydraulic quick coupler * Central lubrication system * Hydraulic digging bucket * Camera * Automatic climate control * 3 m undercarriage width

Condition: used, Schulz roller conveyor 90°-580-530 IR795 RA1244 Technical data: Manufacturer: Schulz Angle: 90° Useful width (NUB): 530 mm Nominal/outside width (NB): 580 mm Inner radius (IR): 795 mm Drive: centered Conveyor speed: v = 0.30 m/s Rollers: Type: G6/50 plain bearing with conical plastic molded part Transport weight: 85 kg Scope of delivery: without supports and side guides (please enquire if required) optional Price plus VAT ex central warehouse Dr. Sonntag KG 97076 Würzburg Laedpfjk Aa N Rjx Ancsa Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Year of construction: 2016, condition: used, Transnorm roller conveyor ejector GF 4510-1120-1000 RA1854 Make: Transnorm Roller width (RB): 1030 mm, Steel rolls Nominal/outer width (NB): 1050 mm Rolls diameter: 50 mm length: 3715mm Overall height frame: 250 ejector angle: 30° in both sides 7 rows ejector individually controllable Motor MOVI-Mot 300-500V 1,75kW Conveyor speed: freely adjustable with frequency converter Scope of delivery: with supports (please enquire if required) Prices net plus VAT. ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Ledpek Abhhjfx Ancjaa Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 1996, Transnorm Belt conveyor 1880-400-300 RA1391 Manufacturer: Transnorm Lasdpfx Anek Abgcocsa Type: TS 1200 belt conveyor Year of manufacture: 1996 Condition: good (used) Motor: fully functional conveyor length (FL): 1880 mm nominal / external width (NB): 400 mm belt width (GB): 300 mm Motor type: SEW gear motor Motor power: kW 0.37 220-240V Conveyor speed: 1.05m/s, adjustable conveying speed with frequency converter also possible at extra cost Drive: head drive Delivery: without supports (if needed please ask) Optional: supports Price plus VAT central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg For individual, professional advice, simply get in touch with us. Simply contact us by phone or by mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team of Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Transnorm inclined roller conveyor 3130-1180-840 RA1865 Make: Transnorm Roller width (RB): 840 mm Nominal/outer width (NB): 1180 mm Length: 3130mm Diameter rollers: 50 mm Lsdpfx Anek Abiiscoaa Distance between rollers: 55 mm Roller conveyor motor: SEW drive motor frame height: 210 410 mm side guide with 200mm belt conveyor included Optionally available: Supports frequency converter for freely adjustable Conveyor speed Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, Gattingerstraße 11 B & C, 97076 Würzburg, Germany For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2015, Lippert rising falling Incline belt conveyor GF 800+6450+12630-750-600 RA2128 Technical data: Conveyor length (NL): 19880 mm ( 800 mm forward run 6540 mm ascending belt + 12630 mm top bend ) frame width (NB): 750 mm, 800 mm with motor belt width (GuB): 600 mm Overall height (BH): 105 mm, 430 mm with motor Angle: 15° Supporting feet: optionally available Conveying speed (v m/s): contact us Drive: SEW gear motor, R37 DRE80M4/TH Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. Lsdpfxjrudbus Anceaa We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2015, Lippert rising falling Incline belt conveyor GF 800+10500+2730-750-600 RA2132 Ljdpfxorudbxj Ancsaa Technical data: Conveyor length (NL): 14030 mm ( 800 mm forward run + 10500 mm ascending belt + 2730 mm top bend ) frame width (NB): 750 mm, 800 mm with motor belt width (GuB): 600 mm Overall height (BH): 105 mm, 430 mm with motor Angle: 15° Supporting feet: optionally available Conveying speed (v m/s): contact us Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Lippert rising falling Incline belt conveyor GF 3050+800-750-600 RA2258 Technical data: Conveyor length (NL): 3850 mm ( 3050 mm + 800 mm ) frame width (NB): 750 mm, 800 mm with motor belt width (GuB): 600 mm Overall height (BH): 105 mm, 430 mm with motor Angle: 15° Supporting feet: optionally available Conveying speed (v m/s): contact us Drive: SEW gear motor, R17 DR63LA/TH/Z Electrical data: 50Hz V380-500, kW 0,25 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Laedpfx Asrrxc Sencoa Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics