Used Connectors for sale (1,529)

Condition: used, empty load weight: 5,620 kg, axle configuration: 3 axles, first registration: 07/2007, next inspection (TÜV): 07/2027, tire size: 385/55 R22.5-385/55 R22.5, Year of construction: 2007, Ref: 55741 Chodoz Euzuepfx Afgsc Equipment: * Air connection: Red/Yellow connector * Electrical connection: 1 x 15-pin + 2 x 7-pin * ABS * EBS * Side impact protection * Lift axle: 1 VIN: WMP3SCA397CML1345 Tire size: 385/55 R22.5 Width: 2.45m Height: 1.34m

Condition: good (used), Year of construction: 2004, more pieces industrial gas burners Oilon GP-80 H + double GasMultiBloc Dungs MB ZRDLE 420 B01 S20 +Dungs FRS 520 OILON GP-80 H Capacity: 350-1000KW established in 2005 Voltage: 230 / 400V 50HZ 2KW ip20 The controller LFL1.322 GAS drueck: min 20mbar / max 360mbar 62 kg Monoblock burner cast aluminum Electronic control panel is a signal diagram showing the different stages of combustion and alarms, allows you to keep constantly under control in the proper burner operation Flame type QRA2 Csdpfxocvkale Afgohc Software relay LFL1.322 Gas train with an appropriate adapter is set on the side of the burner Adjustable burner flange Damper actuators Connect quick connector for the power cord Automatic termination of the air when the burner is switched off Seat and gas safety valves The reduction of the gas pressure regulator The differential air pressure switch Controller minimum gas pressure Luc overall control.

Condition: used, functionality: fully functional, power: 49.28 kW (67.00 HP), first registration: 10/2013, fuel type: diesel, color: orange, driver cabin: day cab, gearing type: automatic, Year of construction: 2013, operating hours: 1,223 h, Equipment: additional headlights, air conditioning, all wheel drive, car registration, cruise control, differential lock, hydraulics, navigation system, trailer coupling, Drive 4-cylinder, 4-stroke Kubota diesel engine, Type 2607, 49.2 kW / 67 hp in the C 270 Hydrostatic all-wheel drive via four wheels of equal size, Stepless speed selection with a total of four preselectable driving ranges Hydraulic wheel load compensation (combined independently and dependently) Mechanical differential lock, front and rear, simultaneously switchable electrohydraulically Hydraulic service brake and electric parking brake as a drum brake Suspended front and rear axles Cab including heater High roof Heat-shielding glazing and side sliding windows Multifunction display (tachometer, operating hour counter, speed indicator, remote thermometer for engine and hydraulic oil, fuel level indicator) Mechanically adjustable steering column 3 storage compartments, sun protection film, interior cab light with door contact switch Hydraulics Multifunction arm console with driving program and differential lock switch Hydrostatic articulated steering with 2 double-acting steering cylinders Other equipment Subframe for tool-free change of platforms and equipment Locking rail in the front for adjusting the upper link Electrical system: AC generator 12 V / 90 A – 1080 W Battery 12 V / 88 Ah Battery disconnect switch Radio preparation: wiring harness, antenna, loudspeaker grilles Lighting system according to StVZO (German Road Traffic Licensing Regulations) 7-pin socket at the rear Path signal prepared via Super-Seal plug connector Biodegradable hydraulic oil Stainless steel support pad Standard paint finish: orange RAL 2004 and gray RAL 7021 Front linkage Front linkage incl. pull-in hook CAT II / CAT I with passive tilt adjustment Rotating beacon Locking block Mechanical PTO shaft, front 1000 rpm in front Hydraulic flow divider 1 Flow divider, circuit 1 adjustable from 0–25 l/min with line set to front and rear Return flow front and rear Hydr. kit, implement adjustment pump Implement adjustment pump 0–80 l/min, variable Line set to front and rear Return flow front and rear Leakage oil line front and rear Hydraulic tilting mechanism for superstructure arms Hydraulic set 2 3 double-acting control valves Cjdpjzdizvjfx Afgohc 2 with floating position 6 quick-release couplings 2 quick-release couplings at the rear, angled connected via a T-piece with quick-release couplings at the front Active hydraulic tilt adjustment 1 multifunction joystick for 5 double-acting functions including direction control switch and speed regulator Electro-hydraulic implement relief Conversion kit, wider fenders Comfort package Driver's seat with air suspension, armrest, air conditioning Hydr. tilting mechanism for cab Winter package = Mirror and windshield heating, engine preheater 2 work lights in the front 2 work lights in the rear Ball hitch, permanently mounted The following options are available at an extra charge: 1. PRICE INCREASE PLATFORM DEMO UNIT Platform 1250 x 1060 x 300 mm (can be retrofitted at any time) – currently installed € 2,750,- plus VAT 2. PRICE INCREASE TOWING HITCH, NON-AUTOMATIC HEIGHT ADJUSTABLE - DEMO UNIT € 470,- plus VAT Subject to changes, typing errors, errors and prior sale. All information is provided without guarantee. The sale is made with the exclusion of any warranty.

