Used Chip Drying Barrel for sale (7,496)

Condition: new, Year of construction: 2025, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Gsdpfx Akefzb Nie Usug Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Year of construction: 2020, condition: new, 7 "Touch Panel The large color touch panel looks aesthetically and is comfortable and intuitive to use. You will set all important parameters on it. Memory of 20 programs with 10 events It is possible to save up to 20 programs and activate up to 10 consecutive time-temperature events arranged in the heating curve. This is especially needed for more demanding processes. Information on gas / oil consumption The consumption is calculated based on the burner settings. This feature will allow you to estimate the cost of a given cycle, plan consumption and check personnel. Dual-channel recorder of USB cycle parameters Each furnace is equipped with a recorder that records all firing parameters, including two temperature channels - like in an airplane black box, on a USB flash drive. The system also enables the analysis of monthly / daily statements, including media consumption and performance. Each start of heating, opening the door, can be recreated, a few years back. Such a dedicated option is not offered by any manufacturer. It is a system developed from scratch by our programmers Automatic smoke exhaust chimney Godpefz U Hvjfx Ak Uoug The chimney can be programmed to open a few minutes before the end of the firing in order to smoke the chamber. It can be remotely controlled from the panel, it does not need to be done mechanically as in most structures. Minute forecast until the end The cycle has started, how long will it end? calculating the heating dynamics, we will count it and show on the display how much longer it will take. To open it, just pull the door. The lock has adjustable pressure of the door, to close it just push it, the lock will catch the door and automatically pull it back. In order to minimize the effect of heating the hall when opening the door, a hood is installed above the door to remove some of the heat to other places. The MTS system was created to provide a real reading of the temperature of the furnace chamber. Standard measurement is based on one temperature measurement which is often wrong.MTS is a system of many sensors located in the outermost places of the chamber. The multi-zone heating system ensures a firing quality that has been so far unique. Each normal oven has only one heating zone and only one temperature measurement! The multi zone heat system supports up to 8 independent heating zones in one oven. Each heating zone has as many as 3 temperature sensors! When there are temperature differences between zones, they are automatically equalized! The system helps to combat the problem when elements of different material thicknesses enter the furnace.

Condition: new, Year of construction: 2025, Also, different models are available! IMPORTANT: MACHINE WILL BE BRAND NEW SEE THE TECHNICAL DESCRIPTION BELOW 1. Briquette Diameter: Ø 80mm 2. Capacity: 700-900 kg/hour ( Copper ) 3. Preliminary Compression Ram Thrust: 12.5 tons 4. Main Compression Cylinder Thrust: 250 tons ( 5 tonne / cm2 ) 5. Maximum Working Pressure: 300 bars 6. Cycle Time: 12 - 14 seconds 7. Electric Motor Power: 30 kW 8. Machine Dimensions (Width x Length x Height): 2.200 mm x 2.600 mm x 2.800 mm 9. Machine Weight: 6.000 kg 10. Screw drive feeders will fill the compression chamber automatically and a built-in vibrating hopper will provide safety to the chamber by preventing the oversize material from entering the chamber. Gujdpfx Asgwa Urok Uog 11. Cylinder Rods are induction-hardened and chrome plated. 12. A Hydraulic Oil cooling system is implemented. 13. Pumps and valves of hydraulic systems are from worldwide reputable brands such as PARKER. 14. The machine is fully automatic by PLC control. 15. All electrical and electronic parts are by SCHNEIDER or SIEMENS Brand. 16. The machine is CE certificated. The marking certifies that a product has met European Directives regarding consumer safety, health, or environmental requirements. 17. Machine will be under AYMAS Makina San. Ve Tic. A. Ş. Guarantee against manufacturing defects for one (1) year or two thousand five hundred (2.500) working hours.

Condition: used, functionality: unexamined, machine/vehicle number: 4059/74, General / technical data: well preserved chip conveyor & high discharge for CNC lathe or similar machines Remark: The equipment is in our stock and can be inspected under power. The hinge is in good condition. Gujdogg Sbvopfx Ak Ueg

Year of construction: 2019, condition: like new (used), Dry air system M + H SOMOS (art.2200) M + H Somos dry air dryer RDT 250, NEW CONDITION Bj. 2019 Price: € 12.500 Contact : Mr. Rainer Eckerle Gujdpfx Aksgl A Sno Usg

Condition: new, Type CSD-HT-BR 70 Internal dimensions (width x depth x height) 7500 x 7160 x 4100 mm External dimensions (width x depth x height) 8080 x 7760 x 5500 mm The section of the structural columns of the chamber is 160 x 70 mm Snow load for the roof is 80 Kg/m2 Wind resistance of walls 27.8 m/sec Warming with glass wool Walls ǂ100mm Roof ǂ100mm Door ǂ100mm Door: sliding type, hung on a rail Wood for drying: various Loading the drying chamber with a forklift The heating system is gas Fuel - GPL gas Maximum thermal energy (300 kW) Maximum chamber temperature 75 °C The number of fans in the chamber is 5x3kw The total capacity of the fans is 162,500 m3/hour Gujdpsrxtuiefx Ak Ueg Number of probes: 4 HT/ 8 AWM/ 2 EMC/ 2 Temperature Voltage 400 V 50 Hz Total power 17kw)

Condition: good (used), Abrasive bodies, ceramic grinding bodies, polishing bodies for round vibrators, vibratory grinding systems, vibratory grinding round vibrators, trowal systems, continuous vibrators, ceramic grinding bodies -Manufacturer: Walther Trowal, ceramic grinding wheel type C 15 x 30 ZS Ultra-Chips -Grain: see photos -Price/tax: complete -Transport dimensions: 900/200/H500 mm -Total weight: 76 kg Gsdpfx Akjrxw E Ne Uoug

Condition: good (used), Year of construction: 1987, Drying oven, drying cabinet, chamber dryer oven, heating oven, heating chamber, drying oven, drying cabinet, drying and heating cabinet -Manufacturer: GFO, chamber dryer oven type KE-SO -Useful space: 1 m³ / 1000x1000x1000 mm -Heating power: 40 kW -max temperature 350°C -Working temperature: 100 to 300°C -Individual components: see photos Gusdoryalbjpfx Ak Ueg -Setup dimensions: 2510/1600/H3760 mm -Transport dimensions: 2510/1600/H2380 mm -Weight: 1500kg

Condition: used, Chip conveyor, scraper conveyor with coolant tank, BMF Type KF 200 K17 Ident. No.: Order No.: 915979 Year of manufacture: 1992 Width of metal links: 200 mm Distance between carrier bars: approx. 380 mm Length of possible chip discharge: 1100/2100 mm Insertion length: approx. 1350 mm Insertion height: 370 mm Insertion width: 460 mm Hopper width at the top: 400 mm Hopper width at the bottom: 170 mm Conveying height – discharge height: approx. 1250 mm Motor power, belt drive: 0.37 kW Mains connection: 400 volts, 50 Hz - Drive of the scraper chain via geared motor - Coolant tank without coolant pump Space requirement L x W x H: 3800 x 1300 x 1650 mm Weight of chip conveyor: approx. 500 kg Gujdpfx Akehwt H Ao Ueg Good condition The chip conveyor comes from a GILDEMEISTER CNC lathe. The conveyor is suitable for the chip transport of a milling machine, lathe, or machining center.

Condition: used, PD2052-AC2 / PD2052 AC2 / PD2052AC2, PR1800 + PD500, Hanbell Precise Machinery Co. LTD – Dry screw vacuum pump with display Gjdpfsitywrsx Ak Uoug Model: PD2052-AC2 Type: PR1800 + PD500 Condition: Used

Year of construction: 1998, condition: used, dryer dry-air KOCH CKT 1000 1000 m³/h year: 1998 price: 10.900 € contact: Mr. Rainer Eckerle Gjdpfx Asity Adek Ueug

Condition: used, Year of construction: 2013, Chip conveyor Manufacturer: BMF - BÜRENER, with filter system and high-pressure pump. Dimensions of chip conveyor: Inlet width: 600 mm, inlet height: 200 mm, conveying length: 3000 mm. Gjdpfoiicnkjx Ak Ujug

Year of construction: 2001, condition: excellent (used), I sell the 2-head 4-lamp UV-drying tunnel Cefla Ecolight TLF/BB/4+TTE 4000 Year 2001 Godpfxji Eup Ee Ak Uoug Working width 1400mm. Total length 4,00m Total power 74,3 kW Very good condition, available immediately.

Year of construction: 1994, condition: used, dryer dry-air KOCH CKT 300, 300 m³/h, year: 1994, price: 4.900 €, contact: Mr. Rainer Eckerle Guodpfsb Hu S Tex Ak Ujg

Condition: new, Year of construction: 2024, Drying and Burn-in Furnace TRO, Model I Gedpfx Aod I T Exjk Ueug For drying racks with max. 50rods, useable size 60x90cm, outer dimensions: approx. 2290mm wide x 1390mm deep x 2230mm high, useable space: approx. 1400x1070x1660cm. Suitable for vaporisation of low amounts of solvent, authorised for inks and solvents up to hazard class A II, according to safety requirements DIN EN 1539. Equipped with control of the minimum exhaust volume and a heating system in regard to the exceedance of the max. temperature. Fixing and drying temperature: up to max. 180°C. Power connection: 400V/50Hz, 21kW, weight: approx. 650kg, varnishing: corps RAL 7035 (light grey), doors RAL 7037 (dust grey). Special varnishing upon request. Chamber dryer, all-steel construction, with good thermal insulation. Simple insertion of drying racks by means of easy-to-open wing doors. The air is sucked out of the drying chamber by ventilators, is blown through thermostat-controlled heating registers and re-fed temperature-controlled to the drying chamber. The solvents released during the drying process are dissipated from the exhaust side of the ventilator while supply air gets into the drying chamber. The horizontal air guide in the drying chamber guarantees an even temperature control. The required temperature can easile adjusted via actual and nominal value thermostat. Overheating protection by safety thermostat. Particularly suitable for fixing and drying of textile inks, flock glues as well as for burning-in of plate and aluminium signs up to 180°C. - Various drying racks for different applications available. - We recommend the installation of a gas warning unit. Delivery time 10-12 weeks. ATTENTION: Not permitted for solvents! Not permitted for foods!

Condition: excellent (used), Year of construction: 2002, I sell the 2-head 2-lamp UV-drying tunnel Cefla TLE/B/2+TTE 2500 Year 2002 Working width 1400mm. Gjdst S Efgopfx Ak Uoug Total length 2,50m 2 Lamps HG 120 W + HG 120 W Total power 37,7 kW Very good condition, available immediately.

Condition: like new (used), set, packed in wooden box, screw and barrel for 150 mm extruder, Gujdpfxodm Aghs Ak Usg grooved feeding bush, screw with shearing and mixing element

Condition: repair required (used), Disc chipper Bruks IDC000127 - infeed 220 X 280 mm - without electric motor Gusdpfx Akevzw Tfs Ujg

Year of construction: 2025, condition: new, Dimensions (L/W/H) 1410x1130x1295 mm Weight 320 kg Total power requirement 22 kw Gujdpfx Ajvz Ei Iok Ujg

Year of construction: 2025, condition: new, Dimensions (L/W/H) 1510x1250x1400 mm Gusdpfx Akevz Enqj Ujg Weight 600 kg Total power requirement 30 kw

Condition: excellent (used), functionality: fully functional, Chip processing plant for the deoiling of chips of all types (can be customized to your requirements). With this system, coarse and foreign materials are not a problem! The machines are patented and specifically designed so that foreign parts in the chips are automatically ejected. Included in the scope of delivery: - SPYRA chip crusher ZE 2000 - AME hinged belt conveyor (between crusher and centrifuge) - SPYRA chip centrifuge 500H (can be replaced with the larger 600H centrifuge upon request) - Additional discharge conveyor (if required) Not included but available as optional upgrades: - Tipping and lifting device for fully automatic filling of the chip crusher - Filtration system for extracting oil from the chips for reuse - Control cabinet Technical data for the SPYRA chip crusher ZE 2000: Total height with hopper: approx. 2,318 mm Dimensions (L x W): approx. 1,500 x 800 mm Weight: 2,000 kg Motor power: 22 kW Voltage: 400 V/50 Hz Speed at tear arm: 40 rpm Torque at tear arm: 3,500 Nm Inner diameter of tearing hopper (bottom): 315 mm Inner diameter of tearing hopper (top): 782 mm Height of tearing hopper: 412 mm Hopper capacity (tearing hopper): 85 liters Hydraulic unit Motor power: 0.75 kW Pump output: 2.4 liters/min Hydraulic tank capacity: 5 liters Operating pressure: 10–80 bar Maximum pressure: 160 bar Technical data for SPYRA chip centrifuge PSZ 500 H: Outer diameter: Ø 1,160 mm Drum diameter: Ø 500 mm Feed hopper: Ø 700 mm Discharge hopper: Ø 800 mm Total height (with frame height 1,160 mm): 2,735 mm Motor power: 4 kW Connection: 400 V/50 Hz Drum speed: 1,200 rpm Hydraulic unit, Spyra standard Power: 4 kW Voltage: 400 V Gujdpsyzhdyefx Ak Uog Tank volume: 100 l Operating pressure (without oil filling): 100 bar Inspection cover bolted. No electrical monitoring. Alternative larger centrifuge PSZ 600 H: Outer diameter: Ø 1,260 mm Drum diameter: Ø 600 mm Feed hopper: Ø 700 mm Discharge hopper: Ø 900 mm Machine height without base: 1,900 mm Discharge height: 835 mm Total height (with frame height 1,160 mm): 2,735 mm Total height is variable by adjusting the frame and hopper height Motor power: 5.5 kW Connection: 400 V/50 Hz Drum speed: 1,000 rpm Hydraulic unit, Spyra standard Power: 4 kW Voltage: 400 V Tank volume: 100 l Operating pressure (without oil filling): 100 bar If needed, please contact us for a tipping and lifting device, swiveling discharge conveyor, filtration system, or control cabinet.

Condition: excellent (used), Year of construction: 2007, I sell the 2-lamp UV-drying tunnel Cefla UV 2000 M2 TTE 2000 Year 2007 Working width 1400mm. Total length 2,00m Guedpfxoyzr Agj Ak Usg Very good condition, available immediately.

Condition: like new (used), functionality: fully functional, Year of construction: 2024, operating hours: 476 h, overall weight: 11,860 kg, power: 407 kW (553.37 HP), Engine: Deutz TCD 12.0 L6, 407 kW Year of manufacture: 2024 Serial number: 21060084 Location: NRW Total operating hours: 476 h Engine operating hours (new): 91 h Rotor operating hours: 207 h Gusdpfozcn Igex Ak Uog Availability: by arrangement Equipment: 2 horizontal infeed rollers 2 vertical infeed rollers Infeed size: 1000 x 625 mm Max. log diameter: Ø 620 mm Number of knives: 3 pcs. Counter blade: 1 pc. Capacity: up to 150 m³/h Weight: 11,860 kg Radio remote control Spiral fan HD infeed chain Baskets: 50, 70, 100 mm The machine is in excellent, like-new condition and can be inspected during chipping operations by arrangement! Warranty: The machine is sold in the condition it is in at the time of delivery. The seller assumes no liability for defects. We reserve the right to make interim sales, changes and repairs. This overview serves only as a source of information and does not constitute a binding offer.