Condition: repair required (used), functionality: limited functionality, power: 49 kW (66.62 HP), first registration: 07/2011, fuel type: diesel, color: orange, fuel: diesel, Year of construction: 2011, Equipment: air conditioning, all wheel drive, car registration, cruise control, differential lock, hydraulics, Holder C 270 Drive System 4-cylinder, 4-stroke Kubota diesel engine, Type 2607, 49.2 kW / 67 hp in the C 270 Hydrostatic all-wheel drive via four equal-sized wheels Infinitely variable speed selection with a total of four pre-selectable gear stages Hydraulic wheel load compensation (combined independently and dependently) Mechanical differential lock, front and rear, simultaneously switchable electrohydraulically Hydraulic service brake and electric parking brake as a drum brake Suspended front and rear axles Cab including heater Heat-protective glazing and sliding side windows Multi-function display (tachometer, operating hour meter, speed indicator, remote thermometer for engine and hydraulic oil, fuel level indicator) Mechanically adjustable steering column 3 storage compartments, sunshade film, interior cab light with door contact switch Hydraulics Multi-function arm console with driving program and differential lock switch Hydrostatic articulated steering with 2 double-acting steering cylinders Additional Equipment Mounting frame for tool-free changing of platforms and attachments Locking rail at the front for adjusting the top link Electrical system: AC generator 12 V / 90 A – 1080 W Battery 12 V / 88 Ah Battery disconnect switch Radio preparation: wiring harness, antenna, speaker grilles Lighting system according to StVZO (German Road Traffic Licensing Regulations) 7-pin socket at the rear Path signal prepared via Super-Seal plug connector Biodegradable hydraulic oil Stainless steel support pad Standard paint color: Orange RAL 2004 Front linkage Front linkage incl. safety hook CAT IN / CAT I with passive tilt adjustment Rotating beacon Locking block Mechanical PTO shaft, front 1000 rpm at the front Hydraulic flow divider 1 Flow divider, 1st circuit adjustable from 0–25 l/min with line set to the front and rear Return line at the front and rear Hydraulic kit, attachment adjustment pump Cedpfezfbu Rox Afgshc Attachment adjustment pump 0–80 l/min, variable Line set to the front and rear Return line at the front and rear Leakage oil line at the front and rear Hydraulic tilting device for superstructure arms Hydraulic set 2 3 double-acting control valves 2 with floating position 4 quick-release couplings 2 quick-release couplings at the rear, angled connected via a T-piece with quick-release couplings at the front Active hydraulic tilt adjustment 1 joystick incl. direction of travel switch and speed control Electro-hydraulic attachment relief Comfort package Driver's seat with air suspension, armrest 2 work lights at the front 2 work lights at the rear WITH THE FOLLOWING DAMAGES: - Articulated joint worn out - Age-related and usage-related wear on the vehicle - Rust damage corresponding to the age Changes, typing errors, mistakes and prior sale are subject to change. All information is provided without guarantee. The sale is made with the exclusion of any warranty or guarantee.

Condition: new, functionality: fully functional, New unit Enmair Electropneumatic core puller ER Immediately available from stock ER series, Type 650 Application range from 5 to up to 150 to (depending on the design) – injection molding machine Horizontal travel: 650 mm Vertical travel: 125 mm Swivel angle: 5 degrees Csdjr A D Itspfx Afgohc Gripper angle: [value missing in original text] Lifting weight: approx. 3 kg A bracket on the rear allows for easy adjustment of the swivel angle to the right or left, as needed. Required operating air pressure: 5 - 7 bar 220 V, 50 Hz Depending on the pre-existing equipment on the injection molding machine, the unit can be offered with an Euromap 12 or Euromap 67 connector. Operating interface: English, Dutch

Condition: used, empty load weight: 6,048 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 06/2024, loading space length: 9,807 mm, loading space width: 2,440 mm, loading space height: 2,200 mm, loading space volume: 52 m³, suspension: air, tire size: 385/65 R22,5, color: white, Year of construction: 2024, mileage: 207,154 km, Equipment: ABS, Unladen weight: 6048 kg, permissible total weight: 36000 kg, loading space (L W H): 9807 mm x 2440 mm x 2200 mm, tire size: 385/65 R22.5, loading space volume: 52 m³, 1st axle: , 2nd axle: , 3rd axle: , air suspension, folding underrun protection, front lift axle, electronic braking system EBS, brake wear indicator, pendulum flap (surface-mounted), grain pusher, roof roll-up tarpaulin, platform, 1x15 and 2x7-pin connectors, anti-spray, light alloy rims, You can find our entire vehicle range at . Need financing? With our Value Added Service, we offer you individual financing options, full service, and telematics services. We would be happy to advise you. Codoz Ecb Njpfx Afgjhc

Condition: used, mileage: 123,363 km, power: 205 kW (278.72 HP), first registration: 05/2024, fuel type: diesel, overall weight: 15,990 kg, axle configuration: 4x2, wheelbase: 5,175 mm, color: other, driver cabin: other, gearing type: automatic, suspension: steel-air, Equipment: ABS, air conditioning, cruise control, low noise, traction control, trailer coupling, Maximum permissible total weight: 15,990 kg, Fabric seats, Air suspension, Low noise level: ECE 92/97, Electronic Stability Program (ESP), Anti-slip regulation (ASR), Comfortable driver's seat, Air-suspended driver's seat, Passenger bench for 2 people, Digital radio receiver (DAB), Multifunction display, Bluetooth audio streaming, Bluetooth mobile phone preparation, Lane departure warning, Electric windows, Electrically adjustable and heated mirrors, Immobilizer, Central locking with remote control, Anti-theft bar: Front, Twin tires, Spare wheel, LED daytime running lights, 1x15-pin socket, Speed limiter: 90 km/h, Voltage converter, Automatic Emergency Braking System (AEBS), Splash guard, FMS data interface, R/S 15-pole connector, D120KN crossbeam, Towing hitch adjustment, 24/12V-10.5A converter, Clothes rail, FMS data interface, R/S 15-pole connector, D120KN crossbeam, Towing hitch adjustment, 24/12V-10.5A converter, Clothes rail, INDUSTRIAL VEHICLES Iveco Eurocargo 140E28 / Alloy box van COLOR: WHITE YEAR: 2024-05 KM: 123,363 GVWR: 15,990 DISPLACEMENT: 6.728 Euro 6 FUEL: DIESEL Csdpfxoz D Ngvs Afgjhc

Condition: new, empty load weight: 5,620 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 7,450 mm, loading space width: 2,340 mm, loading space height: 1,500 mm, loading space volume: 25 m³, suspension: air, tire size: 385/65 R22,5, color: grey, Year of construction: 2025, Equipment: ABS, Unladen weight: 5,620 kg, permissible total weight: 36,000 kg, cargo space (L x W x H): 7,450 mm x 2,340 mm x 1,500 mm. Tire size: 385/65 R22.5, cargo volume: 25 m³, 1st axle: , 2nd axle: , 3rd axle: , air suspension, foldable underrun protection, front lift axle, electronic braking system (EBS), pendulum tailgate (overlapping), sliding roof, 1x15- and 2x7-pin connector sockets, anti-spray system, alloy wheels. View our complete vehicle inventory on our website. Interested in financing? With our Value Added Service, we offer tailored financing options, full-service, and telematics solutions. We are happy to advise you. Chjdpfx Afeyi Id Uegsc

Condition: new, empty load weight: 5,395 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 7,450 mm, loading space width: 2,340 mm, loading space height: 1,500 mm, loading space volume: 25 m³, suspension: air, tire size: 385/65 R22,5, color: grey, Year of construction: 2025, Equipment: ABS, Unladen weight: 5,395 kg, permissible total weight: 36,000 kg, loading area (L x W x H): 7,450 mm x 2,340 mm x 1,500 mm. Tire size: 385/65 R22.5, loading volume: 25 m³, 1st axle: , 2nd axle: , 3rd axle: , air suspension, foldable underrun protection, front lift axle, electronic braking system (EBS), pendulum tailgate (resting), roll-up roof tarp, platform, connectors: 1x15 and 2x7-pin, anti-spray, light alloy rims, tire pressure monitoring system. You can find our entire vehicle range online. Interested in financing? With our Value Added Service, we offer you customized financing options, full service and telematics solutions. We are happy to advise you. Chodpfxey Ngxxo Afgsc

Condition: used, mileage: 148,637 km, power: 368 kW (500.34 HP), first registration: 04/2025, fuel type: diesel, empty load weight: 8,322 kg, maximum load weight: 11,778 kg, overall weight: 20,100 kg, axle configuration: 4x2, wheelbase: 3,750 mm, color: red, driver cabin: other, gearing type: automatic, emission class: euro6, suspension: air, number of seats: 2, Equipment: ABS, air conditioning, cruise control, navigation system, parking heater, Color: Red, Unladen weight: 8322 kg, Gross vehicle weight: 20100 kg, Front axle: 385/55 R22.5, Rear axle: 315/70 R22.5, Seats: Leather, Air suspension, Retarder, Digital tachograph, Fifth wheel coupling: JSK 42KZ, -560 mm, EBS - Electronic Braking System, ESP - Electronic Stability Program, Automatic air conditioning, Auxiliary heater, Adaptive Cruise Control (ACC), Parking heater with automatic preselection, Driver's seat heating, LED headlights, Headlight cleaning system, Automatic lights, Headlight leveling, Radio, Bluetooth audio streaming, Rain sensor, Multifunctional leather steering wheel, Mechanically adjustable steering column, Lumbar support, Alloy wheels, Electric windows 2x, Roof spoiler, Fog lights, Electric and heated exterior mirrors, Electric curb mirror, Wide-angle mirror, Tire pressure monitoring system, Central locking with remote control, Windshield, Refrigerator, Axle load indicator, Hill Hold Control (HHC), LED daytime running lights, Connector 1x15 pin, Ferry function, Telematic system, Driver's seat air conditioning, Side skirts, Cab suspension, Microwave, Coffee machine, Smart tachograph 2 Csdpfx Afjz Elkaegjhc