Condition: excellent (used), Year of construction: 2012, operating hours: 350 h, functionality: fully functional, machine/vehicle number: R-3176, overall weight: 5,500 kg, total width: 1,400 mm, total length: 7,000 mm, temperature: 200 °C, power: 6 kW (8.16 HP), type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, Equipment: documentation/manual, For sale is a Binder DRYON DRVF 1400×7 fluidized bed/vibrating dryer for wood chips, compost, biomass, wood shavings, and comparable bulk materials. The system was used exclusively for testing purposes and has only approximately 300–400 operating hours. It is in good condition and fully functional. Key data: (The system has previously been used for steam drying with superheated steam at approximately 200 °C. Conversion to other drying media, such as air or flue gas, is possible in principle with appropriate modifications.) - Dryer width: approx. 1,400 mm - Overall length: approx. 7,000 mm - Input capacity: approx. 2,000 kg/h wet (designed for green waste) Gjdszg Dx Uspfx Ak Usug - Output capacity: approx. 1,200 kg/h dry (designed for green waste) - Water evaporation: approx. 667 kg/h (designed for green waste) - Output moisture content: ≤ 10% (designed for green waste) - Installed electrical power: approx. 6 kW - Weight: approx. 5,500 kg Upon request, additional components for a complete drying unit can be purchased. These include a filter system, a high-performance radial fan, and the associated drive motor. (see planning drawing) Filter system: NESTRO Lufttechnik GmbH, Type Jet 9525, year of manufacture 2013, factory number FA169096, filter area 282.6 m², max. compressed air 6.0 bar, category EK004182, weight approx. 8,000 kg. Fan / drive motor: High-performance radial fan Type HRV28-450 with drive motor VEM motors GmbH, Type IE2-W21R 315MX2, year of manufacture 02/2013, motor number 180022/0001 H, power 160 kW / 218 HP, voltage 400 V, current 274 A, speed 2,973 min⁻¹, frequency 50 Hz, protection class IP55, insulation class 155, weight approx. 955 kg.

Year of construction: 2026, condition: new, DESCRIPTION Horizontal drum chipper, engineered and built for maximum performance and reliability. This heavy-duty, robust machine is suited for the most demanding conditions and is ideal for processing all types of waste wood materials. The Varli VDC-1600 drum chipper features a large infeed opening, making it highly capable of processing waste wood material, logs, and wood bundles (diameters over 700 mm can be easily accommodated). The VDC-1600 can achieve outputs of approximately 100,000 kg per hour of high-quality pulp mill chips or finer fractions suitable for biofuel production. The chipper can also deliver coarser fractions, producing chips up to 200 mm in length (depending on configuration). Built with a heavy-duty frame, the chipper features over-sized, self-aligning bearings housed in steel casings, firmly secured to the chipper’s side structure for long service life and reliable operation. Equipped with 14 feed rollers fitted with special, wear-resistant, surface-hardened teeth, the VDC-1600 provides secure feed and optimised material throughput. The chipper comes standard with drum-mounted cutting tools made from Hardox, along with replaceable wear plates. OPERATING PRINCIPLE The VDC-series is designed to produce wood chips from logs or bark bundles. Gusdpfxjyi H Rye Ak Ujg Material is horizontally fed by vibrating chute into free-floating feed rollers, which automatically adjust to the material’s height. The feed rollers securely grip and transport the material into a high-speed rotating drum armed with solid knives, fixed with centrifugal wedges—fostering durability, preventing knife damage, and minimizing downtime during tool changes. The rotor knives are easily accessible and can be re-sharpened multiple times. Key features include an adjustable stator knife, hydraulic hood, and hydraulic device for stator knife exchange. BENEFITS - Extremely robust construction and heavy-duty design for stable operation - Centrifugal wedge knife mounting for reduced machine downtime - Adjustable stator knife to extend operating life - Hydraulic hood for swift and easy maintenance TECHNICAL DATA Model: VDC-1600 Infeed Width: 1250 mm Rotor Diameter: 1600 mm Number of Infeed Rollers: 14 Number of Cutting Tools (Knives): 4 Drive Motor(s): 2 x 400 kW Electrical Supply: 400V, 3Phase, 50Hz Fraction Output: 60 mm (SPF), approx. 100,000 kg/h Total Weight: 96,000 kg