Condition: new, functionality: fully functional, machine/vehicle number: NEW-14, empty load weight: 814 kg, maximum load weight: 1,886 kg, overall weight: 2,700 kg, axle configuration: 2 axles, loading space length: 3,060 mm, loading space width: 1,700 mm, loading space height: 300 mm, suspension: other, tire size: 195 / 50 R 13, color: silver, trailer brake: trailer braked, Year of construction: 2026, brakes: other, SARIS K3 306 170 2700 2 3-way tipper + enclosed leaf guard 60cm NEW VEHICLE Internal dimensions: 306cm x 170cm Side board height: 30cm Loading area height: 66cm Total weight: 2700kg Payload: 1886kg braked tandem trailer overrun brake and parking brake from KNOTT 2x 1350kg axle with brake low chassis fully welded, hot-dip galvanized steel frame aluminum profile side boards with tension lock can be folded down and removed on all sides enclosed leaf guard 60cm made of hot-dip galvanized steel can also be opened and removed on all four sides 15mm thick, non-slip and robust screen-printed wood floor additional steel plate on wood floor automatic support wheel with 400kg support load 6 noise-reducing lashing eyes with 800kg tensile force reinforced 13" C tires with steel valve M+S tires net/rope hook on the frame 13-pin connector LED marker lights at the front lights at the rear with reversing light and triangular reflectors upper frame mounted on rubber large tipping angle of 51 degrees to the rear hand pump with adjustable handle OPTIONAL ACCESSORIES PERMANENTLY REDUCED IN PRICE FROM FEBRUARY 2026 -Equipment for 100km/h (shock absorbers) -Spare wheel with holder -without side boards (price reduction) -Side board height increased to 35cm -Black Edition (powder-coated side boards and rims in black) -integrated loading ramps 2800kg -electric tipping control -charger -remote control -Bluetooth remote control -emergency hand pump in combination with electric control -safety support for maintenance work on the tipped vehicle -foldable crank for rear supports -complete LED lighting -theft protection Csdpfx Ajz Egkhofgohc -net with fine or coarse mesh -H-frame -leaf guard in various heights, also closed -additional side boards 30cm with tension lock -flat cover with or without railing -high cover 160cm or 180cm further accessories on request! plus. freight to Gera and vehicle registration document €250 net Images are for illustrative purposes only and may show optional accessories at an extra charge. Haven't found the right trailer yet? We have 50-100 vehicles permanently in stock and ready for immediate pick-up. The workshop is open on weekdays from 8:00 am to 5:00 pm for all types of repairs. Specialist in axle repair, also for caravan trailers. Large selection of rental trailers. In addition, we have a large selection of spare parts and accessories for trailers of all manufacturers. Get advice by phone, visit our website or come by directly.

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, measuring range X-axis: 1,100 mm, measuring range Y-axis: 1,100 mm, measuring range Z-axis: 750 mm, table load: 2,000 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Measuring range, X-axis: 1,100 mm Measuring range, Y-axis: 1,100 mm Measuring range, Z-axis: 750 mm Travel length, X-axis: 1,100 mm Travel length, Y-axis: 1,100 mm Travel length, Z-axis: 750 mm Max. traverse speed: 350 mm/min Table length: 2,050 mm Table width: 1,100 mm Max. workpiece weight: 2,000 kg Table load: 2,000 kg Distance between columns: 1,100 mm MACHINE DETAILS Input current type: Alternating current (AC) Input voltage: 400 V Compressed air connection: 6 bar Operating pressure: 6 bar Operating temperature: 22 °C Ambient temperature: 16–30 °C Dimensions & Weight Dimensions (L x W x H): 2,050 x 1,890 x 2,700 mm Total weight: 2,800 kg Year of last overhaul: 2013 EQUIPMENT Virtual DMIS Software V7.0 OnMotion Upgrade Kit with Servo Tower, Joystick Box, and interface cables PC with OnMotion hardware and Virtual DMIS V7.0 5 used TP20 measuring probes Documentation / Manual Nameplate Note: Due to age, the cables between the machine and the controller are stiff and brittle. Disconnecting and transporting them may result in the need to replace individual connection cables or connectors. However, this can be done easily with some knowledge. Csdpfx Aozy Ezdofgjhc

Condition: used, empty load weight: 8,790 kg, maximum load weight: 30,210 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 03/2022, loading space length: 13,410 mm, loading space width: 2,490 mm, loading space height: 2,650 mm, loading space volume: 88 m³, suspension: air, color: white, Year of construction: 2022, Equipment: ABS, Unladen weight: 8790 kg, permissible total weight: 39000 kg, cargo space (L W H): 13,410 mm x 2,490 mm x 2,650 mm, cargo space volume: 88 m³, air suspension, underrun protection, lift axle, pallet box, electronic braking system (EBS), toolbox, temperature recorder, double-deck EURO pallet with beams, connector plug 1x15 and 2x7-pin, anti-spray, telematics system: + door sensor, dynamic ramp protection (DRP). You can find our entire vehicle range at [website address]. Would you like financing? With our value-added services, we offer you individual financing options, full-service, and telematics services. We will be happy to advise you. Chjdpfx Ajz Ed Uksfgjc

Condition: new, empty load weight: 345 kg, maximum load weight: 1,155 kg, overall weight: 1,500 kg, axle configuration: 1 axle, permissible axle load (axle 1): 1,500 kg, loading space length: 3,050 mm, loading space width: 1,940 mm, total length: 4,460 mm, total width: 2,050 mm, suspension: other, tire size: 195/55 R10C, maximum speed: 80 km/h, trailer brake: trailer braked, Year of construction: 2026, Single-axle 1500 kg transport trailer, platform trailer Type QUAD-2 3020 by Temared for the transport of 1-2 ATVs and motorcycles Brand new trailer, 2 years manufacturer's warranty 2 years of initial vehicle inspection upon first registration Registration documents (COC certificate and vehicle registration document) Equipment: - welded, galvanized frame - galvanized V-shaped drawbar - platform closed with screen-printed plywood, 15 mm - fixed front railing, screwed on - side railing, plug-in, removable for side loading - 2 steel ramps, 1500 x 400 mm - 4 lashing eyes recessed in the floor - 4 pairs of lashing eyes screwed onto the outer frame - automatic jockey wheel - rubber suspension axle KNOTT - overrun brake with reverse assist, handbrake - tires 195/55 R10C on steel rims - plastic mudguards, 1/4 shell Chedpfsx Uq Etjx Afgsc - 12V lighting system, 13-pin connector - multi-function lights - front position lights - 2 license plate lights - 2 wheel chocks Technical data: Permissible total weight: 1500 kg Unladen weight: 345 kg Payload: up to 1155 kg Nose load: 100 kg Overall length: 4460 mm Overall width: 2050 mm Platform surface area: 3050 x 1940 mm Platform height: 580 mm Optionally available on request: Wheel shock absorbers for 100 km/h approval + EUR 125.00 Wheel stoppers for motorcycles + EUR 80.00 Box lock, theft protection + EUR 30.00 Offer price including 19% VAT. Trailer available on request. Financing available upon request. Delivery possible for an additional charge. Other motorcycle trailers in stock. Come by or write to us. Inspection Mon-Fri 09:00 - 17:00, Saturdays 09:00 – 12:00. Offers and further information on request: Office Tel. +49 (0) 2254/83718-20 Subject to technical changes, printing errors, errors and prior sale. Pictures show partly optional accessories. *Please note the legal regulations regarding weight and speed limits.

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 50 h, functionality: fully functional, clamping force: 1,200 kN, screw diameter: 30 mm, clearance between the columns: 480 mm, displacement volume: 247 cm³, injection pressure: 272 bar, injection weight: 107 g, mold height (min.): 150 mm, ejector force: 40 N, ejector stroke: 100 mm, plate width: 705 mm, plate height: 705 mm, total length: 5,037 mm, total width: 1,590 mm, total height: 1,850 mm, overall weight: 5,400 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, input current: 62 A, warranty duration: 12 months, Equipment: documentation/manual, Base machine: FF120 IU320 D=30 Fully electric IMM. Ejector, nozzle system, core pulls servo-hydraulically controlled. Clamping force 120T Tie bar spacing 480x480 Tool installation height 150 to 580 Robot interfaces Euromap 18 and Euromap 67 Warranty can be optionally extended to 24 or 36 months. Suitable 12 kg linear robot available upon request. Optional equipment: CE Maximum tool height increased to 580 mm Bimetallic plasticizing up to GF 30% Interface for conveyor belt Electric quick-change system for the cylinder with Harting interface 2 additional hydraulic core pulls with limit switches 2 air blow devices, permanently mounted on the stationary platen Dosing signal interface with HAN-3A connector Additional power supply: 220 V, 10 A, Schuko socket 20-mA interface for mold temperature controller One water distributor 4 × 2 on the rear of each platen with 3/8" connections 2 water distributor batteries with 4 lines each Socket package: 3 × 220 V / 16 A Schuko sockets 2 × 400 V / 16 A CEE sockets 1 × 400 V / 32 A CEE socket 3 freely programmable input/output signals Centering rings on both platens according to Euromap 18 / 67 Standard equipment: Clamping unit · Clamping unit with automatic central lubrication · Clamping movements via proportional valve control · Hydraulically operated ejector plate · Tool protection · Variable adjustment of the clamping force possible · Ejector protection · Mechanical robot interface Euromap 18 · Footboard protection under the clamping unit from D1 1100 and larger · Precision leveling shims between machine frame and customer floor · Platens with threaded holes and T-slots, see technical data · Automatic central lubrication (with grease) · Ejector plate Injection unit · Hydraulic dual-cylinder injection · Thermally insulated plasticizing unit Cjdpfxszzn Hls Afgjhc · 10-stage adjustment of the injection speed · (Control parameters: speed; pressure; position) · 10-stage adjustment of the holding force (Control parameters: speed; pressure; position) · 5-stage adjustment of the plasticizing speed · (Control parameters: speed; pressure; position) · Plasticization supported on linear guides · Hydraulic nozzle system · Cold start protection · Screw retraction function · Automatic shut-off · Measuring system for screw position Electrical system · Plasticizing heater via PID control · Manual, semi-automatic and fully automatic operation possible · Maintenance interface · Automatic alarm system with horn · Unlimited technical parameter memory · Automatic tool height adjustment · Emergency stop function · Online cycle analysis · 12" TFT touch operating panel · Visualized graphic program · PDP interface · Injection monitoring · Tool closing monitoring · SPC interface · IP54 standard · Screw speed measurement · 16-level password security · Euromap 12 · Automatic overheating protection Hydraulic system · Quiet servomotor hydraulic system · Energy-saving servomotor hydraulic system · High-performance servopump system · Back pressure control via proportional valves · Oil preheating · Injection and tool closing monitoring · Automatic pressure and flow calibration · Oil temperature and oil level alarm

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 200 h, functionality: fully functional, clamping force: 1,600 kN, screw diameter: 48 mm, clearance between the columns: 460 mm, displacement volume: 371 cm³, injection pressure: 1,630 bar, injection weight: 341 g, mold height (min.): 160 mm, ejector force: 42 N, ejector stroke: 140 mm, plate width: 690 mm, plate height: 690 mm, total length: 5,200 mm, total width: 1,250 mm, total height: 1,800 mm, overall weight: 5,000 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, input current: 114 A, warranty duration: 12 months, Equipment: documentation/manual, Base machine: UN160A5-IU604 D=48 Clamping force: 160T Tie bar spacing: 460x460 Tool installation height: 160 to 520 Robot interfaces: Euromap 67, Euromap 18 Basic standard equipment Suitable 12 kg linear robot available upon request. Optional equipment: CE standard Quick-change version of the plasticizing unit with Harting interface 1 set of core pull Csdpfx Aezz Spdofgshc Dosing signal interface with HAN-3A connector KEBA 1000 1 set with 6 glass flow meters EU67

Condition: new, maximum load weight: 746 kg, overall weight: 1,300 kg, axle configuration: 1 axle, loading space length: 2,515 mm, loading space width: 1,330 mm, loading space height: 1,685 mm, total length: 3,920 mm, total width: 1,845 mm, total height: 2,300 mm, Year of construction: 2026, Refrigerated trailer - HK 132614-18 PF30 Price - €7,200 including 19% VAT, 6.4% delivery fee, and vehicle documents, as well as adapter cable, 2.5 m, for the refrigeration unit, and 2 sliding supports! Keeps your goods at a temperature between +5°C and +10°C. Suitable for: * Beverages * Cut flowers Description: The single-axle sandwich box for the refrigerated transport of your goods. The frame and chassis are made of hot-dip galvanized steel, giving the sandwich box a long service life. The floor of the sandwich box consists of special wood that is glued together with multiple layers of waterproof adhesive and has a non-slip phenolic resin coating. The body of this box consists of 30 mm thick sandwich panels with a core of foamed polyurethane and a double-sided facing of galvanized and polyester powder-coated steel sheet. The edges of the sandwich box are made of anodized aluminum, as is the torsion-resistant rear portal and the rain gutter at the rear. The door hinges, the lockable rotating bolt lock, and the door latch are made of stainless steel. Seals made of plastic are mounted on the doors, which enable the watertight transport of your goods. The single-axle sandwich box from Humbaur is an indispensable aid for the safe, refrigerated transport of goods. Technical data: * Trailer type - Single-axle * Construction type - Sandwich * Weight - 554 kg * Gross vehicle weight - 1,300 kg * Payload - 746 kg * Internal length - 2,515 mm * Overall length - 3,920 m * Internal width - 1,330 mm * Overall width - 1,845 mm * Internal height - 1,685 mm * Overall height - 2,300 mm * Loading height - 535 mm * Tire size - 14 inches Standard equipment: V-shaped drawbar, hot-dip galvanized * 13-pin connector * 15 mm thick floor panel Codpfx Afjz Accwegehc * Sandwich body made of PurFerro, 30 mm thick * Single-leaf door at the rear * Rotating bolt lock and hinges made of stainless steel * Support wheel * Refrigeration unit

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Tilting function Features: - Tilting loading platform - 8 tie-down points - Universally applicable, sideboards can be retrofitted Net price: €2,092.44 / Gross price: €2,490.00 Article number: MUL115331800.01 Technical data: • Brand: Martz • Model: UNILADER 330 C • Vehicle type: Car transporter • Vehicle condition: New • First registration: Without first registration • TÜV/HU (technical inspection): 2 years from first registration • Internal dimensions (L x W x H): 330 x 184 x 0 cm • External dimensions (L x W x H): 490 x 245 x 87 cm • Permissible total weight: 1,500 kg • Unladen weight: 340 kg • Payload: 1,160 kg • Chassis: Low-loader (wheels next to the body) • Tires: 185R14C • Suspension: KNOTT rubber spring axle • Support wheel: Yes • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Screen-printed wood floor, slip-resistant and waterproof • Option to insert at all 4 corners for grating attachment, sideboard attachment, or front wall extension • Sturdy eccentric locking mechanisms for securing the loading platform • Very low chassis for a shallow loading angle • Tilting loading platform, with gas springs • Optional retrofitting of higher sideboards and a rear ramp • Very stable steel frame • 8 tie-down points recessed in the side frame profile • Reverse assist system • KNOTT overrun device and parking brake • Very stable, bolted V-drawbar • 13-pin connector • Reversing light • Large-sized safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Support wheel _____ Accessories can be retrofitted by our specialist workshop!! - Please feel free to inquire about specific requests! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance, or transfer plates (Germany) can be provided. - Export license plates including customs declaration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! Codpfxex Tcfpo Afgjhc We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years - Errors, omissions and prior sale excepted -

Condition: excellent (used), For sale: 64 original SSI Schäfer pallet racking beams in good used condition. These beams are suitable for extending or modifying an existing SSI Schäfer pallet racking system. Their extended length of 3,800 mm makes them suitable for wide storage bays in warehouses, production facilities, and logistics centers. Technical details: Manufacturer: SSI Schäfer Quantity: 64 beams / 32 pairs Beam length: 3,800 mm Beam profile: approximately 100 × 50 mm Connection: 5-hook end connectors Color: blue Condition: used, in good working condition Approximate load capacity: up to approximately 2,000 kg per beam pair with an evenly distributed load. The final permissible load capacity depends on the uprights, rack configuration, installation method, and overall condition of the complete racking system. Compatibility with the existing rack uprights must be checked by the buyer before installation. Chedpfx Asz Dw Twofgoc Price for the complete lot of 64 beams: EUR 1856 excluding VAT. Price per beam: EUR 29 excluding VAT. Partial quantities can also be purchased. The equipment can be inspected by appointment in Latvia. Loading assistance for the buyer’s vehicle is available. For eligible EU VAT-registered companies, an intra-Community supply without Lat

Condition: new, Available from stock in various versions! Suitable, for example, for machines from Emmegi, Elumatec, Pressta-Eisele, Mecal, Fom, etc. For installation on aluminium circular saws, ideally suited for double mitre saws and automatic sawing systems. Power output 2.2 or 3.0 kW, with or without remote start feature. 160 litre removable container. 2 extraction ports. Mobile, with 2 lockable rollers. Hoses, connectors, and reducers available to suit your requirements. Chedpfx Ajwczfaefgec

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, rotary table diameter: 450 mm, position of the milling head: Schwenkbar (45°), table diameter: 450 mm, total length: 5,600 mm, gear diameter: 500 mm, total height: 3,100 mm, total width: 3,600 mm, input frequency: 50 Hz, type of input current: three-phase, spindle speed (max.): 340 rpm, table bore: 125 mm, spindle speed (min.): 80 rpm, travel distance X-axis: 325 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 400 mm, overall weight: 14,800 kg, distance table to spindle center: 350 mm, tool diameter: 200 mm, controller manufacturer: Siemens Sinumerik 840D sl, drive type: Sinamics S120, control type: CNC control, Equipment: documentation/manual, rotational speed infinitely variable, A Pfauter PE 500 for the economical production of straight and helical spur gears up to module 12 and 500 mm in diameter – completely overhauled by SerWeMa with Siemens Sinumerik 840D sl, equipped with a gripper unit and a 32-position workpiece storage for unmanned operation. The machine is ready for operation in our hall in Chemnitz: you can inspect it under power, and if desired, we will mill your own sample part and you can take delivery of the machine here. No delivery time, no risk. Sold by Serwema Retrofit Solutions, the company that carried out the overhaul and knows the machine inside out. The general overhaul included complete geometric overhaul by grinding and scraping, new roller bearings in the main drive and in the milling head, measuring and reconditioning the worm gear, overhauled or new ball screw drives, overhaul of hydraulics, lubrication and coolant system, and new electrical equipment with Sinumerik 840D sl, Sinamics S120 and new axis motors. An electronic generating gear controls all generating and single-part machining processes, and an NC-controlled crash recovery protects the tool and workpiece in the event of a power or phase failure. New paint in RAL 7035/5015 with oil and coolant resistant two-component paint, acceptance of geometry according to SerWeMa protocol based on DIN ISO 6545. The machine controls six CNC axes: X radial, Y tangential, Z axial, A milling head swivel, B milling cutter drive and C table drive. The SerWeMa gear cutting software guides you through workpiece and tool data via masks, without the need for programming: up to three position-oriented gearings per workpiece, each with its own tool, up to three cuts per gearing with simultaneous or counter-rotating movement, form corrections for convex, conical and convex-conical profiles, lead-in and lead-out phase correction, chamfer milling, dimension correction via tooth width, two-roll or two-ball gauge, measuring stop, shift strategy with defect management per generating cutter and cutting force monitoring with automatic retraction. Technologies: generating milling, single-part milling and worm gear milling both radially and tangentially. A hand-held device with a handwheel allows setup directly in the working area. Technical data: max. workpiece Ø 500 mm, max. module 12, max. milling cutter Ø 200 mm, max. milling cutter length 240 mm, shift travel 200 mm, milling cutter speed 100–450 rpm, swivel angle +25°/−45°, travel radial 325 mm (axis distance 25–350 mm), travel axial 400 mm (310–710 mm), table diameter 450 mm, table bore 125 mm, connection power approx. 60 kVA. Installation dimensions incl. automation approx. 7.2 × 4.5 × 3.3 m, weight approx. 16.8 t. Chedpfez Et E Eox Afgec Equipment: machine enclosure, chip conveyor, gripper unit with two grippers, workpiece storage with 32 positions, preparation for emission extraction (150 mm nozzle, Harting connector on the machine roof). Documentation complete in German: operating manual, electrical diagrams with parts lists, hydraulic and lubrication diagrams. Serwema optionally offers: trial part milling in our factory, additional milling arbors, assembly and commissioning at your location, operator training and a control system upgrade to Sinumerik ONE. Spare parts and service come from a single source, worldwide, even after the purchase.

Condition: used, empty load weight: 6,623 kg, maximum load weight: 32,377 kg, overall weight: 39,000 kg, axle configuration: > 3 axles, first registration: 09/2018, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 3,000 mm, loading space volume: 101 m³, total length: 13,620 mm, suspension: air, tire size: 445/45 19,5, tire condition: 20 %, color: silver, Year of construction: 2018, front tire size: 445/45 19,5, rear tire size: 445/45 19,5, driver cabin: day cab, emission class: none, Equipment: ABS, truck registration, Reference number for inquiries: 41584 Schmitz, SCB S3T * Year of manufacture: 2018 * ABS, Anti-lock Braking System * EBS, Electronic Braking System * Air suspension * New tarpaulin * Neutral tarpaulin * Used tarpaulin * Edscha / Sliding roof tarpaulin * Load securing certificate DIN EN 12642 Code XL * VDI 2700 EN 12195 * Lashing eye holes in the outer frame (Multilock outer frame) * Retractable lashing eyes * Pallet stop rail * Mechanically operated lift roof * DCE 9.5 Daimler Chrysler certificate * Portal door * Aluminum side boards * Air connection, coupling head (red + yellow) * 2 x 7-pin connector * 15-pin connector * Lifting and lowering system * Ferry lashing system * Storage box / Tool box Cedpfx Ajz Ef E Rjfgehc * Galvanized * Suspension: Air * Total weight: 39,000 kg * Unladen weight: 6,623 kg * Payload: 32,377 kg * Permissible total weight: 39,000 kg * Axle manufacturer: Schmitz Rotos * Tire condition, 1st axle: 20% - 20% - Tire size: 445/45 R19.5 * Tire condition, 2nd axle: 20% - 20% - Tire size: 445/45 R19.5 * Tire condition, 3rd axle: 30% - 30% - Tire size: 445/45 R19.5 * Tire sizes: 445/45 R19.5 * Internal dimensions: L = 13,620 mm, W = 2,480 mm, H = 3,000 mm * Internal volume: 101 m³ * Pallet spaces: 34 * New tarpaulin * Second ride height, Varios * 28 mm floor panel, 7,100 kg forklift axle load * Upon request, we will send you a video and further pictures. Disclaimer: Subject to changes, prior sale and errors. You can find more pictures and videos on our website. Our comprehensive service includes, for example: * Purchase / sale / rental of commercial vehicles * Quick and uncomplicated financing * Application for all (export) documents * Ordering of export license plates / customs license plates * Vehicle preparation: New tarpaulins, lettering, painting etc. * Professional loading / load securing * TÜV inspections, registration service * Transport of commercial vehicles Ask our trained specialists, we will be happy to advise you.

Condition: used, empty load weight: 6,840 kg, maximum load weight: 32,160 kg, overall weight: 39,000 kg, axle configuration: > 3 axles, first registration: 09/2018, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 3,000 mm, loading space volume: 101 m³, total length: 13,620 mm, suspension: air, tire condition: 20 %, color: yellow, Year of construction: 2018, driver cabin: day cab, emission class: none, Equipment: ABS, truck registration, Reference number for inquiries: 41718 Kaessbohrer, Trailer * Year of manufacture: 2018 * ABS, Anti-lock Braking System * EBS, Electronic Braking System * Air suspension * Used tarpaulin * Edscha / Sliding roof cover * Load securing certificate DIN EN 12642 Code XL * Mechanical roof lifting * Portal door * Aluminum side rails * Air connection coupling head (red + yellow) * Spare tire holder * 2x7-pin connector * 15-pin connector * Storage box / Tool box * Document box * Suspension: Air * Gross vehicle weight: 39,000 kg * Tare weight: 6,840 kg * Payload: 32,160 kg * Permissible gross vehicle weight: 39,000 kg * Axle manufacturer: BPW * Internal dimensions: L=13620 mm, W=2480 mm, H=3000 mm * Internal volume: 101 m³ * Pallet spaces: 34 Chjdpoz Enrgofx Afgec * Aluminum rails in the tarpaulin Disclaimer: Subject to changes, prior sale, and errors. More photos and videos can be found on our website. Our extensive service includes, for example: * Purchase / sale / rental of commercial vehicles * Fast and straightforward financing * Application for all (export) documents * Ordering of export license plates / customs license plates * Vehicle preparation: new tarpaulins, lettering, painting, etc. * Professional loading / load securing * TÜV inspections, registration service * Transportation of commercial vehicles Please contact our trained staff; we will be happy to advise you.

Condition: used, empty load weight: 8,972 kg, maximum load weight: 27,028 kg, overall weight: 36,000 kg, axle configuration: > 3 axles, first registration: 11/2016, next inspection (TÜV): 12/2026, loading space length: 13,310 mm, loading space width: 2,460 mm, loading space height: 2,650 mm, loading space volume: 86 m³, total length: 13,310 mm, suspension: air, tire size: 385/65 22,5, tire condition: 40 %, color: beige, Year of construction: 2016, front tire size: 385/65 22,5, rear tire size: 385/65 22,5, driver cabin: day cab, emission class: none, Equipment: ABS, cooling unit, truck registration, Reference number for inquiries: 41496 Schmitz, SKO * Year of manufacture: 2016 * ABS, Anti-lock Braking System * EBS, Electronic Braking System * Air suspension * Fixed roof * Load securing certificate DIN EN 12642 Code XL * VDI 2700 EN 12195 * Portal door * Reefer box * Double-deck preparation * Spare tire holder * Connector plug 2x7-pin * Connector plug 15-pin * Lifting and lowering mechanism * Storage box/toolbox * Deep-freeze unit Cedpfx Afszhh H Eegehc * Aluminum floor * Cooling unit Carrier * Diesel + Electric * Inspections: HU/AU (Technical Inspection/Emissions Test) 12.2026 * Suspension: Air * Total weight: 36,000 kg * Unladen weight: 8,972 kg * Payload: 27,028 kg * Permissible total weight: 36,000 kg * Axle manufacturer: Schmitz Rotos * Tire condition 1st axle: 40% -- 40% - Tire size: 385/65 R22.5 * Tire condition 2nd axle: 30% -- 30% - Tire size: 385/65 R22.5 * Tire condition 3rd axle: 40% -- 40% - Tire size: 385/65 R22.5 * Tire sizes: 385/65 R22.5 * Internal dimensions: L=13310 mm, W=2460 mm, H=2650 mm * Internal volume: 87 m³ * Pallet spaces: 33 * Operating hours Diesel: 10143 hours, Electric: 6927 hours, Cooling unit tested for functionality * On request, we will send you a video and further pictures. Disclaimer: Subject to changes, prior sale and errors. Further pictures and videos can be found on our website. Our comprehensive service includes, for example: * Purchase/sale/rental of commercial vehicles * Quick and straightforward financing * Application for all (export) documents * Ordering of export license plates / customs license plates * Vehicle preparation: New tarpaulins, lettering, painting, etc. * Professional loading / cargo securing * TÜV inspections, registration service * Transport of commercial vehicles Please ask our trained specialist staff, we will be happy to advise you.

Condition: ready for operation (used), Bosch SD-B5.250.015-05.000, brushless, permanent magnet servo motor, serial number: 746000208. One connector is slightly damaged, see photo. Used, with normal signs of wear, 100% functional. Scope of delivery as shown in the photos. PLEASE NOTE: Please request separate quotes for packaging and shipping costs! Chsdpei D E U Hjfx Afgoc